Commit | Line | Data |
---|---|---|
58a5491c | 1 | /* |
a8480ea0 | 2 | * usb-host.c - OMAP USB Host |
58a5491c FB |
3 | * |
4 | * This file will contain the board specific details for the | |
a8480ea0 | 5 | * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards |
58a5491c | 6 | * |
a8480ea0 | 7 | * Copyright (C) 2007-2011 Texas Instruments |
58a5491c | 8 | * Author: Vikram Pandita <vikram.pandita@ti.com> |
2236396d | 9 | * Author: Keshava Munegowda <keshava_mgowda@ti.com> |
58a5491c FB |
10 | * |
11 | * Generalization by: | |
a8480ea0 | 12 | * Felipe Balbi <balbi@ti.com> |
58a5491c FB |
13 | * |
14 | * This program is free software; you can redistribute it and/or modify | |
15 | * it under the terms of the GNU General Public License version 2 as | |
16 | * published by the Free Software Foundation. | |
17 | */ | |
18 | ||
19 | #include <linux/types.h> | |
20 | #include <linux/errno.h> | |
21 | #include <linux/delay.h> | |
22 | #include <linux/platform_device.h> | |
2236396d | 23 | #include <linux/slab.h> |
bfb01197 AK |
24 | #include <linux/dma-mapping.h> |
25 | ||
58a5491c | 26 | #include <asm/io.h> |
58a5491c FB |
27 | |
28 | #include <mach/hardware.h> | |
58a5491c | 29 | #include <plat/usb.h> |
50b2a9bd | 30 | #include <plat/omap_device.h> |
58a5491c | 31 | |
4896e394 TL |
32 | #include "mux.h" |
33 | ||
2236396d | 34 | #ifdef CONFIG_MFD_OMAP_USB_HOST |
58a5491c | 35 | |
50b2a9bd KM |
36 | #define OMAP_USBHS_DEVICE "usbhs_omap" |
37 | #define USBHS_UHH_HWMODNAME "usb_host_hs" | |
38 | #define USBHS_TLL_HWMODNAME "usb_tll_hs" | |
58a5491c | 39 | |
3b68ae73 KM |
40 | static struct usbhs_omap_platform_data usbhs_data; |
41 | static struct ehci_hcd_omap_platform_data ehci_data; | |
42 | static struct ohci_hcd_omap_platform_data ohci_data; | |
43 | ||
50b2a9bd KM |
44 | static struct omap_device_pm_latency omap_uhhtll_latency[] = { |
45 | { | |
46 | .deactivate_func = omap_device_idle_hwmods, | |
47 | .activate_func = omap_device_enable_hwmods, | |
48 | .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, | |
49 | }, | |
50 | }; | |
51 | ||
58a5491c FB |
52 | /* MUX settings for EHCI pins */ |
53 | /* | |
54 | * setup_ehci_io_mux - initialize IO pad mux for USBHOST | |
55 | */ | |
1512f0db | 56 | static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) |
58a5491c FB |
57 | { |
58 | switch (port_mode[0]) { | |
181b250c | 59 | case OMAP_EHCI_PORT_MODE_PHY: |
4896e394 TL |
60 | omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); |
61 | omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); | |
62 | omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); | |
63 | omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); | |
64 | omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); | |
65 | omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); | |
66 | omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); | |
67 | omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); | |
68 | omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); | |
69 | omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); | |
70 | omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); | |
71 | omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); | |
58a5491c | 72 | break; |
181b250c | 73 | case OMAP_EHCI_PORT_MODE_TLL: |
4896e394 TL |
74 | omap_mux_init_signal("hsusb1_tll_stp", |
75 | OMAP_PIN_INPUT_PULLUP); | |
76 | omap_mux_init_signal("hsusb1_tll_clk", | |
77 | OMAP_PIN_INPUT_PULLDOWN); | |
78 | omap_mux_init_signal("hsusb1_tll_dir", | |
79 | OMAP_PIN_INPUT_PULLDOWN); | |
80 | omap_mux_init_signal("hsusb1_tll_nxt", | |
81 | OMAP_PIN_INPUT_PULLDOWN); | |
82 | omap_mux_init_signal("hsusb1_tll_data0", | |
83 | OMAP_PIN_INPUT_PULLDOWN); | |
84 | omap_mux_init_signal("hsusb1_tll_data1", | |
85 | OMAP_PIN_INPUT_PULLDOWN); | |
86 | omap_mux_init_signal("hsusb1_tll_data2", | |
87 | OMAP_PIN_INPUT_PULLDOWN); | |
88 | omap_mux_init_signal("hsusb1_tll_data3", | |
89 | OMAP_PIN_INPUT_PULLDOWN); | |
90 | omap_mux_init_signal("hsusb1_tll_data4", | |
91 | OMAP_PIN_INPUT_PULLDOWN); | |
92 | omap_mux_init_signal("hsusb1_tll_data5", | |
93 | OMAP_PIN_INPUT_PULLDOWN); | |
94 | omap_mux_init_signal("hsusb1_tll_data6", | |
95 | OMAP_PIN_INPUT_PULLDOWN); | |
96 | omap_mux_init_signal("hsusb1_tll_data7", | |
97 | OMAP_PIN_INPUT_PULLDOWN); | |
58a5491c | 98 | break; |
181b250c | 99 | case OMAP_USBHS_PORT_MODE_UNUSED: |
58a5491c FB |
100 | /* FALLTHROUGH */ |
101 | default: | |
102 | break; | |
103 | } | |
104 | ||
105 | switch (port_mode[1]) { | |
181b250c | 106 | case OMAP_EHCI_PORT_MODE_PHY: |
4896e394 TL |
107 | omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); |
108 | omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); | |
109 | omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); | |
110 | omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); | |
111 | omap_mux_init_signal("hsusb2_data0", | |
112 | OMAP_PIN_INPUT_PULLDOWN); | |
113 | omap_mux_init_signal("hsusb2_data1", | |
114 | OMAP_PIN_INPUT_PULLDOWN); | |
115 | omap_mux_init_signal("hsusb2_data2", | |
116 | OMAP_PIN_INPUT_PULLDOWN); | |
117 | omap_mux_init_signal("hsusb2_data3", | |
118 | OMAP_PIN_INPUT_PULLDOWN); | |
119 | omap_mux_init_signal("hsusb2_data4", | |
120 | OMAP_PIN_INPUT_PULLDOWN); | |
121 | omap_mux_init_signal("hsusb2_data5", | |
122 | OMAP_PIN_INPUT_PULLDOWN); | |
123 | omap_mux_init_signal("hsusb2_data6", | |
124 | OMAP_PIN_INPUT_PULLDOWN); | |
125 | omap_mux_init_signal("hsusb2_data7", | |
126 | OMAP_PIN_INPUT_PULLDOWN); | |
58a5491c | 127 | break; |
181b250c | 128 | case OMAP_EHCI_PORT_MODE_TLL: |
4896e394 TL |
129 | omap_mux_init_signal("hsusb2_tll_stp", |
130 | OMAP_PIN_INPUT_PULLUP); | |
131 | omap_mux_init_signal("hsusb2_tll_clk", | |
132 | OMAP_PIN_INPUT_PULLDOWN); | |
133 | omap_mux_init_signal("hsusb2_tll_dir", | |
134 | OMAP_PIN_INPUT_PULLDOWN); | |
135 | omap_mux_init_signal("hsusb2_tll_nxt", | |
136 | OMAP_PIN_INPUT_PULLDOWN); | |
137 | omap_mux_init_signal("hsusb2_tll_data0", | |
138 | OMAP_PIN_INPUT_PULLDOWN); | |
139 | omap_mux_init_signal("hsusb2_tll_data1", | |
140 | OMAP_PIN_INPUT_PULLDOWN); | |
141 | omap_mux_init_signal("hsusb2_tll_data2", | |
142 | OMAP_PIN_INPUT_PULLDOWN); | |
143 | omap_mux_init_signal("hsusb2_tll_data3", | |
144 | OMAP_PIN_INPUT_PULLDOWN); | |
145 | omap_mux_init_signal("hsusb2_tll_data4", | |
146 | OMAP_PIN_INPUT_PULLDOWN); | |
147 | omap_mux_init_signal("hsusb2_tll_data5", | |
148 | OMAP_PIN_INPUT_PULLDOWN); | |
149 | omap_mux_init_signal("hsusb2_tll_data6", | |
150 | OMAP_PIN_INPUT_PULLDOWN); | |
151 | omap_mux_init_signal("hsusb2_tll_data7", | |
152 | OMAP_PIN_INPUT_PULLDOWN); | |
58a5491c | 153 | break; |
181b250c | 154 | case OMAP_USBHS_PORT_MODE_UNUSED: |
58a5491c FB |
155 | /* FALLTHROUGH */ |
156 | default: | |
157 | break; | |
158 | } | |
159 | ||
160 | switch (port_mode[2]) { | |
181b250c | 161 | case OMAP_EHCI_PORT_MODE_PHY: |
58a5491c FB |
162 | printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); |
163 | break; | |
181b250c | 164 | case OMAP_EHCI_PORT_MODE_TLL: |
4896e394 TL |
165 | omap_mux_init_signal("hsusb3_tll_stp", |
166 | OMAP_PIN_INPUT_PULLUP); | |
167 | omap_mux_init_signal("hsusb3_tll_clk", | |
168 | OMAP_PIN_INPUT_PULLDOWN); | |
169 | omap_mux_init_signal("hsusb3_tll_dir", | |
170 | OMAP_PIN_INPUT_PULLDOWN); | |
171 | omap_mux_init_signal("hsusb3_tll_nxt", | |
172 | OMAP_PIN_INPUT_PULLDOWN); | |
173 | omap_mux_init_signal("hsusb3_tll_data0", | |
174 | OMAP_PIN_INPUT_PULLDOWN); | |
175 | omap_mux_init_signal("hsusb3_tll_data1", | |
176 | OMAP_PIN_INPUT_PULLDOWN); | |
177 | omap_mux_init_signal("hsusb3_tll_data2", | |
178 | OMAP_PIN_INPUT_PULLDOWN); | |
179 | omap_mux_init_signal("hsusb3_tll_data3", | |
180 | OMAP_PIN_INPUT_PULLDOWN); | |
181 | omap_mux_init_signal("hsusb3_tll_data4", | |
182 | OMAP_PIN_INPUT_PULLDOWN); | |
183 | omap_mux_init_signal("hsusb3_tll_data5", | |
184 | OMAP_PIN_INPUT_PULLDOWN); | |
185 | omap_mux_init_signal("hsusb3_tll_data6", | |
186 | OMAP_PIN_INPUT_PULLDOWN); | |
187 | omap_mux_init_signal("hsusb3_tll_data7", | |
188 | OMAP_PIN_INPUT_PULLDOWN); | |
58a5491c | 189 | break; |
181b250c | 190 | case OMAP_USBHS_PORT_MODE_UNUSED: |
58a5491c FB |
191 | /* FALLTHROUGH */ |
192 | default: | |
193 | break; | |
194 | } | |
195 | ||
196 | return; | |
197 | } | |
198 | ||
1512f0db IG |
199 | static |
200 | void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) | |
becf0737 AG |
201 | { |
202 | switch (port_mode[0]) { | |
181b250c | 203 | case OMAP_EHCI_PORT_MODE_PHY: |
becf0737 AG |
204 | omap_mux_init_signal("usbb1_ulpiphy_stp", |
205 | OMAP_PIN_OUTPUT); | |
206 | omap_mux_init_signal("usbb1_ulpiphy_clk", | |
207 | OMAP_PIN_INPUT_PULLDOWN); | |
208 | omap_mux_init_signal("usbb1_ulpiphy_dir", | |
209 | OMAP_PIN_INPUT_PULLDOWN); | |
210 | omap_mux_init_signal("usbb1_ulpiphy_nxt", | |
211 | OMAP_PIN_INPUT_PULLDOWN); | |
212 | omap_mux_init_signal("usbb1_ulpiphy_dat0", | |
213 | OMAP_PIN_INPUT_PULLDOWN); | |
214 | omap_mux_init_signal("usbb1_ulpiphy_dat1", | |
215 | OMAP_PIN_INPUT_PULLDOWN); | |
216 | omap_mux_init_signal("usbb1_ulpiphy_dat2", | |
217 | OMAP_PIN_INPUT_PULLDOWN); | |
218 | omap_mux_init_signal("usbb1_ulpiphy_dat3", | |
219 | OMAP_PIN_INPUT_PULLDOWN); | |
220 | omap_mux_init_signal("usbb1_ulpiphy_dat4", | |
221 | OMAP_PIN_INPUT_PULLDOWN); | |
222 | omap_mux_init_signal("usbb1_ulpiphy_dat5", | |
223 | OMAP_PIN_INPUT_PULLDOWN); | |
224 | omap_mux_init_signal("usbb1_ulpiphy_dat6", | |
225 | OMAP_PIN_INPUT_PULLDOWN); | |
226 | omap_mux_init_signal("usbb1_ulpiphy_dat7", | |
227 | OMAP_PIN_INPUT_PULLDOWN); | |
228 | break; | |
181b250c | 229 | case OMAP_EHCI_PORT_MODE_TLL: |
becf0737 AG |
230 | omap_mux_init_signal("usbb1_ulpitll_stp", |
231 | OMAP_PIN_INPUT_PULLUP); | |
232 | omap_mux_init_signal("usbb1_ulpitll_clk", | |
233 | OMAP_PIN_INPUT_PULLDOWN); | |
234 | omap_mux_init_signal("usbb1_ulpitll_dir", | |
235 | OMAP_PIN_INPUT_PULLDOWN); | |
236 | omap_mux_init_signal("usbb1_ulpitll_nxt", | |
237 | OMAP_PIN_INPUT_PULLDOWN); | |
238 | omap_mux_init_signal("usbb1_ulpitll_dat0", | |
239 | OMAP_PIN_INPUT_PULLDOWN); | |
240 | omap_mux_init_signal("usbb1_ulpitll_dat1", | |
241 | OMAP_PIN_INPUT_PULLDOWN); | |
242 | omap_mux_init_signal("usbb1_ulpitll_dat2", | |
243 | OMAP_PIN_INPUT_PULLDOWN); | |
244 | omap_mux_init_signal("usbb1_ulpitll_dat3", | |
245 | OMAP_PIN_INPUT_PULLDOWN); | |
246 | omap_mux_init_signal("usbb1_ulpitll_dat4", | |
247 | OMAP_PIN_INPUT_PULLDOWN); | |
248 | omap_mux_init_signal("usbb1_ulpitll_dat5", | |
249 | OMAP_PIN_INPUT_PULLDOWN); | |
250 | omap_mux_init_signal("usbb1_ulpitll_dat6", | |
251 | OMAP_PIN_INPUT_PULLDOWN); | |
252 | omap_mux_init_signal("usbb1_ulpitll_dat7", | |
253 | OMAP_PIN_INPUT_PULLDOWN); | |
254 | break; | |
181b250c | 255 | case OMAP_USBHS_PORT_MODE_UNUSED: |
becf0737 AG |
256 | default: |
257 | break; | |
258 | } | |
259 | switch (port_mode[1]) { | |
181b250c | 260 | case OMAP_EHCI_PORT_MODE_PHY: |
becf0737 AG |
261 | omap_mux_init_signal("usbb2_ulpiphy_stp", |
262 | OMAP_PIN_OUTPUT); | |
263 | omap_mux_init_signal("usbb2_ulpiphy_clk", | |
264 | OMAP_PIN_INPUT_PULLDOWN); | |
265 | omap_mux_init_signal("usbb2_ulpiphy_dir", | |
266 | OMAP_PIN_INPUT_PULLDOWN); | |
267 | omap_mux_init_signal("usbb2_ulpiphy_nxt", | |
268 | OMAP_PIN_INPUT_PULLDOWN); | |
269 | omap_mux_init_signal("usbb2_ulpiphy_dat0", | |
270 | OMAP_PIN_INPUT_PULLDOWN); | |
271 | omap_mux_init_signal("usbb2_ulpiphy_dat1", | |
272 | OMAP_PIN_INPUT_PULLDOWN); | |
273 | omap_mux_init_signal("usbb2_ulpiphy_dat2", | |
274 | OMAP_PIN_INPUT_PULLDOWN); | |
275 | omap_mux_init_signal("usbb2_ulpiphy_dat3", | |
276 | OMAP_PIN_INPUT_PULLDOWN); | |
277 | omap_mux_init_signal("usbb2_ulpiphy_dat4", | |
278 | OMAP_PIN_INPUT_PULLDOWN); | |
279 | omap_mux_init_signal("usbb2_ulpiphy_dat5", | |
280 | OMAP_PIN_INPUT_PULLDOWN); | |
281 | omap_mux_init_signal("usbb2_ulpiphy_dat6", | |
282 | OMAP_PIN_INPUT_PULLDOWN); | |
283 | omap_mux_init_signal("usbb2_ulpiphy_dat7", | |
284 | OMAP_PIN_INPUT_PULLDOWN); | |
285 | break; | |
181b250c | 286 | case OMAP_EHCI_PORT_MODE_TLL: |
becf0737 AG |
287 | omap_mux_init_signal("usbb2_ulpitll_stp", |
288 | OMAP_PIN_INPUT_PULLUP); | |
289 | omap_mux_init_signal("usbb2_ulpitll_clk", | |
290 | OMAP_PIN_INPUT_PULLDOWN); | |
291 | omap_mux_init_signal("usbb2_ulpitll_dir", | |
292 | OMAP_PIN_INPUT_PULLDOWN); | |
293 | omap_mux_init_signal("usbb2_ulpitll_nxt", | |
294 | OMAP_PIN_INPUT_PULLDOWN); | |
295 | omap_mux_init_signal("usbb2_ulpitll_dat0", | |
296 | OMAP_PIN_INPUT_PULLDOWN); | |
297 | omap_mux_init_signal("usbb2_ulpitll_dat1", | |
298 | OMAP_PIN_INPUT_PULLDOWN); | |
299 | omap_mux_init_signal("usbb2_ulpitll_dat2", | |
300 | OMAP_PIN_INPUT_PULLDOWN); | |
301 | omap_mux_init_signal("usbb2_ulpitll_dat3", | |
302 | OMAP_PIN_INPUT_PULLDOWN); | |
303 | omap_mux_init_signal("usbb2_ulpitll_dat4", | |
304 | OMAP_PIN_INPUT_PULLDOWN); | |
305 | omap_mux_init_signal("usbb2_ulpitll_dat5", | |
306 | OMAP_PIN_INPUT_PULLDOWN); | |
307 | omap_mux_init_signal("usbb2_ulpitll_dat6", | |
308 | OMAP_PIN_INPUT_PULLDOWN); | |
309 | omap_mux_init_signal("usbb2_ulpitll_dat7", | |
310 | OMAP_PIN_INPUT_PULLDOWN); | |
311 | break; | |
181b250c | 312 | case OMAP_USBHS_PORT_MODE_UNUSED: |
becf0737 AG |
313 | default: |
314 | break; | |
315 | } | |
316 | } | |
317 | ||
1512f0db | 318 | static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) |
95344fcc AG |
319 | { |
320 | switch (port_mode[0]) { | |
321 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
322 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
323 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
324 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
325 | omap_mux_init_signal("mm1_rxdp", | |
326 | OMAP_PIN_INPUT_PULLDOWN); | |
327 | omap_mux_init_signal("mm1_rxdm", | |
328 | OMAP_PIN_INPUT_PULLDOWN); | |
329 | /* FALLTHROUGH */ | |
330 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
331 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
332 | omap_mux_init_signal("mm1_rxrcv", | |
333 | OMAP_PIN_INPUT_PULLDOWN); | |
334 | /* FALLTHROUGH */ | |
335 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
336 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
337 | omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); | |
338 | /* FALLTHROUGH */ | |
339 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
340 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
341 | omap_mux_init_signal("mm1_txse0", | |
342 | OMAP_PIN_INPUT_PULLDOWN); | |
343 | omap_mux_init_signal("mm1_txdat", | |
344 | OMAP_PIN_INPUT_PULLDOWN); | |
345 | break; | |
181b250c | 346 | case OMAP_USBHS_PORT_MODE_UNUSED: |
95344fcc AG |
347 | /* FALLTHROUGH */ |
348 | default: | |
349 | break; | |
350 | } | |
351 | switch (port_mode[1]) { | |
352 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
353 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
354 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
355 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
356 | omap_mux_init_signal("mm2_rxdp", | |
357 | OMAP_PIN_INPUT_PULLDOWN); | |
358 | omap_mux_init_signal("mm2_rxdm", | |
359 | OMAP_PIN_INPUT_PULLDOWN); | |
360 | /* FALLTHROUGH */ | |
361 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
362 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
363 | omap_mux_init_signal("mm2_rxrcv", | |
364 | OMAP_PIN_INPUT_PULLDOWN); | |
365 | /* FALLTHROUGH */ | |
366 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
367 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
368 | omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); | |
369 | /* FALLTHROUGH */ | |
370 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
371 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
372 | omap_mux_init_signal("mm2_txse0", | |
373 | OMAP_PIN_INPUT_PULLDOWN); | |
374 | omap_mux_init_signal("mm2_txdat", | |
375 | OMAP_PIN_INPUT_PULLDOWN); | |
376 | break; | |
181b250c | 377 | case OMAP_USBHS_PORT_MODE_UNUSED: |
95344fcc AG |
378 | /* FALLTHROUGH */ |
379 | default: | |
380 | break; | |
381 | } | |
382 | switch (port_mode[2]) { | |
383 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
384 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
385 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
386 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
387 | omap_mux_init_signal("mm3_rxdp", | |
388 | OMAP_PIN_INPUT_PULLDOWN); | |
389 | omap_mux_init_signal("mm3_rxdm", | |
390 | OMAP_PIN_INPUT_PULLDOWN); | |
391 | /* FALLTHROUGH */ | |
392 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
393 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
394 | omap_mux_init_signal("mm3_rxrcv", | |
395 | OMAP_PIN_INPUT_PULLDOWN); | |
396 | /* FALLTHROUGH */ | |
397 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
398 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
399 | omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); | |
400 | /* FALLTHROUGH */ | |
401 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
402 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
403 | omap_mux_init_signal("mm3_txse0", | |
404 | OMAP_PIN_INPUT_PULLDOWN); | |
405 | omap_mux_init_signal("mm3_txdat", | |
406 | OMAP_PIN_INPUT_PULLDOWN); | |
407 | break; | |
181b250c | 408 | case OMAP_USBHS_PORT_MODE_UNUSED: |
95344fcc AG |
409 | /* FALLTHROUGH */ |
410 | default: | |
411 | break; | |
412 | } | |
413 | } | |
414 | ||
1512f0db IG |
415 | static |
416 | void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) | |
2236396d KM |
417 | { |
418 | switch (port_mode[0]) { | |
419 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
420 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
421 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
422 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
423 | omap_mux_init_signal("usbb1_mm_rxdp", | |
424 | OMAP_PIN_INPUT_PULLDOWN); | |
425 | omap_mux_init_signal("usbb1_mm_rxdm", | |
426 | OMAP_PIN_INPUT_PULLDOWN); | |
427 | ||
428 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
429 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
430 | omap_mux_init_signal("usbb1_mm_rxrcv", | |
431 | OMAP_PIN_INPUT_PULLDOWN); | |
432 | ||
433 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
434 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
435 | omap_mux_init_signal("usbb1_mm_txen", | |
436 | OMAP_PIN_INPUT_PULLDOWN); | |
437 | ||
438 | ||
439 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
440 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
441 | omap_mux_init_signal("usbb1_mm_txdat", | |
442 | OMAP_PIN_INPUT_PULLDOWN); | |
443 | omap_mux_init_signal("usbb1_mm_txse0", | |
444 | OMAP_PIN_INPUT_PULLDOWN); | |
445 | break; | |
446 | ||
447 | case OMAP_USBHS_PORT_MODE_UNUSED: | |
448 | default: | |
449 | break; | |
450 | } | |
451 | ||
452 | switch (port_mode[1]) { | |
453 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
454 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
455 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
456 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
457 | omap_mux_init_signal("usbb2_mm_rxdp", | |
458 | OMAP_PIN_INPUT_PULLDOWN); | |
459 | omap_mux_init_signal("usbb2_mm_rxdm", | |
460 | OMAP_PIN_INPUT_PULLDOWN); | |
461 | ||
462 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
463 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
464 | omap_mux_init_signal("usbb2_mm_rxrcv", | |
465 | OMAP_PIN_INPUT_PULLDOWN); | |
466 | ||
467 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
468 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
469 | omap_mux_init_signal("usbb2_mm_txen", | |
470 | OMAP_PIN_INPUT_PULLDOWN); | |
471 | ||
472 | ||
473 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
474 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
475 | omap_mux_init_signal("usbb2_mm_txdat", | |
476 | OMAP_PIN_INPUT_PULLDOWN); | |
477 | omap_mux_init_signal("usbb2_mm_txse0", | |
478 | OMAP_PIN_INPUT_PULLDOWN); | |
479 | break; | |
480 | ||
481 | case OMAP_USBHS_PORT_MODE_UNUSED: | |
482 | default: | |
483 | break; | |
484 | } | |
485 | } | |
486 | ||
2236396d KM |
487 | void __init usbhs_init(const struct usbhs_omap_board_data *pdata) |
488 | { | |
50b2a9bd | 489 | struct omap_hwmod *oh[2]; |
abe763f2 | 490 | struct platform_device *pdev; |
50b2a9bd KM |
491 | int bus_id = -1; |
492 | int i; | |
2236396d KM |
493 | |
494 | for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { | |
495 | usbhs_data.port_mode[i] = pdata->port_mode[i]; | |
496 | ohci_data.port_mode[i] = pdata->port_mode[i]; | |
497 | ehci_data.port_mode[i] = pdata->port_mode[i]; | |
498 | ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; | |
499 | ehci_data.regulator[i] = pdata->regulator[i]; | |
500 | } | |
501 | ehci_data.phy_reset = pdata->phy_reset; | |
502 | ohci_data.es2_compatibility = pdata->es2_compatibility; | |
503 | usbhs_data.ehci_data = &ehci_data; | |
504 | usbhs_data.ohci_data = &ohci_data; | |
505 | ||
506 | if (cpu_is_omap34xx()) { | |
2236396d KM |
507 | setup_ehci_io_mux(pdata->port_mode); |
508 | setup_ohci_io_mux(pdata->port_mode); | |
509 | } else if (cpu_is_omap44xx()) { | |
2236396d KM |
510 | setup_4430ehci_io_mux(pdata->port_mode); |
511 | setup_4430ohci_io_mux(pdata->port_mode); | |
512 | } | |
513 | ||
50b2a9bd KM |
514 | oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); |
515 | if (!oh[0]) { | |
516 | pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME); | |
517 | return; | |
2236396d KM |
518 | } |
519 | ||
50b2a9bd KM |
520 | oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME); |
521 | if (!oh[1]) { | |
522 | pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME); | |
523 | return; | |
524 | } | |
2236396d | 525 | |
abe763f2 | 526 | pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, |
50b2a9bd KM |
527 | (void *)&usbhs_data, sizeof(usbhs_data), |
528 | omap_uhhtll_latency, | |
529 | ARRAY_SIZE(omap_uhhtll_latency), false); | |
abe763f2 | 530 | if (IS_ERR(pdev)) { |
50b2a9bd KM |
531 | pr_err("Could not build hwmod devices %s,%s\n", |
532 | USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); | |
533 | return; | |
534 | } | |
2236396d KM |
535 | } |
536 | ||
95344fcc AG |
537 | #else |
538 | ||
2236396d KM |
539 | void __init usbhs_init(const struct usbhs_omap_board_data *pdata) |
540 | { | |
541 | } | |
542 | ||
2236396d | 543 | #endif |