Commit | Line | Data |
---|---|---|
eda6f6ec RJ |
1 | /* |
2 | * Handles the Mitac Mio A701 Board | |
3 | * | |
4 | * Copyright (C) 2008 Robert Jarzmik | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/platform_device.h> | |
25 | #include <linux/sysdev.h> | |
26 | #include <linux/input.h> | |
27 | #include <linux/delay.h> | |
28 | #include <linux/gpio_keys.h> | |
29 | #include <linux/pwm_backlight.h> | |
30 | #include <linux/rtc.h> | |
31 | #include <linux/leds.h> | |
32 | #include <linux/gpio.h> | |
33 | #include <linux/interrupt.h> | |
34 | #include <linux/irq.h> | |
35 | #include <linux/pda_power.h> | |
36 | #include <linux/power_supply.h> | |
4aa89f97 | 37 | #include <linux/wm97xx_batt.h> |
eda6f6ec | 38 | #include <linux/mtd/physmap.h> |
689b4feb | 39 | #include <linux/usb/gpio_vbus.h> |
9752e148 | 40 | #include <linux/regulator/max1586.h> |
eda6f6ec RJ |
41 | |
42 | #include <asm/mach-types.h> | |
43 | #include <asm/mach/arch.h> | |
51c62982 EM |
44 | |
45 | #include <mach/pxa27x.h> | |
5bf3df3f | 46 | #include <mach/regs-rtc.h> |
eda6f6ec RJ |
47 | #include <mach/pxa27x_keypad.h> |
48 | #include <mach/pxafb.h> | |
eda6f6ec RJ |
49 | #include <mach/mmc.h> |
50 | #include <mach/udc.h> | |
51 | #include <mach/pxa27x-udc.h> | |
f0a83701 | 52 | #include <plat/i2c.h> |
8e7ccddf | 53 | #include <mach/camera.h> |
80748fb8 | 54 | #include <mach/audio.h> |
8e7ccddf | 55 | #include <media/soc_camera.h> |
eda6f6ec RJ |
56 | |
57 | #include <mach/mioa701.h> | |
58 | ||
59 | #include "generic.h" | |
60 | #include "devices.h" | |
61 | ||
62 | static unsigned long mioa701_pin_config[] = { | |
63 | /* Mio global */ | |
c96763d4 | 64 | MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW), |
eda6f6ec RJ |
65 | MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW), |
66 | MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH), | |
67 | MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH), | |
c96763d4 | 68 | MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0), |
eda6f6ec RJ |
69 | |
70 | /* Backlight PWM 0 */ | |
71 | GPIO16_PWM0_OUT, | |
72 | ||
73 | /* MMC */ | |
74 | GPIO32_MMC_CLK, | |
75 | GPIO92_MMC_DAT_0, | |
76 | GPIO109_MMC_DAT_1, | |
77 | GPIO110_MMC_DAT_2, | |
78 | GPIO111_MMC_DAT_3, | |
79 | GPIO112_MMC_CMD, | |
80 | MIO_CFG_IN(GPIO78_SDIO_RO, AF0), | |
81 | MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0), | |
82 | MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW), | |
83 | ||
84 | /* USB */ | |
c96763d4 | 85 | MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0), |
eda6f6ec RJ |
86 | MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW), |
87 | ||
88 | /* LCD */ | |
89 | GPIO58_LCD_LDD_0, | |
90 | GPIO59_LCD_LDD_1, | |
91 | GPIO60_LCD_LDD_2, | |
92 | GPIO61_LCD_LDD_3, | |
93 | GPIO62_LCD_LDD_4, | |
94 | GPIO63_LCD_LDD_5, | |
95 | GPIO64_LCD_LDD_6, | |
96 | GPIO65_LCD_LDD_7, | |
97 | GPIO66_LCD_LDD_8, | |
98 | GPIO67_LCD_LDD_9, | |
99 | GPIO68_LCD_LDD_10, | |
100 | GPIO69_LCD_LDD_11, | |
101 | GPIO70_LCD_LDD_12, | |
102 | GPIO71_LCD_LDD_13, | |
103 | GPIO72_LCD_LDD_14, | |
104 | GPIO73_LCD_LDD_15, | |
105 | GPIO74_LCD_FCLK, | |
106 | GPIO75_LCD_LCLK, | |
107 | GPIO76_LCD_PCLK, | |
108 | ||
8e7ccddf RJ |
109 | /* QCI */ |
110 | GPIO12_CIF_DD_7, | |
111 | GPIO17_CIF_DD_6, | |
112 | GPIO50_CIF_DD_3, | |
113 | GPIO51_CIF_DD_2, | |
114 | GPIO52_CIF_DD_4, | |
115 | GPIO53_CIF_MCLK, | |
116 | GPIO54_CIF_PCLK, | |
117 | GPIO55_CIF_DD_1, | |
118 | GPIO81_CIF_DD_0, | |
119 | GPIO82_CIF_DD_5, | |
120 | GPIO84_CIF_FV, | |
121 | GPIO85_CIF_LV, | |
122 | ||
eda6f6ec | 123 | /* Bluetooth */ |
c96763d4 | 124 | MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0), |
eda6f6ec RJ |
125 | GPIO44_BTUART_CTS, |
126 | GPIO42_BTUART_RXD, | |
127 | GPIO45_BTUART_RTS, | |
128 | GPIO43_BTUART_TXD, | |
129 | MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW), | |
c96763d4 RJ |
130 | MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH), |
131 | MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH), | |
eda6f6ec RJ |
132 | |
133 | /* GPS */ | |
134 | MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW), | |
135 | MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW), | |
136 | MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW), | |
137 | MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW), | |
138 | MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW), | |
139 | GPIO46_STUART_RXD, | |
140 | GPIO47_STUART_TXD, | |
141 | ||
142 | /* GSM */ | |
143 | MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW), | |
144 | MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH), | |
145 | MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH), | |
146 | MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH), | |
147 | MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0), | |
148 | MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH, | |
149 | GPIO34_FFUART_RXD, | |
150 | GPIO35_FFUART_CTS, | |
151 | GPIO36_FFUART_DCD, | |
152 | GPIO37_FFUART_DSR, | |
153 | GPIO39_FFUART_TXD, | |
154 | GPIO40_FFUART_DTR, | |
155 | GPIO41_FFUART_RTS, | |
156 | ||
157 | /* Sound */ | |
158 | GPIO89_AC97_SYSCLK, | |
159 | MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0), | |
160 | ||
161 | /* Leds */ | |
162 | MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH), | |
163 | MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH), | |
164 | MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH), | |
165 | MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH), | |
166 | MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH), | |
167 | ||
168 | /* Keyboard */ | |
169 | MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH, | |
170 | MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0), | |
171 | MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0), | |
172 | GPIO100_KP_MKIN_0, | |
173 | GPIO101_KP_MKIN_1, | |
174 | GPIO102_KP_MKIN_2, | |
175 | GPIO103_KP_MKOUT_0, | |
176 | GPIO104_KP_MKOUT_1, | |
177 | GPIO105_KP_MKOUT_2, | |
178 | ||
8e7ccddf RJ |
179 | /* I2C */ |
180 | GPIO117_I2C_SCL, | |
181 | GPIO118_I2C_SDA, | |
182 | ||
eda6f6ec | 183 | /* Unknown */ |
eda6f6ec RJ |
184 | MFP_CFG_IN(GPIO20, AF0), |
185 | MFP_CFG_IN(GPIO21, AF0), | |
186 | MFP_CFG_IN(GPIO33, AF0), | |
187 | MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH), | |
188 | MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), | |
eda6f6ec RJ |
189 | MFP_CFG_IN(GPIO96, AF0), |
190 | MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), | |
191 | }; | |
192 | ||
193 | #define MIO_GPIO_IN(num, _desc) \ | |
194 | { .gpio = (num), .dir = 0, .desc = (_desc) } | |
195 | #define MIO_GPIO_OUT(num, _init, _desc) \ | |
196 | { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } | |
197 | struct gpio_ress { | |
198 | unsigned gpio : 8; | |
199 | unsigned dir : 1; | |
200 | unsigned init : 1; | |
201 | char *desc; | |
202 | }; | |
203 | ||
204 | static int mio_gpio_request(struct gpio_ress *gpios, int size) | |
205 | { | |
206 | int i, rc = 0; | |
207 | int gpio; | |
208 | int dir; | |
209 | ||
210 | for (i = 0; (!rc) && (i < size); i++) { | |
211 | gpio = gpios[i].gpio; | |
212 | dir = gpios[i].dir; | |
213 | rc = gpio_request(gpio, gpios[i].desc); | |
214 | if (rc) { | |
215 | printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n", | |
216 | gpio, gpios[i].desc, rc); | |
217 | continue; | |
218 | } | |
219 | if (dir) | |
220 | gpio_direction_output(gpio, gpios[i].init); | |
221 | else | |
222 | gpio_direction_input(gpio); | |
223 | } | |
224 | while ((rc) && (--i >= 0)) | |
225 | gpio_free(gpios[i].gpio); | |
226 | return rc; | |
227 | } | |
228 | ||
229 | static void mio_gpio_free(struct gpio_ress *gpios, int size) | |
230 | { | |
231 | int i; | |
232 | ||
233 | for (i = 0; i < size; i++) | |
234 | gpio_free(gpios[i].gpio); | |
235 | } | |
236 | ||
237 | /* LCD Screen and Backlight */ | |
238 | static struct platform_pwm_backlight_data mioa701_backlight_data = { | |
239 | .pwm_id = 0, | |
240 | .max_brightness = 100, | |
241 | .dft_brightness = 50, | |
242 | .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */ | |
243 | }; | |
244 | ||
245 | /* | |
246 | * LTM0305A776C LCD panel timings | |
247 | * | |
248 | * see: | |
249 | * - the LTM0305A776C datasheet, | |
250 | * - and the PXA27x Programmers' manual | |
251 | */ | |
252 | static struct pxafb_mode_info mioa701_ltm0305a776c = { | |
253 | .pixclock = 220000, /* CLK=4.545 MHz */ | |
254 | .xres = 240, | |
255 | .yres = 320, | |
256 | .bpp = 16, | |
257 | .hsync_len = 4, | |
258 | .vsync_len = 2, | |
259 | .left_margin = 6, | |
260 | .right_margin = 4, | |
261 | .upper_margin = 5, | |
262 | .lower_margin = 3, | |
263 | }; | |
264 | ||
265 | static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si) | |
266 | { | |
267 | gpio_set_value(GPIO87_LCD_POWER, on); | |
268 | } | |
269 | ||
270 | static struct pxafb_mach_info mioa701_pxafb_info = { | |
271 | .modes = &mioa701_ltm0305a776c, | |
272 | .num_modes = 1, | |
273 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, | |
274 | .pxafb_lcd_power = mioa701_lcd_power, | |
275 | }; | |
276 | ||
277 | /* | |
278 | * Keyboard configuration | |
279 | */ | |
280 | static unsigned int mioa701_matrix_keys[] = { | |
281 | KEY(0, 0, KEY_UP), | |
282 | KEY(0, 1, KEY_RIGHT), | |
283 | KEY(0, 2, KEY_MEDIA), | |
284 | KEY(1, 0, KEY_DOWN), | |
285 | KEY(1, 1, KEY_ENTER), | |
286 | KEY(1, 2, KEY_CONNECT), /* GPS key */ | |
287 | KEY(2, 0, KEY_LEFT), | |
288 | KEY(2, 1, KEY_PHONE), /* Phone Green key */ | |
289 | KEY(2, 2, KEY_CAMERA) /* Camera key */ | |
290 | }; | |
291 | static struct pxa27x_keypad_platform_data mioa701_keypad_info = { | |
292 | .matrix_key_rows = 3, | |
293 | .matrix_key_cols = 3, | |
294 | .matrix_key_map = mioa701_matrix_keys, | |
295 | .matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys), | |
296 | }; | |
297 | ||
298 | /* | |
299 | * GPIO Key Configuration | |
300 | */ | |
301 | #define MIO_KEY(key, _gpio, _desc, _wakeup) \ | |
302 | { .code = (key), .gpio = (_gpio), .active_low = 0, \ | |
303 | .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) } | |
304 | static struct gpio_keys_button mioa701_button_table[] = { | |
305 | MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1), | |
306 | MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0), | |
307 | MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0), | |
308 | MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0) | |
309 | }; | |
310 | ||
311 | static struct gpio_keys_platform_data mioa701_gpio_keys_data = { | |
312 | .buttons = mioa701_button_table, | |
313 | .nbuttons = ARRAY_SIZE(mioa701_button_table), | |
314 | }; | |
315 | ||
316 | /* | |
317 | * Leds and vibrator | |
318 | */ | |
319 | #define ONE_LED(_gpio, _name) \ | |
320 | { .gpio = (_gpio), .name = (_name), .active_low = true } | |
321 | static struct gpio_led gpio_leds[] = { | |
322 | ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"), | |
323 | ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"), | |
324 | ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"), | |
325 | ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"), | |
326 | ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard") | |
327 | }; | |
328 | ||
329 | static struct gpio_led_platform_data gpio_led_info = { | |
330 | .leds = gpio_leds, | |
331 | .num_leds = ARRAY_SIZE(gpio_leds), | |
332 | }; | |
333 | ||
334 | /* | |
335 | * GSM Sagem XS200 chip | |
336 | * | |
337 | * GSM handling was purged from kernel. For history, this is the way to go : | |
338 | * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1 | |
339 | * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1 | |
340 | * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100), | |
341 | * GPIO24_GSM_MOD_RESET_CMD = 0 | |
342 | * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000), | |
343 | * GPIO88_GSM_nMOD_ON_CMD = 1 | |
344 | * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000), | |
345 | * GPIO90_GSM_nMOD_OFF_CMD = 1 | |
346 | */ | |
347 | static int is_gsm_on(void) | |
348 | { | |
349 | int is_on; | |
350 | ||
351 | is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE); | |
352 | return is_on; | |
353 | } | |
354 | ||
355 | irqreturn_t gsm_on_irq(int irq, void *p) | |
356 | { | |
357 | printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n", | |
358 | is_gsm_on() ? "on" : "off"); | |
359 | return IRQ_HANDLED; | |
360 | } | |
361 | ||
362 | struct gpio_ress gsm_gpios[] = { | |
363 | MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"), | |
364 | MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"), | |
365 | }; | |
366 | ||
367 | static int __init gsm_init(void) | |
368 | { | |
369 | int rc; | |
370 | ||
371 | rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios)); | |
372 | if (rc) | |
373 | goto err_gpio; | |
374 | rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq, | |
375 | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | |
376 | "GSM XS200 Power Irq", NULL); | |
377 | if (rc) | |
378 | goto err_irq; | |
379 | ||
380 | gpio_set_wake(GPIO113_GSM_EVENT, 1); | |
381 | return 0; | |
382 | ||
383 | err_irq: | |
384 | printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n"); | |
385 | mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); | |
386 | err_gpio: | |
387 | printk(KERN_ERR "Mioa701: gsm not available\n"); | |
388 | return rc; | |
389 | } | |
390 | ||
391 | static void gsm_exit(void) | |
392 | { | |
393 | free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL); | |
394 | mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); | |
395 | } | |
396 | ||
397 | /* | |
398 | * Bluetooth BRF6150 chip | |
399 | * | |
400 | * BT handling was purged from kernel. For history, this is the way to go : | |
401 | * - turn on : GPIO83_BT_ON = 1 | |
402 | * - turn off : GPIO83_BT_ON = 0 | |
403 | */ | |
404 | ||
405 | /* | |
406 | * GPS Sirf Star III chip | |
407 | * | |
408 | * GPS handling was purged from kernel. For history, this is the way to go : | |
409 | * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0 | |
410 | * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0 | |
411 | * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1 | |
412 | * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0 | |
413 | */ | |
414 | ||
415 | /* | |
416 | * USB UDC | |
417 | */ | |
eda6f6ec RJ |
418 | static int is_usb_connected(void) |
419 | { | |
c96763d4 | 420 | return !gpio_get_value(GPIO13_nUSB_DETECT); |
eda6f6ec RJ |
421 | } |
422 | ||
423 | static struct pxa2xx_udc_mach_info mioa701_udc_info = { | |
424 | .udc_is_connected = is_usb_connected, | |
cefdb2a4 | 425 | .gpio_pullup = GPIO22_USB_ENABLE, |
eda6f6ec RJ |
426 | }; |
427 | ||
689b4feb RJ |
428 | struct gpio_vbus_mach_info gpio_vbus_data = { |
429 | .gpio_vbus = GPIO13_nUSB_DETECT, | |
430 | .gpio_vbus_inverted = 1, | |
431 | .gpio_pullup = -1, | |
432 | }; | |
433 | ||
eda6f6ec RJ |
434 | /* |
435 | * SDIO/MMC Card controller | |
436 | */ | |
437 | static void mci_setpower(struct device *dev, unsigned int vdd) | |
438 | { | |
439 | struct pxamci_platform_data *p_d = dev->platform_data; | |
440 | ||
441 | if ((1 << vdd) & p_d->ocr_mask) | |
442 | gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */ | |
443 | else | |
444 | gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */ | |
445 | } | |
446 | ||
447 | static int mci_get_ro(struct device *dev) | |
448 | { | |
449 | return gpio_get_value(GPIO78_SDIO_RO); | |
450 | } | |
451 | ||
452 | struct gpio_ress mci_gpios[] = { | |
453 | MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"), | |
454 | MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"), | |
455 | MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable") | |
456 | }; | |
457 | ||
458 | static void mci_exit(struct device *dev, void *data) | |
459 | { | |
460 | mio_gpio_free(ARRAY_AND_SIZE(mci_gpios)); | |
461 | free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data); | |
462 | } | |
463 | ||
464 | static struct pxamci_platform_data mioa701_mci_info; | |
465 | ||
466 | /** | |
467 | * The card detect interrupt isn't debounced so we delay it by 250ms | |
468 | * to give the card a chance to fully insert/eject. | |
469 | */ | |
470 | static int mci_init(struct device *dev, irq_handler_t detect_int, void *data) | |
471 | { | |
472 | int rc; | |
473 | int irq = gpio_to_irq(GPIO15_SDIO_INSERT); | |
474 | ||
475 | rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios)); | |
476 | if (rc) | |
477 | goto err_gpio; | |
478 | /* enable RE/FE interrupt on card insertion and removal */ | |
479 | rc = request_irq(irq, detect_int, | |
480 | IRQF_DISABLED | IRQF_TRIGGER_RISING | | |
481 | IRQF_TRIGGER_FALLING, | |
482 | "MMC card detect", data); | |
483 | if (rc) | |
484 | goto err_irq; | |
485 | ||
486 | mioa701_mci_info.detect_delay = msecs_to_jiffies(250); | |
487 | return 0; | |
488 | ||
489 | err_irq: | |
490 | dev_err(dev, "mioa701_mci_init: MMC/SD:" | |
491 | " can't request MMC card detect IRQ\n"); | |
492 | mio_gpio_free(ARRAY_AND_SIZE(mci_gpios)); | |
493 | err_gpio: | |
494 | return rc; | |
495 | } | |
496 | ||
497 | static struct pxamci_platform_data mioa701_mci_info = { | |
498 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, | |
499 | .init = mci_init, | |
500 | .get_ro = mci_get_ro, | |
501 | .setpower = mci_setpower, | |
502 | .exit = mci_exit, | |
503 | }; | |
504 | ||
505 | /* FlashRAM */ | |
506 | static struct resource strataflash_resource = { | |
507 | .start = PXA_CS0_PHYS, | |
508 | .end = PXA_CS0_PHYS + SZ_64M - 1, | |
509 | .flags = IORESOURCE_MEM, | |
510 | }; | |
511 | ||
512 | static struct physmap_flash_data strataflash_data = { | |
513 | .width = 2, | |
514 | /* .set_vpp = mioa701_set_vpp, */ | |
515 | }; | |
516 | ||
517 | static struct platform_device strataflash = { | |
518 | .name = "physmap-flash", | |
519 | .id = -1, | |
520 | .resource = &strataflash_resource, | |
521 | .num_resources = 1, | |
522 | .dev = { | |
523 | .platform_data = &strataflash_data, | |
524 | }, | |
525 | }; | |
526 | ||
527 | /* | |
528 | * Suspend/Resume bootstrap management | |
529 | * | |
530 | * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled, | |
531 | * this sequence is as follows : | |
532 | * - disables interrupts | |
533 | * - initialize SDRAM (self refresh RAM into active RAM) | |
534 | * - initialize GPIOs (depends on value at 0xa020b020) | |
535 | * - initialize coprossessors | |
536 | * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start | |
537 | * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start | |
538 | * - else do a resume, ie. jump to addr 0xa0100000 | |
539 | */ | |
540 | #define RESUME_ENABLE_ADDR 0xa020b000 | |
541 | #define RESUME_ENABLE_VAL 0x0f0f0f0f | |
542 | #define RESUME_BT_ADDR 0xa020b020 | |
543 | #define RESUME_UNKNOWN_ADDR 0xa020b024 | |
544 | #define RESUME_VECTOR_ADDR 0xa0100000 | |
545 | #define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4 | |
546 | ||
547 | static u32 *save_buffer; | |
548 | ||
549 | static void install_bootstrap(void) | |
550 | { | |
551 | int i; | |
552 | u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR); | |
553 | u32 *src = &mioa701_bootstrap; | |
554 | ||
555 | for (i = 0; i < BOOTSTRAP_WORDS; i++) | |
556 | rom_bootstrap[i] = src[i]; | |
557 | } | |
558 | ||
559 | ||
560 | static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) | |
561 | { | |
562 | int i = 0, is_bt_on; | |
563 | u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); | |
564 | u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR); | |
565 | u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR); | |
566 | u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); | |
567 | ||
568 | /* Devices prepare suspend */ | |
844c6f6a | 569 | is_bt_on = !!gpio_get_value(GPIO83_BT_ON); |
eda6f6ec RJ |
570 | pxa2xx_mfp_set_lpm(GPIO83_BT_ON, |
571 | is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW); | |
572 | ||
573 | for (i = 0; i < BOOTSTRAP_WORDS; i++) | |
574 | save_buffer[i] = mem_resume_vector[i]; | |
575 | save_buffer[i++] = *mem_resume_enabler; | |
576 | save_buffer[i++] = *mem_resume_bt; | |
577 | save_buffer[i++] = *mem_resume_unknown; | |
578 | ||
579 | *mem_resume_enabler = RESUME_ENABLE_VAL; | |
580 | *mem_resume_bt = is_bt_on; | |
581 | ||
582 | install_bootstrap(); | |
583 | return 0; | |
584 | } | |
585 | ||
586 | static int mioa701_sys_resume(struct sys_device *sysdev) | |
587 | { | |
588 | int i = 0; | |
589 | u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR); | |
590 | u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR); | |
591 | u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR); | |
592 | u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); | |
593 | ||
594 | for (i = 0; i < BOOTSTRAP_WORDS; i++) | |
595 | mem_resume_vector[i] = save_buffer[i]; | |
596 | *mem_resume_enabler = save_buffer[i++]; | |
597 | *mem_resume_bt = save_buffer[i++]; | |
598 | *mem_resume_unknown = save_buffer[i++]; | |
599 | ||
600 | return 0; | |
601 | } | |
602 | ||
603 | static struct sysdev_class mioa701_sysclass = { | |
604 | .name = "mioa701", | |
605 | }; | |
606 | ||
607 | static struct sys_device sysdev_bootstrap = { | |
608 | .cls = &mioa701_sysclass, | |
609 | }; | |
610 | ||
611 | static struct sysdev_driver driver_bootstrap = { | |
612 | .suspend = &mioa701_sys_suspend, | |
613 | .resume = &mioa701_sys_resume, | |
614 | }; | |
615 | ||
616 | static int __init bootstrap_init(void) | |
617 | { | |
618 | int rc; | |
619 | int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3); | |
620 | ||
621 | rc = sysdev_class_register(&mioa701_sysclass); | |
622 | if (rc) { | |
623 | printk(KERN_ERR "Failed registering mioa701 sys class\n"); | |
624 | return -ENODEV; | |
625 | } | |
626 | rc = sysdev_register(&sysdev_bootstrap); | |
627 | if (rc) { | |
628 | printk(KERN_ERR "Failed registering mioa701 sys device\n"); | |
629 | return -ENODEV; | |
630 | } | |
631 | rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap); | |
632 | if (rc) { | |
633 | printk(KERN_ERR "Failed registering PMU sys driver\n"); | |
634 | return -ENODEV; | |
635 | } | |
636 | ||
637 | save_buffer = kmalloc(save_size, GFP_KERNEL); | |
638 | if (!save_buffer) | |
639 | return -ENOMEM; | |
640 | printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n", | |
641 | save_size); | |
642 | return 0; | |
643 | } | |
644 | ||
645 | static void bootstrap_exit(void) | |
646 | { | |
647 | kfree(save_buffer); | |
648 | sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap); | |
649 | sysdev_unregister(&sysdev_bootstrap); | |
650 | sysdev_class_unregister(&mioa701_sysclass); | |
651 | ||
652 | printk(KERN_CRIT "Unregistering mioa701 suspend will hang next" | |
653 | "resume !!!\n"); | |
654 | } | |
655 | ||
656 | /* | |
657 | * Power Supply | |
658 | */ | |
659 | static char *supplicants[] = { | |
660 | "mioa701_battery" | |
661 | }; | |
662 | ||
4aa89f97 RJ |
663 | static int is_ac_connected(void) |
664 | { | |
665 | return gpio_get_value(GPIO96_AC_DETECT); | |
666 | } | |
667 | ||
eda6f6ec RJ |
668 | static void mioa701_set_charge(int flags) |
669 | { | |
c96763d4 | 670 | gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB)); |
eda6f6ec RJ |
671 | } |
672 | ||
673 | static struct pda_power_pdata power_pdata = { | |
4aa89f97 RJ |
674 | .is_ac_online = is_ac_connected, |
675 | .is_usb_online = is_usb_connected, | |
eda6f6ec RJ |
676 | .set_charge = mioa701_set_charge, |
677 | .supplied_to = supplicants, | |
678 | .num_supplicants = ARRAY_SIZE(supplicants), | |
679 | }; | |
680 | ||
681 | static struct resource power_resources[] = { | |
682 | [0] = { | |
683 | .name = "ac", | |
4aa89f97 RJ |
684 | .start = gpio_to_irq(GPIO96_AC_DETECT), |
685 | .end = gpio_to_irq(GPIO96_AC_DETECT), | |
686 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | | |
687 | IORESOURCE_IRQ_LOWEDGE, | |
688 | }, | |
689 | [1] = { | |
690 | .name = "usb", | |
c96763d4 RJ |
691 | .start = gpio_to_irq(GPIO13_nUSB_DETECT), |
692 | .end = gpio_to_irq(GPIO13_nUSB_DETECT), | |
eda6f6ec RJ |
693 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | |
694 | IORESOURCE_IRQ_LOWEDGE, | |
695 | }, | |
696 | }; | |
697 | ||
698 | static struct platform_device power_dev = { | |
699 | .name = "pda-power", | |
700 | .id = -1, | |
701 | .resource = power_resources, | |
702 | .num_resources = ARRAY_SIZE(power_resources), | |
703 | .dev = { | |
704 | .platform_data = &power_pdata, | |
705 | }, | |
706 | }; | |
707 | ||
4aa89f97 RJ |
708 | static struct wm97xx_batt_info mioa701_battery_data = { |
709 | .batt_aux = WM97XX_AUX_ID1, | |
710 | .temp_aux = -1, | |
711 | .charge_gpio = -1, | |
712 | .min_voltage = 0xc00, | |
713 | .max_voltage = 0xfc0, | |
714 | .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, | |
715 | .batt_div = 1, | |
716 | .batt_mult = 1, | |
717 | .batt_name = "mioa701_battery", | |
eda6f6ec RJ |
718 | }; |
719 | ||
9752e148 RJ |
720 | /* |
721 | * Voltage regulation | |
722 | */ | |
723 | static struct regulator_consumer_supply max1586_consumers[] = { | |
724 | { | |
725 | .supply = "vcc_core", | |
726 | } | |
727 | }; | |
728 | ||
729 | static struct regulator_init_data max1586_v3_info = { | |
730 | .constraints = { | |
731 | .name = "vcc_core range", | |
732 | .min_uV = 1000000, | |
733 | .max_uV = 1705000, | |
734 | .always_on = 1, | |
735 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, | |
736 | }, | |
737 | .num_consumer_supplies = ARRAY_SIZE(max1586_consumers), | |
738 | .consumer_supplies = max1586_consumers, | |
739 | }; | |
740 | ||
741 | static struct max1586_subdev_data max1586_subdevs[] = { | |
742 | { .name = "vcc_core", .id = MAX1586_V3, | |
743 | .platform_data = &max1586_v3_info }, | |
744 | }; | |
745 | ||
746 | static struct max1586_platform_data max1586_info = { | |
747 | .subdevs = max1586_subdevs, | |
748 | .num_subdevs = ARRAY_SIZE(max1586_subdevs), | |
749 | }; | |
750 | ||
8e7ccddf RJ |
751 | /* |
752 | * Camera interface | |
753 | */ | |
754 | struct pxacamera_platform_data mioa701_pxacamera_platform_data = { | |
755 | .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | | |
756 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, | |
757 | .mclk_10khz = 5000, | |
eda6f6ec RJ |
758 | }; |
759 | ||
9752e148 RJ |
760 | static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { |
761 | { | |
762 | I2C_BOARD_INFO("max1586", 0x14), | |
763 | .platform_data = &max1586_info, | |
764 | }, | |
765 | }; | |
766 | ||
8e7ccddf RJ |
767 | static struct soc_camera_link iclink = { |
768 | .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */ | |
eda6f6ec RJ |
769 | }; |
770 | ||
8e7ccddf RJ |
771 | /* Board I2C devices. */ |
772 | static struct i2c_board_info __initdata mioa701_i2c_devices[] = { | |
773 | { | |
774 | /* Must initialize before the camera(s) */ | |
775 | I2C_BOARD_INFO("mt9m111", 0x5d), | |
776 | .platform_data = &iclink, | |
eda6f6ec | 777 | }, |
eda6f6ec RJ |
778 | }; |
779 | ||
8e7ccddf RJ |
780 | struct i2c_pxa_platform_data i2c_pdata = { |
781 | .fast_mode = 1, | |
782 | }; | |
eda6f6ec | 783 | |
cc8d2730 RJ |
784 | static pxa2xx_audio_ops_t mioa701_ac97_info = { |
785 | .reset_gpio = 95, | |
786 | }; | |
787 | ||
eda6f6ec RJ |
788 | /* |
789 | * Mio global | |
790 | */ | |
791 | ||
792 | /* Devices */ | |
793 | #define MIO_PARENT_DEV(var, strname, tparent, pdata) \ | |
794 | static struct platform_device var = { \ | |
795 | .name = strname, \ | |
796 | .id = -1, \ | |
797 | .dev = { \ | |
798 | .platform_data = pdata, \ | |
799 | .parent = tparent, \ | |
800 | }, \ | |
801 | }; | |
802 | #define MIO_SIMPLE_DEV(var, strname, pdata) \ | |
803 | MIO_PARENT_DEV(var, strname, NULL, pdata) | |
804 | ||
805 | MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data) | |
806 | MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, | |
807 | &mioa701_backlight_data); | |
808 | MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) | |
809 | MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) | |
eda6f6ec RJ |
810 | MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) |
811 | MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) | |
689b4feb | 812 | MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); |
eda6f6ec RJ |
813 | |
814 | static struct platform_device *devices[] __initdata = { | |
815 | &mioa701_gpio_keys, | |
816 | &mioa701_backlight, | |
817 | &mioa701_led, | |
818 | &pxa2xx_pcm, | |
eda6f6ec RJ |
819 | &mioa701_sound, |
820 | &power_dev, | |
821 | &strataflash, | |
689b4feb RJ |
822 | &gpio_vbus, |
823 | &mioa701_board, | |
eda6f6ec RJ |
824 | }; |
825 | ||
826 | static void mioa701_machine_exit(void); | |
827 | ||
828 | static void mioa701_poweroff(void) | |
829 | { | |
830 | mioa701_machine_exit(); | |
be093beb | 831 | arm_machine_restart('s', NULL); |
eda6f6ec RJ |
832 | } |
833 | ||
be093beb | 834 | static void mioa701_restart(char c, const char *cmd) |
eda6f6ec RJ |
835 | { |
836 | mioa701_machine_exit(); | |
be093beb | 837 | arm_machine_restart('s', cmd); |
eda6f6ec RJ |
838 | } |
839 | ||
18473473 | 840 | static struct gpio_ress global_gpios[] = { |
c96763d4 | 841 | MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"), |
eda6f6ec RJ |
842 | MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), |
843 | MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power") | |
844 | }; | |
845 | ||
846 | static void __init mioa701_machine_init(void) | |
847 | { | |
848 | PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */ | |
849 | PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE; | |
850 | RTTR = 32768 - 1; /* Reset crazy WinCE value */ | |
851 | UP2OCR = UP2OCR_HXOE; | |
852 | ||
853 | pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config)); | |
854 | mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); | |
855 | bootstrap_init(); | |
856 | set_pxa_fb_info(&mioa701_pxafb_info); | |
857 | pxa_set_mci_info(&mioa701_mci_info); | |
858 | pxa_set_keypad_info(&mioa701_keypad_info); | |
4aa89f97 | 859 | wm97xx_bat_set_pdata(&mioa701_battery_data); |
cefdb2a4 | 860 | pxa_set_udc_info(&mioa701_udc_info); |
cc8d2730 | 861 | pxa_set_ac97_info(&mioa701_ac97_info); |
eda6f6ec RJ |
862 | pm_power_off = mioa701_poweroff; |
863 | arm_pm_restart = mioa701_restart; | |
864 | platform_add_devices(devices, ARRAY_SIZE(devices)); | |
865 | gsm_init(); | |
8e7ccddf | 866 | |
9752e148 | 867 | i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices)); |
8e7ccddf | 868 | pxa_set_i2c_info(&i2c_pdata); |
9752e148 | 869 | pxa27x_set_i2c_power_info(NULL); |
8e7ccddf RJ |
870 | pxa_set_camera_info(&mioa701_pxacamera_platform_data); |
871 | i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices)); | |
eda6f6ec RJ |
872 | } |
873 | ||
874 | static void mioa701_machine_exit(void) | |
875 | { | |
eda6f6ec RJ |
876 | bootstrap_exit(); |
877 | gsm_exit(); | |
878 | } | |
879 | ||
880 | MACHINE_START(MIOA701, "MIO A701") | |
881 | .phys_io = 0x40000000, | |
882 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
883 | .boot_params = 0xa0000100, | |
884 | .map_io = &pxa_map_io, | |
885 | .init_irq = &pxa27x_init_irq, | |
886 | .init_machine = mioa701_machine_init, | |
887 | .timer = &pxa_timer, | |
888 | MACHINE_END |