[ARM] pxamci: add simple gpio controls
[deliverable/linux.git] / arch / arm / mach-pxa / em-x270.c
CommitLineData
3d50527b 1/*
3c85bce6 2 * Support for CompuLab EM-X270 platform
3d50527b 3 *
3c85bce6 4 * Copyright (C) 2007, 2008 CompuLab, Ltd.
3d50527b
MR
5 * Author: Mike Rapoport <mike@compulab.co.il>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/irq.h>
13#include <linux/platform_device.h>
7f14a787 14#include <linux/delay.h>
3d50527b
MR
15
16#include <linux/dm9000.h>
17#include <linux/rtc-v3020.h>
3d50527b
MR
18#include <linux/mtd/nand.h>
19#include <linux/mtd/partitions.h>
28c88046 20#include <linux/mtd/physmap.h>
3c85bce6
MR
21#include <linux/input.h>
22#include <linux/gpio_keys.h>
23#include <linux/gpio.h>
28c88046
MR
24#include <linux/mfd/da903x.h>
25#include <linux/regulator/machine.h>
26#include <linux/spi/spi.h>
27#include <linux/spi/tdo24m.h>
c9be0e39 28#include <linux/spi/libertas_spi.h>
9f055c49
MR
29#include <linux/power_supply.h>
30#include <linux/apm-emulation.h>
76e3fc36
MR
31#include <linux/i2c.h>
32#include <linux/i2c/pca953x.h>
a37ed431 33#include <linux/regulator/userspace-consumer.h>
28c88046
MR
34
35#include <media/soc_camera.h>
3d50527b
MR
36
37#include <asm/mach-types.h>
3d50527b
MR
38#include <asm/mach/arch.h>
39
51c62982 40#include <mach/pxa27x.h>
a09e64fb
RK
41#include <mach/pxa27x-udc.h>
42#include <mach/audio.h>
43#include <mach/pxafb.h>
44#include <mach/ohci.h>
45#include <mach/mmc.h>
46#include <mach/pxa27x_keypad.h>
f0a83701 47#include <plat/i2c.h>
28c88046
MR
48#include <mach/camera.h>
49#include <mach/pxa2xx_spi.h>
3d50527b
MR
50
51#include "generic.h"
6432f46c 52#include "devices.h"
3d50527b 53
7f14a787 54/* EM-X270 specific GPIOs */
3c85bce6 55#define GPIO13_MMC_CD (13)
7f14a787
MR
56#define GPIO95_MMC_WP (95)
57#define GPIO56_NAND_RB (56)
76e3fc36 58#define GPIO93_CAM_RESET (93)
128d88b8 59#define GPIO16_USB_HUB_RESET (16)
3c85bce6 60
7f14a787
MR
61/* eXeda specific GPIOs */
62#define GPIO114_MMC_CD (114)
63#define GPIO20_NAND_RB (20)
64#define GPIO38_SD_PWEN (38)
76e3fc36
MR
65#define GPIO37_WLAN_RST (37)
66#define GPIO95_TOUCHPAD_INT (95)
67#define GPIO130_CAM_RESET (130)
128d88b8 68#define GPIO10_USB_HUB_RESET (10)
3c85bce6 69
7f14a787
MR
70/* common GPIOs */
71#define GPIO11_NAND_CS (11)
7f14a787
MR
72#define GPIO41_ETHIRQ (41)
73#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
c9be0e39
MR
74#define GPIO115_WLAN_PWEN (115)
75#define GPIO19_WLAN_STRAP (19)
128d88b8 76#define GPIO9_USB_VBUS_EN (9)
28c88046 77
4a697e83
MR
78static int mmc_cd;
79static int nand_rb;
80static int dm9000_flags;
76e3fc36 81static int cam_reset;
128d88b8 82static int usb_hub_reset;
4a697e83
MR
83
84static unsigned long common_pin_config[] = {
3c85bce6
MR
85 /* AC'97 */
86 GPIO28_AC97_BITCLK,
87 GPIO29_AC97_SDATA_IN_0,
88 GPIO30_AC97_SDATA_OUT,
89 GPIO31_AC97_SYNC,
90 GPIO98_AC97_SYSCLK,
91 GPIO113_AC97_nRESET,
92
93 /* BTUART */
94 GPIO42_BTUART_RXD,
95 GPIO43_BTUART_TXD,
96 GPIO44_BTUART_CTS,
97 GPIO45_BTUART_RTS,
98
99 /* STUART */
100 GPIO46_STUART_RXD,
101 GPIO47_STUART_TXD,
102
103 /* MCI controller */
104 GPIO32_MMC_CLK,
105 GPIO112_MMC_CMD,
106 GPIO92_MMC_DAT_0,
107 GPIO109_MMC_DAT_1,
108 GPIO110_MMC_DAT_2,
109 GPIO111_MMC_DAT_3,
110
111 /* LCD */
112 GPIO58_LCD_LDD_0,
113 GPIO59_LCD_LDD_1,
114 GPIO60_LCD_LDD_2,
115 GPIO61_LCD_LDD_3,
116 GPIO62_LCD_LDD_4,
117 GPIO63_LCD_LDD_5,
118 GPIO64_LCD_LDD_6,
119 GPIO65_LCD_LDD_7,
120 GPIO66_LCD_LDD_8,
121 GPIO67_LCD_LDD_9,
122 GPIO68_LCD_LDD_10,
123 GPIO69_LCD_LDD_11,
124 GPIO70_LCD_LDD_12,
125 GPIO71_LCD_LDD_13,
126 GPIO72_LCD_LDD_14,
127 GPIO73_LCD_LDD_15,
128 GPIO74_LCD_FCLK,
129 GPIO75_LCD_LCLK,
130 GPIO76_LCD_PCLK,
131 GPIO77_LCD_BIAS,
132
133 /* QCI */
134 GPIO84_CIF_FV,
135 GPIO25_CIF_LV,
136 GPIO53_CIF_MCLK,
137 GPIO54_CIF_PCLK,
138 GPIO81_CIF_DD_0,
139 GPIO55_CIF_DD_1,
140 GPIO51_CIF_DD_2,
141 GPIO50_CIF_DD_3,
142 GPIO52_CIF_DD_4,
143 GPIO48_CIF_DD_5,
144 GPIO17_CIF_DD_6,
145 GPIO12_CIF_DD_7,
146
147 /* I2C */
148 GPIO117_I2C_SCL,
149 GPIO118_I2C_SDA,
150
151 /* Keypad */
152 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
153 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
154 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
155 GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
156 GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
157 GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
158 GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
159 GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
160 GPIO103_KP_MKOUT_0,
161 GPIO104_KP_MKOUT_1,
162 GPIO105_KP_MKOUT_2,
163 GPIO106_KP_MKOUT_3,
164 GPIO107_KP_MKOUT_4,
165 GPIO108_KP_MKOUT_5,
166 GPIO96_KP_MKOUT_6,
167 GPIO22_KP_MKOUT_7,
168
169 /* SSP1 */
170 GPIO26_SSP1_RXD,
171 GPIO23_SSP1_SCLK,
172 GPIO24_SSP1_SFRM,
173 GPIO57_SSP1_TXD,
174
175 /* SSP2 */
c9be0e39
MR
176 GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
177 GPIO14_GPIO,
3c85bce6
MR
178 GPIO89_SSP2_TXD,
179 GPIO88_SSP2_RXD,
180
181 /* SDRAM and local bus */
182 GPIO15_nCS_1,
183 GPIO78_nCS_2,
184 GPIO79_nCS_3,
185 GPIO80_nCS_4,
186 GPIO49_nPWE,
187 GPIO18_RDY,
188
189 /* GPIO */
6432f46c 190 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
3c85bce6
MR
191
192 /* power controls */
193 GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
194 GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
195
196 /* NAND controls */
197 GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
3c85bce6
MR
198
199 /* interrupts */
3c85bce6
MR
200 GPIO41_GPIO, /* DM9000 interrupt */
201};
3d50527b 202
4a697e83 203static unsigned long em_x270_pin_config[] = {
76e3fc36 204 GPIO13_GPIO, /* MMC card detect */
128d88b8 205 GPIO16_GPIO, /* USB hub reset */
76e3fc36
MR
206 GPIO56_GPIO, /* NAND Ready/Busy */
207 GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
208 GPIO95_GPIO, /* MMC Write protect */
4a697e83
MR
209};
210
7f14a787 211static unsigned long exeda_pin_config[] = {
128d88b8 212 GPIO10_GPIO, /* USB hub reset */
7f14a787
MR
213 GPIO20_GPIO, /* NAND Ready/Busy */
214 GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
76e3fc36 215 GPIO95_GPIO, /* touchpad IRQ */
7f14a787
MR
216 GPIO114_GPIO, /* MMC card detect */
217};
218
3c85bce6
MR
219#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
220static struct resource em_x270_dm9000_resource[] = {
3d50527b
MR
221 [0] = {
222 .start = PXA_CS2_PHYS,
223 .end = PXA_CS2_PHYS + 3,
224 .flags = IORESOURCE_MEM,
225 },
226 [1] = {
227 .start = PXA_CS2_PHYS + 8,
228 .end = PXA_CS2_PHYS + 8 + 0x3f,
229 .flags = IORESOURCE_MEM,
230 },
231 [2] = {
232 .start = EM_X270_ETHIRQ,
233 .end = EM_X270_ETHIRQ,
3c85bce6 234 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
3d50527b
MR
235 }
236};
237
3c85bce6 238static struct dm9000_plat_data em_x270_dm9000_platdata = {
4a697e83 239 .flags = DM9000_PLATF_NO_EEPROM,
3d50527b
MR
240};
241
3c85bce6 242static struct platform_device em_x270_dm9000 = {
3d50527b
MR
243 .name = "dm9000",
244 .id = 0,
3c85bce6
MR
245 .num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
246 .resource = em_x270_dm9000_resource,
3d50527b 247 .dev = {
3c85bce6 248 .platform_data = &em_x270_dm9000_platdata,
3d50527b
MR
249 }
250};
251
3c85bce6
MR
252static void __init em_x270_init_dm9000(void)
253{
4a697e83 254 em_x270_dm9000_platdata.flags |= dm9000_flags;
3c85bce6
MR
255 platform_device_register(&em_x270_dm9000);
256}
257#else
258static inline void em_x270_init_dm9000(void) {}
259#endif
3d50527b 260
3c85bce6
MR
261/* V3020 RTC */
262#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
3d50527b
MR
263static struct resource em_x270_v3020_resource[] = {
264 [0] = {
265 .start = PXA_CS4_PHYS,
266 .end = PXA_CS4_PHYS + 3,
267 .flags = IORESOURCE_MEM,
268 },
269};
270
271static struct v3020_platform_data em_x270_v3020_platdata = {
272 .leftshift = 0,
273};
274
275static struct platform_device em_x270_rtc = {
276 .name = "v3020",
277 .num_resources = ARRAY_SIZE(em_x270_v3020_resource),
278 .resource = em_x270_v3020_resource,
279 .id = -1,
280 .dev = {
281 .platform_data = &em_x270_v3020_platdata,
282 }
283};
284
3c85bce6
MR
285static void __init em_x270_init_rtc(void)
286{
287 platform_device_register(&em_x270_rtc);
288}
289#else
290static inline void em_x270_init_rtc(void) {}
291#endif
3d50527b 292
3c85bce6
MR
293/* NAND flash */
294#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
3d50527b
MR
295static inline void nand_cs_on(void)
296{
3c85bce6 297 gpio_set_value(GPIO11_NAND_CS, 0);
3d50527b
MR
298}
299
300static void nand_cs_off(void)
301{
302 dsb();
303
3c85bce6 304 gpio_set_value(GPIO11_NAND_CS, 1);
3d50527b
MR
305}
306
307/* hardware specific access to control-lines */
308static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
309 unsigned int ctrl)
310{
311 struct nand_chip *this = mtd->priv;
312 unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
313
314 dsb();
315
316 if (ctrl & NAND_CTRL_CHANGE) {
317 if (ctrl & NAND_ALE)
318 nandaddr |= (1 << 3);
319 else
320 nandaddr &= ~(1 << 3);
321 if (ctrl & NAND_CLE)
322 nandaddr |= (1 << 2);
323 else
324 nandaddr &= ~(1 << 2);
325 if (ctrl & NAND_NCE)
326 nand_cs_on();
327 else
328 nand_cs_off();
329 }
330
331 dsb();
332 this->IO_ADDR_W = (void __iomem *)nandaddr;
333 if (dat != NAND_CMD_NONE)
334 writel(dat, this->IO_ADDR_W);
335
336 dsb();
337}
338
339/* read device ready pin */
340static int em_x270_nand_device_ready(struct mtd_info *mtd)
341{
342 dsb();
343
4a697e83 344 return gpio_get_value(nand_rb);
3d50527b
MR
345}
346
347static struct mtd_partition em_x270_partition_info[] = {
348 [0] = {
349 .name = "em_x270-0",
350 .offset = 0,
351 .size = SZ_4M,
352 },
353 [1] = {
354 .name = "em_x270-1",
355 .offset = MTDPART_OFS_APPEND,
356 .size = MTDPART_SIZ_FULL
357 },
358};
359
360static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
361
362struct platform_nand_data em_x270_nand_platdata = {
363 .chip = {
364 .nr_chips = 1,
365 .chip_offset = 0,
366 .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
367 .partitions = em_x270_partition_info,
368 .chip_delay = 20,
369 .part_probe_types = em_x270_part_probes,
370 },
371 .ctrl = {
372 .hwcontrol = 0,
373 .dev_ready = em_x270_nand_device_ready,
374 .select_chip = 0,
375 .cmd_ctrl = em_x270_nand_cmd_ctl,
376 },
377};
378
379static struct resource em_x270_nand_resource[] = {
380 [0] = {
381 .start = PXA_CS1_PHYS,
382 .end = PXA_CS1_PHYS + 12,
383 .flags = IORESOURCE_MEM,
384 },
385};
386
387static struct platform_device em_x270_nand = {
388 .name = "gen_nand",
389 .num_resources = ARRAY_SIZE(em_x270_nand_resource),
390 .resource = em_x270_nand_resource,
391 .id = -1,
392 .dev = {
393 .platform_data = &em_x270_nand_platdata,
394 }
395};
396
3c85bce6
MR
397static void __init em_x270_init_nand(void)
398{
399 int err;
3d50527b 400
3c85bce6
MR
401 err = gpio_request(GPIO11_NAND_CS, "NAND CS");
402 if (err) {
403 pr_warning("EM-X270: failed to request NAND CS gpio\n");
404 return;
405 }
406
407 gpio_direction_output(GPIO11_NAND_CS, 1);
408
4a697e83 409 err = gpio_request(nand_rb, "NAND R/B");
3c85bce6
MR
410 if (err) {
411 pr_warning("EM-X270: failed to request NAND R/B gpio\n");
412 gpio_free(GPIO11_NAND_CS);
413 return;
414 }
415
4a697e83 416 gpio_direction_input(nand_rb);
3c85bce6
MR
417
418 platform_device_register(&em_x270_nand);
419}
420#else
421static inline void em_x270_init_nand(void) {}
422#endif
3d50527b 423
28c88046
MR
424#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
425static struct mtd_partition em_x270_nor_parts[] = {
426 {
427 .name = "Bootloader",
428 .offset = 0x00000000,
429 .size = 0x00050000,
430 .mask_flags = MTD_WRITEABLE /* force read-only */
431 }, {
432 .name = "Environment",
433 .offset = 0x00050000,
434 .size = 0x00010000,
435 }, {
436 .name = "Reserved",
437 .offset = 0x00060000,
438 .size = 0x00050000,
439 .mask_flags = MTD_WRITEABLE /* force read-only */
440 }, {
441 .name = "Splashscreen",
442 .offset = 0x000b0000,
443 .size = 0x00050000,
444 }
445};
446
447static struct physmap_flash_data em_x270_nor_data[] = {
448 [0] = {
449 .width = 2,
450 .parts = em_x270_nor_parts,
451 .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
452 },
453};
454
455static struct resource em_x270_nor_flash_resource = {
456 .start = PXA_CS0_PHYS,
457 .end = PXA_CS0_PHYS + SZ_1M - 1,
458 .flags = IORESOURCE_MEM,
459};
460
461static struct platform_device em_x270_physmap_flash = {
462 .name = "physmap-flash",
463 .id = 0,
464 .num_resources = 1,
465 .resource = &em_x270_nor_flash_resource,
466 .dev = {
467 .platform_data = &em_x270_nor_data,
468 },
469};
470
471static void __init em_x270_init_nor(void)
472{
473 platform_device_register(&em_x270_physmap_flash);
474}
475#else
476static inline void em_x270_init_nor(void) {}
477#endif
478
3d50527b 479/* PXA27x OHCI controller setup */
3c85bce6 480#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
128d88b8
MR
481static struct regulator *em_x270_usb_ldo;
482
483static int em_x270_usb_hub_init(void)
484{
485 int err;
486
487 em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
488 if (IS_ERR(em_x270_usb_ldo))
489 return PTR_ERR(em_x270_usb_ldo);
490
491 err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
492 if (err)
493 goto err_free_usb_ldo;
494
495 err = gpio_request(usb_hub_reset, "hub rst");
496 if (err)
497 goto err_free_vbus_gpio;
498
499 /* USB Hub power-on and reset */
500 gpio_direction_output(usb_hub_reset, 0);
501 regulator_enable(em_x270_usb_ldo);
502 gpio_set_value(usb_hub_reset, 1);
503 gpio_set_value(usb_hub_reset, 0);
504 regulator_disable(em_x270_usb_ldo);
505 regulator_enable(em_x270_usb_ldo);
506 gpio_set_value(usb_hub_reset, 1);
507
508 /* enable VBUS */
509 gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
510
511 return 0;
512
513err_free_vbus_gpio:
514 gpio_free(GPIO9_USB_VBUS_EN);
515err_free_usb_ldo:
516 regulator_put(em_x270_usb_ldo);
517
518 return err;
519}
520
3d50527b
MR
521static int em_x270_ohci_init(struct device *dev)
522{
128d88b8
MR
523 int err;
524
525 /* we don't want to entirely disable USB if the HUB init failed */
526 err = em_x270_usb_hub_init();
527 if (err)
528 pr_err("USB Hub initialization failed: %d\n", err);
529
3d50527b
MR
530 /* enable port 2 transiever */
531 UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
532
533 return 0;
534}
535
128d88b8
MR
536static void em_x270_ohci_exit(struct device *dev)
537{
538 gpio_free(usb_hub_reset);
539 gpio_free(GPIO9_USB_VBUS_EN);
540
541 if (!IS_ERR(em_x270_usb_ldo)) {
542 if (regulator_is_enabled(em_x270_usb_ldo))
543 regulator_disable(em_x270_usb_ldo);
544
545 regulator_put(em_x270_usb_ldo);
546 }
547}
548
3d50527b
MR
549static struct pxaohci_platform_data em_x270_ohci_platform_data = {
550 .port_mode = PMM_PERPORT_MODE,
097b5334 551 .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
3d50527b 552 .init = em_x270_ohci_init,
128d88b8 553 .exit = em_x270_ohci_exit,
3d50527b
MR
554};
555
3c85bce6
MR
556static void __init em_x270_init_ohci(void)
557{
558 pxa_set_ohci_info(&em_x270_ohci_platform_data);
559}
560#else
561static inline void em_x270_init_ohci(void) {}
562#endif
3d50527b 563
3c85bce6
MR
564/* MCI controller setup */
565#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
6432f46c
MR
566static struct regulator *em_x270_sdio_ldo;
567
3d50527b
MR
568static int em_x270_mci_init(struct device *dev,
569 irq_handler_t em_x270_detect_int,
570 void *data)
571{
6432f46c
MR
572 int err;
573
574 em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
575 if (IS_ERR(em_x270_sdio_ldo)) {
576 dev_err(dev, "can't request SDIO power supply: %ld\n",
577 PTR_ERR(em_x270_sdio_ldo));
578 return PTR_ERR(em_x270_sdio_ldo);
579 }
580
4a697e83 581 err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
6432f46c
MR
582 IRQF_DISABLED | IRQF_TRIGGER_RISING |
583 IRQF_TRIGGER_FALLING,
3c85bce6 584 "MMC card detect", data);
3d50527b 585 if (err) {
6432f46c
MR
586 dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
587 goto err_irq;
588 }
589
7f14a787
MR
590 if (machine_is_em_x270()) {
591 err = gpio_request(GPIO95_MMC_WP, "MMC WP");
592 if (err) {
593 dev_err(dev, "can't request MMC write protect: %d\n",
594 err);
595 goto err_gpio_wp;
596 }
597 gpio_direction_input(GPIO95_MMC_WP);
598 } else {
599 err = gpio_request(GPIO38_SD_PWEN, "sdio power");
600 if (err) {
601 dev_err(dev, "can't request MMC power control : %d\n",
602 err);
603 goto err_gpio_wp;
604 }
605 gpio_direction_output(GPIO38_SD_PWEN, 1);
3d50527b
MR
606 }
607
608 return 0;
6432f46c
MR
609
610err_gpio_wp:
4a697e83 611 free_irq(gpio_to_irq(mmc_cd), data);
6432f46c
MR
612err_irq:
613 regulator_put(em_x270_sdio_ldo);
614
615 return err;
3d50527b
MR
616}
617
618static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
619{
6432f46c
MR
620 struct pxamci_platform_data* p_d = dev->platform_data;
621
622 if ((1 << vdd) & p_d->ocr_mask) {
623 int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
624
625 regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
626 regulator_enable(em_x270_sdio_ldo);
627 } else {
628 regulator_disable(em_x270_sdio_ldo);
629 }
3d50527b
MR
630}
631
632static void em_x270_mci_exit(struct device *dev, void *data)
633{
4a697e83 634 free_irq(gpio_to_irq(mmc_cd), data);
7f14a787
MR
635 regulator_put(em_x270_sdio_ldo);
636
637 if (machine_is_em_x270())
638 gpio_free(GPIO95_MMC_WP);
639 else
640 gpio_free(GPIO38_SD_PWEN);
6432f46c
MR
641}
642
643static int em_x270_mci_get_ro(struct device *dev)
644{
645 return gpio_get_value(GPIO95_MMC_WP);
3d50527b
MR
646}
647
648static struct pxamci_platform_data em_x270_mci_platform_data = {
6432f46c
MR
649 .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
650 MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
651 MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
652 MMC_VDD_30_31|MMC_VDD_31_32,
3d50527b
MR
653 .init = em_x270_mci_init,
654 .setpower = em_x270_mci_setpower,
655 .exit = em_x270_mci_exit,
656};
657
3c85bce6
MR
658static void __init em_x270_init_mmc(void)
659{
7f14a787
MR
660 if (machine_is_em_x270())
661 em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
662
6432f46c 663 em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250);
3c85bce6
MR
664 pxa_set_mci_info(&em_x270_mci_platform_data);
665}
666#else
667static inline void em_x270_init_mmc(void) {}
668#endif
669
28c88046 670/* LCD */
3c85bce6 671#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
28c88046
MR
672static struct pxafb_mode_info em_x270_lcd_modes[] = {
673 [0] = {
674 .pixclock = 38250,
675 .bpp = 16,
676 .xres = 480,
677 .yres = 640,
678 .hsync_len = 8,
679 .vsync_len = 2,
680 .left_margin = 8,
681 .upper_margin = 2,
682 .right_margin = 24,
683 .lower_margin = 4,
684 .sync = 0,
685 },
686 [1] = {
687 .pixclock = 153800,
688 .bpp = 16,
689 .xres = 240,
690 .yres = 320,
691 .hsync_len = 8,
692 .vsync_len = 2,
693 .left_margin = 8,
694 .upper_margin = 2,
695 .right_margin = 88,
696 .lower_margin = 2,
697 .sync = 0,
698 },
3d50527b
MR
699};
700
701static struct pxafb_mach_info em_x270_lcd = {
28c88046
MR
702 .modes = em_x270_lcd_modes,
703 .num_modes = 2,
3c85bce6 704 .lcd_conn = LCD_COLOR_TFT_16BPP,
3d50527b 705};
28c88046 706
3c85bce6 707static void __init em_x270_init_lcd(void)
3d50527b 708{
3d50527b 709 set_pxa_fb_info(&em_x270_lcd);
3c85bce6
MR
710}
711#else
712static inline void em_x270_init_lcd(void) {}
713#endif
3d50527b 714
28c88046
MR
715#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
716static struct pxa2xx_spi_master em_x270_spi_info = {
717 .num_chipselect = 1,
718};
719
720static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
bd9d0740
MR
721 .rx_threshold = 1,
722 .tx_threshold = 1,
723 .gpio_cs = -1,
28c88046
MR
724};
725
726static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
727 .model = TDO35S,
728};
729
c9be0e39
MR
730static struct pxa2xx_spi_master em_x270_spi_2_info = {
731 .num_chipselect = 1,
732 .enable_dma = 1,
733};
734
735static struct pxa2xx_spi_chip em_x270_libertas_chip = {
736 .rx_threshold = 1,
737 .tx_threshold = 1,
738 .timeout = 1000,
3cb05c97 739 .gpio_cs = 14,
c9be0e39
MR
740};
741
742static unsigned long em_x270_libertas_pin_config[] = {
743 /* SSP2 */
744 GPIO19_SSP2_SCLK,
745 GPIO14_GPIO,
746 GPIO89_SSP2_TXD,
747 GPIO88_SSP2_RXD,
748};
749
750static int em_x270_libertas_setup(struct spi_device *spi)
751{
752 int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
753 if (err)
754 return err;
755
2f15cb59
MR
756 err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
757 if (err)
758 goto err_free_pwen;
759
760 if (machine_is_exeda()) {
761 err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
762 if (err)
763 goto err_free_strap;
764
765 gpio_direction_output(GPIO37_WLAN_RST, 1);
766 msleep(100);
767 }
768
c9be0e39 769 gpio_direction_output(GPIO19_WLAN_STRAP, 1);
2f15cb59 770 msleep(100);
c9be0e39
MR
771
772 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
773
774 gpio_direction_output(GPIO115_WLAN_PWEN, 0);
2f15cb59 775 msleep(100);
c9be0e39 776 gpio_set_value(GPIO115_WLAN_PWEN, 1);
2f15cb59 777 msleep(100);
c9be0e39
MR
778
779 spi->bits_per_word = 16;
780 spi_setup(spi);
781
782 return 0;
2f15cb59
MR
783
784err_free_strap:
785 gpio_free(GPIO19_WLAN_STRAP);
786err_free_pwen:
787 gpio_free(GPIO115_WLAN_PWEN);
788
789 return err;
c9be0e39
MR
790}
791
792static int em_x270_libertas_teardown(struct spi_device *spi)
793{
794 gpio_set_value(GPIO115_WLAN_PWEN, 0);
795 gpio_free(GPIO115_WLAN_PWEN);
2f15cb59
MR
796 gpio_free(GPIO19_WLAN_STRAP);
797
798 if (machine_is_exeda()) {
799 gpio_set_value(GPIO37_WLAN_RST, 0);
800 gpio_free(GPIO37_WLAN_RST);
801 }
c9be0e39
MR
802
803 return 0;
804}
805
806struct libertas_spi_platform_data em_x270_libertas_pdata = {
807 .use_dummy_writes = 1,
c9be0e39
MR
808 .setup = em_x270_libertas_setup,
809 .teardown = em_x270_libertas_teardown,
810};
811
28c88046
MR
812static struct spi_board_info em_x270_spi_devices[] __initdata = {
813 {
c9be0e39
MR
814 .modalias = "tdo24m",
815 .max_speed_hz = 1000000,
816 .bus_num = 1,
817 .chip_select = 0,
818 .controller_data = &em_x270_tdo24m_chip,
819 .platform_data = &em_x270_tdo24m_pdata,
820 },
821 {
822 .modalias = "libertas_spi",
823 .max_speed_hz = 13000000,
824 .bus_num = 2,
825 .irq = IRQ_GPIO(116),
826 .chip_select = 0,
827 .controller_data = &em_x270_libertas_chip,
828 .platform_data = &em_x270_libertas_pdata,
28c88046
MR
829 },
830};
831
832static void __init em_x270_init_spi(void)
833{
834 pxa2xx_set_spi_info(1, &em_x270_spi_info);
c9be0e39 835 pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
28c88046
MR
836 spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
837}
838#else
839static inline void em_x270_init_spi(void) {}
840#endif
841
303f2d7d 842#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
c63a5751
MR
843static pxa2xx_audio_ops_t em_x270_ac97_info = {
844 .reset_gpio = 113,
845};
846
3c85bce6
MR
847static void __init em_x270_init_ac97(void)
848{
c63a5751 849 pxa_set_ac97_info(&em_x270_ac97_info);
3c85bce6
MR
850}
851#else
852static inline void em_x270_init_ac97(void) {}
853#endif
854
855#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
7f14a787 856static unsigned int em_x270_module_matrix_keys[] = {
3c85bce6
MR
857 KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
858 KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
859 KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
860};
3d50527b 861
7f14a787 862struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
3c85bce6
MR
863 /* code map for the matrix keys */
864 .matrix_key_rows = 3,
865 .matrix_key_cols = 3,
7f14a787
MR
866 .matrix_key_map = em_x270_module_matrix_keys,
867 .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys),
868};
869
870static unsigned int em_x270_exeda_matrix_keys[] = {
871 KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
872 KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
873 KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
874 KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
875
876 KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
877 KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
878 KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
879 KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
880
881 KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
882 KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
883 KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
884 KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
885
886 KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
887 KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
888 KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
889 KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
890
891 KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
892 KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
893 KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
894 KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
895
896 KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
897 KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
898 KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
899 KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
900
901 KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
902 KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
903 KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
904 KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
905
906 KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
907 KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
908 KEY(7, 4, 0), KEY(7, 5, 0),
909 KEY(7, 6, 0), KEY(7, 7, 0),
910};
911
912struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
913 /* code map for the matrix keys */
914 .matrix_key_rows = 8,
915 .matrix_key_cols = 8,
916 .matrix_key_map = em_x270_exeda_matrix_keys,
917 .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
3c85bce6
MR
918};
919
920static void __init em_x270_init_keypad(void)
921{
7f14a787
MR
922 if (machine_is_em_x270())
923 pxa_set_keypad_info(&em_x270_module_keypad_info);
924 else
925 pxa_set_keypad_info(&em_x270_exeda_keypad_info);
3c85bce6
MR
926}
927#else
928static inline void em_x270_init_keypad(void) {}
929#endif
3d50527b 930
3c85bce6
MR
931#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
932static struct gpio_keys_button gpio_keys_button[] = {
933 [0] = {
934 .desc = "sleep/wakeup",
935 .code = KEY_SUSPEND,
936 .type = EV_PWR,
937 .gpio = 1,
938 .wakeup = 1,
939 },
940};
3d50527b 941
3c85bce6
MR
942static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
943 .buttons = gpio_keys_button,
944 .nbuttons = 1,
945};
3d50527b 946
3c85bce6
MR
947static struct platform_device em_x270_gpio_keys = {
948 .name = "gpio-keys",
949 .id = -1,
950 .dev = {
951 .platform_data = &em_x270_gpio_keys_data,
952 },
953};
954
955static void __init em_x270_init_gpio_keys(void)
956{
957 platform_device_register(&em_x270_gpio_keys);
958}
959#else
960static inline void em_x270_init_gpio_keys(void) {}
961#endif
962
28c88046
MR
963/* Quick Capture Interface and sensor setup */
964#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
965static struct regulator *em_x270_camera_ldo;
966
967static int em_x270_sensor_init(struct device *dev)
968{
969 int ret;
970
76e3fc36 971 ret = gpio_request(cam_reset, "camera reset");
28c88046
MR
972 if (ret)
973 return ret;
974
76e3fc36 975 gpio_direction_output(cam_reset, 0);
28c88046
MR
976
977 em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
978 if (em_x270_camera_ldo == NULL) {
76e3fc36 979 gpio_free(cam_reset);
28c88046
MR
980 return -ENODEV;
981 }
982
983 ret = regulator_enable(em_x270_camera_ldo);
984 if (ret) {
985 regulator_put(em_x270_camera_ldo);
76e3fc36 986 gpio_free(cam_reset);
28c88046
MR
987 return ret;
988 }
989
76e3fc36 990 gpio_set_value(cam_reset, 1);
28c88046
MR
991
992 return 0;
993}
994
995struct pxacamera_platform_data em_x270_camera_platform_data = {
996 .init = em_x270_sensor_init,
997 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
998 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
999 .mclk_10khz = 2600,
1000};
1001
1002static int em_x270_sensor_power(struct device *dev, int on)
1003{
1004 int ret;
1005 int is_on = regulator_is_enabled(em_x270_camera_ldo);
1006
1007 if (on == is_on)
1008 return 0;
1009
76e3fc36 1010 gpio_set_value(cam_reset, !on);
28c88046
MR
1011
1012 if (on)
1013 ret = regulator_enable(em_x270_camera_ldo);
1014 else
1015 ret = regulator_disable(em_x270_camera_ldo);
1016
1017 if (ret)
1018 return ret;
1019
76e3fc36 1020 gpio_set_value(cam_reset, on);
28c88046
MR
1021
1022 return 0;
1023}
1024
1025static struct soc_camera_link iclink = {
1026 .bus_id = 0,
1027 .power = em_x270_sensor_power,
1028};
1029
1030static struct i2c_board_info em_x270_i2c_cam_info[] = {
1031 {
1032 I2C_BOARD_INFO("mt9m111", 0x48),
1033 .platform_data = &iclink,
1034 },
1035};
1036
28c88046
MR
1037static void __init em_x270_init_camera(void)
1038{
28c88046
MR
1039 i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
1040 pxa_set_camera_info(&em_x270_camera_platform_data);
1041}
1042#else
1043static inline void em_x270_init_camera(void) {}
1044#endif
1045
a37ed431
MR
1046static struct regulator_bulk_data em_x270_gps_consumer_supply = {
1047 .supply = "vcc gps",
1048};
1049
1050static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
1051 .name = "vcc gps",
1052 .num_supplies = 1,
1053 .supplies = &em_x270_gps_consumer_supply,
1054};
1055
1056static struct platform_device em_x270_gps_userspace_consumer = {
1057 .name = "reg-userspace-consumer",
1058 .id = 0,
1059 .dev = {
1060 .platform_data = &em_x270_gps_consumer_data,
1061 },
1062};
1063
1064static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
1065 .supply = "vcc gprs",
1066};
1067
1068static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
1069 .name = "vcc gprs",
1070 .num_supplies = 1,
1071 .supplies = &em_x270_gprs_consumer_supply
1072};
1073
1074static struct platform_device em_x270_gprs_userspace_consumer = {
1075 .name = "reg-userspace-consumer",
1076 .id = 1,
1077 .dev = {
1078 .platform_data = &em_x270_gprs_consumer_data,
1079 }
1080};
1081
1082static struct platform_device *em_x270_userspace_consumers[] = {
1083 &em_x270_gps_userspace_consumer,
1084 &em_x270_gprs_userspace_consumer,
1085};
1086
1087static void __init em_x270_userspace_consumers_init(void)
1088{
1089 platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
1090}
1091
28c88046 1092/* DA9030 related initializations */
432adf18
MR
1093#define REGULATOR_CONSUMER(_name, _dev, _supply) \
1094 static struct regulator_consumer_supply _name##_consumers[] = { \
1095 { \
1096 .dev = _dev, \
1097 .supply = _supply, \
1098 }, \
1099 }
28c88046 1100
a37ed431 1101REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps");
432adf18
MR
1102REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
1103REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
1104REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
a37ed431 1105REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
432adf18
MR
1106
1107#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
1108 static struct regulator_init_data _ldo##_data = { \
1109 .constraints = { \
1110 .min_uV = _min_uV, \
1111 .max_uV = _max_uV, \
1112 .state_mem = { \
1113 .enabled = 0, \
1114 }, \
1115 .valid_ops_mask = _ops_mask, \
a37ed431 1116 .apply_uV = 1, \
432adf18
MR
1117 }, \
1118 .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
1119 .consumer_supplies = _ldo##_consumers, \
1120 };
1121
1122REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1123REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1124REGULATOR_INIT(ldo10, 2000000, 3200000,
1125 REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
1126REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1127REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
28c88046
MR
1128
1129struct led_info em_x270_led_info = {
1130 .name = "em-x270:orange",
1131 .default_trigger = "battery-charging-or-full",
1132};
1133
9f055c49 1134struct power_supply_info em_x270_psy_info = {
3690a0f4 1135 .name = "battery",
9f055c49
MR
1136 .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
1137 .voltage_max_design = 4200000,
1138 .voltage_min_design = 3000000,
1139 .use_for_apm = 1,
1140};
1141
1142static void em_x270_battery_low(void)
1143{
1d3e216f 1144#if defined(CONFIG_APM_EMULATION)
9f055c49 1145 apm_queue_event(APM_LOW_BATTERY);
1d3e216f 1146#endif
9f055c49
MR
1147}
1148
1149static void em_x270_battery_critical(void)
1150{
1d3e216f 1151#if defined(CONFIG_APM_EMULATION)
9f055c49 1152 apm_queue_event(APM_CRITICAL_SUSPEND);
1d3e216f 1153#endif
9f055c49
MR
1154}
1155
1156struct da9030_battery_info em_x270_batterty_info = {
1157 .battery_info = &em_x270_psy_info,
1158
1159 .charge_milliamp = 1000,
1160 .charge_millivolt = 4200,
1161
1162 .vbat_low = 3600,
1163 .vbat_crit = 3400,
1164 .vbat_charge_start = 4100,
1165 .vbat_charge_stop = 4200,
1166 .vbat_charge_restart = 4000,
1167
1168 .vcharge_min = 3200,
1169 .vcharge_max = 5500,
1170
1171 .tbat_low = 197,
1172 .tbat_high = 78,
1173 .tbat_restart = 100,
1174
1175 .batmon_interval = 0,
1176
1177 .battery_low = em_x270_battery_low,
1178 .battery_critical = em_x270_battery_critical,
1179};
1180
432adf18
MR
1181#define DA9030_SUBDEV(_name, _id, _pdata) \
1182 { \
1183 .name = "da903x-" #_name, \
1184 .id = DA9030_ID_##_id, \
1185 .platform_data = _pdata, \
28c88046 1186 }
432adf18
MR
1187
1188#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
1189
1190struct da903x_subdev_info em_x270_da9030_subdevs[] = {
1191 DA9030_LDO(3),
1192 DA9030_LDO(5),
1193 DA9030_LDO(10),
1194 DA9030_LDO(12),
1195 DA9030_LDO(19),
1196
1197 DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
1198 DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
9f055c49 1199 DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
28c88046
MR
1200};
1201
1202static struct da903x_platform_data em_x270_da9030_info = {
1203 .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
1204 .subdevs = em_x270_da9030_subdevs,
1205};
1206
1207static struct i2c_board_info em_x270_i2c_pmic_info = {
1208 I2C_BOARD_INFO("da9030", 0x49),
1209 .irq = IRQ_GPIO(0),
1210 .platform_data = &em_x270_da9030_info,
1211};
1212
1213static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
1214 .use_pio = 1,
1215};
1216
1217static void __init em_x270_init_da9030(void)
1218{
1219 pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
1220 i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
1221}
1222
76e3fc36
MR
1223static struct pca953x_platform_data exeda_gpio_ext_pdata = {
1224 .gpio_base = 128,
1225};
1226
1227static struct i2c_board_info exeda_i2c_info[] = {
1228 {
1229 I2C_BOARD_INFO("pca9555", 0x21),
1230 .platform_data = &exeda_gpio_ext_pdata,
1231 },
1232};
1233
1234static struct i2c_pxa_platform_data em_x270_i2c_info = {
1235 .fast_mode = 1,
1236};
1237
1238static void __init em_x270_init_i2c(void)
1239{
1240 pxa_set_i2c_info(&em_x270_i2c_info);
1241
1242 if (machine_is_exeda())
1243 i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
1244}
1245
4a697e83 1246static void __init em_x270_module_init(void)
3c85bce6 1247{
7f14a787 1248 pr_info("%s\n", __func__);
3c85bce6
MR
1249 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
1250
4a697e83
MR
1251 mmc_cd = GPIO13_MMC_CD;
1252 nand_rb = GPIO56_NAND_RB;
1253 dm9000_flags = DM9000_PLATF_32BITONLY;
76e3fc36 1254 cam_reset = GPIO93_CAM_RESET;
128d88b8 1255 usb_hub_reset = GPIO16_USB_HUB_RESET;
4a697e83
MR
1256}
1257
7f14a787
MR
1258static void __init em_x270_exeda_init(void)
1259{
1260 pr_info("%s\n", __func__);
1261 pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
1262
1263 mmc_cd = GPIO114_MMC_CD;
1264 nand_rb = GPIO20_NAND_RB;
1265 dm9000_flags = DM9000_PLATF_16BITONLY;
76e3fc36 1266 cam_reset = GPIO130_CAM_RESET;
128d88b8 1267 usb_hub_reset = GPIO10_USB_HUB_RESET;
7f14a787
MR
1268}
1269
4a697e83
MR
1270static void __init em_x270_init(void)
1271{
1272 pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
1273
9599d1db
MR
1274#ifdef CONFIG_PM
1275 pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
1276#endif
1277
7f14a787
MR
1278 if (machine_is_em_x270())
1279 em_x270_module_init();
1280 else if (machine_is_exeda())
1281 em_x270_exeda_init();
1282 else
1283 panic("Unsupported machine: %d\n", machine_arch_type);
4a697e83 1284
28c88046 1285 em_x270_init_da9030();
3c85bce6
MR
1286 em_x270_init_dm9000();
1287 em_x270_init_rtc();
1288 em_x270_init_nand();
28c88046 1289 em_x270_init_nor();
3c85bce6
MR
1290 em_x270_init_lcd();
1291 em_x270_init_mmc();
1292 em_x270_init_ohci();
1293 em_x270_init_keypad();
1294 em_x270_init_gpio_keys();
1295 em_x270_init_ac97();
28c88046 1296 em_x270_init_spi();
76e3fc36
MR
1297 em_x270_init_i2c();
1298 em_x270_init_camera();
a37ed431 1299 em_x270_userspace_consumers_init();
3d50527b
MR
1300}
1301
3c85bce6 1302MACHINE_START(EM_X270, "Compulab EM-X270")
3d50527b
MR
1303 .boot_params = 0xa0000100,
1304 .phys_io = 0x40000000,
1305 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
1306 .map_io = pxa_map_io,
1307 .init_irq = pxa27x_init_irq,
1308 .timer = &pxa_timer,
1309 .init_machine = em_x270_init,
1310MACHINE_END
7f14a787
MR
1311
1312MACHINE_START(EXEDA, "Compulab eXeda")
1313 .boot_params = 0xa0000100,
1314 .phys_io = 0x40000000,
1315 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
1316 .map_io = pxa_map_io,
1317 .init_irq = pxa27x_init_irq,
1318 .timer = &pxa_timer,
1319 .init_machine = em_x270_init,
1320MACHINE_END
This page took 0.218682 seconds and 5 git commands to generate.