Commit | Line | Data |
---|---|---|
9cbc3493 J |
1 | /* |
2 | * linux/arch/arm/mach-omap2/board-omap3evm.c | |
3 | * | |
4 | * Copyright (C) 2008 Guangzhou EMA-Tech | |
5 | * | |
6 | * Modified from mach-omap2/board-omap3evm.c | |
7 | * | |
8 | * Initial code: Syed Mohammed Khasim | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/init.h> | |
17 | #include <linux/platform_device.h> | |
18 | #include <linux/delay.h> | |
19 | #include <linux/err.h> | |
20 | #include <linux/clk.h> | |
21 | #include <linux/io.h> | |
22 | #include <linux/leds.h> | |
23 | #include <linux/gpio.h> | |
24 | #include <linux/input.h> | |
25 | #include <linux/gpio_keys.h> | |
26 | ||
5b3689f4 | 27 | #include <linux/regulator/fixed.h> |
9cbc3493 J |
28 | #include <linux/regulator/machine.h> |
29 | #include <linux/i2c/twl.h> | |
3a63833e | 30 | #include <linux/mmc/host.h> |
dbc04161 TL |
31 | #include <linux/input/matrix_keypad.h> |
32 | #include <linux/spi/spi.h> | |
33 | #include <linux/interrupt.h> | |
34 | #include <linux/smsc911x.h> | |
25f73ed5 | 35 | #include <linux/platform_data/at24.h> |
51482be9 | 36 | #include <linux/usb/phy.h> |
9cbc3493 | 37 | |
9cbc3493 J |
38 | #include <asm/mach-types.h> |
39 | #include <asm/mach/arch.h> | |
40 | #include <asm/mach/map.h> | |
41 | #include <asm/mach/flash.h> | |
42 | ||
4e65331c | 43 | #include "common.h" |
3ef5d007 | 44 | #include "gpmc.h" |
2203747c | 45 | #include <linux/platform_data/mtd-nand-omap2.h> |
a0b38cc4 | 46 | #include <video/omapdss.h> |
a0d8dde9 | 47 | #include <video/omap-panel-data.h> |
9cbc3493 | 48 | |
2203747c | 49 | #include <linux/platform_data/spi-omap2-mcspi.h> |
9cbc3493 J |
50 | |
51 | #include "sdram-micron-mt46h32m32lf-6.h" | |
52 | #include "mux.h" | |
53 | #include "hsmmc.h" | |
96974a24 | 54 | #include "common-board-devices.h" |
9cbc3493 J |
55 | |
56 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) | |
ac839b3c | 57 | #include "gpmc-smsc911x.h" |
21b42731 | 58 | |
9cbc3493 J |
59 | #define OMAP3STALKER_ETHR_START 0x2c000000 |
60 | #define OMAP3STALKER_ETHR_SIZE 1024 | |
61 | #define OMAP3STALKER_ETHR_GPIO_IRQ 19 | |
62 | #define OMAP3STALKER_SMC911X_CS 5 | |
63 | ||
21b42731 MR |
64 | static struct omap_smsc911x_platform_data smsc911x_cfg = { |
65 | .cs = OMAP3STALKER_SMC911X_CS, | |
66 | .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, | |
67 | .gpio_reset = -EINVAL, | |
9cbc3493 J |
68 | .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), |
69 | }; | |
70 | ||
9cbc3493 J |
71 | static inline void __init omap3stalker_init_eth(void) |
72 | { | |
9cbc3493 | 73 | omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); |
21b42731 | 74 | gpmc_smsc911x_init(&smsc911x_cfg); |
9cbc3493 J |
75 | } |
76 | ||
77 | #else | |
78 | static inline void __init omap3stalker_init_eth(void) | |
79 | { | |
80 | return; | |
81 | } | |
82 | #endif | |
83 | ||
84 | /* | |
85 | * OMAP3 DSS control signals | |
86 | */ | |
87 | ||
88 | #define DSS_ENABLE_GPIO 199 | |
89 | #define LCD_PANEL_BKLIGHT_GPIO 210 | |
90 | #define ENABLE_VPLL2_DEV_GRP 0xE0 | |
91 | ||
9cbc3493 J |
92 | static void __init omap3_stalker_display_init(void) |
93 | { | |
94 | return; | |
95 | } | |
07eb40bd TV |
96 | static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { |
97 | .name = "dvi", | |
98 | .source = "tfp410.0", | |
99 | .i2c_bus_num = -1, | |
100 | }; | |
9cbc3493 | 101 | |
07eb40bd TV |
102 | static struct platform_device omap3stalker_dvi_connector_device = { |
103 | .name = "connector-dvi", | |
104 | .id = 0, | |
105 | .dev.platform_data = &omap3stalker_dvi_connector_pdata, | |
9cbc3493 J |
106 | }; |
107 | ||
07eb40bd TV |
108 | static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { |
109 | .name = "tfp410.0", | |
110 | .source = "dpi.0", | |
111 | .data_lines = 24, | |
112 | .power_down_gpio = DSS_ENABLE_GPIO, | |
89747c91 BW |
113 | }; |
114 | ||
07eb40bd TV |
115 | static struct platform_device omap3stalker_tfp410_device = { |
116 | .name = "tfp410", | |
117 | .id = 0, | |
118 | .dev.platform_data = &omap3stalker_tfp410_pdata, | |
119 | }; | |
120 | ||
121 | static struct connector_atv_platform_data omap3stalker_tv_pdata = { | |
122 | .name = "tv", | |
123 | .source = "venc.0", | |
07eb40bd | 124 | .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, |
07eb40bd | 125 | .invert_polarity = false, |
9cbc3493 J |
126 | }; |
127 | ||
07eb40bd TV |
128 | static struct platform_device omap3stalker_tv_connector_device = { |
129 | .name = "connector-analog-tv", | |
130 | .id = 0, | |
131 | .dev.platform_data = &omap3stalker_tv_pdata, | |
9cbc3493 J |
132 | }; |
133 | ||
134 | static struct omap_dss_board_info omap3_stalker_dss_data = { | |
07eb40bd | 135 | .default_display_name = "dvi", |
9cbc3493 J |
136 | }; |
137 | ||
786b01a8 OD |
138 | static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { |
139 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), | |
9cbc3493 J |
140 | }; |
141 | ||
786b01a8 OD |
142 | static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { |
143 | REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), | |
9cbc3493 J |
144 | }; |
145 | ||
146 | /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ | |
147 | static struct regulator_init_data omap3stalker_vmmc1 = { | |
148 | .constraints = { | |
149 | .min_uV = 1850000, | |
150 | .max_uV = 3150000, | |
151 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
152 | | REGULATOR_MODE_STANDBY, | |
153 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
154 | | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, | |
155 | }, | |
786b01a8 OD |
156 | .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), |
157 | .consumer_supplies = omap3stalker_vmmc1_supply, | |
9cbc3493 J |
158 | }; |
159 | ||
160 | /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ | |
161 | static struct regulator_init_data omap3stalker_vsim = { | |
162 | .constraints = { | |
163 | .min_uV = 1800000, | |
164 | .max_uV = 3000000, | |
165 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
166 | | REGULATOR_MODE_STANDBY, | |
167 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
168 | | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, | |
169 | }, | |
786b01a8 OD |
170 | .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), |
171 | .consumer_supplies = omap3stalker_vsim_supply, | |
9cbc3493 J |
172 | }; |
173 | ||
174 | static struct omap2_hsmmc_info mmc[] = { | |
175 | { | |
3b972bf0 TL |
176 | .mmc = 1, |
177 | .caps = MMC_CAP_4_BIT_DATA, | |
178 | .gpio_cd = -EINVAL, | |
179 | .gpio_wp = 23, | |
180 | .deferred = true, | |
9cbc3493 J |
181 | }, |
182 | {} /* Terminator */ | |
183 | }; | |
184 | ||
185 | static struct gpio_keys_button gpio_buttons[] = { | |
186 | { | |
187 | .code = BTN_EXTRA, | |
188 | .gpio = 18, | |
189 | .desc = "user", | |
190 | .wakeup = 1, | |
191 | }, | |
192 | }; | |
193 | ||
194 | static struct gpio_keys_platform_data gpio_key_info = { | |
195 | .buttons = gpio_buttons, | |
196 | .nbuttons = ARRAY_SIZE(gpio_buttons), | |
197 | }; | |
198 | ||
199 | static struct platform_device keys_gpio = { | |
200 | .name = "gpio-keys", | |
201 | .id = -1, | |
202 | .dev = { | |
203 | .platform_data = &gpio_key_info, | |
204 | }, | |
205 | }; | |
206 | ||
207 | static struct gpio_led gpio_leds[] = { | |
208 | { | |
209 | .name = "stalker:D8:usr0", | |
210 | .default_trigger = "default-on", | |
211 | .gpio = 126, | |
212 | }, | |
213 | { | |
214 | .name = "stalker:D9:usr1", | |
215 | .default_trigger = "default-on", | |
216 | .gpio = 127, | |
217 | }, | |
218 | { | |
219 | .name = "stalker:D3:mmc0", | |
220 | .gpio = -EINVAL, /* gets replaced */ | |
221 | .active_low = true, | |
222 | .default_trigger = "mmc0", | |
223 | }, | |
224 | { | |
225 | .name = "stalker:D4:heartbeat", | |
226 | .gpio = -EINVAL, /* gets replaced */ | |
227 | .active_low = true, | |
228 | .default_trigger = "heartbeat", | |
229 | }, | |
230 | }; | |
231 | ||
232 | static struct gpio_led_platform_data gpio_led_info = { | |
233 | .leds = gpio_leds, | |
234 | .num_leds = ARRAY_SIZE(gpio_leds), | |
235 | }; | |
236 | ||
237 | static struct platform_device leds_gpio = { | |
238 | .name = "leds-gpio", | |
239 | .id = -1, | |
240 | .dev = { | |
241 | .platform_data = &gpio_led_info, | |
242 | }, | |
243 | }; | |
244 | ||
245 | static int | |
246 | omap3stalker_twl_gpio_setup(struct device *dev, | |
247 | unsigned gpio, unsigned ngpio) | |
248 | { | |
249 | /* gpio + 0 is "mmc0_cd" (input/IRQ) */ | |
9cbc3493 | 250 | mmc[0].gpio_cd = gpio + 0; |
3b972bf0 | 251 | omap_hsmmc_late_init(mmc); |
9cbc3493 | 252 | |
9cbc3493 J |
253 | /* |
254 | * Most GPIOs are for USB OTG. Some are mostly sent to | |
255 | * the P2 connector; notably LEDA for the LCD backlight. | |
256 | */ | |
257 | ||
258 | /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ | |
bc593f5d IG |
259 | gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, |
260 | "EN_LCD_BKL"); | |
9cbc3493 J |
261 | |
262 | /* gpio + 7 == DVI Enable */ | |
bc593f5d | 263 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); |
9cbc3493 J |
264 | |
265 | /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ | |
266 | gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; | |
267 | /* GPIO + 13 == ledsync (out, heartbeat) */ | |
268 | gpio_leds[3].gpio = gpio + 13; | |
269 | ||
270 | platform_device_register(&leds_gpio); | |
271 | return 0; | |
272 | } | |
273 | ||
274 | static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { | |
9cbc3493 J |
275 | .use_leds = true, |
276 | .setup = omap3stalker_twl_gpio_setup, | |
277 | }; | |
278 | ||
bead4375 | 279 | static uint32_t board_keymap[] = { |
9cbc3493 J |
280 | KEY(0, 0, KEY_LEFT), |
281 | KEY(0, 1, KEY_DOWN), | |
282 | KEY(0, 2, KEY_ENTER), | |
283 | KEY(0, 3, KEY_M), | |
284 | ||
285 | KEY(1, 0, KEY_RIGHT), | |
286 | KEY(1, 1, KEY_UP), | |
287 | KEY(1, 2, KEY_I), | |
288 | KEY(1, 3, KEY_N), | |
289 | ||
290 | KEY(2, 0, KEY_A), | |
291 | KEY(2, 1, KEY_E), | |
292 | KEY(2, 2, KEY_J), | |
293 | KEY(2, 3, KEY_O), | |
294 | ||
295 | KEY(3, 0, KEY_B), | |
296 | KEY(3, 1, KEY_F), | |
297 | KEY(3, 2, KEY_K), | |
298 | KEY(3, 3, KEY_P) | |
299 | }; | |
300 | ||
301 | static struct matrix_keymap_data board_map_data = { | |
302 | .keymap = board_keymap, | |
303 | .keymap_size = ARRAY_SIZE(board_keymap), | |
304 | }; | |
305 | ||
306 | static struct twl4030_keypad_data omap3stalker_kp_data = { | |
307 | .keymap_data = &board_map_data, | |
308 | .rows = 4, | |
309 | .cols = 4, | |
310 | .rep = 1, | |
311 | }; | |
312 | ||
9cbc3493 | 313 | static struct twl4030_platform_data omap3stalker_twldata = { |
9cbc3493 J |
314 | /* platform_data for children goes here */ |
315 | .keypad = &omap3stalker_kp_data, | |
9cbc3493 | 316 | .gpio = &omap3stalker_gpio_data, |
fbd8071c MR |
317 | .vmmc1 = &omap3stalker_vmmc1, |
318 | .vsim = &omap3stalker_vsim, | |
9cbc3493 J |
319 | }; |
320 | ||
321 | static struct at24_platform_data fram_info = { | |
322 | .byte_len = (64 * 1024) / 8, | |
323 | .page_size = 8192, | |
324 | .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO, | |
325 | }; | |
326 | ||
327 | static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { | |
328 | { | |
329 | I2C_BOARD_INFO("24c64", 0x50), | |
330 | .flags = I2C_CLIENT_WAKE, | |
331 | .platform_data = &fram_info, | |
332 | }, | |
333 | }; | |
334 | ||
335 | static int __init omap3_stalker_i2c_init(void) | |
336 | { | |
827ed9ae PU |
337 | omap3_pmic_get_config(&omap3stalker_twldata, |
338 | TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | | |
b252b0ef PU |
339 | TWL_COMMON_PDATA_AUDIO, |
340 | TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); | |
341 | ||
342 | omap3stalker_twldata.vdac->constraints.apply_uV = true; | |
343 | omap3stalker_twldata.vpll2->constraints.apply_uV = true; | |
344 | omap3stalker_twldata.vpll2->constraints.name = "VDVI"; | |
345 | ||
fbd8071c | 346 | omap3_pmic_init("twl4030", &omap3stalker_twldata); |
9cbc3493 J |
347 | omap_register_i2c_bus(2, 400, NULL, 0); |
348 | omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, | |
349 | ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); | |
350 | return 0; | |
351 | } | |
352 | ||
353 | #define OMAP3_STALKER_TS_GPIO 175 | |
9cbc3493 | 354 | |
af29470b RQ |
355 | static struct usbhs_phy_data phy_data[] __initdata = { |
356 | { | |
357 | .port = 2, | |
358 | .reset_gpio = 21, | |
359 | .vcc_gpio = -EINVAL, | |
360 | }, | |
361 | }; | |
362 | ||
9cbc3493 | 363 | static struct platform_device *omap3_stalker_devices[] __initdata = { |
9cbc3493 | 364 | &keys_gpio, |
07eb40bd TV |
365 | &omap3stalker_tfp410_device, |
366 | &omap3stalker_dvi_connector_device, | |
367 | &omap3stalker_tv_connector_device, | |
9cbc3493 J |
368 | }; |
369 | ||
42973159 | 370 | static struct usbhs_omap_platform_data usbhs_bdata __initdata = { |
181b250c | 371 | .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, |
9cbc3493 J |
372 | }; |
373 | ||
374 | #ifdef CONFIG_OMAP_MUX | |
375 | static struct omap_board_mux board_mux[] __initdata = { | |
376 | OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | | |
377 | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), | |
378 | OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | | |
379 | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), | |
380 | {.reg_offset = OMAP_MUX_TERMINATOR}, | |
381 | }; | |
9cbc3493 J |
382 | #endif |
383 | ||
5b3689f4 RD |
384 | static struct regulator_consumer_supply dummy_supplies[] = { |
385 | REGULATOR_SUPPLY("vddvario", "smsc911x.0"), | |
386 | REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), | |
387 | }; | |
388 | ||
9cbc3493 J |
389 | static void __init omap3_stalker_init(void) |
390 | { | |
5b3689f4 | 391 | regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
9cbc3493 J |
392 | omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); |
393 | ||
d1589f09 | 394 | omap_mux_init_gpio(23, OMAP_PIN_INPUT); |
3b972bf0 | 395 | omap_hsmmc_init(mmc); |
d1589f09 | 396 | |
9cbc3493 J |
397 | omap3_stalker_i2c_init(); |
398 | ||
399 | platform_add_devices(omap3_stalker_devices, | |
400 | ARRAY_SIZE(omap3_stalker_devices)); | |
401 | ||
d5e13227 | 402 | omap_display_init(&omap3_stalker_dss_data); |
9cbc3493 J |
403 | |
404 | omap_serial_init(); | |
a4ca9dbe | 405 | omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); |
51482be9 | 406 | usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); |
9e18630b | 407 | usb_musb_init(NULL); |
af29470b RQ |
408 | |
409 | usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); | |
9e64bb1e | 410 | usbhs_init(&usbhs_bdata); |
96974a24 | 411 | omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); |
9cbc3493 J |
412 | |
413 | omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); | |
414 | omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); | |
415 | ||
416 | omap3stalker_init_eth(); | |
417 | omap3_stalker_display_init(); | |
418 | /* Ensure SDRC pins are mux'd for self-refresh */ | |
419 | omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); | |
420 | omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); | |
421 | } | |
422 | ||
9cbc3493 J |
423 | MACHINE_START(SBC3530, "OMAP3 STALKER") |
424 | /* Maintainer: Jason Lam -lzg@ema-tech.com */ | |
5e52b435 | 425 | .atag_offset = 0x100, |
869fef41 | 426 | .map_io = omap3_map_io, |
8f5b5a41 | 427 | .init_early = omap35xx_init_early, |
be732460 | 428 | .init_irq = omap3_init_irq, |
6b2f55d7 | 429 | .handle_irq = omap3_intc_handle_irq, |
9cbc3493 | 430 | .init_machine = omap3_stalker_init, |
bbd707ac | 431 | .init_late = omap35xx_init_late, |
6bb27d73 | 432 | .init_time = omap3_secure_sync32k_timer_init, |
187e3e06 | 433 | .restart = omap3xxx_restart, |
9cbc3493 | 434 | MACHINE_END |