[deliverable/linux.git] / arch / arm / mach-omap2 / mux.h

/*
 * Copyright (C) 2009 Nokia
 * Copyright (C) 2009-2010 Texas Instruments
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include "mux34xx.h"

#define OMAP_MUX_TERMINATOR	0xffff

/* 34xx mux mode options for each pin. See TRM for options */
#define OMAP_MUX_MODE0      0
#define OMAP_MUX_MODE1      1
#define OMAP_MUX_MODE2      2
#define OMAP_MUX_MODE3      3
#define OMAP_MUX_MODE4      4
#define OMAP_MUX_MODE5      5
#define OMAP_MUX_MODE6      6
#define OMAP_MUX_MODE7      7

/* 24xx/34xx mux bit defines */
#define OMAP_PULL_ENA			(1 << 3)
#define OMAP_PULL_UP			(1 << 4)
#define OMAP_ALTELECTRICALSEL		(1 << 5)

/* omap3/4/5 specific mux bit defines */
#define OMAP_INPUT_EN			(1 << 8)
#define OMAP_OFF_EN			(1 << 9)
#define OMAP_OFFOUT_EN			(1 << 10)
#define OMAP_OFFOUT_VAL			(1 << 11)
#define OMAP_OFF_PULL_EN		(1 << 12)
#define OMAP_OFF_PULL_UP		(1 << 13)
#define OMAP_WAKEUP_EN			(1 << 14)
#define OMAP_WAKEUP_EVENT		(1 << 15)

/* Active pin states */
#define OMAP_PIN_OUTPUT			0
#define OMAP_PIN_INPUT			OMAP_INPUT_EN
#define OMAP_PIN_INPUT_PULLUP		(OMAP_PULL_ENA | OMAP_INPUT_EN \
						| OMAP_PULL_UP)
#define OMAP_PIN_INPUT_PULLDOWN		(OMAP_PULL_ENA | OMAP_INPUT_EN)

/* Off mode states */
#define OMAP_PIN_OFF_NONE		0
#define OMAP_PIN_OFF_OUTPUT_HIGH	(OMAP_OFF_EN | OMAP_OFFOUT_EN \
						| OMAP_OFFOUT_VAL)
#define OMAP_PIN_OFF_OUTPUT_LOW		(OMAP_OFF_EN | OMAP_OFFOUT_EN)
#define OMAP_PIN_OFF_INPUT_PULLUP	(OMAP_OFF_EN | OMAP_OFF_PULL_EN \
						| OMAP_OFF_PULL_UP)
#define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
#define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN

#define OMAP_MODE_GPIO(partition, x)	(((x) & OMAP_MUX_MODE7) == \
					  partition->gpio)
#define OMAP_MODE_UART(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)

/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK		0xffff
#define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
#define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
#define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
#define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */

#define OMAP_MUX_NR_MODES		8		/* Available modes */
#define OMAP_MUX_NR_SIDES		2		/* Bottom & top */

/*
 * omap_mux_init flags definition:
 *
 * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
 *      register which includes values from 0-7.
 * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
 * The default value is 16 bits.
 */
#define OMAP_MUX_GPIO_IN_MODE0		OMAP_MUX_MODE0
#define OMAP_MUX_GPIO_IN_MODE1		OMAP_MUX_MODE1
#define OMAP_MUX_GPIO_IN_MODE2		OMAP_MUX_MODE2
#define OMAP_MUX_GPIO_IN_MODE3		OMAP_MUX_MODE3
#define OMAP_MUX_GPIO_IN_MODE4		OMAP_MUX_MODE4
#define OMAP_MUX_GPIO_IN_MODE5		OMAP_MUX_MODE5
#define OMAP_MUX_GPIO_IN_MODE6		OMAP_MUX_MODE6
#define OMAP_MUX_GPIO_IN_MODE7		OMAP_MUX_MODE7
#define OMAP_MUX_REG_8BIT		(1 << 3)

/**
 * struct omap_board_data - board specific device data
 * @id: instance id
 * @flags: additional flags for platform init code
 * @pads: array of device specific pads
 * @pads_cnt: ARRAY_SIZE() of pads
 */
struct omap_board_data {
	int			id;
	u32			flags;
	struct omap_device_pad	*pads;
	int			pads_cnt;
};

/**
 * struct mux_partition - contain partition related information
 * @name: name of the current partition
 * @flags: flags specific to this partition
 * @gpio: gpio mux mode
 * @phys: physical address
 * @size: partition size
 * @base: virtual address after ioremap
 * @muxmodes: list of nodes that belong to a partition
 * @node: list node for the partitions linked list
 */
struct omap_mux_partition {
	const char		*name;
	u32			flags;
	u32			gpio;
	u32			phys;
	u32			size;
	void __iomem		*base;
	struct list_head	muxmodes;
	struct list_head	node;
};

/**
 * struct omap_mux - data for omap mux register offset and it's value
 * @reg_offset:	mux register offset from the mux base
 * @gpio:	GPIO number
 * @muxnames:	available signal modes for a ball
 * @balls:	available balls on the package
 */
struct omap_mux {
	u16	reg_offset;
	u16	gpio;
#ifdef CONFIG_OMAP_MUX
	char	*muxnames[OMAP_MUX_NR_MODES];
#ifdef CONFIG_DEBUG_FS
	char	*balls[OMAP_MUX_NR_SIDES];
#endif
#endif
};

/**
 * struct omap_ball - data for balls on omap package
 * @reg_offset:	mux register offset from the mux base
 * @balls:	available balls on the package
 */
struct omap_ball {
	u16	reg_offset;
	char	*balls[OMAP_MUX_NR_SIDES];
};

/**
 * struct omap_board_mux - data for initializing mux registers
 * @reg_offset:	mux register offset from the mux base
 * @mux_value:	desired mux value to set
 */
struct omap_board_mux {
	u16	reg_offset;
	u16	value;
};

#define OMAP_DEVICE_PAD_REMUX		BIT(1)	/* Dynamically remux a pad,
						   needs enable, idle and off
						   values */
#define OMAP_DEVICE_PAD_WAKEUP		BIT(0)	/* Pad is wake-up capable */

/**
 * struct omap_device_pad - device specific pad configuration
 * @name:		signal name
 * @flags:		pad specific runtime flags
 * @enable:		runtime value for a pad
 * @idle:		idle value for a pad
 * @off:		off value for a pad, defaults to safe mode
 * @partition:		mux partition
 * @mux:		mux register
 */
struct omap_device_pad {
	char				*name;
	u8				flags;
	u16				enable;
	u16				idle;
	u16				off;
	struct omap_mux_partition	*partition;
	struct omap_mux			*mux;
};

struct omap_hwmod_mux_info;

#define OMAP_MUX_STATIC(signal, mode)					\
{									\
	.name	= (signal),						\
	.enable	= (mode),						\
}

#if defined(CONFIG_OMAP_MUX)

/**
 * omap_mux_init_gpio - initialize a signal based on the GPIO number
 * @gpio:		GPIO number
 * @val:		Options for the mux register value
 */
int omap_mux_init_gpio(int gpio, int val);

/**
 * omap_mux_init_signal - initialize a signal based on the signal name
 * @muxname:		Mux name in mode0_name.signal_name format
 * @val:		Options for the mux register value
 */
int omap_mux_init_signal(const char *muxname, int val);

/**
 * omap_hwmod_mux_init - initialize hwmod specific mux data
 * @bpads:		Board specific device signal names
 * @nr_pads:		Number of signal names for the device
 */
extern struct omap_hwmod_mux_info *
omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);

/**
 * omap_hwmod_mux - omap hwmod specific pin muxing
 * @hmux:		Pads for a hwmod
 * @state:		Desired _HWMOD_STATE
 *
 * Called only from omap_hwmod.c, do not use.
 */
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);

int omap_mux_get_by_name(const char *muxname,
		struct omap_mux_partition **found_partition,
		struct omap_mux **found_mux);
#else

static inline int omap_mux_get_by_name(const char *muxname,
		struct omap_mux_partition **found_partition,
		struct omap_mux **found_mux)
{
	return 0;
}

static inline int omap_mux_init_gpio(int gpio, int val)
{
	return 0;
}
static inline int omap_mux_init_signal(char *muxname, int val)
{
	return 0;
}

static inline struct omap_hwmod_mux_info *
omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
{
	return NULL;
}

static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
{
}

static struct omap_board_mux *board_mux __maybe_unused;

#endif

/**
 * omap_mux_get_gpio() - get mux register value based on GPIO number
 * @gpio:		GPIO number
 *
 */
u16 omap_mux_get_gpio(int gpio);

/**
 * omap_mux_set_gpio() - set mux register value based on GPIO number
 * @val:		New mux register value
 * @gpio:		GPIO number
 *
 */
void omap_mux_set_gpio(u16 val, int gpio);

/**
 * omap_mux_get() - get a mux partition by name
 * @name:		Name of the mux partition
 *
 */
struct omap_mux_partition *omap_mux_get(const char *name);

/**
 * omap_mux_read() - read mux register
 * @partition:		Mux partition
 * @mux_offset:		Offset of the mux register
 *
 */
u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset);

/**
 * omap_mux_write() - write mux register
 * @partition:		Mux partition
 * @val:		New mux register value
 * @mux_offset:		Offset of the mux register
 *
 * This should be only needed for dynamic remuxing of non-gpio signals.
 */
void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset);

/**
 * omap_mux_write_array() - write an array of mux registers
 * @partition:		Mux partition
 * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
 *
 * This should be only needed for dynamic remuxing of non-gpio signals.
 */
void omap_mux_write_array(struct omap_mux_partition *p,
			  struct omap_board_mux *board_mux);

/**
 * omap2420_mux_init() - initialize mux system with board specific set
 * @board_mux:		Board specific mux table
 * @flags:		OMAP package type used for the board
 */
int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);

/**
 * omap2430_mux_init() - initialize mux system with board specific set
 * @board_mux:		Board specific mux table
 * @flags:		OMAP package type used for the board
 */
int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);

/**
 * omap3_mux_init() - initialize mux system with board specific set
 * @board_mux:		Board specific mux table
 * @flags:		OMAP package type used for the board
 */
int omap3_mux_init(struct omap_board_mux *board_mux, int flags);

/**
 * omap4_mux_init() - initialize mux system with board specific set
 * @board_subset:	Board specific mux table
 * @board_wkup_subset:	Board specific mux table for wakeup instance
 * @flags:		OMAP package type used for the board
 */
int omap4_mux_init(struct omap_board_mux *board_subset,
	struct omap_board_mux *board_wkup_subset, int flags);

/**
 * omap_mux_init - private mux init function, do not call
 */
int omap_mux_init(const char *name, u32 flags,
		  u32 mux_pbase, u32 mux_size,
		  struct omap_mux *superset,
		  struct omap_mux *package_subset,
		  struct omap_board_mux *board_mux,
		  struct omap_ball *package_balls);
Commit	Line	Data
15ac7afe TL	1	/*
15ac7afe TL	2	* Copyright (C) 2009 Nokia
112485e9	3	* Copyright (C) 2009-2010 Texas Instruments
15ac7afe TL	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 as
	7	* published by the Free Software Foundation.
	8	*/
	9
ddaa912a TL	10	#include "mux34xx.h"
ddaa912a TL	11
15ac7afe TL	12	#define OMAP_MUX_TERMINATOR 0xffff
	13
	14	/* 34xx mux mode options for each pin. See TRM for options */
	15	#define OMAP_MUX_MODE0 0
	16	#define OMAP_MUX_MODE1 1
	17	#define OMAP_MUX_MODE2 2
	18	#define OMAP_MUX_MODE3 3
	19	#define OMAP_MUX_MODE4 4
	20	#define OMAP_MUX_MODE5 5
	21	#define OMAP_MUX_MODE6 6
	22	#define OMAP_MUX_MODE7 7
	23
	24	/* 24xx/34xx mux bit defines */
	25	#define OMAP_PULL_ENA (1 << 3)
	26	#define OMAP_PULL_UP (1 << 4)
	27	#define OMAP_ALTELECTRICALSEL (1 << 5)
	28
d623a0e1	29	/* omap3/4/5 specific mux bit defines */
15ac7afe TL	30	#define OMAP_INPUT_EN (1 << 8)
	31	#define OMAP_OFF_EN (1 << 9)
	32	#define OMAP_OFFOUT_EN (1 << 10)
	33	#define OMAP_OFFOUT_VAL (1 << 11)
	34	#define OMAP_OFF_PULL_EN (1 << 12)
	35	#define OMAP_OFF_PULL_UP (1 << 13)
	36	#define OMAP_WAKEUP_EN (1 << 14)
a041a52c BC	37	#define OMAP_WAKEUP_EVENT (1 << 15)
a041a52c BC	38
15ac7afe TL	39	/* Active pin states */
	40	#define OMAP_PIN_OUTPUT 0
	41	#define OMAP_PIN_INPUT OMAP_INPUT_EN
	42	#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA \| OMAP_INPUT_EN \
	43	\| OMAP_PULL_UP)
	44	#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA \| OMAP_INPUT_EN)
	45
	46	/* Off mode states */
	47	#define OMAP_PIN_OFF_NONE 0
	48	#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN \| OMAP_OFFOUT_EN \
	49	\| OMAP_OFFOUT_VAL)
	50	#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN \| OMAP_OFFOUT_EN)
	51	#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN \| OMAP_OFF_PULL_EN \
	52	\| OMAP_OFF_PULL_UP)
	53	#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN \| OMAP_OFF_PULL_EN)
	54	#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
	55
421e8450 OM	56	#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \
421e8450 OM	57	partition->gpio)
91930652	58	#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
15ac7afe	59
112485e9	60	/* Flags for omapX_mux_init */
15ac7afe	61	#define OMAP_PACKAGE_MASK 0xffff
6dd8a682 TL	62	#define OMAP_PACKAGE_CBP 6 /* 515-pin 0.40 0.50 */
	63	#define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */
	64	#define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */
	65	#define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */
15ac7afe	66
112485e9 BC	67	#define OMAP_MUX_NR_MODES 8 /* Available modes */
	68	#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */
	69
	70	/*
	71	* omap_mux_init flags definition:
	72	*
421e8450 OM	73	* OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
421e8450 OM	74	* register which includes values from 0-7.
112485e9 BC	75	* OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
112485e9 BC	76	* The default value is 16 bits.
112485e9	77	*/
421e8450 OM	78	#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0
	79	#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1
	80	#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2
	81	#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3
	82	#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4
	83	#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5
	84	#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6
	85	#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7
	86	#define OMAP_MUX_REG_8BIT (1 << 3)
112485e9	87
40e44399 TL	88	/**
	89	* struct omap_board_data - board specific device data
	90	* @id: instance id
	91	* @flags: additional flags for platform init code
	92	* @pads: array of device specific pads
	93	* @pads_cnt: ARRAY_SIZE() of pads
	94	*/
	95	struct omap_board_data {
	96	int id;
	97	u32 flags;
	98	struct omap_device_pad *pads;
	99	int pads_cnt;
	100	};
	101
112485e9 BC	102	/**
	103	* struct mux_partition - contain partition related information
	104	* @name: name of the current partition
	105	* @flags: flags specific to this partition
421e8450	106	* @gpio: gpio mux mode
112485e9 BC	107	* @phys: physical address
	108	* @size: partition size
	109	* @base: virtual address after ioremap
	110	* @muxmodes: list of nodes that belong to a partition
	111	* @node: list node for the partitions linked list
	112	*/
	113	struct omap_mux_partition {
	114	const char *name;
	115	u32 flags;
421e8450	116	u32 gpio;
112485e9 BC	117	u32 phys;
	118	u32 size;
	119	void __iomem *base;
	120	struct list_head muxmodes;
	121	struct list_head node;
	122	};
15ac7afe TL	123
	124	/**
	125	* struct omap_mux - data for omap mux register offset and it's value
	126	* @reg_offset: mux register offset from the mux base
	127	* @gpio: GPIO number
	128	* @muxnames: available signal modes for a ball
112485e9	129	* @balls: available balls on the package
15ac7afe TL	130	*/
	131	struct omap_mux {
	132	u16 reg_offset;
	133	u16 gpio;
	134	#ifdef CONFIG_OMAP_MUX
	135	char *muxnames[OMAP_MUX_NR_MODES];
	136	#ifdef CONFIG_DEBUG_FS
	137	char *balls[OMAP_MUX_NR_SIDES];
	138	#endif
	139	#endif
	140	};
	141
	142	/**
	143	* struct omap_ball - data for balls on omap package
	144	* @reg_offset: mux register offset from the mux base
	145	* @balls: available balls on the package
	146	*/
	147	struct omap_ball {
	148	u16 reg_offset;
	149	char *balls[OMAP_MUX_NR_SIDES];
	150	};
	151
	152	/**
	153	* struct omap_board_mux - data for initializing mux registers
	154	* @reg_offset: mux register offset from the mux base
	155	* @mux_value: desired mux value to set
	156	*/
	157	struct omap_board_mux {
	158	u16 reg_offset;
	159	u16 value;
	160	};
	161
9796b323 TL	162	#define OMAP_DEVICE_PAD_REMUX BIT(1) /* Dynamically remux a pad,
	163	needs enable, idle and off
	164	values */
	165	#define OMAP_DEVICE_PAD_WAKEUP BIT(0) /* Pad is wake-up capable */
	166
	167	/**
	168	* struct omap_device_pad - device specific pad configuration
	169	* @name: signal name
	170	* @flags: pad specific runtime flags
	171	* @enable: runtime value for a pad
	172	* @idle: idle value for a pad
	173	* @off: off value for a pad, defaults to safe mode
	174	* @partition: mux partition
	175	* @mux: mux register
	176	*/
	177	struct omap_device_pad {
	178	char *name;
	179	u8 flags;
	180	u16 enable;
	181	u16 idle;
	182	u16 off;
	183	struct omap_mux_partition *partition;
	184	struct omap_mux *mux;
	185	};
	186
8d9af88f TL	187	struct omap_hwmod_mux_info;
8d9af88f TL	188
8aee6039 TL	189	#define OMAP_MUX_STATIC(signal, mode) \
	190	{ \
	191	.name = (signal), \
	192	.enable = (mode), \
	193	}
	194
ac3dbeef	195	#if defined(CONFIG_OMAP_MUX)
15ac7afe TL	196
	197	/**
	198	* omap_mux_init_gpio - initialize a signal based on the GPIO number
	199	* @gpio: GPIO number
	200	* @val: Options for the mux register value
	201	*/
	202	int omap_mux_init_gpio(int gpio, int val);
	203
	204	/**
	205	* omap_mux_init_signal - initialize a signal based on the signal name
	206	* @muxname: Mux name in mode0_name.signal_name format
	207	* @val: Options for the mux register value
	208	*/
5a3b2f7a	209	int omap_mux_init_signal(const char *muxname, int val);
15ac7afe	210
9796b323 TL	211	/**
	212	* omap_hwmod_mux_init - initialize hwmod specific mux data
	213	* @bpads: Board specific device signal names
	214	* @nr_pads: Number of signal names for the device
	215	*/
	216	extern struct omap_hwmod_mux_info *
	217	omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
	218
8d9af88f TL	219	/**
	220	* omap_hwmod_mux - omap hwmod specific pin muxing
	221	* @hmux: Pads for a hwmod
	222	* @state: Desired _HWMOD_STATE
	223	*
	224	* Called only from omap_hwmod.c, do not use.
	225	*/
	226	void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
	227
91930652 G	228	int omap_mux_get_by_name(const char *muxname,
	229	struct omap_mux_partition **found_partition,
	230	struct omap_mux **found_mux);
15ac7afe TL	231	#else
15ac7afe TL	232
91930652 G	233	static inline int omap_mux_get_by_name(const char *muxname,
	234	struct omap_mux_partition **found_partition,
	235	struct omap_mux **found_mux)
	236	{
	237	return 0;
	238	}
	239
15ac7afe TL	240	static inline int omap_mux_init_gpio(int gpio, int val)
	241	{
	242	return 0;
	243	}
	244	static inline int omap_mux_init_signal(char *muxname, int val)
	245	{
	246	return 0;
	247	}
	248
9796b323 TL	249	static inline struct omap_hwmod_mux_info *
	250	omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
	251	{
	252	return NULL;
	253	}
	254
8d9af88f TL	255	static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
	256	{
	257	}
	258
cc4915d8	259	static struct omap_board_mux *board_mux __maybe_unused;
7203f8a4	260
15ac7afe TL	261	#endif
	262
	263	/**
	264	* omap_mux_get_gpio() - get mux register value based on GPIO number
	265	* @gpio: GPIO number
	266	*
	267	*/
	268	u16 omap_mux_get_gpio(int gpio);
	269
	270	/**
	271	* omap_mux_set_gpio() - set mux register value based on GPIO number
	272	* @val: New mux register value
	273	* @gpio: GPIO number
	274	*
	275	*/
	276	void omap_mux_set_gpio(u16 val, int gpio);
	277
112485e9 BC	278	/**
	279	* omap_mux_get() - get a mux partition by name
	280	* @name: Name of the mux partition
	281	*
	282	*/
	283	struct omap_mux_partition omap_mux_get(const char name);
	284
d4bb72e5 TL	285	/**
d4bb72e5 TL	286	* omap_mux_read() - read mux register
112485e9	287	* @partition: Mux partition
d4bb72e5 TL	288	* @mux_offset: Offset of the mux register
	289	*
	290	*/
112485e9	291	u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset);
d4bb72e5 TL	292
	293	/**
	294	* omap_mux_write() - write mux register
112485e9	295	* @partition: Mux partition
d4bb72e5 TL	296	* @val: New mux register value
	297	* @mux_offset: Offset of the mux register
	298	*
	299	* This should be only needed for dynamic remuxing of non-gpio signals.
	300	*/
112485e9	301	void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset);
d4bb72e5 TL	302
	303	/**
	304	* omap_mux_write_array() - write an array of mux registers
112485e9	305	* @partition: Mux partition
d4bb72e5 TL	306	* @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR
	307	*
	308	* This should be only needed for dynamic remuxing of non-gpio signals.
	309	*/
112485e9 BC	310	void omap_mux_write_array(struct omap_mux_partition *p,
112485e9 BC	311	struct omap_board_mux *board_mux);
d4bb72e5	312
fc440461 TL	313	/**
	314	* omap2420_mux_init() - initialize mux system with board specific set
	315	* @board_mux: Board specific mux table
	316	* @flags: OMAP package type used for the board
	317	*/
	318	int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
	319
89ba1092 TL	320	/**
	321	* omap2430_mux_init() - initialize mux system with board specific set
	322	* @board_mux: Board specific mux table
	323	* @flags: OMAP package type used for the board
	324	*/
	325	int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
	326
15ac7afe TL	327	/**
	328	* omap3_mux_init() - initialize mux system with board specific set
	329	* @board_mux: Board specific mux table
	330	* @flags: OMAP package type used for the board
	331	*/
	332	int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
	333
a041a52c BC	334	/**
a041a52c BC	335	* omap4_mux_init() - initialize mux system with board specific set
21a42c92 CC	336	* @board_subset: Board specific mux table
21a42c92 CC	337	* @board_wkup_subset: Board specific mux table for wakeup instance
a041a52c BC	338	* @flags: OMAP package type used for the board
a041a52c BC	339	*/
21a42c92 CC	340	int omap4_mux_init(struct omap_board_mux *board_subset,
21a42c92 CC	341	struct omap_board_mux *board_wkup_subset, int flags);
a041a52c	342
15ac7afe TL	343	/**
	344	* omap_mux_init - private mux init function, do not call
	345	*/
112485e9 BC	346	int omap_mux_init(const char *name, u32 flags,
	347	u32 mux_pbase, u32 mux_size,
	348	struct omap_mux *superset,
	349	struct omap_mux *package_subset,
	350	struct omap_board_mux *board_mux,
	351	struct omap_ball *package_balls);
	352