Commit | Line | Data |
---|---|---|
3d50527b | 1 | /* |
3c85bce6 | 2 | * Support for CompuLab EM-X270 platform |
3d50527b | 3 | * |
3c85bce6 | 4 | * Copyright (C) 2007, 2008 CompuLab, Ltd. |
3d50527b MR |
5 | * Author: Mike Rapoport <mike@compulab.co.il> |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | #include <linux/irq.h> | |
13 | #include <linux/platform_device.h> | |
14 | ||
15 | #include <linux/dm9000.h> | |
16 | #include <linux/rtc-v3020.h> | |
3d50527b MR |
17 | #include <linux/mtd/nand.h> |
18 | #include <linux/mtd/partitions.h> | |
28c88046 | 19 | #include <linux/mtd/physmap.h> |
3c85bce6 MR |
20 | #include <linux/input.h> |
21 | #include <linux/gpio_keys.h> | |
22 | #include <linux/gpio.h> | |
28c88046 MR |
23 | #include <linux/mfd/da903x.h> |
24 | #include <linux/regulator/machine.h> | |
25 | #include <linux/spi/spi.h> | |
26 | #include <linux/spi/tdo24m.h> | |
9f055c49 MR |
27 | #include <linux/power_supply.h> |
28 | #include <linux/apm-emulation.h> | |
28c88046 MR |
29 | |
30 | #include <media/soc_camera.h> | |
3d50527b MR |
31 | |
32 | #include <asm/mach-types.h> | |
3d50527b MR |
33 | #include <asm/mach/arch.h> |
34 | ||
a09e64fb RK |
35 | #include <mach/mfp-pxa27x.h> |
36 | #include <mach/pxa-regs.h> | |
37 | #include <mach/pxa27x-udc.h> | |
38 | #include <mach/audio.h> | |
39 | #include <mach/pxafb.h> | |
40 | #include <mach/ohci.h> | |
41 | #include <mach/mmc.h> | |
42 | #include <mach/pxa27x_keypad.h> | |
28c88046 MR |
43 | #include <mach/i2c.h> |
44 | #include <mach/camera.h> | |
45 | #include <mach/pxa2xx_spi.h> | |
3d50527b MR |
46 | |
47 | #include "generic.h" | |
6432f46c | 48 | #include "devices.h" |
3d50527b MR |
49 | |
50 | /* GPIO IRQ usage */ | |
3c85bce6 MR |
51 | #define GPIO41_ETHIRQ (41) |
52 | #define GPIO13_MMC_CD (13) | |
53 | #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) | |
3c85bce6 MR |
54 | |
55 | /* NAND control GPIOs */ | |
56 | #define GPIO11_NAND_CS (11) | |
57 | #define GPIO56_NAND_RB (56) | |
58 | ||
28c88046 MR |
59 | /* Miscelaneous GPIOs */ |
60 | #define GPIO93_CAM_RESET (93) | |
6432f46c | 61 | #define GPIO95_MMC_WP (95) |
28c88046 | 62 | |
4a697e83 MR |
63 | static int mmc_cd; |
64 | static int nand_rb; | |
65 | static int dm9000_flags; | |
66 | ||
67 | static unsigned long common_pin_config[] = { | |
3c85bce6 MR |
68 | /* AC'97 */ |
69 | GPIO28_AC97_BITCLK, | |
70 | GPIO29_AC97_SDATA_IN_0, | |
71 | GPIO30_AC97_SDATA_OUT, | |
72 | GPIO31_AC97_SYNC, | |
73 | GPIO98_AC97_SYSCLK, | |
74 | GPIO113_AC97_nRESET, | |
75 | ||
76 | /* BTUART */ | |
77 | GPIO42_BTUART_RXD, | |
78 | GPIO43_BTUART_TXD, | |
79 | GPIO44_BTUART_CTS, | |
80 | GPIO45_BTUART_RTS, | |
81 | ||
82 | /* STUART */ | |
83 | GPIO46_STUART_RXD, | |
84 | GPIO47_STUART_TXD, | |
85 | ||
86 | /* MCI controller */ | |
87 | GPIO32_MMC_CLK, | |
88 | GPIO112_MMC_CMD, | |
89 | GPIO92_MMC_DAT_0, | |
90 | GPIO109_MMC_DAT_1, | |
91 | GPIO110_MMC_DAT_2, | |
92 | GPIO111_MMC_DAT_3, | |
93 | ||
94 | /* LCD */ | |
95 | GPIO58_LCD_LDD_0, | |
96 | GPIO59_LCD_LDD_1, | |
97 | GPIO60_LCD_LDD_2, | |
98 | GPIO61_LCD_LDD_3, | |
99 | GPIO62_LCD_LDD_4, | |
100 | GPIO63_LCD_LDD_5, | |
101 | GPIO64_LCD_LDD_6, | |
102 | GPIO65_LCD_LDD_7, | |
103 | GPIO66_LCD_LDD_8, | |
104 | GPIO67_LCD_LDD_9, | |
105 | GPIO68_LCD_LDD_10, | |
106 | GPIO69_LCD_LDD_11, | |
107 | GPIO70_LCD_LDD_12, | |
108 | GPIO71_LCD_LDD_13, | |
109 | GPIO72_LCD_LDD_14, | |
110 | GPIO73_LCD_LDD_15, | |
111 | GPIO74_LCD_FCLK, | |
112 | GPIO75_LCD_LCLK, | |
113 | GPIO76_LCD_PCLK, | |
114 | GPIO77_LCD_BIAS, | |
115 | ||
116 | /* QCI */ | |
117 | GPIO84_CIF_FV, | |
118 | GPIO25_CIF_LV, | |
119 | GPIO53_CIF_MCLK, | |
120 | GPIO54_CIF_PCLK, | |
121 | GPIO81_CIF_DD_0, | |
122 | GPIO55_CIF_DD_1, | |
123 | GPIO51_CIF_DD_2, | |
124 | GPIO50_CIF_DD_3, | |
125 | GPIO52_CIF_DD_4, | |
126 | GPIO48_CIF_DD_5, | |
127 | GPIO17_CIF_DD_6, | |
128 | GPIO12_CIF_DD_7, | |
129 | ||
130 | /* I2C */ | |
131 | GPIO117_I2C_SCL, | |
132 | GPIO118_I2C_SDA, | |
133 | ||
134 | /* Keypad */ | |
135 | GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, | |
136 | GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, | |
137 | GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, | |
138 | GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, | |
139 | GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, | |
140 | GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, | |
141 | GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, | |
142 | GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH, | |
143 | GPIO103_KP_MKOUT_0, | |
144 | GPIO104_KP_MKOUT_1, | |
145 | GPIO105_KP_MKOUT_2, | |
146 | GPIO106_KP_MKOUT_3, | |
147 | GPIO107_KP_MKOUT_4, | |
148 | GPIO108_KP_MKOUT_5, | |
149 | GPIO96_KP_MKOUT_6, | |
150 | GPIO22_KP_MKOUT_7, | |
151 | ||
152 | /* SSP1 */ | |
153 | GPIO26_SSP1_RXD, | |
154 | GPIO23_SSP1_SCLK, | |
155 | GPIO24_SSP1_SFRM, | |
156 | GPIO57_SSP1_TXD, | |
157 | ||
158 | /* SSP2 */ | |
159 | GPIO19_SSP2_SCLK, | |
160 | GPIO14_SSP2_SFRM, | |
161 | GPIO89_SSP2_TXD, | |
162 | GPIO88_SSP2_RXD, | |
163 | ||
164 | /* SDRAM and local bus */ | |
165 | GPIO15_nCS_1, | |
166 | GPIO78_nCS_2, | |
167 | GPIO79_nCS_3, | |
168 | GPIO80_nCS_4, | |
169 | GPIO49_nPWE, | |
170 | GPIO18_RDY, | |
171 | ||
172 | /* GPIO */ | |
6432f46c | 173 | GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ |
3c85bce6 MR |
174 | |
175 | /* power controls */ | |
176 | GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ | |
28c88046 | 177 | GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ |
3c85bce6 MR |
178 | GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ |
179 | ||
180 | /* NAND controls */ | |
181 | GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ | |
3c85bce6 MR |
182 | |
183 | /* interrupts */ | |
3c85bce6 MR |
184 | GPIO41_GPIO, /* DM9000 interrupt */ |
185 | }; | |
3d50527b | 186 | |
4a697e83 MR |
187 | static unsigned long em_x270_pin_config[] = { |
188 | GPIO13_GPIO, /* MMC card detect */ | |
189 | GPIO56_GPIO, /* NAND Ready/Busy */ | |
190 | GPIO95_GPIO, /* MMC Write protect */ | |
191 | }; | |
192 | ||
3c85bce6 MR |
193 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) |
194 | static struct resource em_x270_dm9000_resource[] = { | |
3d50527b MR |
195 | [0] = { |
196 | .start = PXA_CS2_PHYS, | |
197 | .end = PXA_CS2_PHYS + 3, | |
198 | .flags = IORESOURCE_MEM, | |
199 | }, | |
200 | [1] = { | |
201 | .start = PXA_CS2_PHYS + 8, | |
202 | .end = PXA_CS2_PHYS + 8 + 0x3f, | |
203 | .flags = IORESOURCE_MEM, | |
204 | }, | |
205 | [2] = { | |
206 | .start = EM_X270_ETHIRQ, | |
207 | .end = EM_X270_ETHIRQ, | |
3c85bce6 | 208 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
3d50527b MR |
209 | } |
210 | }; | |
211 | ||
3c85bce6 | 212 | static struct dm9000_plat_data em_x270_dm9000_platdata = { |
4a697e83 | 213 | .flags = DM9000_PLATF_NO_EEPROM, |
3d50527b MR |
214 | }; |
215 | ||
3c85bce6 | 216 | static struct platform_device em_x270_dm9000 = { |
3d50527b MR |
217 | .name = "dm9000", |
218 | .id = 0, | |
3c85bce6 MR |
219 | .num_resources = ARRAY_SIZE(em_x270_dm9000_resource), |
220 | .resource = em_x270_dm9000_resource, | |
3d50527b | 221 | .dev = { |
3c85bce6 | 222 | .platform_data = &em_x270_dm9000_platdata, |
3d50527b MR |
223 | } |
224 | }; | |
225 | ||
3c85bce6 MR |
226 | static void __init em_x270_init_dm9000(void) |
227 | { | |
4a697e83 | 228 | em_x270_dm9000_platdata.flags |= dm9000_flags; |
3c85bce6 MR |
229 | platform_device_register(&em_x270_dm9000); |
230 | } | |
231 | #else | |
232 | static inline void em_x270_init_dm9000(void) {} | |
233 | #endif | |
3d50527b | 234 | |
3c85bce6 MR |
235 | /* V3020 RTC */ |
236 | #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) | |
3d50527b MR |
237 | static struct resource em_x270_v3020_resource[] = { |
238 | [0] = { | |
239 | .start = PXA_CS4_PHYS, | |
240 | .end = PXA_CS4_PHYS + 3, | |
241 | .flags = IORESOURCE_MEM, | |
242 | }, | |
243 | }; | |
244 | ||
245 | static struct v3020_platform_data em_x270_v3020_platdata = { | |
246 | .leftshift = 0, | |
247 | }; | |
248 | ||
249 | static struct platform_device em_x270_rtc = { | |
250 | .name = "v3020", | |
251 | .num_resources = ARRAY_SIZE(em_x270_v3020_resource), | |
252 | .resource = em_x270_v3020_resource, | |
253 | .id = -1, | |
254 | .dev = { | |
255 | .platform_data = &em_x270_v3020_platdata, | |
256 | } | |
257 | }; | |
258 | ||
3c85bce6 MR |
259 | static void __init em_x270_init_rtc(void) |
260 | { | |
261 | platform_device_register(&em_x270_rtc); | |
262 | } | |
263 | #else | |
264 | static inline void em_x270_init_rtc(void) {} | |
265 | #endif | |
3d50527b | 266 | |
3c85bce6 MR |
267 | /* NAND flash */ |
268 | #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) | |
3d50527b MR |
269 | static inline void nand_cs_on(void) |
270 | { | |
3c85bce6 | 271 | gpio_set_value(GPIO11_NAND_CS, 0); |
3d50527b MR |
272 | } |
273 | ||
274 | static void nand_cs_off(void) | |
275 | { | |
276 | dsb(); | |
277 | ||
3c85bce6 | 278 | gpio_set_value(GPIO11_NAND_CS, 1); |
3d50527b MR |
279 | } |
280 | ||
281 | /* hardware specific access to control-lines */ | |
282 | static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, | |
283 | unsigned int ctrl) | |
284 | { | |
285 | struct nand_chip *this = mtd->priv; | |
286 | unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; | |
287 | ||
288 | dsb(); | |
289 | ||
290 | if (ctrl & NAND_CTRL_CHANGE) { | |
291 | if (ctrl & NAND_ALE) | |
292 | nandaddr |= (1 << 3); | |
293 | else | |
294 | nandaddr &= ~(1 << 3); | |
295 | if (ctrl & NAND_CLE) | |
296 | nandaddr |= (1 << 2); | |
297 | else | |
298 | nandaddr &= ~(1 << 2); | |
299 | if (ctrl & NAND_NCE) | |
300 | nand_cs_on(); | |
301 | else | |
302 | nand_cs_off(); | |
303 | } | |
304 | ||
305 | dsb(); | |
306 | this->IO_ADDR_W = (void __iomem *)nandaddr; | |
307 | if (dat != NAND_CMD_NONE) | |
308 | writel(dat, this->IO_ADDR_W); | |
309 | ||
310 | dsb(); | |
311 | } | |
312 | ||
313 | /* read device ready pin */ | |
314 | static int em_x270_nand_device_ready(struct mtd_info *mtd) | |
315 | { | |
316 | dsb(); | |
317 | ||
4a697e83 | 318 | return gpio_get_value(nand_rb); |
3d50527b MR |
319 | } |
320 | ||
321 | static struct mtd_partition em_x270_partition_info[] = { | |
322 | [0] = { | |
323 | .name = "em_x270-0", | |
324 | .offset = 0, | |
325 | .size = SZ_4M, | |
326 | }, | |
327 | [1] = { | |
328 | .name = "em_x270-1", | |
329 | .offset = MTDPART_OFS_APPEND, | |
330 | .size = MTDPART_SIZ_FULL | |
331 | }, | |
332 | }; | |
333 | ||
334 | static const char *em_x270_part_probes[] = { "cmdlinepart", NULL }; | |
335 | ||
336 | struct platform_nand_data em_x270_nand_platdata = { | |
337 | .chip = { | |
338 | .nr_chips = 1, | |
339 | .chip_offset = 0, | |
340 | .nr_partitions = ARRAY_SIZE(em_x270_partition_info), | |
341 | .partitions = em_x270_partition_info, | |
342 | .chip_delay = 20, | |
343 | .part_probe_types = em_x270_part_probes, | |
344 | }, | |
345 | .ctrl = { | |
346 | .hwcontrol = 0, | |
347 | .dev_ready = em_x270_nand_device_ready, | |
348 | .select_chip = 0, | |
349 | .cmd_ctrl = em_x270_nand_cmd_ctl, | |
350 | }, | |
351 | }; | |
352 | ||
353 | static struct resource em_x270_nand_resource[] = { | |
354 | [0] = { | |
355 | .start = PXA_CS1_PHYS, | |
356 | .end = PXA_CS1_PHYS + 12, | |
357 | .flags = IORESOURCE_MEM, | |
358 | }, | |
359 | }; | |
360 | ||
361 | static struct platform_device em_x270_nand = { | |
362 | .name = "gen_nand", | |
363 | .num_resources = ARRAY_SIZE(em_x270_nand_resource), | |
364 | .resource = em_x270_nand_resource, | |
365 | .id = -1, | |
366 | .dev = { | |
367 | .platform_data = &em_x270_nand_platdata, | |
368 | } | |
369 | }; | |
370 | ||
3c85bce6 MR |
371 | static void __init em_x270_init_nand(void) |
372 | { | |
373 | int err; | |
3d50527b | 374 | |
3c85bce6 MR |
375 | err = gpio_request(GPIO11_NAND_CS, "NAND CS"); |
376 | if (err) { | |
377 | pr_warning("EM-X270: failed to request NAND CS gpio\n"); | |
378 | return; | |
379 | } | |
380 | ||
381 | gpio_direction_output(GPIO11_NAND_CS, 1); | |
382 | ||
4a697e83 | 383 | err = gpio_request(nand_rb, "NAND R/B"); |
3c85bce6 MR |
384 | if (err) { |
385 | pr_warning("EM-X270: failed to request NAND R/B gpio\n"); | |
386 | gpio_free(GPIO11_NAND_CS); | |
387 | return; | |
388 | } | |
389 | ||
4a697e83 | 390 | gpio_direction_input(nand_rb); |
3c85bce6 MR |
391 | |
392 | platform_device_register(&em_x270_nand); | |
393 | } | |
394 | #else | |
395 | static inline void em_x270_init_nand(void) {} | |
396 | #endif | |
3d50527b | 397 | |
28c88046 MR |
398 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
399 | static struct mtd_partition em_x270_nor_parts[] = { | |
400 | { | |
401 | .name = "Bootloader", | |
402 | .offset = 0x00000000, | |
403 | .size = 0x00050000, | |
404 | .mask_flags = MTD_WRITEABLE /* force read-only */ | |
405 | }, { | |
406 | .name = "Environment", | |
407 | .offset = 0x00050000, | |
408 | .size = 0x00010000, | |
409 | }, { | |
410 | .name = "Reserved", | |
411 | .offset = 0x00060000, | |
412 | .size = 0x00050000, | |
413 | .mask_flags = MTD_WRITEABLE /* force read-only */ | |
414 | }, { | |
415 | .name = "Splashscreen", | |
416 | .offset = 0x000b0000, | |
417 | .size = 0x00050000, | |
418 | } | |
419 | }; | |
420 | ||
421 | static struct physmap_flash_data em_x270_nor_data[] = { | |
422 | [0] = { | |
423 | .width = 2, | |
424 | .parts = em_x270_nor_parts, | |
425 | .nr_parts = ARRAY_SIZE(em_x270_nor_parts), | |
426 | }, | |
427 | }; | |
428 | ||
429 | static struct resource em_x270_nor_flash_resource = { | |
430 | .start = PXA_CS0_PHYS, | |
431 | .end = PXA_CS0_PHYS + SZ_1M - 1, | |
432 | .flags = IORESOURCE_MEM, | |
433 | }; | |
434 | ||
435 | static struct platform_device em_x270_physmap_flash = { | |
436 | .name = "physmap-flash", | |
437 | .id = 0, | |
438 | .num_resources = 1, | |
439 | .resource = &em_x270_nor_flash_resource, | |
440 | .dev = { | |
441 | .platform_data = &em_x270_nor_data, | |
442 | }, | |
443 | }; | |
444 | ||
445 | static void __init em_x270_init_nor(void) | |
446 | { | |
447 | platform_device_register(&em_x270_physmap_flash); | |
448 | } | |
449 | #else | |
450 | static inline void em_x270_init_nor(void) {} | |
451 | #endif | |
452 | ||
3d50527b | 453 | /* PXA27x OHCI controller setup */ |
3c85bce6 | 454 | #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
3d50527b MR |
455 | static int em_x270_ohci_init(struct device *dev) |
456 | { | |
3d50527b MR |
457 | /* enable port 2 transiever */ |
458 | UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; | |
459 | ||
460 | return 0; | |
461 | } | |
462 | ||
463 | static struct pxaohci_platform_data em_x270_ohci_platform_data = { | |
464 | .port_mode = PMM_PERPORT_MODE, | |
097b5334 | 465 | .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, |
3d50527b MR |
466 | .init = em_x270_ohci_init, |
467 | }; | |
468 | ||
3c85bce6 MR |
469 | static void __init em_x270_init_ohci(void) |
470 | { | |
471 | pxa_set_ohci_info(&em_x270_ohci_platform_data); | |
472 | } | |
473 | #else | |
474 | static inline void em_x270_init_ohci(void) {} | |
475 | #endif | |
3d50527b | 476 | |
3c85bce6 MR |
477 | /* MCI controller setup */ |
478 | #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) | |
6432f46c MR |
479 | static struct regulator *em_x270_sdio_ldo; |
480 | ||
3d50527b MR |
481 | static int em_x270_mci_init(struct device *dev, |
482 | irq_handler_t em_x270_detect_int, | |
483 | void *data) | |
484 | { | |
6432f46c MR |
485 | int err; |
486 | ||
487 | em_x270_sdio_ldo = regulator_get(dev, "vcc sdio"); | |
488 | if (IS_ERR(em_x270_sdio_ldo)) { | |
489 | dev_err(dev, "can't request SDIO power supply: %ld\n", | |
490 | PTR_ERR(em_x270_sdio_ldo)); | |
491 | return PTR_ERR(em_x270_sdio_ldo); | |
492 | } | |
493 | ||
4a697e83 | 494 | err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int, |
6432f46c MR |
495 | IRQF_DISABLED | IRQF_TRIGGER_RISING | |
496 | IRQF_TRIGGER_FALLING, | |
3c85bce6 | 497 | "MMC card detect", data); |
3d50527b | 498 | if (err) { |
6432f46c MR |
499 | dev_err(dev, "can't request MMC card detect IRQ: %d\n", err); |
500 | goto err_irq; | |
501 | } | |
502 | ||
503 | err = gpio_request(GPIO95_MMC_WP, "MMC WP"); | |
504 | if (err) { | |
505 | dev_err(dev, "can't request MMC write protect: %d\n", err); | |
506 | goto err_gpio_wp; | |
3d50527b MR |
507 | } |
508 | ||
6432f46c MR |
509 | gpio_direction_input(GPIO95_MMC_WP); |
510 | ||
3d50527b | 511 | return 0; |
6432f46c MR |
512 | |
513 | err_gpio_wp: | |
4a697e83 | 514 | free_irq(gpio_to_irq(mmc_cd), data); |
6432f46c MR |
515 | err_irq: |
516 | regulator_put(em_x270_sdio_ldo); | |
517 | ||
518 | return err; | |
3d50527b MR |
519 | } |
520 | ||
521 | static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) | |
522 | { | |
6432f46c MR |
523 | struct pxamci_platform_data* p_d = dev->platform_data; |
524 | ||
525 | if ((1 << vdd) & p_d->ocr_mask) { | |
526 | int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; | |
527 | ||
528 | regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); | |
529 | regulator_enable(em_x270_sdio_ldo); | |
530 | } else { | |
531 | regulator_disable(em_x270_sdio_ldo); | |
532 | } | |
3d50527b MR |
533 | } |
534 | ||
535 | static void em_x270_mci_exit(struct device *dev, void *data) | |
536 | { | |
4a697e83 | 537 | free_irq(gpio_to_irq(mmc_cd), data); |
6432f46c MR |
538 | } |
539 | ||
540 | static int em_x270_mci_get_ro(struct device *dev) | |
541 | { | |
542 | return gpio_get_value(GPIO95_MMC_WP); | |
3d50527b MR |
543 | } |
544 | ||
545 | static struct pxamci_platform_data em_x270_mci_platform_data = { | |
6432f46c MR |
546 | .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| |
547 | MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| | |
548 | MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| | |
549 | MMC_VDD_30_31|MMC_VDD_31_32, | |
3d50527b MR |
550 | .init = em_x270_mci_init, |
551 | .setpower = em_x270_mci_setpower, | |
6432f46c | 552 | .get_ro = em_x270_mci_get_ro, |
3d50527b MR |
553 | .exit = em_x270_mci_exit, |
554 | }; | |
555 | ||
3c85bce6 MR |
556 | static void __init em_x270_init_mmc(void) |
557 | { | |
6432f46c | 558 | em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); |
3c85bce6 MR |
559 | pxa_set_mci_info(&em_x270_mci_platform_data); |
560 | } | |
561 | #else | |
562 | static inline void em_x270_init_mmc(void) {} | |
563 | #endif | |
564 | ||
28c88046 | 565 | /* LCD */ |
3c85bce6 | 566 | #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) |
28c88046 MR |
567 | static struct pxafb_mode_info em_x270_lcd_modes[] = { |
568 | [0] = { | |
569 | .pixclock = 38250, | |
570 | .bpp = 16, | |
571 | .xres = 480, | |
572 | .yres = 640, | |
573 | .hsync_len = 8, | |
574 | .vsync_len = 2, | |
575 | .left_margin = 8, | |
576 | .upper_margin = 2, | |
577 | .right_margin = 24, | |
578 | .lower_margin = 4, | |
579 | .sync = 0, | |
580 | }, | |
581 | [1] = { | |
582 | .pixclock = 153800, | |
583 | .bpp = 16, | |
584 | .xres = 240, | |
585 | .yres = 320, | |
586 | .hsync_len = 8, | |
587 | .vsync_len = 2, | |
588 | .left_margin = 8, | |
589 | .upper_margin = 2, | |
590 | .right_margin = 88, | |
591 | .lower_margin = 2, | |
592 | .sync = 0, | |
593 | }, | |
3d50527b MR |
594 | }; |
595 | ||
596 | static struct pxafb_mach_info em_x270_lcd = { | |
28c88046 MR |
597 | .modes = em_x270_lcd_modes, |
598 | .num_modes = 2, | |
3c85bce6 | 599 | .lcd_conn = LCD_COLOR_TFT_16BPP, |
3d50527b | 600 | }; |
28c88046 | 601 | |
3c85bce6 | 602 | static void __init em_x270_init_lcd(void) |
3d50527b | 603 | { |
3d50527b | 604 | set_pxa_fb_info(&em_x270_lcd); |
3c85bce6 MR |
605 | } |
606 | #else | |
607 | static inline void em_x270_init_lcd(void) {} | |
608 | #endif | |
3d50527b | 609 | |
28c88046 MR |
610 | #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) |
611 | static struct pxa2xx_spi_master em_x270_spi_info = { | |
612 | .num_chipselect = 1, | |
613 | }; | |
614 | ||
615 | static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { | |
616 | .rx_threshold = 1, | |
617 | .tx_threshold = 1, | |
618 | }; | |
619 | ||
620 | static struct tdo24m_platform_data em_x270_tdo24m_pdata = { | |
621 | .model = TDO35S, | |
622 | }; | |
623 | ||
624 | static struct spi_board_info em_x270_spi_devices[] __initdata = { | |
625 | { | |
626 | .modalias = "tdo24m", | |
627 | .max_speed_hz = 1000000, | |
628 | .bus_num = 1, | |
629 | .chip_select = 0, | |
630 | .controller_data = &em_x270_tdo24m_chip, | |
631 | .platform_data = &em_x270_tdo24m_pdata, | |
632 | }, | |
633 | }; | |
634 | ||
635 | static void __init em_x270_init_spi(void) | |
636 | { | |
637 | pxa2xx_set_spi_info(1, &em_x270_spi_info); | |
638 | spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); | |
639 | } | |
640 | #else | |
641 | static inline void em_x270_init_spi(void) {} | |
642 | #endif | |
643 | ||
3c85bce6 MR |
644 | #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) |
645 | static void __init em_x270_init_ac97(void) | |
646 | { | |
9f19d638 | 647 | pxa_set_ac97_info(NULL); |
3c85bce6 MR |
648 | } |
649 | #else | |
650 | static inline void em_x270_init_ac97(void) {} | |
651 | #endif | |
652 | ||
653 | #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) | |
654 | static unsigned int em_x270_matrix_keys[] = { | |
655 | KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), | |
656 | KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), | |
657 | KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), | |
658 | }; | |
3d50527b | 659 | |
3c85bce6 MR |
660 | struct pxa27x_keypad_platform_data em_x270_keypad_info = { |
661 | /* code map for the matrix keys */ | |
662 | .matrix_key_rows = 3, | |
663 | .matrix_key_cols = 3, | |
664 | .matrix_key_map = em_x270_matrix_keys, | |
665 | .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys), | |
666 | }; | |
667 | ||
668 | static void __init em_x270_init_keypad(void) | |
669 | { | |
670 | pxa_set_keypad_info(&em_x270_keypad_info); | |
671 | } | |
672 | #else | |
673 | static inline void em_x270_init_keypad(void) {} | |
674 | #endif | |
3d50527b | 675 | |
3c85bce6 MR |
676 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
677 | static struct gpio_keys_button gpio_keys_button[] = { | |
678 | [0] = { | |
679 | .desc = "sleep/wakeup", | |
680 | .code = KEY_SUSPEND, | |
681 | .type = EV_PWR, | |
682 | .gpio = 1, | |
683 | .wakeup = 1, | |
684 | }, | |
685 | }; | |
3d50527b | 686 | |
3c85bce6 MR |
687 | static struct gpio_keys_platform_data em_x270_gpio_keys_data = { |
688 | .buttons = gpio_keys_button, | |
689 | .nbuttons = 1, | |
690 | }; | |
3d50527b | 691 | |
3c85bce6 MR |
692 | static struct platform_device em_x270_gpio_keys = { |
693 | .name = "gpio-keys", | |
694 | .id = -1, | |
695 | .dev = { | |
696 | .platform_data = &em_x270_gpio_keys_data, | |
697 | }, | |
698 | }; | |
699 | ||
700 | static void __init em_x270_init_gpio_keys(void) | |
701 | { | |
702 | platform_device_register(&em_x270_gpio_keys); | |
703 | } | |
704 | #else | |
705 | static inline void em_x270_init_gpio_keys(void) {} | |
706 | #endif | |
707 | ||
28c88046 MR |
708 | /* Quick Capture Interface and sensor setup */ |
709 | #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) | |
710 | static struct regulator *em_x270_camera_ldo; | |
711 | ||
712 | static int em_x270_sensor_init(struct device *dev) | |
713 | { | |
714 | int ret; | |
715 | ||
716 | ret = gpio_request(GPIO93_CAM_RESET, "camera reset"); | |
717 | if (ret) | |
718 | return ret; | |
719 | ||
720 | gpio_direction_output(GPIO93_CAM_RESET, 0); | |
721 | ||
722 | em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); | |
723 | if (em_x270_camera_ldo == NULL) { | |
724 | gpio_free(GPIO93_CAM_RESET); | |
725 | return -ENODEV; | |
726 | } | |
727 | ||
728 | ret = regulator_enable(em_x270_camera_ldo); | |
729 | if (ret) { | |
730 | regulator_put(em_x270_camera_ldo); | |
731 | gpio_free(GPIO93_CAM_RESET); | |
732 | return ret; | |
733 | } | |
734 | ||
735 | gpio_set_value(GPIO93_CAM_RESET, 1); | |
736 | ||
737 | return 0; | |
738 | } | |
739 | ||
740 | struct pxacamera_platform_data em_x270_camera_platform_data = { | |
741 | .init = em_x270_sensor_init, | |
742 | .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | | |
743 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, | |
744 | .mclk_10khz = 2600, | |
745 | }; | |
746 | ||
747 | static int em_x270_sensor_power(struct device *dev, int on) | |
748 | { | |
749 | int ret; | |
750 | int is_on = regulator_is_enabled(em_x270_camera_ldo); | |
751 | ||
752 | if (on == is_on) | |
753 | return 0; | |
754 | ||
755 | gpio_set_value(GPIO93_CAM_RESET, !on); | |
756 | ||
757 | if (on) | |
758 | ret = regulator_enable(em_x270_camera_ldo); | |
759 | else | |
760 | ret = regulator_disable(em_x270_camera_ldo); | |
761 | ||
762 | if (ret) | |
763 | return ret; | |
764 | ||
765 | gpio_set_value(GPIO93_CAM_RESET, on); | |
766 | ||
767 | return 0; | |
768 | } | |
769 | ||
770 | static struct soc_camera_link iclink = { | |
771 | .bus_id = 0, | |
772 | .power = em_x270_sensor_power, | |
773 | }; | |
774 | ||
775 | static struct i2c_board_info em_x270_i2c_cam_info[] = { | |
776 | { | |
777 | I2C_BOARD_INFO("mt9m111", 0x48), | |
778 | .platform_data = &iclink, | |
779 | }, | |
780 | }; | |
781 | ||
782 | static struct i2c_pxa_platform_data em_x270_i2c_info = { | |
783 | .fast_mode = 1, | |
784 | }; | |
785 | ||
786 | static void __init em_x270_init_camera(void) | |
787 | { | |
788 | pxa_set_i2c_info(&em_x270_i2c_info); | |
789 | i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); | |
790 | pxa_set_camera_info(&em_x270_camera_platform_data); | |
791 | } | |
792 | #else | |
793 | static inline void em_x270_init_camera(void) {} | |
794 | #endif | |
795 | ||
796 | /* DA9030 related initializations */ | |
432adf18 MR |
797 | #define REGULATOR_CONSUMER(_name, _dev, _supply) \ |
798 | static struct regulator_consumer_supply _name##_consumers[] = { \ | |
799 | { \ | |
800 | .dev = _dev, \ | |
801 | .supply = _supply, \ | |
802 | }, \ | |
803 | } | |
28c88046 | 804 | |
432adf18 MR |
805 | REGULATOR_CONSUMER(ldo3, NULL, "vcc gps"); |
806 | REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); | |
807 | REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); | |
808 | REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); | |
809 | REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs"); | |
810 | ||
811 | #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ | |
812 | static struct regulator_init_data _ldo##_data = { \ | |
813 | .constraints = { \ | |
814 | .min_uV = _min_uV, \ | |
815 | .max_uV = _max_uV, \ | |
816 | .state_mem = { \ | |
817 | .enabled = 0, \ | |
818 | }, \ | |
819 | .valid_ops_mask = _ops_mask, \ | |
820 | }, \ | |
821 | .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ | |
822 | .consumer_supplies = _ldo##_consumers, \ | |
823 | }; | |
824 | ||
825 | REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS); | |
826 | REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS); | |
827 | REGULATOR_INIT(ldo10, 2000000, 3200000, | |
828 | REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); | |
829 | REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); | |
830 | REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); | |
28c88046 MR |
831 | |
832 | struct led_info em_x270_led_info = { | |
833 | .name = "em-x270:orange", | |
834 | .default_trigger = "battery-charging-or-full", | |
835 | }; | |
836 | ||
9f055c49 MR |
837 | struct power_supply_info em_x270_psy_info = { |
838 | .name = "LP555597P6H-FPS", | |
839 | .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, | |
840 | .voltage_max_design = 4200000, | |
841 | .voltage_min_design = 3000000, | |
842 | .use_for_apm = 1, | |
843 | }; | |
844 | ||
845 | static void em_x270_battery_low(void) | |
846 | { | |
847 | apm_queue_event(APM_LOW_BATTERY); | |
848 | } | |
849 | ||
850 | static void em_x270_battery_critical(void) | |
851 | { | |
852 | apm_queue_event(APM_CRITICAL_SUSPEND); | |
853 | } | |
854 | ||
855 | struct da9030_battery_info em_x270_batterty_info = { | |
856 | .battery_info = &em_x270_psy_info, | |
857 | ||
858 | .charge_milliamp = 1000, | |
859 | .charge_millivolt = 4200, | |
860 | ||
861 | .vbat_low = 3600, | |
862 | .vbat_crit = 3400, | |
863 | .vbat_charge_start = 4100, | |
864 | .vbat_charge_stop = 4200, | |
865 | .vbat_charge_restart = 4000, | |
866 | ||
867 | .vcharge_min = 3200, | |
868 | .vcharge_max = 5500, | |
869 | ||
870 | .tbat_low = 197, | |
871 | .tbat_high = 78, | |
872 | .tbat_restart = 100, | |
873 | ||
874 | .batmon_interval = 0, | |
875 | ||
876 | .battery_low = em_x270_battery_low, | |
877 | .battery_critical = em_x270_battery_critical, | |
878 | }; | |
879 | ||
432adf18 MR |
880 | #define DA9030_SUBDEV(_name, _id, _pdata) \ |
881 | { \ | |
882 | .name = "da903x-" #_name, \ | |
883 | .id = DA9030_ID_##_id, \ | |
884 | .platform_data = _pdata, \ | |
28c88046 | 885 | } |
432adf18 MR |
886 | |
887 | #define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data) | |
888 | ||
889 | struct da903x_subdev_info em_x270_da9030_subdevs[] = { | |
890 | DA9030_LDO(3), | |
891 | DA9030_LDO(5), | |
892 | DA9030_LDO(10), | |
893 | DA9030_LDO(12), | |
894 | DA9030_LDO(19), | |
895 | ||
896 | DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), | |
897 | DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), | |
9f055c49 | 898 | DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), |
28c88046 MR |
899 | }; |
900 | ||
901 | static struct da903x_platform_data em_x270_da9030_info = { | |
902 | .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs), | |
903 | .subdevs = em_x270_da9030_subdevs, | |
904 | }; | |
905 | ||
906 | static struct i2c_board_info em_x270_i2c_pmic_info = { | |
907 | I2C_BOARD_INFO("da9030", 0x49), | |
908 | .irq = IRQ_GPIO(0), | |
909 | .platform_data = &em_x270_da9030_info, | |
910 | }; | |
911 | ||
912 | static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = { | |
913 | .use_pio = 1, | |
914 | }; | |
915 | ||
916 | static void __init em_x270_init_da9030(void) | |
917 | { | |
918 | pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info); | |
919 | i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); | |
920 | } | |
921 | ||
4a697e83 | 922 | static void __init em_x270_module_init(void) |
3c85bce6 MR |
923 | { |
924 | pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); | |
925 | ||
4a697e83 MR |
926 | mmc_cd = GPIO13_MMC_CD; |
927 | nand_rb = GPIO56_NAND_RB; | |
928 | dm9000_flags = DM9000_PLATF_32BITONLY; | |
929 | } | |
930 | ||
931 | static void __init em_x270_init(void) | |
932 | { | |
933 | pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); | |
934 | ||
935 | em_x270_module_init(); | |
936 | ||
28c88046 | 937 | em_x270_init_da9030(); |
3c85bce6 MR |
938 | em_x270_init_dm9000(); |
939 | em_x270_init_rtc(); | |
940 | em_x270_init_nand(); | |
28c88046 | 941 | em_x270_init_nor(); |
3c85bce6 MR |
942 | em_x270_init_lcd(); |
943 | em_x270_init_mmc(); | |
944 | em_x270_init_ohci(); | |
945 | em_x270_init_keypad(); | |
946 | em_x270_init_gpio_keys(); | |
947 | em_x270_init_ac97(); | |
28c88046 MR |
948 | em_x270_init_camera(); |
949 | em_x270_init_spi(); | |
3d50527b MR |
950 | } |
951 | ||
3c85bce6 | 952 | MACHINE_START(EM_X270, "Compulab EM-X270") |
3d50527b MR |
953 | .boot_params = 0xa0000100, |
954 | .phys_io = 0x40000000, | |
955 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
956 | .map_io = pxa_map_io, | |
957 | .init_irq = pxa27x_init_irq, | |
958 | .timer = &pxa_timer, | |
959 | .init_machine = em_x270_init, | |
960 | MACHINE_END |