[deliverable/linux.git] / arch / arm / mach-omap2 / board-omap3touchbook.c

/*
 * linux/arch/arm/mach-omap2/board-omap3touchbook.c
 *
 * Copyright (C) 2009 Always Innovating
 *
 * Modified from mach-omap2/board-omap3beagleboard.c
 *
 * Initial code: Grégoire Gentil, Tim Yamin
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>

#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/spi/spi.h>

#include <linux/spi/ads7846.h>

#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/system_info.h>

#include "common.h"
#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>

#include "mux.h"
#include "hsmmc.h"
#include "board-flash.h"
#include "common-board-devices.h"

#include <asm/setup.h>

#define OMAP3_AC_GPIO		136
#define OMAP3_TS_GPIO		162
#define TB_BL_PWM_TIMER		9
#define TB_KILL_POWER_GPIO	168

#define	NAND_CS			0

static unsigned long touchbook_revision;

static struct mtd_partition omap3touchbook_nand_partitions[] = {
	/* All the partition sizes are listed in terms of NAND block size */
	{
		.name		= "X-Loader",
		.offset		= 0,
		.size		= 4 * NAND_BLOCK_SIZE,
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "U-Boot",
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
		.size		= 15 * NAND_BLOCK_SIZE,
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "U-Boot Env",
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
		.size		= 1 * NAND_BLOCK_SIZE,
	},
	{
		.name		= "Kernel",
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
		.size		= 32 * NAND_BLOCK_SIZE,
	},
	{
		.name		= "File System",
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
		.size		= MTDPART_SIZ_FULL,
	},
};

#include "sdram-micron-mt46h32m32lf-6.h"

static struct omap2_hsmmc_info mmc[] = {
	{
		.mmc		= 1,
		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
		.gpio_wp	= 29,
		.deferred	= true,
	},
	{}	/* Terminator */
};

static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};

static struct regulator_consumer_supply touchbook_vsim_supply[] = {
	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};

static struct gpio_led gpio_leds[];

static int touchbook_twl_gpio_setup(struct device *dev,
		unsigned gpio, unsigned ngpio)
{
	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
	mmc[0].gpio_cd = gpio + 0;
	omap_hsmmc_late_init(mmc);

	/* REVISIT: need ehci-omap hooks for external VBUS
	 * power switch and overcurrent detect
	 */
	gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC");

	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
	gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
			 "nEN_USB_PWR");

	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;

	return 0;
}

static struct twl4030_gpio_platform_data touchbook_gpio_data = {
	.use_leds	= true,
	.pullups	= BIT(1),
	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
				| BIT(15) | BIT(16) | BIT(17),
	.setup		= touchbook_twl_gpio_setup,
};

static struct regulator_consumer_supply touchbook_vdac_supply[] = {
{
	.supply		= "vdac",
},
};

static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
{
	.supply		= "vdvi",
},
};

/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data touchbook_vmmc1 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 3150000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vmmc1_supply),
	.consumer_supplies	= touchbook_vmmc1_supply,
};

/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
static struct regulator_init_data touchbook_vsim = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 3000000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vsim_supply),
	.consumer_supplies	= touchbook_vsim_supply,
};

static struct twl4030_platform_data touchbook_twldata = {
	/* platform_data for children goes here */
	.gpio		= &touchbook_gpio_data,
	.vmmc1		= &touchbook_vmmc1,
	.vsim		= &touchbook_vsim,
};

static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
	{
		I2C_BOARD_INFO("bq27200", 0x55),
	},
};

static int __init omap3_touchbook_i2c_init(void)
{
	/* Standard TouchBook bus */
	omap3_pmic_get_config(&touchbook_twldata,
			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);

	touchbook_twldata.vdac->num_consumer_supplies =
					ARRAY_SIZE(touchbook_vdac_supply);
	touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;

	touchbook_twldata.vpll2->constraints.name = "VDVI";
	touchbook_twldata.vpll2->num_consumer_supplies =
					ARRAY_SIZE(touchbook_vdvi_supply);
	touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;

	omap3_pmic_init("twl4030", &touchbook_twldata);
	/* Additional TouchBook bus */
	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
			ARRAY_SIZE(touchBook_i2c_boardinfo));

	return 0;
}

static struct ads7846_platform_data ads7846_pdata = {
	.x_min			= 100,
	.y_min			= 265,
	.x_max			= 3950,
	.y_max			= 3750,
	.x_plate_ohms		= 40,
	.pressure_max		= 255,
	.debounce_max		= 10,
	.debounce_tol		= 5,
	.debounce_rep		= 1,
	.gpio_pendown		= OMAP3_TS_GPIO,
	.keep_vref_on		= 1,
};

static struct gpio_led gpio_leds[] = {
	{
		.name			= "touchbook::usr0",
		.default_trigger	= "heartbeat",
		.gpio			= 150,
	},
	{
		.name			= "touchbook::usr1",
		.default_trigger	= "mmc0",
		.gpio			= 149,
	},
	{
		.name			= "touchbook::pmu_stat",
		.gpio			= -EINVAL,	/* gets replaced */
		.active_low		= true,
	},
};

static struct gpio_led_platform_data gpio_led_info = {
	.leds		= gpio_leds,
	.num_leds	= ARRAY_SIZE(gpio_leds),
};

static struct platform_device leds_gpio = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_led_info,
	},
};

static struct gpio_keys_button gpio_buttons[] = {
	{
		.code			= BTN_EXTRA,
		.gpio			= 7,
		.desc			= "user",
		.wakeup			= 1,
	},
	{
		.code			= KEY_POWER,
		.gpio			= 183,
		.desc			= "power",
		.wakeup			= 1,
	},
};

static struct gpio_keys_platform_data gpio_key_info = {
	.buttons	= gpio_buttons,
	.nbuttons	= ARRAY_SIZE(gpio_buttons),
};

static struct platform_device keys_gpio = {
	.name	= "gpio-keys",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_key_info,
	},
};

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif

static struct platform_device *omap3_touchbook_devices[] __initdata = {
	&leds_gpio,
	&keys_gpio,
};

static const struct usbhs_omap_board_data usbhs_bdata __initconst = {

	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

	.phy_reset  = true,
	.reset_gpio_port[0]  = -EINVAL,
	.reset_gpio_port[1]  = 147,
	.reset_gpio_port[2]  = -EINVAL
};

static void omap3_touchbook_poweroff(void)
{
	int pwr_off = TB_KILL_POWER_GPIO;

	if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0)
		printk(KERN_ERR "Unable to get kill power GPIO\n");
}

static int __init early_touchbook_revision(char *p)
{
	if (!p)
		return 0;

	return strict_strtoul(p, 10, &touchbook_revision);
}
early_param("tbr", early_touchbook_revision);

static void __init omap3_touchbook_init(void)
{
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);

	pm_power_off = omap3_touchbook_poweroff;

	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
		mmc[0].gpio_wp = 23;
	} else {
		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
	}
	omap_hsmmc_init(mmc);

	omap3_touchbook_i2c_init();
	platform_add_devices(omap3_touchbook_devices,
			ARRAY_SIZE(omap3_touchbook_devices));
	omap_serial_init();
	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
				  mt46h32m32lf6_sdrc_params);

	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
	/* REVISIT leave DVI powered down until it's needed ... */
	gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");

	/* Touchscreen and accelerometer */
	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
	usb_musb_init(NULL);
	usbhs_init(&usbhs_bdata);
	board_nand_init(omap3touchbook_nand_partitions,
			ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
			NAND_BUSWIDTH_16, NULL);

	/* Ensure SDRC pins are mux'd for self-refresh */
	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}

MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
	.atag_offset	= 0x100,
	.reserve	= omap_reserve,
	.map_io		= omap3_map_io,
	.init_early	= omap3430_init_early,
	.init_irq	= omap3_init_irq,
	.handle_irq	= omap3_intc_handle_irq,
	.init_machine	= omap3_touchbook_init,
	.init_late	= omap3430_init_late,
	.timer		= &omap3_secure_timer,
	.restart	= omap3xxx_restart,
MACHINE_END
Commit	Line	Data
7a079cab GG	1	/*
	2	* linux/arch/arm/mach-omap2/board-omap3touchbook.c
	3	*
	4	* Copyright (C) 2009 Always Innovating
	5	*
	6	* Modified from mach-omap2/board-omap3beagleboard.c
	7	*
	8	* Initial code: Grégoire Gentil, Tim Yamin
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License version 2 as
	12	* published by the Free Software Foundation.
	13	*/
	14
	15	#include <linux/kernel.h>
	16	#include <linux/init.h>
	17	#include <linux/platform_device.h>
	18	#include <linux/delay.h>
	19	#include <linux/err.h>
	20	#include <linux/clk.h>
	21	#include <linux/io.h>
	22	#include <linux/leds.h>
	23	#include <linux/gpio.h>
	24	#include <linux/input.h>
	25	#include <linux/gpio_keys.h>
	26
	27	#include <linux/mtd/mtd.h>
	28	#include <linux/mtd/partitions.h>
	29	#include <linux/mtd/nand.h>
3a63833e	30	#include <linux/mmc/host.h>
7a079cab	31
2203747c	32	#include <linux/platform_data/spi-omap2-mcspi.h>
7a079cab GG	33	#include <linux/spi/spi.h>
	34
	35	#include <linux/spi/ads7846.h>
	36
	37	#include <linux/regulator/machine.h>
ebeb53e1	38	#include <linux/i2c/twl.h>
7a079cab	39
7a079cab GG	40	#include <asm/mach-types.h>
	41	#include <asm/mach/arch.h>
	42	#include <asm/mach/map.h>
	43	#include <asm/mach/flash.h>
9f97da78	44	#include <asm/system_info.h>
7a079cab	45
4e65331c	46	#include "common.h"
3ef5d007	47	#include "gpmc.h"
2203747c	48	#include <linux/platform_data/mtd-nand-omap2.h>
7a079cab GG	49
7a079cab GG	50	#include "mux.h"
d02a900b	51	#include "hsmmc.h"
2e618261	52	#include "board-flash.h"
96974a24	53	#include "common-board-devices.h"
7a079cab GG	54
	55	#include <asm/setup.h>
	56
7a079cab GG	57	#define OMAP3_AC_GPIO 136
	58	#define OMAP3_TS_GPIO 162
	59	#define TB_BL_PWM_TIMER 9
	60	#define TB_KILL_POWER_GPIO 168
	61
2e618261 AM	62	#define NAND_CS 0
2e618261 AM	63
38815733	64	static unsigned long touchbook_revision;
7a079cab GG	65
	66	static struct mtd_partition omap3touchbook_nand_partitions[] = {
	67	/* All the partition sizes are listed in terms of NAND block size */
	68	{
	69	.name = "X-Loader",
	70	.offset = 0,
	71	.size = 4 * NAND_BLOCK_SIZE,
	72	.mask_flags = MTD_WRITEABLE, /* force read-only */
	73	},
	74	{
	75	.name = "U-Boot",
	76	.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
	77	.size = 15 * NAND_BLOCK_SIZE,
	78	.mask_flags = MTD_WRITEABLE, /* force read-only */
	79	},
	80	{
	81	.name = "U-Boot Env",
	82	.offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
	83	.size = 1 * NAND_BLOCK_SIZE,
	84	},
	85	{
	86	.name = "Kernel",
	87	.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
	88	.size = 32 * NAND_BLOCK_SIZE,
	89	},
	90	{
	91	.name = "File System",
	92	.offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
	93	.size = MTDPART_SIZ_FULL,
	94	},
	95	};
	96
7a079cab GG	97	#include "sdram-micron-mt46h32m32lf-6.h"
7a079cab GG	98
68ff0423	99	static struct omap2_hsmmc_info mmc[] = {
7a079cab GG	100	{
7a079cab GG	101	.mmc = 1,
3a63833e	102	.caps = MMC_CAP_4_BIT_DATA \| MMC_CAP_8_BIT_DATA,
7a079cab	103	.gpio_wp = 29,
3b972bf0	104	.deferred = true,
7a079cab GG	105	},
	106	{} /* Terminator */
	107	};
	108
786b01a8 OD	109	static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
786b01a8 OD	110	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
7a079cab GG	111	};
7a079cab GG	112
786b01a8 OD	113	static struct regulator_consumer_supply touchbook_vsim_supply[] = {
786b01a8 OD	114	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
7a079cab GG	115	};
	116
	117	static struct gpio_led gpio_leds[];
	118
	119	static int touchbook_twl_gpio_setup(struct device *dev,
	120	unsigned gpio, unsigned ngpio)
	121	{
7a079cab GG	122	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
7a079cab GG	123	mmc[0].gpio_cd = gpio + 0;
3b972bf0	124	omap_hsmmc_late_init(mmc);
7a079cab	125
7a079cab GG	126	/* REVISIT: need ehci-omap hooks for external VBUS
	127	* power switch and overcurrent detect
	128	*/
bc593f5d	129	gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC");
7a079cab GG	130
7a079cab GG	131	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
bc593f5d IG	132	gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
bc593f5d IG	133	"nEN_USB_PWR");
7a079cab GG	134
	135	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
	136	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
	137
	138	return 0;
	139	}
	140
	141	static struct twl4030_gpio_platform_data touchbook_gpio_data = {
7a079cab GG	142	.use_leds = true,
	143	.pullups = BIT(1),
	144	.pulldowns = BIT(2) \| BIT(6) \| BIT(7) \| BIT(8) \| BIT(13)
	145	\| BIT(15) \| BIT(16) \| BIT(17),
	146	.setup = touchbook_twl_gpio_setup,
	147	};
	148
786b01a8 OD	149	static struct regulator_consumer_supply touchbook_vdac_supply[] = {
786b01a8 OD	150	{
7a079cab	151	.supply = "vdac",
786b01a8	152	},
7a079cab GG	153	};
7a079cab GG	154
786b01a8 OD	155	static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
786b01a8 OD	156	{
7a079cab	157	.supply = "vdvi",
786b01a8	158	},
7a079cab GG	159	};
	160
	161	/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
	162	static struct regulator_init_data touchbook_vmmc1 = {
	163	.constraints = {
	164	.min_uV = 1850000,
	165	.max_uV = 3150000,
	166	.valid_modes_mask = REGULATOR_MODE_NORMAL
	167	\| REGULATOR_MODE_STANDBY,
	168	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
	169	\| REGULATOR_CHANGE_MODE
	170	\| REGULATOR_CHANGE_STATUS,
	171	},
786b01a8 OD	172	.num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply),
786b01a8 OD	173	.consumer_supplies = touchbook_vmmc1_supply,
7a079cab GG	174	};
	175
	176	/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
	177	static struct regulator_init_data touchbook_vsim = {
	178	.constraints = {
	179	.min_uV = 1800000,
	180	.max_uV = 3000000,
	181	.valid_modes_mask = REGULATOR_MODE_NORMAL
	182	\| REGULATOR_MODE_STANDBY,
	183	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
	184	\| REGULATOR_CHANGE_MODE
	185	\| REGULATOR_CHANGE_STATUS,
	186	},
786b01a8 OD	187	.num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply),
786b01a8 OD	188	.consumer_supplies = touchbook_vsim_supply,
7a079cab GG	189	};
7a079cab GG	190
7a079cab	191	static struct twl4030_platform_data touchbook_twldata = {
7a079cab	192	/* platform_data for children goes here */
7a079cab	193	.gpio = &touchbook_gpio_data,
7a079cab GG	194	.vmmc1 = &touchbook_vmmc1,
7a079cab GG	195	.vsim = &touchbook_vsim,
7a079cab GG	196	};
7a079cab GG	197
7a079cab GG	198	static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
	199	{
	200	I2C_BOARD_INFO("bq27200", 0x55),
	201	},
	202	};
	203
	204	static int __init omap3_touchbook_i2c_init(void)
	205	{
	206	/* Standard TouchBook bus */
827ed9ae	207	omap3_pmic_get_config(&touchbook_twldata,
b252b0ef PU	208	TWL_COMMON_PDATA_USB \| TWL_COMMON_PDATA_AUDIO,
	209	TWL_COMMON_REGULATOR_VDAC \| TWL_COMMON_REGULATOR_VPLL2);
	210
	211	touchbook_twldata.vdac->num_consumer_supplies =
	212	ARRAY_SIZE(touchbook_vdac_supply);
	213	touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
	214
	215	touchbook_twldata.vpll2->constraints.name = "VDVI";
	216	touchbook_twldata.vpll2->num_consumer_supplies =
	217	ARRAY_SIZE(touchbook_vdvi_supply);
	218	touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
	219
fbd8071c	220	omap3_pmic_init("twl4030", &touchbook_twldata);
7a079cab GG	221	/* Additional TouchBook bus */
	222	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
	223	ARRAY_SIZE(touchBook_i2c_boardinfo));
	224
	225	return 0;
	226	}
	227
96974a24	228	static struct ads7846_platform_data ads7846_pdata = {
7a079cab GG	229	.x_min = 100,
	230	.y_min = 265,
	231	.x_max = 3950,
	232	.y_max = 3750,
	233	.x_plate_ohms = 40,
	234	.pressure_max = 255,
	235	.debounce_max = 10,
	236	.debounce_tol = 5,
	237	.debounce_rep = 1,
	238	.gpio_pendown = OMAP3_TS_GPIO,
	239	.keep_vref_on = 1,
	240	};
	241
7a079cab GG	242	static struct gpio_led gpio_leds[] = {
	243	{
	244	.name = "touchbook::usr0",
	245	.default_trigger = "heartbeat",
	246	.gpio = 150,
	247	},
	248	{
	249	.name = "touchbook::usr1",
	250	.default_trigger = "mmc0",
	251	.gpio = 149,
	252	},
	253	{
	254	.name = "touchbook::pmu_stat",
	255	.gpio = -EINVAL, /* gets replaced */
	256	.active_low = true,
	257	},
	258	};
	259
	260	static struct gpio_led_platform_data gpio_led_info = {
	261	.leds = gpio_leds,
	262	.num_leds = ARRAY_SIZE(gpio_leds),
	263	};
	264
	265	static struct platform_device leds_gpio = {
	266	.name = "leds-gpio",
	267	.id = -1,
	268	.dev = {
	269	.platform_data = &gpio_led_info,
	270	},
	271	};
	272
	273	static struct gpio_keys_button gpio_buttons[] = {
	274	{
	275	.code = BTN_EXTRA,
	276	.gpio = 7,
	277	.desc = "user",
	278	.wakeup = 1,
	279	},
	280	{
	281	.code = KEY_POWER,
	282	.gpio = 183,
	283	.desc = "power",
	284	.wakeup = 1,
	285	},
	286	};
	287
	288	static struct gpio_keys_platform_data gpio_key_info = {
	289	.buttons = gpio_buttons,
	290	.nbuttons = ARRAY_SIZE(gpio_buttons),
	291	};
	292
	293	static struct platform_device keys_gpio = {
	294	.name = "gpio-keys",
	295	.id = -1,
	296	.dev = {
	297	.platform_data = &gpio_key_info,
	298	},
	299	};
	300
7a079cab GG	301	#ifdef CONFIG_OMAP_MUX
	302	static struct omap_board_mux board_mux[] __initdata = {
	303	{ .reg_offset = OMAP_MUX_TERMINATOR },
	304	};
7a079cab GG	305	#endif
7a079cab GG	306
7a079cab	307	static struct platform_device *omap3_touchbook_devices[] __initdata = {
7a079cab GG	308	&leds_gpio,
	309	&keys_gpio,
	310	};
	311
181b250c	312	static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
7a079cab	313
181b250c KM	314	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	315	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	316	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
7a079cab GG	317
	318	.phy_reset = true,
	319	.reset_gpio_port[0] = -EINVAL,
	320	.reset_gpio_port[1] = 147,
	321	.reset_gpio_port[2] = -EINVAL
	322	};
	323
	324	static void omap3_touchbook_poweroff(void)
	325	{
bc593f5d	326	int pwr_off = TB_KILL_POWER_GPIO;
7a079cab	327
bc593f5d	328	if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0)
7a079cab	329	printk(KERN_ERR "Unable to get kill power GPIO\n");
7a079cab GG	330	}
7a079cab GG	331
d2197e1e	332	static int __init early_touchbook_revision(char *p)
7a079cab	333	{
d2197e1e TL	334	if (!p)
d2197e1e TL	335	return 0;
7a079cab	336
d2197e1e	337	return strict_strtoul(p, 10, &touchbook_revision);
7a079cab	338	}
d2197e1e	339	early_param("tbr", early_touchbook_revision);
7a079cab GG	340
	341	static void __init omap3_touchbook_init(void)
	342	{
e0530460	343	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
e41cccfe	344
7a079cab GG	345	pm_power_off = omap3_touchbook_poweroff;
7a079cab GG	346
d1589f09 TL	347	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
	348	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
	349	mmc[0].gpio_wp = 23;
	350	} else {
	351	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
	352	}
3b972bf0	353	omap_hsmmc_init(mmc);
d1589f09	354
7a079cab GG	355	omap3_touchbook_i2c_init();
	356	platform_add_devices(omap3_touchbook_devices,
	357	ARRAY_SIZE(omap3_touchbook_devices));
	358	omap_serial_init();
a4ca9dbe TL	359	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
a4ca9dbe TL	360	mt46h32m32lf6_sdrc_params);
7a079cab GG	361
7a079cab GG	362	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
7a079cab	363	/* REVISIT leave DVI powered down until it's needed ... */
bc593f5d	364	gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
7a079cab GG	365
7a079cab GG	366	/* Touchscreen and accelerometer */
96974a24	367	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
9e18630b	368	usb_musb_init(NULL);
9e64bb1e	369	usbhs_init(&usbhs_bdata);
2e618261 AM	370	board_nand_init(omap3touchbook_nand_partitions,
	371	ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
	372	NAND_BUSWIDTH_16, NULL);
7a079cab GG	373
	374	/* Ensure SDRC pins are mux'd for self-refresh */
	375	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
	376	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
	377	}
	378
7a079cab GG	379	MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
7a079cab GG	380	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
5e52b435	381	.atag_offset = 0x100,
71ee7dad	382	.reserve = omap_reserve,
3dc3bad6	383	.map_io = omap3_map_io,
8f5b5a41	384	.init_early = omap3430_init_early,
be732460	385	.init_irq = omap3_init_irq,
6b2f55d7	386	.handle_irq = omap3_intc_handle_irq,
7a079cab	387	.init_machine = omap3_touchbook_init,
bbd707ac	388	.init_late = omap3430_init_late,
e74984e4	389	.timer = &omap3_secure_timer,
187e3e06	390	.restart = omap3xxx_restart,
7a079cab	391	MACHINE_END