Commit | Line | Data |
---|---|---|
3abcd199 IM |
1 | /* |
2 | * Hardware definitions for the Toshiba eseries PDAs | |
3 | * | |
4 | * Copyright (c) 2003 Ian Molton <spyro@f2s.com> | |
5 | * | |
6 | * This file is licensed under | |
7 | * the terms of the GNU General Public License version 2. This program | |
8 | * is licensed "as is" without any warranty of any kind, whether express | |
9 | * or implied. | |
10 | * | |
11 | */ | |
12 | ||
28365488 | 13 | #include <linux/kernel.h> |
3abcd199 | 14 | #include <linux/init.h> |
8e3afafe | 15 | #include <linux/clk-provider.h> |
36033422 | 16 | #include <linux/gpio.h> |
b1ae1b7b | 17 | #include <linux/delay.h> |
36033422 | 18 | #include <linux/platform_device.h> |
e478fe4c EM |
19 | #include <linux/mfd/tc6387xb.h> |
20 | #include <linux/mfd/tc6393xb.h> | |
21 | #include <linux/mfd/t7l66xb.h> | |
22 | #include <linux/mtd/nand.h> | |
23 | #include <linux/mtd/partitions.h> | |
133dce06 | 24 | #include <linux/usb/gpio_vbus.h> |
1c2f87c2 | 25 | #include <linux/memblock.h> |
e478fe4c EM |
26 | |
27 | #include <video/w100fb.h> | |
3abcd199 IM |
28 | |
29 | #include <asm/setup.h> | |
30 | #include <asm/mach/arch.h> | |
3abcd199 IM |
31 | #include <asm/mach-types.h> |
32 | ||
51c62982 | 33 | #include <mach/pxa25x.h> |
ebcce7b1 | 34 | #include <mach/eseries-gpio.h> |
6ac6b817 | 35 | #include <mach/eseries-irq.h> |
e478fe4c | 36 | #include <mach/audio.h> |
293b2da1 | 37 | #include <linux/platform_data/video-pxafb.h> |
ebcce7b1 | 38 | #include <mach/udc.h> |
293b2da1 | 39 | #include <linux/platform_data/irda-pxaficp.h> |
28365488 | 40 | |
e478fe4c | 41 | #include "devices.h" |
877e03d4 | 42 | #include "generic.h" |
3abcd199 IM |
43 | |
44 | /* Only e800 has 128MB RAM */ | |
1c2f87c2 | 45 | void __init eseries_fixup(struct tag *tags, char **cmdline) |
3abcd199 | 46 | { |
3abcd199 | 47 | if (machine_is_e800()) |
1c2f87c2 | 48 | memblock_add(0xa0000000, SZ_128M); |
3abcd199 | 49 | else |
1c2f87c2 | 50 | memblock_add(0xa0000000, SZ_64M); |
3abcd199 IM |
51 | } |
52 | ||
133dce06 | 53 | struct gpio_vbus_mach_info e7xx_udc_info = { |
ebcce7b1 IM |
54 | .gpio_vbus = GPIO_E7XX_USB_DISC, |
55 | .gpio_pullup = GPIO_E7XX_USB_PULLUP, | |
56 | .gpio_pullup_inverted = 1 | |
57 | }; | |
58 | ||
133dce06 DES |
59 | static struct platform_device e7xx_gpio_vbus = { |
60 | .name = "gpio-vbus", | |
61 | .id = -1, | |
62 | .dev = { | |
63 | .platform_data = &e7xx_udc_info, | |
64 | }, | |
65 | }; | |
66 | ||
36033422 | 67 | struct pxaficp_platform_data e7xx_ficp_platform_data = { |
c4bd0172 MV |
68 | .gpio_pwdown = GPIO_E7XX_IR_OFF, |
69 | .transceiver_cap = IR_SIRMODE | IR_OFF, | |
36033422 IM |
70 | }; |
71 | ||
b1ae1b7b IM |
72 | int eseries_tmio_enable(struct platform_device *dev) |
73 | { | |
74 | /* Reset - bring SUSPEND high before PCLR */ | |
75 | gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); | |
76 | gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); | |
77 | msleep(1); | |
78 | gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1); | |
79 | msleep(1); | |
80 | gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1); | |
81 | msleep(1); | |
82 | return 0; | |
83 | } | |
84 | ||
85 | int eseries_tmio_disable(struct platform_device *dev) | |
86 | { | |
87 | gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); | |
88 | gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); | |
89 | return 0; | |
90 | } | |
91 | ||
92 | int eseries_tmio_suspend(struct platform_device *dev) | |
93 | { | |
94 | gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); | |
95 | return 0; | |
96 | } | |
97 | ||
98 | int eseries_tmio_resume(struct platform_device *dev) | |
99 | { | |
100 | gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1); | |
101 | msleep(1); | |
102 | return 0; | |
103 | } | |
104 | ||
105 | void eseries_get_tmio_gpios(void) | |
106 | { | |
107 | gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL); | |
108 | gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL); | |
109 | gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0); | |
110 | gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0); | |
111 | } | |
112 | ||
113 | /* TMIO controller uses the same resources on all e-series machines. */ | |
114 | struct resource eseries_tmio_resources[] = { | |
115 | [0] = { | |
116 | .start = PXA_CS4_PHYS, | |
117 | .end = PXA_CS4_PHYS + 0x1fffff, | |
118 | .flags = IORESOURCE_MEM, | |
119 | }, | |
120 | [1] = { | |
6384fdad HZ |
121 | .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), |
122 | .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), | |
b1ae1b7b IM |
123 | .flags = IORESOURCE_IRQ, |
124 | }, | |
125 | }; | |
126 | ||
127 | /* Some e-series hardware cannot control the 32K clock */ | |
955d2953 | 128 | static void __init eseries_register_clks(void) |
b1ae1b7b | 129 | { |
8e3afafe | 130 | clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768); |
b1ae1b7b IM |
131 | } |
132 | ||
e478fe4c EM |
133 | #ifdef CONFIG_MACH_E330 |
134 | /* -------------------- e330 tc6387xb parameters -------------------- */ | |
135 | ||
136 | static struct tc6387xb_platform_data e330_tc6387xb_info = { | |
137 | .enable = &eseries_tmio_enable, | |
138 | .disable = &eseries_tmio_disable, | |
139 | .suspend = &eseries_tmio_suspend, | |
140 | .resume = &eseries_tmio_resume, | |
141 | }; | |
142 | ||
143 | static struct platform_device e330_tc6387xb_device = { | |
144 | .name = "tc6387xb", | |
145 | .id = -1, | |
146 | .dev = { | |
147 | .platform_data = &e330_tc6387xb_info, | |
148 | }, | |
149 | .num_resources = 2, | |
150 | .resource = eseries_tmio_resources, | |
151 | }; | |
152 | ||
153 | /* --------------------------------------------------------------- */ | |
154 | ||
155 | static struct platform_device *e330_devices[] __initdata = { | |
156 | &e330_tc6387xb_device, | |
133dce06 | 157 | &e7xx_gpio_vbus, |
e478fe4c EM |
158 | }; |
159 | ||
160 | static void __init e330_init(void) | |
161 | { | |
162 | pxa_set_ffuart_info(NULL); | |
163 | pxa_set_btuart_info(NULL); | |
164 | pxa_set_stuart_info(NULL); | |
165 | eseries_register_clks(); | |
166 | eseries_get_tmio_gpios(); | |
167 | platform_add_devices(ARRAY_AND_SIZE(e330_devices)); | |
e478fe4c EM |
168 | } |
169 | ||
170 | MACHINE_START(E330, "Toshiba e330") | |
171 | /* Maintainer: Ian Molton (spyro@f2s.com) */ | |
7375aba6 | 172 | .atag_offset = 0x100, |
851982c1 | 173 | .map_io = pxa25x_map_io, |
6ac6b817 | 174 | .nr_irqs = ESERIES_NR_IRQS, |
e478fe4c | 175 | .init_irq = pxa25x_init_irq, |
8a97ae2f | 176 | .handle_irq = pxa25x_handle_irq, |
e478fe4c EM |
177 | .fixup = eseries_fixup, |
178 | .init_machine = e330_init, | |
6bb27d73 | 179 | .init_time = pxa_timer_init, |
271a74fc | 180 | .restart = pxa_restart, |
e478fe4c EM |
181 | MACHINE_END |
182 | #endif | |
183 | ||
184 | #ifdef CONFIG_MACH_E350 | |
185 | /* -------------------- e350 t7l66xb parameters -------------------- */ | |
186 | ||
187 | static struct t7l66xb_platform_data e350_t7l66xb_info = { | |
188 | .irq_base = IRQ_BOARD_START, | |
189 | .enable = &eseries_tmio_enable, | |
190 | .suspend = &eseries_tmio_suspend, | |
191 | .resume = &eseries_tmio_resume, | |
192 | }; | |
193 | ||
194 | static struct platform_device e350_t7l66xb_device = { | |
195 | .name = "t7l66xb", | |
196 | .id = -1, | |
197 | .dev = { | |
198 | .platform_data = &e350_t7l66xb_info, | |
199 | }, | |
200 | .num_resources = 2, | |
201 | .resource = eseries_tmio_resources, | |
202 | }; | |
203 | ||
204 | /* ---------------------------------------------------------- */ | |
205 | ||
206 | static struct platform_device *e350_devices[] __initdata = { | |
207 | &e350_t7l66xb_device, | |
133dce06 | 208 | &e7xx_gpio_vbus, |
e478fe4c EM |
209 | }; |
210 | ||
211 | static void __init e350_init(void) | |
212 | { | |
213 | pxa_set_ffuart_info(NULL); | |
214 | pxa_set_btuart_info(NULL); | |
215 | pxa_set_stuart_info(NULL); | |
216 | eseries_register_clks(); | |
217 | eseries_get_tmio_gpios(); | |
218 | platform_add_devices(ARRAY_AND_SIZE(e350_devices)); | |
e478fe4c EM |
219 | } |
220 | ||
221 | MACHINE_START(E350, "Toshiba e350") | |
222 | /* Maintainer: Ian Molton (spyro@f2s.com) */ | |
7375aba6 | 223 | .atag_offset = 0x100, |
851982c1 | 224 | .map_io = pxa25x_map_io, |
6ac6b817 | 225 | .nr_irqs = ESERIES_NR_IRQS, |
e478fe4c | 226 | .init_irq = pxa25x_init_irq, |
8a97ae2f | 227 | .handle_irq = pxa25x_handle_irq, |
e478fe4c EM |
228 | .fixup = eseries_fixup, |
229 | .init_machine = e350_init, | |
6bb27d73 | 230 | .init_time = pxa_timer_init, |
271a74fc | 231 | .restart = pxa_restart, |
e478fe4c EM |
232 | MACHINE_END |
233 | #endif | |
234 | ||
235 | #ifdef CONFIG_MACH_E400 | |
236 | /* ------------------------ E400 LCD definitions ------------------------ */ | |
237 | ||
238 | static struct pxafb_mode_info e400_pxafb_mode_info = { | |
239 | .pixclock = 140703, | |
240 | .xres = 240, | |
241 | .yres = 320, | |
242 | .bpp = 16, | |
243 | .hsync_len = 4, | |
244 | .left_margin = 28, | |
245 | .right_margin = 8, | |
246 | .vsync_len = 3, | |
247 | .upper_margin = 5, | |
248 | .lower_margin = 6, | |
249 | .sync = 0, | |
250 | }; | |
251 | ||
252 | static struct pxafb_mach_info e400_pxafb_mach_info = { | |
253 | .modes = &e400_pxafb_mode_info, | |
254 | .num_modes = 1, | |
255 | .lcd_conn = LCD_COLOR_TFT_16BPP, | |
256 | .lccr3 = 0, | |
257 | .pxafb_backlight_power = NULL, | |
258 | }; | |
259 | ||
260 | /* ------------------------ E400 MFP config ----------------------------- */ | |
261 | ||
262 | static unsigned long e400_pin_config[] __initdata = { | |
263 | /* Chip selects */ | |
264 | GPIO15_nCS_1, /* CS1 - Flash */ | |
265 | GPIO80_nCS_4, /* CS4 - TMIO */ | |
266 | ||
267 | /* Clocks */ | |
268 | GPIO12_32KHz, | |
269 | ||
270 | /* BTUART */ | |
271 | GPIO42_BTUART_RXD, | |
272 | GPIO43_BTUART_TXD, | |
273 | GPIO44_BTUART_CTS, | |
274 | ||
275 | /* TMIO controller */ | |
276 | GPIO19_GPIO, /* t7l66xb #PCLR */ | |
277 | GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ | |
278 | ||
279 | /* wakeup */ | |
280 | GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, | |
281 | }; | |
282 | ||
283 | /* ---------------------------------------------------------------------- */ | |
284 | ||
285 | static struct mtd_partition partition_a = { | |
286 | .name = "Internal NAND flash", | |
287 | .offset = 0, | |
288 | .size = MTDPART_SIZ_FULL, | |
289 | }; | |
290 | ||
291 | static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; | |
292 | ||
293 | static struct nand_bbt_descr e400_t7l66xb_nand_bbt = { | |
294 | .options = 0, | |
295 | .offs = 4, | |
296 | .len = 2, | |
297 | .pattern = scan_ff_pattern | |
298 | }; | |
299 | ||
300 | static struct tmio_nand_data e400_t7l66xb_nand_config = { | |
301 | .num_partitions = 1, | |
302 | .partition = &partition_a, | |
303 | .badblock_pattern = &e400_t7l66xb_nand_bbt, | |
304 | }; | |
305 | ||
306 | static struct t7l66xb_platform_data e400_t7l66xb_info = { | |
307 | .irq_base = IRQ_BOARD_START, | |
308 | .enable = &eseries_tmio_enable, | |
309 | .suspend = &eseries_tmio_suspend, | |
310 | .resume = &eseries_tmio_resume, | |
311 | ||
312 | .nand_data = &e400_t7l66xb_nand_config, | |
313 | }; | |
314 | ||
315 | static struct platform_device e400_t7l66xb_device = { | |
316 | .name = "t7l66xb", | |
317 | .id = -1, | |
318 | .dev = { | |
319 | .platform_data = &e400_t7l66xb_info, | |
320 | }, | |
321 | .num_resources = 2, | |
322 | .resource = eseries_tmio_resources, | |
323 | }; | |
324 | ||
325 | /* ---------------------------------------------------------- */ | |
326 | ||
327 | static struct platform_device *e400_devices[] __initdata = { | |
328 | &e400_t7l66xb_device, | |
133dce06 | 329 | &e7xx_gpio_vbus, |
e478fe4c EM |
330 | }; |
331 | ||
332 | static void __init e400_init(void) | |
333 | { | |
334 | pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); | |
335 | pxa_set_ffuart_info(NULL); | |
336 | pxa_set_btuart_info(NULL); | |
337 | pxa_set_stuart_info(NULL); | |
338 | /* Fixme - e400 may have a switched clock */ | |
339 | eseries_register_clks(); | |
340 | eseries_get_tmio_gpios(); | |
4321e1a1 | 341 | pxa_set_fb_info(NULL, &e400_pxafb_mach_info); |
e478fe4c | 342 | platform_add_devices(ARRAY_AND_SIZE(e400_devices)); |
e478fe4c EM |
343 | } |
344 | ||
345 | MACHINE_START(E400, "Toshiba e400") | |
346 | /* Maintainer: Ian Molton (spyro@f2s.com) */ | |
7375aba6 | 347 | .atag_offset = 0x100, |
851982c1 | 348 | .map_io = pxa25x_map_io, |
6ac6b817 | 349 | .nr_irqs = ESERIES_NR_IRQS, |
e478fe4c | 350 | .init_irq = pxa25x_init_irq, |
8a97ae2f | 351 | .handle_irq = pxa25x_handle_irq, |
e478fe4c EM |
352 | .fixup = eseries_fixup, |
353 | .init_machine = e400_init, | |
6bb27d73 | 354 | .init_time = pxa_timer_init, |
271a74fc | 355 | .restart = pxa_restart, |
e478fe4c EM |
356 | MACHINE_END |
357 | #endif | |
358 | ||
359 | #ifdef CONFIG_MACH_E740 | |
360 | /* ------------------------ e740 video support --------------------------- */ | |
361 | ||
362 | static struct w100_gen_regs e740_lcd_regs = { | |
363 | .lcd_format = 0x00008023, | |
364 | .lcdd_cntl1 = 0x0f000000, | |
365 | .lcdd_cntl2 = 0x0003ffff, | |
366 | .genlcd_cntl1 = 0x00ffff03, | |
367 | .genlcd_cntl2 = 0x003c0f03, | |
368 | .genlcd_cntl3 = 0x000143aa, | |
369 | }; | |
370 | ||
371 | static struct w100_mode e740_lcd_mode = { | |
372 | .xres = 240, | |
373 | .yres = 320, | |
374 | .left_margin = 20, | |
375 | .right_margin = 28, | |
376 | .upper_margin = 9, | |
377 | .lower_margin = 8, | |
378 | .crtc_ss = 0x80140013, | |
379 | .crtc_ls = 0x81150110, | |
380 | .crtc_gs = 0x80050005, | |
381 | .crtc_vpos_gs = 0x000a0009, | |
382 | .crtc_rev = 0x0040010a, | |
383 | .crtc_dclk = 0xa906000a, | |
384 | .crtc_gclk = 0x80050108, | |
385 | .crtc_goe = 0x80050108, | |
386 | .pll_freq = 57, | |
387 | .pixclk_divider = 4, | |
388 | .pixclk_divider_rotated = 4, | |
389 | .pixclk_src = CLK_SRC_XTAL, | |
390 | .sysclk_divider = 1, | |
391 | .sysclk_src = CLK_SRC_PLL, | |
392 | .crtc_ps1_active = 0x41060010, | |
393 | }; | |
394 | ||
395 | static struct w100_gpio_regs e740_w100_gpio_info = { | |
396 | .init_data1 = 0x21002103, | |
397 | .gpio_dir1 = 0xffffdeff, | |
398 | .gpio_oe1 = 0x03c00643, | |
399 | .init_data2 = 0x003f003f, | |
400 | .gpio_dir2 = 0xffffffff, | |
401 | .gpio_oe2 = 0x000000ff, | |
402 | }; | |
403 | ||
404 | static struct w100fb_mach_info e740_fb_info = { | |
405 | .modelist = &e740_lcd_mode, | |
406 | .num_modes = 1, | |
407 | .regs = &e740_lcd_regs, | |
408 | .gpio = &e740_w100_gpio_info, | |
409 | .xtal_freq = 14318000, | |
410 | .xtal_dbl = 1, | |
411 | }; | |
412 | ||
413 | static struct resource e740_fb_resources[] = { | |
414 | [0] = { | |
415 | .start = 0x0c000000, | |
416 | .end = 0x0cffffff, | |
417 | .flags = IORESOURCE_MEM, | |
418 | }, | |
419 | }; | |
420 | ||
421 | static struct platform_device e740_fb_device = { | |
422 | .name = "w100fb", | |
423 | .id = -1, | |
424 | .dev = { | |
425 | .platform_data = &e740_fb_info, | |
426 | }, | |
427 | .num_resources = ARRAY_SIZE(e740_fb_resources), | |
428 | .resource = e740_fb_resources, | |
429 | }; | |
430 | ||
431 | /* --------------------------- MFP Pin config -------------------------- */ | |
432 | ||
433 | static unsigned long e740_pin_config[] __initdata = { | |
434 | /* Chip selects */ | |
435 | GPIO15_nCS_1, /* CS1 - Flash */ | |
436 | GPIO79_nCS_3, /* CS3 - IMAGEON */ | |
437 | GPIO80_nCS_4, /* CS4 - TMIO */ | |
438 | ||
439 | /* Clocks */ | |
440 | GPIO12_32KHz, | |
441 | ||
442 | /* BTUART */ | |
443 | GPIO42_BTUART_RXD, | |
444 | GPIO43_BTUART_TXD, | |
445 | GPIO44_BTUART_CTS, | |
446 | ||
447 | /* TMIO controller */ | |
448 | GPIO19_GPIO, /* t7l66xb #PCLR */ | |
449 | GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ | |
450 | ||
451 | /* UDC */ | |
452 | GPIO13_GPIO, | |
453 | GPIO3_GPIO, | |
454 | ||
455 | /* IrDA */ | |
456 | GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, | |
457 | ||
458 | /* AC97 */ | |
459 | GPIO28_AC97_BITCLK, | |
460 | GPIO29_AC97_SDATA_IN_0, | |
461 | GPIO30_AC97_SDATA_OUT, | |
462 | GPIO31_AC97_SYNC, | |
463 | ||
464 | /* Audio power control */ | |
465 | GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ | |
466 | GPIO40_GPIO, /* Mic amp power */ | |
467 | GPIO41_GPIO, /* Headphone amp power */ | |
468 | ||
469 | /* PC Card */ | |
470 | GPIO8_GPIO, /* CD0 */ | |
471 | GPIO44_GPIO, /* CD1 */ | |
472 | GPIO11_GPIO, /* IRQ0 */ | |
473 | GPIO6_GPIO, /* IRQ1 */ | |
474 | GPIO27_GPIO, /* RST0 */ | |
475 | GPIO24_GPIO, /* RST1 */ | |
476 | GPIO20_GPIO, /* PWR0 */ | |
477 | GPIO23_GPIO, /* PWR1 */ | |
478 | GPIO48_nPOE, | |
479 | GPIO49_nPWE, | |
480 | GPIO50_nPIOR, | |
481 | GPIO51_nPIOW, | |
482 | GPIO52_nPCE_1, | |
483 | GPIO53_nPCE_2, | |
484 | GPIO54_nPSKTSEL, | |
485 | GPIO55_nPREG, | |
486 | GPIO56_nPWAIT, | |
487 | GPIO57_nIOIS16, | |
488 | ||
489 | /* wakeup */ | |
490 | GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, | |
491 | }; | |
492 | ||
493 | /* -------------------- e740 t7l66xb parameters -------------------- */ | |
494 | ||
495 | static struct t7l66xb_platform_data e740_t7l66xb_info = { | |
496 | .irq_base = IRQ_BOARD_START, | |
497 | .enable = &eseries_tmio_enable, | |
498 | .suspend = &eseries_tmio_suspend, | |
499 | .resume = &eseries_tmio_resume, | |
500 | }; | |
501 | ||
502 | static struct platform_device e740_t7l66xb_device = { | |
503 | .name = "t7l66xb", | |
504 | .id = -1, | |
505 | .dev = { | |
506 | .platform_data = &e740_t7l66xb_info, | |
507 | }, | |
508 | .num_resources = 2, | |
509 | .resource = eseries_tmio_resources, | |
510 | }; | |
511 | ||
62133829 AL |
512 | static struct platform_device e740_audio_device = { |
513 | .name = "e740-audio", | |
514 | .id = -1, | |
515 | }; | |
516 | ||
e478fe4c EM |
517 | /* ----------------------------------------------------------------------- */ |
518 | ||
519 | static struct platform_device *e740_devices[] __initdata = { | |
520 | &e740_fb_device, | |
521 | &e740_t7l66xb_device, | |
133dce06 | 522 | &e7xx_gpio_vbus, |
62133829 | 523 | &e740_audio_device, |
e478fe4c EM |
524 | }; |
525 | ||
526 | static void __init e740_init(void) | |
527 | { | |
528 | pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); | |
529 | pxa_set_ffuart_info(NULL); | |
530 | pxa_set_btuart_info(NULL); | |
531 | pxa_set_stuart_info(NULL); | |
532 | eseries_register_clks(); | |
533 | clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, | |
534 | "UDCCLK", &pxa25x_device_udc.dev), | |
535 | eseries_get_tmio_gpios(); | |
536 | platform_add_devices(ARRAY_AND_SIZE(e740_devices)); | |
e478fe4c EM |
537 | pxa_set_ac97_info(NULL); |
538 | pxa_set_ficp_info(&e7xx_ficp_platform_data); | |
539 | } | |
540 | ||
541 | MACHINE_START(E740, "Toshiba e740") | |
542 | /* Maintainer: Ian Molton (spyro@f2s.com) */ | |
7375aba6 | 543 | .atag_offset = 0x100, |
851982c1 | 544 | .map_io = pxa25x_map_io, |
6ac6b817 | 545 | .nr_irqs = ESERIES_NR_IRQS, |
e478fe4c | 546 | .init_irq = pxa25x_init_irq, |
8a97ae2f | 547 | .handle_irq = pxa25x_handle_irq, |
e478fe4c EM |
548 | .fixup = eseries_fixup, |
549 | .init_machine = e740_init, | |
6bb27d73 | 550 | .init_time = pxa_timer_init, |
271a74fc | 551 | .restart = pxa_restart, |
e478fe4c EM |
552 | MACHINE_END |
553 | #endif | |
554 | ||
555 | #ifdef CONFIG_MACH_E750 | |
556 | /* ---------------------- E750 LCD definitions -------------------- */ | |
557 | ||
558 | static struct w100_gen_regs e750_lcd_regs = { | |
559 | .lcd_format = 0x00008003, | |
560 | .lcdd_cntl1 = 0x00000000, | |
561 | .lcdd_cntl2 = 0x0003ffff, | |
562 | .genlcd_cntl1 = 0x00fff003, | |
563 | .genlcd_cntl2 = 0x003c0f03, | |
564 | .genlcd_cntl3 = 0x000143aa, | |
565 | }; | |
566 | ||
567 | static struct w100_mode e750_lcd_mode = { | |
568 | .xres = 240, | |
569 | .yres = 320, | |
570 | .left_margin = 21, | |
571 | .right_margin = 22, | |
572 | .upper_margin = 5, | |
573 | .lower_margin = 4, | |
574 | .crtc_ss = 0x80150014, | |
575 | .crtc_ls = 0x8014000d, | |
576 | .crtc_gs = 0xc1000005, | |
577 | .crtc_vpos_gs = 0x00020147, | |
578 | .crtc_rev = 0x0040010a, | |
579 | .crtc_dclk = 0xa1700030, | |
580 | .crtc_gclk = 0x80cc0015, | |
581 | .crtc_goe = 0x80cc0015, | |
582 | .crtc_ps1_active = 0x61060017, | |
583 | .pll_freq = 57, | |
584 | .pixclk_divider = 4, | |
585 | .pixclk_divider_rotated = 4, | |
586 | .pixclk_src = CLK_SRC_XTAL, | |
587 | .sysclk_divider = 1, | |
588 | .sysclk_src = CLK_SRC_PLL, | |
589 | }; | |
590 | ||
591 | static struct w100_gpio_regs e750_w100_gpio_info = { | |
592 | .init_data1 = 0x01192f1b, | |
593 | .gpio_dir1 = 0xd5ffdeff, | |
594 | .gpio_oe1 = 0x000020bf, | |
595 | .init_data2 = 0x010f010f, | |
596 | .gpio_dir2 = 0xffffffff, | |
597 | .gpio_oe2 = 0x000001cf, | |
598 | }; | |
599 | ||
600 | static struct w100fb_mach_info e750_fb_info = { | |
601 | .modelist = &e750_lcd_mode, | |
602 | .num_modes = 1, | |
603 | .regs = &e750_lcd_regs, | |
604 | .gpio = &e750_w100_gpio_info, | |
605 | .xtal_freq = 14318000, | |
606 | .xtal_dbl = 1, | |
607 | }; | |
608 | ||
609 | static struct resource e750_fb_resources[] = { | |
610 | [0] = { | |
611 | .start = 0x0c000000, | |
612 | .end = 0x0cffffff, | |
613 | .flags = IORESOURCE_MEM, | |
614 | }, | |
615 | }; | |
616 | ||
617 | static struct platform_device e750_fb_device = { | |
618 | .name = "w100fb", | |
619 | .id = -1, | |
620 | .dev = { | |
621 | .platform_data = &e750_fb_info, | |
622 | }, | |
623 | .num_resources = ARRAY_SIZE(e750_fb_resources), | |
624 | .resource = e750_fb_resources, | |
625 | }; | |
626 | ||
627 | /* -------------------- e750 MFP parameters -------------------- */ | |
628 | ||
629 | static unsigned long e750_pin_config[] __initdata = { | |
630 | /* Chip selects */ | |
631 | GPIO15_nCS_1, /* CS1 - Flash */ | |
632 | GPIO79_nCS_3, /* CS3 - IMAGEON */ | |
633 | GPIO80_nCS_4, /* CS4 - TMIO */ | |
634 | ||
635 | /* Clocks */ | |
636 | GPIO11_3_6MHz, | |
637 | ||
638 | /* BTUART */ | |
639 | GPIO42_BTUART_RXD, | |
640 | GPIO43_BTUART_TXD, | |
641 | GPIO44_BTUART_CTS, | |
642 | ||
643 | /* TMIO controller */ | |
644 | GPIO19_GPIO, /* t7l66xb #PCLR */ | |
645 | GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ | |
646 | ||
647 | /* UDC */ | |
648 | GPIO13_GPIO, | |
649 | GPIO3_GPIO, | |
650 | ||
651 | /* IrDA */ | |
652 | GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, | |
653 | ||
654 | /* AC97 */ | |
655 | GPIO28_AC97_BITCLK, | |
656 | GPIO29_AC97_SDATA_IN_0, | |
657 | GPIO30_AC97_SDATA_OUT, | |
658 | GPIO31_AC97_SYNC, | |
659 | ||
660 | /* Audio power control */ | |
661 | GPIO4_GPIO, /* Headphone amp power */ | |
662 | GPIO7_GPIO, /* Speaker amp power */ | |
663 | GPIO37_GPIO, /* Headphone detect */ | |
664 | ||
665 | /* PC Card */ | |
666 | GPIO8_GPIO, /* CD0 */ | |
667 | GPIO44_GPIO, /* CD1 */ | |
70d64048 | 668 | /* GPIO11_GPIO, IRQ0 */ |
e478fe4c EM |
669 | GPIO6_GPIO, /* IRQ1 */ |
670 | GPIO27_GPIO, /* RST0 */ | |
671 | GPIO24_GPIO, /* RST1 */ | |
672 | GPIO20_GPIO, /* PWR0 */ | |
673 | GPIO23_GPIO, /* PWR1 */ | |
674 | GPIO48_nPOE, | |
675 | GPIO49_nPWE, | |
676 | GPIO50_nPIOR, | |
677 | GPIO51_nPIOW, | |
678 | GPIO52_nPCE_1, | |
679 | GPIO53_nPCE_2, | |
680 | GPIO54_nPSKTSEL, | |
681 | GPIO55_nPREG, | |
682 | GPIO56_nPWAIT, | |
683 | GPIO57_nIOIS16, | |
684 | ||
685 | /* wakeup */ | |
686 | GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, | |
687 | }; | |
688 | ||
689 | /* ----------------- e750 tc6393xb parameters ------------------ */ | |
690 | ||
691 | static struct tc6393xb_platform_data e750_tc6393xb_info = { | |
692 | .irq_base = IRQ_BOARD_START, | |
693 | .scr_pll2cr = 0x0cc1, | |
694 | .scr_gper = 0, | |
695 | .gpio_base = -1, | |
696 | .suspend = &eseries_tmio_suspend, | |
697 | .resume = &eseries_tmio_resume, | |
698 | .enable = &eseries_tmio_enable, | |
699 | .disable = &eseries_tmio_disable, | |
700 | }; | |
701 | ||
702 | static struct platform_device e750_tc6393xb_device = { | |
703 | .name = "tc6393xb", | |
704 | .id = -1, | |
705 | .dev = { | |
706 | .platform_data = &e750_tc6393xb_info, | |
707 | }, | |
708 | .num_resources = 2, | |
709 | .resource = eseries_tmio_resources, | |
710 | }; | |
711 | ||
5eb2c3d9 AL |
712 | static struct platform_device e750_audio_device = { |
713 | .name = "e750-audio", | |
714 | .id = -1, | |
715 | }; | |
716 | ||
e478fe4c EM |
717 | /* ------------------------------------------------------------- */ |
718 | ||
719 | static struct platform_device *e750_devices[] __initdata = { | |
720 | &e750_fb_device, | |
721 | &e750_tc6393xb_device, | |
133dce06 | 722 | &e7xx_gpio_vbus, |
5eb2c3d9 | 723 | &e750_audio_device, |
e478fe4c EM |
724 | }; |
725 | ||
726 | static void __init e750_init(void) | |
727 | { | |
728 | pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); | |
729 | pxa_set_ffuart_info(NULL); | |
730 | pxa_set_btuart_info(NULL); | |
731 | pxa_set_stuart_info(NULL); | |
732 | clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, | |
733 | "GPIO11_CLK", NULL), | |
734 | eseries_get_tmio_gpios(); | |
735 | platform_add_devices(ARRAY_AND_SIZE(e750_devices)); | |
e478fe4c EM |
736 | pxa_set_ac97_info(NULL); |
737 | pxa_set_ficp_info(&e7xx_ficp_platform_data); | |
738 | } | |
739 | ||
740 | MACHINE_START(E750, "Toshiba e750") | |
741 | /* Maintainer: Ian Molton (spyro@f2s.com) */ | |
7375aba6 | 742 | .atag_offset = 0x100, |
851982c1 | 743 | .map_io = pxa25x_map_io, |
6ac6b817 | 744 | .nr_irqs = ESERIES_NR_IRQS, |
e478fe4c | 745 | .init_irq = pxa25x_init_irq, |
8a97ae2f | 746 | .handle_irq = pxa25x_handle_irq, |
e478fe4c EM |
747 | .fixup = eseries_fixup, |
748 | .init_machine = e750_init, | |
6bb27d73 | 749 | .init_time = pxa_timer_init, |
271a74fc | 750 | .restart = pxa_restart, |
e478fe4c EM |
751 | MACHINE_END |
752 | #endif | |
753 | ||
754 | #ifdef CONFIG_MACH_E800 | |
755 | /* ------------------------ e800 LCD definitions ------------------------- */ | |
756 | ||
757 | static unsigned long e800_pin_config[] __initdata = { | |
758 | /* AC97 */ | |
759 | GPIO28_AC97_BITCLK, | |
760 | GPIO29_AC97_SDATA_IN_0, | |
761 | GPIO30_AC97_SDATA_OUT, | |
762 | GPIO31_AC97_SYNC, | |
70d64048 RJ |
763 | |
764 | /* tc6393xb */ | |
765 | GPIO11_3_6MHz, | |
e478fe4c EM |
766 | }; |
767 | ||
768 | static struct w100_gen_regs e800_lcd_regs = { | |
769 | .lcd_format = 0x00008003, | |
770 | .lcdd_cntl1 = 0x02a00000, | |
771 | .lcdd_cntl2 = 0x0003ffff, | |
772 | .genlcd_cntl1 = 0x000ff2a3, | |
773 | .genlcd_cntl2 = 0x000002a3, | |
774 | .genlcd_cntl3 = 0x000102aa, | |
775 | }; | |
776 | ||
777 | static struct w100_mode e800_lcd_mode[2] = { | |
778 | [0] = { | |
779 | .xres = 480, | |
780 | .yres = 640, | |
781 | .left_margin = 52, | |
782 | .right_margin = 148, | |
783 | .upper_margin = 2, | |
784 | .lower_margin = 6, | |
785 | .crtc_ss = 0x80350034, | |
786 | .crtc_ls = 0x802b0026, | |
787 | .crtc_gs = 0x80160016, | |
788 | .crtc_vpos_gs = 0x00020003, | |
789 | .crtc_rev = 0x0040001d, | |
790 | .crtc_dclk = 0xe0000000, | |
791 | .crtc_gclk = 0x82a50049, | |
792 | .crtc_goe = 0x80ee001c, | |
793 | .crtc_ps1_active = 0x00000000, | |
794 | .pll_freq = 128, | |
795 | .pixclk_divider = 4, | |
796 | .pixclk_divider_rotated = 6, | |
797 | .pixclk_src = CLK_SRC_PLL, | |
798 | .sysclk_divider = 0, | |
799 | .sysclk_src = CLK_SRC_PLL, | |
800 | }, | |
801 | [1] = { | |
802 | .xres = 240, | |
803 | .yres = 320, | |
804 | .left_margin = 15, | |
805 | .right_margin = 88, | |
806 | .upper_margin = 0, | |
807 | .lower_margin = 7, | |
808 | .crtc_ss = 0xd010000f, | |
809 | .crtc_ls = 0x80070003, | |
810 | .crtc_gs = 0x80000000, | |
811 | .crtc_vpos_gs = 0x01460147, | |
812 | .crtc_rev = 0x00400003, | |
813 | .crtc_dclk = 0xa1700030, | |
814 | .crtc_gclk = 0x814b0008, | |
815 | .crtc_goe = 0x80cc0015, | |
816 | .crtc_ps1_active = 0x00000000, | |
817 | .pll_freq = 100, | |
818 | .pixclk_divider = 6, /* Wince uses 14 which gives a */ | |
819 | .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */ | |
820 | .pixclk_src = CLK_SRC_PLL, | |
821 | .sysclk_divider = 0, | |
822 | .sysclk_src = CLK_SRC_PLL, | |
823 | } | |
824 | }; | |
825 | ||
826 | ||
827 | static struct w100_gpio_regs e800_w100_gpio_info = { | |
828 | .init_data1 = 0xc13fc019, | |
829 | .gpio_dir1 = 0x3e40df7f, | |
830 | .gpio_oe1 = 0x003c3000, | |
831 | .init_data2 = 0x00000000, | |
832 | .gpio_dir2 = 0x00000000, | |
833 | .gpio_oe2 = 0x00000000, | |
834 | }; | |
835 | ||
836 | static struct w100_mem_info e800_w100_mem_info = { | |
837 | .ext_cntl = 0x09640011, | |
838 | .sdram_mode_reg = 0x00600021, | |
839 | .ext_timing_cntl = 0x10001545, | |
840 | .io_cntl = 0x7ddd7333, | |
841 | .size = 0x1fffff, | |
842 | }; | |
843 | ||
844 | static void e800_tg_change(struct w100fb_par *par) | |
845 | { | |
846 | unsigned long tmp; | |
847 | ||
848 | tmp = w100fb_gpio_read(W100_GPIO_PORT_A); | |
849 | if (par->mode->xres == 480) | |
850 | tmp |= 0x100; | |
851 | else | |
852 | tmp &= ~0x100; | |
853 | w100fb_gpio_write(W100_GPIO_PORT_A, tmp); | |
854 | } | |
855 | ||
856 | static struct w100_tg_info e800_tg_info = { | |
857 | .change = e800_tg_change, | |
858 | }; | |
859 | ||
860 | static struct w100fb_mach_info e800_fb_info = { | |
861 | .modelist = e800_lcd_mode, | |
862 | .num_modes = 2, | |
863 | .regs = &e800_lcd_regs, | |
864 | .gpio = &e800_w100_gpio_info, | |
865 | .mem = &e800_w100_mem_info, | |
866 | .tg = &e800_tg_info, | |
867 | .xtal_freq = 16000000, | |
868 | }; | |
869 | ||
870 | static struct resource e800_fb_resources[] = { | |
871 | [0] = { | |
872 | .start = 0x0c000000, | |
873 | .end = 0x0cffffff, | |
874 | .flags = IORESOURCE_MEM, | |
875 | }, | |
876 | }; | |
877 | ||
878 | static struct platform_device e800_fb_device = { | |
879 | .name = "w100fb", | |
880 | .id = -1, | |
881 | .dev = { | |
882 | .platform_data = &e800_fb_info, | |
883 | }, | |
884 | .num_resources = ARRAY_SIZE(e800_fb_resources), | |
885 | .resource = e800_fb_resources, | |
886 | }; | |
887 | ||
888 | /* --------------------------- UDC definitions --------------------------- */ | |
889 | ||
133dce06 | 890 | static struct gpio_vbus_mach_info e800_udc_info = { |
e478fe4c EM |
891 | .gpio_vbus = GPIO_E800_USB_DISC, |
892 | .gpio_pullup = GPIO_E800_USB_PULLUP, | |
893 | .gpio_pullup_inverted = 1 | |
894 | }; | |
895 | ||
133dce06 DES |
896 | static struct platform_device e800_gpio_vbus = { |
897 | .name = "gpio-vbus", | |
898 | .id = -1, | |
899 | .dev = { | |
900 | .platform_data = &e800_udc_info, | |
901 | }, | |
902 | }; | |
903 | ||
904 | ||
e478fe4c EM |
905 | /* ----------------- e800 tc6393xb parameters ------------------ */ |
906 | ||
907 | static struct tc6393xb_platform_data e800_tc6393xb_info = { | |
908 | .irq_base = IRQ_BOARD_START, | |
909 | .scr_pll2cr = 0x0cc1, | |
910 | .scr_gper = 0, | |
911 | .gpio_base = -1, | |
912 | .suspend = &eseries_tmio_suspend, | |
913 | .resume = &eseries_tmio_resume, | |
914 | .enable = &eseries_tmio_enable, | |
915 | .disable = &eseries_tmio_disable, | |
916 | }; | |
917 | ||
918 | static struct platform_device e800_tc6393xb_device = { | |
919 | .name = "tc6393xb", | |
920 | .id = -1, | |
921 | .dev = { | |
922 | .platform_data = &e800_tc6393xb_info, | |
923 | }, | |
924 | .num_resources = 2, | |
925 | .resource = eseries_tmio_resources, | |
926 | }; | |
927 | ||
1eb0202d AL |
928 | static struct platform_device e800_audio_device = { |
929 | .name = "e800-audio", | |
930 | .id = -1, | |
931 | }; | |
932 | ||
e478fe4c EM |
933 | /* ----------------------------------------------------------------------- */ |
934 | ||
935 | static struct platform_device *e800_devices[] __initdata = { | |
936 | &e800_fb_device, | |
937 | &e800_tc6393xb_device, | |
133dce06 | 938 | &e800_gpio_vbus, |
1eb0202d | 939 | &e800_audio_device, |
e478fe4c EM |
940 | }; |
941 | ||
942 | static void __init e800_init(void) | |
943 | { | |
944 | pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config)); | |
945 | pxa_set_ffuart_info(NULL); | |
946 | pxa_set_btuart_info(NULL); | |
947 | pxa_set_stuart_info(NULL); | |
948 | clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, | |
949 | "GPIO11_CLK", NULL), | |
950 | eseries_get_tmio_gpios(); | |
951 | platform_add_devices(ARRAY_AND_SIZE(e800_devices)); | |
e478fe4c EM |
952 | pxa_set_ac97_info(NULL); |
953 | } | |
954 | ||
955 | MACHINE_START(E800, "Toshiba e800") | |
956 | /* Maintainer: Ian Molton (spyro@f2s.com) */ | |
7375aba6 | 957 | .atag_offset = 0x100, |
851982c1 | 958 | .map_io = pxa25x_map_io, |
6ac6b817 | 959 | .nr_irqs = ESERIES_NR_IRQS, |
e478fe4c | 960 | .init_irq = pxa25x_init_irq, |
8a97ae2f | 961 | .handle_irq = pxa25x_handle_irq, |
e478fe4c EM |
962 | .fixup = eseries_fixup, |
963 | .init_machine = e800_init, | |
6bb27d73 | 964 | .init_time = pxa_timer_init, |
271a74fc | 965 | .restart = pxa_restart, |
e478fe4c EM |
966 | MACHINE_END |
967 | #endif |