Merge tag 'stable/for-linus-3.16-rc7-tag' of git://git.kernel.org/pub/scm/linux/kerne...
[deliverable/linux.git] / arch / arm / mach-omap2 / omap-headsmp.S
CommitLineData
367cd31e
SS
1/*
2 * Secondary CPU startup routine source file.
3 *
da0159fd 4 * Copyright (C) 2009-2014 Texas Instruments, Inc.
367cd31e
SS
5 *
6 * Author:
7 * Santosh Shilimkar <santosh.shilimkar@ti.com>
8 *
9 * Interface functions needed for the SMP. This file is based on arm
10 * realview smp platform.
11 * Copyright (c) 2003 ARM Limited.
12 *
13 * This program is free software,you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 */
17
18#include <linux/linkage.h>
19#include <linux/init.h>
20
ff999b8a
SS
21#include "omap44xx.h"
22
283f708c
SS
23/* Physical address needed since MMU not enabled yet on secondary core */
24#define AUX_CORE_BOOT0_PA 0x48281800
25
26/*
27 * OMAP5 specific entry point for secondary CPU to jump from ROM
28 * code. This routine also provides a holding flag into which
29 * secondary core is held until we're ready for it to initialise.
30 * The primary core will update this flag using a hardware
da0159fd 31 * register AuxCoreBoot0.
283f708c
SS
32 */
33ENTRY(omap5_secondary_startup)
34wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
35 ldr r0, [r2]
36 mov r0, r0, lsr #5
37 mrc p15, 0, r4, c0, c0, 5
38 and r4, r4, #0x0f
39 cmp r0, r4
40 bne wait
41 b secondary_startup
55fde31c 42ENDPROC(omap5_secondary_startup)
367cd31e
SS
43/*
44 * OMAP4 specific entry point for secondary CPU to jump from ROM
45 * code. This routine also provides a holding flag into which
46 * secondary core is held until we're ready for it to initialise.
942e2c9e
SS
47 * The primary core will update this flag using a hardware
48 * register AuxCoreBoot0.
367cd31e 49 */
baf4b7d3 50ENTRY(omap4_secondary_startup)
942e2c9e
SS
51hold: ldr r12,=0x103
52 dsb
df571c4a 53 smc #0 @ read from AuxCoreBoot0
942e2c9e
SS
54 mov r0, r0, lsr #9
55 mrc p15, 0, r4, c0, c0, 5
56 and r4, r4, #0x0f
57 cmp r0, r4
367cd31e
SS
58 bne hold
59
60 /*
942e2c9e 61 * we've been released from the wait loop,secondary_stack
367cd31e
SS
62 * should now contain the SVC stack for this core
63 */
64 b secondary_startup
baf4b7d3 65ENDPROC(omap4_secondary_startup)
367cd31e 66
baf4b7d3 67ENTRY(omap4460_secondary_startup)
ff999b8a
SS
68hold_2: ldr r12,=0x103
69 dsb
70 smc #0 @ read from AuxCoreBoot0
71 mov r0, r0, lsr #9
72 mrc p15, 0, r4, c0, c0, 5
73 and r4, r4, #0x0f
74 cmp r0, r4
75 bne hold_2
76
77 /*
78 * GIC distributor control register has changed between
79 * CortexA9 r1pX and r2pX. The Control Register secure
80 * banked version is now composed of 2 bits:
81 * bit 0 == Secure Enable
82 * bit 1 == Non-Secure Enable
83 * The Non-Secure banked register has not changed
84 * Because the ROM Code is based on the r1pX GIC, the CPU1
85 * GIC restoration will cause a problem to CPU0 Non-Secure SW.
86 * The workaround must be:
87 * 1) Before doing the CPU1 wakeup, CPU0 must disable
88 * the GIC distributor
89 * 2) CPU1 must re-enable the GIC distributor on
90 * it's wakeup path.
91 */
92 ldr r1, =OMAP44XX_GIC_DIST_BASE
93 ldr r0, [r1]
94 orr r0, #1
95 str r0, [r1]
96
97 /*
98 * we've been released from the wait loop,secondary_stack
99 * should now contain the SVC stack for this core
100 */
101 b secondary_startup
baf4b7d3 102ENDPROC(omap4460_secondary_startup)
This page took 0.290469 seconds and 5 git commands to generate.