projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ARM / PXA: Use struct syscore_ops for "core" power management
[deliverable/linux.git] / arch / arm / mach-pxa / cm-x270.c
CommitLineData
4adc5fb6
MR		 1/*
2 * linux/arch/arm/mach-pxa/cm-x270.c
3 *
4 * Copyright (C) 2007, 2008 CompuLab, Ltd.
5 * Mike Rapoport <mike@compulab.co.il>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/platform_device.h>
4adc5fb6
MR		 13#include <linux/irq.h>
14#include <linux/gpio.h>
a2099e49 15#include <linux/delay.h>
4adc5fb6
MR		 16
17#include <linux/rtc-v3020.h>
18#include <video/mbxfb.h>
19
a2099e49 20#include <linux/spi/spi.h>
8348c259 21#include <linux/spi/pxa2xx_spi.h>
a2099e49
MR		 22#include <linux/spi/libertas_spi.h>
23
51c62982 24#include <mach/pxa27x.h>
4adc5fb6
MR		 25#include <mach/ohci.h>
26#include <mach/mmc.h>
27
28#include "generic.h"
29
30/* physical address if local-bus attached devices */
31#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
32
33/* GPIO IRQ usage */
34#define GPIO83_MMC_IRQ (83)
35
36#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
37
38/* MMC power enable */
39#define GPIO105_MMC_POWER (105)
40
a2099e49
MR		 41/* WLAN GPIOS */
42#define GPIO19_WLAN_STRAP (19)
43#define GPIO102_WLAN_RST (102)
44
4adc5fb6
MR		 45static unsigned long cmx270_pin_config[] = {
46 /* AC'97 */
47 GPIO28_AC97_BITCLK,
48 GPIO29_AC97_SDATA_IN_0,
49 GPIO30_AC97_SDATA_OUT,
50 GPIO31_AC97_SYNC,
51 GPIO98_AC97_SYSCLK,
52 GPIO113_AC97_nRESET,
53
54 /* BTUART */
55 GPIO42_BTUART_RXD,
56 GPIO43_BTUART_TXD,
57 GPIO44_BTUART_CTS,
58 GPIO45_BTUART_RTS,
59
60 /* STUART */
61 GPIO46_STUART_RXD,
62 GPIO47_STUART_TXD,
63
64 /* MCI controller */
65 GPIO32_MMC_CLK,
66 GPIO112_MMC_CMD,
67 GPIO92_MMC_DAT_0,
68 GPIO109_MMC_DAT_1,
69 GPIO110_MMC_DAT_2,
70 GPIO111_MMC_DAT_3,
71
72 /* LCD */
bedbda97 73 GPIOxx_LCD_TFT_16BPP,
4adc5fb6
MR		 74
75 /* I2C */
76 GPIO117_I2C_SCL,
77 GPIO118_I2C_SDA,
78
79 /* SSP1 */
80 GPIO23_SSP1_SCLK,
81 GPIO24_SSP1_SFRM,
82 GPIO25_SSP1_TXD,
83 GPIO26_SSP1_RXD,
84
85 /* SSP2 */
a2099e49
MR		 86 GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
87 GPIO14_GPIO,
4adc5fb6
MR		 88 GPIO87_SSP2_TXD,
89 GPIO88_SSP2_RXD,
90
91 /* PC Card */
92 GPIO48_nPOE,
93 GPIO49_nPWE,
94 GPIO50_nPIOR,
95 GPIO51_nPIOW,
96 GPIO85_nPCE_1,
97 GPIO54_nPCE_2,
98 GPIO55_nPREG,
99 GPIO56_nPWAIT,
100 GPIO57_nIOIS16,
101
102 /* SDRAM and local bus */
103 GPIO15_nCS_1,
104 GPIO78_nCS_2,
105 GPIO79_nCS_3,
106 GPIO80_nCS_4,
107 GPIO33_nCS_5,
108 GPIO49_nPWE,
109 GPIO18_RDY,
110
111 /* GPIO */
112 GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
113 GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
114 GPIO53_GPIO, /* PC card reset */
a2099e49 115 GPIO102_GPIO, /* WLAN reset */
4adc5fb6
MR		 116
117 /* NAND controls */
118 GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
119 GPIO89_GPIO, /* NAND Ready/Busy */
120
121 /* interrupts */
122 GPIO10_GPIO, /* DM9000 interrupt */
123 GPIO83_GPIO, /* MMC card detect */
a2099e49 124 GPIO95_GPIO, /* WLAN interrupt */
4adc5fb6
MR		 125};
126
127/* V3020 RTC */
128#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
129static struct resource cmx270_v3020_resource[] = {
130 [0] = {
131 .start = RTC_PHYS_BASE,
132 .end = RTC_PHYS_BASE + 4,
133 .flags = IORESOURCE_MEM,
134 },
135};
136
137struct v3020_platform_data cmx270_v3020_pdata = {
138 .leftshift = 16,
139};
140
141static struct platform_device cmx270_rtc_device = {
142 .name = "v3020",
143 .num_resources = ARRAY_SIZE(cmx270_v3020_resource),
144 .resource = cmx270_v3020_resource,
145 .id = -1,
146 .dev = {
147 .platform_data = &cmx270_v3020_pdata,
148 }
149};
150
151static void __init cmx270_init_rtc(void)
152{
153 platform_device_register(&cmx270_rtc_device);
154}
155#else
598dca1f 156static inline void cmx270_init_rtc(void) {}
4adc5fb6
MR		 157#endif
158
159/* 2700G graphics */
160#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
161static u64 fb_dma_mask = ~(u64)0;
162
163static struct resource cmx270_2700G_resource[] = {
164 /* frame buffer memory including ODFB and External SDRAM */
165 [0] = {
166 .start = PXA_CS2_PHYS,
167 .end = PXA_CS2_PHYS + 0x01ffffff,
168 .flags = IORESOURCE_MEM,
169 },
170 /* Marathon registers */
171 [1] = {
172 .start = PXA_CS2_PHYS + 0x03fe0000,
173 .end = PXA_CS2_PHYS + 0x03ffffff,
174 .flags = IORESOURCE_MEM,
175 },
176};
177
96f6a13a
EM		 178static unsigned long cmx270_marathon_on[] = {
179 GPIO58_GPIO,
180 GPIO59_GPIO,
181 GPIO60_GPIO,
182 GPIO61_GPIO,
183 GPIO62_GPIO,
184 GPIO63_GPIO,
185 GPIO64_GPIO,
186 GPIO65_GPIO,
187 GPIO66_GPIO,
188 GPIO67_GPIO,
189 GPIO68_GPIO,
190 GPIO69_GPIO,
191 GPIO70_GPIO,
192 GPIO71_GPIO,
193 GPIO72_GPIO,
194 GPIO73_GPIO,
195 GPIO74_GPIO,
196 GPIO75_GPIO,
197 GPIO76_GPIO,
198 GPIO77_GPIO,
199};
200
201static unsigned long cmx270_marathon_off[] = {
202 GPIOxx_LCD_TFT_16BPP,
203};
4adc5fb6
MR		 204
205static int cmx270_marathon_probe(struct fb_info *fb)
206{
96f6a13a
EM		 207 int gpio, err;
208
209 for (gpio = 58; gpio <= 77; gpio++) {
210 err = gpio_request(gpio, "LCD");
211 if (err)
212 return err;
213 gpio_direction_input(gpio);
214 }
215
216 pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
4adc5fb6
MR		 217 return 0;
218}
219
220static int cmx270_marathon_remove(struct fb_info *fb)
221{
96f6a13a
EM		 222 int gpio;
223
224 pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
225
226 for (gpio = 58; gpio <= 77; gpio++)
227 gpio_free(gpio);
228
4adc5fb6
MR		 229 return 0;
230}
231
232static struct mbxfb_platform_data cmx270_2700G_data = {
233 .xres = {
234 .min = 240,
235 .max = 1200,
236 .defval = 640,
237 },
238 .yres = {
239 .min = 240,
240 .max = 1200,
241 .defval = 480,
242 },
243 .bpp = {
244 .min = 16,
245 .max = 32,
246 .defval = 16,
247 },
248 .memsize = 8*1024*1024,
249 .probe = cmx270_marathon_probe,
250 .remove = cmx270_marathon_remove,
251};
252
253static struct platform_device cmx270_2700G = {
254 .name = "mbx-fb",
255 .dev = {
256 .platform_data = &cmx270_2700G_data,
257 .dma_mask = &fb_dma_mask,
258 .coherent_dma_mask = 0xffffffff,
259 },
260 .num_resources = ARRAY_SIZE(cmx270_2700G_resource),
261 .resource = cmx270_2700G_resource,
262 .id = -1,
263};
264
265static void __init cmx270_init_2700G(void)
266{
267 platform_device_register(&cmx270_2700G);
268}
269#else
270static inline void cmx270_init_2700G(void) {}
271#endif
272
273/* PXA27x OHCI controller setup */
274#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
4adc5fb6
MR		 275static struct pxaohci_platform_data cmx270_ohci_platform_data = {
276 .port_mode = PMM_PERPORT_MODE,
097b5334 277 .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
4adc5fb6
MR		 278};
279
280static void __init cmx270_init_ohci(void)
281{
282 pxa_set_ohci_info(&cmx270_ohci_platform_data);
283}
284#else
285static inline void cmx270_init_ohci(void) {}
286#endif
287
288#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
4adc5fb6 289static struct pxamci_platform_data cmx270_mci_platform_data = {
7a648256
RJ		 290 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
291 .gpio_card_detect = GPIO83_MMC_IRQ,
292 .gpio_card_ro = -1,
293 .gpio_power = GPIO105_MMC_POWER,
294 .gpio_power_invert = 1,
4adc5fb6
MR		 295};
296
297static void __init cmx270_init_mmc(void)
298{
299 pxa_set_mci_info(&cmx270_mci_platform_data);
300}
301#else
302static inline void cmx270_init_mmc(void) {}
303#endif
304
a2099e49
MR		 305#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
306static struct pxa2xx_spi_master cm_x270_spi_info = {
307 .num_chipselect = 1,
308 .enable_dma = 1,
309};
310
311static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
312 .rx_threshold = 1,
313 .tx_threshold = 1,
314 .timeout = 1000,
315 .gpio_cs = 14,
316};
317
318static unsigned long cm_x270_libertas_pin_config[] = {
319 /* SSP2 */
320 GPIO19_SSP2_SCLK,
321 GPIO14_GPIO,
322 GPIO87_SSP2_TXD,
323 GPIO88_SSP2_RXD,
324
325};
326
327static int cm_x270_libertas_setup(struct spi_device *spi)
328{
329 int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
330 if (err)
331 return err;
332
333 err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
334 if (err)
335 goto err_free_strap;
336
337 err = gpio_direction_output(GPIO102_WLAN_RST, 0);
338 if (err)
339 goto err_free_strap;
340 msleep(100);
341
342 err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
343 if (err)
344 goto err_free_strap;
345 msleep(100);
346
347 pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
348
349 gpio_set_value(GPIO102_WLAN_RST, 1);
350 msleep(100);
351
352 spi->bits_per_word = 16;
353 spi_setup(spi);
354
355 return 0;
356
357err_free_strap:
358 gpio_free(GPIO19_WLAN_STRAP);
359
360 return err;
361}
362
363static int cm_x270_libertas_teardown(struct spi_device *spi)
364{
365 gpio_set_value(GPIO102_WLAN_RST, 0);
366 gpio_free(GPIO102_WLAN_RST);
367 gpio_free(GPIO19_WLAN_STRAP);
368
369 return 0;
370}
371
372struct libertas_spi_platform_data cm_x270_libertas_pdata = {
373 .use_dummy_writes = 1,
374 .setup = cm_x270_libertas_setup,
375 .teardown = cm_x270_libertas_teardown,
376};
377
378static struct spi_board_info cm_x270_spi_devices[] __initdata = {
379 {
380 .modalias = "libertas_spi",
381 .max_speed_hz = 13000000,
382 .bus_num = 2,
383 .irq = gpio_to_irq(95),
384 .chip_select = 0,
385 .controller_data = &cm_x270_libertas_chip,
386 .platform_data = &cm_x270_libertas_pdata,
387 },
388};
389
390static void __init cmx270_init_spi(void)
391{
392 pxa2xx_set_spi_info(2, &cm_x270_spi_info);
393 spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
394}
395#else
396static inline void cmx270_init_spi(void) {}
397#endif
398
4adc5fb6
MR		 399void __init cmx270_init(void)
400{
401 pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
402
9599d1db
MR		 403#ifdef CONFIG_PM
404 pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
405#endif
406
4adc5fb6
MR		 407 cmx270_init_rtc();
408 cmx270_init_mmc();
409 cmx270_init_ohci();
410 cmx270_init_2700G();
a2099e49 411 cmx270_init_spi();
4adc5fb6 412}
Linux kernel - Deliverables
This page took 0.175186 seconds and 5 git commands to generate.