[deliverable/linux.git] / arch / arm / mach-omap2 / control.c

/*
 * OMAP2/3 System Control Module register access
 *
 * Copyright (C) 2007 Texas Instruments, Inc.
 * Copyright (C) 2007 Nokia Corporation
 *
 * Written by Paul Walmsley
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#undef DEBUG

#include <linux/kernel.h>
#include <linux/io.h>

#include <plat/common.h>
#include <plat/sdrc.h>

#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "prm.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"

static void __iomem *omap2_ctrl_base;
static void __iomem *omap4_ctrl_pad_base;

#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
struct omap3_scratchpad {
	u32 boot_config_ptr;
	u32 public_restore_ptr;
	u32 secure_ram_restore_ptr;
	u32 sdrc_module_semaphore;
	u32 prcm_block_offset;
	u32 sdrc_block_offset;
};

struct omap3_scratchpad_prcm_block {
	u32 prm_clksrc_ctrl;
	u32 prm_clksel;
	u32 cm_clksel_core;
	u32 cm_clksel_wkup;
	u32 cm_clken_pll;
	u32 cm_autoidle_pll;
	u32 cm_clksel1_pll;
	u32 cm_clksel2_pll;
	u32 cm_clksel3_pll;
	u32 cm_clken_pll_mpu;
	u32 cm_autoidle_pll_mpu;
	u32 cm_clksel1_pll_mpu;
	u32 cm_clksel2_pll_mpu;
	u32 prcm_block_size;
};

struct omap3_scratchpad_sdrc_block {
	u16 sysconfig;
	u16 cs_cfg;
	u16 sharing;
	u16 err_type;
	u32 dll_a_ctrl;
	u32 dll_b_ctrl;
	u32 power;
	u32 cs_0;
	u32 mcfg_0;
	u16 mr_0;
	u16 emr_1_0;
	u16 emr_2_0;
	u16 emr_3_0;
	u32 actim_ctrla_0;
	u32 actim_ctrlb_0;
	u32 rfr_ctrl_0;
	u32 cs_1;
	u32 mcfg_1;
	u16 mr_1;
	u16 emr_1_1;
	u16 emr_2_1;
	u16 emr_3_1;
	u32 actim_ctrla_1;
	u32 actim_ctrlb_1;
	u32 rfr_ctrl_1;
	u16 dcdl_1_ctrl;
	u16 dcdl_2_ctrl;
	u32 flags;
	u32 block_size;
};

void *omap3_secure_ram_storage;

/*
 * This is used to store ARM registers in SDRAM before attempting
 * an MPU OFF. The save and restore happens from the SRAM sleep code.
 * The address is stored in scratchpad, so that it can be used
 * during the restore path.
 */
u32 omap3_arm_context[128];

struct omap3_control_regs {
	u32 sysconfig;
	u32 devconf0;
	u32 mem_dftrw0;
	u32 mem_dftrw1;
	u32 msuspendmux_0;
	u32 msuspendmux_1;
	u32 msuspendmux_2;
	u32 msuspendmux_3;
	u32 msuspendmux_4;
	u32 msuspendmux_5;
	u32 sec_ctrl;
	u32 devconf1;
	u32 csirxfe;
	u32 iva2_bootaddr;
	u32 iva2_bootmod;
	u32 debobs_0;
	u32 debobs_1;
	u32 debobs_2;
	u32 debobs_3;
	u32 debobs_4;
	u32 debobs_5;
	u32 debobs_6;
	u32 debobs_7;
	u32 debobs_8;
	u32 prog_io0;
	u32 prog_io1;
	u32 dss_dpll_spreading;
	u32 core_dpll_spreading;
	u32 per_dpll_spreading;
	u32 usbhost_dpll_spreading;
	u32 pbias_lite;
	u32 temp_sensor;
	u32 sramldo4;
	u32 sramldo5;
	u32 csi;
};

static struct omap3_control_regs control_context;
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */

#define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
#define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))

void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
	/* Static mapping, never released */
	if (omap2_globals->ctrl) {
		omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
		WARN_ON(!omap2_ctrl_base);
	}

	/* Static mapping, never released */
	if (omap2_globals->ctrl_pad) {
		omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
		WARN_ON(!omap4_ctrl_pad_base);
	}
}

void __iomem *omap_ctrl_base_get(void)
{
	return omap2_ctrl_base;
}

u8 omap_ctrl_readb(u16 offset)
{
	return __raw_readb(OMAP_CTRL_REGADDR(offset));
}

u16 omap_ctrl_readw(u16 offset)
{
	return __raw_readw(OMAP_CTRL_REGADDR(offset));
}

u32 omap_ctrl_readl(u16 offset)
{
	return __raw_readl(OMAP_CTRL_REGADDR(offset));
}

void omap_ctrl_writeb(u8 val, u16 offset)
{
	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
}

void omap_ctrl_writew(u16 val, u16 offset)
{
	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
}

void omap_ctrl_writel(u32 val, u16 offset)
{
	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
}

/*
 * On OMAP4 control pad are not addressable from control
 * core base. So the common omap_ctrl_read/write APIs breaks
 * Hence export separate APIs to manage the omap4 pad control
 * registers. This APIs will work only for OMAP4
 */

u32 omap4_ctrl_pad_readl(u16 offset)
{
	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
}

void omap4_ctrl_pad_writel(u32 val, u16 offset)
{
	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
}

#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
/*
 * Clears the scratchpad contents in case of cold boot-
 * called during bootup
 */
void omap3_clear_scratchpad_contents(void)
{
	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
	void __iomem *v_addr;
	u32 offset = 0;
	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
	    OMAP3430_GLOBAL_COLD_RST_MASK) {
		for ( ; offset <= max_offset; offset += 0x4)
			__raw_writel(0x0, (v_addr + offset));
		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
				     OMAP3430_GR_MOD,
				     OMAP3_PRM_RSTST_OFFSET);
	}
}

/* Populate the scratchpad structure with restore structure */
void omap3_save_scratchpad_contents(void)
{
	void  __iomem *scratchpad_address;
	u32 arm_context_addr;
	struct omap3_scratchpad scratchpad_contents;
	struct omap3_scratchpad_prcm_block prcm_block_contents;
	struct omap3_scratchpad_sdrc_block sdrc_block_contents;

	/* Populate the Scratchpad contents */
	scratchpad_contents.boot_config_ptr = 0x0;
	if (cpu_is_omap3630())
		scratchpad_contents.public_restore_ptr =
			virt_to_phys(get_omap3630_restore_pointer());
	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
					omap_rev() != OMAP3430_REV_ES3_1)
		scratchpad_contents.public_restore_ptr =
			virt_to_phys(get_restore_pointer());
	else
		scratchpad_contents.public_restore_ptr =
			virt_to_phys(get_es3_restore_pointer());
	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
		scratchpad_contents.secure_ram_restore_ptr = 0x0;
	else
		scratchpad_contents.secure_ram_restore_ptr =
			(u32) __pa(omap3_secure_ram_storage);
	scratchpad_contents.sdrc_module_semaphore = 0x0;
	scratchpad_contents.prcm_block_offset = 0x2C;
	scratchpad_contents.sdrc_block_offset = 0x64;

	/* Populate the PRCM block contents */
	prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
			OMAP3_PRM_CLKSRC_CTRL_OFFSET);
	prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
			OMAP3_PRM_CLKSEL_OFFSET);
	prcm_block_contents.cm_clksel_core =
			cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
	prcm_block_contents.cm_clksel_wkup =
			cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
	prcm_block_contents.cm_clken_pll =
			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
	prcm_block_contents.cm_autoidle_pll =
			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
	prcm_block_contents.cm_clksel1_pll =
			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
	prcm_block_contents.cm_clksel2_pll =
			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
	prcm_block_contents.cm_clksel3_pll =
			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
	prcm_block_contents.cm_clken_pll_mpu =
			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
	prcm_block_contents.cm_autoidle_pll_mpu =
			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
	prcm_block_contents.cm_clksel1_pll_mpu =
			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
	prcm_block_contents.cm_clksel2_pll_mpu =
			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
	prcm_block_contents.prcm_block_size = 0x0;

	/* Populate the SDRC block contents */
	sdrc_block_contents.sysconfig =
			(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
	sdrc_block_contents.cs_cfg =
			(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
	sdrc_block_contents.sharing =
			(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
	sdrc_block_contents.err_type =
			(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
	sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
	sdrc_block_contents.dll_b_ctrl = 0x0;
	/*
	 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
	 * be programed to issue automatic self refresh on timeout
	 * of AUTO_CNT = 1 prior to any transition to OFF mode.
	 */
	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
			&& (omap_rev() >= OMAP3430_REV_ES3_0))
		sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
				~(SDRC_POWER_AUTOCOUNT_MASK|
				SDRC_POWER_CLKCTRL_MASK)) |
				(1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
				SDRC_SELF_REFRESH_ON_AUTOCOUNT;
	else
		sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);

	sdrc_block_contents.cs_0 = 0x0;
	sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
	sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
	sdrc_block_contents.emr_1_0 = 0x0;
	sdrc_block_contents.emr_2_0 = 0x0;
	sdrc_block_contents.emr_3_0 = 0x0;
	sdrc_block_contents.actim_ctrla_0 =
			sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
	sdrc_block_contents.actim_ctrlb_0 =
			sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
	sdrc_block_contents.rfr_ctrl_0 =
			sdrc_read_reg(SDRC_RFR_CTRL_0);
	sdrc_block_contents.cs_1 = 0x0;
	sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
	sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
	sdrc_block_contents.emr_1_1 = 0x0;
	sdrc_block_contents.emr_2_1 = 0x0;
	sdrc_block_contents.emr_3_1 = 0x0;
	sdrc_block_contents.actim_ctrla_1 =
			sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
	sdrc_block_contents.actim_ctrlb_1 =
			sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
	sdrc_block_contents.rfr_ctrl_1 =
			sdrc_read_reg(SDRC_RFR_CTRL_1);
	sdrc_block_contents.dcdl_1_ctrl = 0x0;
	sdrc_block_contents.dcdl_2_ctrl = 0x0;
	sdrc_block_contents.flags = 0x0;
	sdrc_block_contents.block_size = 0x0;

	arm_context_addr = virt_to_phys(omap3_arm_context);

	/* Copy all the contents to the scratchpad location */
	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
	memcpy_toio(scratchpad_address, &scratchpad_contents,
		 sizeof(scratchpad_contents));
	/* Scratchpad contents being 32 bits, a divide by 4 done here */
	memcpy_toio(scratchpad_address +
		scratchpad_contents.prcm_block_offset,
		&prcm_block_contents, sizeof(prcm_block_contents));
	memcpy_toio(scratchpad_address +
		scratchpad_contents.sdrc_block_offset,
		&sdrc_block_contents, sizeof(sdrc_block_contents));
	/*
	 * Copies the address of the location in SDRAM where ARM
	 * registers get saved during a MPU OFF transition.
	 */
	memcpy_toio(scratchpad_address +
		scratchpad_contents.sdrc_block_offset +
		sizeof(sdrc_block_contents), &arm_context_addr, 4);
}

void omap3_control_save_context(void)
{
	control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
	control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
	control_context.mem_dftrw0 =
			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
	control_context.mem_dftrw1 =
			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
	control_context.msuspendmux_0 =
			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
	control_context.msuspendmux_1 =
			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
	control_context.msuspendmux_2 =
			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
	control_context.msuspendmux_3 =
			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
	control_context.msuspendmux_4 =
			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
	control_context.msuspendmux_5 =
			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
	control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
	control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
	control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
	control_context.iva2_bootaddr =
			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
	control_context.iva2_bootmod =
			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
	control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
	control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
	control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
	control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
	control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
	control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
	control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
	control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
	control_context.dss_dpll_spreading =
			omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
	control_context.core_dpll_spreading =
			omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
	control_context.per_dpll_spreading =
			omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
	control_context.usbhost_dpll_spreading =
		omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
	control_context.pbias_lite =
			omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
	control_context.temp_sensor =
			omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
	return;
}

void omap3_control_restore_context(void)
{
	omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
	omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
	omap_ctrl_writel(control_context.mem_dftrw0,
					OMAP343X_CONTROL_MEM_DFTRW0);
	omap_ctrl_writel(control_context.mem_dftrw1,
					OMAP343X_CONTROL_MEM_DFTRW1);
	omap_ctrl_writel(control_context.msuspendmux_0,
					OMAP2_CONTROL_MSUSPENDMUX_0);
	omap_ctrl_writel(control_context.msuspendmux_1,
					OMAP2_CONTROL_MSUSPENDMUX_1);
	omap_ctrl_writel(control_context.msuspendmux_2,
					OMAP2_CONTROL_MSUSPENDMUX_2);
	omap_ctrl_writel(control_context.msuspendmux_3,
					OMAP2_CONTROL_MSUSPENDMUX_3);
	omap_ctrl_writel(control_context.msuspendmux_4,
					OMAP2_CONTROL_MSUSPENDMUX_4);
	omap_ctrl_writel(control_context.msuspendmux_5,
					OMAP2_CONTROL_MSUSPENDMUX_5);
	omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
	omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
	omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
	omap_ctrl_writel(control_context.iva2_bootaddr,
					OMAP343X_CONTROL_IVA2_BOOTADDR);
	omap_ctrl_writel(control_context.iva2_bootmod,
					OMAP343X_CONTROL_IVA2_BOOTMOD);
	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
	omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
	omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
	omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
	omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
	omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
	omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
	omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
	omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
	omap_ctrl_writel(control_context.dss_dpll_spreading,
					OMAP343X_CONTROL_DSS_DPLL_SPREADING);
	omap_ctrl_writel(control_context.core_dpll_spreading,
					OMAP343X_CONTROL_CORE_DPLL_SPREADING);
	omap_ctrl_writel(control_context.per_dpll_spreading,
					OMAP343X_CONTROL_PER_DPLL_SPREADING);
	omap_ctrl_writel(control_context.usbhost_dpll_spreading,
				OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
	omap_ctrl_writel(control_context.pbias_lite,
					OMAP343X_CONTROL_PBIAS_LITE);
	omap_ctrl_writel(control_context.temp_sensor,
					OMAP343X_CONTROL_TEMP_SENSOR);
	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
	return;
}

void omap3630_ctrl_disable_rta(void)
{
	if (!cpu_is_omap3630())
		return;
	omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
}

#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
Commit	Line	Data
69d88a00 PW	1	/*
	2	* OMAP2/3 System Control Module register access
	3	*
	4	* Copyright (C) 2007 Texas Instruments, Inc.
	5	* Copyright (C) 2007 Nokia Corporation
	6	*
	7	* Written by Paul Walmsley
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*/
	13	#undef DEBUG
	14
	15	#include <linux/kernel.h>
a58caad1	16	#include <linux/io.h>
69d88a00	17
ce491cf8	18	#include <plat/common.h>
80140786	19	#include <plat/sdrc.h>
4814ced5	20
80140786 RN	21	#include "cm-regbits-34xx.h"
	22	#include "prm-regbits-34xx.h"
	23	#include "cm.h"
	24	#include "prm.h"
	25	#include "sdrc.h"
38815733	26	#include "pm.h"
4814ced5	27	#include "control.h"
69d88a00	28
a58caad1	29	static void __iomem *omap2_ctrl_base;
0c349246	30	static void __iomem *omap4_ctrl_pad_base;
69d88a00	31
c96631e1	32	#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
80140786 RN	33	struct omap3_scratchpad {
	34	u32 boot_config_ptr;
	35	u32 public_restore_ptr;
	36	u32 secure_ram_restore_ptr;
	37	u32 sdrc_module_semaphore;
	38	u32 prcm_block_offset;
	39	u32 sdrc_block_offset;
	40	};
	41
	42	struct omap3_scratchpad_prcm_block {
	43	u32 prm_clksrc_ctrl;
	44	u32 prm_clksel;
	45	u32 cm_clksel_core;
	46	u32 cm_clksel_wkup;
	47	u32 cm_clken_pll;
	48	u32 cm_autoidle_pll;
	49	u32 cm_clksel1_pll;
	50	u32 cm_clksel2_pll;
	51	u32 cm_clksel3_pll;
	52	u32 cm_clken_pll_mpu;
	53	u32 cm_autoidle_pll_mpu;
	54	u32 cm_clksel1_pll_mpu;
	55	u32 cm_clksel2_pll_mpu;
	56	u32 prcm_block_size;
	57	};
	58
	59	struct omap3_scratchpad_sdrc_block {
	60	u16 sysconfig;
	61	u16 cs_cfg;
	62	u16 sharing;
	63	u16 err_type;
	64	u32 dll_a_ctrl;
	65	u32 dll_b_ctrl;
	66	u32 power;
	67	u32 cs_0;
	68	u32 mcfg_0;
	69	u16 mr_0;
	70	u16 emr_1_0;
	71	u16 emr_2_0;
	72	u16 emr_3_0;
	73	u32 actim_ctrla_0;
	74	u32 actim_ctrlb_0;
	75	u32 rfr_ctrl_0;
	76	u32 cs_1;
	77	u32 mcfg_1;
	78	u16 mr_1;
	79	u16 emr_1_1;
	80	u16 emr_2_1;
	81	u16 emr_3_1;
	82	u32 actim_ctrla_1;
	83	u32 actim_ctrlb_1;
	84	u32 rfr_ctrl_1;
	85	u16 dcdl_1_ctrl;
	86	u16 dcdl_2_ctrl;
	87	u32 flags;
	88	u32 block_size;
	89	};
	90
27d59a4a TK	91	void *omap3_secure_ram_storage;
27d59a4a TK	92
80140786 RN	93	/*
	94	* This is used to store ARM registers in SDRAM before attempting
	95	* an MPU OFF. The save and restore happens from the SRAM sleep code.
	96	* The address is stored in scratchpad, so that it can be used
	97	* during the restore path.
	98	*/
	99	u32 omap3_arm_context[128];
	100
c96631e1 RN	101	struct omap3_control_regs {
	102	u32 sysconfig;
	103	u32 devconf0;
	104	u32 mem_dftrw0;
	105	u32 mem_dftrw1;
	106	u32 msuspendmux_0;
	107	u32 msuspendmux_1;
	108	u32 msuspendmux_2;
	109	u32 msuspendmux_3;
	110	u32 msuspendmux_4;
	111	u32 msuspendmux_5;
	112	u32 sec_ctrl;
	113	u32 devconf1;
	114	u32 csirxfe;
	115	u32 iva2_bootaddr;
	116	u32 iva2_bootmod;
	117	u32 debobs_0;
	118	u32 debobs_1;
	119	u32 debobs_2;
	120	u32 debobs_3;
	121	u32 debobs_4;
	122	u32 debobs_5;
	123	u32 debobs_6;
	124	u32 debobs_7;
	125	u32 debobs_8;
	126	u32 prog_io0;
	127	u32 prog_io1;
	128	u32 dss_dpll_spreading;
	129	u32 core_dpll_spreading;
	130	u32 per_dpll_spreading;
	131	u32 usbhost_dpll_spreading;
	132	u32 pbias_lite;
	133	u32 temp_sensor;
	134	u32 sramldo4;
	135	u32 sramldo5;
	136	u32 csi;
	137	};
	138
	139	static struct omap3_control_regs control_context;
	140	#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
	141
a58caad1	142	#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
70ba71a2	143	#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
69d88a00	144
a58caad1	145	void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
69d88a00	146	{
b7ebb10b SS	147	/* Static mapping, never released */
	148	if (omap2_globals->ctrl) {
	149	omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
	150	WARN_ON(!omap2_ctrl_base);
	151	}
0c349246 SS	152
	153	/* Static mapping, never released */
	154	if (omap2_globals->ctrl_pad) {
	155	omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
	156	WARN_ON(!omap4_ctrl_pad_base);
	157	}
69d88a00 PW	158	}
69d88a00 PW	159
a58caad1	160	void __iomem *omap_ctrl_base_get(void)
69d88a00 PW	161	{
	162	return omap2_ctrl_base;
	163	}
	164
	165	u8 omap_ctrl_readb(u16 offset)
	166	{
	167	return __raw_readb(OMAP_CTRL_REGADDR(offset));
	168	}
	169
	170	u16 omap_ctrl_readw(u16 offset)
	171	{
	172	return __raw_readw(OMAP_CTRL_REGADDR(offset));
	173	}
	174
	175	u32 omap_ctrl_readl(u16 offset)
	176	{
	177	return __raw_readl(OMAP_CTRL_REGADDR(offset));
	178	}
	179
	180	void omap_ctrl_writeb(u8 val, u16 offset)
	181	{
69d88a00 PW	182	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
	183	}
	184
	185	void omap_ctrl_writew(u16 val, u16 offset)
	186	{
69d88a00 PW	187	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
	188	}
	189
	190	void omap_ctrl_writel(u32 val, u16 offset)
	191	{
69d88a00 PW	192	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
	193	}
	194
70ba71a2 SS	195	/*
	196	* On OMAP4 control pad are not addressable from control
	197	* core base. So the common omap_ctrl_read/write APIs breaks
	198	* Hence export separate APIs to manage the omap4 pad control
	199	* registers. This APIs will work only for OMAP4
	200	*/
	201
	202	u32 omap4_ctrl_pad_readl(u16 offset)
	203	{
	204	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
	205	}
	206
	207	void omap4_ctrl_pad_writel(u32 val, u16 offset)
	208	{
	209	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
	210	}
	211
c96631e1	212	#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
80140786 RN	213	/*
	214	* Clears the scratchpad contents in case of cold boot-
	215	* called during bootup
	216	*/
	217	void omap3_clear_scratchpad_contents(void)
	218	{
	219	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
4d63bc1d	220	void __iomem *v_addr;
80140786 RN	221	u32 offset = 0;
	222	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
	223	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
2bc4ef71	224	OMAP3430_GLOBAL_COLD_RST_MASK) {
80140786 RN	225	for ( ; offset <= max_offset; offset += 0x4)
80140786 RN	226	__raw_writel(0x0, (v_addr + offset));
2bc4ef71 PW	227	prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
	228	OMAP3430_GR_MOD,
	229	OMAP3_PRM_RSTST_OFFSET);
80140786 RN	230	}
	231	}
	232
	233	/* Populate the scratchpad structure with restore structure */
	234	void omap3_save_scratchpad_contents(void)
	235	{
4d63bc1d	236	void __iomem *scratchpad_address;
80140786 RN	237	u32 arm_context_addr;
	238	struct omap3_scratchpad scratchpad_contents;
	239	struct omap3_scratchpad_prcm_block prcm_block_contents;
	240	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
	241
	242	/* Populate the Scratchpad contents */
	243	scratchpad_contents.boot_config_ptr = 0x0;
458e999e NM	244	if (cpu_is_omap3630())
	245	scratchpad_contents.public_restore_ptr =
	246	virt_to_phys(get_omap3630_restore_pointer());
	247	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
0795a75a TK	248	omap_rev() != OMAP3430_REV_ES3_1)
	249	scratchpad_contents.public_restore_ptr =
	250	virt_to_phys(get_restore_pointer());
	251	else
	252	scratchpad_contents.public_restore_ptr =
	253	virt_to_phys(get_es3_restore_pointer());
27d59a4a TK	254	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
	255	scratchpad_contents.secure_ram_restore_ptr = 0x0;
	256	else
	257	scratchpad_contents.secure_ram_restore_ptr =
	258	(u32) __pa(omap3_secure_ram_storage);
80140786 RN	259	scratchpad_contents.sdrc_module_semaphore = 0x0;
	260	scratchpad_contents.prcm_block_offset = 0x2C;
	261	scratchpad_contents.sdrc_block_offset = 0x64;
	262
	263	/* Populate the PRCM block contents */
	264	prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
	265	OMAP3_PRM_CLKSRC_CTRL_OFFSET);
	266	prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
	267	OMAP3_PRM_CLKSEL_OFFSET);
	268	prcm_block_contents.cm_clksel_core =
	269	cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
	270	prcm_block_contents.cm_clksel_wkup =
	271	cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
	272	prcm_block_contents.cm_clken_pll =
cb0cb2b8	273	cm_read_mod_reg(PLL_MOD, CM_CLKEN);
80140786 RN	274	prcm_block_contents.cm_autoidle_pll =
	275	cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
	276	prcm_block_contents.cm_clksel1_pll =
	277	cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
	278	prcm_block_contents.cm_clksel2_pll =
	279	cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
	280	prcm_block_contents.cm_clksel3_pll =
	281	cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
	282	prcm_block_contents.cm_clken_pll_mpu =
	283	cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
	284	prcm_block_contents.cm_autoidle_pll_mpu =
	285	cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
	286	prcm_block_contents.cm_clksel1_pll_mpu =
	287	cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
	288	prcm_block_contents.cm_clksel2_pll_mpu =
	289	cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
	290	prcm_block_contents.prcm_block_size = 0x0;
	291
	292	/* Populate the SDRC block contents */
	293	sdrc_block_contents.sysconfig =
	294	(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
	295	sdrc_block_contents.cs_cfg =
	296	(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
	297	sdrc_block_contents.sharing =
	298	(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
	299	sdrc_block_contents.err_type =
	300	(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
	301	sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
	302	sdrc_block_contents.dll_b_ctrl = 0x0;
f265dc4c RN	303	/*
	304	* Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
	305	* be programed to issue automatic self refresh on timeout
	306	* of AUTO_CNT = 1 prior to any transition to OFF mode.
	307	*/
	308	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
	309	&& (omap_rev() >= OMAP3430_REV_ES3_0))
	310	sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
	311	~(SDRC_POWER_AUTOCOUNT_MASK\|
	312	SDRC_POWER_CLKCTRL_MASK)) \|
	313	(1 << SDRC_POWER_AUTOCOUNT_SHIFT) \|
	314	SDRC_SELF_REFRESH_ON_AUTOCOUNT;
	315	else
	316	sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
	317
80140786 RN	318	sdrc_block_contents.cs_0 = 0x0;
	319	sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
	320	sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
	321	sdrc_block_contents.emr_1_0 = 0x0;
	322	sdrc_block_contents.emr_2_0 = 0x0;
	323	sdrc_block_contents.emr_3_0 = 0x0;
	324	sdrc_block_contents.actim_ctrla_0 =
	325	sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
	326	sdrc_block_contents.actim_ctrlb_0 =
	327	sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
	328	sdrc_block_contents.rfr_ctrl_0 =
	329	sdrc_read_reg(SDRC_RFR_CTRL_0);
	330	sdrc_block_contents.cs_1 = 0x0;
	331	sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
	332	sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
	333	sdrc_block_contents.emr_1_1 = 0x0;
	334	sdrc_block_contents.emr_2_1 = 0x0;
	335	sdrc_block_contents.emr_3_1 = 0x0;
	336	sdrc_block_contents.actim_ctrla_1 =
	337	sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
	338	sdrc_block_contents.actim_ctrlb_1 =
	339	sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
	340	sdrc_block_contents.rfr_ctrl_1 =
	341	sdrc_read_reg(SDRC_RFR_CTRL_1);
	342	sdrc_block_contents.dcdl_1_ctrl = 0x0;
	343	sdrc_block_contents.dcdl_2_ctrl = 0x0;
	344	sdrc_block_contents.flags = 0x0;
	345	sdrc_block_contents.block_size = 0x0;
	346
	347	arm_context_addr = virt_to_phys(omap3_arm_context);
	348
	349	/* Copy all the contents to the scratchpad location */
	350	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
	351	memcpy_toio(scratchpad_address, &scratchpad_contents,
	352	sizeof(scratchpad_contents));
	353	/* Scratchpad contents being 32 bits, a divide by 4 done here */
	354	memcpy_toio(scratchpad_address +
	355	scratchpad_contents.prcm_block_offset,
	356	&prcm_block_contents, sizeof(prcm_block_contents));
	357	memcpy_toio(scratchpad_address +
	358	scratchpad_contents.sdrc_block_offset,
	359	&sdrc_block_contents, sizeof(sdrc_block_contents));
	360	/*
	361	* Copies the address of the location in SDRAM where ARM
	362	* registers get saved during a MPU OFF transition.
	363	*/
	364	memcpy_toio(scratchpad_address +
	365	scratchpad_contents.sdrc_block_offset +
	366	sizeof(sdrc_block_contents), &arm_context_addr, 4);
	367	}
	368
c96631e1 RN	369	void omap3_control_save_context(void)
	370	{
	371	control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
	372	control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
	373	control_context.mem_dftrw0 =
	374	omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
	375	control_context.mem_dftrw1 =
	376	omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
	377	control_context.msuspendmux_0 =
	378	omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
	379	control_context.msuspendmux_1 =
	380	omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
	381	control_context.msuspendmux_2 =
	382	omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
	383	control_context.msuspendmux_3 =
	384	omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
	385	control_context.msuspendmux_4 =
	386	omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
	387	control_context.msuspendmux_5 =
	388	omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
	389	control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
	390	control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
	391	control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
	392	control_context.iva2_bootaddr =
	393	omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
	394	control_context.iva2_bootmod =
	395	omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
	396	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
	397	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
	398	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
	399	control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
	400	control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
	401	control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
	402	control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
	403	control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
	404	control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
	405	control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
	406	control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
	407	control_context.dss_dpll_spreading =
	408	omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
	409	control_context.core_dpll_spreading =
	410	omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
	411	control_context.per_dpll_spreading =
	412	omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
	413	control_context.usbhost_dpll_spreading =
	414	omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
	415	control_context.pbias_lite =
	416	omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
	417	control_context.temp_sensor =
	418	omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
	419	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
	420	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
	421	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
	422	return;
	423	}
	424
	425	void omap3_control_restore_context(void)
	426	{
	427	omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
	428	omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
	429	omap_ctrl_writel(control_context.mem_dftrw0,
	430	OMAP343X_CONTROL_MEM_DFTRW0);
	431	omap_ctrl_writel(control_context.mem_dftrw1,
	432	OMAP343X_CONTROL_MEM_DFTRW1);
433	omap_ctrl_writel(control_context.msuspendmux_0,
434	OMAP2_CONTROL_MSUSPENDMUX_0);
435	omap_ctrl_writel(control_context.msuspendmux_1,
436	OMAP2_CONTROL_MSUSPENDMUX_1);
437	omap_ctrl_writel(control_context.msuspendmux_2,
438	OMAP2_CONTROL_MSUSPENDMUX_2);
439	omap_ctrl_writel(control_context.msuspendmux_3,
440	OMAP2_CONTROL_MSUSPENDMUX_3);
441	omap_ctrl_writel(control_context.msuspendmux_4,
442	OMAP2_CONTROL_MSUSPENDMUX_4);
443	omap_ctrl_writel(control_context.msuspendmux_5,
444	OMAP2_CONTROL_MSUSPENDMUX_5);
445	omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
446	omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
447	omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
448	omap_ctrl_writel(control_context.iva2_bootaddr,
449	OMAP343X_CONTROL_IVA2_BOOTADDR);
450	omap_ctrl_writel(control_context.iva2_bootmod,
451	OMAP343X_CONTROL_IVA2_BOOTMOD);
452	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
453	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
454	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
455	omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
456	omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
457	omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
458	omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
459	omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
460	omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
461	omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
462	omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
463	omap_ctrl_writel(control_context.dss_dpll_spreading,
464	OMAP343X_CONTROL_DSS_DPLL_SPREADING);
465	omap_ctrl_writel(control_context.core_dpll_spreading,
466	OMAP343X_CONTROL_CORE_DPLL_SPREADING);
467	omap_ctrl_writel(control_context.per_dpll_spreading,
468	OMAP343X_CONTROL_PER_DPLL_SPREADING);
469	omap_ctrl_writel(control_context.usbhost_dpll_spreading,
470	OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
471	omap_ctrl_writel(control_context.pbias_lite,
472	OMAP343X_CONTROL_PBIAS_LITE);
473	omap_ctrl_writel(control_context.temp_sensor,
474	OMAP343X_CONTROL_TEMP_SENSOR);
475	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
476	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
477	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
478	return;
479	}
458e999e NM	480
	481	void omap3630_ctrl_disable_rta(void)
	482	{
	483	if (!cpu_is_omap3630())
	484	return;
	485	omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
	486	}
	487
c96631e1	488	#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */