[deliverable/linux.git] / arch / arm / mach-omap2 / omap_twl.c

/**
 * OMAP and TWL PMIC specific intializations.
 *
 * Copyright (C) 2010 Texas Instruments Incorporated.
 * Thara Gopinath
 * Copyright (C) 2009 Texas Instruments Incorporated.
 * Nishanth Menon
 * Copyright (C) 2009 Nokia Corporation
 * Paul Walmsley
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/i2c/twl.h>

#include "voltage.h"

#include "pm.h"

#define OMAP3_SRI2C_SLAVE_ADDR		0x12
#define OMAP3_VDD_MPU_SR_CONTROL_REG	0x00
#define OMAP3_VDD_CORE_SR_CONTROL_REG	0x01
#define OMAP3_VP_CONFIG_ERROROFFSET	0x00
#define OMAP3_VP_VSTEPMIN_VSTEPMIN	0x1
#define OMAP3_VP_VSTEPMAX_VSTEPMAX	0x04
#define OMAP3_VP_VLIMITTO_TIMEOUT_US	200

#define OMAP3430_VP1_VLIMITTO_VDDMIN	0x14
#define OMAP3430_VP1_VLIMITTO_VDDMAX	0x42
#define OMAP3430_VP2_VLIMITTO_VDDMIN	0x18
#define OMAP3430_VP2_VLIMITTO_VDDMAX	0x2c

#define OMAP3630_VP1_VLIMITTO_VDDMIN	0x18
#define OMAP3630_VP1_VLIMITTO_VDDMAX	0x3c
#define OMAP3630_VP2_VLIMITTO_VDDMIN	0x18
#define OMAP3630_VP2_VLIMITTO_VDDMAX	0x30

#define OMAP4_SRI2C_SLAVE_ADDR		0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG	0x55
#define OMAP4_VDD_MPU_SR_CMD_REG	0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG	0x5B
#define OMAP4_VDD_IVA_SR_CMD_REG	0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG	0x61
#define OMAP4_VDD_CORE_SR_CMD_REG	0x62

#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200

#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	0xA
#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	0x39
#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	0xA
#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	0x2D
#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	0xA
#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	0x28

static bool is_offset_valid;
static u8 smps_offset;
/*
 * Flag to ensure Smartreflex bit in TWL
 * being cleared in board file is not overwritten.
 */
static bool __initdata twl_sr_enable_autoinit;

#define TWL4030_DCDC_GLOBAL_CFG        0x06
#define REG_SMPS_OFFSET         0xE0
#define SMARTREFLEX_ENABLE     BIT(3)

static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
	return (((vsel * 125) + 6000)) * 100;
}

static u8 twl4030_uv_to_vsel(unsigned long uv)
{
	return DIV_ROUND_UP(uv - 600000, 12500);
}

static unsigned long twl6030_vsel_to_uv(const u8 vsel)
{
	/*
	 * In TWL6030 depending on the value of SMPS_OFFSET
	 * efuse register the voltage range supported in
	 * standard mode can be either between 0.6V - 1.3V or
	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
	 * is programmed to all 0's where as starting from
	 * TWL6030 ES1.1 the efuse is programmed to 1
	 */
	if (!is_offset_valid) {
		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
				REG_SMPS_OFFSET);
		is_offset_valid = true;
	}

	if (!vsel)
		return 0;
	/*
	 * There is no specific formula for voltage to vsel
	 * conversion above 1.3V. There are special hardcoded
	 * values for voltages above 1.3V. Currently we are
	 * hardcoding only for 1.35 V which is used for 1GH OPP for
	 * OMAP4430.
	 */
	if (vsel == 0x3A)
		return 1350000;

	if (smps_offset & 0x8)
		return ((((vsel - 1) * 1266) + 70900)) * 10;
	else
		return ((((vsel - 1) * 1266) + 60770)) * 10;
}

static u8 twl6030_uv_to_vsel(unsigned long uv)
{
	/*
	 * In TWL6030 depending on the value of SMPS_OFFSET
	 * efuse register the voltage range supported in
	 * standard mode can be either between 0.6V - 1.3V or
	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
	 * is programmed to all 0's where as starting from
	 * TWL6030 ES1.1 the efuse is programmed to 1
	 */
	if (!is_offset_valid) {
		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
				REG_SMPS_OFFSET);
		is_offset_valid = true;
	}

	if (!uv)
		return 0x00;
	/*
	 * There is no specific formula for voltage to vsel
	 * conversion above 1.3V. There are special hardcoded
	 * values for voltages above 1.3V. Currently we are
	 * hardcoding only for 1.35 V which is used for 1GH OPP for
	 * OMAP4430.
	 */
	if (uv > twl6030_vsel_to_uv(0x39)) {
		if (uv == 1350000)
			return 0x3A;
		pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
			__func__, uv, twl6030_vsel_to_uv(0x39));
		return 0x3A;
	}

	if (smps_offset & 0x8)
		return DIV_ROUND_UP(uv - 709000, 12660) + 1;
	else
		return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}

static struct omap_voltdm_pmic omap3_mpu_pmic = {
	.slew_rate		= 4000,
	.step_size		= 12500,
	.on_volt		= 1200000,
	.onlp_volt		= 1000000,
	.ret_volt		= 975000,
	.off_volt		= 600000,
	.volt_setup_time	= 0xfff,
	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
	.vp_vddmin		= OMAP3430_VP1_VLIMITTO_VDDMIN,
	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
	.volt_reg_addr		= OMAP3_VDD_MPU_SR_CONTROL_REG,
	.i2c_high_speed		= true,
	.vsel_to_uv		= twl4030_vsel_to_uv,
	.uv_to_vsel		= twl4030_uv_to_vsel,
};

static struct omap_voltdm_pmic omap3_core_pmic = {
	.slew_rate		= 4000,
	.step_size		= 12500,
	.on_volt                = 1200000,
	.onlp_volt              = 1000000,
	.ret_volt               = 975000,
	.off_volt               = 600000,
	.volt_setup_time        = 0xfff,
	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
	.vp_vddmin		= OMAP3430_VP2_VLIMITTO_VDDMIN,
	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
	.volt_reg_addr		= OMAP3_VDD_CORE_SR_CONTROL_REG,
	.i2c_high_speed		= true,
	.vsel_to_uv		= twl4030_vsel_to_uv,
	.uv_to_vsel		= twl4030_uv_to_vsel,
};

static struct omap_voltdm_pmic omap4_mpu_pmic = {
	.slew_rate		= 4000,
	.step_size		= 12660,
	.on_volt		= 1375000,
	.onlp_volt		= 1375000,
	.ret_volt		= 830000,
	.off_volt		= 0,
	.volt_setup_time	= 0,
	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
	.vp_vddmin		= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
	.volt_reg_addr		= OMAP4_VDD_MPU_SR_VOLT_REG,
	.cmd_reg_addr		= OMAP4_VDD_MPU_SR_CMD_REG,
	.i2c_high_speed		= true,
	.vsel_to_uv		= twl6030_vsel_to_uv,
	.uv_to_vsel		= twl6030_uv_to_vsel,
};

static struct omap_voltdm_pmic omap4_iva_pmic = {
	.slew_rate		= 4000,
	.step_size		= 12660,
	.on_volt		= 1188000,
	.onlp_volt		= 1188000,
	.ret_volt		= 830000,
	.off_volt		= 0,
	.volt_setup_time	= 0,
	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
	.vp_vddmin		= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
	.volt_reg_addr		= OMAP4_VDD_IVA_SR_VOLT_REG,
	.cmd_reg_addr		= OMAP4_VDD_IVA_SR_CMD_REG,
	.i2c_high_speed		= true,
	.vsel_to_uv		= twl6030_vsel_to_uv,
	.uv_to_vsel		= twl6030_uv_to_vsel,
};

static struct omap_voltdm_pmic omap4_core_pmic = {
	.slew_rate		= 4000,
	.step_size		= 12660,
	.on_volt		= 1200000,
	.onlp_volt		= 1200000,
	.ret_volt		= 830000,
	.off_volt		= 0,
	.volt_setup_time	= 0,
	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
	.vp_vddmin		= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
	.volt_reg_addr		= OMAP4_VDD_CORE_SR_VOLT_REG,
	.cmd_reg_addr		= OMAP4_VDD_CORE_SR_CMD_REG,
	.vsel_to_uv		= twl6030_vsel_to_uv,
	.uv_to_vsel		= twl6030_uv_to_vsel,
};

int __init omap4_twl_init(void)
{
	struct voltagedomain *voltdm;

	if (!cpu_is_omap44xx())
		return -ENODEV;

	voltdm = voltdm_lookup("mpu");
	omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);

	voltdm = voltdm_lookup("iva");
	omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);

	voltdm = voltdm_lookup("core");
	omap_voltage_register_pmic(voltdm, &omap4_core_pmic);

	return 0;
}

int __init omap3_twl_init(void)
{
	struct voltagedomain *voltdm;

	if (!cpu_is_omap34xx())
		return -ENODEV;

	if (cpu_is_omap3630()) {
		omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
		omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
		omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
		omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
	}

	/*
	 * The smartreflex bit on twl4030 specifies if the setting of voltage
	 * is done over the I2C_SR path. Since this setting is independent of
	 * the actual usage of smartreflex AVS module, we enable TWL SR bit
	 * by default irrespective of whether smartreflex AVS module is enabled
	 * on the OMAP side or not. This is because without this bit enabled,
	 * the voltage scaling through vp forceupdate/bypass mechanism of
	 * voltage scaling will not function on TWL over I2C_SR.
	 */
	if (!twl_sr_enable_autoinit)
		omap3_twl_set_sr_bit(true);

	voltdm = voltdm_lookup("mpu_iva");
	omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);

	voltdm = voltdm_lookup("core");
	omap_voltage_register_pmic(voltdm, &omap3_core_pmic);

	return 0;
}

/**
 * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
 * @enable: enable SR mode in twl or not
 *
 * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
 * voltage scaling through OMAP SR works. Else, the smartreflex bit
 * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
 * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
 * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
 * in those scenarios this bit is to be cleared (enable = false).
 *
 * Returns 0 on success, error is returned if I2C read/write fails.
 */
int __init omap3_twl_set_sr_bit(bool enable)
{
	u8 temp;
	int ret;
	if (twl_sr_enable_autoinit)
		pr_warning("%s: unexpected multiple calls\n", __func__);

	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
					TWL4030_DCDC_GLOBAL_CFG);
	if (ret)
		goto err;

	if (enable)
		temp |= SMARTREFLEX_ENABLE;
	else
		temp &= ~SMARTREFLEX_ENABLE;

	ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
				TWL4030_DCDC_GLOBAL_CFG);
	if (!ret) {
		twl_sr_enable_autoinit = true;
		return 0;
	}
err:
	pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
	return ret;
}
Commit	Line	Data
fbc319f6 TG	1	/**
	2	* OMAP and TWL PMIC specific intializations.
	3	*
	4	* Copyright (C) 2010 Texas Instruments Incorporated.
	5	* Thara Gopinath
	6	* Copyright (C) 2009 Texas Instruments Incorporated.
	7	* Nishanth Menon
	8	* Copyright (C) 2009 Nokia Corporation
	9	* Paul Walmsley
	10	*
	11	* This program is free software; you can redistribute it and/or modify
	12	* it under the terms of the GNU General Public License version 2 as
	13	* published by the Free Software Foundation.
	14	*/
	15
	16	#include <linux/err.h>
	17	#include <linux/io.h>
	18	#include <linux/kernel.h>
7bc3ed9a	19	#include <linux/i2c/twl.h>
fbc319f6	20
e1d6f472	21	#include "voltage.h"
fbc319f6	22
dda0aea7 NM	23	#include "pm.h"
dda0aea7 NM	24
fbc319f6 TG	25	#define OMAP3_SRI2C_SLAVE_ADDR 0x12
	26	#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
	27	#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
	28	#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
	29	#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
	30	#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
	31	#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
	32
	33	#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14
	34	#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42
	35	#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18
	36	#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c
	37
	38	#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18
	39	#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c
	40	#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18
	41	#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30
	42
7bc3ed9a TG	43	#define OMAP4_SRI2C_SLAVE_ADDR 0x12
7bc3ed9a TG	44	#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
ee7fbba6	45	#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
7bc3ed9a	46	#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
ee7fbba6	47	#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
7bc3ed9a	48	#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
ee7fbba6	49	#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
7bc3ed9a TG	50
	51	#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
	52	#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
	53	#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
	54	#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
	55
	56	#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA
	57	#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39
	58	#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA
	59	#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D
	60	#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA
	61	#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28
	62
	63	static bool is_offset_valid;
	64	static u8 smps_offset;
40713189 TG	65	/*
	66	* Flag to ensure Smartreflex bit in TWL
	67	* being cleared in board file is not overwritten.
	68	*/
	69	static bool __initdata twl_sr_enable_autoinit;
7bc3ed9a	70
40713189	71	#define TWL4030_DCDC_GLOBAL_CFG 0x06
7bc3ed9a	72	#define REG_SMPS_OFFSET 0xE0
40713189	73	#define SMARTREFLEX_ENABLE BIT(3)
7bc3ed9a	74
c84ff1cc	75	static unsigned long twl4030_vsel_to_uv(const u8 vsel)
fbc319f6 TG	76	{
	77	return (((vsel * 125) + 6000)) * 100;
	78	}
	79
c84ff1cc	80	static u8 twl4030_uv_to_vsel(unsigned long uv)
fbc319f6 TG	81	{
	82	return DIV_ROUND_UP(uv - 600000, 12500);
	83	}
	84
c84ff1cc	85	static unsigned long twl6030_vsel_to_uv(const u8 vsel)
7bc3ed9a TG	86	{
	87	/*
	88	* In TWL6030 depending on the value of SMPS_OFFSET
	89	* efuse register the voltage range supported in
	90	* standard mode can be either between 0.6V - 1.3V or
	91	* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
	92	* is programmed to all 0's where as starting from
	93	* TWL6030 ES1.1 the efuse is programmed to 1
	94	*/
	95	if (!is_offset_valid) {
	96	twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
	97	REG_SMPS_OFFSET);
	98	is_offset_valid = true;
	99	}
	100
2aed5b9e NM	101	if (!vsel)
2aed5b9e NM	102	return 0;
7bc3ed9a TG	103	/*
	104	* There is no specific formula for voltage to vsel
	105	* conversion above 1.3V. There are special hardcoded
	106	* values for voltages above 1.3V. Currently we are
	107	* hardcoding only for 1.35 V which is used for 1GH OPP for
	108	* OMAP4430.
	109	*/
	110	if (vsel == 0x3A)
	111	return 1350000;
	112
	113	if (smps_offset & 0x8)
58e241f7	114	return ((((vsel - 1) * 1266) + 70900)) * 10;
7bc3ed9a	115	else
58e241f7	116	return ((((vsel - 1) * 1266) + 60770)) * 10;
7bc3ed9a TG	117	}
7bc3ed9a TG	118
c84ff1cc	119	static u8 twl6030_uv_to_vsel(unsigned long uv)
7bc3ed9a TG	120	{
	121	/*
	122	* In TWL6030 depending on the value of SMPS_OFFSET
	123	* efuse register the voltage range supported in
	124	* standard mode can be either between 0.6V - 1.3V or
	125	* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
	126	* is programmed to all 0's where as starting from
	127	* TWL6030 ES1.1 the efuse is programmed to 1
	128	*/
	129	if (!is_offset_valid) {
	130	twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
	131	REG_SMPS_OFFSET);
	132	is_offset_valid = true;
	133	}
	134
2aed5b9e NM	135	if (!uv)
2aed5b9e NM	136	return 0x00;
7bc3ed9a TG	137	/*
	138	* There is no specific formula for voltage to vsel
	139	* conversion above 1.3V. There are special hardcoded
	140	* values for voltages above 1.3V. Currently we are
	141	* hardcoding only for 1.35 V which is used for 1GH OPP for
	142	* OMAP4430.
	143	*/
36649425 NM	144	if (uv > twl6030_vsel_to_uv(0x39)) {
	145	if (uv == 1350000)
	146	return 0x3A;
	147	pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
	148	__func__, uv, twl6030_vsel_to_uv(0x39));
7bc3ed9a	149	return 0x3A;
36649425	150	}
7bc3ed9a TG	151
7bc3ed9a TG	152	if (smps_offset & 0x8)
58e241f7	153	return DIV_ROUND_UP(uv - 709000, 12660) + 1;
7bc3ed9a	154	else
58e241f7	155	return DIV_ROUND_UP(uv - 607700, 12660) + 1;
7bc3ed9a TG	156	}
7bc3ed9a TG	157
ce8ebe0d	158	static struct omap_voltdm_pmic omap3_mpu_pmic = {
fbc319f6 TG	159	.slew_rate = 4000,
	160	.step_size = 12500,
	161	.on_volt = 1200000,
	162	.onlp_volt = 1000000,
	163	.ret_volt = 975000,
	164	.off_volt = 600000,
	165	.volt_setup_time = 0xfff,
	166	.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
	167	.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
	168	.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
	169	.vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
	170	.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
	171	.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
	172	.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
e74e4405	173	.volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
f5395480	174	.i2c_high_speed = true,
fbc319f6 TG	175	.vsel_to_uv = twl4030_vsel_to_uv,
	176	.uv_to_vsel = twl4030_uv_to_vsel,
	177	};
	178
ce8ebe0d	179	static struct omap_voltdm_pmic omap3_core_pmic = {
fbc319f6 TG	180	.slew_rate = 4000,
	181	.step_size = 12500,
	182	.on_volt = 1200000,
	183	.onlp_volt = 1000000,
	184	.ret_volt = 975000,
	185	.off_volt = 600000,
	186	.volt_setup_time = 0xfff,
	187	.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
	188	.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
	189	.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
	190	.vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
	191	.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
	192	.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
	193	.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
e74e4405	194	.volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
f5395480	195	.i2c_high_speed = true,
fbc319f6 TG	196	.vsel_to_uv = twl4030_vsel_to_uv,
	197	.uv_to_vsel = twl4030_uv_to_vsel,
	198	};
	199
ce8ebe0d	200	static struct omap_voltdm_pmic omap4_mpu_pmic = {
7bc3ed9a	201	.slew_rate = 4000,
58e241f7	202	.step_size = 12660,
63f60a43 PT	203	.on_volt = 1375000,
	204	.onlp_volt = 1375000,
	205	.ret_volt = 830000,
	206	.off_volt = 0,
7bc3ed9a TG	207	.volt_setup_time = 0,
	208	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
	209	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
	210	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
	211	.vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN,
	212	.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
	213	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
	214	.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
e74e4405	215	.volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
ee7fbba6	216	.cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
f5395480	217	.i2c_high_speed = true,
7bc3ed9a TG	218	.vsel_to_uv = twl6030_vsel_to_uv,
	219	.uv_to_vsel = twl6030_uv_to_vsel,
	220	};
	221
ce8ebe0d	222	static struct omap_voltdm_pmic omap4_iva_pmic = {
7bc3ed9a	223	.slew_rate = 4000,
58e241f7	224	.step_size = 12660,
63f60a43 PT	225	.on_volt = 1188000,
	226	.onlp_volt = 1188000,
	227	.ret_volt = 830000,
	228	.off_volt = 0,
7bc3ed9a TG	229	.volt_setup_time = 0,
	230	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
	231	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
	232	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
	233	.vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN,
	234	.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
	235	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
	236	.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
e74e4405	237	.volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
ee7fbba6	238	.cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
f5395480	239	.i2c_high_speed = true,
7bc3ed9a TG	240	.vsel_to_uv = twl6030_vsel_to_uv,
	241	.uv_to_vsel = twl6030_uv_to_vsel,
	242	};
	243
ce8ebe0d	244	static struct omap_voltdm_pmic omap4_core_pmic = {
7bc3ed9a	245	.slew_rate = 4000,
58e241f7	246	.step_size = 12660,
63f60a43 PT	247	.on_volt = 1200000,
	248	.onlp_volt = 1200000,
	249	.ret_volt = 830000,
	250	.off_volt = 0,
7bc3ed9a TG	251	.volt_setup_time = 0,
	252	.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
	253	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
	254	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
	255	.vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN,
	256	.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
	257	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
	258	.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
e74e4405	259	.volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
ee7fbba6	260	.cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
7bc3ed9a TG	261	.vsel_to_uv = twl6030_vsel_to_uv,
	262	.uv_to_vsel = twl6030_uv_to_vsel,
	263	};
	264
	265	int __init omap4_twl_init(void)
	266	{
	267	struct voltagedomain *voltdm;
	268
	269	if (!cpu_is_omap44xx())
	270	return -ENODEV;
	271
81a60482	272	voltdm = voltdm_lookup("mpu");
ce8ebe0d	273	omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
7bc3ed9a	274
81a60482	275	voltdm = voltdm_lookup("iva");
ce8ebe0d	276	omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
7bc3ed9a	277
81a60482	278	voltdm = voltdm_lookup("core");
ce8ebe0d	279	omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
7bc3ed9a TG	280
	281	return 0;
	282	}
	283
fbc319f6 TG	284	int __init omap3_twl_init(void)
	285	{
	286	struct voltagedomain *voltdm;
	287
	288	if (!cpu_is_omap34xx())
	289	return -ENODEV;
	290
	291	if (cpu_is_omap3630()) {
ce8ebe0d KH	292	omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
	293	omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
	294	omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
	295	omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
fbc319f6 TG	296	}
fbc319f6 TG	297
40713189 TG	298	/*
	299	* The smartreflex bit on twl4030 specifies if the setting of voltage
	300	* is done over the I2C_SR path. Since this setting is independent of
	301	* the actual usage of smartreflex AVS module, we enable TWL SR bit
	302	* by default irrespective of whether smartreflex AVS module is enabled
	303	* on the OMAP side or not. This is because without this bit enabled,
	304	* the voltage scaling through vp forceupdate/bypass mechanism of
	305	* voltage scaling will not function on TWL over I2C_SR.
	306	*/
	307	if (!twl_sr_enable_autoinit)
	308	omap3_twl_set_sr_bit(true);
	309
280a7275	310	voltdm = voltdm_lookup("mpu_iva");
ce8ebe0d	311	omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
fbc319f6	312
81a60482	313	voltdm = voltdm_lookup("core");
ce8ebe0d	314	omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
fbc319f6 TG	315
	316	return 0;
	317	}
40713189 TG	318
	319	/**
	320	* omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
	321	* @enable: enable SR mode in twl or not
	322	*
	323	* If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
	324	* voltage scaling through OMAP SR works. Else, the smartreflex bit
	325	* on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
	326	* use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
	327	* Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
	328	* in those scenarios this bit is to be cleared (enable = false).
	329	*
25985edc	330	* Returns 0 on success, error is returned if I2C read/write fails.
40713189 TG	331	*/
	332	int __init omap3_twl_set_sr_bit(bool enable)
	333	{
	334	u8 temp;
	335	int ret;
	336	if (twl_sr_enable_autoinit)
	337	pr_warning("%s: unexpected multiple calls\n", __func__);
	338
	339	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
	340	TWL4030_DCDC_GLOBAL_CFG);
	341	if (ret)
	342	goto err;
	343
	344	if (enable)
	345	temp \|= SMARTREFLEX_ENABLE;
	346	else
	347	temp &= ~SMARTREFLEX_ENABLE;
	348
	349	ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
	350	TWL4030_DCDC_GLOBAL_CFG);
	351	if (!ret) {
	352	twl_sr_enable_autoinit = true;
	353	return 0;
	354	}
	355	err:
	356	pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
	357	return ret;
	358	}