Commit | Line | Data |
---|---|---|
ffe7f95b | 1 | /* |
9312fffb | 2 | * linux/arch/arm/mach-omap2/board-rx51-peripherals.c |
ffe7f95b LL |
3 | * |
4 | * Copyright (C) 2008-2009 Nokia | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/platform_device.h> | |
14 | #include <linux/input.h> | |
6135434a | 15 | #include <linux/input/matrix_keypad.h> |
ffe7f95b | 16 | #include <linux/spi/spi.h> |
c1f9a095 | 17 | #include <linux/wl12xx.h> |
3dad5356 | 18 | #include <linux/spi/tsc2005.h> |
ffe7f95b | 19 | #include <linux/i2c.h> |
ebeb53e1 | 20 | #include <linux/i2c/twl.h> |
ffe7f95b LL |
21 | #include <linux/clk.h> |
22 | #include <linux/delay.h> | |
23 | #include <linux/regulator/machine.h> | |
24 | #include <linux/gpio.h> | |
f014ee32 | 25 | #include <linux/gpio_keys.h> |
5e763d29 | 26 | #include <linux/mmc/host.h> |
10299e2e | 27 | #include <linux/power/isp1704_charger.h> |
2203747c AB |
28 | #include <linux/platform_data/spi-omap2-mcspi.h> |
29 | #include <linux/platform_data/mtd-onenand-omap2.h> | |
30 | ||
9f97da78 | 31 | #include <asm/system_info.h> |
ffe7f95b | 32 | |
4e65331c | 33 | #include "common.h" |
45c3eb7d | 34 | #include <linux/omap-dma.h> |
60628152 | 35 | #include "gpmc-smc91x.h" |
ffe7f95b | 36 | |
0a6f98c9 | 37 | #include "board-rx51.h" |
04aeae77 | 38 | |
87581fd4 | 39 | #include <sound/tlv320aic3x.h> |
64d06691 | 40 | #include <sound/tpa6130a2-plat.h> |
589541c0 JN |
41 | #include <media/radio-si4713.h> |
42 | #include <media/si4713.h> | |
df4094d2 | 43 | #include <linux/platform_data/leds-lp55xx.h> |
87581fd4 | 44 | |
9c2251dd | 45 | #include <linux/platform_data/tsl2563.h> |
3b511201 | 46 | #include <linux/lis3lv02d.h> |
70b5d737 | 47 | |
322c183c TK |
48 | #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) |
49 | #include <media/ir-rx51.h> | |
50 | #endif | |
51 | ||
4896e394 | 52 | #include "mux.h" |
1d5aef49 | 53 | #include "omap-pm.h" |
d02a900b | 54 | #include "hsmmc.h" |
fbd8071c | 55 | #include "common-board-devices.h" |
99f0b8d6 | 56 | #include "gpmc.h" |
b6ab13e7 | 57 | #include "gpmc-onenand.h" |
ffe7f95b | 58 | |
f52eeee8 AH |
59 | #define SYSTEM_REV_B_USES_VAUX3 0x1699 |
60 | #define SYSTEM_REV_S_USES_VAUX3 0x8 | |
61 | ||
a24e61a9 KV |
62 | #define RX51_WL1251_POWER_GPIO 87 |
63 | #define RX51_WL1251_IRQ_GPIO 42 | |
589541c0 JN |
64 | #define RX51_FMTX_RESET_GPIO 163 |
65 | #define RX51_FMTX_IRQ 53 | |
eeada9e8 | 66 | #define RX51_LP5523_CHIP_EN_GPIO 41 |
a24e61a9 | 67 | |
10299e2e KJ |
68 | #define RX51_USB_TRANSCEIVER_RST_GPIO 67 |
69 | ||
3dad5356 AK |
70 | #define RX51_TSC2005_RESET_GPIO 104 |
71 | #define RX51_TSC2005_IRQ_GPIO 100 | |
72 | ||
3b511201 AP |
73 | #define LIS302_IRQ1_GPIO 181 |
74 | #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ | |
75 | ||
a24e61a9 KV |
76 | /* list all spi devices here */ |
77 | enum { | |
78 | RX51_SPI_WL1251, | |
03e11104 | 79 | RX51_SPI_MIPID, /* LCD panel */ |
6996e7ff | 80 | RX51_SPI_TSC2005, /* Touch Controller */ |
a24e61a9 KV |
81 | }; |
82 | ||
83 | static struct wl12xx_platform_data wl1251_pdata; | |
3dad5356 | 84 | static struct tsc2005_platform_data tsc2005_pdata; |
a24e61a9 | 85 | |
3b511201 AP |
86 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
87 | static int lis302_setup(void) | |
88 | { | |
89 | int err; | |
90 | int irq1 = LIS302_IRQ1_GPIO; | |
91 | int irq2 = LIS302_IRQ2_GPIO; | |
92 | ||
93 | /* gpio for interrupt pin 1 */ | |
94 | err = gpio_request(irq1, "lis3lv02dl_irq1"); | |
95 | if (err) { | |
96 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
97 | goto out; | |
98 | } | |
99 | ||
100 | /* gpio for interrupt pin 2 */ | |
101 | err = gpio_request(irq2, "lis3lv02dl_irq2"); | |
102 | if (err) { | |
103 | gpio_free(irq1); | |
104 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
105 | goto out; | |
106 | } | |
107 | ||
108 | gpio_direction_input(irq1); | |
109 | gpio_direction_input(irq2); | |
110 | ||
111 | out: | |
112 | return err; | |
113 | } | |
114 | ||
115 | static int lis302_release(void) | |
116 | { | |
117 | gpio_free(LIS302_IRQ1_GPIO); | |
118 | gpio_free(LIS302_IRQ2_GPIO); | |
119 | ||
120 | return 0; | |
121 | } | |
122 | ||
123 | static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { | |
124 | .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | | |
125 | LIS3_CLICK_SINGLE_Z, | |
126 | /* Limits are 0.5g * value */ | |
127 | .click_thresh_x = 8, | |
128 | .click_thresh_y = 8, | |
129 | .click_thresh_z = 10, | |
130 | /* Click must be longer than time limit */ | |
131 | .click_time_limit = 9, | |
132 | /* Kind of debounce filter */ | |
133 | .click_latency = 50, | |
134 | ||
135 | /* Limits for all axis. millig-value / 18 to get HW values */ | |
136 | .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, | |
137 | .wakeup_thresh = 800 / 18, | |
138 | .wakeup_flags2 = LIS3_WAKEUP_Z_HI , | |
139 | .wakeup_thresh2 = 900 / 18, | |
140 | ||
141 | .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, | |
142 | ||
143 | /* Interrupt line 2 for click detection, line 1 for thresholds */ | |
144 | .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, | |
145 | ||
146 | .axis_x = LIS3_DEV_X, | |
147 | .axis_y = LIS3_INV_DEV_Y, | |
148 | .axis_z = LIS3_INV_DEV_Z, | |
149 | .setup_resources = lis302_setup, | |
150 | .release_resources = lis302_release, | |
151 | .st_min_limits = {-32, 3, 3}, | |
152 | .st_max_limits = {-3, 32, 32}, | |
3b511201 AP |
153 | }; |
154 | #endif | |
155 | ||
70b5d737 MN |
156 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
157 | static struct tsl2563_platform_data rx51_tsl2563_platform_data = { | |
158 | .cover_comp_gain = 16, | |
159 | }; | |
160 | #endif | |
161 | ||
eeada9e8 | 162 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) |
df4094d2 | 163 | static struct lp55xx_led_config rx51_lp5523_led_config[] = { |
eeada9e8 | 164 | { |
1e7bf5e3 | 165 | .name = "lp5523:kb1", |
eeada9e8 AP |
166 | .chan_nr = 0, |
167 | .led_current = 50, | |
168 | }, { | |
1e7bf5e3 | 169 | .name = "lp5523:kb2", |
eeada9e8 AP |
170 | .chan_nr = 1, |
171 | .led_current = 50, | |
172 | }, { | |
1e7bf5e3 | 173 | .name = "lp5523:kb3", |
eeada9e8 AP |
174 | .chan_nr = 2, |
175 | .led_current = 50, | |
176 | }, { | |
1e7bf5e3 | 177 | .name = "lp5523:kb4", |
eeada9e8 AP |
178 | .chan_nr = 3, |
179 | .led_current = 50, | |
180 | }, { | |
1e7bf5e3 | 181 | .name = "lp5523:b", |
eeada9e8 AP |
182 | .chan_nr = 4, |
183 | .led_current = 50, | |
184 | }, { | |
1e7bf5e3 | 185 | .name = "lp5523:g", |
eeada9e8 AP |
186 | .chan_nr = 5, |
187 | .led_current = 50, | |
188 | }, { | |
1e7bf5e3 | 189 | .name = "lp5523:r", |
eeada9e8 AP |
190 | .chan_nr = 6, |
191 | .led_current = 50, | |
192 | }, { | |
1e7bf5e3 | 193 | .name = "lp5523:kb5", |
eeada9e8 AP |
194 | .chan_nr = 7, |
195 | .led_current = 50, | |
196 | }, { | |
1e7bf5e3 | 197 | .name = "lp5523:kb6", |
eeada9e8 AP |
198 | .chan_nr = 8, |
199 | .led_current = 50, | |
200 | } | |
201 | }; | |
202 | ||
203 | static int rx51_lp5523_setup(void) | |
204 | { | |
205 | return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, | |
206 | "lp5523_enable"); | |
207 | } | |
208 | ||
209 | static void rx51_lp5523_release(void) | |
210 | { | |
211 | gpio_free(RX51_LP5523_CHIP_EN_GPIO); | |
212 | } | |
213 | ||
214 | static void rx51_lp5523_enable(bool state) | |
215 | { | |
216 | gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); | |
217 | } | |
218 | ||
df4094d2 | 219 | static struct lp55xx_platform_data rx51_lp5523_platform_data = { |
eeada9e8 AP |
220 | .led_config = rx51_lp5523_led_config, |
221 | .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), | |
df4094d2 | 222 | .clock_mode = LP55XX_CLOCK_AUTO, |
eeada9e8 AP |
223 | .setup_resources = rx51_lp5523_setup, |
224 | .release_resources = rx51_lp5523_release, | |
225 | .enable = rx51_lp5523_enable, | |
226 | }; | |
227 | #endif | |
228 | ||
a24e61a9 KV |
229 | static struct omap2_mcspi_device_config wl1251_mcspi_config = { |
230 | .turbo_mode = 0, | |
a24e61a9 KV |
231 | }; |
232 | ||
03e11104 RQ |
233 | static struct omap2_mcspi_device_config mipid_mcspi_config = { |
234 | .turbo_mode = 0, | |
03e11104 RQ |
235 | }; |
236 | ||
6996e7ff RQ |
237 | static struct omap2_mcspi_device_config tsc2005_mcspi_config = { |
238 | .turbo_mode = 0, | |
6996e7ff RQ |
239 | }; |
240 | ||
a24e61a9 KV |
241 | static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { |
242 | [RX51_SPI_WL1251] = { | |
243 | .modalias = "wl1251", | |
244 | .bus_num = 4, | |
245 | .chip_select = 0, | |
246 | .max_speed_hz = 48000000, | |
860fc976 | 247 | .mode = SPI_MODE_3, |
a24e61a9 KV |
248 | .controller_data = &wl1251_mcspi_config, |
249 | .platform_data = &wl1251_pdata, | |
250 | }, | |
03e11104 RQ |
251 | [RX51_SPI_MIPID] = { |
252 | .modalias = "acx565akm", | |
253 | .bus_num = 1, | |
254 | .chip_select = 2, | |
255 | .max_speed_hz = 6000000, | |
256 | .controller_data = &mipid_mcspi_config, | |
257 | }, | |
6996e7ff RQ |
258 | [RX51_SPI_TSC2005] = { |
259 | .modalias = "tsc2005", | |
260 | .bus_num = 1, | |
261 | .chip_select = 0, | |
6996e7ff RQ |
262 | .max_speed_hz = 6000000, |
263 | .controller_data = &tsc2005_mcspi_config, | |
3dad5356 | 264 | .platform_data = &tsc2005_pdata, |
6996e7ff | 265 | }, |
a24e61a9 KV |
266 | }; |
267 | ||
7605c0b0 PR |
268 | static struct platform_device rx51_battery_device = { |
269 | .name = "rx51-battery", | |
270 | .id = -1, | |
271 | }; | |
272 | ||
10299e2e KJ |
273 | static void rx51_charger_set_power(bool on) |
274 | { | |
275 | gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); | |
276 | } | |
277 | ||
278 | static struct isp1704_charger_data rx51_charger_data = { | |
279 | .set_power = rx51_charger_set_power, | |
280 | }; | |
281 | ||
fd0964c5 | 282 | static struct platform_device rx51_charger_device = { |
10299e2e KJ |
283 | .name = "isp1704_charger", |
284 | .dev = { | |
285 | .platform_data = &rx51_charger_data, | |
286 | }, | |
fd0964c5 HK |
287 | }; |
288 | ||
10299e2e KJ |
289 | static void __init rx51_charger_init(void) |
290 | { | |
291 | WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, | |
e5fe29c7 | 292 | GPIOF_OUT_INIT_HIGH, "isp1704_reset")); |
10299e2e | 293 | |
7605c0b0 | 294 | platform_device_register(&rx51_battery_device); |
10299e2e KJ |
295 | platform_device_register(&rx51_charger_device); |
296 | } | |
297 | ||
f014ee32 JN |
298 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
299 | ||
300 | #define RX51_GPIO_CAMERA_LENS_COVER 110 | |
301 | #define RX51_GPIO_CAMERA_FOCUS 68 | |
302 | #define RX51_GPIO_CAMERA_CAPTURE 69 | |
303 | #define RX51_GPIO_KEYPAD_SLIDE 71 | |
304 | #define RX51_GPIO_LOCK_BUTTON 113 | |
305 | #define RX51_GPIO_PROXIMITY 89 | |
306 | ||
307 | #define RX51_GPIO_DEBOUNCE_TIMEOUT 10 | |
308 | ||
309 | static struct gpio_keys_button rx51_gpio_keys[] = { | |
310 | { | |
311 | .desc = "Camera Lens Cover", | |
312 | .type = EV_SW, | |
313 | .code = SW_CAMERA_LENS_COVER, | |
314 | .gpio = RX51_GPIO_CAMERA_LENS_COVER, | |
315 | .active_low = 1, | |
316 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
317 | }, { | |
318 | .desc = "Camera Focus", | |
319 | .type = EV_KEY, | |
320 | .code = KEY_CAMERA_FOCUS, | |
321 | .gpio = RX51_GPIO_CAMERA_FOCUS, | |
322 | .active_low = 1, | |
323 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
324 | }, { | |
325 | .desc = "Camera Capture", | |
326 | .type = EV_KEY, | |
327 | .code = KEY_CAMERA, | |
328 | .gpio = RX51_GPIO_CAMERA_CAPTURE, | |
329 | .active_low = 1, | |
330 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
331 | }, { | |
332 | .desc = "Lock Button", | |
333 | .type = EV_KEY, | |
334 | .code = KEY_SCREENLOCK, | |
335 | .gpio = RX51_GPIO_LOCK_BUTTON, | |
336 | .active_low = 1, | |
337 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
338 | }, { | |
339 | .desc = "Keypad Slide", | |
340 | .type = EV_SW, | |
341 | .code = SW_KEYPAD_SLIDE, | |
342 | .gpio = RX51_GPIO_KEYPAD_SLIDE, | |
343 | .active_low = 1, | |
344 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
345 | }, { | |
346 | .desc = "Proximity Sensor", | |
347 | .type = EV_SW, | |
348 | .code = SW_FRONT_PROXIMITY, | |
349 | .gpio = RX51_GPIO_PROXIMITY, | |
350 | .active_low = 0, | |
351 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
352 | } | |
353 | }; | |
354 | ||
355 | static struct gpio_keys_platform_data rx51_gpio_keys_data = { | |
356 | .buttons = rx51_gpio_keys, | |
357 | .nbuttons = ARRAY_SIZE(rx51_gpio_keys), | |
358 | }; | |
359 | ||
360 | static struct platform_device rx51_gpio_keys_device = { | |
361 | .name = "gpio-keys", | |
362 | .id = -1, | |
363 | .dev = { | |
364 | .platform_data = &rx51_gpio_keys_data, | |
365 | }, | |
366 | }; | |
367 | ||
368 | static void __init rx51_add_gpio_keys(void) | |
369 | { | |
370 | platform_device_register(&rx51_gpio_keys_device); | |
371 | } | |
372 | #else | |
373 | static void __init rx51_add_gpio_keys(void) | |
374 | { | |
375 | } | |
376 | #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ | |
377 | ||
bead4375 | 378 | static uint32_t board_keymap[] = { |
3fea6026 DT |
379 | /* |
380 | * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row | |
381 | * connected to the ground" matrix state. | |
382 | */ | |
ffe7f95b | 383 | KEY(0, 0, KEY_Q), |
acf442dc AK |
384 | KEY(0, 1, KEY_O), |
385 | KEY(0, 2, KEY_P), | |
386 | KEY(0, 3, KEY_COMMA), | |
387 | KEY(0, 4, KEY_BACKSPACE), | |
388 | KEY(0, 6, KEY_A), | |
389 | KEY(0, 7, KEY_S), | |
3fea6026 | 390 | |
acf442dc | 391 | KEY(1, 0, KEY_W), |
ffe7f95b | 392 | KEY(1, 1, KEY_D), |
acf442dc AK |
393 | KEY(1, 2, KEY_F), |
394 | KEY(1, 3, KEY_G), | |
395 | KEY(1, 4, KEY_H), | |
396 | KEY(1, 5, KEY_J), | |
397 | KEY(1, 6, KEY_K), | |
398 | KEY(1, 7, KEY_L), | |
3fea6026 | 399 | |
acf442dc AK |
400 | KEY(2, 0, KEY_E), |
401 | KEY(2, 1, KEY_DOT), | |
ffe7f95b | 402 | KEY(2, 2, KEY_UP), |
acf442dc AK |
403 | KEY(2, 3, KEY_ENTER), |
404 | KEY(2, 5, KEY_Z), | |
405 | KEY(2, 6, KEY_X), | |
406 | KEY(2, 7, KEY_C), | |
3fea6026 DT |
407 | KEY(2, 8, KEY_F9), |
408 | ||
acf442dc AK |
409 | KEY(3, 0, KEY_R), |
410 | KEY(3, 1, KEY_V), | |
411 | KEY(3, 2, KEY_B), | |
ffe7f95b | 412 | KEY(3, 3, KEY_N), |
acf442dc AK |
413 | KEY(3, 4, KEY_M), |
414 | KEY(3, 5, KEY_SPACE), | |
415 | KEY(3, 6, KEY_SPACE), | |
416 | KEY(3, 7, KEY_LEFT), | |
3fea6026 | 417 | |
acf442dc AK |
418 | KEY(4, 0, KEY_T), |
419 | KEY(4, 1, KEY_DOWN), | |
420 | KEY(4, 2, KEY_RIGHT), | |
ffe7f95b | 421 | KEY(4, 4, KEY_LEFTCTRL), |
acf442dc AK |
422 | KEY(4, 5, KEY_RIGHTALT), |
423 | KEY(4, 6, KEY_LEFTSHIFT), | |
2e65a207 | 424 | KEY(4, 8, KEY_F10), |
3fea6026 | 425 | |
acf442dc | 426 | KEY(5, 0, KEY_Y), |
2e65a207 | 427 | KEY(5, 8, KEY_F11), |
3fea6026 | 428 | |
acf442dc | 429 | KEY(6, 0, KEY_U), |
3fea6026 | 430 | |
acf442dc AK |
431 | KEY(7, 0, KEY_I), |
432 | KEY(7, 1, KEY_F7), | |
433 | KEY(7, 2, KEY_F8), | |
ffe7f95b LL |
434 | }; |
435 | ||
4f543332 TL |
436 | static struct matrix_keymap_data board_map_data = { |
437 | .keymap = board_keymap, | |
438 | .keymap_size = ARRAY_SIZE(board_keymap), | |
439 | }; | |
440 | ||
ffe7f95b | 441 | static struct twl4030_keypad_data rx51_kp_data = { |
4f543332 | 442 | .keymap_data = &board_map_data, |
ffe7f95b LL |
443 | .rows = 8, |
444 | .cols = 8, | |
ffe7f95b LL |
445 | .rep = 1, |
446 | }; | |
447 | ||
ce6f0016 AH |
448 | /* Enable input logic and pull all lines up when eMMC is on. */ |
449 | static struct omap_board_mux rx51_mmc2_on_mux[] = { | |
450 | OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
451 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
452 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
453 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
454 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
455 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
456 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
457 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
458 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
459 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
460 | }; | |
461 | ||
462 | /* Disable input logic and pull all lines down when eMMC is off. */ | |
463 | static struct omap_board_mux rx51_mmc2_off_mux[] = { | |
464 | OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
465 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
466 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
467 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
468 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
469 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
470 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
471 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
472 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
473 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
474 | }; | |
475 | ||
112485e9 BC |
476 | static struct omap_mux_partition *partition; |
477 | ||
ce6f0016 AH |
478 | /* |
479 | * Current flows to eMMC when eMMC is off and the data lines are pulled up, | |
480 | * so pull them down. N.B. we pull 8 lines because we are using 8 lines. | |
481 | */ | |
482 | static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) | |
483 | { | |
484 | if (power_on) | |
112485e9 | 485 | omap_mux_write_array(partition, rx51_mmc2_on_mux); |
ce6f0016 | 486 | else |
112485e9 | 487 | omap_mux_write_array(partition, rx51_mmc2_off_mux); |
ce6f0016 AH |
488 | } |
489 | ||
68ff0423 | 490 | static struct omap2_hsmmc_info mmc[] __initdata = { |
ffe7f95b LL |
491 | { |
492 | .name = "external", | |
493 | .mmc = 1, | |
3a63833e | 494 | .caps = MMC_CAP_4_BIT_DATA, |
ffe7f95b LL |
495 | .cover_only = true, |
496 | .gpio_cd = 160, | |
497 | .gpio_wp = -EINVAL, | |
5e763d29 | 498 | .power_saving = true, |
ffe7f95b LL |
499 | }, |
500 | { | |
501 | .name = "internal", | |
502 | .mmc = 2, | |
3a63833e SG |
503 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, |
504 | /* See also rx51_mmc2_remux */ | |
ffe7f95b LL |
505 | .gpio_cd = -EINVAL, |
506 | .gpio_wp = -EINVAL, | |
5e763d29 AH |
507 | .nonremovable = true, |
508 | .power_saving = true, | |
ce6f0016 | 509 | .remux = rx51_mmc2_remux, |
ffe7f95b LL |
510 | }, |
511 | {} /* Terminator */ | |
512 | }; | |
513 | ||
786b01a8 OD |
514 | static struct regulator_consumer_supply rx51_vmmc1_supply[] = { |
515 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), | |
516 | }; | |
ffe7f95b | 517 | |
664a41b8 LT |
518 | static struct regulator_consumer_supply rx51_vaux2_supply[] = { |
519 | REGULATOR_SUPPLY("vdds_csib", "omap3isp"), | |
520 | }; | |
75ccf268 | 521 | |
786b01a8 OD |
522 | static struct regulator_consumer_supply rx51_vaux3_supply[] = { |
523 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), | |
524 | }; | |
ffe7f95b | 525 | |
786b01a8 OD |
526 | static struct regulator_consumer_supply rx51_vsim_supply[] = { |
527 | REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), | |
528 | }; | |
ffe7f95b | 529 | |
4cfcaef1 JN |
530 | static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { |
531 | /* tlv320aic3x analog supplies */ | |
5c7d9bbe JN |
532 | REGULATOR_SUPPLY("AVDD", "2-0018"), |
533 | REGULATOR_SUPPLY("DRVDD", "2-0018"), | |
caeeb4aa JN |
534 | REGULATOR_SUPPLY("AVDD", "2-0019"), |
535 | REGULATOR_SUPPLY("DRVDD", "2-0019"), | |
64d06691 JN |
536 | /* tpa6130a2 */ |
537 | REGULATOR_SUPPLY("Vdd", "2-0060"), | |
4cfcaef1 | 538 | /* Keep vmmc as last item. It is not iterated for newer boards */ |
0005ae73 | 539 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), |
4cfcaef1 JN |
540 | }; |
541 | ||
542 | static struct regulator_consumer_supply rx51_vio_supplies[] = { | |
543 | /* tlv320aic3x digital supplies */ | |
5c7d9bbe JN |
544 | REGULATOR_SUPPLY("IOVDD", "2-0018"), |
545 | REGULATOR_SUPPLY("DVDD", "2-0018"), | |
caeeb4aa JN |
546 | REGULATOR_SUPPLY("IOVDD", "2-0019"), |
547 | REGULATOR_SUPPLY("DVDD", "2-0019"), | |
589541c0 JN |
548 | /* Si4713 IO supply */ |
549 | REGULATOR_SUPPLY("vio", "2-0063"), | |
4cfcaef1 JN |
550 | }; |
551 | ||
0581b52e | 552 | static struct regulator_consumer_supply rx51_vaux1_consumers[] = { |
b5b9945b | 553 | REGULATOR_SUPPLY("vdds_sdi", "omapdss"), |
589541c0 JN |
554 | /* Si4713 supply */ |
555 | REGULATOR_SUPPLY("vdd", "2-0063"), | |
0581b52e RQ |
556 | }; |
557 | ||
ffe7f95b LL |
558 | static struct regulator_init_data rx51_vaux1 = { |
559 | .constraints = { | |
560 | .name = "V28", | |
561 | .min_uV = 2800000, | |
562 | .max_uV = 2800000, | |
000d534e | 563 | .always_on = true, /* due battery cover sensor */ |
ffe7f95b LL |
564 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
565 | | REGULATOR_MODE_STANDBY, | |
566 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
567 | | REGULATOR_CHANGE_STATUS, | |
568 | }, | |
0581b52e RQ |
569 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), |
570 | .consumer_supplies = rx51_vaux1_consumers, | |
ffe7f95b LL |
571 | }; |
572 | ||
573 | static struct regulator_init_data rx51_vaux2 = { | |
574 | .constraints = { | |
575 | .name = "VCSI", | |
576 | .min_uV = 1800000, | |
577 | .max_uV = 1800000, | |
578 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
579 | | REGULATOR_MODE_STANDBY, | |
580 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
581 | | REGULATOR_CHANGE_STATUS, | |
582 | }, | |
664a41b8 LT |
583 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), |
584 | .consumer_supplies = rx51_vaux2_supply, | |
ffe7f95b LL |
585 | }; |
586 | ||
587 | /* VAUX3 - adds more power to VIO_18 rail */ | |
f52eeee8 | 588 | static struct regulator_init_data rx51_vaux3_cam = { |
ffe7f95b LL |
589 | .constraints = { |
590 | .name = "VCAM_DIG_18", | |
591 | .min_uV = 1800000, | |
592 | .max_uV = 1800000, | |
593 | .apply_uV = true, | |
594 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
595 | | REGULATOR_MODE_STANDBY, | |
596 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
597 | | REGULATOR_CHANGE_STATUS, | |
598 | }, | |
599 | }; | |
600 | ||
f52eeee8 AH |
601 | static struct regulator_init_data rx51_vaux3_mmc = { |
602 | .constraints = { | |
603 | .name = "VMMC2_30", | |
604 | .min_uV = 2800000, | |
605 | .max_uV = 3000000, | |
606 | .apply_uV = true, | |
607 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
608 | | REGULATOR_MODE_STANDBY, | |
609 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
610 | | REGULATOR_CHANGE_MODE | |
611 | | REGULATOR_CHANGE_STATUS, | |
612 | }, | |
786b01a8 OD |
613 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), |
614 | .consumer_supplies = rx51_vaux3_supply, | |
f52eeee8 AH |
615 | }; |
616 | ||
ffe7f95b LL |
617 | static struct regulator_init_data rx51_vaux4 = { |
618 | .constraints = { | |
619 | .name = "VCAM_ANA_28", | |
620 | .min_uV = 2800000, | |
621 | .max_uV = 2800000, | |
622 | .apply_uV = true, | |
623 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
624 | | REGULATOR_MODE_STANDBY, | |
625 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
626 | | REGULATOR_CHANGE_STATUS, | |
627 | }, | |
628 | }; | |
629 | ||
630 | static struct regulator_init_data rx51_vmmc1 = { | |
631 | .constraints = { | |
632 | .min_uV = 1850000, | |
633 | .max_uV = 3150000, | |
634 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
635 | | REGULATOR_MODE_STANDBY, | |
636 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
637 | | REGULATOR_CHANGE_MODE | |
638 | | REGULATOR_CHANGE_STATUS, | |
639 | }, | |
786b01a8 OD |
640 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), |
641 | .consumer_supplies = rx51_vmmc1_supply, | |
ffe7f95b LL |
642 | }; |
643 | ||
644 | static struct regulator_init_data rx51_vmmc2 = { | |
645 | .constraints = { | |
f2add1de JN |
646 | .name = "V28_A", |
647 | .min_uV = 2800000, | |
648 | .max_uV = 3000000, | |
2827411e | 649 | .always_on = true, /* due VIO leak to AIC34 VDDs */ |
ffe7f95b LL |
650 | .apply_uV = true, |
651 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
652 | | REGULATOR_MODE_STANDBY, | |
653 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
654 | | REGULATOR_CHANGE_MODE | |
655 | | REGULATOR_CHANGE_STATUS, | |
656 | }, | |
4cfcaef1 JN |
657 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), |
658 | .consumer_supplies = rx51_vmmc2_supplies, | |
ffe7f95b LL |
659 | }; |
660 | ||
094fc559 KJ |
661 | static struct regulator_init_data rx51_vpll1 = { |
662 | .constraints = { | |
663 | .name = "VPLL", | |
664 | .min_uV = 1800000, | |
665 | .max_uV = 1800000, | |
666 | .apply_uV = true, | |
667 | .always_on = true, | |
668 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
669 | | REGULATOR_MODE_STANDBY, | |
670 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
671 | }, | |
672 | }; | |
673 | ||
674 | static struct regulator_init_data rx51_vpll2 = { | |
675 | .constraints = { | |
676 | .name = "VSDI_CSI", | |
677 | .min_uV = 1800000, | |
678 | .max_uV = 1800000, | |
679 | .apply_uV = true, | |
680 | .always_on = true, | |
681 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
682 | | REGULATOR_MODE_STANDBY, | |
683 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
684 | }, | |
685 | }; | |
686 | ||
ffe7f95b LL |
687 | static struct regulator_init_data rx51_vsim = { |
688 | .constraints = { | |
689 | .name = "VMMC2_IO_18", | |
690 | .min_uV = 1800000, | |
691 | .max_uV = 1800000, | |
692 | .apply_uV = true, | |
693 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
694 | | REGULATOR_MODE_STANDBY, | |
695 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
696 | | REGULATOR_CHANGE_STATUS, | |
697 | }, | |
786b01a8 OD |
698 | .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), |
699 | .consumer_supplies = rx51_vsim_supply, | |
ffe7f95b LL |
700 | }; |
701 | ||
4cfcaef1 JN |
702 | static struct regulator_init_data rx51_vio = { |
703 | .constraints = { | |
704 | .min_uV = 1800000, | |
705 | .max_uV = 1800000, | |
706 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
707 | | REGULATOR_MODE_STANDBY, | |
708 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
709 | | REGULATOR_CHANGE_MODE | |
710 | | REGULATOR_CHANGE_STATUS, | |
711 | }, | |
712 | .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), | |
713 | .consumer_supplies = rx51_vio_supplies, | |
714 | }; | |
715 | ||
094fc559 KJ |
716 | static struct regulator_init_data rx51_vintana1 = { |
717 | .constraints = { | |
718 | .name = "VINTANA1", | |
719 | .min_uV = 1500000, | |
720 | .max_uV = 1500000, | |
721 | .always_on = true, | |
722 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
723 | | REGULATOR_MODE_STANDBY, | |
724 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
725 | }, | |
726 | }; | |
727 | ||
728 | static struct regulator_init_data rx51_vintana2 = { | |
729 | .constraints = { | |
730 | .name = "VINTANA2", | |
731 | .min_uV = 2750000, | |
732 | .max_uV = 2750000, | |
733 | .apply_uV = true, | |
734 | .always_on = true, | |
735 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
736 | | REGULATOR_MODE_STANDBY, | |
737 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
738 | }, | |
739 | }; | |
740 | ||
741 | static struct regulator_init_data rx51_vintdig = { | |
742 | .constraints = { | |
743 | .name = "VINTDIG", | |
744 | .min_uV = 1500000, | |
745 | .max_uV = 1500000, | |
746 | .always_on = true, | |
747 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
748 | | REGULATOR_MODE_STANDBY, | |
749 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
750 | }, | |
751 | }; | |
752 | ||
589541c0 JN |
753 | static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { |
754 | .gpio_reset = RX51_FMTX_RESET_GPIO, | |
755 | }; | |
756 | ||
757 | static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { | |
758 | I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), | |
759 | .platform_data = &rx51_si4713_i2c_data, | |
760 | }; | |
761 | ||
762 | static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { | |
763 | .i2c_bus = 2, | |
764 | .subdev_board_info = &rx51_si4713_board_info, | |
765 | }; | |
766 | ||
12aee6c6 | 767 | static struct platform_device rx51_si4713_dev __initdata_or_module = { |
589541c0 JN |
768 | .name = "radio-si4713", |
769 | .id = -1, | |
770 | .dev = { | |
771 | .platform_data = &rx51_si4713_data, | |
772 | }, | |
773 | }; | |
774 | ||
775 | static __init void rx51_init_si4713(void) | |
776 | { | |
777 | int err; | |
778 | ||
779 | err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); | |
780 | if (err) { | |
781 | printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); | |
782 | return; | |
783 | } | |
784 | rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); | |
785 | platform_device_register(&rx51_si4713_dev); | |
786 | } | |
787 | ||
ffe7f95b LL |
788 | static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) |
789 | { | |
790 | /* FIXME this gpio setup is just a placeholder for now */ | |
bc593f5d | 791 | gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); |
c0ad4fac | 792 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); |
ffe7f95b | 793 | |
ffe7f95b LL |
794 | return 0; |
795 | } | |
796 | ||
797 | static struct twl4030_gpio_platform_data rx51_gpio_data = { | |
ffe7f95b LL |
798 | .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) |
799 | | BIT(4) | BIT(5) | |
800 | | BIT(8) | BIT(9) | BIT(10) | BIT(11) | |
801 | | BIT(12) | BIT(13) | BIT(14) | BIT(15) | |
802 | | BIT(16) | BIT(17) , | |
803 | .setup = rx51_twlgpio_setup, | |
804 | }; | |
805 | ||
9312fffb AK |
806 | static struct twl4030_ins sleep_on_seq[] __initdata = { |
807 | /* | |
3c684e84 | 808 | * Turn off everything |
9312fffb | 809 | */ |
3c684e84 | 810 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, |
9312fffb AK |
811 | }; |
812 | ||
813 | static struct twl4030_script sleep_on_script __initdata = { | |
814 | .script = sleep_on_seq, | |
815 | .size = ARRAY_SIZE(sleep_on_seq), | |
816 | .flags = TWL4030_SLEEP_SCRIPT, | |
817 | }; | |
818 | ||
819 | static struct twl4030_ins wakeup_seq[] __initdata = { | |
820 | /* | |
3c684e84 | 821 | * Reenable everything |
9312fffb | 822 | */ |
3c684e84 | 823 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
824 | }; |
825 | ||
826 | static struct twl4030_script wakeup_script __initdata = { | |
827 | .script = wakeup_seq, | |
828 | .size = ARRAY_SIZE(wakeup_seq), | |
829 | .flags = TWL4030_WAKEUP12_SCRIPT, | |
830 | }; | |
831 | ||
832 | static struct twl4030_ins wakeup_p3_seq[] __initdata = { | |
833 | /* | |
3c684e84 | 834 | * Reenable everything |
9312fffb | 835 | */ |
3c684e84 | 836 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
837 | }; |
838 | ||
839 | static struct twl4030_script wakeup_p3_script __initdata = { | |
840 | .script = wakeup_p3_seq, | |
841 | .size = ARRAY_SIZE(wakeup_p3_seq), | |
842 | .flags = TWL4030_WAKEUP3_SCRIPT, | |
843 | }; | |
844 | ||
845 | static struct twl4030_ins wrst_seq[] __initdata = { | |
846 | /* | |
847 | * Reset twl4030. | |
848 | * Reset VDD1 regulator. | |
849 | * Reset VDD2 regulator. | |
850 | * Reset VPLL1 regulator. | |
851 | * Enable sysclk output. | |
852 | * Reenable twl4030. | |
853 | */ | |
854 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, | |
855 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), | |
856 | 0x13}, | |
9312fffb AK |
857 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, |
858 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, | |
859 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, | |
860 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, | |
3c684e84 | 861 | {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
862 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, |
863 | }; | |
864 | ||
865 | static struct twl4030_script wrst_script __initdata = { | |
866 | .script = wrst_seq, | |
867 | .size = ARRAY_SIZE(wrst_seq), | |
868 | .flags = TWL4030_WRST_SCRIPT, | |
869 | }; | |
870 | ||
871 | static struct twl4030_script *twl4030_scripts[] __initdata = { | |
872 | /* wakeup12 script should be loaded before sleep script, otherwise a | |
873 | board might hit retention before loading of wakeup script is | |
874 | completed. This can cause boot failures depending on timing issues. | |
875 | */ | |
876 | &wakeup_script, | |
877 | &sleep_on_script, | |
878 | &wakeup_p3_script, | |
879 | &wrst_script, | |
880 | }; | |
881 | ||
882 | static struct twl4030_resconfig twl4030_rconfig[] __initdata = { | |
3c684e84 AK |
883 | { .resource = RES_VDD1, .devgroup = -1, |
884 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
885 | .remap_sleep = RES_STATE_OFF | |
886 | }, | |
887 | { .resource = RES_VDD2, .devgroup = -1, | |
888 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
889 | .remap_sleep = RES_STATE_OFF | |
890 | }, | |
891 | { .resource = RES_VPLL1, .devgroup = -1, | |
892 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
893 | .remap_sleep = RES_STATE_OFF | |
894 | }, | |
895 | { .resource = RES_VPLL2, .devgroup = -1, | |
896 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
897 | }, | |
898 | { .resource = RES_VAUX1, .devgroup = -1, | |
899 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
900 | }, | |
901 | { .resource = RES_VAUX2, .devgroup = -1, | |
902 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
903 | }, | |
904 | { .resource = RES_VAUX3, .devgroup = -1, | |
905 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
906 | }, | |
907 | { .resource = RES_VAUX4, .devgroup = -1, | |
908 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
909 | }, | |
910 | { .resource = RES_VMMC1, .devgroup = -1, | |
911 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
912 | }, | |
913 | { .resource = RES_VMMC2, .devgroup = -1, | |
914 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
915 | }, | |
916 | { .resource = RES_VDAC, .devgroup = -1, | |
917 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
918 | }, | |
919 | { .resource = RES_VSIM, .devgroup = -1, | |
920 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
921 | }, | |
922 | { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
923 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
924 | }, | |
925 | { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
926 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
927 | }, | |
928 | { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
929 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
930 | }, | |
931 | { .resource = RES_VIO, .devgroup = DEV_GRP_P3, | |
932 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
933 | }, | |
934 | { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
935 | .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 | |
936 | }, | |
937 | { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
938 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
939 | }, | |
940 | { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
941 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
942 | }, | |
943 | { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
944 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
945 | }, | |
946 | { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, | |
947 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
948 | }, | |
949 | { .resource = RES_32KCLKOUT, .devgroup = -1, | |
950 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
951 | }, | |
952 | { .resource = RES_RESET, .devgroup = -1, | |
953 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
954 | }, | |
d7ac829f | 955 | { .resource = RES_MAIN_REF, .devgroup = -1, |
3c684e84 AK |
956 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 |
957 | }, | |
9312fffb AK |
958 | { 0, 0}, |
959 | }; | |
960 | ||
961 | static struct twl4030_power_data rx51_t2scripts_data __initdata = { | |
962 | .scripts = twl4030_scripts, | |
963 | .num = ARRAY_SIZE(twl4030_scripts), | |
964 | .resource_config = twl4030_rconfig, | |
965 | }; | |
966 | ||
8c3d4534 | 967 | static struct twl4030_vibra_data rx51_vibra_data __initdata = { |
b7a834cc IK |
968 | .coexist = 0, |
969 | }; | |
970 | ||
8c3d4534 | 971 | static struct twl4030_audio_data rx51_audio_data __initdata = { |
b7a834cc IK |
972 | .audio_mclk = 26000000, |
973 | .vibra = &rx51_vibra_data, | |
974 | }; | |
9312fffb | 975 | |
9312fffb | 976 | static struct twl4030_platform_data rx51_twldata __initdata = { |
ffe7f95b LL |
977 | /* platform_data for children goes here */ |
978 | .gpio = &rx51_gpio_data, | |
979 | .keypad = &rx51_kp_data, | |
9312fffb | 980 | .power = &rx51_t2scripts_data, |
4ae6df5e | 981 | .audio = &rx51_audio_data, |
ffe7f95b LL |
982 | |
983 | .vaux1 = &rx51_vaux1, | |
984 | .vaux2 = &rx51_vaux2, | |
ffe7f95b LL |
985 | .vaux4 = &rx51_vaux4, |
986 | .vmmc1 = &rx51_vmmc1, | |
094fc559 KJ |
987 | .vpll1 = &rx51_vpll1, |
988 | .vpll2 = &rx51_vpll2, | |
ffe7f95b | 989 | .vsim = &rx51_vsim, |
094fc559 KJ |
990 | .vintana1 = &rx51_vintana1, |
991 | .vintana2 = &rx51_vintana2, | |
992 | .vintdig = &rx51_vintdig, | |
4cfcaef1 | 993 | .vio = &rx51_vio, |
ffe7f95b LL |
994 | }; |
995 | ||
f0c61d3d | 996 | static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { |
64d06691 JN |
997 | .power_gpio = 98, |
998 | }; | |
999 | ||
f0fba2ad LG |
1000 | /* Audio setup data */ |
1001 | static struct aic3x_setup_data rx51_aic34_setup = { | |
1002 | .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, | |
1003 | .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, | |
1004 | }; | |
1005 | ||
e4862f2f | 1006 | static struct aic3x_pdata rx51_aic3x_data = { |
f0fba2ad LG |
1007 | .setup = &rx51_aic34_setup, |
1008 | .gpio_reset = 60, | |
1009 | }; | |
1010 | ||
caeeb4aa JN |
1011 | static struct aic3x_pdata rx51_aic3x_data2 = { |
1012 | .gpio_reset = 60, | |
1013 | }; | |
1014 | ||
dabe929b JN |
1015 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { |
1016 | { | |
1017 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | |
87581fd4 | 1018 | .platform_data = &rx51_aic3x_data, |
dabe929b | 1019 | }, |
caeeb4aa JN |
1020 | { |
1021 | I2C_BOARD_INFO("tlv320aic3x", 0x19), | |
1022 | .platform_data = &rx51_aic3x_data2, | |
1023 | }, | |
70b5d737 MN |
1024 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
1025 | { | |
1026 | I2C_BOARD_INFO("tsl2563", 0x29), | |
1027 | .platform_data = &rx51_tsl2563_platform_data, | |
1028 | }, | |
eeada9e8 AP |
1029 | #endif |
1030 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) | |
1031 | { | |
1032 | I2C_BOARD_INFO("lp5523", 0x32), | |
1033 | .platform_data = &rx51_lp5523_platform_data, | |
1034 | }, | |
70b5d737 | 1035 | #endif |
d77711aa PR |
1036 | { |
1037 | I2C_BOARD_INFO("bq27200", 0x55), | |
1038 | }, | |
64d06691 JN |
1039 | { |
1040 | I2C_BOARD_INFO("tpa6130a2", 0x60), | |
1041 | .platform_data = &rx51_tpa6130a2_data, | |
1042 | } | |
dabe929b JN |
1043 | }; |
1044 | ||
3b511201 AP |
1045 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { |
1046 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) | |
1047 | { | |
1048 | I2C_BOARD_INFO("lis3lv02d", 0x1d), | |
1049 | .platform_data = &rx51_lis3lv02d_data, | |
3b511201 AP |
1050 | }, |
1051 | #endif | |
1052 | }; | |
1053 | ||
ffe7f95b LL |
1054 | static int __init rx51_i2c_init(void) |
1055 | { | |
f52eeee8 | 1056 | if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || |
4cfcaef1 | 1057 | system_rev >= SYSTEM_REV_B_USES_VAUX3) { |
f52eeee8 | 1058 | rx51_twldata.vaux3 = &rx51_vaux3_mmc; |
4cfcaef1 JN |
1059 | /* Only older boards use VMMC2 for internal MMC */ |
1060 | rx51_vmmc2.num_consumer_supplies--; | |
1061 | } else { | |
f52eeee8 | 1062 | rx51_twldata.vaux3 = &rx51_vaux3_cam; |
f52eeee8 | 1063 | } |
4cfcaef1 | 1064 | rx51_twldata.vmmc2 = &rx51_vmmc2; |
827ed9ae | 1065 | omap3_pmic_get_config(&rx51_twldata, |
b252b0ef PU |
1066 | TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, |
1067 | TWL_COMMON_REGULATOR_VDAC); | |
1068 | ||
1069 | rx51_twldata.vdac->constraints.apply_uV = true; | |
1070 | rx51_twldata.vdac->constraints.name = "VDAC"; | |
1071 | ||
7d7e1eba | 1072 | omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); |
dabe929b JN |
1073 | omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, |
1074 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); | |
4d04317f TL |
1075 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
1076 | rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); | |
1077 | rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); | |
1078 | #endif | |
3b511201 AP |
1079 | omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, |
1080 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); | |
ffe7f95b LL |
1081 | return 0; |
1082 | } | |
1083 | ||
aa62e90f JY |
1084 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ |
1085 | defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) | |
1086 | ||
1087 | static struct mtd_partition onenand_partitions[] = { | |
1088 | { | |
1089 | .name = "bootloader", | |
1090 | .offset = 0, | |
1091 | .size = 0x20000, | |
1092 | .mask_flags = MTD_WRITEABLE, /* Force read-only */ | |
1093 | }, | |
1094 | { | |
1095 | .name = "config", | |
1096 | .offset = MTDPART_OFS_APPEND, | |
1097 | .size = 0x60000, | |
1098 | }, | |
1099 | { | |
1100 | .name = "log", | |
1101 | .offset = MTDPART_OFS_APPEND, | |
1102 | .size = 0x40000, | |
1103 | }, | |
1104 | { | |
1105 | .name = "kernel", | |
1106 | .offset = MTDPART_OFS_APPEND, | |
1107 | .size = 0x200000, | |
1108 | }, | |
1109 | { | |
1110 | .name = "initfs", | |
1111 | .offset = MTDPART_OFS_APPEND, | |
1112 | .size = 0x200000, | |
1113 | }, | |
1114 | { | |
1115 | .name = "rootfs", | |
1116 | .offset = MTDPART_OFS_APPEND, | |
1117 | .size = MTDPART_SIZ_FULL, | |
1118 | }, | |
1119 | }; | |
1120 | ||
5403187f AK |
1121 | static struct omap_onenand_platform_data board_onenand_data[] = { |
1122 | { | |
1123 | .cs = 0, | |
1124 | .gpio_irq = 65, | |
1125 | .parts = onenand_partitions, | |
1126 | .nr_parts = ARRAY_SIZE(onenand_partitions), | |
1127 | .flags = ONENAND_SYNC_READWRITE, | |
1128 | } | |
aa62e90f | 1129 | }; |
aa62e90f | 1130 | #endif |
ffe7f95b | 1131 | |
1a48e157 TL |
1132 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) |
1133 | ||
1134 | static struct omap_smc91x_platform_data board_smc91x_data = { | |
1135 | .cs = 1, | |
1136 | .gpio_irq = 54, | |
1137 | .gpio_pwrdwn = 86, | |
1138 | .gpio_reset = 164, | |
1139 | .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, | |
1140 | }; | |
1141 | ||
1142 | static void __init board_smc91x_init(void) | |
1143 | { | |
4896e394 TL |
1144 | omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); |
1145 | omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); | |
1146 | omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); | |
1a48e157 TL |
1147 | |
1148 | gpmc_smc91x_init(&board_smc91x_data); | |
1149 | } | |
1150 | ||
1151 | #else | |
1152 | ||
1153 | static inline void board_smc91x_init(void) | |
1154 | { | |
1155 | } | |
1156 | ||
1157 | #endif | |
1158 | ||
a24e61a9 KV |
1159 | static void rx51_wl1251_set_power(bool enable) |
1160 | { | |
1161 | gpio_set_value(RX51_WL1251_POWER_GPIO, enable); | |
1162 | } | |
1163 | ||
bc593f5d IG |
1164 | static struct gpio rx51_wl1251_gpios[] __initdata = { |
1165 | { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, | |
1166 | { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, | |
1167 | }; | |
1168 | ||
a24e61a9 KV |
1169 | static void __init rx51_init_wl1251(void) |
1170 | { | |
1171 | int irq, ret; | |
1172 | ||
bc593f5d IG |
1173 | ret = gpio_request_array(rx51_wl1251_gpios, |
1174 | ARRAY_SIZE(rx51_wl1251_gpios)); | |
a24e61a9 KV |
1175 | if (ret < 0) |
1176 | goto error; | |
1177 | ||
a24e61a9 KV |
1178 | irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); |
1179 | if (irq < 0) | |
1180 | goto err_irq; | |
1181 | ||
1182 | wl1251_pdata.set_power = rx51_wl1251_set_power; | |
1183 | rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; | |
1184 | ||
1185 | return; | |
1186 | ||
1187 | err_irq: | |
1188 | gpio_free(RX51_WL1251_IRQ_GPIO); | |
a24e61a9 | 1189 | gpio_free(RX51_WL1251_POWER_GPIO); |
a24e61a9 KV |
1190 | error: |
1191 | printk(KERN_ERR "wl1251 board initialisation failed\n"); | |
1192 | wl1251_pdata.set_power = NULL; | |
1193 | ||
1194 | /* | |
1195 | * Now rx51_peripherals_spi_board_info[1].irq is zero and | |
1196 | * set_power is null, and wl1251_probe() will fail. | |
1197 | */ | |
1198 | } | |
1199 | ||
3dad5356 AK |
1200 | static struct tsc2005_platform_data tsc2005_pdata = { |
1201 | .ts_pressure_max = 2048, | |
1202 | .ts_pressure_fudge = 2, | |
1203 | .ts_x_max = 4096, | |
1204 | .ts_x_fudge = 4, | |
1205 | .ts_y_max = 4096, | |
1206 | .ts_y_fudge = 7, | |
1207 | .ts_x_plate_ohm = 280, | |
1208 | .esd_timeout_ms = 8000, | |
1209 | }; | |
1210 | ||
d4860ebe VZ |
1211 | static struct gpio rx51_tsc2005_gpios[] __initdata = { |
1212 | { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, | |
1213 | { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, | |
1214 | }; | |
1215 | ||
3dad5356 AK |
1216 | static void rx51_tsc2005_set_reset(bool enable) |
1217 | { | |
1218 | gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); | |
1219 | } | |
1220 | ||
1221 | static void __init rx51_init_tsc2005(void) | |
1222 | { | |
1223 | int r; | |
1224 | ||
d4860ebe VZ |
1225 | omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); |
1226 | omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); | |
3dad5356 | 1227 | |
d4860ebe VZ |
1228 | r = gpio_request_array(rx51_tsc2005_gpios, |
1229 | ARRAY_SIZE(rx51_tsc2005_gpios)); | |
1230 | if (r < 0) { | |
1231 | printk(KERN_ERR "tsc2005 board initialization failed\n"); | |
3dad5356 | 1232 | tsc2005_pdata.esd_timeout_ms = 0; |
d4860ebe | 1233 | return; |
3dad5356 | 1234 | } |
d4860ebe VZ |
1235 | |
1236 | tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; | |
2533c2cf TL |
1237 | rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = |
1238 | gpio_to_irq(RX51_TSC2005_IRQ_GPIO); | |
3dad5356 AK |
1239 | } |
1240 | ||
322c183c TK |
1241 | #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) |
1242 | static struct lirc_rx51_platform_data rx51_lirc_data = { | |
1243 | .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, | |
1244 | .pwm_timer = 9, /* Use GPT 9 for CIR */ | |
1245 | }; | |
1246 | ||
1247 | static struct platform_device rx51_lirc_device = { | |
1248 | .name = "lirc_rx51", | |
1249 | .id = -1, | |
1250 | .dev = { | |
1251 | .platform_data = &rx51_lirc_data, | |
1252 | }, | |
1253 | }; | |
1254 | ||
1255 | static void __init rx51_init_lirc(void) | |
1256 | { | |
1257 | platform_device_register(&rx51_lirc_device); | |
1258 | } | |
1259 | #else | |
1260 | static void __init rx51_init_lirc(void) | |
1261 | { | |
1262 | } | |
1263 | #endif | |
1264 | ||
749a34b3 PR |
1265 | static struct platform_device madc_hwmon = { |
1266 | .name = "twl4030_madc_hwmon", | |
1267 | .id = -1, | |
1268 | }; | |
1269 | ||
1270 | static void __init rx51_init_twl4030_hwmon(void) | |
1271 | { | |
1272 | platform_device_register(&madc_hwmon); | |
1273 | } | |
1274 | ||
ffe7f95b LL |
1275 | void __init rx51_peripherals_init(void) |
1276 | { | |
ffe7f95b | 1277 | rx51_i2c_init(); |
094fc559 | 1278 | regulator_has_full_constraints(); |
5403187f | 1279 | gpmc_onenand_init(board_onenand_data); |
1a48e157 | 1280 | board_smc91x_init(); |
f014ee32 | 1281 | rx51_add_gpio_keys(); |
a24e61a9 | 1282 | rx51_init_wl1251(); |
3dad5356 | 1283 | rx51_init_tsc2005(); |
589541c0 | 1284 | rx51_init_si4713(); |
322c183c | 1285 | rx51_init_lirc(); |
a24e61a9 KV |
1286 | spi_register_board_info(rx51_peripherals_spi_board_info, |
1287 | ARRAY_SIZE(rx51_peripherals_spi_board_info)); | |
112485e9 BC |
1288 | |
1289 | partition = omap_mux_get("core"); | |
1290 | if (partition) | |
3b972bf0 | 1291 | omap_hsmmc_init(mmc); |
112485e9 | 1292 | |
10299e2e | 1293 | rx51_charger_init(); |
749a34b3 | 1294 | rx51_init_twl4030_hwmon(); |
ffe7f95b LL |
1295 | } |
1296 |