Commit | Line | Data |
---|---|---|
9cbc3493 J |
1 | /* |
2 | * linux/arch/arm/mach-omap2/board-omap3evm.c | |
3 | * | |
4 | * Copyright (C) 2008 Guangzhou EMA-Tech | |
5 | * | |
6 | * Modified from mach-omap2/board-omap3evm.c | |
7 | * | |
8 | * Initial code: Syed Mohammed Khasim | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/init.h> | |
17 | #include <linux/platform_device.h> | |
18 | #include <linux/delay.h> | |
19 | #include <linux/err.h> | |
20 | #include <linux/clk.h> | |
21 | #include <linux/io.h> | |
22 | #include <linux/leds.h> | |
23 | #include <linux/gpio.h> | |
24 | #include <linux/input.h> | |
25 | #include <linux/gpio_keys.h> | |
26 | ||
27 | #include <linux/regulator/machine.h> | |
28 | #include <linux/i2c/twl.h> | |
3a63833e | 29 | #include <linux/mmc/host.h> |
9cbc3493 J |
30 | |
31 | #include <mach/hardware.h> | |
32 | #include <asm/mach-types.h> | |
33 | #include <asm/mach/arch.h> | |
34 | #include <asm/mach/map.h> | |
35 | #include <asm/mach/flash.h> | |
36 | ||
37 | #include <plat/board.h> | |
38 | #include <plat/common.h> | |
39 | #include <plat/gpmc.h> | |
40 | #include <plat/nand.h> | |
41 | #include <plat/usb.h> | |
9cbc3493 | 42 | #include <plat/display.h> |
89747c91 | 43 | #include <plat/panel-generic-dpi.h> |
9cbc3493 J |
44 | |
45 | #include <plat/mcspi.h> | |
46 | #include <linux/input/matrix_keypad.h> | |
47 | #include <linux/spi/spi.h> | |
9cbc3493 J |
48 | #include <linux/interrupt.h> |
49 | #include <linux/smsc911x.h> | |
50 | #include <linux/i2c/at24.h> | |
51 | ||
52 | #include "sdram-micron-mt46h32m32lf-6.h" | |
53 | #include "mux.h" | |
54 | #include "hsmmc.h" | |
04aeae77 | 55 | #include "timer-gp.h" |
96974a24 | 56 | #include "common-board-devices.h" |
9cbc3493 J |
57 | |
58 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) | |
21b42731 MR |
59 | #include <plat/gpmc-smsc911x.h> |
60 | ||
9cbc3493 J |
61 | #define OMAP3STALKER_ETHR_START 0x2c000000 |
62 | #define OMAP3STALKER_ETHR_SIZE 1024 | |
63 | #define OMAP3STALKER_ETHR_GPIO_IRQ 19 | |
64 | #define OMAP3STALKER_SMC911X_CS 5 | |
65 | ||
21b42731 MR |
66 | static struct omap_smsc911x_platform_data smsc911x_cfg = { |
67 | .cs = OMAP3STALKER_SMC911X_CS, | |
68 | .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, | |
69 | .gpio_reset = -EINVAL, | |
9cbc3493 J |
70 | .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), |
71 | }; | |
72 | ||
9cbc3493 J |
73 | static inline void __init omap3stalker_init_eth(void) |
74 | { | |
9cbc3493 J |
75 | struct clk *l3ck; |
76 | unsigned int rate; | |
77 | ||
9cbc3493 J |
78 | l3ck = clk_get(NULL, "l3_ck"); |
79 | if (IS_ERR(l3ck)) | |
80 | rate = 100000000; | |
81 | else | |
82 | rate = clk_get_rate(l3ck); | |
83 | ||
84 | omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); | |
21b42731 | 85 | gpmc_smsc911x_init(&smsc911x_cfg); |
9cbc3493 J |
86 | } |
87 | ||
88 | #else | |
89 | static inline void __init omap3stalker_init_eth(void) | |
90 | { | |
91 | return; | |
92 | } | |
93 | #endif | |
94 | ||
95 | /* | |
96 | * OMAP3 DSS control signals | |
97 | */ | |
98 | ||
99 | #define DSS_ENABLE_GPIO 199 | |
100 | #define LCD_PANEL_BKLIGHT_GPIO 210 | |
101 | #define ENABLE_VPLL2_DEV_GRP 0xE0 | |
102 | ||
103 | static int lcd_enabled; | |
104 | static int dvi_enabled; | |
105 | ||
106 | static void __init omap3_stalker_display_init(void) | |
107 | { | |
108 | return; | |
109 | } | |
110 | ||
111 | static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev) | |
112 | { | |
113 | if (dvi_enabled) { | |
114 | printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); | |
115 | return -EINVAL; | |
116 | } | |
117 | gpio_set_value(DSS_ENABLE_GPIO, 1); | |
118 | gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1); | |
119 | lcd_enabled = 1; | |
120 | return 0; | |
121 | } | |
122 | ||
123 | static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev) | |
124 | { | |
125 | gpio_set_value(DSS_ENABLE_GPIO, 0); | |
126 | gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0); | |
127 | lcd_enabled = 0; | |
128 | } | |
129 | ||
89747c91 BW |
130 | static struct panel_generic_dpi_data lcd_panel = { |
131 | .name = "generic", | |
132 | .platform_enable = omap3_stalker_enable_lcd, | |
133 | .platform_disable = omap3_stalker_disable_lcd, | |
134 | }; | |
135 | ||
9cbc3493 J |
136 | static struct omap_dss_device omap3_stalker_lcd_device = { |
137 | .name = "lcd", | |
89747c91 BW |
138 | .driver_name = "generic_dpi_panel", |
139 | .data = &lcd_panel, | |
9cbc3493 J |
140 | .phy.dpi.data_lines = 24, |
141 | .type = OMAP_DISPLAY_TYPE_DPI, | |
9cbc3493 J |
142 | }; |
143 | ||
144 | static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) | |
145 | { | |
146 | return 0; | |
147 | } | |
148 | ||
149 | static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) | |
150 | { | |
151 | } | |
152 | ||
153 | static struct omap_dss_device omap3_stalker_tv_device = { | |
154 | .name = "tv", | |
155 | .driver_name = "venc", | |
156 | .type = OMAP_DISPLAY_TYPE_VENC, | |
157 | #if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) | |
158 | .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, | |
159 | #elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) | |
160 | .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, | |
161 | #endif | |
162 | .platform_enable = omap3_stalker_enable_tv, | |
163 | .platform_disable = omap3_stalker_disable_tv, | |
164 | }; | |
165 | ||
166 | static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev) | |
167 | { | |
168 | if (lcd_enabled) { | |
169 | printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); | |
170 | return -EINVAL; | |
171 | } | |
172 | gpio_set_value(DSS_ENABLE_GPIO, 1); | |
173 | dvi_enabled = 1; | |
174 | return 0; | |
175 | } | |
176 | ||
177 | static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) | |
178 | { | |
179 | gpio_set_value(DSS_ENABLE_GPIO, 0); | |
180 | dvi_enabled = 0; | |
181 | } | |
182 | ||
89747c91 BW |
183 | static struct panel_generic_dpi_data dvi_panel = { |
184 | .name = "generic", | |
185 | .platform_enable = omap3_stalker_enable_dvi, | |
186 | .platform_disable = omap3_stalker_disable_dvi, | |
187 | }; | |
188 | ||
9cbc3493 J |
189 | static struct omap_dss_device omap3_stalker_dvi_device = { |
190 | .name = "dvi", | |
9cbc3493 | 191 | .type = OMAP_DISPLAY_TYPE_DPI, |
89747c91 BW |
192 | .driver_name = "generic_dpi_panel", |
193 | .data = &dvi_panel, | |
9cbc3493 | 194 | .phy.dpi.data_lines = 24, |
9cbc3493 J |
195 | }; |
196 | ||
197 | static struct omap_dss_device *omap3_stalker_dss_devices[] = { | |
198 | &omap3_stalker_lcd_device, | |
199 | &omap3_stalker_tv_device, | |
200 | &omap3_stalker_dvi_device, | |
201 | }; | |
202 | ||
203 | static struct omap_dss_board_info omap3_stalker_dss_data = { | |
204 | .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices), | |
205 | .devices = omap3_stalker_dss_devices, | |
206 | .default_device = &omap3_stalker_dvi_device, | |
207 | }; | |
208 | ||
9cbc3493 J |
209 | static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { |
210 | .supply = "vmmc", | |
211 | }; | |
212 | ||
213 | static struct regulator_consumer_supply omap3stalker_vsim_supply = { | |
214 | .supply = "vmmc_aux", | |
215 | }; | |
216 | ||
217 | /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ | |
218 | static struct regulator_init_data omap3stalker_vmmc1 = { | |
219 | .constraints = { | |
220 | .min_uV = 1850000, | |
221 | .max_uV = 3150000, | |
222 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
223 | | REGULATOR_MODE_STANDBY, | |
224 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
225 | | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, | |
226 | }, | |
227 | .num_consumer_supplies = 1, | |
228 | .consumer_supplies = &omap3stalker_vmmc1_supply, | |
229 | }; | |
230 | ||
231 | /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ | |
232 | static struct regulator_init_data omap3stalker_vsim = { | |
233 | .constraints = { | |
234 | .min_uV = 1800000, | |
235 | .max_uV = 3000000, | |
236 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
237 | | REGULATOR_MODE_STANDBY, | |
238 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
239 | | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, | |
240 | }, | |
241 | .num_consumer_supplies = 1, | |
242 | .consumer_supplies = &omap3stalker_vsim_supply, | |
243 | }; | |
244 | ||
245 | static struct omap2_hsmmc_info mmc[] = { | |
246 | { | |
247 | .mmc = 1, | |
3a63833e | 248 | .caps = MMC_CAP_4_BIT_DATA, |
9cbc3493 J |
249 | .gpio_cd = -EINVAL, |
250 | .gpio_wp = 23, | |
251 | }, | |
252 | {} /* Terminator */ | |
253 | }; | |
254 | ||
255 | static struct gpio_keys_button gpio_buttons[] = { | |
256 | { | |
257 | .code = BTN_EXTRA, | |
258 | .gpio = 18, | |
259 | .desc = "user", | |
260 | .wakeup = 1, | |
261 | }, | |
262 | }; | |
263 | ||
264 | static struct gpio_keys_platform_data gpio_key_info = { | |
265 | .buttons = gpio_buttons, | |
266 | .nbuttons = ARRAY_SIZE(gpio_buttons), | |
267 | }; | |
268 | ||
269 | static struct platform_device keys_gpio = { | |
270 | .name = "gpio-keys", | |
271 | .id = -1, | |
272 | .dev = { | |
273 | .platform_data = &gpio_key_info, | |
274 | }, | |
275 | }; | |
276 | ||
277 | static struct gpio_led gpio_leds[] = { | |
278 | { | |
279 | .name = "stalker:D8:usr0", | |
280 | .default_trigger = "default-on", | |
281 | .gpio = 126, | |
282 | }, | |
283 | { | |
284 | .name = "stalker:D9:usr1", | |
285 | .default_trigger = "default-on", | |
286 | .gpio = 127, | |
287 | }, | |
288 | { | |
289 | .name = "stalker:D3:mmc0", | |
290 | .gpio = -EINVAL, /* gets replaced */ | |
291 | .active_low = true, | |
292 | .default_trigger = "mmc0", | |
293 | }, | |
294 | { | |
295 | .name = "stalker:D4:heartbeat", | |
296 | .gpio = -EINVAL, /* gets replaced */ | |
297 | .active_low = true, | |
298 | .default_trigger = "heartbeat", | |
299 | }, | |
300 | }; | |
301 | ||
302 | static struct gpio_led_platform_data gpio_led_info = { | |
303 | .leds = gpio_leds, | |
304 | .num_leds = ARRAY_SIZE(gpio_leds), | |
305 | }; | |
306 | ||
307 | static struct platform_device leds_gpio = { | |
308 | .name = "leds-gpio", | |
309 | .id = -1, | |
310 | .dev = { | |
311 | .platform_data = &gpio_led_info, | |
312 | }, | |
313 | }; | |
314 | ||
315 | static int | |
316 | omap3stalker_twl_gpio_setup(struct device *dev, | |
317 | unsigned gpio, unsigned ngpio) | |
318 | { | |
319 | /* gpio + 0 is "mmc0_cd" (input/IRQ) */ | |
320 | omap_mux_init_gpio(23, OMAP_PIN_INPUT); | |
321 | mmc[0].gpio_cd = gpio + 0; | |
322 | omap2_hsmmc_init(mmc); | |
323 | ||
324 | /* link regulators to MMC adapters */ | |
325 | omap3stalker_vmmc1_supply.dev = mmc[0].dev; | |
326 | omap3stalker_vsim_supply.dev = mmc[0].dev; | |
327 | ||
328 | /* | |
329 | * Most GPIOs are for USB OTG. Some are mostly sent to | |
330 | * the P2 connector; notably LEDA for the LCD backlight. | |
331 | */ | |
332 | ||
333 | /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ | |
334 | gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); | |
335 | gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); | |
336 | ||
337 | /* gpio + 7 == DVI Enable */ | |
338 | gpio_request(gpio + 7, "EN_DVI"); | |
339 | gpio_direction_output(gpio + 7, 0); | |
340 | ||
341 | /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ | |
342 | gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; | |
343 | /* GPIO + 13 == ledsync (out, heartbeat) */ | |
344 | gpio_leds[3].gpio = gpio + 13; | |
345 | ||
346 | platform_device_register(&leds_gpio); | |
347 | return 0; | |
348 | } | |
349 | ||
350 | static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { | |
351 | .gpio_base = OMAP_MAX_GPIO_LINES, | |
352 | .irq_base = TWL4030_GPIO_IRQ_BASE, | |
353 | .irq_end = TWL4030_GPIO_IRQ_END, | |
354 | .use_leds = true, | |
355 | .setup = omap3stalker_twl_gpio_setup, | |
356 | }; | |
357 | ||
358 | static struct twl4030_usb_data omap3stalker_usb_data = { | |
359 | .usb_mode = T2_USB_MODE_ULPI, | |
360 | }; | |
361 | ||
bead4375 | 362 | static uint32_t board_keymap[] = { |
9cbc3493 J |
363 | KEY(0, 0, KEY_LEFT), |
364 | KEY(0, 1, KEY_DOWN), | |
365 | KEY(0, 2, KEY_ENTER), | |
366 | KEY(0, 3, KEY_M), | |
367 | ||
368 | KEY(1, 0, KEY_RIGHT), | |
369 | KEY(1, 1, KEY_UP), | |
370 | KEY(1, 2, KEY_I), | |
371 | KEY(1, 3, KEY_N), | |
372 | ||
373 | KEY(2, 0, KEY_A), | |
374 | KEY(2, 1, KEY_E), | |
375 | KEY(2, 2, KEY_J), | |
376 | KEY(2, 3, KEY_O), | |
377 | ||
378 | KEY(3, 0, KEY_B), | |
379 | KEY(3, 1, KEY_F), | |
380 | KEY(3, 2, KEY_K), | |
381 | KEY(3, 3, KEY_P) | |
382 | }; | |
383 | ||
384 | static struct matrix_keymap_data board_map_data = { | |
385 | .keymap = board_keymap, | |
386 | .keymap_size = ARRAY_SIZE(board_keymap), | |
387 | }; | |
388 | ||
389 | static struct twl4030_keypad_data omap3stalker_kp_data = { | |
390 | .keymap_data = &board_map_data, | |
391 | .rows = 4, | |
392 | .cols = 4, | |
393 | .rep = 1, | |
394 | }; | |
395 | ||
396 | static struct twl4030_madc_platform_data omap3stalker_madc_data = { | |
397 | .irq_line = 1, | |
398 | }; | |
399 | ||
6a58baf8 | 400 | static struct twl4030_codec_audio_data omap3stalker_audio_data; |
9cbc3493 J |
401 | |
402 | static struct twl4030_codec_data omap3stalker_codec_data = { | |
403 | .audio_mclk = 26000000, | |
404 | .audio = &omap3stalker_audio_data, | |
405 | }; | |
406 | ||
1dde9732 | 407 | static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = |
30ea50c9 | 408 | REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); |
9cbc3493 J |
409 | |
410 | /* VDAC for DSS driving S-Video */ | |
411 | static struct regulator_init_data omap3_stalker_vdac = { | |
412 | .constraints = { | |
413 | .min_uV = 1800000, | |
414 | .max_uV = 1800000, | |
415 | .apply_uV = true, | |
416 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
417 | | REGULATOR_MODE_STANDBY, | |
418 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
419 | | REGULATOR_CHANGE_STATUS, | |
420 | }, | |
421 | .num_consumer_supplies = 1, | |
422 | .consumer_supplies = &omap3_stalker_vdda_dac_supply, | |
423 | }; | |
424 | ||
425 | /* VPLL2 for digital video outputs */ | |
c8aac01b SG |
426 | static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { |
427 | REGULATOR_SUPPLY("vdds_dsi", "omapdss"), | |
428 | REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), | |
429 | }; | |
9cbc3493 J |
430 | |
431 | static struct regulator_init_data omap3_stalker_vpll2 = { | |
432 | .constraints = { | |
433 | .name = "VDVI", | |
434 | .min_uV = 1800000, | |
435 | .max_uV = 1800000, | |
436 | .apply_uV = true, | |
437 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
438 | | REGULATOR_MODE_STANDBY, | |
439 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
440 | | REGULATOR_CHANGE_STATUS, | |
441 | }, | |
c8aac01b SG |
442 | .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), |
443 | .consumer_supplies = omap3_stalker_vpll2_supplies, | |
9cbc3493 J |
444 | }; |
445 | ||
446 | static struct twl4030_platform_data omap3stalker_twldata = { | |
447 | .irq_base = TWL4030_IRQ_BASE, | |
448 | .irq_end = TWL4030_IRQ_END, | |
449 | ||
450 | /* platform_data for children goes here */ | |
451 | .keypad = &omap3stalker_kp_data, | |
452 | .madc = &omap3stalker_madc_data, | |
453 | .usb = &omap3stalker_usb_data, | |
454 | .gpio = &omap3stalker_gpio_data, | |
455 | .codec = &omap3stalker_codec_data, | |
456 | .vdac = &omap3_stalker_vdac, | |
457 | .vpll2 = &omap3_stalker_vpll2, | |
fbd8071c MR |
458 | .vmmc1 = &omap3stalker_vmmc1, |
459 | .vsim = &omap3stalker_vsim, | |
9cbc3493 J |
460 | }; |
461 | ||
462 | static struct at24_platform_data fram_info = { | |
463 | .byte_len = (64 * 1024) / 8, | |
464 | .page_size = 8192, | |
465 | .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO, | |
466 | }; | |
467 | ||
468 | static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { | |
469 | { | |
470 | I2C_BOARD_INFO("24c64", 0x50), | |
471 | .flags = I2C_CLIENT_WAKE, | |
472 | .platform_data = &fram_info, | |
473 | }, | |
474 | }; | |
475 | ||
476 | static int __init omap3_stalker_i2c_init(void) | |
477 | { | |
fbd8071c | 478 | omap3_pmic_init("twl4030", &omap3stalker_twldata); |
9cbc3493 J |
479 | omap_register_i2c_bus(2, 400, NULL, 0); |
480 | omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, | |
481 | ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); | |
482 | return 0; | |
483 | } | |
484 | ||
485 | #define OMAP3_STALKER_TS_GPIO 175 | |
9cbc3493 J |
486 | |
487 | static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { | |
488 | }; | |
489 | ||
3dc3bad6 | 490 | static void __init omap3_stalker_init_early(void) |
9cbc3493 | 491 | { |
4805734b PW |
492 | omap2_init_common_infrastructure(); |
493 | omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); | |
3dc3bad6 RKAL |
494 | } |
495 | ||
496 | static void __init omap3_stalker_init_irq(void) | |
497 | { | |
9cbc3493 J |
498 | omap_init_irq(); |
499 | #ifdef CONFIG_OMAP_32K_TIMER | |
500 | omap2_gp_clockevent_set_gptimer(12); | |
501 | #endif | |
9cbc3493 J |
502 | } |
503 | ||
504 | static struct platform_device *omap3_stalker_devices[] __initdata = { | |
9cbc3493 J |
505 | &keys_gpio, |
506 | }; | |
507 | ||
181b250c KM |
508 | static struct usbhs_omap_board_data usbhs_bdata __initconst = { |
509 | .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, | |
510 | .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, | |
511 | .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, | |
9cbc3493 J |
512 | |
513 | .phy_reset = true, | |
514 | .reset_gpio_port[0] = -EINVAL, | |
515 | .reset_gpio_port[1] = 21, | |
516 | .reset_gpio_port[2] = -EINVAL, | |
517 | }; | |
518 | ||
519 | #ifdef CONFIG_OMAP_MUX | |
520 | static struct omap_board_mux board_mux[] __initdata = { | |
521 | OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | | |
522 | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), | |
523 | OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | | |
524 | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), | |
525 | {.reg_offset = OMAP_MUX_TERMINATOR}, | |
526 | }; | |
9cbc3493 J |
527 | #endif |
528 | ||
529 | static struct omap_musb_board_data musb_board_data = { | |
530 | .interface_type = MUSB_INTERFACE_ULPI, | |
531 | .mode = MUSB_OTG, | |
532 | .power = 100, | |
533 | }; | |
534 | ||
535 | static void __init omap3_stalker_init(void) | |
536 | { | |
537 | omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); | |
e41cccfe TL |
538 | omap_board_config = omap3_stalker_config; |
539 | omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); | |
9cbc3493 J |
540 | |
541 | omap3_stalker_i2c_init(); | |
542 | ||
543 | platform_add_devices(omap3_stalker_devices, | |
544 | ARRAY_SIZE(omap3_stalker_devices)); | |
545 | ||
d5e13227 | 546 | omap_display_init(&omap3_stalker_dss_data); |
9cbc3493 J |
547 | |
548 | omap_serial_init(); | |
549 | usb_musb_init(&musb_board_data); | |
9e64bb1e | 550 | usbhs_init(&usbhs_bdata); |
96974a24 | 551 | omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); |
9cbc3493 J |
552 | |
553 | omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); | |
554 | omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); | |
555 | ||
556 | omap3stalker_init_eth(); | |
557 | omap3_stalker_display_init(); | |
558 | /* Ensure SDRC pins are mux'd for self-refresh */ | |
559 | omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); | |
560 | omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); | |
561 | } | |
562 | ||
9cbc3493 J |
563 | MACHINE_START(SBC3530, "OMAP3 STALKER") |
564 | /* Maintainer: Jason Lam -lzg@ema-tech.com */ | |
9cbc3493 | 565 | .boot_params = 0x80000100, |
869fef41 | 566 | .map_io = omap3_map_io, |
3dc3bad6 | 567 | .init_early = omap3_stalker_init_early, |
9cbc3493 J |
568 | .init_irq = omap3_stalker_init_irq, |
569 | .init_machine = omap3_stalker_init, | |
570 | .timer = &omap_timer, | |
571 | MACHINE_END |