[deliverable/linux.git] / arch / arm / mach-omap2 / board-overo.c

/*
 * board-overo.c (Gumstix Overo)
 *
 * Initial code: Steve Sakoman <steve@sakoman.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/spi/spi.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>

#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/mcspi.h>
#include <plat/usb.h>

#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"

#define OVERO_GPIO_BT_XGATE	15
#define OVERO_GPIO_W2W_NRESET	16
#define OVERO_GPIO_PENDOWN	114
#define OVERO_GPIO_BT_NRESET	164
#define OVERO_GPIO_USBH_CPEN	168
#define OVERO_GPIO_USBH_NRESET	183

#define OVERO_SMSC911X_CS      5
#define OVERO_SMSC911X_GPIO    176
#define OVERO_SMSC911X2_CS     4
#define OVERO_SMSC911X2_GPIO   65

#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)

/* fixed regulator for ads7846 */
static struct regulator_consumer_supply ads7846_supply[] = {
	REGULATOR_SUPPLY("vcc", "spi1.0"),
};

static struct regulator_init_data vads7846_regulator = {
	.constraints = {
		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
	.consumer_supplies	= ads7846_supply,
};

static struct fixed_voltage_config vads7846 = {
	.supply_name		= "vads7846",
	.microvolts		= 3300000, /* 3.3V */
	.gpio			= -EINVAL,
	.startup_delay		= 0,
	.init_data		= &vads7846_regulator,
};

static struct platform_device vads7846_device = {
	.name		= "reg-fixed-voltage",
	.id		= 1,
	.dev = {
		.platform_data = &vads7846,
	},
};

static void __init overo_ads7846_init(void)
{
	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
	platform_device_register(&vads7846_device);
}

#else
static inline void __init overo_ads7846_init(void) { return; }
#endif

#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)

#include <linux/smsc911x.h>
#include <plat/gpmc-smsc911x.h>

static struct omap_smsc911x_platform_data smsc911x_cfg = {
	.id		= 0,
	.cs             = OVERO_SMSC911X_CS,
	.gpio_irq       = OVERO_SMSC911X_GPIO,
	.gpio_reset     = -EINVAL,
	.flags		= SMSC911X_USE_32BIT,
};

static struct omap_smsc911x_platform_data smsc911x2_cfg = {
	.id		= 1,
	.cs             = OVERO_SMSC911X2_CS,
	.gpio_irq       = OVERO_SMSC911X2_GPIO,
	.gpio_reset     = -EINVAL,
	.flags		= SMSC911X_USE_32BIT,
};

static void __init overo_init_smsc911x(void)
{
	gpmc_smsc911x_init(&smsc911x_cfg);
	gpmc_smsc911x_init(&smsc911x2_cfg);
}

#else
static inline void __init overo_init_smsc911x(void) { return; }
#endif

/* DSS */
static int lcd_enabled;
static int dvi_enabled;

#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145

static struct gpio overo_dss_gpios[] __initdata = {
	{ OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
	{ OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
};

static void __init overo_display_init(void)
{
	if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
		printk(KERN_ERR "could not obtain DSS control GPIOs\n");
		return;
	}

	gpio_export(OVERO_GPIO_LCD_EN, 0);
	gpio_export(OVERO_GPIO_LCD_BL, 0);
}

static struct tfp410_platform_data dvi_panel = {
	.i2c_bus_num		= 3,
	.power_down_gpio	= -1,
};

static struct omap_dss_device overo_dvi_device = {
	.name			= "dvi",
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.driver_name		= "tfp410",
	.data			= &dvi_panel,
	.phy.dpi.data_lines	= 24,
};

static struct omap_dss_device overo_tv_device = {
	.name = "tv",
	.driver_name = "venc",
	.type = OMAP_DISPLAY_TYPE_VENC,
	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
};

static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
{
	if (dvi_enabled) {
		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
		return -EINVAL;
	}

	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
	lcd_enabled = 1;
	return 0;
}

static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
{
	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
	lcd_enabled = 0;
}

static struct panel_generic_dpi_data lcd43_panel = {
	.name			= "samsung_lte430wq_f0c",
	.platform_enable	= overo_panel_enable_lcd,
	.platform_disable	= overo_panel_disable_lcd,
};

static struct omap_dss_device overo_lcd43_device = {
	.name			= "lcd43",
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.driver_name		= "generic_dpi_panel",
	.data			= &lcd43_panel,
	.phy.dpi.data_lines	= 24,
};

#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
static struct omap_dss_device overo_lcd35_device = {
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.name			= "lcd35",
	.driver_name		= "lgphilips_lb035q02_panel",
	.phy.dpi.data_lines	= 24,
	.platform_enable	= overo_panel_enable_lcd,
	.platform_disable	= overo_panel_disable_lcd,
};
#endif

static struct omap_dss_device *overo_dss_devices[] = {
	&overo_dvi_device,
	&overo_tv_device,
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
	&overo_lcd35_device,
#endif
	&overo_lcd43_device,
};

static struct omap_dss_board_info overo_dss_data = {
	.num_devices	= ARRAY_SIZE(overo_dss_devices),
	.devices	= overo_dss_devices,
	.default_device	= &overo_dvi_device,
};

static struct mtd_partition overo_nand_partitions[] = {
	{
		.name           = "xloader",
		.offset         = 0,			/* Offset = 0x00000 */
		.size           = 4 * NAND_BLOCK_SIZE,
		.mask_flags     = MTD_WRITEABLE
	},
	{
		.name           = "uboot",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
		.size           = 14 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "uboot environment",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
		.size           = 2 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "linux",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
		.size           = 32 * NAND_BLOCK_SIZE,
	},
	{
		.name           = "rootfs",
		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
		.size           = MTDPART_SIZ_FULL,
	},
};

static struct omap2_hsmmc_info mmc[] = {
	{
		.mmc		= 1,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= -EINVAL,
	},
	{
		.mmc		= 2,
		.caps		= MMC_CAP_4_BIT_DATA,
		.gpio_cd	= -EINVAL,
		.gpio_wp	= -EINVAL,
		.transceiver	= true,
		.ocr_mask	= 0x00100000,	/* 3.3V */
	},
	{}	/* Terminator */
};

static struct regulator_consumer_supply overo_vmmc1_supply[] = {
	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};

#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
#include <linux/leds.h>

static struct gpio_led gpio_leds[] = {
	{
		.name			= "overo:red:gpio21",
		.default_trigger	= "heartbeat",
		.gpio			= 21,
		.active_low		= true,
	},
	{
		.name			= "overo:blue:gpio22",
		.default_trigger	= "none",
		.gpio			= 22,
		.active_low		= true,
	},
	{
		.name			= "overo:blue:COM",
		.default_trigger	= "mmc0",
		.gpio			= -EINVAL,	/* gets replaced */
		.active_low		= true,
	},
};

static struct gpio_led_platform_data gpio_leds_pdata = {
	.leds		= gpio_leds,
	.num_leds	= ARRAY_SIZE(gpio_leds),
};

static struct platform_device gpio_leds_device = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_leds_pdata,
	},
};

static void __init overo_init_led(void)
{
	platform_device_register(&gpio_leds_device);
}

#else
static inline void __init overo_init_led(void) { return; }
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>

static struct gpio_keys_button gpio_buttons[] = {
	{
		.code			= BTN_0,
		.gpio			= 23,
		.desc			= "button0",
		.wakeup			= 1,
	},
	{
		.code			= BTN_1,
		.gpio			= 14,
		.desc			= "button1",
		.wakeup			= 1,
	},
};

static struct gpio_keys_platform_data gpio_keys_pdata = {
	.buttons	= gpio_buttons,
	.nbuttons	= ARRAY_SIZE(gpio_buttons),
};

static struct platform_device gpio_keys_device = {
	.name	= "gpio-keys",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_keys_pdata,
	},
};

static void __init overo_init_keys(void)
{
	platform_device_register(&gpio_keys_device);
}

#else
static inline void __init overo_init_keys(void) { return; }
#endif

static int overo_twl_gpio_setup(struct device *dev,
		unsigned gpio, unsigned ngpio)
{
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
#endif

	return 0;
}

static struct twl4030_gpio_platform_data overo_gpio_data = {
	.use_leds	= true,
	.setup		= overo_twl_gpio_setup,
};

static struct regulator_init_data overo_vmmc1 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 3150000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
	.consumer_supplies	= overo_vmmc1_supply,
};

static struct twl4030_platform_data overo_twldata = {
	.gpio		= &overo_gpio_data,
	.vmmc1		= &overo_vmmc1,
};

static int __init overo_i2c_init(void)
{
	omap3_pmic_get_config(&overo_twldata,
			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);

	overo_twldata.vpll2->constraints.name = "VDVI";

	omap3_pmic_init("tps65950", &overo_twldata);
	/* i2c2 pins are used for gpio */
	omap_register_i2c_bus(3, 400, NULL, 0);
	return 0;
}

static struct spi_board_info overo_spi_board_info[] __initdata = {
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
	{
		.modalias		= "lgphilips_lb035q02_panel-spi",
		.bus_num		= 1,
		.chip_select		= 1,
		.max_speed_hz		= 500000,
		.mode			= SPI_MODE_3,
	},
#endif
};

static int __init overo_spi_init(void)
{
	overo_ads7846_init();
	spi_register_board_info(overo_spi_board_info,
			ARRAY_SIZE(overo_spi_board_info));
	return 0;
}

static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
	.phy_reset  = true,
	.reset_gpio_port[0]  = -EINVAL,
	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
	.reset_gpio_port[2]  = -EINVAL
};

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif

static struct gpio overo_bt_gpios[] __initdata = {
	{ OVERO_GPIO_BT_XGATE,	GPIOF_OUT_INIT_LOW,	"lcd enable"    },
	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
};

static struct regulator_consumer_supply dummy_supplies[] = {
	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
};

static void __init overo_init(void)
{
	int ret;

	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	overo_i2c_init();
	omap_hsmmc_init(mmc);
	omap_display_init(&overo_dss_data);
	omap_serial_init();
	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
				  mt46h32m32lf6_sdrc_params);
	omap_nand_flash_init(0, overo_nand_partitions,
			     ARRAY_SIZE(overo_nand_partitions));
	usb_musb_init(NULL);
	usbhs_init(&usbhs_bdata);
	overo_spi_init();
	overo_init_smsc911x();
	overo_display_init();
	overo_init_led();
	overo_init_keys();

	/* Ensure SDRC pins are mux'd for self-refresh */
	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
			       "OVERO_GPIO_W2W_NRESET");
	if (ret == 0) {
		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
		udelay(10);
		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
	} else {
		printk(KERN_ERR "could not obtain gpio for "
					"OVERO_GPIO_W2W_NRESET\n");
	}

	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
	if (ret) {
		pr_err("%s: could not obtain BT gpios\n", __func__);
	} else {
		gpio_export(OVERO_GPIO_BT_XGATE, 0);
		gpio_export(OVERO_GPIO_BT_NRESET, 0);
		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
		mdelay(6);
		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
	}

	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
			       "OVERO_GPIO_USBH_CPEN");
	if (ret == 0)
		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
	else
		printk(KERN_ERR "could not obtain gpio for "
					"OVERO_GPIO_USBH_CPEN\n");
}

MACHINE_START(OVERO, "Gumstix Overo")
	.atag_offset	= 0x100,
	.reserve	= omap_reserve,
	.map_io		= omap3_map_io,
	.init_early	= omap35xx_init_early,
	.init_irq	= omap3_init_irq,
	.handle_irq	= omap3_intc_handle_irq,
	.init_machine	= overo_init,
	.init_late	= omap35xx_init_late,
	.timer		= &omap3_timer,
	.restart	= omap_prcm_restart,
MACHINE_END
Commit	Line	Data
eba2645a SS	1	/*
	2	* board-overo.c (Gumstix Overo)
	3	*
	4	* Initial code: Steve Sakoman <steve@sakoman.com>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public License
	8	* version 2 as published by the Free Software Foundation.
	9	*
	10	* This program is distributed in the hope that it will be useful, but
	11	* WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	13	* General Public License for more details.
	14	*
	15	* You should have received a copy of the GNU General Public License
	16	* along with this program; if not, write to the Free Software
	17	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
	18	* 02110-1301 USA
	19	*
	20	*/
	21
	22	#include <linux/clk.h>
	23	#include <linux/delay.h>
	24	#include <linux/err.h>
	25	#include <linux/init.h>
	26	#include <linux/io.h>
f9fa1bb9	27	#include <linux/gpio.h>
eba2645a SS	28	#include <linux/kernel.h>
eba2645a SS	29	#include <linux/platform_device.h>
b07682b6	30	#include <linux/i2c/twl.h>
bb3b9d8e	31	#include <linux/regulator/machine.h>
ca0a6a64	32	#include <linux/regulator/fixed.h>
7b12d7b6	33	#include <linux/spi/spi.h>
eba2645a SS	34
	35	#include <linux/mtd/mtd.h>
	36	#include <linux/mtd/nand.h>
	37	#include <linux/mtd/partitions.h>
3a63833e	38	#include <linux/mmc/host.h>
eba2645a SS	39
	40	#include <asm/mach-types.h>
	41	#include <asm/mach/arch.h>
	42	#include <asm/mach/flash.h>
	43	#include <asm/mach/map.h>
	44
4e65331c	45	#include "common.h"
a0b38cc4	46	#include <video/omapdss.h>
f8ae2f08	47	#include <video/omap-panel-generic-dpi.h>
dac8eb5f	48	#include <video/omap-panel-tfp410.h>
ce491cf8	49	#include <plat/gpmc.h>
ce491cf8	50	#include <plat/nand.h>
7b12d7b6	51	#include <plat/mcspi.h>
ce491cf8	52	#include <plat/usb.h>
eba2645a	53
ca5742bd	54	#include "mux.h"
2e12bd7e	55	#include "sdram-micron-mt46h32m32lf-6.h"
d02a900b	56	#include "hsmmc.h"
96974a24	57	#include "common-board-devices.h"
90c62bf0	58
0d4d9ab0 TL	59	#define OVERO_GPIO_BT_XGATE 15
0d4d9ab0 TL	60	#define OVERO_GPIO_W2W_NRESET 16
6fd210a9	61	#define OVERO_GPIO_PENDOWN 114
0d4d9ab0 TL	62	#define OVERO_GPIO_BT_NRESET 164
	63	#define OVERO_GPIO_USBH_CPEN 168
	64	#define OVERO_GPIO_USBH_NRESET 183
	65
172ef275 SS	66	#define OVERO_SMSC911X_CS 5
172ef275 SS	67	#define OVERO_SMSC911X_GPIO 176
5c9a29ed SS	68	#define OVERO_SMSC911X2_CS 4
5c9a29ed SS	69	#define OVERO_SMSC911X2_GPIO 65
172ef275	70
c6a81316 SS	71	#if defined(CONFIG_TOUCHSCREEN_ADS7846) \|\| \
	72	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
	73
ca0a6a64	74	/* fixed regulator for ads7846 */
786b01a8 OD	75	static struct regulator_consumer_supply ads7846_supply[] = {
	76	REGULATOR_SUPPLY("vcc", "spi1.0"),
	77	};
ca0a6a64 SS	78
	79	static struct regulator_init_data vads7846_regulator = {
	80	.constraints = {
	81	.valid_ops_mask = REGULATOR_CHANGE_STATUS,
	82	},
786b01a8 OD	83	.num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
786b01a8 OD	84	.consumer_supplies = ads7846_supply,
ca0a6a64 SS	85	};
	86
	87	static struct fixed_voltage_config vads7846 = {
	88	.supply_name = "vads7846",
	89	.microvolts = 3300000, /* 3.3V */
	90	.gpio = -EINVAL,
	91	.startup_delay = 0,
	92	.init_data = &vads7846_regulator,
	93	};
	94
	95	static struct platform_device vads7846_device = {
	96	.name = "reg-fixed-voltage",
	97	.id = 1,
	98	.dev = {
	99	.platform_data = &vads7846,
	100	},
c6a81316 SS	101	};
	102
	103	static void __init overo_ads7846_init(void)
	104	{
96974a24	105	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
ca0a6a64	106	platform_device_register(&vads7846_device);
c6a81316 SS	107	}
	108
	109	#else
	110	static inline void __init overo_ads7846_init(void) { return; }
	111	#endif
	112
172ef275 SS	113	#if defined(CONFIG_SMSC911X) \|\| defined(CONFIG_SMSC911X_MODULE)
	114
	115	#include <linux/smsc911x.h>
21b42731	116	#include <plat/gpmc-smsc911x.h>
172ef275	117
21b42731	118	static struct omap_smsc911x_platform_data smsc911x_cfg = {
5c9a29ed	119	.id = 0,
21b42731 MR	120	.cs = OVERO_SMSC911X_CS,
	121	.gpio_irq = OVERO_SMSC911X_GPIO,
	122	.gpio_reset = -EINVAL,
	123	.flags = SMSC911X_USE_32BIT,
172ef275 SS	124	};
172ef275 SS	125
21b42731	126	static struct omap_smsc911x_platform_data smsc911x2_cfg = {
a5ba7ae2	127	.id = 1,
21b42731 MR	128	.cs = OVERO_SMSC911X2_CS,
	129	.gpio_irq = OVERO_SMSC911X2_GPIO,
	130	.gpio_reset = -EINVAL,
	131	.flags = SMSC911X_USE_32BIT,
a5ba7ae2 SS	132	};
a5ba7ae2 SS	133
21b42731	134	static void __init overo_init_smsc911x(void)
172ef275	135	{
21b42731 MR	136	gpmc_smsc911x_init(&smsc911x_cfg);
21b42731 MR	137	gpmc_smsc911x_init(&smsc911x2_cfg);
172ef275 SS	138	}
	139
	140	#else
	141	static inline void __init overo_init_smsc911x(void) { return; }
	142	#endif
	143
7b12d7b6 SS	144	/* DSS */
	145	static int lcd_enabled;
	146	static int dvi_enabled;
	147
	148	#define OVERO_GPIO_LCD_EN 144
	149	#define OVERO_GPIO_LCD_BL 145
	150
bc593f5d IG	151	static struct gpio overo_dss_gpios[] __initdata = {
	152	{ OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
	153	{ OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
	154	};
	155
7b12d7b6 SS	156	static void __init overo_display_init(void)
7b12d7b6 SS	157	{
bc593f5d IG	158	if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
	159	printk(KERN_ERR "could not obtain DSS control GPIOs\n");
	160	return;
	161	}
7b12d7b6	162
bc593f5d IG	163	gpio_export(OVERO_GPIO_LCD_EN, 0);
bc593f5d IG	164	gpio_export(OVERO_GPIO_LCD_BL, 0);
7b12d7b6 SS	165	}
7b12d7b6 SS	166
2e6f2ee7	167	static struct tfp410_platform_data dvi_panel = {
fcca7194	168	.i2c_bus_num = 3,
e813a55e	169	.power_down_gpio = -1,
7b12d7b6 SS	170	};
	171
	172	static struct omap_dss_device overo_dvi_device = {
	173	.name = "dvi",
	174	.type = OMAP_DISPLAY_TYPE_DPI,
2e6f2ee7	175	.driver_name = "tfp410",
7b12d7b6 SS	176	.data = &dvi_panel,
	177	.phy.dpi.data_lines = 24,
	178	};
	179
	180	static struct omap_dss_device overo_tv_device = {
	181	.name = "tv",
	182	.driver_name = "venc",
	183	.type = OMAP_DISPLAY_TYPE_VENC,
	184	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
	185	};
	186
	187	static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
	188	{
	189	if (dvi_enabled) {
	190	printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
	191	return -EINVAL;
	192	}
	193
	194	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
	195	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
	196	lcd_enabled = 1;
	197	return 0;
	198	}
	199
	200	static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
	201	{
	202	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
	203	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
	204	lcd_enabled = 0;
	205	}
	206
	207	static struct panel_generic_dpi_data lcd43_panel = {
	208	.name = "samsung_lte430wq_f0c",
	209	.platform_enable = overo_panel_enable_lcd,
	210	.platform_disable = overo_panel_disable_lcd,
	211	};
	212
	213	static struct omap_dss_device overo_lcd43_device = {
	214	.name = "lcd43",
	215	.type = OMAP_DISPLAY_TYPE_DPI,
	216	.driver_name = "generic_dpi_panel",
	217	.data = &lcd43_panel,
	218	.phy.dpi.data_lines = 24,
	219	};
	220
	221	#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) \|\| \
	222	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
	223	static struct omap_dss_device overo_lcd35_device = {
	224	.type = OMAP_DISPLAY_TYPE_DPI,
	225	.name = "lcd35",
	226	.driver_name = "lgphilips_lb035q02_panel",
	227	.phy.dpi.data_lines = 24,
	228	.platform_enable = overo_panel_enable_lcd,
	229	.platform_disable = overo_panel_disable_lcd,
	230	};
	231	#endif
	232
	233	static struct omap_dss_device *overo_dss_devices[] = {
	234	&overo_dvi_device,
	235	&overo_tv_device,
	236	#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) \|\| \
	237	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
	238	&overo_lcd35_device,
	239	#endif
240	&overo_lcd43_device,
241	};
242
243	static struct omap_dss_board_info overo_dss_data = {
244	.num_devices = ARRAY_SIZE(overo_dss_devices),
245	.devices = overo_dss_devices,
246	.default_device = &overo_dvi_device,
247	};
248
eba2645a SS	249	static struct mtd_partition overo_nand_partitions[] = {
	250	{
	251	.name = "xloader",
	252	.offset = 0, /* Offset = 0x00000 */
	253	.size = 4 * NAND_BLOCK_SIZE,
	254	.mask_flags = MTD_WRITEABLE
	255	},
	256	{
	257	.name = "uboot",
	258	.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
	259	.size = 14 * NAND_BLOCK_SIZE,
	260	},
	261	{
	262	.name = "uboot environment",
	263	.offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
	264	.size = 2 * NAND_BLOCK_SIZE,
	265	},
	266	{
	267	.name = "linux",
	268	.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
	269	.size = 32 * NAND_BLOCK_SIZE,
	270	},
	271	{
	272	.name = "rootfs",
	273	.offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
	274	.size = MTDPART_SIZ_FULL,
	275	},
	276	};
	277
68ff0423	278	static struct omap2_hsmmc_info mmc[] = {
bb3b9d8e DB	279	{
bb3b9d8e DB	280	.mmc = 1,
3a63833e	281	.caps = MMC_CAP_4_BIT_DATA,
bb3b9d8e DB	282	.gpio_cd = -EINVAL,
	283	.gpio_wp = -EINVAL,
	284	},
	285	{
	286	.mmc = 2,
3a63833e	287	.caps = MMC_CAP_4_BIT_DATA,
bb3b9d8e DB	288	.gpio_cd = -EINVAL,
	289	.gpio_wp = -EINVAL,
	290	.transceiver = true,
	291	.ocr_mask = 0x00100000, /* 3.3V */
	292	},
	293	{} /* Terminator */
	294	};
	295
786b01a8 OD	296	static struct regulator_consumer_supply overo_vmmc1_supply[] = {
786b01a8 OD	297	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
bb3b9d8e DB	298	};
bb3b9d8e DB	299
7c94f68d SS	300	#if defined(CONFIG_LEDS_GPIO) \|\| defined(CONFIG_LEDS_GPIO_MODULE)
	301	#include <linux/leds.h>
	302
	303	static struct gpio_led gpio_leds[] = {
	304	{
	305	.name = "overo:red:gpio21",
	306	.default_trigger = "heartbeat",
	307	.gpio = 21,
	308	.active_low = true,
	309	},
	310	{
	311	.name = "overo:blue:gpio22",
	312	.default_trigger = "none",
	313	.gpio = 22,
	314	.active_low = true,
	315	},
	316	{
	317	.name = "overo:blue:COM",
	318	.default_trigger = "mmc0",
	319	.gpio = -EINVAL, /* gets replaced */
	320	.active_low = true,
	321	},
	322	};
	323
	324	static struct gpio_led_platform_data gpio_leds_pdata = {
	325	.leds = gpio_leds,
	326	.num_leds = ARRAY_SIZE(gpio_leds),
	327	};
	328
	329	static struct platform_device gpio_leds_device = {
	330	.name = "leds-gpio",
	331	.id = -1,
	332	.dev = {
	333	.platform_data = &gpio_leds_pdata,
	334	},
	335	};
	336
	337	static void __init overo_init_led(void)
	338	{
	339	platform_device_register(&gpio_leds_device);
	340	}
	341
	342	#else
	343	static inline void __init overo_init_led(void) { return; }
	344	#endif
	345
cce18a94 SS	346	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
	347	#include <linux/input.h>
	348	#include <linux/gpio_keys.h>
	349
	350	static struct gpio_keys_button gpio_buttons[] = {
	351	{
	352	.code = BTN_0,
	353	.gpio = 23,
	354	.desc = "button0",
	355	.wakeup = 1,
	356	},
	357	{
	358	.code = BTN_1,
	359	.gpio = 14,
	360	.desc = "button1",
	361	.wakeup = 1,
	362	},
	363	};
	364
	365	static struct gpio_keys_platform_data gpio_keys_pdata = {
	366	.buttons = gpio_buttons,
	367	.nbuttons = ARRAY_SIZE(gpio_buttons),
	368	};
	369
	370	static struct platform_device gpio_keys_device = {
	371	.name = "gpio-keys",
	372	.id = -1,
	373	.dev = {
	374	.platform_data = &gpio_keys_pdata,
	375	},
	376	};
	377
	378	static void __init overo_init_keys(void)
	379	{
	380	platform_device_register(&gpio_keys_device);
	381	}
	382
	383	#else
	384	static inline void __init overo_init_keys(void) { return; }
	385	#endif
	386
bb3b9d8e DB	387	static int overo_twl_gpio_setup(struct device *dev,
	388	unsigned gpio, unsigned ngpio)
	389	{
7c94f68d SS	390	#if defined(CONFIG_LEDS_GPIO) \|\| defined(CONFIG_LEDS_GPIO_MODULE)
	391	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
	392	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
	393	#endif
	394
bb3b9d8e DB	395	return 0;
	396	}
	397
90c62bf0	398	static struct twl4030_gpio_platform_data overo_gpio_data = {
7c94f68d	399	.use_leds = true,
bb3b9d8e DB	400	.setup = overo_twl_gpio_setup,
	401	};
	402
bb3b9d8e DB	403	static struct regulator_init_data overo_vmmc1 = {
	404	.constraints = {
	405	.min_uV = 1850000,
	406	.max_uV = 3150000,
	407	.valid_modes_mask = REGULATOR_MODE_NORMAL
	408	\| REGULATOR_MODE_STANDBY,
	409	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
	410	\| REGULATOR_CHANGE_MODE
	411	\| REGULATOR_CHANGE_STATUS,
	412	},
786b01a8 OD	413	.num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
786b01a8 OD	414	.consumer_supplies = overo_vmmc1_supply,
90c62bf0 TL	415	};
	416
	417	static struct twl4030_platform_data overo_twldata = {
90c62bf0	418	.gpio = &overo_gpio_data,
bb3b9d8e	419	.vmmc1 = &overo_vmmc1,
90c62bf0 TL	420	};
90c62bf0 TL	421
eba2645a SS	422	static int __init overo_i2c_init(void)
eba2645a SS	423	{
827ed9ae	424	omap3_pmic_get_config(&overo_twldata,
b252b0ef PU	425	TWL_COMMON_PDATA_USB \| TWL_COMMON_PDATA_AUDIO,
	426	TWL_COMMON_REGULATOR_VDAC \| TWL_COMMON_REGULATOR_VPLL2);
	427
	428	overo_twldata.vpll2->constraints.name = "VDVI";
	429
fbd8071c	430	omap3_pmic_init("tps65950", &overo_twldata);
eba2645a SS	431	/* i2c2 pins are used for gpio */
	432	omap_register_i2c_bus(3, 400, NULL, 0);
	433	return 0;
	434	}
	435
7b12d7b6	436	static struct spi_board_info overo_spi_board_info[] __initdata = {
7b12d7b6 SS	437	#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) \|\| \
	438	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
	439	{
	440	.modalias = "lgphilips_lb035q02_panel-spi",
	441	.bus_num = 1,
	442	.chip_select = 1,
	443	.max_speed_hz = 500000,
	444	.mode = SPI_MODE_3,
	445	},
	446	#endif
eba2645a SS	447	};
eba2645a SS	448
7b12d7b6 SS	449	static int __init overo_spi_init(void)
	450	{
	451	overo_ads7846_init();
	452	spi_register_board_info(overo_spi_board_info,
	453	ARRAY_SIZE(overo_spi_board_info));
	454	return 0;
	455	}
eba2645a	456
181b250c KM	457	static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
	458	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
	459	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	460	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
58a5491c FB	461	.phy_reset = true,
	462	.reset_gpio_port[0] = -EINVAL,
	463	.reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
	464	.reset_gpio_port[2] = -EINVAL
	465	};
	466
ca5742bd TL	467	#ifdef CONFIG_OMAP_MUX
	468	static struct omap_board_mux board_mux[] __initdata = {
	469	{ .reg_offset = OMAP_MUX_TERMINATOR },
	470	};
ca5742bd	471	#endif
58a5491c	472
bc593f5d IG	473	static struct gpio overo_bt_gpios[] __initdata = {
	474	{ OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" },
	475	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
884b8369 MM	476	};
884b8369 MM	477
5b3689f4 RD	478	static struct regulator_consumer_supply dummy_supplies[] = {
	479	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
	480	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
	481	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
	482	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
	483	};
	484
eba2645a SS	485	static void __init overo_init(void)
eba2645a SS	486	{
bc593f5d IG	487	int ret;
bc593f5d IG	488
5b3689f4	489	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
ca5742bd	490	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
eba2645a	491	overo_i2c_init();
95669d78	492	omap_hsmmc_init(mmc);
7b12d7b6	493	omap_display_init(&overo_dss_data);
eba2645a	494	omap_serial_init();
a4ca9dbe TL	495	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
a4ca9dbe TL	496	mt46h32m32lf6_sdrc_params);
9a3f39ff MR	497	omap_nand_flash_init(0, overo_nand_partitions,
9a3f39ff MR	498	ARRAY_SIZE(overo_nand_partitions));
9e18630b	499	usb_musb_init(NULL);
9e64bb1e	500	usbhs_init(&usbhs_bdata);
7b12d7b6	501	overo_spi_init();
172ef275	502	overo_init_smsc911x();
7b12d7b6	503	overo_display_init();
7c94f68d	504	overo_init_led();
cce18a94	505	overo_init_keys();
eba2645a	506
9fb97412	507	/* Ensure SDRC pins are mux'd for self-refresh */
4896e394 TL	508	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
4896e394 TL	509	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
9fb97412	510
bc593f5d IG	511	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
	512	"OVERO_GPIO_W2W_NRESET");
	513	if (ret == 0) {
eba2645a SS	514	gpio_export(OVERO_GPIO_W2W_NRESET, 0);
	515	gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
	516	udelay(10);
	517	gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
	518	} else {
	519	printk(KERN_ERR "could not obtain gpio for "
	520	"OVERO_GPIO_W2W_NRESET\n");
	521	}
	522
bc593f5d IG	523	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
	524	if (ret) {
	525	pr_err("%s: could not obtain BT gpios\n", __func__);
	526	} else {
eba2645a	527	gpio_export(OVERO_GPIO_BT_XGATE, 0);
eba2645a SS	528	gpio_export(OVERO_GPIO_BT_NRESET, 0);
	529	gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
	530	mdelay(6);
	531	gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
eba2645a SS	532	}
eba2645a SS	533
bc593f5d IG	534	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
	535	"OVERO_GPIO_USBH_CPEN");
	536	if (ret == 0)
eba2645a SS	537	gpio_export(OVERO_GPIO_USBH_CPEN, 0);
	538	else
	539	printk(KERN_ERR "could not obtain gpio for "
	540	"OVERO_GPIO_USBH_CPEN\n");
eba2645a SS	541	}
eba2645a SS	542
eba2645a	543	MACHINE_START(OVERO, "Gumstix Overo")
5e52b435	544	.atag_offset = 0x100,
71ee7dad	545	.reserve = omap_reserve,
3dc3bad6	546	.map_io = omap3_map_io,
8f5b5a41	547	.init_early = omap35xx_init_early,
741e3a89	548	.init_irq = omap3_init_irq,
6b2f55d7	549	.handle_irq = omap3_intc_handle_irq,
eba2645a	550	.init_machine = overo_init,
bbd707ac	551	.init_late = omap35xx_init_late,
e74984e4	552	.timer = &omap3_timer,
baa95883	553	.restart = omap_prcm_restart,
eba2645a	554	MACHINE_END