Commit | Line | Data |
---|---|---|
eda6f6ec RJ |
1 | /* |
2 | * Handles the Mitac Mio A701 Board | |
3 | * | |
4 | * Copyright (C) 2008 Robert Jarzmik | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/platform_device.h> | |
2eaa03b5 | 25 | #include <linux/syscore_ops.h> |
eda6f6ec RJ |
26 | #include <linux/input.h> |
27 | #include <linux/delay.h> | |
28 | #include <linux/gpio_keys.h> | |
29 | #include <linux/pwm_backlight.h> | |
30 | #include <linux/rtc.h> | |
31 | #include <linux/leds.h> | |
32 | #include <linux/gpio.h> | |
33 | #include <linux/interrupt.h> | |
34 | #include <linux/irq.h> | |
35 | #include <linux/pda_power.h> | |
36 | #include <linux/power_supply.h> | |
241cf473 | 37 | #include <linux/wm97xx.h> |
eda6f6ec | 38 | #include <linux/mtd/physmap.h> |
689b4feb | 39 | #include <linux/usb/gpio_vbus.h> |
7b6d864b | 40 | #include <linux/reboot.h> |
9752e148 | 41 | #include <linux/regulator/max1586.h> |
5a0e3ad6 | 42 | #include <linux/slab.h> |
b459396e | 43 | #include <linux/i2c/pxa-i2c.h> |
eda6f6ec RJ |
44 | |
45 | #include <asm/mach-types.h> | |
46 | #include <asm/mach/arch.h> | |
51c62982 EM |
47 | |
48 | #include <mach/pxa27x.h> | |
5bf3df3f | 49 | #include <mach/regs-rtc.h> |
293b2da1 AB |
50 | #include <linux/platform_data/keypad-pxa27x.h> |
51 | #include <linux/platform_data/video-pxafb.h> | |
52 | #include <linux/platform_data/mmc-pxamci.h> | |
eda6f6ec RJ |
53 | #include <mach/udc.h> |
54 | #include <mach/pxa27x-udc.h> | |
293b2da1 | 55 | #include <linux/platform_data/camera-pxa.h> |
80748fb8 | 56 | #include <mach/audio.h> |
43a90877 | 57 | #include <mach/smemc.h> |
8e7ccddf | 58 | #include <media/soc_camera.h> |
eda6f6ec RJ |
59 | |
60 | #include <mach/mioa701.h> | |
61 | ||
62 | #include "generic.h" | |
63 | #include "devices.h" | |
64 | ||
65 | static unsigned long mioa701_pin_config[] = { | |
66 | /* Mio global */ | |
c96763d4 | 67 | MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW), |
eda6f6ec RJ |
68 | MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW), |
69 | MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH), | |
70 | MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH), | |
c96763d4 | 71 | MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0), |
eda6f6ec RJ |
72 | |
73 | /* Backlight PWM 0 */ | |
74 | GPIO16_PWM0_OUT, | |
75 | ||
76 | /* MMC */ | |
77 | GPIO32_MMC_CLK, | |
78 | GPIO92_MMC_DAT_0, | |
79 | GPIO109_MMC_DAT_1, | |
80 | GPIO110_MMC_DAT_2, | |
81 | GPIO111_MMC_DAT_3, | |
82 | GPIO112_MMC_CMD, | |
83 | MIO_CFG_IN(GPIO78_SDIO_RO, AF0), | |
84 | MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0), | |
85 | MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW), | |
86 | ||
87 | /* USB */ | |
c96763d4 | 88 | MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0), |
eda6f6ec RJ |
89 | MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW), |
90 | ||
91 | /* LCD */ | |
bedbda97 | 92 | GPIOxx_LCD_TFT_16BPP, |
eda6f6ec | 93 | |
8e7ccddf RJ |
94 | /* QCI */ |
95 | GPIO12_CIF_DD_7, | |
96 | GPIO17_CIF_DD_6, | |
97 | GPIO50_CIF_DD_3, | |
98 | GPIO51_CIF_DD_2, | |
99 | GPIO52_CIF_DD_4, | |
100 | GPIO53_CIF_MCLK, | |
101 | GPIO54_CIF_PCLK, | |
102 | GPIO55_CIF_DD_1, | |
103 | GPIO81_CIF_DD_0, | |
104 | GPIO82_CIF_DD_5, | |
105 | GPIO84_CIF_FV, | |
106 | GPIO85_CIF_LV, | |
c2219e4d | 107 | MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW), |
8e7ccddf | 108 | |
eda6f6ec | 109 | /* Bluetooth */ |
c96763d4 | 110 | MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0), |
eda6f6ec RJ |
111 | GPIO44_BTUART_CTS, |
112 | GPIO42_BTUART_RXD, | |
113 | GPIO45_BTUART_RTS, | |
114 | GPIO43_BTUART_TXD, | |
115 | MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW), | |
c96763d4 RJ |
116 | MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH), |
117 | MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH), | |
eda6f6ec RJ |
118 | |
119 | /* GPS */ | |
120 | MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW), | |
121 | MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW), | |
122 | MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW), | |
123 | MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW), | |
124 | MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW), | |
125 | GPIO46_STUART_RXD, | |
126 | GPIO47_STUART_TXD, | |
127 | ||
128 | /* GSM */ | |
129 | MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW), | |
130 | MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH), | |
131 | MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH), | |
132 | MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH), | |
133 | MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0), | |
134 | MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH, | |
135 | GPIO34_FFUART_RXD, | |
136 | GPIO35_FFUART_CTS, | |
137 | GPIO36_FFUART_DCD, | |
138 | GPIO37_FFUART_DSR, | |
139 | GPIO39_FFUART_TXD, | |
140 | GPIO40_FFUART_DTR, | |
141 | GPIO41_FFUART_RTS, | |
142 | ||
143 | /* Sound */ | |
c11b6a42 EM |
144 | GPIO28_AC97_BITCLK, |
145 | GPIO29_AC97_SDATA_IN_0, | |
146 | GPIO30_AC97_SDATA_OUT, | |
147 | GPIO31_AC97_SYNC, | |
eda6f6ec RJ |
148 | GPIO89_AC97_SYSCLK, |
149 | MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0), | |
150 | ||
151 | /* Leds */ | |
152 | MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH), | |
153 | MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH), | |
154 | MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH), | |
155 | MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH), | |
156 | MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH), | |
157 | ||
158 | /* Keyboard */ | |
159 | MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH, | |
160 | MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0), | |
161 | MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0), | |
162 | GPIO100_KP_MKIN_0, | |
163 | GPIO101_KP_MKIN_1, | |
164 | GPIO102_KP_MKIN_2, | |
165 | GPIO103_KP_MKOUT_0, | |
166 | GPIO104_KP_MKOUT_1, | |
167 | GPIO105_KP_MKOUT_2, | |
168 | ||
8e7ccddf RJ |
169 | /* I2C */ |
170 | GPIO117_I2C_SCL, | |
171 | GPIO118_I2C_SDA, | |
172 | ||
eda6f6ec | 173 | /* Unknown */ |
eda6f6ec RJ |
174 | MFP_CFG_IN(GPIO20, AF0), |
175 | MFP_CFG_IN(GPIO21, AF0), | |
176 | MFP_CFG_IN(GPIO33, AF0), | |
177 | MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH), | |
178 | MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), | |
eda6f6ec RJ |
179 | MFP_CFG_IN(GPIO96, AF0), |
180 | MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), | |
181 | }; | |
182 | ||
eda6f6ec RJ |
183 | /* LCD Screen and Backlight */ |
184 | static struct platform_pwm_backlight_data mioa701_backlight_data = { | |
185 | .pwm_id = 0, | |
186 | .max_brightness = 100, | |
187 | .dft_brightness = 50, | |
188 | .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */ | |
db01120c | 189 | .enable_gpio = -1, |
eda6f6ec RJ |
190 | }; |
191 | ||
192 | /* | |
193 | * LTM0305A776C LCD panel timings | |
194 | * | |
195 | * see: | |
196 | * - the LTM0305A776C datasheet, | |
197 | * - and the PXA27x Programmers' manual | |
198 | */ | |
199 | static struct pxafb_mode_info mioa701_ltm0305a776c = { | |
200 | .pixclock = 220000, /* CLK=4.545 MHz */ | |
201 | .xres = 240, | |
202 | .yres = 320, | |
203 | .bpp = 16, | |
204 | .hsync_len = 4, | |
205 | .vsync_len = 2, | |
206 | .left_margin = 6, | |
207 | .right_margin = 4, | |
208 | .upper_margin = 5, | |
209 | .lower_margin = 3, | |
210 | }; | |
211 | ||
212 | static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si) | |
213 | { | |
214 | gpio_set_value(GPIO87_LCD_POWER, on); | |
215 | } | |
216 | ||
217 | static struct pxafb_mach_info mioa701_pxafb_info = { | |
218 | .modes = &mioa701_ltm0305a776c, | |
219 | .num_modes = 1, | |
220 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, | |
221 | .pxafb_lcd_power = mioa701_lcd_power, | |
222 | }; | |
223 | ||
224 | /* | |
225 | * Keyboard configuration | |
226 | */ | |
0a085a94 | 227 | static const unsigned int mioa701_matrix_keys[] = { |
eda6f6ec RJ |
228 | KEY(0, 0, KEY_UP), |
229 | KEY(0, 1, KEY_RIGHT), | |
230 | KEY(0, 2, KEY_MEDIA), | |
231 | KEY(1, 0, KEY_DOWN), | |
232 | KEY(1, 1, KEY_ENTER), | |
233 | KEY(1, 2, KEY_CONNECT), /* GPS key */ | |
234 | KEY(2, 0, KEY_LEFT), | |
235 | KEY(2, 1, KEY_PHONE), /* Phone Green key */ | |
236 | KEY(2, 2, KEY_CAMERA) /* Camera key */ | |
237 | }; | |
0a085a94 CX |
238 | |
239 | static struct matrix_keymap_data mioa701_matrix_keymap_data = { | |
240 | .keymap = mioa701_matrix_keys, | |
241 | .keymap_size = ARRAY_SIZE(mioa701_matrix_keys), | |
242 | }; | |
243 | ||
eda6f6ec RJ |
244 | static struct pxa27x_keypad_platform_data mioa701_keypad_info = { |
245 | .matrix_key_rows = 3, | |
246 | .matrix_key_cols = 3, | |
0a085a94 | 247 | .matrix_keymap_data = &mioa701_matrix_keymap_data, |
eda6f6ec RJ |
248 | }; |
249 | ||
250 | /* | |
251 | * GPIO Key Configuration | |
252 | */ | |
253 | #define MIO_KEY(key, _gpio, _desc, _wakeup) \ | |
254 | { .code = (key), .gpio = (_gpio), .active_low = 0, \ | |
255 | .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) } | |
256 | static struct gpio_keys_button mioa701_button_table[] = { | |
257 | MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1), | |
258 | MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0), | |
259 | MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0), | |
260 | MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0) | |
261 | }; | |
262 | ||
263 | static struct gpio_keys_platform_data mioa701_gpio_keys_data = { | |
264 | .buttons = mioa701_button_table, | |
265 | .nbuttons = ARRAY_SIZE(mioa701_button_table), | |
266 | }; | |
267 | ||
268 | /* | |
269 | * Leds and vibrator | |
270 | */ | |
271 | #define ONE_LED(_gpio, _name) \ | |
272 | { .gpio = (_gpio), .name = (_name), .active_low = true } | |
273 | static struct gpio_led gpio_leds[] = { | |
274 | ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"), | |
275 | ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"), | |
276 | ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"), | |
277 | ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"), | |
278 | ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard") | |
279 | }; | |
280 | ||
281 | static struct gpio_led_platform_data gpio_led_info = { | |
282 | .leds = gpio_leds, | |
283 | .num_leds = ARRAY_SIZE(gpio_leds), | |
284 | }; | |
285 | ||
286 | /* | |
287 | * GSM Sagem XS200 chip | |
288 | * | |
289 | * GSM handling was purged from kernel. For history, this is the way to go : | |
290 | * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1 | |
291 | * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1 | |
292 | * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100), | |
293 | * GPIO24_GSM_MOD_RESET_CMD = 0 | |
294 | * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000), | |
295 | * GPIO88_GSM_nMOD_ON_CMD = 1 | |
296 | * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000), | |
297 | * GPIO90_GSM_nMOD_OFF_CMD = 1 | |
298 | */ | |
299 | static int is_gsm_on(void) | |
300 | { | |
301 | int is_on; | |
302 | ||
303 | is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE); | |
304 | return is_on; | |
305 | } | |
306 | ||
307 | irqreturn_t gsm_on_irq(int irq, void *p) | |
308 | { | |
309 | printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n", | |
310 | is_gsm_on() ? "on" : "off"); | |
311 | return IRQ_HANDLED; | |
312 | } | |
313 | ||
4c738b25 PZ |
314 | static struct gpio gsm_gpios[] = { |
315 | { GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" }, | |
316 | { GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" }, | |
eda6f6ec RJ |
317 | }; |
318 | ||
319 | static int __init gsm_init(void) | |
320 | { | |
321 | int rc; | |
322 | ||
4c738b25 | 323 | rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios)); |
eda6f6ec RJ |
324 | if (rc) |
325 | goto err_gpio; | |
326 | rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq, | |
327 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | |
328 | "GSM XS200 Power Irq", NULL); | |
329 | if (rc) | |
330 | goto err_irq; | |
331 | ||
332 | gpio_set_wake(GPIO113_GSM_EVENT, 1); | |
333 | return 0; | |
334 | ||
335 | err_irq: | |
336 | printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n"); | |
4c738b25 | 337 | gpio_free_array(ARRAY_AND_SIZE(gsm_gpios)); |
eda6f6ec RJ |
338 | err_gpio: |
339 | printk(KERN_ERR "Mioa701: gsm not available\n"); | |
340 | return rc; | |
341 | } | |
342 | ||
343 | static void gsm_exit(void) | |
344 | { | |
345 | free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL); | |
4c738b25 | 346 | gpio_free_array(ARRAY_AND_SIZE(gsm_gpios)); |
eda6f6ec RJ |
347 | } |
348 | ||
349 | /* | |
350 | * Bluetooth BRF6150 chip | |
351 | * | |
352 | * BT handling was purged from kernel. For history, this is the way to go : | |
353 | * - turn on : GPIO83_BT_ON = 1 | |
354 | * - turn off : GPIO83_BT_ON = 0 | |
355 | */ | |
356 | ||
357 | /* | |
358 | * GPS Sirf Star III chip | |
359 | * | |
360 | * GPS handling was purged from kernel. For history, this is the way to go : | |
361 | * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0 | |
362 | * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0 | |
363 | * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1 | |
364 | * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0 | |
365 | */ | |
366 | ||
367 | /* | |
368 | * USB UDC | |
369 | */ | |
eda6f6ec RJ |
370 | static int is_usb_connected(void) |
371 | { | |
c96763d4 | 372 | return !gpio_get_value(GPIO13_nUSB_DETECT); |
eda6f6ec RJ |
373 | } |
374 | ||
375 | static struct pxa2xx_udc_mach_info mioa701_udc_info = { | |
376 | .udc_is_connected = is_usb_connected, | |
cefdb2a4 | 377 | .gpio_pullup = GPIO22_USB_ENABLE, |
eda6f6ec RJ |
378 | }; |
379 | ||
689b4feb RJ |
380 | struct gpio_vbus_mach_info gpio_vbus_data = { |
381 | .gpio_vbus = GPIO13_nUSB_DETECT, | |
382 | .gpio_vbus_inverted = 1, | |
383 | .gpio_pullup = -1, | |
384 | }; | |
385 | ||
eda6f6ec RJ |
386 | /* |
387 | * SDIO/MMC Card controller | |
388 | */ | |
eda6f6ec RJ |
389 | /** |
390 | * The card detect interrupt isn't debounced so we delay it by 250ms | |
391 | * to give the card a chance to fully insert/eject. | |
392 | */ | |
eda6f6ec | 393 | static struct pxamci_platform_data mioa701_mci_info = { |
f97cab28 | 394 | .detect_delay_ms = 250, |
7a648256 RJ |
395 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
396 | .gpio_card_detect = GPIO15_SDIO_INSERT, | |
397 | .gpio_card_ro = GPIO78_SDIO_RO, | |
398 | .gpio_power = GPIO91_SDIO_EN, | |
eda6f6ec RJ |
399 | }; |
400 | ||
401 | /* FlashRAM */ | |
43a90877 | 402 | static struct resource docg3_resource = { |
eda6f6ec | 403 | .start = PXA_CS0_PHYS, |
43a90877 | 404 | .end = PXA_CS0_PHYS + SZ_8K - 1, |
eda6f6ec RJ |
405 | .flags = IORESOURCE_MEM, |
406 | }; | |
407 | ||
43a90877 RJ |
408 | static struct platform_device docg3 = { |
409 | .name = "docg3", | |
eda6f6ec | 410 | .id = -1, |
43a90877 | 411 | .resource = &docg3_resource, |
eda6f6ec RJ |
412 | .num_resources = 1, |
413 | .dev = { | |
43a90877 | 414 | .platform_data = NULL, |
eda6f6ec RJ |
415 | }, |
416 | }; | |
417 | ||
418 | /* | |
419 | * Suspend/Resume bootstrap management | |
420 | * | |
25985edc | 421 | * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled, |
eda6f6ec RJ |
422 | * this sequence is as follows : |
423 | * - disables interrupts | |
424 | * - initialize SDRAM (self refresh RAM into active RAM) | |
425 | * - initialize GPIOs (depends on value at 0xa020b020) | |
426 | * - initialize coprossessors | |
427 | * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start | |
428 | * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start | |
429 | * - else do a resume, ie. jump to addr 0xa0100000 | |
430 | */ | |
431 | #define RESUME_ENABLE_ADDR 0xa020b000 | |
432 | #define RESUME_ENABLE_VAL 0x0f0f0f0f | |
433 | #define RESUME_BT_ADDR 0xa020b020 | |
434 | #define RESUME_UNKNOWN_ADDR 0xa020b024 | |
435 | #define RESUME_VECTOR_ADDR 0xa0100000 | |
436 | #define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4 | |
437 | ||
438 | static u32 *save_buffer; | |
439 | ||
440 | static void install_bootstrap(void) | |
441 | { | |
442 | int i; | |
443 | u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR); | |
444 | u32 *src = &mioa701_bootstrap; | |
445 | ||
446 | for (i = 0; i < BOOTSTRAP_WORDS; i++) | |
447 | rom_bootstrap[i] = src[i]; | |
448 | } | |
449 | ||
450 | ||
2eaa03b5 | 451 | static int mioa701_sys_suspend(void) |
eda6f6ec RJ |
452 | { |
453 | int i = 0, is_bt_on; | |
454 | u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); | |
455 | u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR); | |
456 | u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR); | |
457 | u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); | |
458 | ||
459 | /* Devices prepare suspend */ | |
844c6f6a | 460 | is_bt_on = !!gpio_get_value(GPIO83_BT_ON); |
eda6f6ec RJ |
461 | pxa2xx_mfp_set_lpm(GPIO83_BT_ON, |
462 | is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW); | |
463 | ||
464 | for (i = 0; i < BOOTSTRAP_WORDS; i++) | |
465 | save_buffer[i] = mem_resume_vector[i]; | |
466 | save_buffer[i++] = *mem_resume_enabler; | |
467 | save_buffer[i++] = *mem_resume_bt; | |
468 | save_buffer[i++] = *mem_resume_unknown; | |
469 | ||
470 | *mem_resume_enabler = RESUME_ENABLE_VAL; | |
471 | *mem_resume_bt = is_bt_on; | |
472 | ||
473 | install_bootstrap(); | |
474 | return 0; | |
475 | } | |
476 | ||
2eaa03b5 | 477 | static void mioa701_sys_resume(void) |
eda6f6ec RJ |
478 | { |
479 | int i = 0; | |
480 | u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); | |
481 | u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR); | |
482 | u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR); | |
483 | u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); | |
484 | ||
485 | for (i = 0; i < BOOTSTRAP_WORDS; i++) | |
486 | mem_resume_vector[i] = save_buffer[i]; | |
487 | *mem_resume_enabler = save_buffer[i++]; | |
488 | *mem_resume_bt = save_buffer[i++]; | |
489 | *mem_resume_unknown = save_buffer[i++]; | |
eda6f6ec RJ |
490 | } |
491 | ||
2eaa03b5 RW |
492 | static struct syscore_ops mioa701_syscore_ops = { |
493 | .suspend = mioa701_sys_suspend, | |
494 | .resume = mioa701_sys_resume, | |
eda6f6ec RJ |
495 | }; |
496 | ||
497 | static int __init bootstrap_init(void) | |
498 | { | |
eda6f6ec RJ |
499 | int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3); |
500 | ||
2eaa03b5 | 501 | register_syscore_ops(&mioa701_syscore_ops); |
eda6f6ec RJ |
502 | |
503 | save_buffer = kmalloc(save_size, GFP_KERNEL); | |
504 | if (!save_buffer) | |
505 | return -ENOMEM; | |
506 | printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n", | |
507 | save_size); | |
508 | return 0; | |
509 | } | |
510 | ||
511 | static void bootstrap_exit(void) | |
512 | { | |
513 | kfree(save_buffer); | |
2eaa03b5 | 514 | unregister_syscore_ops(&mioa701_syscore_ops); |
eda6f6ec RJ |
515 | |
516 | printk(KERN_CRIT "Unregistering mioa701 suspend will hang next" | |
517 | "resume !!!\n"); | |
518 | } | |
519 | ||
520 | /* | |
521 | * Power Supply | |
522 | */ | |
523 | static char *supplicants[] = { | |
524 | "mioa701_battery" | |
525 | }; | |
526 | ||
4aa89f97 RJ |
527 | static int is_ac_connected(void) |
528 | { | |
529 | return gpio_get_value(GPIO96_AC_DETECT); | |
530 | } | |
531 | ||
eda6f6ec RJ |
532 | static void mioa701_set_charge(int flags) |
533 | { | |
c96763d4 | 534 | gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB)); |
eda6f6ec RJ |
535 | } |
536 | ||
537 | static struct pda_power_pdata power_pdata = { | |
4aa89f97 RJ |
538 | .is_ac_online = is_ac_connected, |
539 | .is_usb_online = is_usb_connected, | |
eda6f6ec RJ |
540 | .set_charge = mioa701_set_charge, |
541 | .supplied_to = supplicants, | |
542 | .num_supplicants = ARRAY_SIZE(supplicants), | |
543 | }; | |
544 | ||
545 | static struct resource power_resources[] = { | |
546 | [0] = { | |
547 | .name = "ac", | |
4929f5a8 HZ |
548 | .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), |
549 | .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), | |
4aa89f97 RJ |
550 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | |
551 | IORESOURCE_IRQ_LOWEDGE, | |
552 | }, | |
553 | [1] = { | |
554 | .name = "usb", | |
4929f5a8 HZ |
555 | .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), |
556 | .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), | |
eda6f6ec RJ |
557 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | |
558 | IORESOURCE_IRQ_LOWEDGE, | |
559 | }, | |
560 | }; | |
561 | ||
562 | static struct platform_device power_dev = { | |
563 | .name = "pda-power", | |
564 | .id = -1, | |
565 | .resource = power_resources, | |
566 | .num_resources = ARRAY_SIZE(power_resources), | |
567 | .dev = { | |
568 | .platform_data = &power_pdata, | |
569 | }, | |
570 | }; | |
571 | ||
241cf473 | 572 | static struct wm97xx_batt_pdata mioa701_battery_data = { |
4aa89f97 RJ |
573 | .batt_aux = WM97XX_AUX_ID1, |
574 | .temp_aux = -1, | |
575 | .charge_gpio = -1, | |
576 | .min_voltage = 0xc00, | |
577 | .max_voltage = 0xfc0, | |
578 | .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, | |
579 | .batt_div = 1, | |
580 | .batt_mult = 1, | |
581 | .batt_name = "mioa701_battery", | |
eda6f6ec RJ |
582 | }; |
583 | ||
241cf473 MV |
584 | static struct wm97xx_pdata mioa701_wm97xx_pdata = { |
585 | .batt_pdata = &mioa701_battery_data, | |
586 | }; | |
587 | ||
9752e148 RJ |
588 | /* |
589 | * Voltage regulation | |
590 | */ | |
591 | static struct regulator_consumer_supply max1586_consumers[] = { | |
0bf189ab | 592 | REGULATOR_SUPPLY("vcc_core", NULL), |
9752e148 RJ |
593 | }; |
594 | ||
595 | static struct regulator_init_data max1586_v3_info = { | |
596 | .constraints = { | |
597 | .name = "vcc_core range", | |
598 | .min_uV = 1000000, | |
599 | .max_uV = 1705000, | |
600 | .always_on = 1, | |
601 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, | |
602 | }, | |
603 | .num_consumer_supplies = ARRAY_SIZE(max1586_consumers), | |
604 | .consumer_supplies = max1586_consumers, | |
605 | }; | |
606 | ||
607 | static struct max1586_subdev_data max1586_subdevs[] = { | |
608 | { .name = "vcc_core", .id = MAX1586_V3, | |
609 | .platform_data = &max1586_v3_info }, | |
610 | }; | |
611 | ||
612 | static struct max1586_platform_data max1586_info = { | |
613 | .subdevs = max1586_subdevs, | |
614 | .num_subdevs = ARRAY_SIZE(max1586_subdevs), | |
e567b74c | 615 | .v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */ |
9752e148 RJ |
616 | }; |
617 | ||
8e7ccddf RJ |
618 | /* |
619 | * Camera interface | |
620 | */ | |
621 | struct pxacamera_platform_data mioa701_pxacamera_platform_data = { | |
622 | .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | | |
623 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, | |
624 | .mclk_10khz = 5000, | |
eda6f6ec RJ |
625 | }; |
626 | ||
9752e148 RJ |
627 | static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { |
628 | { | |
629 | I2C_BOARD_INFO("max1586", 0x14), | |
630 | .platform_data = &max1586_info, | |
631 | }, | |
632 | }; | |
633 | ||
8e7ccddf | 634 | /* Board I2C devices. */ |
8dbed71a | 635 | static struct i2c_board_info mioa701_i2c_devices[] = { |
8e7ccddf | 636 | { |
8e7ccddf | 637 | I2C_BOARD_INFO("mt9m111", 0x5d), |
eda6f6ec | 638 | }, |
eda6f6ec RJ |
639 | }; |
640 | ||
a48c24a6 GL |
641 | static struct soc_camera_link iclink = { |
642 | .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */ | |
643 | .board_info = &mioa701_i2c_devices[0], | |
644 | .i2c_adapter_id = 0, | |
a48c24a6 GL |
645 | }; |
646 | ||
8e7ccddf RJ |
647 | struct i2c_pxa_platform_data i2c_pdata = { |
648 | .fast_mode = 1, | |
649 | }; | |
eda6f6ec | 650 | |
cc8d2730 RJ |
651 | static pxa2xx_audio_ops_t mioa701_ac97_info = { |
652 | .reset_gpio = 95, | |
241cf473 | 653 | .codec_pdata = { &mioa701_wm97xx_pdata, }, |
cc8d2730 RJ |
654 | }; |
655 | ||
eda6f6ec RJ |
656 | /* |
657 | * Mio global | |
658 | */ | |
659 | ||
660 | /* Devices */ | |
661 | #define MIO_PARENT_DEV(var, strname, tparent, pdata) \ | |
662 | static struct platform_device var = { \ | |
663 | .name = strname, \ | |
664 | .id = -1, \ | |
665 | .dev = { \ | |
666 | .platform_data = pdata, \ | |
667 | .parent = tparent, \ | |
668 | }, \ | |
669 | }; | |
670 | #define MIO_SIMPLE_DEV(var, strname, pdata) \ | |
671 | MIO_PARENT_DEV(var, strname, NULL, pdata) | |
672 | ||
673 | MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data) | |
674 | MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, | |
675 | &mioa701_backlight_data); | |
676 | MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) | |
677 | MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) | |
eda6f6ec RJ |
678 | MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) |
679 | MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) | |
689b4feb | 680 | MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); |
a48c24a6 | 681 | MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink); |
eda6f6ec RJ |
682 | |
683 | static struct platform_device *devices[] __initdata = { | |
684 | &mioa701_gpio_keys, | |
685 | &mioa701_backlight, | |
686 | &mioa701_led, | |
687 | &pxa2xx_pcm, | |
eda6f6ec RJ |
688 | &mioa701_sound, |
689 | &power_dev, | |
43a90877 | 690 | &docg3, |
689b4feb | 691 | &gpio_vbus, |
a48c24a6 | 692 | &mioa701_camera, |
689b4feb | 693 | &mioa701_board, |
eda6f6ec RJ |
694 | }; |
695 | ||
696 | static void mioa701_machine_exit(void); | |
697 | ||
698 | static void mioa701_poweroff(void) | |
699 | { | |
700 | mioa701_machine_exit(); | |
7b6d864b | 701 | pxa_restart(REBOOT_SOFT, NULL); |
eda6f6ec RJ |
702 | } |
703 | ||
7b6d864b | 704 | static void mioa701_restart(enum reboot_mode c, const char *cmd) |
eda6f6ec RJ |
705 | { |
706 | mioa701_machine_exit(); | |
7b6d864b | 707 | pxa_restart(REBOOT_SOFT, cmd); |
eda6f6ec RJ |
708 | } |
709 | ||
4c738b25 PZ |
710 | static struct gpio global_gpios[] = { |
711 | { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" }, | |
712 | { GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" }, | |
713 | { GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" }, | |
c2219e4d | 714 | { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" }, |
eda6f6ec RJ |
715 | }; |
716 | ||
717 | static void __init mioa701_machine_init(void) | |
718 | { | |
4c738b25 PZ |
719 | int rc; |
720 | ||
eda6f6ec RJ |
721 | PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */ |
722 | PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE; | |
723 | RTTR = 32768 - 1; /* Reset crazy WinCE value */ | |
724 | UP2OCR = UP2OCR_HXOE; | |
725 | ||
43a90877 RJ |
726 | /* |
727 | * Set up the flash memory : DiskOnChip G3 on first static memory bank | |
728 | */ | |
729 | __raw_writel(0x7ff02dd8, MSC0); | |
730 | __raw_writel(0x0001c391, MCMEM0); | |
731 | __raw_writel(0x0001c391, MCATT0); | |
732 | __raw_writel(0x0001c391, MCIO0); | |
733 | ||
734 | ||
eda6f6ec | 735 | pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); |
cc155c6f RK |
736 | pxa_set_ffuart_info(NULL); |
737 | pxa_set_btuart_info(NULL); | |
738 | pxa_set_stuart_info(NULL); | |
4c738b25 PZ |
739 | rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); |
740 | if (rc) | |
741 | pr_err("MioA701: Failed to request GPIOs: %d", rc); | |
eda6f6ec | 742 | bootstrap_init(); |
4321e1a1 | 743 | pxa_set_fb_info(NULL, &mioa701_pxafb_info); |
eda6f6ec RJ |
744 | pxa_set_mci_info(&mioa701_mci_info); |
745 | pxa_set_keypad_info(&mioa701_keypad_info); | |
cefdb2a4 | 746 | pxa_set_udc_info(&mioa701_udc_info); |
cc8d2730 | 747 | pxa_set_ac97_info(&mioa701_ac97_info); |
eda6f6ec | 748 | pm_power_off = mioa701_poweroff; |
eda6f6ec RJ |
749 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
750 | gsm_init(); | |
8e7ccddf | 751 | |
9752e148 | 752 | i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices)); |
8e7ccddf | 753 | pxa_set_i2c_info(&i2c_pdata); |
9752e148 | 754 | pxa27x_set_i2c_power_info(NULL); |
8e7ccddf | 755 | pxa_set_camera_info(&mioa701_pxacamera_platform_data); |
eda6f6ec RJ |
756 | } |
757 | ||
758 | static void mioa701_machine_exit(void) | |
759 | { | |
eda6f6ec RJ |
760 | bootstrap_exit(); |
761 | gsm_exit(); | |
762 | } | |
763 | ||
764 | MACHINE_START(MIOA701, "MIO A701") | |
7375aba6 | 765 | .atag_offset = 0x100, |
851982c1 | 766 | .map_io = &pxa27x_map_io, |
4e611091 | 767 | .nr_irqs = PXA_NR_IRQS, |
eda6f6ec | 768 | .init_irq = &pxa27x_init_irq, |
8a97ae2f | 769 | .handle_irq = &pxa27x_handle_irq, |
eda6f6ec | 770 | .init_machine = mioa701_machine_init, |
6bb27d73 | 771 | .init_time = pxa_timer_init, |
271a74fc | 772 | .restart = mioa701_restart, |
eda6f6ec | 773 | MACHINE_END |