[deliverable/linux.git] / arch / arm / mach-pxa / Kconfig

if ARCH_PXA

menu "Intel PXA2xx/PXA3xx Implementations"

comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"

config MACH_PXA3XX_DT
	bool "Support PXA3xx platforms from device tree"
	select CPU_PXA300
	select HAVE_PWM
	select POWER_SUPPLY
	select PXA3xx
	select USE_OF
	help
	  Include support for Marvell PXA3xx based platforms using
	  the device tree. Needn't select any other machine while
	  MACH_PXA3XX_DT is enabled.

config ARCH_LUBBOCK
	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
	select PXA25x
	select SA1111

config MACH_MAINSTONE
	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
	select HAVE_PWM
	select PXA27x

config MACH_ZYLONITE
	bool
	select HAVE_PWM
	select PXA3xx

config MACH_ZYLONITE300
	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
	select CPU_PXA300
	select CPU_PXA310
	select MACH_ZYLONITE

config MACH_ZYLONITE320
	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
	select CPU_PXA320
	select MACH_ZYLONITE

config MACH_LITTLETON
	bool "PXA3xx Form Factor Platform (aka Littleton)"
	select CPU_PXA300
	select CPU_PXA310
	select PXA3xx

config MACH_TAVOREVB
	bool "PXA930 Evaluation Board (aka TavorEVB)"
	select CPU_PXA930
	select CPU_PXA935
	select PXA3xx
	select FB
	select FB_PXA

config MACH_SAAR
	bool "PXA930 Handheld Platform (aka SAAR)"
	select CPU_PXA930
	select CPU_PXA935
	select PXA3xx
	select FB
	select FB_PXA

comment "Third Party Dev Platforms (sorted by vendor name)"

config ARCH_PXA_IDP
	bool "Accelent Xscale IDP"
	select PXA25x

config ARCH_VIPER
	bool "Arcom/Eurotech VIPER SBC"
	select ARCOM_PCMCIA
	select HAVE_PWM
	select I2C_GPIO
	select ISA
	select PXA25x
	select PXA_HAVE_ISA_IRQS

config MACH_ARCOM_ZEUS
	bool "Arcom/Eurotech ZEUS SBC"
	select ARCOM_PCMCIA
	select ISA
	select PXA27x
	select PXA_HAVE_ISA_IRQS

config MACH_BALLOON3
	bool "Balloon 3 board"
	select IWMMXT
	select PXA27x

config MACH_CSB726
	bool "Enable Cogent CSB726 System On a Module"
	select IWMMXT
	select PXA27x
	help
	  Say Y here if you intend to run this kernel on a Cogent
	  CSB726 System On Module.

config CSB726_CSB701
	bool "Enable support for CSB701 baseboard"
	depends on MACH_CSB726

config MACH_ARMCORE
	bool "CompuLab CM-X255/CM-X270 modules"
	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
	select IWMMXT
	select MIGHT_HAVE_PCI
	select NEED_MACH_IO_H if PCI
	select PXA25x
	select PXA27x

config MACH_EM_X270
	bool "CompuLab EM-x270 platform"
	select PXA27x

config MACH_EXEDA
	bool "CompuLab eXeda platform"
	select PXA27x

config MACH_CM_X300
	bool "CompuLab CM-X300 modules"
	select CPU_PXA300
	select CPU_PXA310
	select HAVE_PWM
	select PXA3xx

config MACH_CAPC7117
	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
	select CPU_PXA320
	select PXA3xx

config ARCH_GUMSTIX
	bool "Gumstix XScale 255 boards"
	select PXA25x
	help
	  Say Y here if you intend to run this kernel on
	  Basix, Connex, ws-200ax, ws-400ax systems

choice
	prompt "Gumstix Carrier/Expansion Board"
	depends on ARCH_GUMSTIX

config GUMSTIX_AM200EPD
	bool "Enable AM200EPD board support"

config GUMSTIX_AM300EPD
	bool "Enable AM300EPD board support"

endchoice

config MACH_INTELMOTE2
	bool "Intel Mote 2 Platform"
	select IWMMXT
	select PXA27x

config MACH_STARGATE2
	bool "Intel Stargate 2 Platform"
	select IWMMXT
	select PXA27x

config MACH_XCEP
	bool "Iskratel Electronics XCEP"
	select MTD
	select MTD_CFI
	select MTD_CFI_INTELEXT
	select MTD_PHYSMAP
	select PXA25x
	help
	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
	  Tuned for usage in Libera instruments for particle accelerators.

config TRIZEPS_PXA
	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
Commit	Line	Data
1da177e4 LT	1	if ARCH_PXA
1da177e4 LT	2
2c8086a5	3	menu "Intel PXA2xx/PXA3xx Implementations"
2c8086a5	4
de0710aa	5	comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
4036e1de	6
e7749a26 DM	7	config MACH_PXA3XX_DT
e7749a26 DM	8	bool "Support PXA3xx platforms from device tree"
e7749a26	9	select CPU_PXA300
e7749a26	10	select HAVE_PWM
b1b3f49c RK	11	select POWER_SUPPLY
b1b3f49c RK	12	select PXA3xx
e7749a26 DM	13	select USE_OF
	14	help
	15	Include support for Marvell PXA3xx based platforms using
	16	the device tree. Needn't select any other machine while
	17	MACH_PXA3XX_DT is enabled.
	18
1da177e4	19	config ARCH_LUBBOCK
de0710aa	20	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
1da177e4 LT	21	select PXA25x
	22	select SA1111
	23
de0710aa EM	24	config MACH_MAINSTONE
de0710aa EM	25	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
4a730719	26	select HAVE_PWM
b1b3f49c	27	select PXA27x
e9937d4b	28
de0710aa	29	config MACH_ZYLONITE
1493df73	30	bool
402e4909	31	select HAVE_PWM
b1b3f49c	32	select PXA3xx
1da177e4	33
1493df73 EM	34	config MACH_ZYLONITE300
	35	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
	36	select CPU_PXA300
	37	select CPU_PXA310
	38	select MACH_ZYLONITE
	39
	40	config MACH_ZYLONITE320
	41	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
	42	select CPU_PXA320
	43	select MACH_ZYLONITE
	44
de0710aa EM	45	config MACH_LITTLETON
de0710aa EM	46	bool "PXA3xx Form Factor Platform (aka Littleton)"
9a8a0c46 MV	47	select CPU_PXA300
9a8a0c46 MV	48	select CPU_PXA310
b1b3f49c	49	select PXA3xx
de0710aa EM	50
	51	config MACH_TAVOREVB
	52	bool "PXA930 Evaluation Board (aka TavorEVB)"
de0710aa	53	select CPU_PXA930
8cdde338	54	select CPU_PXA935
b1b3f49c	55	select PXA3xx
e914f19f AB	56	select FB
e914f19f AB	57	select FB_PXA
de0710aa EM	58
	59	config MACH_SAAR
	60	bool "PXA930 Handheld Platform (aka SAAR)"
de0710aa	61	select CPU_PXA930
8cdde338	62	select CPU_PXA935
b1b3f49c	63	select PXA3xx
e914f19f AB	64	select FB
e914f19f AB	65	select FB_PXA
de0710aa EM	66
	67	comment "Third Party Dev Platforms (sorted by vendor name)"
	68
	69	config ARCH_PXA_IDP
	70	bool "Accelent Xscale IDP"
49ea26d0	71	select PXA25x
1da177e4	72
de0710aa EM	73	config ARCH_VIPER
de0710aa EM	74	bool "Arcom/Eurotech VIPER SBC"
b1b3f49c	75	select ARCOM_PCMCIA
de0710aa	76	select HAVE_PWM
b1b3f49c RK	77	select I2C_GPIO
	78	select ISA
	79	select PXA25x
de0710aa EM	80	select PXA_HAVE_ISA_IRQS
de0710aa EM	81
e491a11c MZ	82	config MACH_ARCOM_ZEUS
e491a11c MZ	83	bool "Arcom/Eurotech ZEUS SBC"
b1b3f49c	84	select ARCOM_PCMCIA
e491a11c	85	select ISA
b1b3f49c	86	select PXA27x
e491a11c MZ	87	select PXA_HAVE_ISA_IRQS
e491a11c MZ	88
2a23ec36 JM	89	config MACH_BALLOON3
2a23ec36 JM	90	bool "Balloon 3 board"
2a23ec36	91	select IWMMXT
b1b3f49c	92	select PXA27x
2a23ec36	93
de0710aa EM	94	config MACH_CSB726
de0710aa EM	95	bool "Enable Cogent CSB726 System On a Module"
de0710aa	96	select IWMMXT
b1b3f49c	97	select PXA27x
1da177e4	98	help
de0710aa EM	99	Say Y here if you intend to run this kernel on a Cogent
de0710aa EM	100	CSB726 System On Module.
78731d33	101
de0710aa EM	102	config CSB726_CSB701
	103	bool "Enable support for CSB701 baseboard"
	104	depends on MACH_CSB726
45e2a9b4	105
de0710aa EM	106	config MACH_ARMCORE
de0710aa EM	107	bool "CompuLab CM-X255/CM-X270 modules"
58af4a24	108	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
de0710aa	109	select IWMMXT
0b05da72	110	select MIGHT_HAVE_PCI
1ac02d79	111	select NEED_MACH_IO_H if PCI
b1b3f49c RK	112	select PXA25x
b1b3f49c RK	113	select PXA27x
c7b4f5ba	114
de0710aa EM	115	config MACH_EM_X270
de0710aa EM	116	bool "CompuLab EM-x270 platform"
c7b4f5ba	117	select PXA27x
c7b4f5ba	118
de0710aa EM	119	config MACH_EXEDA
de0710aa EM	120	bool "CompuLab eXeda platform"
c7b4f5ba	121	select PXA27x
c7b4f5ba	122
de0710aa EM	123	config MACH_CM_X300
de0710aa EM	124	bool "CompuLab CM-X300 modules"
de0710aa	125	select CPU_PXA300
61e0ac03 IG	126	select CPU_PXA310
61e0ac03 IG	127	select HAVE_PWM
b1b3f49c	128	select PXA3xx
c7b4f5ba	129
1f3b536b EP	130	config MACH_CAPC7117
	131	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
	132	select CPU_PXA320
	133	select PXA3xx
	134
de0710aa EM	135	config ARCH_GUMSTIX
de0710aa EM	136	bool "Gumstix XScale 255 boards"
352699a3	137	select PXA25x
de0710aa EM	138	help
	139	Say Y here if you intend to run this kernel on
	140	Basix, Connex, ws-200ax, ws-400ax systems
c7b4f5ba	141
de0710aa EM	142	choice
	143	prompt "Gumstix Carrier/Expansion Board"
	144	depends on ARCH_GUMSTIX
3abcd199	145
de0710aa EM	146	config GUMSTIX_AM200EPD
de0710aa EM	147	bool "Enable AM200EPD board support"
3abcd199	148
de0710aa EM	149	config GUMSTIX_AM300EPD
de0710aa EM	150	bool "Enable AM300EPD board support"
b3d354b8	151
de0710aa	152	endchoice
3abcd199	153
de0710aa EM	154	config MACH_INTELMOTE2
de0710aa EM	155	bool "Intel Mote 2 Platform"
de0710aa	156	select IWMMXT
b1b3f49c	157	select PXA27x
3abcd199	158
de0710aa EM	159	config MACH_STARGATE2
de0710aa EM	160	bool "Intel Stargate 2 Platform"
de0710aa	161	select IWMMXT
b1b3f49c	162	select PXA27x
3abcd199	163
de0710aa EM	164	config MACH_XCEP
de0710aa EM	165	bool "Iskratel Electronics XCEP"
de0710aa	166	select MTD
de0710aa	167	select MTD_CFI
b1b3f49c	168	select MTD_CFI_INTELEXT
b1b3f49c RK	169	select MTD_PHYSMAP
b1b3f49c RK	170	select PXA25x
3abcd199	171	help
de0710aa EM	172	PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
de0710aa EM	173	Tuned for usage in Libera instruments for particle accelerators.
3abcd199	174
642aa663 JS	175	config TRIZEPS_PXA
	176	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
	177