Commit | Line | Data |
---|---|---|
ffe7f95b | 1 | /* |
9312fffb | 2 | * linux/arch/arm/mach-omap2/board-rx51-peripherals.c |
ffe7f95b LL |
3 | * |
4 | * Copyright (C) 2008-2009 Nokia | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/platform_device.h> | |
14 | #include <linux/input.h> | |
6135434a | 15 | #include <linux/input/matrix_keypad.h> |
ffe7f95b | 16 | #include <linux/spi/spi.h> |
c1f9a095 | 17 | #include <linux/wl12xx.h> |
3dad5356 | 18 | #include <linux/spi/tsc2005.h> |
ffe7f95b | 19 | #include <linux/i2c.h> |
ebeb53e1 | 20 | #include <linux/i2c/twl.h> |
ffe7f95b LL |
21 | #include <linux/clk.h> |
22 | #include <linux/delay.h> | |
23 | #include <linux/regulator/machine.h> | |
24 | #include <linux/gpio.h> | |
f014ee32 | 25 | #include <linux/gpio_keys.h> |
e639cd5b | 26 | #include <linux/omap-gpmc.h> |
5e763d29 | 27 | #include <linux/mmc/host.h> |
10299e2e | 28 | #include <linux/power/isp1704_charger.h> |
2203747c AB |
29 | #include <linux/platform_data/spi-omap2-mcspi.h> |
30 | #include <linux/platform_data/mtd-onenand-omap2.h> | |
31 | ||
9f97da78 | 32 | #include <asm/system_info.h> |
ffe7f95b | 33 | |
4e65331c | 34 | #include "common.h" |
45c3eb7d | 35 | #include <linux/omap-dma.h> |
ffe7f95b | 36 | |
0a6f98c9 | 37 | #include "board-rx51.h" |
04aeae77 | 38 | |
87581fd4 | 39 | #include <sound/tlv320aic3x.h> |
64d06691 | 40 | #include <sound/tpa6130a2-plat.h> |
589541c0 JN |
41 | #include <media/radio-si4713.h> |
42 | #include <media/si4713.h> | |
df4094d2 | 43 | #include <linux/platform_data/leds-lp55xx.h> |
87581fd4 | 44 | |
9c2251dd | 45 | #include <linux/platform_data/tsl2563.h> |
3b511201 | 46 | #include <linux/lis3lv02d.h> |
70b5d737 | 47 | |
2320dc6f TV |
48 | #include <video/omap-panel-data.h> |
49 | ||
322c183c TK |
50 | #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) |
51 | #include <media/ir-rx51.h> | |
52 | #endif | |
53 | ||
4896e394 | 54 | #include "mux.h" |
1d5aef49 | 55 | #include "omap-pm.h" |
d02a900b | 56 | #include "hsmmc.h" |
fbd8071c | 57 | #include "common-board-devices.h" |
d2065e2b PR |
58 | #include "soc.h" |
59 | #include "omap-secure.h" | |
ffe7f95b | 60 | |
f52eeee8 AH |
61 | #define SYSTEM_REV_B_USES_VAUX3 0x1699 |
62 | #define SYSTEM_REV_S_USES_VAUX3 0x8 | |
63 | ||
a24e61a9 KV |
64 | #define RX51_WL1251_POWER_GPIO 87 |
65 | #define RX51_WL1251_IRQ_GPIO 42 | |
589541c0 JN |
66 | #define RX51_FMTX_RESET_GPIO 163 |
67 | #define RX51_FMTX_IRQ 53 | |
eeada9e8 | 68 | #define RX51_LP5523_CHIP_EN_GPIO 41 |
a24e61a9 | 69 | |
10299e2e KJ |
70 | #define RX51_USB_TRANSCEIVER_RST_GPIO 67 |
71 | ||
3dad5356 AK |
72 | #define RX51_TSC2005_RESET_GPIO 104 |
73 | #define RX51_TSC2005_IRQ_GPIO 100 | |
74 | ||
3b511201 AP |
75 | #define LIS302_IRQ1_GPIO 181 |
76 | #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ | |
77 | ||
e65f131a | 78 | /* List all SPI devices here. Note that the list/probe order seems to matter! */ |
a24e61a9 KV |
79 | enum { |
80 | RX51_SPI_WL1251, | |
6996e7ff | 81 | RX51_SPI_TSC2005, /* Touch Controller */ |
e65f131a | 82 | RX51_SPI_MIPID, /* LCD panel */ |
a24e61a9 KV |
83 | }; |
84 | ||
946651cb | 85 | static struct wl1251_platform_data wl1251_pdata; |
3dad5356 | 86 | static struct tsc2005_platform_data tsc2005_pdata; |
a24e61a9 | 87 | |
3b511201 AP |
88 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
89 | static int lis302_setup(void) | |
90 | { | |
91 | int err; | |
92 | int irq1 = LIS302_IRQ1_GPIO; | |
93 | int irq2 = LIS302_IRQ2_GPIO; | |
94 | ||
95 | /* gpio for interrupt pin 1 */ | |
96 | err = gpio_request(irq1, "lis3lv02dl_irq1"); | |
97 | if (err) { | |
98 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
99 | goto out; | |
100 | } | |
101 | ||
102 | /* gpio for interrupt pin 2 */ | |
103 | err = gpio_request(irq2, "lis3lv02dl_irq2"); | |
104 | if (err) { | |
105 | gpio_free(irq1); | |
106 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
107 | goto out; | |
108 | } | |
109 | ||
110 | gpio_direction_input(irq1); | |
111 | gpio_direction_input(irq2); | |
112 | ||
113 | out: | |
114 | return err; | |
115 | } | |
116 | ||
117 | static int lis302_release(void) | |
118 | { | |
119 | gpio_free(LIS302_IRQ1_GPIO); | |
120 | gpio_free(LIS302_IRQ2_GPIO); | |
121 | ||
122 | return 0; | |
123 | } | |
124 | ||
125 | static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { | |
126 | .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | | |
127 | LIS3_CLICK_SINGLE_Z, | |
128 | /* Limits are 0.5g * value */ | |
129 | .click_thresh_x = 8, | |
130 | .click_thresh_y = 8, | |
131 | .click_thresh_z = 10, | |
132 | /* Click must be longer than time limit */ | |
133 | .click_time_limit = 9, | |
134 | /* Kind of debounce filter */ | |
135 | .click_latency = 50, | |
136 | ||
137 | /* Limits for all axis. millig-value / 18 to get HW values */ | |
138 | .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, | |
139 | .wakeup_thresh = 800 / 18, | |
140 | .wakeup_flags2 = LIS3_WAKEUP_Z_HI , | |
141 | .wakeup_thresh2 = 900 / 18, | |
142 | ||
143 | .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, | |
144 | ||
145 | /* Interrupt line 2 for click detection, line 1 for thresholds */ | |
146 | .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, | |
147 | ||
148 | .axis_x = LIS3_DEV_X, | |
149 | .axis_y = LIS3_INV_DEV_Y, | |
150 | .axis_z = LIS3_INV_DEV_Z, | |
151 | .setup_resources = lis302_setup, | |
152 | .release_resources = lis302_release, | |
153 | .st_min_limits = {-32, 3, 3}, | |
154 | .st_max_limits = {-3, 32, 32}, | |
3b511201 AP |
155 | }; |
156 | #endif | |
157 | ||
70b5d737 MN |
158 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
159 | static struct tsl2563_platform_data rx51_tsl2563_platform_data = { | |
160 | .cover_comp_gain = 16, | |
161 | }; | |
162 | #endif | |
163 | ||
eeada9e8 | 164 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) |
df4094d2 | 165 | static struct lp55xx_led_config rx51_lp5523_led_config[] = { |
eeada9e8 | 166 | { |
1e7bf5e3 | 167 | .name = "lp5523:kb1", |
eeada9e8 AP |
168 | .chan_nr = 0, |
169 | .led_current = 50, | |
d1f1ca36 | 170 | .max_current = 100, |
eeada9e8 | 171 | }, { |
1e7bf5e3 | 172 | .name = "lp5523:kb2", |
eeada9e8 AP |
173 | .chan_nr = 1, |
174 | .led_current = 50, | |
d1f1ca36 | 175 | .max_current = 100, |
eeada9e8 | 176 | }, { |
1e7bf5e3 | 177 | .name = "lp5523:kb3", |
eeada9e8 AP |
178 | .chan_nr = 2, |
179 | .led_current = 50, | |
d1f1ca36 | 180 | .max_current = 100, |
eeada9e8 | 181 | }, { |
1e7bf5e3 | 182 | .name = "lp5523:kb4", |
eeada9e8 AP |
183 | .chan_nr = 3, |
184 | .led_current = 50, | |
d1f1ca36 | 185 | .max_current = 100, |
eeada9e8 | 186 | }, { |
1e7bf5e3 | 187 | .name = "lp5523:b", |
eeada9e8 AP |
188 | .chan_nr = 4, |
189 | .led_current = 50, | |
d1f1ca36 | 190 | .max_current = 100, |
eeada9e8 | 191 | }, { |
1e7bf5e3 | 192 | .name = "lp5523:g", |
eeada9e8 AP |
193 | .chan_nr = 5, |
194 | .led_current = 50, | |
d1f1ca36 | 195 | .max_current = 100, |
eeada9e8 | 196 | }, { |
1e7bf5e3 | 197 | .name = "lp5523:r", |
eeada9e8 AP |
198 | .chan_nr = 6, |
199 | .led_current = 50, | |
d1f1ca36 | 200 | .max_current = 100, |
eeada9e8 | 201 | }, { |
1e7bf5e3 | 202 | .name = "lp5523:kb5", |
eeada9e8 AP |
203 | .chan_nr = 7, |
204 | .led_current = 50, | |
d1f1ca36 | 205 | .max_current = 100, |
eeada9e8 | 206 | }, { |
1e7bf5e3 | 207 | .name = "lp5523:kb6", |
eeada9e8 AP |
208 | .chan_nr = 8, |
209 | .led_current = 50, | |
d1f1ca36 | 210 | .max_current = 100, |
eeada9e8 AP |
211 | } |
212 | }; | |
213 | ||
df4094d2 | 214 | static struct lp55xx_platform_data rx51_lp5523_platform_data = { |
eeada9e8 AP |
215 | .led_config = rx51_lp5523_led_config, |
216 | .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), | |
df4094d2 | 217 | .clock_mode = LP55XX_CLOCK_AUTO, |
30dae2f9 | 218 | .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, |
eeada9e8 AP |
219 | }; |
220 | #endif | |
221 | ||
2320dc6f TV |
222 | #define RX51_LCD_RESET_GPIO 90 |
223 | ||
224 | static struct panel_acx565akm_platform_data acx_pdata = { | |
225 | .name = "lcd", | |
226 | .source = "sdi.0", | |
227 | .reset_gpio = RX51_LCD_RESET_GPIO, | |
228 | .datapairs = 2, | |
229 | }; | |
230 | ||
a24e61a9 KV |
231 | static struct omap2_mcspi_device_config wl1251_mcspi_config = { |
232 | .turbo_mode = 0, | |
a24e61a9 KV |
233 | }; |
234 | ||
03e11104 RQ |
235 | static struct omap2_mcspi_device_config mipid_mcspi_config = { |
236 | .turbo_mode = 0, | |
03e11104 RQ |
237 | }; |
238 | ||
6996e7ff RQ |
239 | static struct omap2_mcspi_device_config tsc2005_mcspi_config = { |
240 | .turbo_mode = 0, | |
6996e7ff RQ |
241 | }; |
242 | ||
a24e61a9 KV |
243 | static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { |
244 | [RX51_SPI_WL1251] = { | |
245 | .modalias = "wl1251", | |
246 | .bus_num = 4, | |
247 | .chip_select = 0, | |
248 | .max_speed_hz = 48000000, | |
860fc976 | 249 | .mode = SPI_MODE_3, |
a24e61a9 KV |
250 | .controller_data = &wl1251_mcspi_config, |
251 | .platform_data = &wl1251_pdata, | |
252 | }, | |
03e11104 RQ |
253 | [RX51_SPI_MIPID] = { |
254 | .modalias = "acx565akm", | |
255 | .bus_num = 1, | |
256 | .chip_select = 2, | |
257 | .max_speed_hz = 6000000, | |
258 | .controller_data = &mipid_mcspi_config, | |
2320dc6f | 259 | .platform_data = &acx_pdata, |
03e11104 | 260 | }, |
6996e7ff RQ |
261 | [RX51_SPI_TSC2005] = { |
262 | .modalias = "tsc2005", | |
263 | .bus_num = 1, | |
264 | .chip_select = 0, | |
6996e7ff RQ |
265 | .max_speed_hz = 6000000, |
266 | .controller_data = &tsc2005_mcspi_config, | |
3dad5356 | 267 | .platform_data = &tsc2005_pdata, |
6996e7ff | 268 | }, |
a24e61a9 KV |
269 | }; |
270 | ||
7605c0b0 PR |
271 | static struct platform_device rx51_battery_device = { |
272 | .name = "rx51-battery", | |
273 | .id = -1, | |
274 | }; | |
275 | ||
10299e2e KJ |
276 | static void rx51_charger_set_power(bool on) |
277 | { | |
278 | gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); | |
279 | } | |
280 | ||
281 | static struct isp1704_charger_data rx51_charger_data = { | |
282 | .set_power = rx51_charger_set_power, | |
283 | }; | |
284 | ||
fd0964c5 | 285 | static struct platform_device rx51_charger_device = { |
10299e2e KJ |
286 | .name = "isp1704_charger", |
287 | .dev = { | |
288 | .platform_data = &rx51_charger_data, | |
289 | }, | |
fd0964c5 HK |
290 | }; |
291 | ||
10299e2e KJ |
292 | static void __init rx51_charger_init(void) |
293 | { | |
294 | WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, | |
e5fe29c7 | 295 | GPIOF_OUT_INIT_HIGH, "isp1704_reset")); |
10299e2e | 296 | |
7605c0b0 | 297 | platform_device_register(&rx51_battery_device); |
10299e2e KJ |
298 | platform_device_register(&rx51_charger_device); |
299 | } | |
300 | ||
f014ee32 JN |
301 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
302 | ||
303 | #define RX51_GPIO_CAMERA_LENS_COVER 110 | |
304 | #define RX51_GPIO_CAMERA_FOCUS 68 | |
305 | #define RX51_GPIO_CAMERA_CAPTURE 69 | |
306 | #define RX51_GPIO_KEYPAD_SLIDE 71 | |
307 | #define RX51_GPIO_LOCK_BUTTON 113 | |
308 | #define RX51_GPIO_PROXIMITY 89 | |
309 | ||
310 | #define RX51_GPIO_DEBOUNCE_TIMEOUT 10 | |
311 | ||
312 | static struct gpio_keys_button rx51_gpio_keys[] = { | |
313 | { | |
314 | .desc = "Camera Lens Cover", | |
315 | .type = EV_SW, | |
316 | .code = SW_CAMERA_LENS_COVER, | |
317 | .gpio = RX51_GPIO_CAMERA_LENS_COVER, | |
318 | .active_low = 1, | |
319 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
320 | }, { | |
321 | .desc = "Camera Focus", | |
322 | .type = EV_KEY, | |
323 | .code = KEY_CAMERA_FOCUS, | |
324 | .gpio = RX51_GPIO_CAMERA_FOCUS, | |
325 | .active_low = 1, | |
326 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
327 | }, { | |
328 | .desc = "Camera Capture", | |
329 | .type = EV_KEY, | |
330 | .code = KEY_CAMERA, | |
331 | .gpio = RX51_GPIO_CAMERA_CAPTURE, | |
332 | .active_low = 1, | |
333 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
334 | }, { | |
335 | .desc = "Lock Button", | |
336 | .type = EV_KEY, | |
337 | .code = KEY_SCREENLOCK, | |
338 | .gpio = RX51_GPIO_LOCK_BUTTON, | |
339 | .active_low = 1, | |
340 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
341 | }, { | |
342 | .desc = "Keypad Slide", | |
343 | .type = EV_SW, | |
344 | .code = SW_KEYPAD_SLIDE, | |
345 | .gpio = RX51_GPIO_KEYPAD_SLIDE, | |
346 | .active_low = 1, | |
347 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
348 | }, { | |
349 | .desc = "Proximity Sensor", | |
350 | .type = EV_SW, | |
351 | .code = SW_FRONT_PROXIMITY, | |
352 | .gpio = RX51_GPIO_PROXIMITY, | |
353 | .active_low = 0, | |
354 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
355 | } | |
356 | }; | |
357 | ||
358 | static struct gpio_keys_platform_data rx51_gpio_keys_data = { | |
359 | .buttons = rx51_gpio_keys, | |
360 | .nbuttons = ARRAY_SIZE(rx51_gpio_keys), | |
361 | }; | |
362 | ||
363 | static struct platform_device rx51_gpio_keys_device = { | |
364 | .name = "gpio-keys", | |
365 | .id = -1, | |
366 | .dev = { | |
367 | .platform_data = &rx51_gpio_keys_data, | |
368 | }, | |
369 | }; | |
370 | ||
371 | static void __init rx51_add_gpio_keys(void) | |
372 | { | |
373 | platform_device_register(&rx51_gpio_keys_device); | |
374 | } | |
375 | #else | |
376 | static void __init rx51_add_gpio_keys(void) | |
377 | { | |
378 | } | |
379 | #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ | |
380 | ||
bead4375 | 381 | static uint32_t board_keymap[] = { |
3fea6026 DT |
382 | /* |
383 | * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row | |
384 | * connected to the ground" matrix state. | |
385 | */ | |
ffe7f95b | 386 | KEY(0, 0, KEY_Q), |
acf442dc AK |
387 | KEY(0, 1, KEY_O), |
388 | KEY(0, 2, KEY_P), | |
389 | KEY(0, 3, KEY_COMMA), | |
390 | KEY(0, 4, KEY_BACKSPACE), | |
391 | KEY(0, 6, KEY_A), | |
392 | KEY(0, 7, KEY_S), | |
3fea6026 | 393 | |
acf442dc | 394 | KEY(1, 0, KEY_W), |
ffe7f95b | 395 | KEY(1, 1, KEY_D), |
acf442dc AK |
396 | KEY(1, 2, KEY_F), |
397 | KEY(1, 3, KEY_G), | |
398 | KEY(1, 4, KEY_H), | |
399 | KEY(1, 5, KEY_J), | |
400 | KEY(1, 6, KEY_K), | |
401 | KEY(1, 7, KEY_L), | |
3fea6026 | 402 | |
acf442dc AK |
403 | KEY(2, 0, KEY_E), |
404 | KEY(2, 1, KEY_DOT), | |
ffe7f95b | 405 | KEY(2, 2, KEY_UP), |
acf442dc AK |
406 | KEY(2, 3, KEY_ENTER), |
407 | KEY(2, 5, KEY_Z), | |
408 | KEY(2, 6, KEY_X), | |
409 | KEY(2, 7, KEY_C), | |
3fea6026 DT |
410 | KEY(2, 8, KEY_F9), |
411 | ||
acf442dc AK |
412 | KEY(3, 0, KEY_R), |
413 | KEY(3, 1, KEY_V), | |
414 | KEY(3, 2, KEY_B), | |
ffe7f95b | 415 | KEY(3, 3, KEY_N), |
acf442dc AK |
416 | KEY(3, 4, KEY_M), |
417 | KEY(3, 5, KEY_SPACE), | |
418 | KEY(3, 6, KEY_SPACE), | |
419 | KEY(3, 7, KEY_LEFT), | |
3fea6026 | 420 | |
acf442dc AK |
421 | KEY(4, 0, KEY_T), |
422 | KEY(4, 1, KEY_DOWN), | |
423 | KEY(4, 2, KEY_RIGHT), | |
ffe7f95b | 424 | KEY(4, 4, KEY_LEFTCTRL), |
acf442dc AK |
425 | KEY(4, 5, KEY_RIGHTALT), |
426 | KEY(4, 6, KEY_LEFTSHIFT), | |
2e65a207 | 427 | KEY(4, 8, KEY_F10), |
3fea6026 | 428 | |
acf442dc | 429 | KEY(5, 0, KEY_Y), |
2e65a207 | 430 | KEY(5, 8, KEY_F11), |
3fea6026 | 431 | |
acf442dc | 432 | KEY(6, 0, KEY_U), |
3fea6026 | 433 | |
acf442dc AK |
434 | KEY(7, 0, KEY_I), |
435 | KEY(7, 1, KEY_F7), | |
436 | KEY(7, 2, KEY_F8), | |
ffe7f95b LL |
437 | }; |
438 | ||
4f543332 TL |
439 | static struct matrix_keymap_data board_map_data = { |
440 | .keymap = board_keymap, | |
441 | .keymap_size = ARRAY_SIZE(board_keymap), | |
442 | }; | |
443 | ||
ffe7f95b | 444 | static struct twl4030_keypad_data rx51_kp_data = { |
4f543332 | 445 | .keymap_data = &board_map_data, |
ffe7f95b LL |
446 | .rows = 8, |
447 | .cols = 8, | |
ffe7f95b LL |
448 | .rep = 1, |
449 | }; | |
450 | ||
ce6f0016 AH |
451 | /* Enable input logic and pull all lines up when eMMC is on. */ |
452 | static struct omap_board_mux rx51_mmc2_on_mux[] = { | |
453 | OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
454 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
455 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
456 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
457 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
458 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
459 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
460 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
461 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
462 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
463 | }; | |
464 | ||
465 | /* Disable input logic and pull all lines down when eMMC is off. */ | |
466 | static struct omap_board_mux rx51_mmc2_off_mux[] = { | |
467 | OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
468 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
469 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
470 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
471 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
472 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
473 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
474 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
475 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
476 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
477 | }; | |
478 | ||
112485e9 BC |
479 | static struct omap_mux_partition *partition; |
480 | ||
ce6f0016 AH |
481 | /* |
482 | * Current flows to eMMC when eMMC is off and the data lines are pulled up, | |
483 | * so pull them down. N.B. we pull 8 lines because we are using 8 lines. | |
484 | */ | |
485 | static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) | |
486 | { | |
487 | if (power_on) | |
112485e9 | 488 | omap_mux_write_array(partition, rx51_mmc2_on_mux); |
ce6f0016 | 489 | else |
112485e9 | 490 | omap_mux_write_array(partition, rx51_mmc2_off_mux); |
ce6f0016 AH |
491 | } |
492 | ||
68ff0423 | 493 | static struct omap2_hsmmc_info mmc[] __initdata = { |
ffe7f95b LL |
494 | { |
495 | .name = "external", | |
496 | .mmc = 1, | |
3a63833e | 497 | .caps = MMC_CAP_4_BIT_DATA, |
ffe7f95b LL |
498 | .cover_only = true, |
499 | .gpio_cd = 160, | |
500 | .gpio_wp = -EINVAL, | |
5e763d29 | 501 | .power_saving = true, |
ffe7f95b LL |
502 | }, |
503 | { | |
504 | .name = "internal", | |
505 | .mmc = 2, | |
3a63833e SG |
506 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, |
507 | /* See also rx51_mmc2_remux */ | |
ffe7f95b LL |
508 | .gpio_cd = -EINVAL, |
509 | .gpio_wp = -EINVAL, | |
5e763d29 AH |
510 | .nonremovable = true, |
511 | .power_saving = true, | |
ce6f0016 | 512 | .remux = rx51_mmc2_remux, |
ffe7f95b LL |
513 | }, |
514 | {} /* Terminator */ | |
515 | }; | |
516 | ||
786b01a8 OD |
517 | static struct regulator_consumer_supply rx51_vmmc1_supply[] = { |
518 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), | |
519 | }; | |
ffe7f95b | 520 | |
664a41b8 LT |
521 | static struct regulator_consumer_supply rx51_vaux2_supply[] = { |
522 | REGULATOR_SUPPLY("vdds_csib", "omap3isp"), | |
523 | }; | |
75ccf268 | 524 | |
786b01a8 OD |
525 | static struct regulator_consumer_supply rx51_vaux3_supply[] = { |
526 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), | |
527 | }; | |
ffe7f95b | 528 | |
786b01a8 OD |
529 | static struct regulator_consumer_supply rx51_vsim_supply[] = { |
530 | REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), | |
531 | }; | |
ffe7f95b | 532 | |
4cfcaef1 JN |
533 | static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { |
534 | /* tlv320aic3x analog supplies */ | |
5c7d9bbe JN |
535 | REGULATOR_SUPPLY("AVDD", "2-0018"), |
536 | REGULATOR_SUPPLY("DRVDD", "2-0018"), | |
caeeb4aa JN |
537 | REGULATOR_SUPPLY("AVDD", "2-0019"), |
538 | REGULATOR_SUPPLY("DRVDD", "2-0019"), | |
64d06691 JN |
539 | /* tpa6130a2 */ |
540 | REGULATOR_SUPPLY("Vdd", "2-0060"), | |
4cfcaef1 | 541 | /* Keep vmmc as last item. It is not iterated for newer boards */ |
0005ae73 | 542 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), |
4cfcaef1 JN |
543 | }; |
544 | ||
545 | static struct regulator_consumer_supply rx51_vio_supplies[] = { | |
546 | /* tlv320aic3x digital supplies */ | |
5c7d9bbe JN |
547 | REGULATOR_SUPPLY("IOVDD", "2-0018"), |
548 | REGULATOR_SUPPLY("DVDD", "2-0018"), | |
caeeb4aa JN |
549 | REGULATOR_SUPPLY("IOVDD", "2-0019"), |
550 | REGULATOR_SUPPLY("DVDD", "2-0019"), | |
589541c0 JN |
551 | /* Si4713 IO supply */ |
552 | REGULATOR_SUPPLY("vio", "2-0063"), | |
17fd8cdb AK |
553 | /* lis3lv02d */ |
554 | REGULATOR_SUPPLY("Vdd_IO", "3-001d"), | |
4cfcaef1 JN |
555 | }; |
556 | ||
0581b52e | 557 | static struct regulator_consumer_supply rx51_vaux1_consumers[] = { |
b5b9945b | 558 | REGULATOR_SUPPLY("vdds_sdi", "omapdss"), |
3d85f548 | 559 | REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), |
589541c0 JN |
560 | /* Si4713 supply */ |
561 | REGULATOR_SUPPLY("vdd", "2-0063"), | |
17fd8cdb AK |
562 | /* lis3lv02d */ |
563 | REGULATOR_SUPPLY("Vdd", "3-001d"), | |
0581b52e RQ |
564 | }; |
565 | ||
ffe7f95b LL |
566 | static struct regulator_init_data rx51_vaux1 = { |
567 | .constraints = { | |
568 | .name = "V28", | |
569 | .min_uV = 2800000, | |
570 | .max_uV = 2800000, | |
000d534e | 571 | .always_on = true, /* due battery cover sensor */ |
ffe7f95b LL |
572 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
573 | | REGULATOR_MODE_STANDBY, | |
574 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
575 | | REGULATOR_CHANGE_STATUS, | |
576 | }, | |
0581b52e RQ |
577 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), |
578 | .consumer_supplies = rx51_vaux1_consumers, | |
ffe7f95b LL |
579 | }; |
580 | ||
581 | static struct regulator_init_data rx51_vaux2 = { | |
582 | .constraints = { | |
583 | .name = "VCSI", | |
584 | .min_uV = 1800000, | |
585 | .max_uV = 1800000, | |
586 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
587 | | REGULATOR_MODE_STANDBY, | |
588 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
589 | | REGULATOR_CHANGE_STATUS, | |
590 | }, | |
664a41b8 LT |
591 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), |
592 | .consumer_supplies = rx51_vaux2_supply, | |
ffe7f95b LL |
593 | }; |
594 | ||
595 | /* VAUX3 - adds more power to VIO_18 rail */ | |
f52eeee8 | 596 | static struct regulator_init_data rx51_vaux3_cam = { |
ffe7f95b LL |
597 | .constraints = { |
598 | .name = "VCAM_DIG_18", | |
599 | .min_uV = 1800000, | |
600 | .max_uV = 1800000, | |
601 | .apply_uV = true, | |
602 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
603 | | REGULATOR_MODE_STANDBY, | |
604 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
605 | | REGULATOR_CHANGE_STATUS, | |
606 | }, | |
607 | }; | |
608 | ||
f52eeee8 AH |
609 | static struct regulator_init_data rx51_vaux3_mmc = { |
610 | .constraints = { | |
611 | .name = "VMMC2_30", | |
612 | .min_uV = 2800000, | |
613 | .max_uV = 3000000, | |
614 | .apply_uV = true, | |
615 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
616 | | REGULATOR_MODE_STANDBY, | |
617 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
618 | | REGULATOR_CHANGE_MODE | |
619 | | REGULATOR_CHANGE_STATUS, | |
620 | }, | |
786b01a8 OD |
621 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), |
622 | .consumer_supplies = rx51_vaux3_supply, | |
f52eeee8 AH |
623 | }; |
624 | ||
ffe7f95b LL |
625 | static struct regulator_init_data rx51_vaux4 = { |
626 | .constraints = { | |
627 | .name = "VCAM_ANA_28", | |
628 | .min_uV = 2800000, | |
629 | .max_uV = 2800000, | |
630 | .apply_uV = true, | |
631 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
632 | | REGULATOR_MODE_STANDBY, | |
633 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
634 | | REGULATOR_CHANGE_STATUS, | |
635 | }, | |
636 | }; | |
637 | ||
638 | static struct regulator_init_data rx51_vmmc1 = { | |
639 | .constraints = { | |
640 | .min_uV = 1850000, | |
641 | .max_uV = 3150000, | |
642 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
643 | | REGULATOR_MODE_STANDBY, | |
644 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
645 | | REGULATOR_CHANGE_MODE | |
646 | | REGULATOR_CHANGE_STATUS, | |
647 | }, | |
786b01a8 OD |
648 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), |
649 | .consumer_supplies = rx51_vmmc1_supply, | |
ffe7f95b LL |
650 | }; |
651 | ||
652 | static struct regulator_init_data rx51_vmmc2 = { | |
653 | .constraints = { | |
f2add1de JN |
654 | .name = "V28_A", |
655 | .min_uV = 2800000, | |
656 | .max_uV = 3000000, | |
2827411e | 657 | .always_on = true, /* due VIO leak to AIC34 VDDs */ |
ffe7f95b LL |
658 | .apply_uV = true, |
659 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
660 | | REGULATOR_MODE_STANDBY, | |
661 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
662 | | REGULATOR_CHANGE_MODE | |
663 | | REGULATOR_CHANGE_STATUS, | |
664 | }, | |
4cfcaef1 JN |
665 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), |
666 | .consumer_supplies = rx51_vmmc2_supplies, | |
ffe7f95b LL |
667 | }; |
668 | ||
094fc559 KJ |
669 | static struct regulator_init_data rx51_vpll1 = { |
670 | .constraints = { | |
671 | .name = "VPLL", | |
672 | .min_uV = 1800000, | |
673 | .max_uV = 1800000, | |
674 | .apply_uV = true, | |
675 | .always_on = true, | |
676 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
677 | | REGULATOR_MODE_STANDBY, | |
678 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
679 | }, | |
680 | }; | |
681 | ||
682 | static struct regulator_init_data rx51_vpll2 = { | |
683 | .constraints = { | |
684 | .name = "VSDI_CSI", | |
685 | .min_uV = 1800000, | |
686 | .max_uV = 1800000, | |
687 | .apply_uV = true, | |
688 | .always_on = true, | |
689 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
690 | | REGULATOR_MODE_STANDBY, | |
691 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
692 | }, | |
693 | }; | |
694 | ||
ffe7f95b LL |
695 | static struct regulator_init_data rx51_vsim = { |
696 | .constraints = { | |
697 | .name = "VMMC2_IO_18", | |
698 | .min_uV = 1800000, | |
699 | .max_uV = 1800000, | |
700 | .apply_uV = true, | |
701 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
702 | | REGULATOR_MODE_STANDBY, | |
703 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
704 | | REGULATOR_CHANGE_STATUS, | |
705 | }, | |
786b01a8 OD |
706 | .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), |
707 | .consumer_supplies = rx51_vsim_supply, | |
ffe7f95b LL |
708 | }; |
709 | ||
4cfcaef1 JN |
710 | static struct regulator_init_data rx51_vio = { |
711 | .constraints = { | |
712 | .min_uV = 1800000, | |
713 | .max_uV = 1800000, | |
714 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
715 | | REGULATOR_MODE_STANDBY, | |
716 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
717 | | REGULATOR_CHANGE_MODE | |
718 | | REGULATOR_CHANGE_STATUS, | |
719 | }, | |
720 | .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), | |
721 | .consumer_supplies = rx51_vio_supplies, | |
722 | }; | |
723 | ||
094fc559 KJ |
724 | static struct regulator_init_data rx51_vintana1 = { |
725 | .constraints = { | |
726 | .name = "VINTANA1", | |
727 | .min_uV = 1500000, | |
728 | .max_uV = 1500000, | |
729 | .always_on = true, | |
730 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
731 | | REGULATOR_MODE_STANDBY, | |
732 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
733 | }, | |
734 | }; | |
735 | ||
736 | static struct regulator_init_data rx51_vintana2 = { | |
737 | .constraints = { | |
738 | .name = "VINTANA2", | |
739 | .min_uV = 2750000, | |
740 | .max_uV = 2750000, | |
741 | .apply_uV = true, | |
742 | .always_on = true, | |
743 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
744 | | REGULATOR_MODE_STANDBY, | |
745 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
746 | }, | |
747 | }; | |
748 | ||
749 | static struct regulator_init_data rx51_vintdig = { | |
750 | .constraints = { | |
751 | .name = "VINTDIG", | |
752 | .min_uV = 1500000, | |
753 | .max_uV = 1500000, | |
754 | .always_on = true, | |
755 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
756 | | REGULATOR_MODE_STANDBY, | |
757 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
758 | }, | |
759 | }; | |
760 | ||
cc6d618f DR |
761 | static const char * const si4713_supply_names[] = { |
762 | "vio", | |
763 | "vdd", | |
764 | }; | |
765 | ||
589541c0 | 766 | static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { |
cc6d618f DR |
767 | .supplies = ARRAY_SIZE(si4713_supply_names), |
768 | .supply_names = si4713_supply_names, | |
589541c0 JN |
769 | .gpio_reset = RX51_FMTX_RESET_GPIO, |
770 | }; | |
771 | ||
772 | static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { | |
773 | I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), | |
774 | .platform_data = &rx51_si4713_i2c_data, | |
775 | }; | |
776 | ||
777 | static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { | |
778 | .i2c_bus = 2, | |
779 | .subdev_board_info = &rx51_si4713_board_info, | |
780 | }; | |
781 | ||
12aee6c6 | 782 | static struct platform_device rx51_si4713_dev __initdata_or_module = { |
589541c0 JN |
783 | .name = "radio-si4713", |
784 | .id = -1, | |
785 | .dev = { | |
786 | .platform_data = &rx51_si4713_data, | |
787 | }, | |
788 | }; | |
789 | ||
790 | static __init void rx51_init_si4713(void) | |
791 | { | |
792 | int err; | |
793 | ||
794 | err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); | |
795 | if (err) { | |
796 | printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); | |
797 | return; | |
798 | } | |
799 | rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); | |
800 | platform_device_register(&rx51_si4713_dev); | |
801 | } | |
802 | ||
ffe7f95b LL |
803 | static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) |
804 | { | |
805 | /* FIXME this gpio setup is just a placeholder for now */ | |
bc593f5d | 806 | gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); |
c0ad4fac | 807 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); |
ffe7f95b | 808 | |
ffe7f95b LL |
809 | return 0; |
810 | } | |
811 | ||
812 | static struct twl4030_gpio_platform_data rx51_gpio_data = { | |
ffe7f95b LL |
813 | .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) |
814 | | BIT(4) | BIT(5) | |
815 | | BIT(8) | BIT(9) | BIT(10) | BIT(11) | |
816 | | BIT(12) | BIT(13) | BIT(14) | BIT(15) | |
817 | | BIT(16) | BIT(17) , | |
818 | .setup = rx51_twlgpio_setup, | |
819 | }; | |
820 | ||
9312fffb AK |
821 | static struct twl4030_ins sleep_on_seq[] __initdata = { |
822 | /* | |
3c684e84 | 823 | * Turn off everything |
9312fffb | 824 | */ |
3c684e84 | 825 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, |
9312fffb AK |
826 | }; |
827 | ||
828 | static struct twl4030_script sleep_on_script __initdata = { | |
829 | .script = sleep_on_seq, | |
830 | .size = ARRAY_SIZE(sleep_on_seq), | |
831 | .flags = TWL4030_SLEEP_SCRIPT, | |
832 | }; | |
833 | ||
834 | static struct twl4030_ins wakeup_seq[] __initdata = { | |
835 | /* | |
3c684e84 | 836 | * Reenable everything |
9312fffb | 837 | */ |
3c684e84 | 838 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
839 | }; |
840 | ||
841 | static struct twl4030_script wakeup_script __initdata = { | |
842 | .script = wakeup_seq, | |
843 | .size = ARRAY_SIZE(wakeup_seq), | |
844 | .flags = TWL4030_WAKEUP12_SCRIPT, | |
845 | }; | |
846 | ||
847 | static struct twl4030_ins wakeup_p3_seq[] __initdata = { | |
848 | /* | |
3c684e84 | 849 | * Reenable everything |
9312fffb | 850 | */ |
3c684e84 | 851 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
852 | }; |
853 | ||
854 | static struct twl4030_script wakeup_p3_script __initdata = { | |
855 | .script = wakeup_p3_seq, | |
856 | .size = ARRAY_SIZE(wakeup_p3_seq), | |
857 | .flags = TWL4030_WAKEUP3_SCRIPT, | |
858 | }; | |
859 | ||
860 | static struct twl4030_ins wrst_seq[] __initdata = { | |
861 | /* | |
862 | * Reset twl4030. | |
863 | * Reset VDD1 regulator. | |
864 | * Reset VDD2 regulator. | |
865 | * Reset VPLL1 regulator. | |
866 | * Enable sysclk output. | |
867 | * Reenable twl4030. | |
868 | */ | |
869 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, | |
870 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), | |
871 | 0x13}, | |
9312fffb AK |
872 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, |
873 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, | |
874 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, | |
875 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, | |
3c684e84 | 876 | {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
877 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, |
878 | }; | |
879 | ||
880 | static struct twl4030_script wrst_script __initdata = { | |
881 | .script = wrst_seq, | |
882 | .size = ARRAY_SIZE(wrst_seq), | |
883 | .flags = TWL4030_WRST_SCRIPT, | |
884 | }; | |
885 | ||
886 | static struct twl4030_script *twl4030_scripts[] __initdata = { | |
887 | /* wakeup12 script should be loaded before sleep script, otherwise a | |
888 | board might hit retention before loading of wakeup script is | |
889 | completed. This can cause boot failures depending on timing issues. | |
890 | */ | |
891 | &wakeup_script, | |
892 | &sleep_on_script, | |
893 | &wakeup_p3_script, | |
894 | &wrst_script, | |
895 | }; | |
896 | ||
897 | static struct twl4030_resconfig twl4030_rconfig[] __initdata = { | |
3c684e84 AK |
898 | { .resource = RES_VDD1, .devgroup = -1, |
899 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
900 | .remap_sleep = RES_STATE_OFF | |
901 | }, | |
902 | { .resource = RES_VDD2, .devgroup = -1, | |
903 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
904 | .remap_sleep = RES_STATE_OFF | |
905 | }, | |
906 | { .resource = RES_VPLL1, .devgroup = -1, | |
907 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
908 | .remap_sleep = RES_STATE_OFF | |
909 | }, | |
910 | { .resource = RES_VPLL2, .devgroup = -1, | |
911 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
912 | }, | |
913 | { .resource = RES_VAUX1, .devgroup = -1, | |
914 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
915 | }, | |
916 | { .resource = RES_VAUX2, .devgroup = -1, | |
917 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
918 | }, | |
919 | { .resource = RES_VAUX3, .devgroup = -1, | |
920 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
921 | }, | |
922 | { .resource = RES_VAUX4, .devgroup = -1, | |
923 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
924 | }, | |
925 | { .resource = RES_VMMC1, .devgroup = -1, | |
926 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
927 | }, | |
928 | { .resource = RES_VMMC2, .devgroup = -1, | |
929 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
930 | }, | |
931 | { .resource = RES_VDAC, .devgroup = -1, | |
932 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
933 | }, | |
934 | { .resource = RES_VSIM, .devgroup = -1, | |
935 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
936 | }, | |
937 | { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
938 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
939 | }, | |
940 | { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
941 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
942 | }, | |
943 | { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
944 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
945 | }, | |
946 | { .resource = RES_VIO, .devgroup = DEV_GRP_P3, | |
947 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
948 | }, | |
949 | { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
950 | .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 | |
951 | }, | |
952 | { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
953 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
954 | }, | |
955 | { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
956 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
957 | }, | |
958 | { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
959 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
960 | }, | |
961 | { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, | |
962 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
963 | }, | |
964 | { .resource = RES_32KCLKOUT, .devgroup = -1, | |
965 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
966 | }, | |
967 | { .resource = RES_RESET, .devgroup = -1, | |
968 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
969 | }, | |
d7ac829f | 970 | { .resource = RES_MAIN_REF, .devgroup = -1, |
3c684e84 AK |
971 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 |
972 | }, | |
9312fffb AK |
973 | { 0, 0}, |
974 | }; | |
975 | ||
976 | static struct twl4030_power_data rx51_t2scripts_data __initdata = { | |
977 | .scripts = twl4030_scripts, | |
978 | .num = ARRAY_SIZE(twl4030_scripts), | |
979 | .resource_config = twl4030_rconfig, | |
980 | }; | |
981 | ||
8c3d4534 | 982 | static struct twl4030_vibra_data rx51_vibra_data __initdata = { |
b7a834cc IK |
983 | .coexist = 0, |
984 | }; | |
985 | ||
8c3d4534 | 986 | static struct twl4030_audio_data rx51_audio_data __initdata = { |
b7a834cc IK |
987 | .audio_mclk = 26000000, |
988 | .vibra = &rx51_vibra_data, | |
989 | }; | |
9312fffb | 990 | |
9312fffb | 991 | static struct twl4030_platform_data rx51_twldata __initdata = { |
ffe7f95b LL |
992 | /* platform_data for children goes here */ |
993 | .gpio = &rx51_gpio_data, | |
994 | .keypad = &rx51_kp_data, | |
9312fffb | 995 | .power = &rx51_t2scripts_data, |
4ae6df5e | 996 | .audio = &rx51_audio_data, |
ffe7f95b LL |
997 | |
998 | .vaux1 = &rx51_vaux1, | |
999 | .vaux2 = &rx51_vaux2, | |
ffe7f95b LL |
1000 | .vaux4 = &rx51_vaux4, |
1001 | .vmmc1 = &rx51_vmmc1, | |
094fc559 KJ |
1002 | .vpll1 = &rx51_vpll1, |
1003 | .vpll2 = &rx51_vpll2, | |
ffe7f95b | 1004 | .vsim = &rx51_vsim, |
094fc559 KJ |
1005 | .vintana1 = &rx51_vintana1, |
1006 | .vintana2 = &rx51_vintana2, | |
1007 | .vintdig = &rx51_vintdig, | |
4cfcaef1 | 1008 | .vio = &rx51_vio, |
ffe7f95b LL |
1009 | }; |
1010 | ||
f0c61d3d | 1011 | static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { |
64d06691 JN |
1012 | .power_gpio = 98, |
1013 | }; | |
1014 | ||
f0fba2ad LG |
1015 | /* Audio setup data */ |
1016 | static struct aic3x_setup_data rx51_aic34_setup = { | |
1017 | .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, | |
1018 | .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, | |
1019 | }; | |
1020 | ||
e4862f2f | 1021 | static struct aic3x_pdata rx51_aic3x_data = { |
f0fba2ad LG |
1022 | .setup = &rx51_aic34_setup, |
1023 | .gpio_reset = 60, | |
1024 | }; | |
1025 | ||
caeeb4aa JN |
1026 | static struct aic3x_pdata rx51_aic3x_data2 = { |
1027 | .gpio_reset = 60, | |
1028 | }; | |
1029 | ||
dabe929b JN |
1030 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { |
1031 | { | |
1032 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | |
87581fd4 | 1033 | .platform_data = &rx51_aic3x_data, |
dabe929b | 1034 | }, |
caeeb4aa JN |
1035 | { |
1036 | I2C_BOARD_INFO("tlv320aic3x", 0x19), | |
1037 | .platform_data = &rx51_aic3x_data2, | |
1038 | }, | |
70b5d737 MN |
1039 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
1040 | { | |
1041 | I2C_BOARD_INFO("tsl2563", 0x29), | |
1042 | .platform_data = &rx51_tsl2563_platform_data, | |
1043 | }, | |
eeada9e8 AP |
1044 | #endif |
1045 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) | |
1046 | { | |
1047 | I2C_BOARD_INFO("lp5523", 0x32), | |
1048 | .platform_data = &rx51_lp5523_platform_data, | |
1049 | }, | |
70b5d737 | 1050 | #endif |
d77711aa PR |
1051 | { |
1052 | I2C_BOARD_INFO("bq27200", 0x55), | |
1053 | }, | |
64d06691 JN |
1054 | { |
1055 | I2C_BOARD_INFO("tpa6130a2", 0x60), | |
1056 | .platform_data = &rx51_tpa6130a2_data, | |
1057 | } | |
dabe929b JN |
1058 | }; |
1059 | ||
3b511201 AP |
1060 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { |
1061 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) | |
1062 | { | |
1063 | I2C_BOARD_INFO("lis3lv02d", 0x1d), | |
1064 | .platform_data = &rx51_lis3lv02d_data, | |
3b511201 AP |
1065 | }, |
1066 | #endif | |
1067 | }; | |
1068 | ||
ffe7f95b LL |
1069 | static int __init rx51_i2c_init(void) |
1070 | { | |
f52eeee8 | 1071 | if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || |
4cfcaef1 | 1072 | system_rev >= SYSTEM_REV_B_USES_VAUX3) { |
f52eeee8 | 1073 | rx51_twldata.vaux3 = &rx51_vaux3_mmc; |
4cfcaef1 JN |
1074 | /* Only older boards use VMMC2 for internal MMC */ |
1075 | rx51_vmmc2.num_consumer_supplies--; | |
1076 | } else { | |
f52eeee8 | 1077 | rx51_twldata.vaux3 = &rx51_vaux3_cam; |
f52eeee8 | 1078 | } |
4cfcaef1 | 1079 | rx51_twldata.vmmc2 = &rx51_vmmc2; |
827ed9ae | 1080 | omap3_pmic_get_config(&rx51_twldata, |
b252b0ef PU |
1081 | TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, |
1082 | TWL_COMMON_REGULATOR_VDAC); | |
1083 | ||
1084 | rx51_twldata.vdac->constraints.apply_uV = true; | |
1085 | rx51_twldata.vdac->constraints.name = "VDAC"; | |
1086 | ||
7d7e1eba | 1087 | omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); |
dabe929b JN |
1088 | omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, |
1089 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); | |
4d04317f TL |
1090 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
1091 | rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); | |
1092 | rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); | |
1093 | #endif | |
3b511201 AP |
1094 | omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, |
1095 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); | |
ffe7f95b LL |
1096 | return 0; |
1097 | } | |
1098 | ||
aa62e90f JY |
1099 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ |
1100 | defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) | |
1101 | ||
1102 | static struct mtd_partition onenand_partitions[] = { | |
1103 | { | |
1104 | .name = "bootloader", | |
1105 | .offset = 0, | |
1106 | .size = 0x20000, | |
1107 | .mask_flags = MTD_WRITEABLE, /* Force read-only */ | |
1108 | }, | |
1109 | { | |
1110 | .name = "config", | |
1111 | .offset = MTDPART_OFS_APPEND, | |
1112 | .size = 0x60000, | |
1113 | }, | |
1114 | { | |
1115 | .name = "log", | |
1116 | .offset = MTDPART_OFS_APPEND, | |
1117 | .size = 0x40000, | |
1118 | }, | |
1119 | { | |
1120 | .name = "kernel", | |
1121 | .offset = MTDPART_OFS_APPEND, | |
1122 | .size = 0x200000, | |
1123 | }, | |
1124 | { | |
1125 | .name = "initfs", | |
1126 | .offset = MTDPART_OFS_APPEND, | |
1127 | .size = 0x200000, | |
1128 | }, | |
1129 | { | |
1130 | .name = "rootfs", | |
1131 | .offset = MTDPART_OFS_APPEND, | |
1132 | .size = MTDPART_SIZ_FULL, | |
1133 | }, | |
1134 | }; | |
1135 | ||
5403187f AK |
1136 | static struct omap_onenand_platform_data board_onenand_data[] = { |
1137 | { | |
1138 | .cs = 0, | |
1139 | .gpio_irq = 65, | |
1140 | .parts = onenand_partitions, | |
1141 | .nr_parts = ARRAY_SIZE(onenand_partitions), | |
1142 | .flags = ONENAND_SYNC_READWRITE, | |
1143 | } | |
aa62e90f | 1144 | }; |
aa62e90f | 1145 | #endif |
ffe7f95b | 1146 | |
bc593f5d | 1147 | static struct gpio rx51_wl1251_gpios[] __initdata = { |
bc593f5d IG |
1148 | { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, |
1149 | }; | |
1150 | ||
a24e61a9 KV |
1151 | static void __init rx51_init_wl1251(void) |
1152 | { | |
1153 | int irq, ret; | |
1154 | ||
bc593f5d IG |
1155 | ret = gpio_request_array(rx51_wl1251_gpios, |
1156 | ARRAY_SIZE(rx51_wl1251_gpios)); | |
a24e61a9 KV |
1157 | if (ret < 0) |
1158 | goto error; | |
1159 | ||
a24e61a9 KV |
1160 | irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); |
1161 | if (irq < 0) | |
1162 | goto err_irq; | |
1163 | ||
1d207cd3 | 1164 | wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; |
a24e61a9 KV |
1165 | rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; |
1166 | ||
1167 | return; | |
1168 | ||
1169 | err_irq: | |
1170 | gpio_free(RX51_WL1251_IRQ_GPIO); | |
a24e61a9 KV |
1171 | error: |
1172 | printk(KERN_ERR "wl1251 board initialisation failed\n"); | |
1d207cd3 | 1173 | wl1251_pdata.power_gpio = -1; |
a24e61a9 KV |
1174 | |
1175 | /* | |
1176 | * Now rx51_peripherals_spi_board_info[1].irq is zero and | |
1177 | * set_power is null, and wl1251_probe() will fail. | |
1178 | */ | |
1179 | } | |
1180 | ||
3dad5356 AK |
1181 | static struct tsc2005_platform_data tsc2005_pdata = { |
1182 | .ts_pressure_max = 2048, | |
1183 | .ts_pressure_fudge = 2, | |
1184 | .ts_x_max = 4096, | |
1185 | .ts_x_fudge = 4, | |
1186 | .ts_y_max = 4096, | |
1187 | .ts_y_fudge = 7, | |
1188 | .ts_x_plate_ohm = 280, | |
1189 | .esd_timeout_ms = 8000, | |
1190 | }; | |
1191 | ||
d4860ebe VZ |
1192 | static struct gpio rx51_tsc2005_gpios[] __initdata = { |
1193 | { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, | |
1194 | { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, | |
1195 | }; | |
1196 | ||
3dad5356 AK |
1197 | static void rx51_tsc2005_set_reset(bool enable) |
1198 | { | |
1199 | gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); | |
1200 | } | |
1201 | ||
1202 | static void __init rx51_init_tsc2005(void) | |
1203 | { | |
1204 | int r; | |
1205 | ||
d4860ebe VZ |
1206 | omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); |
1207 | omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); | |
3dad5356 | 1208 | |
d4860ebe VZ |
1209 | r = gpio_request_array(rx51_tsc2005_gpios, |
1210 | ARRAY_SIZE(rx51_tsc2005_gpios)); | |
1211 | if (r < 0) { | |
1212 | printk(KERN_ERR "tsc2005 board initialization failed\n"); | |
3dad5356 | 1213 | tsc2005_pdata.esd_timeout_ms = 0; |
d4860ebe | 1214 | return; |
3dad5356 | 1215 | } |
d4860ebe VZ |
1216 | |
1217 | tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; | |
2533c2cf TL |
1218 | rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = |
1219 | gpio_to_irq(RX51_TSC2005_IRQ_GPIO); | |
3dad5356 AK |
1220 | } |
1221 | ||
322c183c TK |
1222 | #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) |
1223 | static struct lirc_rx51_platform_data rx51_lirc_data = { | |
1224 | .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, | |
1225 | .pwm_timer = 9, /* Use GPT 9 for CIR */ | |
1226 | }; | |
1227 | ||
1228 | static struct platform_device rx51_lirc_device = { | |
1229 | .name = "lirc_rx51", | |
1230 | .id = -1, | |
1231 | .dev = { | |
1232 | .platform_data = &rx51_lirc_data, | |
1233 | }, | |
1234 | }; | |
1235 | ||
1236 | static void __init rx51_init_lirc(void) | |
1237 | { | |
1238 | platform_device_register(&rx51_lirc_device); | |
1239 | } | |
1240 | #else | |
1241 | static void __init rx51_init_lirc(void) | |
1242 | { | |
1243 | } | |
1244 | #endif | |
1245 | ||
749a34b3 PR |
1246 | static struct platform_device madc_hwmon = { |
1247 | .name = "twl4030_madc_hwmon", | |
1248 | .id = -1, | |
1249 | }; | |
1250 | ||
1251 | static void __init rx51_init_twl4030_hwmon(void) | |
1252 | { | |
1253 | platform_device_register(&madc_hwmon); | |
1254 | } | |
1255 | ||
d2065e2b PR |
1256 | static struct platform_device omap3_rom_rng_device = { |
1257 | .name = "omap3-rom-rng", | |
1258 | .id = -1, | |
1259 | .dev = { | |
1260 | .platform_data = rx51_secure_rng_call, | |
1261 | }, | |
1262 | }; | |
1263 | ||
1264 | static void __init rx51_init_omap3_rom_rng(void) | |
1265 | { | |
1266 | if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { | |
1267 | pr_info("RX-51: Registring OMAP3 HWRNG device\n"); | |
1268 | platform_device_register(&omap3_rom_rng_device); | |
1269 | } | |
1270 | } | |
1271 | ||
ffe7f95b LL |
1272 | void __init rx51_peripherals_init(void) |
1273 | { | |
ffe7f95b | 1274 | rx51_i2c_init(); |
094fc559 | 1275 | regulator_has_full_constraints(); |
5403187f | 1276 | gpmc_onenand_init(board_onenand_data); |
f014ee32 | 1277 | rx51_add_gpio_keys(); |
a24e61a9 | 1278 | rx51_init_wl1251(); |
3dad5356 | 1279 | rx51_init_tsc2005(); |
589541c0 | 1280 | rx51_init_si4713(); |
322c183c | 1281 | rx51_init_lirc(); |
a24e61a9 KV |
1282 | spi_register_board_info(rx51_peripherals_spi_board_info, |
1283 | ARRAY_SIZE(rx51_peripherals_spi_board_info)); | |
112485e9 BC |
1284 | |
1285 | partition = omap_mux_get("core"); | |
1286 | if (partition) | |
3b972bf0 | 1287 | omap_hsmmc_init(mmc); |
112485e9 | 1288 | |
10299e2e | 1289 | rx51_charger_init(); |
749a34b3 | 1290 | rx51_init_twl4030_hwmon(); |
d2065e2b | 1291 | rx51_init_omap3_rom_rng(); |
ffe7f95b LL |
1292 | } |
1293 |