[deliverable/linux.git] / arch / arm / mach-omap2 / board-overo.c

/*
 * board-overo.c (Gumstix Overo)
 *
 * Initial code: Steve Sakoman <steve@sakoman.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/spi/spi.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>

#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/spi-omap2-mcspi.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>

#include <video/omapdss.h>
#include <video/omap-panel-data.h>

#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "gpmc.h"
#include "hsmmc.h"
#include "board-flash.h"
#include "common-board-devices.h"

#define	NAND_CS			0

#define OVERO_GPIO_BT_XGATE	15
#define OVERO_GPIO_W2W_NRESET	16
#define OVERO_GPIO_PENDOWN	114
#define OVERO_GPIO_BT_NRESET	164
#define OVERO_GPIO_USBH_CPEN	168
#define OVERO_GPIO_USBH_NRESET	183

#define OVERO_SMSC911X_CS      5
#define OVERO_SMSC911X_GPIO    176
#define OVERO_SMSC911X_NRESET  64
#define OVERO_SMSC911X2_CS     4
#define OVERO_SMSC911X2_GPIO   65

/* whether to register LCD35 instead of LCD43 */
static bool overo_use_lcd35;

#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)

/* fixed regulator for ads7846 */
static struct regulator_consumer_supply ads7846_supply[] = {
	REGULATOR_SUPPLY("vcc", "spi1.0"),
};

static struct regulator_init_data vads7846_regulator = {
	.constraints = {
		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
	.consumer_supplies	= ads7846_supply,
};

static struct fixed_voltage_config vads7846 = {
	.supply_name		= "vads7846",
	.microvolts		= 3300000, /* 3.3V */
	.gpio			= -EINVAL,
	.startup_delay		= 0,
	.init_data		= &vads7846_regulator,
};

static struct platform_device vads7846_device = {
	.name		= "reg-fixed-voltage",
	.id		= 1,
	.dev = {
		.platform_data = &vads7846,
	},
};

static void __init overo_ads7846_init(void)
{
	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
	platform_device_register(&vads7846_device);
}

#else
static inline void __init overo_ads7846_init(void) { return; }
#endif

#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)

#include <linux/smsc911x.h>
#include "gpmc-smsc911x.h"

static struct omap_smsc911x_platform_data smsc911x_cfg = {
	.id		= 0,
	.cs             = OVERO_SMSC911X_CS,
	.gpio_irq       = OVERO_SMSC911X_GPIO,
	.gpio_reset     = OVERO_SMSC911X_NRESET,
	.flags		= SMSC911X_USE_32BIT,
};

static struct omap_smsc911x_platform_data smsc911x2_cfg = {
	.id		= 1,
	.cs             = OVERO_SMSC911X2_CS,
	.gpio_irq       = OVERO_SMSC911X2_GPIO,
	.gpio_reset     = -EINVAL,
	.flags		= SMSC911X_USE_32BIT,
};

static void __init overo_init_smsc911x(void)
{
	gpmc_smsc911x_init(&smsc911x_cfg);
	gpmc_smsc911x_init(&smsc911x2_cfg);
}

#else
static inline void __init overo_init_smsc911x(void) { return; }
#endif

/* DSS */
#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145

static struct connector_atv_platform_data overo_tv_pdata = {
	.name = "tv",
	.source = "venc.0",
	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
	.invert_polarity = false,
};

static struct platform_device overo_tv_connector_device = {
	.name                   = "connector-analog-tv",
	.id                     = 0,
	.dev.platform_data      = &overo_tv_pdata,
};

static const struct display_timing overo_lcd43_videomode = {
	.pixelclock	= { 0, 9200000, 0 },

	.hactive = { 0, 480, 0 },
	.hfront_porch = { 0, 8, 0 },
	.hback_porch = { 0, 4, 0 },
	.hsync_len = { 0, 41, 0 },

	.vactive = { 0, 272, 0 },
	.vfront_porch = { 0, 4, 0 },
	.vback_porch = { 0, 2, 0 },
	.vsync_len = { 0, 10, 0 },

	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};

static struct panel_dpi_platform_data overo_lcd43_pdata = {
	.name                   = "lcd43",
	.source                 = "dpi.0",

	.data_lines		= 24,

	.display_timing		= &overo_lcd43_videomode,

	.enable_gpio		= OVERO_GPIO_LCD_EN,
	.backlight_gpio		= OVERO_GPIO_LCD_BL,
};

static struct platform_device overo_lcd43_device = {
	.name                   = "panel-dpi",
	.id                     = 0,
	.dev.platform_data      = &overo_lcd43_pdata,
};

static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
	.name                   = "dvi",
	.source                 = "tfp410.0",
	.i2c_bus_num            = 3,
};

static struct platform_device overo_dvi_connector_device = {
	.name                   = "connector-dvi",
	.id                     = 0,
	.dev.platform_data      = &overo_dvi_connector_pdata,
};

static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
	.name                   = "tfp410.0",
	.source                 = "dpi.0",
	.data_lines             = 24,
	.power_down_gpio        = -1,
};

static struct platform_device overo_tfp410_device = {
	.name                   = "tfp410",
	.id                     = 0,
	.dev.platform_data      = &overo_tfp410_pdata,
};

static struct omap_dss_board_info overo_dss_data = {
	.default_display_name = "lcd43",
};

static void __init overo_display_init(void)
{
	omap_display_init(&overo_dss_data);

	if (!overo_use_lcd35)
		platform_device_register(&overo_lcd43_device);
	platform_device_register(&overo_tfp410_device);
	platform_device_register(&overo_dvi_connector_device);
	platform_device_register(&overo_tv_connector_device);
}

static struct mtd_partition overo_nand_partitions[] = {
	{
		.name           = "xloader",
		.offset         = 0,			/* Offset = 0x00000 */
		.size           = 4 * NAND_BLOCK_SIZE,
		.mask_flags     = MTD_WRITEABLE
	},
	{
		.name           = "uboot",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
		.size           = 14 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "uboot environment",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
		.size           = 2 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "linux",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
		.size           = 32 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "rootfs",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
		.size           = MTDPART_SIZ_FULL,
	},
};

static struct omap2_hsmmc_info mmc[] = {
	{
		.mmc		= 1,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= -EINVAL,
	},
	{
		.mmc		= 2,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= -EINVAL,
		.transceiver	= true,
		.ocr_mask	= 0x00100000,	/* 3.3V */
	},
	{}	/* Terminator */
};

static struct regulator_consumer_supply overo_vmmc1_supply[] = {
	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};

#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
#include <linux/leds.h>

static struct gpio_led gpio_leds[] = {
	{
		.name			= "overo:red:gpio21",
		.default_trigger	= "heartbeat",
		.gpio			= 21,
		.active_low		= true,
	},
	{
		.name			= "overo:blue:gpio22",
		.default_trigger	= "none",
		.gpio			= 22,
		.active_low		= true,
	},
	{
		.name			= "overo:blue:COM",
		.default_trigger	= "mmc0",
		.gpio			= -EINVAL,	/* gets replaced */
		.active_low		= true,
	},
};

static struct gpio_led_platform_data gpio_leds_pdata = {
	.leds		= gpio_leds,
	.num_leds	= ARRAY_SIZE(gpio_leds),
};

static struct platform_device gpio_leds_device = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_leds_pdata,
	},
};

static void __init overo_init_led(void)
{
	platform_device_register(&gpio_leds_device);
}

#else
static inline void __init overo_init_led(void) { return; }
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>

static struct gpio_keys_button gpio_buttons[] = {
	{
		.code			= BTN_0,
		.gpio			= 23,
		.desc			= "button0",
		.wakeup			= 1,
	},
	{
		.code			= BTN_1,
		.gpio			= 14,
		.desc			= "button1",
		.wakeup			= 1,
	},
};

static struct gpio_keys_platform_data gpio_keys_pdata = {
	.buttons	= gpio_buttons,
	.nbuttons	= ARRAY_SIZE(gpio_buttons),
};

static struct platform_device gpio_keys_device = {
	.name	= "gpio-keys",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_keys_pdata,
	},
};

static void __init overo_init_keys(void)
{
	platform_device_register(&gpio_keys_device);
}

#else
static inline void __init overo_init_keys(void) { return; }
#endif

static int overo_twl_gpio_setup(struct device *dev,
		unsigned gpio, unsigned ngpio)
{
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
#endif

	return 0;
}

static struct twl4030_gpio_platform_data overo_gpio_data = {
	.use_leds	= true,
	.setup		= overo_twl_gpio_setup,
};

static struct regulator_init_data overo_vmmc1 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 3150000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
	.consumer_supplies	= overo_vmmc1_supply,
};

static struct twl4030_platform_data overo_twldata = {
	.gpio		= &overo_gpio_data,
	.vmmc1		= &overo_vmmc1,
};

static int __init overo_i2c_init(void)
{
	omap3_pmic_get_config(&overo_twldata,
			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);

	overo_twldata.vpll2->constraints.name = "VDVI";

	omap3_pmic_init("tps65950", &overo_twldata);
	/* i2c2 pins are used for gpio */
	omap_register_i2c_bus(3, 400, NULL, 0);
	return 0;
}

static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
	.name                   = "lcd35",
	.source                 = "dpi.0",

	.data_lines		= 24,

	.enable_gpio		= OVERO_GPIO_LCD_EN,
	.backlight_gpio		= OVERO_GPIO_LCD_BL,
};

/*
 * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
 * selection is done based on the overo_use_lcd35 field. If new SPI
 * devices are added here, extra work is needed to make only the lgphilips panel
 * affected by the overo_use_lcd35 field.
 */
static struct spi_board_info overo_spi_board_info[] __initdata = {
	{
		.modalias		= "panel_lgphilips_lb035q02",
		.bus_num		= 1,
		.chip_select		= 1,
		.max_speed_hz		= 500000,
		.mode			= SPI_MODE_3,
		.platform_data		= &overo_lcd35_pdata,
	},
};

static int __init overo_spi_init(void)
{
	overo_ads7846_init();

	if (overo_use_lcd35) {
		spi_register_board_info(overo_spi_board_info,
				ARRAY_SIZE(overo_spi_board_info));
	}
	return 0;
}

static struct usbhs_phy_data phy_data[] __initdata = {
	{
		.port = 2,
		.reset_gpio = OVERO_GPIO_USBH_NRESET,
		.vcc_gpio = -EINVAL,
	},
};

static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
};

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif

static struct gpio overo_bt_gpios[] __initdata = {
	{ OVERO_GPIO_BT_XGATE,	GPIOF_OUT_INIT_LOW,	"lcd enable"    },
	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
};

static struct regulator_consumer_supply dummy_supplies[] = {
	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
};

static void __init overo_init(void)
{
	int ret;

	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
		overo_use_lcd35 = true;

	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	overo_i2c_init();
	omap_hsmmc_init(mmc);
	omap_serial_init();
	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
				  mt46h32m32lf6_sdrc_params);
	board_nand_init(overo_nand_partitions,
			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
	usb_musb_init(NULL);

	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
	usbhs_init(&usbhs_bdata);
	overo_spi_init();
	overo_init_smsc911x();
	overo_init_led();
	overo_init_keys();
	omap_twl4030_audio_init("overo", NULL);

	overo_display_init();

	/* Ensure SDRC pins are mux'd for self-refresh */
	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
			       "OVERO_GPIO_W2W_NRESET");
	if (ret == 0) {
		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
		udelay(10);
		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
	} else {
		pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
	}

	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
	if (ret) {
		pr_err("%s: could not obtain BT gpios\n", __func__);
	} else {
		gpio_export(OVERO_GPIO_BT_XGATE, 0);
		gpio_export(OVERO_GPIO_BT_NRESET, 0);
		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
		mdelay(6);
		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
	}

	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
			       "OVERO_GPIO_USBH_CPEN");
	if (ret == 0)
		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
	else
		pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
}

MACHINE_START(OVERO, "Gumstix Overo")
	.atag_offset	= 0x100,
	.reserve	= omap_reserve,
	.map_io		= omap3_map_io,
	.init_early	= omap35xx_init_early,
	.init_irq	= omap3_init_irq,
	.handle_irq	= omap3_intc_handle_irq,
	.init_machine	= overo_init,
	.init_late	= omap35xx_init_late,
	.init_time	= omap3_sync32k_timer_init,
	.restart	= omap3xxx_restart,
MACHINE_END
Commit	Line	Data
eba2645a SS	1	/*
	2	* board-overo.c (Gumstix Overo)
	3	*
	4	* Initial code: Steve Sakoman <steve@sakoman.com>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License
	8	* version 2 as published by the Free Software Foundation.
	9	*
	10	* This program is distributed in the hope that it will be useful, but
	11	* WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	13	* General Public License for more details.
	14	*
	15	* You should have received a copy of the GNU General Public License
	16	* along with this program; if not, write to the Free Software
	17	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
	18	* 02110-1301 USA
	19	*
	20	*/
	21
	22	#include <linux/clk.h>
	23	#include <linux/delay.h>
	24	#include <linux/err.h>
	25	#include <linux/init.h>
	26	#include <linux/io.h>
f9fa1bb9	27	#include <linux/gpio.h>
eba2645a SS	28	#include <linux/kernel.h>
eba2645a SS	29	#include <linux/platform_device.h>
b07682b6	30	#include <linux/i2c/twl.h>
bb3b9d8e	31	#include <linux/regulator/machine.h>
ca0a6a64	32	#include <linux/regulator/fixed.h>
7b12d7b6	33	#include <linux/spi/spi.h>
eba2645a SS	34
	35	#include <linux/mtd/mtd.h>
	36	#include <linux/mtd/nand.h>
	37	#include <linux/mtd/partitions.h>
3a63833e	38	#include <linux/mmc/host.h>
51482be9	39	#include <linux/usb/phy.h>
eba2645a	40
2203747c AB	41	#include <linux/platform_data/mtd-nand-omap2.h>
	42	#include <linux/platform_data/spi-omap2-mcspi.h>
	43
eba2645a SS	44	#include <asm/mach-types.h>
	45	#include <asm/mach/arch.h>
	46	#include <asm/mach/flash.h>
	47	#include <asm/mach/map.h>
	48
a0b38cc4	49	#include <video/omapdss.h>
a0d8dde9	50	#include <video/omap-panel-data.h>
eba2645a	51
6d02643d	52	#include "common.h"
ca5742bd	53	#include "mux.h"
2e12bd7e	54	#include "sdram-micron-mt46h32m32lf-6.h"
6d02643d	55	#include "gpmc.h"
d02a900b	56	#include "hsmmc.h"
2e618261	57	#include "board-flash.h"
96974a24	58	#include "common-board-devices.h"
90c62bf0	59
2e618261 AM	60	#define NAND_CS 0
2e618261 AM	61
0d4d9ab0 TL	62	#define OVERO_GPIO_BT_XGATE 15
0d4d9ab0 TL	63	#define OVERO_GPIO_W2W_NRESET 16
6fd210a9	64	#define OVERO_GPIO_PENDOWN 114
0d4d9ab0 TL	65	#define OVERO_GPIO_BT_NRESET 164
	66	#define OVERO_GPIO_USBH_CPEN 168
	67	#define OVERO_GPIO_USBH_NRESET 183
	68
172ef275 SS	69	#define OVERO_SMSC911X_CS 5
172ef275 SS	70	#define OVERO_SMSC911X_GPIO 176
863c9638	71	#define OVERO_SMSC911X_NRESET 64
5c9a29ed SS	72	#define OVERO_SMSC911X2_CS 4
5c9a29ed SS	73	#define OVERO_SMSC911X2_GPIO 65
172ef275	74
45a279c5 TV	75	/* whether to register LCD35 instead of LCD43 */
	76	static bool overo_use_lcd35;
	77
c6a81316 SS	78	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \|\| \
	79	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	80
ca0a6a64	81	/* fixed regulator for ads7846 */
786b01a8 OD	82	static struct regulator_consumer_supply ads7846_supply[] = {
	83	REGULATOR_SUPPLY("vcc", "spi1.0"),
	84	};
ca0a6a64 SS	85
	86	static struct regulator_init_data vads7846_regulator = {
	87	.constraints = {
	88	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	89	},
786b01a8 OD	90	.num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
786b01a8 OD	91	.consumer_supplies = ads7846_supply,
ca0a6a64 SS	92	};
	93
	94	static struct fixed_voltage_config vads7846 = {
	95	.supply_name = "vads7846",
	96	.microvolts = 3300000, /* 3.3V */
	97	.gpio = -EINVAL,
	98	.startup_delay = 0,
	99	.init_data = &vads7846_regulator,
	100	};
	101
	102	static struct platform_device vads7846_device = {
	103	.name = "reg-fixed-voltage",
	104	.id = 1,
	105	.dev = {
	106	.platform_data = &vads7846,
	107	},
c6a81316 SS	108	};
	109
	110	static void __init overo_ads7846_init(void)
	111	{
96974a24	112	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
ca0a6a64	113	platform_device_register(&vads7846_device);
c6a81316 SS	114	}
	115
	116	#else
	117	static inline void __init overo_ads7846_init(void) { return; }
	118	#endif
	119
172ef275 SS	120	#if defined(CONFIG_SMSC911X) \|\| defined(CONFIG_SMSC911X_MODULE)
	121
	122	#include <linux/smsc911x.h>
ac839b3c	123	#include "gpmc-smsc911x.h"
172ef275	124
21b42731	125	static struct omap_smsc911x_platform_data smsc911x_cfg = {
5c9a29ed	126	.id = 0,
21b42731 MR	127	.cs = OVERO_SMSC911X_CS,
21b42731 MR	128	.gpio_irq = OVERO_SMSC911X_GPIO,
863c9638	129	.gpio_reset = OVERO_SMSC911X_NRESET,
21b42731	130	.flags = SMSC911X_USE_32BIT,
172ef275 SS	131	};
172ef275 SS	132
21b42731	133	static struct omap_smsc911x_platform_data smsc911x2_cfg = {
a5ba7ae2	134	.id = 1,
21b42731 MR	135	.cs = OVERO_SMSC911X2_CS,
	136	.gpio_irq = OVERO_SMSC911X2_GPIO,
	137	.gpio_reset = -EINVAL,
	138	.flags = SMSC911X_USE_32BIT,
a5ba7ae2 SS	139	};
a5ba7ae2 SS	140
21b42731	141	static void __init overo_init_smsc911x(void)
172ef275	142	{
21b42731 MR	143	gpmc_smsc911x_init(&smsc911x_cfg);
21b42731 MR	144	gpmc_smsc911x_init(&smsc911x2_cfg);
172ef275 SS	145	}
	146
	147	#else
	148	static inline void __init overo_init_smsc911x(void) { return; }
	149	#endif
	150
7b12d7b6	151	/* DSS */
7b12d7b6 SS	152	#define OVERO_GPIO_LCD_EN 144
	153	#define OVERO_GPIO_LCD_BL 145
	154
45a279c5 TV	155	static struct connector_atv_platform_data overo_tv_pdata = {
	156	.name = "tv",
	157	.source = "venc.0",
	158	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
	159	.invert_polarity = false,
7b12d7b6 SS	160	};
7b12d7b6 SS	161
45a279c5 TV	162	static struct platform_device overo_tv_connector_device = {
	163	.name = "connector-analog-tv",
	164	.id = 0,
	165	.dev.platform_data = &overo_tv_pdata,
7b12d7b6 SS	166	};
7b12d7b6 SS	167
45a279c5 TV	168	static const struct display_timing overo_lcd43_videomode = {
	169	.pixelclock = { 0, 9200000, 0 },
	170
	171	.hactive = { 0, 480, 0 },
	172	.hfront_porch = { 0, 8, 0 },
	173	.hback_porch = { 0, 4, 0 },
	174	.hsync_len = { 0, 41, 0 },
	175
	176	.vactive = { 0, 272, 0 },
	177	.vfront_porch = { 0, 4, 0 },
	178	.vback_porch = { 0, 2, 0 },
	179	.vsync_len = { 0, 10, 0 },
	180
	181	.flags = DISPLAY_FLAGS_HSYNC_LOW \| DISPLAY_FLAGS_VSYNC_LOW \|
	182	DISPLAY_FLAGS_DE_HIGH \| DISPLAY_FLAGS_PIXDATA_POSEDGE,
7b12d7b6 SS	183	};
7b12d7b6 SS	184
45a279c5 TV	185	static struct panel_dpi_platform_data overo_lcd43_pdata = {
	186	.name = "lcd43",
	187	.source = "dpi.0",
	188
	189	.data_lines = 24,
	190
	191	.display_timing = &overo_lcd43_videomode,
	192
	193	.enable_gpio = OVERO_GPIO_LCD_EN,
	194	.backlight_gpio = OVERO_GPIO_LCD_BL,
7b12d7b6 SS	195	};
7b12d7b6 SS	196
45a279c5 TV	197	static struct platform_device overo_lcd43_device = {
	198	.name = "panel-dpi",
	199	.id = 0,
	200	.dev.platform_data = &overo_lcd43_pdata,
7b12d7b6 SS	201	};
7b12d7b6 SS	202
45a279c5 TV	203	static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
	204	.name = "dvi",
	205	.source = "tfp410.0",
	206	.i2c_bus_num = 3,
5c4e5995 AT	207	};
5c4e5995 AT	208
45a279c5 TV	209	static struct platform_device overo_dvi_connector_device = {
	210	.name = "connector-dvi",
	211	.id = 0,
	212	.dev.platform_data = &overo_dvi_connector_pdata,
7b12d7b6	213	};
7b12d7b6	214
45a279c5 TV	215	static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
	216	.name = "tfp410.0",
	217	.source = "dpi.0",
	218	.data_lines = 24,
	219	.power_down_gpio = -1,
	220	};
	221
	222	static struct platform_device overo_tfp410_device = {
	223	.name = "tfp410",
	224	.id = 0,
	225	.dev.platform_data = &overo_tfp410_pdata,
7b12d7b6 SS	226	};
	227
	228	static struct omap_dss_board_info overo_dss_data = {
45a279c5	229	.default_display_name = "lcd43",
7b12d7b6 SS	230	};
7b12d7b6 SS	231
45a279c5 TV	232	static void __init overo_display_init(void)
	233	{
	234	omap_display_init(&overo_dss_data);
	235
	236	if (!overo_use_lcd35)
	237	platform_device_register(&overo_lcd43_device);
	238	platform_device_register(&overo_tfp410_device);
	239	platform_device_register(&overo_dvi_connector_device);
	240	platform_device_register(&overo_tv_connector_device);
	241	}
	242
eba2645a SS	243	static struct mtd_partition overo_nand_partitions[] = {
	244	{
	245	.name = "xloader",
	246	.offset = 0, /* Offset = 0x00000 */
	247	.size = 4 * NAND_BLOCK_SIZE,
	248	.mask_flags = MTD_WRITEABLE
	249	},
	250	{
	251	.name = "uboot",
	252	.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
	253	.size = 14 * NAND_BLOCK_SIZE,
	254	},
	255	{
	256	.name = "uboot environment",
	257	.offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
	258	.size = 2 * NAND_BLOCK_SIZE,
	259	},
	260	{
	261	.name = "linux",
	262	.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
	263	.size = 32 * NAND_BLOCK_SIZE,
	264	},
	265	{
	266	.name = "rootfs",
	267	.offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
	268	.size = MTDPART_SIZ_FULL,
	269	},
	270	};
	271
68ff0423	272	static struct omap2_hsmmc_info mmc[] = {
bb3b9d8e DB	273	{
bb3b9d8e DB	274	.mmc = 1,
3a63833e	275	.caps = MMC_CAP_4_BIT_DATA,
bb3b9d8e DB	276	.gpio_cd = -EINVAL,
	277	.gpio_wp = -EINVAL,
	278	},
	279	{
	280	.mmc = 2,
3a63833e	281	.caps = MMC_CAP_4_BIT_DATA,
bb3b9d8e DB	282	.gpio_cd = -EINVAL,
	283	.gpio_wp = -EINVAL,
	284	.transceiver = true,
	285	.ocr_mask = 0x00100000, /* 3.3V */
	286	},
	287	{} /* Terminator */
	288	};
	289
786b01a8 OD	290	static struct regulator_consumer_supply overo_vmmc1_supply[] = {
786b01a8 OD	291	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
bb3b9d8e DB	292	};
bb3b9d8e DB	293
7c94f68d SS	294	#if defined(CONFIG_LEDS_GPIO) \|\| defined(CONFIG_LEDS_GPIO_MODULE)
	295	#include <linux/leds.h>
	296
	297	static struct gpio_led gpio_leds[] = {
	298	{
	299	.name = "overo:red:gpio21",
	300	.default_trigger = "heartbeat",
	301	.gpio = 21,
	302	.active_low = true,
	303	},
	304	{
	305	.name = "overo:blue:gpio22",
	306	.default_trigger = "none",
	307	.gpio = 22,
	308	.active_low = true,
	309	},
	310	{
	311	.name = "overo:blue:COM",
	312	.default_trigger = "mmc0",
	313	.gpio = -EINVAL, /* gets replaced */
	314	.active_low = true,
	315	},
	316	};
	317
	318	static struct gpio_led_platform_data gpio_leds_pdata = {
	319	.leds = gpio_leds,
	320	.num_leds = ARRAY_SIZE(gpio_leds),
	321	};
	322
	323	static struct platform_device gpio_leds_device = {
	324	.name = "leds-gpio",
	325	.id = -1,
	326	.dev = {
	327	.platform_data = &gpio_leds_pdata,
	328	},
	329	};
	330
	331	static void __init overo_init_led(void)
	332	{
	333	platform_device_register(&gpio_leds_device);
	334	}
	335
	336	#else
	337	static inline void __init overo_init_led(void) { return; }
	338	#endif
	339
cce18a94 SS	340	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
	341	#include <linux/input.h>
	342	#include <linux/gpio_keys.h>
	343
	344	static struct gpio_keys_button gpio_buttons[] = {
	345	{
	346	.code = BTN_0,
	347	.gpio = 23,
	348	.desc = "button0",
	349	.wakeup = 1,
	350	},
	351	{
	352	.code = BTN_1,
	353	.gpio = 14,
	354	.desc = "button1",
	355	.wakeup = 1,
	356	},
	357	};
	358
	359	static struct gpio_keys_platform_data gpio_keys_pdata = {
	360	.buttons = gpio_buttons,
	361	.nbuttons = ARRAY_SIZE(gpio_buttons),
	362	};
	363
	364	static struct platform_device gpio_keys_device = {
	365	.name = "gpio-keys",
	366	.id = -1,
	367	.dev = {
	368	.platform_data = &gpio_keys_pdata,
	369	},
	370	};
	371
	372	static void __init overo_init_keys(void)
	373	{
	374	platform_device_register(&gpio_keys_device);
	375	}
	376
	377	#else
	378	static inline void __init overo_init_keys(void) { return; }
	379	#endif
	380
bb3b9d8e DB	381	static int overo_twl_gpio_setup(struct device *dev,
	382	unsigned gpio, unsigned ngpio)
	383	{
7c94f68d SS	384	#if defined(CONFIG_LEDS_GPIO) \|\| defined(CONFIG_LEDS_GPIO_MODULE)
	385	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
	386	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
	387	#endif
	388
bb3b9d8e DB	389	return 0;
	390	}
	391
90c62bf0	392	static struct twl4030_gpio_platform_data overo_gpio_data = {
7c94f68d	393	.use_leds = true,
bb3b9d8e DB	394	.setup = overo_twl_gpio_setup,
	395	};
	396
bb3b9d8e DB	397	static struct regulator_init_data overo_vmmc1 = {
	398	.constraints = {
	399	.min_uV = 1850000,
	400	.max_uV = 3150000,
	401	.valid_modes_mask = REGULATOR_MODE_NORMAL
	402	\| REGULATOR_MODE_STANDBY,
	403	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
	404	\| REGULATOR_CHANGE_MODE
	405	\| REGULATOR_CHANGE_STATUS,
	406	},
786b01a8 OD	407	.num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
786b01a8 OD	408	.consumer_supplies = overo_vmmc1_supply,
90c62bf0 TL	409	};
	410
	411	static struct twl4030_platform_data overo_twldata = {
90c62bf0	412	.gpio = &overo_gpio_data,
bb3b9d8e	413	.vmmc1 = &overo_vmmc1,
90c62bf0 TL	414	};
90c62bf0 TL	415
eba2645a SS	416	static int __init overo_i2c_init(void)
eba2645a SS	417	{
827ed9ae	418	omap3_pmic_get_config(&overo_twldata,
b252b0ef PU	419	TWL_COMMON_PDATA_USB \| TWL_COMMON_PDATA_AUDIO,
	420	TWL_COMMON_REGULATOR_VDAC \| TWL_COMMON_REGULATOR_VPLL2);
	421
	422	overo_twldata.vpll2->constraints.name = "VDVI";
	423
fbd8071c	424	omap3_pmic_init("tps65950", &overo_twldata);
eba2645a SS	425	/* i2c2 pins are used for gpio */
	426	omap_register_i2c_bus(3, 400, NULL, 0);
	427	return 0;
	428	}
	429
45a279c5 TV	430	static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
	431	.name = "lcd35",
	432	.source = "dpi.0",
	433
	434	.data_lines = 24,
	435
	436	.enable_gpio = OVERO_GPIO_LCD_EN,
	437	.backlight_gpio = OVERO_GPIO_LCD_BL,
	438	};
	439
	440	/*
	441	* NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
	442	* selection is done based on the overo_use_lcd35 field. If new SPI
	443	* devices are added here, extra work is needed to make only the lgphilips panel
	444	* affected by the overo_use_lcd35 field.
	445	*/
7b12d7b6	446	static struct spi_board_info overo_spi_board_info[] __initdata = {
7b12d7b6	447	{
45a279c5	448	.modalias = "panel_lgphilips_lb035q02",
7b12d7b6 SS	449	.bus_num = 1,
	450	.chip_select = 1,
	451	.max_speed_hz = 500000,
	452	.mode = SPI_MODE_3,
45a279c5	453	.platform_data = &overo_lcd35_pdata,
7b12d7b6	454	},
eba2645a SS	455	};
eba2645a SS	456
7b12d7b6 SS	457	static int __init overo_spi_init(void)
	458	{
	459	overo_ads7846_init();
45a279c5 TV	460
	461	if (overo_use_lcd35) {
	462	spi_register_board_info(overo_spi_board_info,
	463	ARRAY_SIZE(overo_spi_board_info));
	464	}
7b12d7b6 SS	465	return 0;
7b12d7b6 SS	466	}
eba2645a	467
14c67d23 RQ	468	static struct usbhs_phy_data phy_data[] __initdata = {
	469	{
	470	.port = 2,
	471	.reset_gpio = OVERO_GPIO_USBH_NRESET,
	472	.vcc_gpio = -EINVAL,
	473	},
	474	};
	475
42973159	476	static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
181b250c	477	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
58a5491c FB	478	};
58a5491c FB	479
ca5742bd TL	480	#ifdef CONFIG_OMAP_MUX
	481	static struct omap_board_mux board_mux[] __initdata = {
	482	{ .reg_offset = OMAP_MUX_TERMINATOR },
	483	};
ca5742bd	484	#endif
58a5491c	485
bc593f5d IG	486	static struct gpio overo_bt_gpios[] __initdata = {
	487	{ OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" },
	488	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
884b8369 MM	489	};
884b8369 MM	490
5b3689f4 RD	491	static struct regulator_consumer_supply dummy_supplies[] = {
	492	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
	493	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
	494	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
	495	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
	496	};
	497
eba2645a SS	498	static void __init overo_init(void)
eba2645a SS	499	{
bc593f5d IG	500	int ret;
bc593f5d IG	501
45a279c5 TV	502	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
	503	overo_use_lcd35 = true;
	504
5b3689f4	505	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
ca5742bd	506	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
eba2645a	507	overo_i2c_init();
95669d78	508	omap_hsmmc_init(mmc);
eba2645a	509	omap_serial_init();
a4ca9dbe TL	510	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
a4ca9dbe TL	511	mt46h32m32lf6_sdrc_params);
2e618261 AM	512	board_nand_init(overo_nand_partitions,
2e618261 AM	513	ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
51482be9	514	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
9e18630b	515	usb_musb_init(NULL);
14c67d23 RQ	516
14c67d23 RQ	517	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
9e64bb1e	518	usbhs_init(&usbhs_bdata);
7b12d7b6	519	overo_spi_init();
172ef275	520	overo_init_smsc911x();
7c94f68d	521	overo_init_led();
cce18a94	522	overo_init_keys();
40234bf7	523	omap_twl4030_audio_init("overo", NULL);
eba2645a	524
45a279c5 TV	525	overo_display_init();
45a279c5 TV	526
9fb97412	527	/* Ensure SDRC pins are mux'd for self-refresh */
4896e394 TL	528	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
4896e394 TL	529	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
9fb97412	530
bc593f5d IG	531	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
	532	"OVERO_GPIO_W2W_NRESET");
	533	if (ret == 0) {
eba2645a SS	534	gpio_export(OVERO_GPIO_W2W_NRESET, 0);
	535	gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
	536	udelay(10);
	537	gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
	538	} else {
7852ec05	539	pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
eba2645a SS	540	}
eba2645a SS	541
bc593f5d IG	542	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
	543	if (ret) {
	544	pr_err("%s: could not obtain BT gpios\n", __func__);
	545	} else {
eba2645a	546	gpio_export(OVERO_GPIO_BT_XGATE, 0);
eba2645a SS	547	gpio_export(OVERO_GPIO_BT_NRESET, 0);
	548	gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
	549	mdelay(6);
	550	gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
eba2645a SS	551	}
eba2645a SS	552
bc593f5d IG	553	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
	554	"OVERO_GPIO_USBH_CPEN");
	555	if (ret == 0)
eba2645a SS	556	gpio_export(OVERO_GPIO_USBH_CPEN, 0);
eba2645a SS	557	else
7852ec05	558	pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
eba2645a SS	559	}
eba2645a SS	560
eba2645a	561	MACHINE_START(OVERO, "Gumstix Overo")
5e52b435	562	.atag_offset = 0x100,
71ee7dad	563	.reserve = omap_reserve,
3dc3bad6	564	.map_io = omap3_map_io,
8f5b5a41	565	.init_early = omap35xx_init_early,
741e3a89	566	.init_irq = omap3_init_irq,
6b2f55d7	567	.handle_irq = omap3_intc_handle_irq,
eba2645a	568	.init_machine = overo_init,
bbd707ac	569	.init_late = omap35xx_init_late,
6bb27d73	570	.init_time = omap3_sync32k_timer_init,
187e3e06	571	.restart = omap3xxx_restart,
eba2645a	572	MACHINE_END