Commit | Line | Data |
---|---|---|
63c85238 PW |
1 | /* |
2 | * omap_hwmod macros, structures | |
3 | * | |
550c8092 | 4 | * Copyright (C) 2009-2011 Nokia Corporation |
e6d3a8b0 | 5 | * Copyright (C) 2011-2012 Texas Instruments, Inc. |
63c85238 PW |
6 | * Paul Walmsley |
7 | * | |
43b40992 | 8 | * Created in collaboration with (alphabetical order): Benoît Cousson, |
63c85238 PW |
9 | * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari |
10 | * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License version 2 as | |
14 | * published by the Free Software Foundation. | |
15 | * | |
16 | * These headers and macros are used to define OMAP on-chip module | |
17 | * data and their integration with other OMAP modules and Linux. | |
74ff3a68 PW |
18 | * Copious documentation and references can also be found in the |
19 | * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this | |
20 | * writing). | |
63c85238 PW |
21 | * |
22 | * To do: | |
23 | * - add interconnect error log structures | |
24 | * - add pinmuxing | |
25 | * - init_conn_id_bit (CONNID_BIT_VECTOR) | |
26 | * - implement default hwmod SMS/SDRC flags? | |
b56b7bc8 | 27 | * - move Linux-specific data ("non-ROM data") out |
63c85238 PW |
28 | * |
29 | */ | |
30 | #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H | |
31 | #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H | |
32 | ||
33 | #include <linux/kernel.h> | |
a2debdbd | 34 | #include <linux/init.h> |
358f0e63 | 35 | #include <linux/list.h> |
63c85238 | 36 | #include <linux/ioport.h> |
dc6d1cda | 37 | #include <linux/spinlock.h> |
63c85238 PW |
38 | |
39 | struct omap_device; | |
40 | ||
358f0e63 TG |
41 | extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; |
42 | extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; | |
248b3b3d | 43 | extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; |
358f0e63 TG |
44 | |
45 | /* | |
46 | * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant | |
47 | * with the original PRCM protocol defined for OMAP2420 | |
48 | */ | |
49 | #define SYSC_TYPE1_MIDLEMODE_SHIFT 12 | |
4ce107cc | 50 | #define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) |
358f0e63 | 51 | #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 |
4ce107cc | 52 | #define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) |
358f0e63 | 53 | #define SYSC_TYPE1_SIDLEMODE_SHIFT 3 |
4ce107cc | 54 | #define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) |
358f0e63 | 55 | #define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 |
4ce107cc | 56 | #define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) |
358f0e63 | 57 | #define SYSC_TYPE1_SOFTRESET_SHIFT 1 |
4ce107cc | 58 | #define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) |
358f0e63 | 59 | #define SYSC_TYPE1_AUTOIDLE_SHIFT 0 |
4ce107cc | 60 | #define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) |
358f0e63 TG |
61 | |
62 | /* | |
63 | * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant | |
64 | * with the new PRCM protocol defined for new OMAP4 IPs. | |
65 | */ | |
66 | #define SYSC_TYPE2_SOFTRESET_SHIFT 0 | |
67 | #define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT) | |
68 | #define SYSC_TYPE2_SIDLEMODE_SHIFT 2 | |
69 | #define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) | |
70 | #define SYSC_TYPE2_MIDLEMODE_SHIFT 4 | |
71 | #define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) | |
6668546f KVA |
72 | #define SYSC_TYPE2_DMADISABLE_SHIFT 16 |
73 | #define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) | |
63c85238 | 74 | |
248b3b3d VH |
75 | /* |
76 | * OCP SYSCONFIG bit shifts/masks TYPE3. | |
77 | * This is applicable for some IPs present in AM33XX | |
78 | */ | |
79 | #define SYSC_TYPE3_SIDLEMODE_SHIFT 0 | |
80 | #define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) | |
81 | #define SYSC_TYPE3_MIDLEMODE_SHIFT 2 | |
82 | #define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) | |
63c85238 PW |
83 | |
84 | /* OCP SYSSTATUS bit shifts/masks */ | |
85 | #define SYSS_RESETDONE_SHIFT 0 | |
86 | #define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) | |
87 | ||
88 | /* Master standby/slave idle mode flags */ | |
89 | #define HWMOD_IDLEMODE_FORCE (1 << 0) | |
90 | #define HWMOD_IDLEMODE_NO (1 << 1) | |
91 | #define HWMOD_IDLEMODE_SMART (1 << 2) | |
86009eb3 | 92 | #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) |
63c85238 | 93 | |
03fdefe5 BC |
94 | /* modulemode control type (SW or HW) */ |
95 | #define MODULEMODE_HWCTRL 1 | |
96 | #define MODULEMODE_SWCTRL 2 | |
97 | ||
98 | ||
9796b323 TL |
99 | /** |
100 | * struct omap_hwmod_mux_info - hwmod specific mux configuration | |
101 | * @pads: array of omap_device_pad entries | |
102 | * @nr_pads: number of omap_device_pad entries | |
103 | * | |
104 | * Note that this is currently built during init as needed. | |
105 | */ | |
106 | struct omap_hwmod_mux_info { | |
107 | int nr_pads; | |
108 | struct omap_device_pad *pads; | |
029268e4 TL |
109 | int nr_pads_dynamic; |
110 | struct omap_device_pad **pads_dynamic; | |
13a3fe52 | 111 | int *irqs; |
029268e4 | 112 | bool enabled; |
9796b323 TL |
113 | }; |
114 | ||
63c85238 | 115 | /** |
718bfd76 PW |
116 | * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod |
117 | * @name: name of the IRQ channel (module local name) | |
212738a4 | 118 | * @irq: IRQ channel ID (should be non-negative except -1 = terminator) |
718bfd76 PW |
119 | * |
120 | * @name should be something short, e.g., "tx" or "rx". It is for use | |
121 | * by platform_get_resource_byname(). It is defined locally to the | |
122 | * hwmod. | |
123 | */ | |
124 | struct omap_hwmod_irq_info { | |
125 | const char *name; | |
212738a4 | 126 | s16 irq; |
718bfd76 PW |
127 | }; |
128 | ||
129 | /** | |
130 | * struct omap_hwmod_dma_info - DMA channels used by the hwmod | |
63c85238 | 131 | * @name: name of the DMA channel (module local name) |
bc614958 | 132 | * @dma_req: DMA request ID (should be non-negative except -1 = terminator) |
63c85238 PW |
133 | * |
134 | * @name should be something short, e.g., "tx" or "rx". It is for use | |
135 | * by platform_get_resource_byname(). It is defined locally to the | |
136 | * hwmod. | |
137 | */ | |
138 | struct omap_hwmod_dma_info { | |
139 | const char *name; | |
bc614958 | 140 | s16 dma_req; |
63c85238 PW |
141 | }; |
142 | ||
5365efbe BC |
143 | /** |
144 | * struct omap_hwmod_rst_info - IPs reset lines use by hwmod | |
145 | * @name: name of the reset line (module local name) | |
146 | * @rst_shift: Offset of the reset bit | |
cc1226e7 | 147 | * @st_shift: Offset of the reset status bit (OMAP2/3 only) |
5365efbe BC |
148 | * |
149 | * @name should be something short, e.g., "cpu0" or "rst". It is defined | |
150 | * locally to the hwmod. | |
151 | */ | |
152 | struct omap_hwmod_rst_info { | |
153 | const char *name; | |
154 | u8 rst_shift; | |
cc1226e7 | 155 | u8 st_shift; |
5365efbe BC |
156 | }; |
157 | ||
63c85238 PW |
158 | /** |
159 | * struct omap_hwmod_opt_clk - optional clocks used by this hwmod | |
160 | * @role: "sys", "32k", "tv", etc -- for use in clk_get() | |
50ebdac2 | 161 | * @clk: opt clock: OMAP clock name |
63c85238 PW |
162 | * @_clk: pointer to the struct clk (filled in at runtime) |
163 | * | |
164 | * The module's interface clock and main functional clock should not | |
165 | * be added as optional clocks. | |
166 | */ | |
167 | struct omap_hwmod_opt_clk { | |
168 | const char *role; | |
50ebdac2 | 169 | const char *clk; |
63c85238 PW |
170 | struct clk *_clk; |
171 | }; | |
172 | ||
173 | ||
174 | /* omap_hwmod_omap2_firewall.flags bits */ | |
175 | #define OMAP_FIREWALL_L3 (1 << 0) | |
176 | #define OMAP_FIREWALL_L4 (1 << 1) | |
177 | ||
178 | /** | |
179 | * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data | |
180 | * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* | |
181 | * @l4_fw_region: L4 firewall region ID | |
182 | * @l4_prot_group: L4 protection group ID | |
183 | * @flags: (see omap_hwmod_omap2_firewall.flags macros above) | |
184 | */ | |
185 | struct omap_hwmod_omap2_firewall { | |
186 | u8 l3_perm_bit; | |
187 | u8 l4_fw_region; | |
188 | u8 l4_prot_group; | |
189 | u8 flags; | |
190 | }; | |
191 | ||
192 | ||
193 | /* | |
194 | * omap_hwmod_addr_space.flags bits | |
195 | * | |
196 | * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. | |
197 | * ADDR_TYPE_RT: Address space contains module register target data. | |
198 | */ | |
b56b7bc8 | 199 | #define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */ |
63c85238 PW |
200 | #define ADDR_TYPE_RT (1 << 1) |
201 | ||
202 | /** | |
cd503802 KVA |
203 | * struct omap_hwmod_addr_space - address space handled by the hwmod |
204 | * @name: name of the address space | |
63c85238 PW |
205 | * @pa_start: starting physical address |
206 | * @pa_end: ending physical address | |
207 | * @flags: (see omap_hwmod_addr_space.flags macros above) | |
208 | * | |
209 | * Address space doesn't necessarily follow physical interconnect | |
210 | * structure. GPMC is one example. | |
211 | */ | |
212 | struct omap_hwmod_addr_space { | |
cd503802 | 213 | const char *name; |
63c85238 PW |
214 | u32 pa_start; |
215 | u32 pa_end; | |
216 | u8 flags; | |
217 | }; | |
218 | ||
219 | ||
220 | /* | |
221 | * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this | |
222 | * interface to interact with the hwmod. Used to add sleep dependencies | |
223 | * when the module is enabled or disabled. | |
224 | */ | |
225 | #define OCP_USER_MPU (1 << 0) | |
226 | #define OCP_USER_SDMA (1 << 1) | |
3d10f0d6 | 227 | #define OCP_USER_DSP (1 << 2) |
42b9e387 | 228 | #define OCP_USER_IVA (1 << 3) |
63c85238 PW |
229 | |
230 | /* omap_hwmod_ocp_if.flags bits */ | |
33f7ec81 BC |
231 | #define OCPIF_SWSUP_IDLE (1 << 0) |
232 | #define OCPIF_CAN_BURST (1 << 1) | |
63c85238 | 233 | |
2221b5cd PW |
234 | /* omap_hwmod_ocp_if._int_flags possibilities */ |
235 | #define _OCPIF_INT_FLAGS_REGISTERED (1 << 0) | |
236 | ||
237 | ||
63c85238 PW |
238 | /** |
239 | * struct omap_hwmod_ocp_if - OCP interface data | |
240 | * @master: struct omap_hwmod that initiates OCP transactions on this link | |
241 | * @slave: struct omap_hwmod that responds to OCP transactions on this link | |
242 | * @addr: address space associated with this link | |
50ebdac2 | 243 | * @clk: interface clock: OMAP clock name |
63c85238 PW |
244 | * @_clk: pointer to the interface struct clk (filled in at runtime) |
245 | * @fw: interface firewall data | |
63c85238 | 246 | * @width: OCP data width |
63c85238 PW |
247 | * @user: initiators using this interface (see OCP_USER_* macros above) |
248 | * @flags: OCP interface flags (see OCPIF_* macros above) | |
2221b5cd | 249 | * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above) |
63c85238 PW |
250 | * |
251 | * It may also be useful to add a tag_cnt field for OCP2.x devices. | |
252 | * | |
253 | * Parameter names beginning with an underscore are managed internally by | |
254 | * the omap_hwmod code and should not be set during initialization. | |
255 | */ | |
256 | struct omap_hwmod_ocp_if { | |
257 | struct omap_hwmod *master; | |
258 | struct omap_hwmod *slave; | |
259 | struct omap_hwmod_addr_space *addr; | |
50ebdac2 | 260 | const char *clk; |
63c85238 PW |
261 | struct clk *_clk; |
262 | union { | |
263 | struct omap_hwmod_omap2_firewall omap2; | |
264 | } fw; | |
63c85238 | 265 | u8 width; |
63c85238 PW |
266 | u8 user; |
267 | u8 flags; | |
2221b5cd | 268 | u8 _int_flags; |
63c85238 PW |
269 | }; |
270 | ||
271 | ||
272 | /* Macros for use in struct omap_hwmod_sysconfig */ | |
273 | ||
274 | /* Flags for use in omap_hwmod_sysconfig.idlemodes */ | |
86009eb3 | 275 | #define MASTER_STANDBY_SHIFT 4 |
63c85238 PW |
276 | #define SLAVE_IDLE_SHIFT 0 |
277 | #define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) | |
278 | #define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) | |
279 | #define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) | |
86009eb3 | 280 | #define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT) |
63c85238 PW |
281 | #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) |
282 | #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) | |
283 | #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) | |
724019b0 | 284 | #define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) |
63c85238 PW |
285 | |
286 | /* omap_hwmod_sysconfig.sysc_flags capability flags */ | |
287 | #define SYSC_HAS_AUTOIDLE (1 << 0) | |
288 | #define SYSC_HAS_SOFTRESET (1 << 1) | |
289 | #define SYSC_HAS_ENAWAKEUP (1 << 2) | |
290 | #define SYSC_HAS_EMUFREE (1 << 3) | |
291 | #define SYSC_HAS_CLOCKACTIVITY (1 << 4) | |
292 | #define SYSC_HAS_SIDLEMODE (1 << 5) | |
293 | #define SYSC_HAS_MIDLEMODE (1 << 6) | |
2cb06814 | 294 | #define SYSS_HAS_RESET_STATUS (1 << 7) |
883edfdd | 295 | #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ |
2cb06814 | 296 | #define SYSC_HAS_RESET_STATUS (1 << 9) |
6668546f | 297 | #define SYSC_HAS_DMADISABLE (1 << 10) |
63c85238 PW |
298 | |
299 | /* omap_hwmod_sysconfig.clockact flags */ | |
300 | #define CLOCKACT_TEST_BOTH 0x0 | |
301 | #define CLOCKACT_TEST_MAIN 0x1 | |
302 | #define CLOCKACT_TEST_ICLK 0x2 | |
303 | #define CLOCKACT_TEST_NONE 0x3 | |
304 | ||
358f0e63 TG |
305 | /** |
306 | * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets. | |
307 | * @midle_shift: Offset of the midle bit | |
308 | * @clkact_shift: Offset of the clockactivity bit | |
309 | * @sidle_shift: Offset of the sidle bit | |
310 | * @enwkup_shift: Offset of the enawakeup bit | |
311 | * @srst_shift: Offset of the softreset bit | |
43b40992 | 312 | * @autoidle_shift: Offset of the autoidle bit |
6668546f | 313 | * @dmadisable_shift: Offset of the dmadisable bit |
358f0e63 TG |
314 | */ |
315 | struct omap_hwmod_sysc_fields { | |
316 | u8 midle_shift; | |
317 | u8 clkact_shift; | |
318 | u8 sidle_shift; | |
319 | u8 enwkup_shift; | |
320 | u8 srst_shift; | |
321 | u8 autoidle_shift; | |
6668546f | 322 | u8 dmadisable_shift; |
358f0e63 TG |
323 | }; |
324 | ||
63c85238 | 325 | /** |
43b40992 | 326 | * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data |
63c85238 PW |
327 | * @rev_offs: IP block revision register offset (from module base addr) |
328 | * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) | |
329 | * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) | |
d99de7f5 | 330 | * @srst_udelay: Delay needed after doing a softreset in usecs |
63c85238 PW |
331 | * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} |
332 | * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported | |
333 | * @clockact: the default value of the module CLOCKACTIVITY bits | |
334 | * | |
335 | * @clockact describes to the module which clocks are likely to be | |
336 | * disabled when the PRCM issues its idle request to the module. Some | |
337 | * modules have separate clockdomains for the interface clock and main | |
338 | * functional clock, and can check whether they should acknowledge the | |
339 | * idle request based on the internal module functionality that has | |
340 | * been associated with the clocks marked in @clockact. This field is | |
341 | * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) | |
342 | * | |
358f0e63 TG |
343 | * @sysc_fields: structure containing the offset positions of various bits in |
344 | * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or | |
345 | * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on | |
346 | * whether the device ip is compliant with the original PRCM protocol | |
43b40992 PW |
347 | * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs. |
348 | * If the device follows a different scheme for the sysconfig register , | |
358f0e63 | 349 | * then this field has to be populated with the correct offset structure. |
63c85238 | 350 | */ |
43b40992 | 351 | struct omap_hwmod_class_sysconfig { |
515237d6 PW |
352 | u32 rev_offs; |
353 | u32 sysc_offs; | |
354 | u32 syss_offs; | |
56dc79ab | 355 | u16 sysc_flags; |
d99de7f5 FGL |
356 | struct omap_hwmod_sysc_fields *sysc_fields; |
357 | u8 srst_udelay; | |
63c85238 | 358 | u8 idlemodes; |
63c85238 PW |
359 | u8 clockact; |
360 | }; | |
361 | ||
362 | /** | |
363 | * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data | |
364 | * @module_offs: PRCM submodule offset from the start of the PRM/CM | |
365 | * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) | |
366 | * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs | |
367 | * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) | |
368 | * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit | |
369 | * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit | |
370 | * | |
371 | * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, | |
372 | * WKEN, GRPSEL registers. In an ideal world, no extra information | |
373 | * would be needed for IDLEST information, but alas, there are some | |
374 | * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit | |
375 | * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) | |
376 | */ | |
377 | struct omap_hwmod_omap2_prcm { | |
378 | s16 module_offs; | |
379 | u8 prcm_reg_id; | |
380 | u8 module_bit; | |
381 | u8 idlest_reg_id; | |
382 | u8 idlest_idle_bit; | |
383 | u8 idlest_stdby_bit; | |
384 | }; | |
385 | ||
46b3af27 TK |
386 | /* |
387 | * Possible values for struct omap_hwmod_omap4_prcm.flags | |
388 | * | |
389 | * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM | |
390 | * module-level context loss register associated with them; this | |
391 | * flag bit should be set in those cases | |
392 | */ | |
393 | #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) | |
63c85238 PW |
394 | |
395 | /** | |
396 | * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data | |
e6d3a8b0 RN |
397 | * @clkctrl_offs: offset of the PRCM clock control register |
398 | * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM | |
399 | * @context_offs: offset of the RM_*_CONTEXT register | |
ce80979a | 400 | * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register |
768c69f5 | 401 | * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM |
63c85238 | 402 | * @submodule_wkdep_bit: bit shift of the WKDEP range |
46b3af27 | 403 | * @flags: PRCM register capabilities for this IP block |
e6d3a8b0 RN |
404 | * @modulemode: allowable modulemodes |
405 | * @context_lost_counter: Count of module level context lost | |
ce80979a TK |
406 | * |
407 | * If @lostcontext_mask is not defined, context loss check code uses | |
408 | * whole register without masking. @lostcontext_mask should only be | |
409 | * defined in cases where @context_offs register is shared by two or | |
410 | * more hwmods. | |
63c85238 PW |
411 | */ |
412 | struct omap_hwmod_omap4_prcm { | |
d0f0631d | 413 | u16 clkctrl_offs; |
eaac329d | 414 | u16 rstctrl_offs; |
768c69f5 | 415 | u16 rstst_offs; |
27bb00b5 | 416 | u16 context_offs; |
ce80979a | 417 | u32 lostcontext_mask; |
53934aa7 | 418 | u8 submodule_wkdep_bit; |
03fdefe5 | 419 | u8 modulemode; |
46b3af27 | 420 | u8 flags; |
e6d3a8b0 | 421 | int context_lost_counter; |
63c85238 PW |
422 | }; |
423 | ||
424 | ||
425 | /* | |
426 | * omap_hwmod.flags definitions | |
427 | * | |
428 | * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out | |
429 | * of idle, rather than relying on module smart-idle | |
430 | * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out | |
431 | * of standby, rather than relying on module smart-standby | |
432 | * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for | |
b56b7bc8 | 433 | * SDRAM controller, etc. XXX probably belongs outside the main hwmod file |
550c8092 | 434 | * XXX Should be HWMOD_SETUP_NO_RESET |
63c85238 | 435 | * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM |
b56b7bc8 | 436 | * controller, etc. XXX probably belongs outside the main hwmod file |
550c8092 | 437 | * XXX Should be HWMOD_SETUP_NO_IDLE |
4d2274c5 | 438 | * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) |
726072e5 PW |
439 | * when module is enabled, rather than the default, which is to |
440 | * enable autoidle | |
63c85238 | 441 | * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup |
bd36179e | 442 | * HWMOD_NO_IDLEST: this module does not have idle status - this is the case |
33f7ec81 | 443 | * only for few initiator modules on OMAP2 & 3. |
96835af9 BC |
444 | * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. |
445 | * This is needed for devices like DSS that require optional clocks enabled | |
446 | * in order to complete the reset. Optional clocks will be disabled | |
447 | * again after the reset. | |
cc7a1d2a | 448 | * HWMOD_16BIT_REG: Module has 16bit registers |
5fb3d522 PW |
449 | * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for |
450 | * this IP block comes from an off-chip source and is not always | |
451 | * enabled. This prevents the hwmod code from being able to | |
452 | * enable and reset the IP block early. XXX Eventually it should | |
453 | * be possible to query the clock framework for this information. | |
63c85238 PW |
454 | */ |
455 | #define HWMOD_SWSUP_SIDLE (1 << 0) | |
456 | #define HWMOD_SWSUP_MSTANDBY (1 << 1) | |
457 | #define HWMOD_INIT_NO_RESET (1 << 2) | |
458 | #define HWMOD_INIT_NO_IDLE (1 << 3) | |
726072e5 PW |
459 | #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) |
460 | #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) | |
33f7ec81 | 461 | #define HWMOD_NO_IDLEST (1 << 6) |
96835af9 | 462 | #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) |
cc7a1d2a | 463 | #define HWMOD_16BIT_REG (1 << 8) |
5fb3d522 | 464 | #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) |
63c85238 PW |
465 | |
466 | /* | |
467 | * omap_hwmod._int_flags definitions | |
468 | * These are for internal use only and are managed by the omap_hwmod code. | |
469 | * | |
470 | * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module | |
471 | * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP | |
472 | * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached | |
aacf0941 RN |
473 | * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - |
474 | * causes the first call to _enable() to only update the pinmux | |
63c85238 PW |
475 | */ |
476 | #define _HWMOD_NO_MPU_PORT (1 << 0) | |
477 | #define _HWMOD_WAKEUP_ENABLED (1 << 1) | |
478 | #define _HWMOD_SYSCONFIG_LOADED (1 << 2) | |
aacf0941 | 479 | #define _HWMOD_SKIP_ENABLE (1 << 3) |
63c85238 PW |
480 | |
481 | /* | |
482 | * omap_hwmod._state definitions | |
483 | * | |
484 | * INITIALIZED: reset (optionally), initialized, enabled, disabled | |
485 | * (optionally) | |
486 | * | |
487 | * | |
488 | */ | |
489 | #define _HWMOD_STATE_UNKNOWN 0 | |
490 | #define _HWMOD_STATE_REGISTERED 1 | |
491 | #define _HWMOD_STATE_CLKS_INITED 2 | |
492 | #define _HWMOD_STATE_INITIALIZED 3 | |
493 | #define _HWMOD_STATE_ENABLED 4 | |
494 | #define _HWMOD_STATE_IDLE 5 | |
495 | #define _HWMOD_STATE_DISABLED 6 | |
496 | ||
43b40992 PW |
497 | /** |
498 | * struct omap_hwmod_class - the type of an IP block | |
499 | * @name: name of the hwmod_class | |
500 | * @sysc: device SYSCONFIG/SYSSTATUS register data | |
501 | * @rev: revision of the IP class | |
e4dc8f50 | 502 | * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown |
bd36179e | 503 | * @reset: ptr to fn to be executed in place of the standard hwmod reset fn |
43b40992 PW |
504 | * |
505 | * Represent the class of a OMAP hardware "modules" (e.g. timer, | |
506 | * smartreflex, gpio, uart...) | |
e4dc8f50 PW |
507 | * |
508 | * @pre_shutdown is a function that will be run immediately before | |
509 | * hwmod clocks are disabled, etc. It is intended for use for hwmods | |
510 | * like the MPU watchdog, which cannot be disabled with the standard | |
511 | * omap_hwmod_shutdown(). The function should return 0 upon success, | |
512 | * or some negative error upon failure. Returning an error will cause | |
513 | * omap_hwmod_shutdown() to abort the device shutdown and return an | |
514 | * error. | |
bd36179e PW |
515 | * |
516 | * If @reset is defined, then the function it points to will be | |
517 | * executed in place of the standard hwmod _reset() code in | |
518 | * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have | |
519 | * unusual reset sequences - usually processor IP blocks like the IVA. | |
43b40992 PW |
520 | */ |
521 | struct omap_hwmod_class { | |
522 | const char *name; | |
523 | struct omap_hwmod_class_sysconfig *sysc; | |
524 | u32 rev; | |
e4dc8f50 | 525 | int (*pre_shutdown)(struct omap_hwmod *oh); |
bd36179e | 526 | int (*reset)(struct omap_hwmod *oh); |
43b40992 PW |
527 | }; |
528 | ||
2221b5cd PW |
529 | /** |
530 | * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs | |
531 | * @ocp_if: OCP interface structure record pointer | |
532 | * @node: list_head pointing to next struct omap_hwmod_link in a list | |
533 | */ | |
534 | struct omap_hwmod_link { | |
535 | struct omap_hwmod_ocp_if *ocp_if; | |
536 | struct list_head node; | |
537 | }; | |
538 | ||
63c85238 PW |
539 | /** |
540 | * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) | |
541 | * @name: name of the hwmod | |
43b40992 | 542 | * @class: struct omap_hwmod_class * to the class of this hwmod |
63c85238 | 543 | * @od: struct omap_device currently associated with this hwmod (internal use) |
212738a4 | 544 | * @mpu_irqs: ptr to an array of MPU IRQs |
bc614958 | 545 | * @sdma_reqs: ptr to an array of System DMA request IDs |
63c85238 | 546 | * @prcm: PRCM data pertaining to this hwmod |
50ebdac2 | 547 | * @main_clk: main clock: OMAP clock name |
63c85238 PW |
548 | * @_clk: pointer to the main struct clk (filled in at runtime) |
549 | * @opt_clks: other device clocks that drivers can request (0..*) | |
3b92408c | 550 | * @voltdm: pointer to voltage domain (filled in at runtime) |
63c85238 PW |
551 | * @dev_attr: arbitrary device attributes that can be passed to the driver |
552 | * @_sysc_cache: internal-use hwmod flags | |
db2a60bf | 553 | * @_mpu_rt_va: cached register target start address (internal use) |
2221b5cd | 554 | * @_mpu_port: cached MPU register target slave (internal use) |
63c85238 PW |
555 | * @opt_clks_cnt: number of @opt_clks |
556 | * @master_cnt: number of @master entries | |
557 | * @slaves_cnt: number of @slave entries | |
558 | * @response_lat: device OCP response latency (in interface clock cycles) | |
559 | * @_int_flags: internal-use hwmod flags | |
560 | * @_state: internal-use hwmod state | |
2092e5cc | 561 | * @_postsetup_state: internal-use state to leave the hwmod in after _setup() |
63c85238 | 562 | * @flags: hwmod flags (documented below) |
dc6d1cda | 563 | * @_lock: spinlock serializing operations on this hwmod |
63c85238 PW |
564 | * @node: list node for hwmod list (internal use) |
565 | * | |
50ebdac2 PW |
566 | * @main_clk refers to this module's "main clock," which for our |
567 | * purposes is defined as "the functional clock needed for register | |
568 | * accesses to complete." Modules may not have a main clock if the | |
569 | * interface clock also serves as a main clock. | |
63c85238 PW |
570 | * |
571 | * Parameter names beginning with an underscore are managed internally by | |
572 | * the omap_hwmod code and should not be set during initialization. | |
2221b5cd PW |
573 | * |
574 | * @masters and @slaves are now deprecated. | |
63c85238 PW |
575 | */ |
576 | struct omap_hwmod { | |
577 | const char *name; | |
43b40992 | 578 | struct omap_hwmod_class *class; |
63c85238 | 579 | struct omap_device *od; |
9796b323 | 580 | struct omap_hwmod_mux_info *mux; |
718bfd76 | 581 | struct omap_hwmod_irq_info *mpu_irqs; |
9ee9fff9 | 582 | struct omap_hwmod_dma_info *sdma_reqs; |
5365efbe | 583 | struct omap_hwmod_rst_info *rst_lines; |
63c85238 PW |
584 | union { |
585 | struct omap_hwmod_omap2_prcm omap2; | |
586 | struct omap_hwmod_omap4_prcm omap4; | |
587 | } prcm; | |
50ebdac2 | 588 | const char *main_clk; |
63c85238 PW |
589 | struct clk *_clk; |
590 | struct omap_hwmod_opt_clk *opt_clks; | |
a5322c6f | 591 | char *clkdm_name; |
6ae76997 | 592 | struct clockdomain *clkdm; |
2221b5cd PW |
593 | struct list_head master_ports; /* connect to *_IA */ |
594 | struct list_head slave_ports; /* connect to *_TA */ | |
63c85238 PW |
595 | void *dev_attr; |
596 | u32 _sysc_cache; | |
db2a60bf | 597 | void __iomem *_mpu_rt_va; |
dc6d1cda | 598 | spinlock_t _lock; |
63c85238 | 599 | struct list_head node; |
2221b5cd | 600 | struct omap_hwmod_ocp_if *_mpu_port; |
63c85238 | 601 | u16 flags; |
63c85238 | 602 | u8 response_lat; |
5365efbe | 603 | u8 rst_lines_cnt; |
63c85238 PW |
604 | u8 opt_clks_cnt; |
605 | u8 masters_cnt; | |
606 | u8 slaves_cnt; | |
607 | u8 hwmods_cnt; | |
608 | u8 _int_flags; | |
609 | u8 _state; | |
2092e5cc | 610 | u8 _postsetup_state; |
63c85238 PW |
611 | }; |
612 | ||
63c85238 | 613 | struct omap_hwmod *omap_hwmod_lookup(const char *name); |
97d60162 PW |
614 | int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), |
615 | void *data); | |
63c85238 | 616 | |
a2debdbd | 617 | int __init omap_hwmod_setup_one(const char *name); |
63c85238 PW |
618 | |
619 | int omap_hwmod_enable(struct omap_hwmod *oh); | |
620 | int omap_hwmod_idle(struct omap_hwmod *oh); | |
621 | int omap_hwmod_shutdown(struct omap_hwmod *oh); | |
622 | ||
aee48e3c PW |
623 | int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); |
624 | int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); | |
625 | int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); | |
626 | ||
63c85238 PW |
627 | int omap_hwmod_enable_clocks(struct omap_hwmod *oh); |
628 | int omap_hwmod_disable_clocks(struct omap_hwmod *oh); | |
629 | ||
46273e6f | 630 | int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); |
9599217a | 631 | int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); |
46273e6f | 632 | |
63c85238 PW |
633 | int omap_hwmod_reset(struct omap_hwmod *oh); |
634 | void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); | |
635 | ||
cc7a1d2a RN |
636 | void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); |
637 | u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); | |
6d3c55fd | 638 | int omap_hwmod_softreset(struct omap_hwmod *oh); |
63c85238 | 639 | |
dad4191d | 640 | int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags); |
63c85238 | 641 | int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); |
b82b04e8 | 642 | int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); |
5e8370f1 PW |
643 | int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, |
644 | const char *name, struct resource *res); | |
63c85238 PW |
645 | |
646 | struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); | |
db2a60bf | 647 | void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); |
63c85238 PW |
648 | |
649 | int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, | |
650 | struct omap_hwmod *init_oh); | |
651 | int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, | |
652 | struct omap_hwmod *init_oh); | |
653 | ||
63c85238 PW |
654 | int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); |
655 | int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); | |
656 | ||
43b40992 PW |
657 | int omap_hwmod_for_each_by_class(const char *classname, |
658 | int (*fn)(struct omap_hwmod *oh, | |
659 | void *user), | |
660 | void *user); | |
661 | ||
2092e5cc | 662 | int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); |
fc013873 | 663 | int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); |
2092e5cc | 664 | |
43b01643 PW |
665 | int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); |
666 | ||
abc2d545 TK |
667 | int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); |
668 | ||
9ebfd285 KH |
669 | extern void __init omap_hwmod_init(void); |
670 | ||
68c9a95e TL |
671 | const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); |
672 | ||
7359154e PW |
673 | /* |
674 | * Chip variant-specific hwmod init routines - XXX should be converted | |
675 | * to use initcalls once the initial boot ordering is straightened out | |
676 | */ | |
677 | extern int omap2420_hwmod_init(void); | |
678 | extern int omap2430_hwmod_init(void); | |
679 | extern int omap3xxx_hwmod_init(void); | |
55d2cb08 | 680 | extern int omap44xx_hwmod_init(void); |
a2cfc509 | 681 | extern int am33xx_hwmod_init(void); |
7359154e | 682 | |
2221b5cd PW |
683 | extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); |
684 | ||
63c85238 | 685 | #endif |