[deliverable/linux.git] / arch / arm / mach-omap2 / pm44xx.c

/*
 * OMAP4 Power Management Routines
 *
 * Copyright (C) 2010-2011 Texas Instruments, Inc.
 * Rajendra Nayak <rnayak@ti.com>
 * Santosh Shilimkar <santosh.shilimkar@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <asm/system_misc.h>

#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
#include "pm.h"

struct power_state {
	struct powerdomain *pwrdm;
	u32 next_state;
#ifdef CONFIG_SUSPEND
	u32 saved_state;
	u32 saved_logic_state;
#endif
	struct list_head node;
};

static LIST_HEAD(pwrst_list);

#ifdef CONFIG_SUSPEND
static int omap4_pm_suspend(void)
{
	struct power_state *pwrst;
	int state, ret = 0;
	u32 cpu_id = smp_processor_id();

	/* Save current powerdomain state */
	list_for_each_entry(pwrst, &pwrst_list, node) {
		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
		pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
	}

	/* Set targeted power domain states by suspend */
	list_for_each_entry(pwrst, &pwrst_list, node) {
		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
		pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
	}

	/*
	 * For MPUSS to hit power domain retention(CSWR or OSWR),
	 * CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
	 * since CPU power domain CSWR is not supported by hardware
	 * Only master CPU follows suspend path. All other CPUs follow
	 * CPU hotplug path in system wide suspend. On OMAP4, CPU power
	 * domain CSWR is not supported by hardware.
	 * More details can be found in OMAP4430 TRM section 4.3.4.2.
	 */
	omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);

	/* Restore next powerdomain state */
	list_for_each_entry(pwrst, &pwrst_list, node) {
		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
		if (state > pwrst->next_state) {
			pr_info("Powerdomain (%s) didn't enter target state %d\n",
				pwrst->pwrdm->name, pwrst->next_state);
			ret = -1;
		}
		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
		pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
	}
	if (ret) {
		pr_crit("Could not enter target state in pm_suspend\n");
		/*
		 * OMAP4 chip PM currently works only with certain (newer)
		 * versions of bootloaders. This is due to missing code in the
		 * kernel to properly reset and initialize some devices.
		 * Warn the user about the bootloader version being one of the
		 * possible causes.
		 * http://www.spinics.net/lists/arm-kernel/msg218641.html
		 */
		pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
	} else {
		pr_info("Successfully put all powerdomains to target state\n");
	}

	return 0;
}
#endif /* CONFIG_SUSPEND */

static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
{
	struct power_state *pwrst;

	if (!pwrdm->pwrsts)
		return 0;

	/*
	 * Skip CPU0 and CPU1 power domains. CPU1 is programmed
	 * through hotplug path and CPU0 explicitly programmed
	 * further down in the code path
	 */
	if (!strncmp(pwrdm->name, "cpu", 3))
		return 0;

	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
	if (!pwrst)
		return -ENOMEM;

	pwrst->pwrdm = pwrdm;
	pwrst->next_state = PWRDM_POWER_RET;
	list_add(&pwrst->node, &pwrst_list);

	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}

/**
 * omap_default_idle - OMAP4 default ilde routine.'
 *
 * Implements OMAP4 memory, IO ordering requirements which can't be addressed
 * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and
 * by secondary CPU with CONFIG_CPU_IDLE.
 */
static void omap_default_idle(void)
{
	local_fiq_disable();

	omap_do_wfi();

	local_fiq_enable();
}

/**
 * omap4_pm_init - Init routine for OMAP4 PM
 *
 * Initializes all powerdomain and clockdomain target states
 * and all PRCM settings.
 */
int __init omap4_pm_init(void)
{
	int ret;
	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
	struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;

	if (omap_rev() == OMAP4430_REV_ES1_0) {
		WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
		return -ENODEV;
	}

	pr_err("Power Management for TI OMAP4.\n");
	/*
	 * OMAP4 chip PM currently works only with certain (newer)
	 * versions of bootloaders. This is due to missing code in the
	 * kernel to properly reset and initialize some devices.
	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
	 */
	pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");

	ret = pwrdm_for_each(pwrdms_setup, NULL);
	if (ret) {
		pr_err("Failed to setup powerdomains\n");
		goto err2;
	}

	/*
	 * The dynamic dependency between MPUSS -> MEMIF and
	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
	 * expected. The hardware recommendation is to enable static
	 * dependencies for these to avoid system lock ups or random crashes.
	 * The L4 wakeup depedency is added to workaround the OCP sync hardware
	 * BUG with 32K synctimer which lead to incorrect timer value read
	 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
	 * are part of L4 wakeup clockdomain.
	 */
	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
	l4wkup = clkdm_lookup("l4_wkup_clkdm");
	ducati_clkdm = clkdm_lookup("ducati_clkdm");
	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) ||
		(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
		goto err2;

	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
	ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
	ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
	if (ret) {
		pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
		goto err2;
	}

	ret = omap4_mpuss_init();
	if (ret) {
		pr_err("Failed to initialise OMAP4 MPUSS\n");
		goto err2;
	}

	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);

#ifdef CONFIG_SUSPEND
	omap_pm_suspend = omap4_pm_suspend;
#endif

	/* Overwrite the default cpu_do_idle() */
	arm_pm_idle = omap_default_idle;

	omap4_idle_init();

err2:
	return ret;
}
Commit	Line	Data
5643aebb RN	1	/*
	2	* OMAP4 Power Management Routines
	3	*
e44f9a77	4	* Copyright (C) 2010-2011 Texas Instruments, Inc.
5643aebb	5	* Rajendra Nayak <rnayak@ti.com>
e44f9a77	6	* Santosh Shilimkar <santosh.shilimkar@ti.com>
5643aebb RN	7	*
	8	* This program is free software; you can redistribute it and/or modify
	9	* it under the terms of the GNU General Public License version 2 as
	10	* published by the Free Software Foundation.
	11	*/
	12
	13	#include <linux/pm.h>
	14	#include <linux/suspend.h>
	15	#include <linux/module.h>
	16	#include <linux/list.h>
	17	#include <linux/err.h>
	18	#include <linux/slab.h>
9f97da78	19	#include <asm/system_misc.h>
5643aebb	20
e4c060db	21	#include "soc.h"
4e65331c	22	#include "common.h"
3c50729b	23	#include "clockdomain.h"
72e06d08	24	#include "powerdomain.h"
e44f9a77	25	#include "pm.h"
5643aebb RN	26
	27	struct power_state {
	28	struct powerdomain *pwrdm;
	29	u32 next_state;
	30	#ifdef CONFIG_SUSPEND
	31	u32 saved_state;
3ba2a739	32	u32 saved_logic_state;
5643aebb RN	33	#endif
	34	struct list_head node;
	35	};
	36
	37	static LIST_HEAD(pwrst_list);
	38
	39	#ifdef CONFIG_SUSPEND
5643aebb RN	40	static int omap4_pm_suspend(void)
5643aebb RN	41	{
e44f9a77 SS	42	struct power_state *pwrst;
	43	int state, ret = 0;
	44	u32 cpu_id = smp_processor_id();
	45
	46	/* Save current powerdomain state */
	47	list_for_each_entry(pwrst, &pwrst_list, node) {
	48	pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
3ba2a739	49	pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
e44f9a77 SS	50	}
	51
	52	/* Set targeted power domain states by suspend */
	53	list_for_each_entry(pwrst, &pwrst_list, node) {
	54	omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
3ba2a739	55	pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
e44f9a77 SS	56	}
	57
	58	/*
	59	* For MPUSS to hit power domain retention(CSWR or OSWR),
	60	* CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
	61	* since CPU power domain CSWR is not supported by hardware
	62	* Only master CPU follows suspend path. All other CPUs follow
	63	* CPU hotplug path in system wide suspend. On OMAP4, CPU power
	64	* domain CSWR is not supported by hardware.
	65	* More details can be found in OMAP4430 TRM section 4.3.4.2.
	66	*/
	67	omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
	68
	69	/* Restore next powerdomain state */
	70	list_for_each_entry(pwrst, &pwrst_list, node) {
	71	state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
	72	if (state > pwrst->next_state) {
7852ec05 PW	73	pr_info("Powerdomain (%s) didn't enter target state %d\n",
7852ec05 PW	74	pwrst->pwrdm->name, pwrst->next_state);
e44f9a77 SS	75	ret = -1;
	76	}
	77	omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
3ba2a739	78	pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
e44f9a77	79	}
60480098	80	if (ret) {
e44f9a77	81	pr_crit("Could not enter target state in pm_suspend\n");
60480098 RN	82	/*
	83	* OMAP4 chip PM currently works only with certain (newer)
	84	* versions of bootloaders. This is due to missing code in the
	85	* kernel to properly reset and initialize some devices.
	86	* Warn the user about the bootloader version being one of the
	87	* possible causes.
	88	* http://www.spinics.net/lists/arm-kernel/msg218641.html
	89	*/
	90	pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n");
	91	} else {
e44f9a77	92	pr_info("Successfully put all powerdomains to target state\n");
60480098	93	}
e44f9a77	94
5643aebb RN	95	return 0;
5643aebb RN	96	}
5643aebb RN	97	#endif /* CONFIG_SUSPEND */
	98
	99	static int __init pwrdms_setup(struct powerdomain pwrdm, void unused)
	100	{
	101	struct power_state *pwrst;
	102
	103	if (!pwrdm->pwrsts)
	104	return 0;
	105
e44f9a77 SS	106	/*
	107	* Skip CPU0 and CPU1 power domains. CPU1 is programmed
	108	* through hotplug path and CPU0 explicitly programmed
	109	* further down in the code path
	110	*/
	111	if (!strncmp(pwrdm->name, "cpu", 3))
	112	return 0;
	113
5643aebb RN	114	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
	115	if (!pwrst)
	116	return -ENOMEM;
e44f9a77	117
5643aebb	118	pwrst->pwrdm = pwrdm;
e44f9a77	119	pwrst->next_state = PWRDM_POWER_RET;
5643aebb RN	120	list_add(&pwrst->node, &pwrst_list);
5643aebb RN	121
e44f9a77	122	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
5643aebb RN	123	}
5643aebb RN	124
72826b9f SS	125	/**
	126	* omap_default_idle - OMAP4 default ilde routine.'
	127	*
	128	* Implements OMAP4 memory, IO ordering requirements which can't be addressed
62006324 PB	129	* with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and
62006324 PB	130	* by secondary CPU with CONFIG_CPU_IDLE.
72826b9f SS	131	*/
	132	static void omap_default_idle(void)
	133	{
72826b9f SS	134	local_fiq_disable();
	135
	136	omap_do_wfi();
	137
	138	local_fiq_enable();
72826b9f SS	139	}
72826b9f SS	140
5643aebb RN	141	/**
	142	* omap4_pm_init - Init routine for OMAP4 PM
	143	*
	144	* Initializes all powerdomain and clockdomain target states
	145	* and all PRCM settings.
	146	*/
bbd707ac	147	int __init omap4_pm_init(void)
5643aebb RN	148	{
5643aebb RN	149	int ret;
68523f42	150	struct clockdomain emif_clkdm, mpuss_clkdm, l3_1_clkdm, l4wkup;
12f27826	151	struct clockdomain ducati_clkdm, l3_2_clkdm, *l4_per_clkdm;
5643aebb	152
361b02f3 SS	153	if (omap_rev() == OMAP4430_REV_ES1_0) {
	154	WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
	155	return -ENODEV;
	156	}
	157
5643aebb	158	pr_err("Power Management for TI OMAP4.\n");
60480098 RN	159	/*
	160	* OMAP4 chip PM currently works only with certain (newer)
	161	* versions of bootloaders. This is due to missing code in the
	162	* kernel to properly reset and initialize some devices.
	163	* http://www.spinics.net/lists/arm-kernel/msg218641.html
	164	*/
	165	pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
5643aebb	166
5643aebb RN	167	ret = pwrdm_for_each(pwrdms_setup, NULL);
	168	if (ret) {
	169	pr_err("Failed to setup powerdomains\n");
	170	goto err2;
	171	}
5643aebb	172
12f27826 SS	173	/*
	174	* The dynamic dependency between MPUSS -> MEMIF and
	175	* MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
	176	* expected. The hardware recommendation is to enable static
	177	* dependencies for these to avoid system lock ups or random crashes.
68523f42 SS	178	* The L4 wakeup depedency is added to workaround the OCP sync hardware
	179	* BUG with 32K synctimer which lead to incorrect timer value read
	180	* from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
	181	* are part of L4 wakeup clockdomain.
12f27826 SS	182	*/
	183	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
	184	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
	185	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
	186	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
	187	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
68523f42	188	l4wkup = clkdm_lookup("l4_wkup_clkdm");
12f27826	189	ducati_clkdm = clkdm_lookup("ducati_clkdm");
68523f42	190	if ((!mpuss_clkdm) \|\| (!emif_clkdm) \|\| (!l3_1_clkdm) \|\| (!l4wkup) \|\|
12f27826 SS	191	(!l3_2_clkdm) \|\| (!ducati_clkdm) \|\| (!l4_per_clkdm))
	192	goto err2;
	193
	194	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
	195	ret \|= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
	196	ret \|= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
	197	ret \|= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
68523f42	198	ret \|= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
12f27826 SS	199	ret \|= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
	200	ret \|= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
	201	if (ret) {
7852ec05	202	pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
12f27826 SS	203	goto err2;
	204	}
	205
b2b9762f SS	206	ret = omap4_mpuss_init();
	207	if (ret) {
	208	pr_err("Failed to initialise OMAP4 MPUSS\n");
	209	goto err2;
	210	}
	211
92206fd2	212	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
3c50729b	213
5643aebb	214	#ifdef CONFIG_SUSPEND
1416408d PW	215	omap_pm_suspend = omap4_pm_suspend;
1416408d PW	216	#endif
5643aebb	217
ae940913	218	/* Overwrite the default cpu_do_idle() */
0bcd24b0	219	arm_pm_idle = omap_default_idle;
72826b9f	220
98272660 SS	221	omap4_idle_init();
98272660 SS	222
5643aebb RN	223	err2:
	224	return ret;
	225	}