[deliverable/linux.git] / arch / arm / mach-orion5x / rd88f6183ap-ge-setup.c

/*
 * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
 *
 * Marvell Orion-1-90 AP GE Reference Design Setup
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/spi/flash.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"

static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
	.phy_addr	= -1,
	.speed		= SPEED_1000,
	.duplex		= DUPLEX_FULL,
};

static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
	.port_names[0]	= "lan1",
	.port_names[1]	= "lan2",
	.port_names[2]	= "lan3",
	.port_names[3]	= "lan4",
	.port_names[4]	= "wan",
	.port_names[5]	= "cpu",
};

static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
	.nr_chips	= 1,
	.chip		= &rd88f6183ap_ge_switch_chip_data,
};

static struct mtd_partition rd88f6183ap_ge_partitions[] = {
	{
		.name	= "kernel",
		.offset	= 0x00000000,
		.size	= 0x00200000,
	}, {
		.name	= "rootfs",
		.offset	= 0x00200000,
		.size	= 0x00500000,
	}, {
		.name	= "nvram",
		.offset	= 0x00700000,
		.size	= 0x00080000,
	},
};

static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
	.type		= "m25p64",
	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
	.parts		= rd88f6183ap_ge_partitions,
};

static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
	{
		.modalias	= "m25p80",
		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
		.irq		= NO_IRQ,
		.max_speed_hz	= 20000000,
		.bus_num	= 0,
		.chip_select	= 0,
	},
};

static void __init rd88f6183ap_ge_init(void)
{
	/*
	 * Setup basic Orion functions. Need to be called early.
	 */
	orion5x_init();

	/*
	 * Configure peripherals.
	 */
	orion5x_ehci0_init();
	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
				gpio_to_irq(3));
	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
	orion5x_spi_init();
	orion5x_uart0_init();
}

static struct hw_pci rd88f6183ap_ge_pci __initdata = {
	.nr_controllers	= 2,
	.swizzle	= pci_std_swizzle,
	.setup		= orion5x_pci_sys_setup,
	.scan		= orion5x_pci_sys_scan_bus,
	.map_irq	= orion5x_pci_map_irq,
};

static int __init rd88f6183ap_ge_pci_init(void)
{
	if (machine_is_rd88f6183ap_ge()) {
		orion5x_pci_disable();
		pci_common_init(&rd88f6183ap_ge_pci);
	}

	return 0;
}
subsys_initcall(rd88f6183ap_ge_pci_init);

MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
	.boot_params	= 0x00000100,
	.init_machine	= rd88f6183ap_ge_init,
	.map_io		= orion5x_map_io,
	.init_early	= orion5x_init_early,
	.init_irq	= orion5x_init_irq,
	.timer		= &orion5x_timer,
	.fixup		= tag_fixup_mem32,
MACHINE_END
Commit	Line	Data
0b0740c3 LB	1	/*
	2	* arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
	3	*
	4	* Marvell Orion-1-90 AP GE Reference Design Setup
	5	*
	6	* This file is licensed under the terms of the GNU General Public
	7	* License version 2. This program is licensed "as is" without any
	8	* warranty of any kind, whether express or implied.
	9	*/
	10
	11	#include <linux/kernel.h>
	12	#include <linux/init.h>
	13	#include <linux/platform_device.h>
	14	#include <linux/pci.h>
	15	#include <linux/irq.h>
	16	#include <linux/mtd/physmap.h>
	17	#include <linux/mv643xx_eth.h>
	18	#include <linux/spi/spi.h>
	19	#include <linux/spi/orion_spi.h>
	20	#include <linux/spi/flash.h>
	21	#include <linux/ethtool.h>
dcf1cece	22	#include <net/dsa.h>
0b0740c3 LB	23	#include <asm/mach-types.h>
	24	#include <asm/gpio.h>
	25	#include <asm/leds.h>
	26	#include <asm/mach/arch.h>
	27	#include <asm/mach/pci.h>
	28	#include <mach/orion5x.h>
	29	#include "common.h"
0b0740c3 LB	30
	31	static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
	32	.phy_addr = -1,
	33	.speed = SPEED_1000,
	34	.duplex = DUPLEX_FULL,
	35	};
	36
e84665c9	37	static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
dcf1cece LB	38	.port_names[0] = "lan1",
	39	.port_names[1] = "lan2",
	40	.port_names[2] = "lan3",
	41	.port_names[3] = "lan4",
	42	.port_names[4] = "wan",
	43	.port_names[5] = "cpu",
	44	};
	45
e84665c9 LB	46	static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
	47	.nr_chips = 1,
	48	.chip = &rd88f6183ap_ge_switch_chip_data,
	49	};
	50
0b0740c3 LB	51	static struct mtd_partition rd88f6183ap_ge_partitions[] = {
	52	{
	53	.name = "kernel",
	54	.offset = 0x00000000,
	55	.size = 0x00200000,
	56	}, {
	57	.name = "rootfs",
	58	.offset = 0x00200000,
	59	.size = 0x00500000,
	60	}, {
	61	.name = "nvram",
	62	.offset = 0x00700000,
	63	.size = 0x00080000,
	64	},
	65	};
	66
	67	static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
	68	.type = "m25p64",
	69	.nr_parts = ARRAY_SIZE(rd88f6183ap_ge_partitions),
	70	.parts = rd88f6183ap_ge_partitions,
	71	};
	72
	73	static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
	74	{
	75	.modalias = "m25p80",
	76	.platform_data = &rd88f6183ap_ge_spi_slave_data,
	77	.irq = NO_IRQ,
	78	.max_speed_hz = 20000000,
	79	.bus_num = 0,
	80	.chip_select = 0,
	81	},
	82	};
	83
	84	static void __init rd88f6183ap_ge_init(void)
	85	{
	86	/*
	87	* Setup basic Orion functions. Need to be called early.
	88	*/
	89	orion5x_init();
	90
	91	/*
	92	* Configure peripherals.
	93	*/
	94	orion5x_ehci0_init();
	95	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
e84665c9 LB	96	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
e84665c9 LB	97	gpio_to_irq(3));
0b0740c3 LB	98	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
	99	ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
	100	orion5x_spi_init();
	101	orion5x_uart0_init();
	102	}
	103
	104	static struct hw_pci rd88f6183ap_ge_pci __initdata = {
	105	.nr_controllers = 2,
	106	.swizzle = pci_std_swizzle,
	107	.setup = orion5x_pci_sys_setup,
	108	.scan = orion5x_pci_sys_scan_bus,
	109	.map_irq = orion5x_pci_map_irq,
	110	};
	111
	112	static int __init rd88f6183ap_ge_pci_init(void)
	113	{
	114	if (machine_is_rd88f6183ap_ge()) {
	115	orion5x_pci_disable();
	116	pci_common_init(&rd88f6183ap_ge_pci);
	117	}
	118
	119	return 0;
	120	}
	121	subsys_initcall(rd88f6183ap_ge_pci_init);
	122
	123	MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
	124	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
0b0740c3 LB	125	.boot_params = 0x00000100,
	126	.init_machine = rd88f6183ap_ge_init,
	127	.map_io = orion5x_map_io,
4ee1f6b5	128	.init_early = orion5x_init_early,
0b0740c3 LB	129	.init_irq = orion5x_init_irq,
	130	.timer = &orion5x_timer,
	131	.fixup = tag_fixup_mem32,
	132	MACHINE_END