Commit | Line | Data |
---|---|---|
ffe7f95b | 1 | /* |
9312fffb | 2 | * linux/arch/arm/mach-omap2/board-rx51-peripherals.c |
ffe7f95b LL |
3 | * |
4 | * Copyright (C) 2008-2009 Nokia | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/platform_device.h> | |
14 | #include <linux/input.h> | |
6135434a | 15 | #include <linux/input/matrix_keypad.h> |
ffe7f95b | 16 | #include <linux/spi/spi.h> |
c1f9a095 | 17 | #include <linux/wl12xx.h> |
3dad5356 | 18 | #include <linux/spi/tsc2005.h> |
ffe7f95b | 19 | #include <linux/i2c.h> |
ebeb53e1 | 20 | #include <linux/i2c/twl.h> |
ffe7f95b LL |
21 | #include <linux/clk.h> |
22 | #include <linux/delay.h> | |
23 | #include <linux/regulator/machine.h> | |
24 | #include <linux/gpio.h> | |
f014ee32 | 25 | #include <linux/gpio_keys.h> |
5e763d29 | 26 | #include <linux/mmc/host.h> |
10299e2e | 27 | #include <linux/power/isp1704_charger.h> |
2203747c AB |
28 | #include <linux/platform_data/spi-omap2-mcspi.h> |
29 | #include <linux/platform_data/mtd-onenand-omap2.h> | |
30 | ||
9f97da78 | 31 | #include <asm/system_info.h> |
ffe7f95b | 32 | |
4e65331c | 33 | #include "common.h" |
ce491cf8 TL |
34 | #include <plat/dma.h> |
35 | #include <plat/gpmc.h> | |
322c183c | 36 | #include <plat/omap-pm.h> |
60628152 | 37 | #include "gpmc-smc91x.h" |
ffe7f95b | 38 | |
0a6f98c9 | 39 | #include "board-rx51.h" |
04aeae77 | 40 | |
87581fd4 | 41 | #include <sound/tlv320aic3x.h> |
64d06691 | 42 | #include <sound/tpa6130a2-plat.h> |
589541c0 JN |
43 | #include <media/radio-si4713.h> |
44 | #include <media/si4713.h> | |
eeada9e8 | 45 | #include <linux/leds-lp5523.h> |
87581fd4 | 46 | |
70b5d737 | 47 | #include <../drivers/staging/iio/light/tsl2563.h> |
3b511201 | 48 | #include <linux/lis3lv02d.h> |
70b5d737 | 49 | |
322c183c TK |
50 | #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) |
51 | #include <media/ir-rx51.h> | |
52 | #endif | |
53 | ||
4896e394 | 54 | #include "mux.h" |
d02a900b | 55 | #include "hsmmc.h" |
fbd8071c | 56 | #include "common-board-devices.h" |
ffe7f95b | 57 | |
f52eeee8 AH |
58 | #define SYSTEM_REV_B_USES_VAUX3 0x1699 |
59 | #define SYSTEM_REV_S_USES_VAUX3 0x8 | |
60 | ||
a24e61a9 KV |
61 | #define RX51_WL1251_POWER_GPIO 87 |
62 | #define RX51_WL1251_IRQ_GPIO 42 | |
589541c0 JN |
63 | #define RX51_FMTX_RESET_GPIO 163 |
64 | #define RX51_FMTX_IRQ 53 | |
eeada9e8 | 65 | #define RX51_LP5523_CHIP_EN_GPIO 41 |
a24e61a9 | 66 | |
10299e2e KJ |
67 | #define RX51_USB_TRANSCEIVER_RST_GPIO 67 |
68 | ||
3dad5356 AK |
69 | #define RX51_TSC2005_RESET_GPIO 104 |
70 | #define RX51_TSC2005_IRQ_GPIO 100 | |
71 | ||
3b511201 AP |
72 | #define LIS302_IRQ1_GPIO 181 |
73 | #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ | |
74 | ||
a24e61a9 KV |
75 | /* list all spi devices here */ |
76 | enum { | |
77 | RX51_SPI_WL1251, | |
03e11104 | 78 | RX51_SPI_MIPID, /* LCD panel */ |
6996e7ff | 79 | RX51_SPI_TSC2005, /* Touch Controller */ |
a24e61a9 KV |
80 | }; |
81 | ||
82 | static struct wl12xx_platform_data wl1251_pdata; | |
3dad5356 | 83 | static struct tsc2005_platform_data tsc2005_pdata; |
a24e61a9 | 84 | |
3b511201 AP |
85 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
86 | static int lis302_setup(void) | |
87 | { | |
88 | int err; | |
89 | int irq1 = LIS302_IRQ1_GPIO; | |
90 | int irq2 = LIS302_IRQ2_GPIO; | |
91 | ||
92 | /* gpio for interrupt pin 1 */ | |
93 | err = gpio_request(irq1, "lis3lv02dl_irq1"); | |
94 | if (err) { | |
95 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
96 | goto out; | |
97 | } | |
98 | ||
99 | /* gpio for interrupt pin 2 */ | |
100 | err = gpio_request(irq2, "lis3lv02dl_irq2"); | |
101 | if (err) { | |
102 | gpio_free(irq1); | |
103 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
104 | goto out; | |
105 | } | |
106 | ||
107 | gpio_direction_input(irq1); | |
108 | gpio_direction_input(irq2); | |
109 | ||
110 | out: | |
111 | return err; | |
112 | } | |
113 | ||
114 | static int lis302_release(void) | |
115 | { | |
116 | gpio_free(LIS302_IRQ1_GPIO); | |
117 | gpio_free(LIS302_IRQ2_GPIO); | |
118 | ||
119 | return 0; | |
120 | } | |
121 | ||
122 | static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { | |
123 | .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | | |
124 | LIS3_CLICK_SINGLE_Z, | |
125 | /* Limits are 0.5g * value */ | |
126 | .click_thresh_x = 8, | |
127 | .click_thresh_y = 8, | |
128 | .click_thresh_z = 10, | |
129 | /* Click must be longer than time limit */ | |
130 | .click_time_limit = 9, | |
131 | /* Kind of debounce filter */ | |
132 | .click_latency = 50, | |
133 | ||
134 | /* Limits for all axis. millig-value / 18 to get HW values */ | |
135 | .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, | |
136 | .wakeup_thresh = 800 / 18, | |
137 | .wakeup_flags2 = LIS3_WAKEUP_Z_HI , | |
138 | .wakeup_thresh2 = 900 / 18, | |
139 | ||
140 | .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, | |
141 | ||
142 | /* Interrupt line 2 for click detection, line 1 for thresholds */ | |
143 | .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, | |
144 | ||
145 | .axis_x = LIS3_DEV_X, | |
146 | .axis_y = LIS3_INV_DEV_Y, | |
147 | .axis_z = LIS3_INV_DEV_Z, | |
148 | .setup_resources = lis302_setup, | |
149 | .release_resources = lis302_release, | |
150 | .st_min_limits = {-32, 3, 3}, | |
151 | .st_max_limits = {-3, 32, 32}, | |
3b511201 AP |
152 | }; |
153 | #endif | |
154 | ||
70b5d737 MN |
155 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
156 | static struct tsl2563_platform_data rx51_tsl2563_platform_data = { | |
157 | .cover_comp_gain = 16, | |
158 | }; | |
159 | #endif | |
160 | ||
eeada9e8 AP |
161 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) |
162 | static struct lp5523_led_config rx51_lp5523_led_config[] = { | |
163 | { | |
164 | .chan_nr = 0, | |
165 | .led_current = 50, | |
166 | }, { | |
167 | .chan_nr = 1, | |
168 | .led_current = 50, | |
169 | }, { | |
170 | .chan_nr = 2, | |
171 | .led_current = 50, | |
172 | }, { | |
173 | .chan_nr = 3, | |
174 | .led_current = 50, | |
175 | }, { | |
176 | .chan_nr = 4, | |
177 | .led_current = 50, | |
178 | }, { | |
179 | .chan_nr = 5, | |
180 | .led_current = 50, | |
181 | }, { | |
182 | .chan_nr = 6, | |
183 | .led_current = 50, | |
184 | }, { | |
185 | .chan_nr = 7, | |
186 | .led_current = 50, | |
187 | }, { | |
188 | .chan_nr = 8, | |
189 | .led_current = 50, | |
190 | } | |
191 | }; | |
192 | ||
193 | static int rx51_lp5523_setup(void) | |
194 | { | |
195 | return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, | |
196 | "lp5523_enable"); | |
197 | } | |
198 | ||
199 | static void rx51_lp5523_release(void) | |
200 | { | |
201 | gpio_free(RX51_LP5523_CHIP_EN_GPIO); | |
202 | } | |
203 | ||
204 | static void rx51_lp5523_enable(bool state) | |
205 | { | |
206 | gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); | |
207 | } | |
208 | ||
209 | static struct lp5523_platform_data rx51_lp5523_platform_data = { | |
210 | .led_config = rx51_lp5523_led_config, | |
211 | .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), | |
212 | .clock_mode = LP5523_CLOCK_AUTO, | |
213 | .setup_resources = rx51_lp5523_setup, | |
214 | .release_resources = rx51_lp5523_release, | |
215 | .enable = rx51_lp5523_enable, | |
216 | }; | |
217 | #endif | |
218 | ||
a24e61a9 KV |
219 | static struct omap2_mcspi_device_config wl1251_mcspi_config = { |
220 | .turbo_mode = 0, | |
a24e61a9 KV |
221 | }; |
222 | ||
03e11104 RQ |
223 | static struct omap2_mcspi_device_config mipid_mcspi_config = { |
224 | .turbo_mode = 0, | |
03e11104 RQ |
225 | }; |
226 | ||
6996e7ff RQ |
227 | static struct omap2_mcspi_device_config tsc2005_mcspi_config = { |
228 | .turbo_mode = 0, | |
6996e7ff RQ |
229 | }; |
230 | ||
a24e61a9 KV |
231 | static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { |
232 | [RX51_SPI_WL1251] = { | |
233 | .modalias = "wl1251", | |
234 | .bus_num = 4, | |
235 | .chip_select = 0, | |
236 | .max_speed_hz = 48000000, | |
860fc976 | 237 | .mode = SPI_MODE_3, |
a24e61a9 KV |
238 | .controller_data = &wl1251_mcspi_config, |
239 | .platform_data = &wl1251_pdata, | |
240 | }, | |
03e11104 RQ |
241 | [RX51_SPI_MIPID] = { |
242 | .modalias = "acx565akm", | |
243 | .bus_num = 1, | |
244 | .chip_select = 2, | |
245 | .max_speed_hz = 6000000, | |
246 | .controller_data = &mipid_mcspi_config, | |
247 | }, | |
6996e7ff RQ |
248 | [RX51_SPI_TSC2005] = { |
249 | .modalias = "tsc2005", | |
250 | .bus_num = 1, | |
251 | .chip_select = 0, | |
6996e7ff RQ |
252 | .max_speed_hz = 6000000, |
253 | .controller_data = &tsc2005_mcspi_config, | |
3dad5356 | 254 | .platform_data = &tsc2005_pdata, |
6996e7ff | 255 | }, |
a24e61a9 KV |
256 | }; |
257 | ||
10299e2e KJ |
258 | static void rx51_charger_set_power(bool on) |
259 | { | |
260 | gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); | |
261 | } | |
262 | ||
263 | static struct isp1704_charger_data rx51_charger_data = { | |
264 | .set_power = rx51_charger_set_power, | |
265 | }; | |
266 | ||
fd0964c5 | 267 | static struct platform_device rx51_charger_device = { |
10299e2e KJ |
268 | .name = "isp1704_charger", |
269 | .dev = { | |
270 | .platform_data = &rx51_charger_data, | |
271 | }, | |
fd0964c5 HK |
272 | }; |
273 | ||
10299e2e KJ |
274 | static void __init rx51_charger_init(void) |
275 | { | |
276 | WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, | |
e5fe29c7 | 277 | GPIOF_OUT_INIT_HIGH, "isp1704_reset")); |
10299e2e KJ |
278 | |
279 | platform_device_register(&rx51_charger_device); | |
280 | } | |
281 | ||
f014ee32 JN |
282 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
283 | ||
284 | #define RX51_GPIO_CAMERA_LENS_COVER 110 | |
285 | #define RX51_GPIO_CAMERA_FOCUS 68 | |
286 | #define RX51_GPIO_CAMERA_CAPTURE 69 | |
287 | #define RX51_GPIO_KEYPAD_SLIDE 71 | |
288 | #define RX51_GPIO_LOCK_BUTTON 113 | |
289 | #define RX51_GPIO_PROXIMITY 89 | |
290 | ||
291 | #define RX51_GPIO_DEBOUNCE_TIMEOUT 10 | |
292 | ||
293 | static struct gpio_keys_button rx51_gpio_keys[] = { | |
294 | { | |
295 | .desc = "Camera Lens Cover", | |
296 | .type = EV_SW, | |
297 | .code = SW_CAMERA_LENS_COVER, | |
298 | .gpio = RX51_GPIO_CAMERA_LENS_COVER, | |
299 | .active_low = 1, | |
300 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
301 | }, { | |
302 | .desc = "Camera Focus", | |
303 | .type = EV_KEY, | |
304 | .code = KEY_CAMERA_FOCUS, | |
305 | .gpio = RX51_GPIO_CAMERA_FOCUS, | |
306 | .active_low = 1, | |
307 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
308 | }, { | |
309 | .desc = "Camera Capture", | |
310 | .type = EV_KEY, | |
311 | .code = KEY_CAMERA, | |
312 | .gpio = RX51_GPIO_CAMERA_CAPTURE, | |
313 | .active_low = 1, | |
314 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
315 | }, { | |
316 | .desc = "Lock Button", | |
317 | .type = EV_KEY, | |
318 | .code = KEY_SCREENLOCK, | |
319 | .gpio = RX51_GPIO_LOCK_BUTTON, | |
320 | .active_low = 1, | |
321 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
322 | }, { | |
323 | .desc = "Keypad Slide", | |
324 | .type = EV_SW, | |
325 | .code = SW_KEYPAD_SLIDE, | |
326 | .gpio = RX51_GPIO_KEYPAD_SLIDE, | |
327 | .active_low = 1, | |
328 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
329 | }, { | |
330 | .desc = "Proximity Sensor", | |
331 | .type = EV_SW, | |
332 | .code = SW_FRONT_PROXIMITY, | |
333 | .gpio = RX51_GPIO_PROXIMITY, | |
334 | .active_low = 0, | |
335 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
336 | } | |
337 | }; | |
338 | ||
339 | static struct gpio_keys_platform_data rx51_gpio_keys_data = { | |
340 | .buttons = rx51_gpio_keys, | |
341 | .nbuttons = ARRAY_SIZE(rx51_gpio_keys), | |
342 | }; | |
343 | ||
344 | static struct platform_device rx51_gpio_keys_device = { | |
345 | .name = "gpio-keys", | |
346 | .id = -1, | |
347 | .dev = { | |
348 | .platform_data = &rx51_gpio_keys_data, | |
349 | }, | |
350 | }; | |
351 | ||
352 | static void __init rx51_add_gpio_keys(void) | |
353 | { | |
354 | platform_device_register(&rx51_gpio_keys_device); | |
355 | } | |
356 | #else | |
357 | static void __init rx51_add_gpio_keys(void) | |
358 | { | |
359 | } | |
360 | #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ | |
361 | ||
bead4375 | 362 | static uint32_t board_keymap[] = { |
3fea6026 DT |
363 | /* |
364 | * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row | |
365 | * connected to the ground" matrix state. | |
366 | */ | |
ffe7f95b | 367 | KEY(0, 0, KEY_Q), |
acf442dc AK |
368 | KEY(0, 1, KEY_O), |
369 | KEY(0, 2, KEY_P), | |
370 | KEY(0, 3, KEY_COMMA), | |
371 | KEY(0, 4, KEY_BACKSPACE), | |
372 | KEY(0, 6, KEY_A), | |
373 | KEY(0, 7, KEY_S), | |
3fea6026 | 374 | |
acf442dc | 375 | KEY(1, 0, KEY_W), |
ffe7f95b | 376 | KEY(1, 1, KEY_D), |
acf442dc AK |
377 | KEY(1, 2, KEY_F), |
378 | KEY(1, 3, KEY_G), | |
379 | KEY(1, 4, KEY_H), | |
380 | KEY(1, 5, KEY_J), | |
381 | KEY(1, 6, KEY_K), | |
382 | KEY(1, 7, KEY_L), | |
3fea6026 | 383 | |
acf442dc AK |
384 | KEY(2, 0, KEY_E), |
385 | KEY(2, 1, KEY_DOT), | |
ffe7f95b | 386 | KEY(2, 2, KEY_UP), |
acf442dc AK |
387 | KEY(2, 3, KEY_ENTER), |
388 | KEY(2, 5, KEY_Z), | |
389 | KEY(2, 6, KEY_X), | |
390 | KEY(2, 7, KEY_C), | |
3fea6026 DT |
391 | KEY(2, 8, KEY_F9), |
392 | ||
acf442dc AK |
393 | KEY(3, 0, KEY_R), |
394 | KEY(3, 1, KEY_V), | |
395 | KEY(3, 2, KEY_B), | |
ffe7f95b | 396 | KEY(3, 3, KEY_N), |
acf442dc AK |
397 | KEY(3, 4, KEY_M), |
398 | KEY(3, 5, KEY_SPACE), | |
399 | KEY(3, 6, KEY_SPACE), | |
400 | KEY(3, 7, KEY_LEFT), | |
3fea6026 | 401 | |
acf442dc AK |
402 | KEY(4, 0, KEY_T), |
403 | KEY(4, 1, KEY_DOWN), | |
404 | KEY(4, 2, KEY_RIGHT), | |
ffe7f95b | 405 | KEY(4, 4, KEY_LEFTCTRL), |
acf442dc AK |
406 | KEY(4, 5, KEY_RIGHTALT), |
407 | KEY(4, 6, KEY_LEFTSHIFT), | |
2e65a207 | 408 | KEY(4, 8, KEY_F10), |
3fea6026 | 409 | |
acf442dc | 410 | KEY(5, 0, KEY_Y), |
2e65a207 | 411 | KEY(5, 8, KEY_F11), |
3fea6026 | 412 | |
acf442dc | 413 | KEY(6, 0, KEY_U), |
3fea6026 | 414 | |
acf442dc AK |
415 | KEY(7, 0, KEY_I), |
416 | KEY(7, 1, KEY_F7), | |
417 | KEY(7, 2, KEY_F8), | |
ffe7f95b LL |
418 | }; |
419 | ||
4f543332 TL |
420 | static struct matrix_keymap_data board_map_data = { |
421 | .keymap = board_keymap, | |
422 | .keymap_size = ARRAY_SIZE(board_keymap), | |
423 | }; | |
424 | ||
ffe7f95b | 425 | static struct twl4030_keypad_data rx51_kp_data = { |
4f543332 | 426 | .keymap_data = &board_map_data, |
ffe7f95b LL |
427 | .rows = 8, |
428 | .cols = 8, | |
ffe7f95b LL |
429 | .rep = 1, |
430 | }; | |
431 | ||
ce6f0016 AH |
432 | /* Enable input logic and pull all lines up when eMMC is on. */ |
433 | static struct omap_board_mux rx51_mmc2_on_mux[] = { | |
434 | OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
435 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
436 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
437 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
438 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
439 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
440 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
441 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
442 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
443 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
444 | }; | |
445 | ||
446 | /* Disable input logic and pull all lines down when eMMC is off. */ | |
447 | static struct omap_board_mux rx51_mmc2_off_mux[] = { | |
448 | OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
449 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
450 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
451 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
452 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
453 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
454 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
455 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
456 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
457 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
458 | }; | |
459 | ||
112485e9 BC |
460 | static struct omap_mux_partition *partition; |
461 | ||
ce6f0016 AH |
462 | /* |
463 | * Current flows to eMMC when eMMC is off and the data lines are pulled up, | |
464 | * so pull them down. N.B. we pull 8 lines because we are using 8 lines. | |
465 | */ | |
466 | static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) | |
467 | { | |
468 | if (power_on) | |
112485e9 | 469 | omap_mux_write_array(partition, rx51_mmc2_on_mux); |
ce6f0016 | 470 | else |
112485e9 | 471 | omap_mux_write_array(partition, rx51_mmc2_off_mux); |
ce6f0016 AH |
472 | } |
473 | ||
68ff0423 | 474 | static struct omap2_hsmmc_info mmc[] __initdata = { |
ffe7f95b LL |
475 | { |
476 | .name = "external", | |
477 | .mmc = 1, | |
3a63833e | 478 | .caps = MMC_CAP_4_BIT_DATA, |
ffe7f95b LL |
479 | .cover_only = true, |
480 | .gpio_cd = 160, | |
481 | .gpio_wp = -EINVAL, | |
5e763d29 | 482 | .power_saving = true, |
ffe7f95b LL |
483 | }, |
484 | { | |
485 | .name = "internal", | |
486 | .mmc = 2, | |
3a63833e SG |
487 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, |
488 | /* See also rx51_mmc2_remux */ | |
ffe7f95b LL |
489 | .gpio_cd = -EINVAL, |
490 | .gpio_wp = -EINVAL, | |
5e763d29 AH |
491 | .nonremovable = true, |
492 | .power_saving = true, | |
ce6f0016 | 493 | .remux = rx51_mmc2_remux, |
ffe7f95b LL |
494 | }, |
495 | {} /* Terminator */ | |
496 | }; | |
497 | ||
786b01a8 OD |
498 | static struct regulator_consumer_supply rx51_vmmc1_supply[] = { |
499 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), | |
500 | }; | |
ffe7f95b | 501 | |
664a41b8 LT |
502 | static struct regulator_consumer_supply rx51_vaux2_supply[] = { |
503 | REGULATOR_SUPPLY("vdds_csib", "omap3isp"), | |
504 | }; | |
75ccf268 | 505 | |
786b01a8 OD |
506 | static struct regulator_consumer_supply rx51_vaux3_supply[] = { |
507 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), | |
508 | }; | |
ffe7f95b | 509 | |
786b01a8 OD |
510 | static struct regulator_consumer_supply rx51_vsim_supply[] = { |
511 | REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), | |
512 | }; | |
ffe7f95b | 513 | |
4cfcaef1 JN |
514 | static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { |
515 | /* tlv320aic3x analog supplies */ | |
5c7d9bbe JN |
516 | REGULATOR_SUPPLY("AVDD", "2-0018"), |
517 | REGULATOR_SUPPLY("DRVDD", "2-0018"), | |
caeeb4aa JN |
518 | REGULATOR_SUPPLY("AVDD", "2-0019"), |
519 | REGULATOR_SUPPLY("DRVDD", "2-0019"), | |
64d06691 JN |
520 | /* tpa6130a2 */ |
521 | REGULATOR_SUPPLY("Vdd", "2-0060"), | |
4cfcaef1 | 522 | /* Keep vmmc as last item. It is not iterated for newer boards */ |
0005ae73 | 523 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), |
4cfcaef1 JN |
524 | }; |
525 | ||
526 | static struct regulator_consumer_supply rx51_vio_supplies[] = { | |
527 | /* tlv320aic3x digital supplies */ | |
5c7d9bbe JN |
528 | REGULATOR_SUPPLY("IOVDD", "2-0018"), |
529 | REGULATOR_SUPPLY("DVDD", "2-0018"), | |
caeeb4aa JN |
530 | REGULATOR_SUPPLY("IOVDD", "2-0019"), |
531 | REGULATOR_SUPPLY("DVDD", "2-0019"), | |
589541c0 JN |
532 | /* Si4713 IO supply */ |
533 | REGULATOR_SUPPLY("vio", "2-0063"), | |
4cfcaef1 JN |
534 | }; |
535 | ||
0581b52e | 536 | static struct regulator_consumer_supply rx51_vaux1_consumers[] = { |
b5b9945b | 537 | REGULATOR_SUPPLY("vdds_sdi", "omapdss"), |
589541c0 JN |
538 | /* Si4713 supply */ |
539 | REGULATOR_SUPPLY("vdd", "2-0063"), | |
0581b52e RQ |
540 | }; |
541 | ||
ffe7f95b LL |
542 | static struct regulator_init_data rx51_vaux1 = { |
543 | .constraints = { | |
544 | .name = "V28", | |
545 | .min_uV = 2800000, | |
546 | .max_uV = 2800000, | |
000d534e | 547 | .always_on = true, /* due battery cover sensor */ |
ffe7f95b LL |
548 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
549 | | REGULATOR_MODE_STANDBY, | |
550 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
551 | | REGULATOR_CHANGE_STATUS, | |
552 | }, | |
0581b52e RQ |
553 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), |
554 | .consumer_supplies = rx51_vaux1_consumers, | |
ffe7f95b LL |
555 | }; |
556 | ||
557 | static struct regulator_init_data rx51_vaux2 = { | |
558 | .constraints = { | |
559 | .name = "VCSI", | |
560 | .min_uV = 1800000, | |
561 | .max_uV = 1800000, | |
562 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
563 | | REGULATOR_MODE_STANDBY, | |
564 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
565 | | REGULATOR_CHANGE_STATUS, | |
566 | }, | |
664a41b8 LT |
567 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), |
568 | .consumer_supplies = rx51_vaux2_supply, | |
ffe7f95b LL |
569 | }; |
570 | ||
571 | /* VAUX3 - adds more power to VIO_18 rail */ | |
f52eeee8 | 572 | static struct regulator_init_data rx51_vaux3_cam = { |
ffe7f95b LL |
573 | .constraints = { |
574 | .name = "VCAM_DIG_18", | |
575 | .min_uV = 1800000, | |
576 | .max_uV = 1800000, | |
577 | .apply_uV = true, | |
578 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
579 | | REGULATOR_MODE_STANDBY, | |
580 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
581 | | REGULATOR_CHANGE_STATUS, | |
582 | }, | |
583 | }; | |
584 | ||
f52eeee8 AH |
585 | static struct regulator_init_data rx51_vaux3_mmc = { |
586 | .constraints = { | |
587 | .name = "VMMC2_30", | |
588 | .min_uV = 2800000, | |
589 | .max_uV = 3000000, | |
590 | .apply_uV = true, | |
591 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
592 | | REGULATOR_MODE_STANDBY, | |
593 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
594 | | REGULATOR_CHANGE_MODE | |
595 | | REGULATOR_CHANGE_STATUS, | |
596 | }, | |
786b01a8 OD |
597 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), |
598 | .consumer_supplies = rx51_vaux3_supply, | |
f52eeee8 AH |
599 | }; |
600 | ||
ffe7f95b LL |
601 | static struct regulator_init_data rx51_vaux4 = { |
602 | .constraints = { | |
603 | .name = "VCAM_ANA_28", | |
604 | .min_uV = 2800000, | |
605 | .max_uV = 2800000, | |
606 | .apply_uV = true, | |
607 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
608 | | REGULATOR_MODE_STANDBY, | |
609 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
610 | | REGULATOR_CHANGE_STATUS, | |
611 | }, | |
612 | }; | |
613 | ||
614 | static struct regulator_init_data rx51_vmmc1 = { | |
615 | .constraints = { | |
616 | .min_uV = 1850000, | |
617 | .max_uV = 3150000, | |
618 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
619 | | REGULATOR_MODE_STANDBY, | |
620 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
621 | | REGULATOR_CHANGE_MODE | |
622 | | REGULATOR_CHANGE_STATUS, | |
623 | }, | |
786b01a8 OD |
624 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), |
625 | .consumer_supplies = rx51_vmmc1_supply, | |
ffe7f95b LL |
626 | }; |
627 | ||
628 | static struct regulator_init_data rx51_vmmc2 = { | |
629 | .constraints = { | |
f2add1de JN |
630 | .name = "V28_A", |
631 | .min_uV = 2800000, | |
632 | .max_uV = 3000000, | |
2827411e | 633 | .always_on = true, /* due VIO leak to AIC34 VDDs */ |
ffe7f95b LL |
634 | .apply_uV = true, |
635 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
636 | | REGULATOR_MODE_STANDBY, | |
637 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
638 | | REGULATOR_CHANGE_MODE | |
639 | | REGULATOR_CHANGE_STATUS, | |
640 | }, | |
4cfcaef1 JN |
641 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), |
642 | .consumer_supplies = rx51_vmmc2_supplies, | |
ffe7f95b LL |
643 | }; |
644 | ||
094fc559 KJ |
645 | static struct regulator_init_data rx51_vpll1 = { |
646 | .constraints = { | |
647 | .name = "VPLL", | |
648 | .min_uV = 1800000, | |
649 | .max_uV = 1800000, | |
650 | .apply_uV = true, | |
651 | .always_on = true, | |
652 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
653 | | REGULATOR_MODE_STANDBY, | |
654 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
655 | }, | |
656 | }; | |
657 | ||
658 | static struct regulator_init_data rx51_vpll2 = { | |
659 | .constraints = { | |
660 | .name = "VSDI_CSI", | |
661 | .min_uV = 1800000, | |
662 | .max_uV = 1800000, | |
663 | .apply_uV = true, | |
664 | .always_on = true, | |
665 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
666 | | REGULATOR_MODE_STANDBY, | |
667 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
668 | }, | |
669 | }; | |
670 | ||
ffe7f95b LL |
671 | static struct regulator_init_data rx51_vsim = { |
672 | .constraints = { | |
673 | .name = "VMMC2_IO_18", | |
674 | .min_uV = 1800000, | |
675 | .max_uV = 1800000, | |
676 | .apply_uV = true, | |
677 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
678 | | REGULATOR_MODE_STANDBY, | |
679 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
680 | | REGULATOR_CHANGE_STATUS, | |
681 | }, | |
786b01a8 OD |
682 | .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), |
683 | .consumer_supplies = rx51_vsim_supply, | |
ffe7f95b LL |
684 | }; |
685 | ||
4cfcaef1 JN |
686 | static struct regulator_init_data rx51_vio = { |
687 | .constraints = { | |
688 | .min_uV = 1800000, | |
689 | .max_uV = 1800000, | |
690 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
691 | | REGULATOR_MODE_STANDBY, | |
692 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
693 | | REGULATOR_CHANGE_MODE | |
694 | | REGULATOR_CHANGE_STATUS, | |
695 | }, | |
696 | .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), | |
697 | .consumer_supplies = rx51_vio_supplies, | |
698 | }; | |
699 | ||
094fc559 KJ |
700 | static struct regulator_init_data rx51_vintana1 = { |
701 | .constraints = { | |
702 | .name = "VINTANA1", | |
703 | .min_uV = 1500000, | |
704 | .max_uV = 1500000, | |
705 | .always_on = true, | |
706 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
707 | | REGULATOR_MODE_STANDBY, | |
708 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
709 | }, | |
710 | }; | |
711 | ||
712 | static struct regulator_init_data rx51_vintana2 = { | |
713 | .constraints = { | |
714 | .name = "VINTANA2", | |
715 | .min_uV = 2750000, | |
716 | .max_uV = 2750000, | |
717 | .apply_uV = true, | |
718 | .always_on = true, | |
719 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
720 | | REGULATOR_MODE_STANDBY, | |
721 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
722 | }, | |
723 | }; | |
724 | ||
725 | static struct regulator_init_data rx51_vintdig = { | |
726 | .constraints = { | |
727 | .name = "VINTDIG", | |
728 | .min_uV = 1500000, | |
729 | .max_uV = 1500000, | |
730 | .always_on = true, | |
731 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
732 | | REGULATOR_MODE_STANDBY, | |
733 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
734 | }, | |
735 | }; | |
736 | ||
589541c0 JN |
737 | static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { |
738 | .gpio_reset = RX51_FMTX_RESET_GPIO, | |
739 | }; | |
740 | ||
741 | static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { | |
742 | I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), | |
743 | .platform_data = &rx51_si4713_i2c_data, | |
744 | }; | |
745 | ||
746 | static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { | |
747 | .i2c_bus = 2, | |
748 | .subdev_board_info = &rx51_si4713_board_info, | |
749 | }; | |
750 | ||
07ad6ab3 | 751 | static struct platform_device rx51_si4713_dev = { |
589541c0 JN |
752 | .name = "radio-si4713", |
753 | .id = -1, | |
754 | .dev = { | |
755 | .platform_data = &rx51_si4713_data, | |
756 | }, | |
757 | }; | |
758 | ||
759 | static __init void rx51_init_si4713(void) | |
760 | { | |
761 | int err; | |
762 | ||
763 | err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); | |
764 | if (err) { | |
765 | printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); | |
766 | return; | |
767 | } | |
768 | rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); | |
769 | platform_device_register(&rx51_si4713_dev); | |
770 | } | |
771 | ||
ffe7f95b LL |
772 | static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) |
773 | { | |
774 | /* FIXME this gpio setup is just a placeholder for now */ | |
bc593f5d | 775 | gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); |
c0ad4fac | 776 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); |
ffe7f95b | 777 | |
ffe7f95b LL |
778 | return 0; |
779 | } | |
780 | ||
781 | static struct twl4030_gpio_platform_data rx51_gpio_data = { | |
ffe7f95b LL |
782 | .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) |
783 | | BIT(4) | BIT(5) | |
784 | | BIT(8) | BIT(9) | BIT(10) | BIT(11) | |
785 | | BIT(12) | BIT(13) | BIT(14) | BIT(15) | |
786 | | BIT(16) | BIT(17) , | |
787 | .setup = rx51_twlgpio_setup, | |
788 | }; | |
789 | ||
9312fffb AK |
790 | static struct twl4030_ins sleep_on_seq[] __initdata = { |
791 | /* | |
3c684e84 | 792 | * Turn off everything |
9312fffb | 793 | */ |
3c684e84 | 794 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, |
9312fffb AK |
795 | }; |
796 | ||
797 | static struct twl4030_script sleep_on_script __initdata = { | |
798 | .script = sleep_on_seq, | |
799 | .size = ARRAY_SIZE(sleep_on_seq), | |
800 | .flags = TWL4030_SLEEP_SCRIPT, | |
801 | }; | |
802 | ||
803 | static struct twl4030_ins wakeup_seq[] __initdata = { | |
804 | /* | |
3c684e84 | 805 | * Reenable everything |
9312fffb | 806 | */ |
3c684e84 | 807 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
808 | }; |
809 | ||
810 | static struct twl4030_script wakeup_script __initdata = { | |
811 | .script = wakeup_seq, | |
812 | .size = ARRAY_SIZE(wakeup_seq), | |
813 | .flags = TWL4030_WAKEUP12_SCRIPT, | |
814 | }; | |
815 | ||
816 | static struct twl4030_ins wakeup_p3_seq[] __initdata = { | |
817 | /* | |
3c684e84 | 818 | * Reenable everything |
9312fffb | 819 | */ |
3c684e84 | 820 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
821 | }; |
822 | ||
823 | static struct twl4030_script wakeup_p3_script __initdata = { | |
824 | .script = wakeup_p3_seq, | |
825 | .size = ARRAY_SIZE(wakeup_p3_seq), | |
826 | .flags = TWL4030_WAKEUP3_SCRIPT, | |
827 | }; | |
828 | ||
829 | static struct twl4030_ins wrst_seq[] __initdata = { | |
830 | /* | |
831 | * Reset twl4030. | |
832 | * Reset VDD1 regulator. | |
833 | * Reset VDD2 regulator. | |
834 | * Reset VPLL1 regulator. | |
835 | * Enable sysclk output. | |
836 | * Reenable twl4030. | |
837 | */ | |
838 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, | |
839 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), | |
840 | 0x13}, | |
9312fffb AK |
841 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, |
842 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, | |
843 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, | |
844 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, | |
3c684e84 | 845 | {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
846 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, |
847 | }; | |
848 | ||
849 | static struct twl4030_script wrst_script __initdata = { | |
850 | .script = wrst_seq, | |
851 | .size = ARRAY_SIZE(wrst_seq), | |
852 | .flags = TWL4030_WRST_SCRIPT, | |
853 | }; | |
854 | ||
855 | static struct twl4030_script *twl4030_scripts[] __initdata = { | |
856 | /* wakeup12 script should be loaded before sleep script, otherwise a | |
857 | board might hit retention before loading of wakeup script is | |
858 | completed. This can cause boot failures depending on timing issues. | |
859 | */ | |
860 | &wakeup_script, | |
861 | &sleep_on_script, | |
862 | &wakeup_p3_script, | |
863 | &wrst_script, | |
864 | }; | |
865 | ||
866 | static struct twl4030_resconfig twl4030_rconfig[] __initdata = { | |
3c684e84 AK |
867 | { .resource = RES_VDD1, .devgroup = -1, |
868 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
869 | .remap_sleep = RES_STATE_OFF | |
870 | }, | |
871 | { .resource = RES_VDD2, .devgroup = -1, | |
872 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
873 | .remap_sleep = RES_STATE_OFF | |
874 | }, | |
875 | { .resource = RES_VPLL1, .devgroup = -1, | |
876 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
877 | .remap_sleep = RES_STATE_OFF | |
878 | }, | |
879 | { .resource = RES_VPLL2, .devgroup = -1, | |
880 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
881 | }, | |
882 | { .resource = RES_VAUX1, .devgroup = -1, | |
883 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
884 | }, | |
885 | { .resource = RES_VAUX2, .devgroup = -1, | |
886 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
887 | }, | |
888 | { .resource = RES_VAUX3, .devgroup = -1, | |
889 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
890 | }, | |
891 | { .resource = RES_VAUX4, .devgroup = -1, | |
892 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
893 | }, | |
894 | { .resource = RES_VMMC1, .devgroup = -1, | |
895 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
896 | }, | |
897 | { .resource = RES_VMMC2, .devgroup = -1, | |
898 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
899 | }, | |
900 | { .resource = RES_VDAC, .devgroup = -1, | |
901 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
902 | }, | |
903 | { .resource = RES_VSIM, .devgroup = -1, | |
904 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
905 | }, | |
906 | { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
907 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
908 | }, | |
909 | { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
910 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
911 | }, | |
912 | { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
913 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
914 | }, | |
915 | { .resource = RES_VIO, .devgroup = DEV_GRP_P3, | |
916 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
917 | }, | |
918 | { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
919 | .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 | |
920 | }, | |
921 | { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
922 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
923 | }, | |
924 | { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
925 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
926 | }, | |
927 | { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
928 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
929 | }, | |
930 | { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, | |
931 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
932 | }, | |
933 | { .resource = RES_32KCLKOUT, .devgroup = -1, | |
934 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
935 | }, | |
936 | { .resource = RES_RESET, .devgroup = -1, | |
937 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
938 | }, | |
d7ac829f | 939 | { .resource = RES_MAIN_REF, .devgroup = -1, |
3c684e84 AK |
940 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 |
941 | }, | |
9312fffb AK |
942 | { 0, 0}, |
943 | }; | |
944 | ||
945 | static struct twl4030_power_data rx51_t2scripts_data __initdata = { | |
946 | .scripts = twl4030_scripts, | |
947 | .num = ARRAY_SIZE(twl4030_scripts), | |
948 | .resource_config = twl4030_rconfig, | |
949 | }; | |
950 | ||
8c3d4534 | 951 | static struct twl4030_vibra_data rx51_vibra_data __initdata = { |
b7a834cc IK |
952 | .coexist = 0, |
953 | }; | |
954 | ||
8c3d4534 | 955 | static struct twl4030_audio_data rx51_audio_data __initdata = { |
b7a834cc IK |
956 | .audio_mclk = 26000000, |
957 | .vibra = &rx51_vibra_data, | |
958 | }; | |
9312fffb | 959 | |
9312fffb | 960 | static struct twl4030_platform_data rx51_twldata __initdata = { |
ffe7f95b LL |
961 | /* platform_data for children goes here */ |
962 | .gpio = &rx51_gpio_data, | |
963 | .keypad = &rx51_kp_data, | |
9312fffb | 964 | .power = &rx51_t2scripts_data, |
4ae6df5e | 965 | .audio = &rx51_audio_data, |
ffe7f95b LL |
966 | |
967 | .vaux1 = &rx51_vaux1, | |
968 | .vaux2 = &rx51_vaux2, | |
ffe7f95b LL |
969 | .vaux4 = &rx51_vaux4, |
970 | .vmmc1 = &rx51_vmmc1, | |
094fc559 KJ |
971 | .vpll1 = &rx51_vpll1, |
972 | .vpll2 = &rx51_vpll2, | |
ffe7f95b | 973 | .vsim = &rx51_vsim, |
094fc559 KJ |
974 | .vintana1 = &rx51_vintana1, |
975 | .vintana2 = &rx51_vintana2, | |
976 | .vintdig = &rx51_vintdig, | |
4cfcaef1 | 977 | .vio = &rx51_vio, |
ffe7f95b LL |
978 | }; |
979 | ||
f0c61d3d | 980 | static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { |
64d06691 JN |
981 | .power_gpio = 98, |
982 | }; | |
983 | ||
f0fba2ad LG |
984 | /* Audio setup data */ |
985 | static struct aic3x_setup_data rx51_aic34_setup = { | |
986 | .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, | |
987 | .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, | |
988 | }; | |
989 | ||
e4862f2f | 990 | static struct aic3x_pdata rx51_aic3x_data = { |
f0fba2ad LG |
991 | .setup = &rx51_aic34_setup, |
992 | .gpio_reset = 60, | |
993 | }; | |
994 | ||
caeeb4aa JN |
995 | static struct aic3x_pdata rx51_aic3x_data2 = { |
996 | .gpio_reset = 60, | |
997 | }; | |
998 | ||
dabe929b JN |
999 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { |
1000 | { | |
1001 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | |
87581fd4 | 1002 | .platform_data = &rx51_aic3x_data, |
dabe929b | 1003 | }, |
caeeb4aa JN |
1004 | { |
1005 | I2C_BOARD_INFO("tlv320aic3x", 0x19), | |
1006 | .platform_data = &rx51_aic3x_data2, | |
1007 | }, | |
70b5d737 MN |
1008 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
1009 | { | |
1010 | I2C_BOARD_INFO("tsl2563", 0x29), | |
1011 | .platform_data = &rx51_tsl2563_platform_data, | |
1012 | }, | |
eeada9e8 AP |
1013 | #endif |
1014 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) | |
1015 | { | |
1016 | I2C_BOARD_INFO("lp5523", 0x32), | |
1017 | .platform_data = &rx51_lp5523_platform_data, | |
1018 | }, | |
70b5d737 | 1019 | #endif |
d77711aa PR |
1020 | { |
1021 | I2C_BOARD_INFO("bq27200", 0x55), | |
1022 | }, | |
64d06691 JN |
1023 | { |
1024 | I2C_BOARD_INFO("tpa6130a2", 0x60), | |
1025 | .platform_data = &rx51_tpa6130a2_data, | |
1026 | } | |
dabe929b JN |
1027 | }; |
1028 | ||
3b511201 AP |
1029 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { |
1030 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) | |
1031 | { | |
1032 | I2C_BOARD_INFO("lis3lv02d", 0x1d), | |
1033 | .platform_data = &rx51_lis3lv02d_data, | |
3b511201 AP |
1034 | }, |
1035 | #endif | |
1036 | }; | |
1037 | ||
ffe7f95b LL |
1038 | static int __init rx51_i2c_init(void) |
1039 | { | |
f52eeee8 | 1040 | if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || |
4cfcaef1 | 1041 | system_rev >= SYSTEM_REV_B_USES_VAUX3) { |
f52eeee8 | 1042 | rx51_twldata.vaux3 = &rx51_vaux3_mmc; |
4cfcaef1 JN |
1043 | /* Only older boards use VMMC2 for internal MMC */ |
1044 | rx51_vmmc2.num_consumer_supplies--; | |
1045 | } else { | |
f52eeee8 | 1046 | rx51_twldata.vaux3 = &rx51_vaux3_cam; |
f52eeee8 | 1047 | } |
4cfcaef1 | 1048 | rx51_twldata.vmmc2 = &rx51_vmmc2; |
827ed9ae | 1049 | omap3_pmic_get_config(&rx51_twldata, |
b252b0ef PU |
1050 | TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, |
1051 | TWL_COMMON_REGULATOR_VDAC); | |
1052 | ||
1053 | rx51_twldata.vdac->constraints.apply_uV = true; | |
1054 | rx51_twldata.vdac->constraints.name = "VDAC"; | |
1055 | ||
7d7e1eba | 1056 | omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); |
dabe929b JN |
1057 | omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, |
1058 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); | |
4d04317f TL |
1059 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
1060 | rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); | |
1061 | rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); | |
1062 | #endif | |
3b511201 AP |
1063 | omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, |
1064 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); | |
ffe7f95b LL |
1065 | return 0; |
1066 | } | |
1067 | ||
aa62e90f JY |
1068 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ |
1069 | defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) | |
1070 | ||
1071 | static struct mtd_partition onenand_partitions[] = { | |
1072 | { | |
1073 | .name = "bootloader", | |
1074 | .offset = 0, | |
1075 | .size = 0x20000, | |
1076 | .mask_flags = MTD_WRITEABLE, /* Force read-only */ | |
1077 | }, | |
1078 | { | |
1079 | .name = "config", | |
1080 | .offset = MTDPART_OFS_APPEND, | |
1081 | .size = 0x60000, | |
1082 | }, | |
1083 | { | |
1084 | .name = "log", | |
1085 | .offset = MTDPART_OFS_APPEND, | |
1086 | .size = 0x40000, | |
1087 | }, | |
1088 | { | |
1089 | .name = "kernel", | |
1090 | .offset = MTDPART_OFS_APPEND, | |
1091 | .size = 0x200000, | |
1092 | }, | |
1093 | { | |
1094 | .name = "initfs", | |
1095 | .offset = MTDPART_OFS_APPEND, | |
1096 | .size = 0x200000, | |
1097 | }, | |
1098 | { | |
1099 | .name = "rootfs", | |
1100 | .offset = MTDPART_OFS_APPEND, | |
1101 | .size = MTDPART_SIZ_FULL, | |
1102 | }, | |
1103 | }; | |
1104 | ||
5403187f AK |
1105 | static struct omap_onenand_platform_data board_onenand_data[] = { |
1106 | { | |
1107 | .cs = 0, | |
1108 | .gpio_irq = 65, | |
1109 | .parts = onenand_partitions, | |
1110 | .nr_parts = ARRAY_SIZE(onenand_partitions), | |
1111 | .flags = ONENAND_SYNC_READWRITE, | |
1112 | } | |
aa62e90f | 1113 | }; |
aa62e90f | 1114 | #endif |
ffe7f95b | 1115 | |
1a48e157 TL |
1116 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) |
1117 | ||
1118 | static struct omap_smc91x_platform_data board_smc91x_data = { | |
1119 | .cs = 1, | |
1120 | .gpio_irq = 54, | |
1121 | .gpio_pwrdwn = 86, | |
1122 | .gpio_reset = 164, | |
1123 | .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, | |
1124 | }; | |
1125 | ||
1126 | static void __init board_smc91x_init(void) | |
1127 | { | |
4896e394 TL |
1128 | omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); |
1129 | omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); | |
1130 | omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); | |
1a48e157 TL |
1131 | |
1132 | gpmc_smc91x_init(&board_smc91x_data); | |
1133 | } | |
1134 | ||
1135 | #else | |
1136 | ||
1137 | static inline void board_smc91x_init(void) | |
1138 | { | |
1139 | } | |
1140 | ||
1141 | #endif | |
1142 | ||
a24e61a9 KV |
1143 | static void rx51_wl1251_set_power(bool enable) |
1144 | { | |
1145 | gpio_set_value(RX51_WL1251_POWER_GPIO, enable); | |
1146 | } | |
1147 | ||
bc593f5d IG |
1148 | static struct gpio rx51_wl1251_gpios[] __initdata = { |
1149 | { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, | |
1150 | { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, | |
1151 | }; | |
1152 | ||
a24e61a9 KV |
1153 | static void __init rx51_init_wl1251(void) |
1154 | { | |
1155 | int irq, ret; | |
1156 | ||
bc593f5d IG |
1157 | ret = gpio_request_array(rx51_wl1251_gpios, |
1158 | ARRAY_SIZE(rx51_wl1251_gpios)); | |
a24e61a9 KV |
1159 | if (ret < 0) |
1160 | goto error; | |
1161 | ||
a24e61a9 KV |
1162 | irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); |
1163 | if (irq < 0) | |
1164 | goto err_irq; | |
1165 | ||
1166 | wl1251_pdata.set_power = rx51_wl1251_set_power; | |
1167 | rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; | |
1168 | ||
1169 | return; | |
1170 | ||
1171 | err_irq: | |
1172 | gpio_free(RX51_WL1251_IRQ_GPIO); | |
a24e61a9 | 1173 | gpio_free(RX51_WL1251_POWER_GPIO); |
a24e61a9 KV |
1174 | error: |
1175 | printk(KERN_ERR "wl1251 board initialisation failed\n"); | |
1176 | wl1251_pdata.set_power = NULL; | |
1177 | ||
1178 | /* | |
1179 | * Now rx51_peripherals_spi_board_info[1].irq is zero and | |
1180 | * set_power is null, and wl1251_probe() will fail. | |
1181 | */ | |
1182 | } | |
1183 | ||
3dad5356 AK |
1184 | static struct tsc2005_platform_data tsc2005_pdata = { |
1185 | .ts_pressure_max = 2048, | |
1186 | .ts_pressure_fudge = 2, | |
1187 | .ts_x_max = 4096, | |
1188 | .ts_x_fudge = 4, | |
1189 | .ts_y_max = 4096, | |
1190 | .ts_y_fudge = 7, | |
1191 | .ts_x_plate_ohm = 280, | |
1192 | .esd_timeout_ms = 8000, | |
1193 | }; | |
1194 | ||
d4860ebe VZ |
1195 | static struct gpio rx51_tsc2005_gpios[] __initdata = { |
1196 | { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, | |
1197 | { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, | |
1198 | }; | |
1199 | ||
3dad5356 AK |
1200 | static void rx51_tsc2005_set_reset(bool enable) |
1201 | { | |
1202 | gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); | |
1203 | } | |
1204 | ||
1205 | static void __init rx51_init_tsc2005(void) | |
1206 | { | |
1207 | int r; | |
1208 | ||
d4860ebe VZ |
1209 | omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); |
1210 | omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); | |
3dad5356 | 1211 | |
d4860ebe VZ |
1212 | r = gpio_request_array(rx51_tsc2005_gpios, |
1213 | ARRAY_SIZE(rx51_tsc2005_gpios)); | |
1214 | if (r < 0) { | |
1215 | printk(KERN_ERR "tsc2005 board initialization failed\n"); | |
3dad5356 | 1216 | tsc2005_pdata.esd_timeout_ms = 0; |
d4860ebe | 1217 | return; |
3dad5356 | 1218 | } |
d4860ebe VZ |
1219 | |
1220 | tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; | |
2533c2cf TL |
1221 | rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = |
1222 | gpio_to_irq(RX51_TSC2005_IRQ_GPIO); | |
3dad5356 AK |
1223 | } |
1224 | ||
322c183c TK |
1225 | #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) |
1226 | static struct lirc_rx51_platform_data rx51_lirc_data = { | |
1227 | .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, | |
1228 | .pwm_timer = 9, /* Use GPT 9 for CIR */ | |
1229 | }; | |
1230 | ||
1231 | static struct platform_device rx51_lirc_device = { | |
1232 | .name = "lirc_rx51", | |
1233 | .id = -1, | |
1234 | .dev = { | |
1235 | .platform_data = &rx51_lirc_data, | |
1236 | }, | |
1237 | }; | |
1238 | ||
1239 | static void __init rx51_init_lirc(void) | |
1240 | { | |
1241 | platform_device_register(&rx51_lirc_device); | |
1242 | } | |
1243 | #else | |
1244 | static void __init rx51_init_lirc(void) | |
1245 | { | |
1246 | } | |
1247 | #endif | |
1248 | ||
ffe7f95b LL |
1249 | void __init rx51_peripherals_init(void) |
1250 | { | |
ffe7f95b | 1251 | rx51_i2c_init(); |
094fc559 | 1252 | regulator_has_full_constraints(); |
5403187f | 1253 | gpmc_onenand_init(board_onenand_data); |
1a48e157 | 1254 | board_smc91x_init(); |
f014ee32 | 1255 | rx51_add_gpio_keys(); |
a24e61a9 | 1256 | rx51_init_wl1251(); |
3dad5356 | 1257 | rx51_init_tsc2005(); |
589541c0 | 1258 | rx51_init_si4713(); |
322c183c | 1259 | rx51_init_lirc(); |
a24e61a9 KV |
1260 | spi_register_board_info(rx51_peripherals_spi_board_info, |
1261 | ARRAY_SIZE(rx51_peripherals_spi_board_info)); | |
112485e9 BC |
1262 | |
1263 | partition = omap_mux_get("core"); | |
1264 | if (partition) | |
3b972bf0 | 1265 | omap_hsmmc_init(mmc); |
112485e9 | 1266 | |
10299e2e | 1267 | rx51_charger_init(); |
ffe7f95b LL |
1268 | } |
1269 |