Commit | Line | Data |
---|---|---|
ffe7f95b | 1 | /* |
9312fffb | 2 | * linux/arch/arm/mach-omap2/board-rx51-peripherals.c |
ffe7f95b LL |
3 | * |
4 | * Copyright (C) 2008-2009 Nokia | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | #include <linux/kernel.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/platform_device.h> | |
14 | #include <linux/input.h> | |
6135434a | 15 | #include <linux/input/matrix_keypad.h> |
ffe7f95b | 16 | #include <linux/spi/spi.h> |
c1f9a095 | 17 | #include <linux/wl12xx.h> |
3dad5356 | 18 | #include <linux/spi/tsc2005.h> |
ffe7f95b | 19 | #include <linux/i2c.h> |
ebeb53e1 | 20 | #include <linux/i2c/twl.h> |
ffe7f95b LL |
21 | #include <linux/clk.h> |
22 | #include <linux/delay.h> | |
23 | #include <linux/regulator/machine.h> | |
24 | #include <linux/gpio.h> | |
f014ee32 | 25 | #include <linux/gpio_keys.h> |
5e763d29 | 26 | #include <linux/mmc/host.h> |
10299e2e | 27 | #include <linux/power/isp1704_charger.h> |
9f97da78 | 28 | #include <asm/system_info.h> |
ffe7f95b | 29 | |
ce491cf8 | 30 | #include <plat/mcspi.h> |
ce491cf8 | 31 | #include <plat/board.h> |
4e65331c | 32 | #include "common.h" |
ce491cf8 TL |
33 | #include <plat/dma.h> |
34 | #include <plat/gpmc.h> | |
ce491cf8 TL |
35 | #include <plat/onenand.h> |
36 | #include <plat/gpmc-smc91x.h> | |
ffe7f95b | 37 | |
04aeae77 MK |
38 | #include <mach/board-rx51.h> |
39 | ||
87581fd4 | 40 | #include <sound/tlv320aic3x.h> |
64d06691 | 41 | #include <sound/tpa6130a2-plat.h> |
589541c0 JN |
42 | #include <media/radio-si4713.h> |
43 | #include <media/si4713.h> | |
eeada9e8 | 44 | #include <linux/leds-lp5523.h> |
87581fd4 | 45 | |
70b5d737 | 46 | #include <../drivers/staging/iio/light/tsl2563.h> |
3b511201 | 47 | #include <linux/lis3lv02d.h> |
70b5d737 | 48 | |
4896e394 | 49 | #include "mux.h" |
d02a900b | 50 | #include "hsmmc.h" |
fbd8071c | 51 | #include "common-board-devices.h" |
ffe7f95b | 52 | |
f52eeee8 AH |
53 | #define SYSTEM_REV_B_USES_VAUX3 0x1699 |
54 | #define SYSTEM_REV_S_USES_VAUX3 0x8 | |
55 | ||
a24e61a9 KV |
56 | #define RX51_WL1251_POWER_GPIO 87 |
57 | #define RX51_WL1251_IRQ_GPIO 42 | |
589541c0 JN |
58 | #define RX51_FMTX_RESET_GPIO 163 |
59 | #define RX51_FMTX_IRQ 53 | |
eeada9e8 | 60 | #define RX51_LP5523_CHIP_EN_GPIO 41 |
a24e61a9 | 61 | |
10299e2e KJ |
62 | #define RX51_USB_TRANSCEIVER_RST_GPIO 67 |
63 | ||
3dad5356 AK |
64 | #define RX51_TSC2005_RESET_GPIO 104 |
65 | #define RX51_TSC2005_IRQ_GPIO 100 | |
66 | ||
3b511201 AP |
67 | #define LIS302_IRQ1_GPIO 181 |
68 | #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ | |
69 | ||
a24e61a9 KV |
70 | /* list all spi devices here */ |
71 | enum { | |
72 | RX51_SPI_WL1251, | |
03e11104 | 73 | RX51_SPI_MIPID, /* LCD panel */ |
6996e7ff | 74 | RX51_SPI_TSC2005, /* Touch Controller */ |
a24e61a9 KV |
75 | }; |
76 | ||
77 | static struct wl12xx_platform_data wl1251_pdata; | |
3dad5356 | 78 | static struct tsc2005_platform_data tsc2005_pdata; |
a24e61a9 | 79 | |
3b511201 AP |
80 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
81 | static int lis302_setup(void) | |
82 | { | |
83 | int err; | |
84 | int irq1 = LIS302_IRQ1_GPIO; | |
85 | int irq2 = LIS302_IRQ2_GPIO; | |
86 | ||
87 | /* gpio for interrupt pin 1 */ | |
88 | err = gpio_request(irq1, "lis3lv02dl_irq1"); | |
89 | if (err) { | |
90 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
91 | goto out; | |
92 | } | |
93 | ||
94 | /* gpio for interrupt pin 2 */ | |
95 | err = gpio_request(irq2, "lis3lv02dl_irq2"); | |
96 | if (err) { | |
97 | gpio_free(irq1); | |
98 | printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); | |
99 | goto out; | |
100 | } | |
101 | ||
102 | gpio_direction_input(irq1); | |
103 | gpio_direction_input(irq2); | |
104 | ||
105 | out: | |
106 | return err; | |
107 | } | |
108 | ||
109 | static int lis302_release(void) | |
110 | { | |
111 | gpio_free(LIS302_IRQ1_GPIO); | |
112 | gpio_free(LIS302_IRQ2_GPIO); | |
113 | ||
114 | return 0; | |
115 | } | |
116 | ||
117 | static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { | |
118 | .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | | |
119 | LIS3_CLICK_SINGLE_Z, | |
120 | /* Limits are 0.5g * value */ | |
121 | .click_thresh_x = 8, | |
122 | .click_thresh_y = 8, | |
123 | .click_thresh_z = 10, | |
124 | /* Click must be longer than time limit */ | |
125 | .click_time_limit = 9, | |
126 | /* Kind of debounce filter */ | |
127 | .click_latency = 50, | |
128 | ||
129 | /* Limits for all axis. millig-value / 18 to get HW values */ | |
130 | .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, | |
131 | .wakeup_thresh = 800 / 18, | |
132 | .wakeup_flags2 = LIS3_WAKEUP_Z_HI , | |
133 | .wakeup_thresh2 = 900 / 18, | |
134 | ||
135 | .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, | |
136 | ||
137 | /* Interrupt line 2 for click detection, line 1 for thresholds */ | |
138 | .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, | |
139 | ||
140 | .axis_x = LIS3_DEV_X, | |
141 | .axis_y = LIS3_INV_DEV_Y, | |
142 | .axis_z = LIS3_INV_DEV_Z, | |
143 | .setup_resources = lis302_setup, | |
144 | .release_resources = lis302_release, | |
145 | .st_min_limits = {-32, 3, 3}, | |
146 | .st_max_limits = {-3, 32, 32}, | |
3b511201 AP |
147 | }; |
148 | #endif | |
149 | ||
70b5d737 MN |
150 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
151 | static struct tsl2563_platform_data rx51_tsl2563_platform_data = { | |
152 | .cover_comp_gain = 16, | |
153 | }; | |
154 | #endif | |
155 | ||
eeada9e8 AP |
156 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) |
157 | static struct lp5523_led_config rx51_lp5523_led_config[] = { | |
158 | { | |
159 | .chan_nr = 0, | |
160 | .led_current = 50, | |
161 | }, { | |
162 | .chan_nr = 1, | |
163 | .led_current = 50, | |
164 | }, { | |
165 | .chan_nr = 2, | |
166 | .led_current = 50, | |
167 | }, { | |
168 | .chan_nr = 3, | |
169 | .led_current = 50, | |
170 | }, { | |
171 | .chan_nr = 4, | |
172 | .led_current = 50, | |
173 | }, { | |
174 | .chan_nr = 5, | |
175 | .led_current = 50, | |
176 | }, { | |
177 | .chan_nr = 6, | |
178 | .led_current = 50, | |
179 | }, { | |
180 | .chan_nr = 7, | |
181 | .led_current = 50, | |
182 | }, { | |
183 | .chan_nr = 8, | |
184 | .led_current = 50, | |
185 | } | |
186 | }; | |
187 | ||
188 | static int rx51_lp5523_setup(void) | |
189 | { | |
190 | return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, | |
191 | "lp5523_enable"); | |
192 | } | |
193 | ||
194 | static void rx51_lp5523_release(void) | |
195 | { | |
196 | gpio_free(RX51_LP5523_CHIP_EN_GPIO); | |
197 | } | |
198 | ||
199 | static void rx51_lp5523_enable(bool state) | |
200 | { | |
201 | gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); | |
202 | } | |
203 | ||
204 | static struct lp5523_platform_data rx51_lp5523_platform_data = { | |
205 | .led_config = rx51_lp5523_led_config, | |
206 | .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), | |
207 | .clock_mode = LP5523_CLOCK_AUTO, | |
208 | .setup_resources = rx51_lp5523_setup, | |
209 | .release_resources = rx51_lp5523_release, | |
210 | .enable = rx51_lp5523_enable, | |
211 | }; | |
212 | #endif | |
213 | ||
a24e61a9 KV |
214 | static struct omap2_mcspi_device_config wl1251_mcspi_config = { |
215 | .turbo_mode = 0, | |
a24e61a9 KV |
216 | }; |
217 | ||
03e11104 RQ |
218 | static struct omap2_mcspi_device_config mipid_mcspi_config = { |
219 | .turbo_mode = 0, | |
03e11104 RQ |
220 | }; |
221 | ||
6996e7ff RQ |
222 | static struct omap2_mcspi_device_config tsc2005_mcspi_config = { |
223 | .turbo_mode = 0, | |
6996e7ff RQ |
224 | }; |
225 | ||
a24e61a9 KV |
226 | static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { |
227 | [RX51_SPI_WL1251] = { | |
228 | .modalias = "wl1251", | |
229 | .bus_num = 4, | |
230 | .chip_select = 0, | |
231 | .max_speed_hz = 48000000, | |
860fc976 | 232 | .mode = SPI_MODE_3, |
a24e61a9 KV |
233 | .controller_data = &wl1251_mcspi_config, |
234 | .platform_data = &wl1251_pdata, | |
235 | }, | |
03e11104 RQ |
236 | [RX51_SPI_MIPID] = { |
237 | .modalias = "acx565akm", | |
238 | .bus_num = 1, | |
239 | .chip_select = 2, | |
240 | .max_speed_hz = 6000000, | |
241 | .controller_data = &mipid_mcspi_config, | |
242 | }, | |
6996e7ff RQ |
243 | [RX51_SPI_TSC2005] = { |
244 | .modalias = "tsc2005", | |
245 | .bus_num = 1, | |
246 | .chip_select = 0, | |
6996e7ff RQ |
247 | .max_speed_hz = 6000000, |
248 | .controller_data = &tsc2005_mcspi_config, | |
3dad5356 | 249 | .platform_data = &tsc2005_pdata, |
6996e7ff | 250 | }, |
a24e61a9 KV |
251 | }; |
252 | ||
10299e2e KJ |
253 | static void rx51_charger_set_power(bool on) |
254 | { | |
255 | gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); | |
256 | } | |
257 | ||
258 | static struct isp1704_charger_data rx51_charger_data = { | |
259 | .set_power = rx51_charger_set_power, | |
260 | }; | |
261 | ||
fd0964c5 | 262 | static struct platform_device rx51_charger_device = { |
10299e2e KJ |
263 | .name = "isp1704_charger", |
264 | .dev = { | |
265 | .platform_data = &rx51_charger_data, | |
266 | }, | |
fd0964c5 HK |
267 | }; |
268 | ||
10299e2e KJ |
269 | static void __init rx51_charger_init(void) |
270 | { | |
271 | WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, | |
e5fe29c7 | 272 | GPIOF_OUT_INIT_HIGH, "isp1704_reset")); |
10299e2e KJ |
273 | |
274 | platform_device_register(&rx51_charger_device); | |
275 | } | |
276 | ||
f014ee32 JN |
277 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
278 | ||
279 | #define RX51_GPIO_CAMERA_LENS_COVER 110 | |
280 | #define RX51_GPIO_CAMERA_FOCUS 68 | |
281 | #define RX51_GPIO_CAMERA_CAPTURE 69 | |
282 | #define RX51_GPIO_KEYPAD_SLIDE 71 | |
283 | #define RX51_GPIO_LOCK_BUTTON 113 | |
284 | #define RX51_GPIO_PROXIMITY 89 | |
285 | ||
286 | #define RX51_GPIO_DEBOUNCE_TIMEOUT 10 | |
287 | ||
288 | static struct gpio_keys_button rx51_gpio_keys[] = { | |
289 | { | |
290 | .desc = "Camera Lens Cover", | |
291 | .type = EV_SW, | |
292 | .code = SW_CAMERA_LENS_COVER, | |
293 | .gpio = RX51_GPIO_CAMERA_LENS_COVER, | |
294 | .active_low = 1, | |
295 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
296 | }, { | |
297 | .desc = "Camera Focus", | |
298 | .type = EV_KEY, | |
299 | .code = KEY_CAMERA_FOCUS, | |
300 | .gpio = RX51_GPIO_CAMERA_FOCUS, | |
301 | .active_low = 1, | |
302 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
303 | }, { | |
304 | .desc = "Camera Capture", | |
305 | .type = EV_KEY, | |
306 | .code = KEY_CAMERA, | |
307 | .gpio = RX51_GPIO_CAMERA_CAPTURE, | |
308 | .active_low = 1, | |
309 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
310 | }, { | |
311 | .desc = "Lock Button", | |
312 | .type = EV_KEY, | |
313 | .code = KEY_SCREENLOCK, | |
314 | .gpio = RX51_GPIO_LOCK_BUTTON, | |
315 | .active_low = 1, | |
316 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
317 | }, { | |
318 | .desc = "Keypad Slide", | |
319 | .type = EV_SW, | |
320 | .code = SW_KEYPAD_SLIDE, | |
321 | .gpio = RX51_GPIO_KEYPAD_SLIDE, | |
322 | .active_low = 1, | |
323 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
324 | }, { | |
325 | .desc = "Proximity Sensor", | |
326 | .type = EV_SW, | |
327 | .code = SW_FRONT_PROXIMITY, | |
328 | .gpio = RX51_GPIO_PROXIMITY, | |
329 | .active_low = 0, | |
330 | .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, | |
331 | } | |
332 | }; | |
333 | ||
334 | static struct gpio_keys_platform_data rx51_gpio_keys_data = { | |
335 | .buttons = rx51_gpio_keys, | |
336 | .nbuttons = ARRAY_SIZE(rx51_gpio_keys), | |
337 | }; | |
338 | ||
339 | static struct platform_device rx51_gpio_keys_device = { | |
340 | .name = "gpio-keys", | |
341 | .id = -1, | |
342 | .dev = { | |
343 | .platform_data = &rx51_gpio_keys_data, | |
344 | }, | |
345 | }; | |
346 | ||
347 | static void __init rx51_add_gpio_keys(void) | |
348 | { | |
349 | platform_device_register(&rx51_gpio_keys_device); | |
350 | } | |
351 | #else | |
352 | static void __init rx51_add_gpio_keys(void) | |
353 | { | |
354 | } | |
355 | #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ | |
356 | ||
bead4375 | 357 | static uint32_t board_keymap[] = { |
3fea6026 DT |
358 | /* |
359 | * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row | |
360 | * connected to the ground" matrix state. | |
361 | */ | |
ffe7f95b | 362 | KEY(0, 0, KEY_Q), |
acf442dc AK |
363 | KEY(0, 1, KEY_O), |
364 | KEY(0, 2, KEY_P), | |
365 | KEY(0, 3, KEY_COMMA), | |
366 | KEY(0, 4, KEY_BACKSPACE), | |
367 | KEY(0, 6, KEY_A), | |
368 | KEY(0, 7, KEY_S), | |
3fea6026 | 369 | |
acf442dc | 370 | KEY(1, 0, KEY_W), |
ffe7f95b | 371 | KEY(1, 1, KEY_D), |
acf442dc AK |
372 | KEY(1, 2, KEY_F), |
373 | KEY(1, 3, KEY_G), | |
374 | KEY(1, 4, KEY_H), | |
375 | KEY(1, 5, KEY_J), | |
376 | KEY(1, 6, KEY_K), | |
377 | KEY(1, 7, KEY_L), | |
3fea6026 | 378 | |
acf442dc AK |
379 | KEY(2, 0, KEY_E), |
380 | KEY(2, 1, KEY_DOT), | |
ffe7f95b | 381 | KEY(2, 2, KEY_UP), |
acf442dc AK |
382 | KEY(2, 3, KEY_ENTER), |
383 | KEY(2, 5, KEY_Z), | |
384 | KEY(2, 6, KEY_X), | |
385 | KEY(2, 7, KEY_C), | |
3fea6026 DT |
386 | KEY(2, 8, KEY_F9), |
387 | ||
acf442dc AK |
388 | KEY(3, 0, KEY_R), |
389 | KEY(3, 1, KEY_V), | |
390 | KEY(3, 2, KEY_B), | |
ffe7f95b | 391 | KEY(3, 3, KEY_N), |
acf442dc AK |
392 | KEY(3, 4, KEY_M), |
393 | KEY(3, 5, KEY_SPACE), | |
394 | KEY(3, 6, KEY_SPACE), | |
395 | KEY(3, 7, KEY_LEFT), | |
3fea6026 | 396 | |
acf442dc AK |
397 | KEY(4, 0, KEY_T), |
398 | KEY(4, 1, KEY_DOWN), | |
399 | KEY(4, 2, KEY_RIGHT), | |
ffe7f95b | 400 | KEY(4, 4, KEY_LEFTCTRL), |
acf442dc AK |
401 | KEY(4, 5, KEY_RIGHTALT), |
402 | KEY(4, 6, KEY_LEFTSHIFT), | |
2e65a207 | 403 | KEY(4, 8, KEY_F10), |
3fea6026 | 404 | |
acf442dc | 405 | KEY(5, 0, KEY_Y), |
2e65a207 | 406 | KEY(5, 8, KEY_F11), |
3fea6026 | 407 | |
acf442dc | 408 | KEY(6, 0, KEY_U), |
3fea6026 | 409 | |
acf442dc AK |
410 | KEY(7, 0, KEY_I), |
411 | KEY(7, 1, KEY_F7), | |
412 | KEY(7, 2, KEY_F8), | |
ffe7f95b LL |
413 | }; |
414 | ||
4f543332 TL |
415 | static struct matrix_keymap_data board_map_data = { |
416 | .keymap = board_keymap, | |
417 | .keymap_size = ARRAY_SIZE(board_keymap), | |
418 | }; | |
419 | ||
ffe7f95b | 420 | static struct twl4030_keypad_data rx51_kp_data = { |
4f543332 | 421 | .keymap_data = &board_map_data, |
ffe7f95b LL |
422 | .rows = 8, |
423 | .cols = 8, | |
ffe7f95b LL |
424 | .rep = 1, |
425 | }; | |
426 | ||
ce6f0016 AH |
427 | /* Enable input logic and pull all lines up when eMMC is on. */ |
428 | static struct omap_board_mux rx51_mmc2_on_mux[] = { | |
429 | OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
430 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
431 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
432 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
433 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
434 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
435 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
436 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
437 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), | |
438 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
439 | }; | |
440 | ||
441 | /* Disable input logic and pull all lines down when eMMC is off. */ | |
442 | static struct omap_board_mux rx51_mmc2_off_mux[] = { | |
443 | OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
444 | OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
445 | OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
446 | OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
447 | OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
448 | OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
449 | OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
450 | OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
451 | OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), | |
452 | { .reg_offset = OMAP_MUX_TERMINATOR }, | |
453 | }; | |
454 | ||
112485e9 BC |
455 | static struct omap_mux_partition *partition; |
456 | ||
ce6f0016 AH |
457 | /* |
458 | * Current flows to eMMC when eMMC is off and the data lines are pulled up, | |
459 | * so pull them down. N.B. we pull 8 lines because we are using 8 lines. | |
460 | */ | |
461 | static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) | |
462 | { | |
463 | if (power_on) | |
112485e9 | 464 | omap_mux_write_array(partition, rx51_mmc2_on_mux); |
ce6f0016 | 465 | else |
112485e9 | 466 | omap_mux_write_array(partition, rx51_mmc2_off_mux); |
ce6f0016 AH |
467 | } |
468 | ||
68ff0423 | 469 | static struct omap2_hsmmc_info mmc[] __initdata = { |
ffe7f95b LL |
470 | { |
471 | .name = "external", | |
472 | .mmc = 1, | |
3a63833e | 473 | .caps = MMC_CAP_4_BIT_DATA, |
ffe7f95b LL |
474 | .cover_only = true, |
475 | .gpio_cd = 160, | |
476 | .gpio_wp = -EINVAL, | |
5e763d29 | 477 | .power_saving = true, |
ffe7f95b LL |
478 | }, |
479 | { | |
480 | .name = "internal", | |
481 | .mmc = 2, | |
3a63833e SG |
482 | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, |
483 | /* See also rx51_mmc2_remux */ | |
ffe7f95b LL |
484 | .gpio_cd = -EINVAL, |
485 | .gpio_wp = -EINVAL, | |
5e763d29 AH |
486 | .nonremovable = true, |
487 | .power_saving = true, | |
ce6f0016 | 488 | .remux = rx51_mmc2_remux, |
ffe7f95b LL |
489 | }, |
490 | {} /* Terminator */ | |
491 | }; | |
492 | ||
786b01a8 OD |
493 | static struct regulator_consumer_supply rx51_vmmc1_supply[] = { |
494 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), | |
495 | }; | |
ffe7f95b | 496 | |
664a41b8 LT |
497 | static struct regulator_consumer_supply rx51_vaux2_supply[] = { |
498 | REGULATOR_SUPPLY("vdds_csib", "omap3isp"), | |
499 | }; | |
75ccf268 | 500 | |
786b01a8 OD |
501 | static struct regulator_consumer_supply rx51_vaux3_supply[] = { |
502 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), | |
503 | }; | |
ffe7f95b | 504 | |
786b01a8 OD |
505 | static struct regulator_consumer_supply rx51_vsim_supply[] = { |
506 | REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), | |
507 | }; | |
ffe7f95b | 508 | |
4cfcaef1 JN |
509 | static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { |
510 | /* tlv320aic3x analog supplies */ | |
5c7d9bbe JN |
511 | REGULATOR_SUPPLY("AVDD", "2-0018"), |
512 | REGULATOR_SUPPLY("DRVDD", "2-0018"), | |
caeeb4aa JN |
513 | REGULATOR_SUPPLY("AVDD", "2-0019"), |
514 | REGULATOR_SUPPLY("DRVDD", "2-0019"), | |
64d06691 JN |
515 | /* tpa6130a2 */ |
516 | REGULATOR_SUPPLY("Vdd", "2-0060"), | |
4cfcaef1 | 517 | /* Keep vmmc as last item. It is not iterated for newer boards */ |
0005ae73 | 518 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), |
4cfcaef1 JN |
519 | }; |
520 | ||
521 | static struct regulator_consumer_supply rx51_vio_supplies[] = { | |
522 | /* tlv320aic3x digital supplies */ | |
5c7d9bbe JN |
523 | REGULATOR_SUPPLY("IOVDD", "2-0018"), |
524 | REGULATOR_SUPPLY("DVDD", "2-0018"), | |
caeeb4aa JN |
525 | REGULATOR_SUPPLY("IOVDD", "2-0019"), |
526 | REGULATOR_SUPPLY("DVDD", "2-0019"), | |
589541c0 JN |
527 | /* Si4713 IO supply */ |
528 | REGULATOR_SUPPLY("vio", "2-0063"), | |
4cfcaef1 JN |
529 | }; |
530 | ||
0581b52e | 531 | static struct regulator_consumer_supply rx51_vaux1_consumers[] = { |
b5b9945b | 532 | REGULATOR_SUPPLY("vdds_sdi", "omapdss"), |
589541c0 JN |
533 | /* Si4713 supply */ |
534 | REGULATOR_SUPPLY("vdd", "2-0063"), | |
0581b52e RQ |
535 | }; |
536 | ||
ffe7f95b LL |
537 | static struct regulator_init_data rx51_vaux1 = { |
538 | .constraints = { | |
539 | .name = "V28", | |
540 | .min_uV = 2800000, | |
541 | .max_uV = 2800000, | |
000d534e | 542 | .always_on = true, /* due battery cover sensor */ |
ffe7f95b LL |
543 | .valid_modes_mask = REGULATOR_MODE_NORMAL |
544 | | REGULATOR_MODE_STANDBY, | |
545 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
546 | | REGULATOR_CHANGE_STATUS, | |
547 | }, | |
0581b52e RQ |
548 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), |
549 | .consumer_supplies = rx51_vaux1_consumers, | |
ffe7f95b LL |
550 | }; |
551 | ||
552 | static struct regulator_init_data rx51_vaux2 = { | |
553 | .constraints = { | |
554 | .name = "VCSI", | |
555 | .min_uV = 1800000, | |
556 | .max_uV = 1800000, | |
557 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
558 | | REGULATOR_MODE_STANDBY, | |
559 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
560 | | REGULATOR_CHANGE_STATUS, | |
561 | }, | |
664a41b8 LT |
562 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), |
563 | .consumer_supplies = rx51_vaux2_supply, | |
ffe7f95b LL |
564 | }; |
565 | ||
566 | /* VAUX3 - adds more power to VIO_18 rail */ | |
f52eeee8 | 567 | static struct regulator_init_data rx51_vaux3_cam = { |
ffe7f95b LL |
568 | .constraints = { |
569 | .name = "VCAM_DIG_18", | |
570 | .min_uV = 1800000, | |
571 | .max_uV = 1800000, | |
572 | .apply_uV = true, | |
573 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
574 | | REGULATOR_MODE_STANDBY, | |
575 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
576 | | REGULATOR_CHANGE_STATUS, | |
577 | }, | |
578 | }; | |
579 | ||
f52eeee8 AH |
580 | static struct regulator_init_data rx51_vaux3_mmc = { |
581 | .constraints = { | |
582 | .name = "VMMC2_30", | |
583 | .min_uV = 2800000, | |
584 | .max_uV = 3000000, | |
585 | .apply_uV = true, | |
586 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
587 | | REGULATOR_MODE_STANDBY, | |
588 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
589 | | REGULATOR_CHANGE_MODE | |
590 | | REGULATOR_CHANGE_STATUS, | |
591 | }, | |
786b01a8 OD |
592 | .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), |
593 | .consumer_supplies = rx51_vaux3_supply, | |
f52eeee8 AH |
594 | }; |
595 | ||
ffe7f95b LL |
596 | static struct regulator_init_data rx51_vaux4 = { |
597 | .constraints = { | |
598 | .name = "VCAM_ANA_28", | |
599 | .min_uV = 2800000, | |
600 | .max_uV = 2800000, | |
601 | .apply_uV = true, | |
602 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
603 | | REGULATOR_MODE_STANDBY, | |
604 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
605 | | REGULATOR_CHANGE_STATUS, | |
606 | }, | |
607 | }; | |
608 | ||
609 | static struct regulator_init_data rx51_vmmc1 = { | |
610 | .constraints = { | |
611 | .min_uV = 1850000, | |
612 | .max_uV = 3150000, | |
613 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
614 | | REGULATOR_MODE_STANDBY, | |
615 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
616 | | REGULATOR_CHANGE_MODE | |
617 | | REGULATOR_CHANGE_STATUS, | |
618 | }, | |
786b01a8 OD |
619 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), |
620 | .consumer_supplies = rx51_vmmc1_supply, | |
ffe7f95b LL |
621 | }; |
622 | ||
623 | static struct regulator_init_data rx51_vmmc2 = { | |
624 | .constraints = { | |
f2add1de JN |
625 | .name = "V28_A", |
626 | .min_uV = 2800000, | |
627 | .max_uV = 3000000, | |
2827411e | 628 | .always_on = true, /* due VIO leak to AIC34 VDDs */ |
ffe7f95b LL |
629 | .apply_uV = true, |
630 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
631 | | REGULATOR_MODE_STANDBY, | |
632 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
633 | | REGULATOR_CHANGE_MODE | |
634 | | REGULATOR_CHANGE_STATUS, | |
635 | }, | |
4cfcaef1 JN |
636 | .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), |
637 | .consumer_supplies = rx51_vmmc2_supplies, | |
ffe7f95b LL |
638 | }; |
639 | ||
094fc559 KJ |
640 | static struct regulator_init_data rx51_vpll1 = { |
641 | .constraints = { | |
642 | .name = "VPLL", | |
643 | .min_uV = 1800000, | |
644 | .max_uV = 1800000, | |
645 | .apply_uV = true, | |
646 | .always_on = true, | |
647 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
648 | | REGULATOR_MODE_STANDBY, | |
649 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
650 | }, | |
651 | }; | |
652 | ||
653 | static struct regulator_init_data rx51_vpll2 = { | |
654 | .constraints = { | |
655 | .name = "VSDI_CSI", | |
656 | .min_uV = 1800000, | |
657 | .max_uV = 1800000, | |
658 | .apply_uV = true, | |
659 | .always_on = true, | |
660 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
661 | | REGULATOR_MODE_STANDBY, | |
662 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
663 | }, | |
664 | }; | |
665 | ||
ffe7f95b LL |
666 | static struct regulator_init_data rx51_vsim = { |
667 | .constraints = { | |
668 | .name = "VMMC2_IO_18", | |
669 | .min_uV = 1800000, | |
670 | .max_uV = 1800000, | |
671 | .apply_uV = true, | |
672 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
673 | | REGULATOR_MODE_STANDBY, | |
674 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
675 | | REGULATOR_CHANGE_STATUS, | |
676 | }, | |
786b01a8 OD |
677 | .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), |
678 | .consumer_supplies = rx51_vsim_supply, | |
ffe7f95b LL |
679 | }; |
680 | ||
4cfcaef1 JN |
681 | static struct regulator_init_data rx51_vio = { |
682 | .constraints = { | |
683 | .min_uV = 1800000, | |
684 | .max_uV = 1800000, | |
685 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
686 | | REGULATOR_MODE_STANDBY, | |
687 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
688 | | REGULATOR_CHANGE_MODE | |
689 | | REGULATOR_CHANGE_STATUS, | |
690 | }, | |
691 | .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), | |
692 | .consumer_supplies = rx51_vio_supplies, | |
693 | }; | |
694 | ||
094fc559 KJ |
695 | static struct regulator_init_data rx51_vintana1 = { |
696 | .constraints = { | |
697 | .name = "VINTANA1", | |
698 | .min_uV = 1500000, | |
699 | .max_uV = 1500000, | |
700 | .always_on = true, | |
701 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
702 | | REGULATOR_MODE_STANDBY, | |
703 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
704 | }, | |
705 | }; | |
706 | ||
707 | static struct regulator_init_data rx51_vintana2 = { | |
708 | .constraints = { | |
709 | .name = "VINTANA2", | |
710 | .min_uV = 2750000, | |
711 | .max_uV = 2750000, | |
712 | .apply_uV = true, | |
713 | .always_on = true, | |
714 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
715 | | REGULATOR_MODE_STANDBY, | |
716 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
717 | }, | |
718 | }; | |
719 | ||
720 | static struct regulator_init_data rx51_vintdig = { | |
721 | .constraints = { | |
722 | .name = "VINTDIG", | |
723 | .min_uV = 1500000, | |
724 | .max_uV = 1500000, | |
725 | .always_on = true, | |
726 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
727 | | REGULATOR_MODE_STANDBY, | |
728 | .valid_ops_mask = REGULATOR_CHANGE_MODE, | |
729 | }, | |
730 | }; | |
731 | ||
589541c0 JN |
732 | static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { |
733 | .gpio_reset = RX51_FMTX_RESET_GPIO, | |
734 | }; | |
735 | ||
736 | static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { | |
737 | I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), | |
738 | .platform_data = &rx51_si4713_i2c_data, | |
739 | }; | |
740 | ||
741 | static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { | |
742 | .i2c_bus = 2, | |
743 | .subdev_board_info = &rx51_si4713_board_info, | |
744 | }; | |
745 | ||
07ad6ab3 | 746 | static struct platform_device rx51_si4713_dev = { |
589541c0 JN |
747 | .name = "radio-si4713", |
748 | .id = -1, | |
749 | .dev = { | |
750 | .platform_data = &rx51_si4713_data, | |
751 | }, | |
752 | }; | |
753 | ||
754 | static __init void rx51_init_si4713(void) | |
755 | { | |
756 | int err; | |
757 | ||
758 | err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); | |
759 | if (err) { | |
760 | printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); | |
761 | return; | |
762 | } | |
763 | rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); | |
764 | platform_device_register(&rx51_si4713_dev); | |
765 | } | |
766 | ||
ffe7f95b LL |
767 | static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) |
768 | { | |
769 | /* FIXME this gpio setup is just a placeholder for now */ | |
bc593f5d | 770 | gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); |
c0ad4fac | 771 | gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); |
ffe7f95b | 772 | |
ffe7f95b LL |
773 | return 0; |
774 | } | |
775 | ||
776 | static struct twl4030_gpio_platform_data rx51_gpio_data = { | |
777 | .gpio_base = OMAP_MAX_GPIO_LINES, | |
778 | .irq_base = TWL4030_GPIO_IRQ_BASE, | |
779 | .irq_end = TWL4030_GPIO_IRQ_END, | |
780 | .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) | |
781 | | BIT(4) | BIT(5) | |
782 | | BIT(8) | BIT(9) | BIT(10) | BIT(11) | |
783 | | BIT(12) | BIT(13) | BIT(14) | BIT(15) | |
784 | | BIT(16) | BIT(17) , | |
785 | .setup = rx51_twlgpio_setup, | |
786 | }; | |
787 | ||
9312fffb AK |
788 | static struct twl4030_ins sleep_on_seq[] __initdata = { |
789 | /* | |
3c684e84 | 790 | * Turn off everything |
9312fffb | 791 | */ |
3c684e84 | 792 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, |
9312fffb AK |
793 | }; |
794 | ||
795 | static struct twl4030_script sleep_on_script __initdata = { | |
796 | .script = sleep_on_seq, | |
797 | .size = ARRAY_SIZE(sleep_on_seq), | |
798 | .flags = TWL4030_SLEEP_SCRIPT, | |
799 | }; | |
800 | ||
801 | static struct twl4030_ins wakeup_seq[] __initdata = { | |
802 | /* | |
3c684e84 | 803 | * Reenable everything |
9312fffb | 804 | */ |
3c684e84 | 805 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
806 | }; |
807 | ||
808 | static struct twl4030_script wakeup_script __initdata = { | |
809 | .script = wakeup_seq, | |
810 | .size = ARRAY_SIZE(wakeup_seq), | |
811 | .flags = TWL4030_WAKEUP12_SCRIPT, | |
812 | }; | |
813 | ||
814 | static struct twl4030_ins wakeup_p3_seq[] __initdata = { | |
815 | /* | |
3c684e84 | 816 | * Reenable everything |
9312fffb | 817 | */ |
3c684e84 | 818 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
819 | }; |
820 | ||
821 | static struct twl4030_script wakeup_p3_script __initdata = { | |
822 | .script = wakeup_p3_seq, | |
823 | .size = ARRAY_SIZE(wakeup_p3_seq), | |
824 | .flags = TWL4030_WAKEUP3_SCRIPT, | |
825 | }; | |
826 | ||
827 | static struct twl4030_ins wrst_seq[] __initdata = { | |
828 | /* | |
829 | * Reset twl4030. | |
830 | * Reset VDD1 regulator. | |
831 | * Reset VDD2 regulator. | |
832 | * Reset VPLL1 regulator. | |
833 | * Enable sysclk output. | |
834 | * Reenable twl4030. | |
835 | */ | |
836 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, | |
837 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), | |
838 | 0x13}, | |
9312fffb AK |
839 | {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, |
840 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, | |
841 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, | |
842 | {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, | |
3c684e84 | 843 | {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, |
9312fffb AK |
844 | {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, |
845 | }; | |
846 | ||
847 | static struct twl4030_script wrst_script __initdata = { | |
848 | .script = wrst_seq, | |
849 | .size = ARRAY_SIZE(wrst_seq), | |
850 | .flags = TWL4030_WRST_SCRIPT, | |
851 | }; | |
852 | ||
853 | static struct twl4030_script *twl4030_scripts[] __initdata = { | |
854 | /* wakeup12 script should be loaded before sleep script, otherwise a | |
855 | board might hit retention before loading of wakeup script is | |
856 | completed. This can cause boot failures depending on timing issues. | |
857 | */ | |
858 | &wakeup_script, | |
859 | &sleep_on_script, | |
860 | &wakeup_p3_script, | |
861 | &wrst_script, | |
862 | }; | |
863 | ||
864 | static struct twl4030_resconfig twl4030_rconfig[] __initdata = { | |
3c684e84 AK |
865 | { .resource = RES_VDD1, .devgroup = -1, |
866 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
867 | .remap_sleep = RES_STATE_OFF | |
868 | }, | |
869 | { .resource = RES_VDD2, .devgroup = -1, | |
870 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
871 | .remap_sleep = RES_STATE_OFF | |
872 | }, | |
873 | { .resource = RES_VPLL1, .devgroup = -1, | |
874 | .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, | |
875 | .remap_sleep = RES_STATE_OFF | |
876 | }, | |
877 | { .resource = RES_VPLL2, .devgroup = -1, | |
878 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
879 | }, | |
880 | { .resource = RES_VAUX1, .devgroup = -1, | |
881 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
882 | }, | |
883 | { .resource = RES_VAUX2, .devgroup = -1, | |
884 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
885 | }, | |
886 | { .resource = RES_VAUX3, .devgroup = -1, | |
887 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
888 | }, | |
889 | { .resource = RES_VAUX4, .devgroup = -1, | |
890 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
891 | }, | |
892 | { .resource = RES_VMMC1, .devgroup = -1, | |
893 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
894 | }, | |
895 | { .resource = RES_VMMC2, .devgroup = -1, | |
896 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
897 | }, | |
898 | { .resource = RES_VDAC, .devgroup = -1, | |
899 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
900 | }, | |
901 | { .resource = RES_VSIM, .devgroup = -1, | |
902 | .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 | |
903 | }, | |
904 | { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
905 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
906 | }, | |
907 | { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
908 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
909 | }, | |
910 | { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
911 | .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
912 | }, | |
913 | { .resource = RES_VIO, .devgroup = DEV_GRP_P3, | |
914 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
915 | }, | |
916 | { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
917 | .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 | |
918 | }, | |
919 | { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
920 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
921 | }, | |
922 | { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
923 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
924 | }, | |
925 | { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, | |
926 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
927 | }, | |
928 | { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, | |
929 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
930 | }, | |
931 | { .resource = RES_32KCLKOUT, .devgroup = -1, | |
932 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
933 | }, | |
934 | { .resource = RES_RESET, .devgroup = -1, | |
935 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 | |
936 | }, | |
d7ac829f | 937 | { .resource = RES_MAIN_REF, .devgroup = -1, |
3c684e84 AK |
938 | .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 |
939 | }, | |
9312fffb AK |
940 | { 0, 0}, |
941 | }; | |
942 | ||
943 | static struct twl4030_power_data rx51_t2scripts_data __initdata = { | |
944 | .scripts = twl4030_scripts, | |
945 | .num = ARRAY_SIZE(twl4030_scripts), | |
946 | .resource_config = twl4030_rconfig, | |
947 | }; | |
948 | ||
8c3d4534 | 949 | static struct twl4030_vibra_data rx51_vibra_data __initdata = { |
b7a834cc IK |
950 | .coexist = 0, |
951 | }; | |
952 | ||
8c3d4534 | 953 | static struct twl4030_audio_data rx51_audio_data __initdata = { |
b7a834cc IK |
954 | .audio_mclk = 26000000, |
955 | .vibra = &rx51_vibra_data, | |
956 | }; | |
9312fffb | 957 | |
9312fffb | 958 | static struct twl4030_platform_data rx51_twldata __initdata = { |
ffe7f95b LL |
959 | /* platform_data for children goes here */ |
960 | .gpio = &rx51_gpio_data, | |
961 | .keypad = &rx51_kp_data, | |
9312fffb | 962 | .power = &rx51_t2scripts_data, |
4ae6df5e | 963 | .audio = &rx51_audio_data, |
ffe7f95b LL |
964 | |
965 | .vaux1 = &rx51_vaux1, | |
966 | .vaux2 = &rx51_vaux2, | |
ffe7f95b LL |
967 | .vaux4 = &rx51_vaux4, |
968 | .vmmc1 = &rx51_vmmc1, | |
094fc559 KJ |
969 | .vpll1 = &rx51_vpll1, |
970 | .vpll2 = &rx51_vpll2, | |
ffe7f95b | 971 | .vsim = &rx51_vsim, |
094fc559 KJ |
972 | .vintana1 = &rx51_vintana1, |
973 | .vintana2 = &rx51_vintana2, | |
974 | .vintdig = &rx51_vintdig, | |
4cfcaef1 | 975 | .vio = &rx51_vio, |
ffe7f95b LL |
976 | }; |
977 | ||
f0c61d3d | 978 | static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { |
64d06691 JN |
979 | .power_gpio = 98, |
980 | }; | |
981 | ||
f0fba2ad LG |
982 | /* Audio setup data */ |
983 | static struct aic3x_setup_data rx51_aic34_setup = { | |
984 | .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, | |
985 | .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, | |
986 | }; | |
987 | ||
e4862f2f | 988 | static struct aic3x_pdata rx51_aic3x_data = { |
f0fba2ad LG |
989 | .setup = &rx51_aic34_setup, |
990 | .gpio_reset = 60, | |
991 | }; | |
992 | ||
caeeb4aa JN |
993 | static struct aic3x_pdata rx51_aic3x_data2 = { |
994 | .gpio_reset = 60, | |
995 | }; | |
996 | ||
dabe929b JN |
997 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { |
998 | { | |
999 | I2C_BOARD_INFO("tlv320aic3x", 0x18), | |
87581fd4 | 1000 | .platform_data = &rx51_aic3x_data, |
dabe929b | 1001 | }, |
caeeb4aa JN |
1002 | { |
1003 | I2C_BOARD_INFO("tlv320aic3x", 0x19), | |
1004 | .platform_data = &rx51_aic3x_data2, | |
1005 | }, | |
70b5d737 MN |
1006 | #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) |
1007 | { | |
1008 | I2C_BOARD_INFO("tsl2563", 0x29), | |
1009 | .platform_data = &rx51_tsl2563_platform_data, | |
1010 | }, | |
eeada9e8 AP |
1011 | #endif |
1012 | #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) | |
1013 | { | |
1014 | I2C_BOARD_INFO("lp5523", 0x32), | |
1015 | .platform_data = &rx51_lp5523_platform_data, | |
1016 | }, | |
70b5d737 | 1017 | #endif |
d77711aa PR |
1018 | { |
1019 | I2C_BOARD_INFO("bq27200", 0x55), | |
1020 | }, | |
64d06691 JN |
1021 | { |
1022 | I2C_BOARD_INFO("tpa6130a2", 0x60), | |
1023 | .platform_data = &rx51_tpa6130a2_data, | |
1024 | } | |
dabe929b JN |
1025 | }; |
1026 | ||
3b511201 AP |
1027 | static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { |
1028 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) | |
1029 | { | |
1030 | I2C_BOARD_INFO("lis3lv02d", 0x1d), | |
1031 | .platform_data = &rx51_lis3lv02d_data, | |
3b511201 AP |
1032 | }, |
1033 | #endif | |
1034 | }; | |
1035 | ||
ffe7f95b LL |
1036 | static int __init rx51_i2c_init(void) |
1037 | { | |
f52eeee8 | 1038 | if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || |
4cfcaef1 | 1039 | system_rev >= SYSTEM_REV_B_USES_VAUX3) { |
f52eeee8 | 1040 | rx51_twldata.vaux3 = &rx51_vaux3_mmc; |
4cfcaef1 JN |
1041 | /* Only older boards use VMMC2 for internal MMC */ |
1042 | rx51_vmmc2.num_consumer_supplies--; | |
1043 | } else { | |
f52eeee8 | 1044 | rx51_twldata.vaux3 = &rx51_vaux3_cam; |
f52eeee8 | 1045 | } |
4cfcaef1 | 1046 | rx51_twldata.vmmc2 = &rx51_vmmc2; |
827ed9ae | 1047 | omap3_pmic_get_config(&rx51_twldata, |
b252b0ef PU |
1048 | TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, |
1049 | TWL_COMMON_REGULATOR_VDAC); | |
1050 | ||
1051 | rx51_twldata.vdac->constraints.apply_uV = true; | |
1052 | rx51_twldata.vdac->constraints.name = "VDAC"; | |
1053 | ||
fbd8071c | 1054 | omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); |
dabe929b JN |
1055 | omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, |
1056 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); | |
4d04317f TL |
1057 | #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) |
1058 | rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); | |
1059 | rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); | |
1060 | #endif | |
3b511201 AP |
1061 | omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, |
1062 | ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); | |
ffe7f95b LL |
1063 | return 0; |
1064 | } | |
1065 | ||
aa62e90f JY |
1066 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ |
1067 | defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) | |
1068 | ||
1069 | static struct mtd_partition onenand_partitions[] = { | |
1070 | { | |
1071 | .name = "bootloader", | |
1072 | .offset = 0, | |
1073 | .size = 0x20000, | |
1074 | .mask_flags = MTD_WRITEABLE, /* Force read-only */ | |
1075 | }, | |
1076 | { | |
1077 | .name = "config", | |
1078 | .offset = MTDPART_OFS_APPEND, | |
1079 | .size = 0x60000, | |
1080 | }, | |
1081 | { | |
1082 | .name = "log", | |
1083 | .offset = MTDPART_OFS_APPEND, | |
1084 | .size = 0x40000, | |
1085 | }, | |
1086 | { | |
1087 | .name = "kernel", | |
1088 | .offset = MTDPART_OFS_APPEND, | |
1089 | .size = 0x200000, | |
1090 | }, | |
1091 | { | |
1092 | .name = "initfs", | |
1093 | .offset = MTDPART_OFS_APPEND, | |
1094 | .size = 0x200000, | |
1095 | }, | |
1096 | { | |
1097 | .name = "rootfs", | |
1098 | .offset = MTDPART_OFS_APPEND, | |
1099 | .size = MTDPART_SIZ_FULL, | |
1100 | }, | |
1101 | }; | |
1102 | ||
5403187f AK |
1103 | static struct omap_onenand_platform_data board_onenand_data[] = { |
1104 | { | |
1105 | .cs = 0, | |
1106 | .gpio_irq = 65, | |
1107 | .parts = onenand_partitions, | |
1108 | .nr_parts = ARRAY_SIZE(onenand_partitions), | |
1109 | .flags = ONENAND_SYNC_READWRITE, | |
1110 | } | |
aa62e90f | 1111 | }; |
aa62e90f | 1112 | #endif |
ffe7f95b | 1113 | |
1a48e157 TL |
1114 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) |
1115 | ||
1116 | static struct omap_smc91x_platform_data board_smc91x_data = { | |
1117 | .cs = 1, | |
1118 | .gpio_irq = 54, | |
1119 | .gpio_pwrdwn = 86, | |
1120 | .gpio_reset = 164, | |
1121 | .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, | |
1122 | }; | |
1123 | ||
1124 | static void __init board_smc91x_init(void) | |
1125 | { | |
4896e394 TL |
1126 | omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); |
1127 | omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); | |
1128 | omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); | |
1a48e157 TL |
1129 | |
1130 | gpmc_smc91x_init(&board_smc91x_data); | |
1131 | } | |
1132 | ||
1133 | #else | |
1134 | ||
1135 | static inline void board_smc91x_init(void) | |
1136 | { | |
1137 | } | |
1138 | ||
1139 | #endif | |
1140 | ||
a24e61a9 KV |
1141 | static void rx51_wl1251_set_power(bool enable) |
1142 | { | |
1143 | gpio_set_value(RX51_WL1251_POWER_GPIO, enable); | |
1144 | } | |
1145 | ||
bc593f5d IG |
1146 | static struct gpio rx51_wl1251_gpios[] __initdata = { |
1147 | { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, | |
1148 | { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, | |
1149 | }; | |
1150 | ||
a24e61a9 KV |
1151 | static void __init rx51_init_wl1251(void) |
1152 | { | |
1153 | int irq, ret; | |
1154 | ||
bc593f5d IG |
1155 | ret = gpio_request_array(rx51_wl1251_gpios, |
1156 | ARRAY_SIZE(rx51_wl1251_gpios)); | |
a24e61a9 KV |
1157 | if (ret < 0) |
1158 | goto error; | |
1159 | ||
a24e61a9 KV |
1160 | irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); |
1161 | if (irq < 0) | |
1162 | goto err_irq; | |
1163 | ||
1164 | wl1251_pdata.set_power = rx51_wl1251_set_power; | |
1165 | rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; | |
1166 | ||
1167 | return; | |
1168 | ||
1169 | err_irq: | |
1170 | gpio_free(RX51_WL1251_IRQ_GPIO); | |
a24e61a9 | 1171 | gpio_free(RX51_WL1251_POWER_GPIO); |
a24e61a9 KV |
1172 | error: |
1173 | printk(KERN_ERR "wl1251 board initialisation failed\n"); | |
1174 | wl1251_pdata.set_power = NULL; | |
1175 | ||
1176 | /* | |
1177 | * Now rx51_peripherals_spi_board_info[1].irq is zero and | |
1178 | * set_power is null, and wl1251_probe() will fail. | |
1179 | */ | |
1180 | } | |
1181 | ||
3dad5356 AK |
1182 | static struct tsc2005_platform_data tsc2005_pdata = { |
1183 | .ts_pressure_max = 2048, | |
1184 | .ts_pressure_fudge = 2, | |
1185 | .ts_x_max = 4096, | |
1186 | .ts_x_fudge = 4, | |
1187 | .ts_y_max = 4096, | |
1188 | .ts_y_fudge = 7, | |
1189 | .ts_x_plate_ohm = 280, | |
1190 | .esd_timeout_ms = 8000, | |
1191 | }; | |
1192 | ||
d4860ebe VZ |
1193 | static struct gpio rx51_tsc2005_gpios[] __initdata = { |
1194 | { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, | |
1195 | { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, | |
1196 | }; | |
1197 | ||
3dad5356 AK |
1198 | static void rx51_tsc2005_set_reset(bool enable) |
1199 | { | |
1200 | gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); | |
1201 | } | |
1202 | ||
1203 | static void __init rx51_init_tsc2005(void) | |
1204 | { | |
1205 | int r; | |
1206 | ||
d4860ebe VZ |
1207 | omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); |
1208 | omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); | |
3dad5356 | 1209 | |
d4860ebe VZ |
1210 | r = gpio_request_array(rx51_tsc2005_gpios, |
1211 | ARRAY_SIZE(rx51_tsc2005_gpios)); | |
1212 | if (r < 0) { | |
1213 | printk(KERN_ERR "tsc2005 board initialization failed\n"); | |
3dad5356 | 1214 | tsc2005_pdata.esd_timeout_ms = 0; |
d4860ebe | 1215 | return; |
3dad5356 | 1216 | } |
d4860ebe VZ |
1217 | |
1218 | tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; | |
2533c2cf TL |
1219 | rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = |
1220 | gpio_to_irq(RX51_TSC2005_IRQ_GPIO); | |
3dad5356 AK |
1221 | } |
1222 | ||
ffe7f95b LL |
1223 | void __init rx51_peripherals_init(void) |
1224 | { | |
ffe7f95b | 1225 | rx51_i2c_init(); |
094fc559 | 1226 | regulator_has_full_constraints(); |
5403187f | 1227 | gpmc_onenand_init(board_onenand_data); |
1a48e157 | 1228 | board_smc91x_init(); |
f014ee32 | 1229 | rx51_add_gpio_keys(); |
a24e61a9 | 1230 | rx51_init_wl1251(); |
3dad5356 | 1231 | rx51_init_tsc2005(); |
589541c0 | 1232 | rx51_init_si4713(); |
a24e61a9 KV |
1233 | spi_register_board_info(rx51_peripherals_spi_board_info, |
1234 | ARRAY_SIZE(rx51_peripherals_spi_board_info)); | |
112485e9 BC |
1235 | |
1236 | partition = omap_mux_get("core"); | |
1237 | if (partition) | |
3b972bf0 | 1238 | omap_hsmmc_init(mmc); |
112485e9 | 1239 | |
10299e2e | 1240 | rx51_charger_init(); |
ffe7f95b LL |
1241 | } |
1242 |