Commit | Line | Data |
---|---|---|
2e927b76 RS |
1 | /* |
2 | * arch/arm/mach-pxa/pcm990-baseboard.c | |
3 | * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990). | |
4 | * | |
5 | * Refer | |
6 | * http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html | |
7 | * for additional hardware info | |
8 | * | |
9 | * Author: Juergen Kilb | |
10 | * Created: April 05, 2005 | |
11 | * Copyright: Phytec Messtechnik GmbH | |
12 | * e-Mail: armlinux@phytec.de | |
13 | * | |
14 | * based on Intel Mainstone Board | |
15 | * | |
16 | * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) | |
17 | * | |
18 | * This program is free software; you can redistribute it and/or modify | |
19 | * it under the terms of the GNU General Public License version 2 as | |
20 | * published by the Free Software Foundation. | |
21 | */ | |
2f8163ba | 22 | #include <linux/gpio.h> |
2e927b76 RS |
23 | #include <linux/irq.h> |
24 | #include <linux/platform_device.h> | |
58762e77 | 25 | #include <linux/i2c.h> |
b459396e | 26 | #include <linux/i2c/pxa-i2c.h> |
c0f7edb3 | 27 | #include <linux/pwm_backlight.h> |
58762e77 | 28 | |
b6f50b49 | 29 | #include <media/mt9v022.h> |
58762e77 GL |
30 | #include <media/soc_camera.h> |
31 | ||
293b2da1 | 32 | #include <linux/platform_data/camera-pxa.h> |
2e927b76 | 33 | #include <asm/mach/map.h> |
51c62982 | 34 | #include <mach/pxa27x.h> |
a09e64fb | 35 | #include <mach/audio.h> |
293b2da1 AB |
36 | #include <linux/platform_data/mmc-pxamci.h> |
37 | #include <linux/platform_data/usb-ohci-pxa27x.h> | |
a09e64fb | 38 | #include <mach/pcm990_baseboard.h> |
293b2da1 | 39 | #include <linux/platform_data/video-pxafb.h> |
c0f7edb3 GL |
40 | |
41 | #include "devices.h" | |
6a566fbb GL |
42 | #include "generic.h" |
43 | ||
44 | static unsigned long pcm990_pin_config[] __initdata = { | |
45 | /* MMC */ | |
46 | GPIO32_MMC_CLK, | |
47 | GPIO112_MMC_CMD, | |
48 | GPIO92_MMC_DAT_0, | |
49 | GPIO109_MMC_DAT_1, | |
50 | GPIO110_MMC_DAT_2, | |
51 | GPIO111_MMC_DAT_3, | |
52 | /* USB */ | |
53 | GPIO88_USBH1_PWR, | |
54 | GPIO89_USBH1_PEN, | |
55 | /* PWM0 */ | |
56 | GPIO16_PWM0_OUT, | |
6f584cfa EM |
57 | |
58 | /* I2C */ | |
59 | GPIO117_I2C_SCL, | |
60 | GPIO118_I2C_SDA, | |
c11b6a42 EM |
61 | |
62 | /* AC97 */ | |
63 | GPIO28_AC97_BITCLK, | |
64 | GPIO29_AC97_SDATA_IN_0, | |
65 | GPIO30_AC97_SDATA_OUT, | |
66 | GPIO31_AC97_SYNC, | |
6a566fbb | 67 | }; |
c0f7edb3 | 68 | |
b298322b SH |
69 | static void __iomem *pcm990_cpld_base; |
70 | ||
71 | static u8 pcm990_cpld_readb(unsigned int reg) | |
72 | { | |
73 | return readb(pcm990_cpld_base + reg); | |
74 | } | |
75 | ||
76 | static void pcm990_cpld_writeb(u8 value, unsigned int reg) | |
77 | { | |
78 | writeb(value, pcm990_cpld_base + reg); | |
79 | } | |
80 | ||
c0f7edb3 GL |
81 | /* |
82 | * pcm990_lcd_power - control power supply to the LCD | |
83 | * @on: 0 = switch off, 1 = switch on | |
84 | * | |
85 | * Called by the pxafb driver | |
86 | */ | |
87 | #ifndef CONFIG_PCM990_DISPLAY_NONE | |
88 | static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var) | |
89 | { | |
90 | if (on) { | |
91 | /* enable LCD-Latches | |
92 | * power on LCD | |
93 | */ | |
b298322b SH |
94 | pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON, |
95 | PCM990_CTRL_REG3); | |
c0f7edb3 GL |
96 | } else { |
97 | /* disable LCD-Latches | |
98 | * power off LCD | |
99 | */ | |
b298322b | 100 | pcm990_cpld_writeb(0, PCM990_CTRL_REG3); |
c0f7edb3 GL |
101 | } |
102 | } | |
103 | #endif | |
104 | ||
105 | #if defined(CONFIG_PCM990_DISPLAY_SHARP) | |
106 | static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = { | |
107 | .pixclock = 28000, | |
108 | .xres = 640, | |
109 | .yres = 480, | |
110 | .bpp = 16, | |
111 | .hsync_len = 20, | |
112 | .left_margin = 103, | |
113 | .right_margin = 47, | |
114 | .vsync_len = 6, | |
115 | .upper_margin = 28, | |
116 | .lower_margin = 5, | |
117 | .sync = 0, | |
118 | .cmap_greyscale = 0, | |
119 | }; | |
120 | ||
121 | static struct pxafb_mach_info pcm990_fbinfo __initdata = { | |
122 | .modes = &fb_info_sharp_lq084v1dg21, | |
123 | .num_modes = 1, | |
9587319b | 124 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, |
c0f7edb3 GL |
125 | .pxafb_lcd_power = pcm990_lcd_power, |
126 | }; | |
127 | #elif defined(CONFIG_PCM990_DISPLAY_NEC) | |
128 | struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = { | |
129 | .pixclock = 39720, | |
130 | .xres = 640, | |
131 | .yres = 480, | |
132 | .bpp = 16, | |
133 | .hsync_len = 32, | |
134 | .left_margin = 16, | |
135 | .right_margin = 48, | |
136 | .vsync_len = 2, | |
137 | .upper_margin = 12, | |
138 | .lower_margin = 17, | |
139 | .sync = 0, | |
140 | .cmap_greyscale = 0, | |
141 | }; | |
142 | ||
143 | static struct pxafb_mach_info pcm990_fbinfo __initdata = { | |
144 | .modes = &fb_info_nec_nl6448bc20_18d, | |
145 | .num_modes = 1, | |
9587319b | 146 | .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, |
c0f7edb3 GL |
147 | .pxafb_lcd_power = pcm990_lcd_power, |
148 | }; | |
149 | #endif | |
150 | ||
151 | static struct platform_pwm_backlight_data pcm990_backlight_data = { | |
152 | .pwm_id = 0, | |
153 | .max_brightness = 1023, | |
154 | .dft_brightness = 1023, | |
155 | .pwm_period_ns = 78770, | |
156 | }; | |
157 | ||
158 | static struct platform_device pcm990_backlight_device = { | |
159 | .name = "pwm-backlight", | |
160 | .dev = { | |
161 | .parent = &pxa27x_device_pwm0.dev, | |
162 | .platform_data = &pcm990_backlight_data, | |
163 | }, | |
164 | }; | |
2e927b76 RS |
165 | |
166 | /* | |
c0f7edb3 | 167 | * The PCM-990 development baseboard uses PCM-027's hardware in the |
2e927b76 RS |
168 | * following way: |
169 | * | |
170 | * - LCD support is in use | |
171 | * - GPIO16 is output for back light on/off with PWM | |
172 | * - GPIO58 ... GPIO73 are outputs for display data | |
173 | * - GPIO74 is output output for LCDFCLK | |
174 | * - GPIO75 is output for LCDLCLK | |
175 | * - GPIO76 is output for LCDPCLK | |
176 | * - GPIO77 is output for LCDBIAS | |
177 | * - MMC support is in use | |
178 | * - GPIO32 is output for MMCCLK | |
179 | * - GPIO92 is MMDAT0 | |
180 | * - GPIO109 is MMDAT1 | |
181 | * - GPIO110 is MMCS0 | |
182 | * - GPIO111 is MMCS1 | |
183 | * - GPIO112 is MMCMD | |
184 | * - IDE/CF card is in use | |
185 | * - GPIO48 is output /POE | |
186 | * - GPIO49 is output /PWE | |
187 | * - GPIO50 is output /PIOR | |
188 | * - GPIO51 is output /PIOW | |
189 | * - GPIO54 is output /PCE2 | |
190 | * - GPIO55 is output /PREG | |
191 | * - GPIO56 is input /PWAIT | |
192 | * - GPIO57 is output /PIOS16 | |
193 | * - GPIO79 is output PSKTSEL | |
194 | * - GPIO85 is output /PCE1 | |
195 | * - FFUART is in use | |
196 | * - GPIO34 is input FFRXD | |
197 | * - GPIO35 is input FFCTS | |
198 | * - GPIO36 is input FFDCD | |
199 | * - GPIO37 is input FFDSR | |
200 | * - GPIO38 is input FFRI | |
201 | * - GPIO39 is output FFTXD | |
202 | * - GPIO40 is output FFDTR | |
203 | * - GPIO41 is output FFRTS | |
204 | * - BTUART is in use | |
205 | * - GPIO42 is input BTRXD | |
206 | * - GPIO43 is output BTTXD | |
207 | * - GPIO44 is input BTCTS | |
208 | * - GPIO45 is output BTRTS | |
209 | * - IRUART is in use | |
210 | * - GPIO46 is input STDRXD | |
211 | * - GPIO47 is output STDTXD | |
212 | * - AC97 is in use*) | |
213 | * - GPIO28 is input AC97CLK | |
214 | * - GPIO29 is input AC97DatIn | |
215 | * - GPIO30 is output AC97DatO | |
216 | * - GPIO31 is output AC97SYNC | |
217 | * - GPIO113 is output AC97_RESET | |
218 | * - SSP is in use | |
219 | * - GPIO23 is output SSPSCLK | |
220 | * - GPIO24 is output chip select to Max7301 | |
221 | * - GPIO25 is output SSPTXD | |
222 | * - GPIO26 is input SSPRXD | |
223 | * - GPIO27 is input for Max7301 IRQ | |
224 | * - GPIO53 is input SSPSYSCLK | |
225 | * - SSP3 is in use | |
226 | * - GPIO81 is output SSPTXD3 | |
227 | * - GPIO82 is input SSPRXD3 | |
228 | * - GPIO83 is output SSPSFRM | |
229 | * - GPIO84 is output SSPCLK3 | |
230 | * | |
231 | * Otherwise claimed GPIOs: | |
232 | * GPIO1 -> IRQ from user switch | |
233 | * GPIO9 -> IRQ from power management | |
234 | * GPIO10 -> IRQ from WML9712 AC97 controller | |
235 | * GPIO11 -> IRQ from IDE controller | |
236 | * GPIO12 -> IRQ from CF controller | |
237 | * GPIO13 -> IRQ from CF controller | |
238 | * GPIO14 -> GPIO free | |
239 | * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path) | |
240 | * GPIO19 -> GPIO free | |
241 | * GPIO20 -> /SDCS2 | |
242 | * GPIO21 -> /CS3 PC card socket select | |
243 | * GPIO33 -> /CS5 network controller select | |
244 | * GPIO78 -> /CS2 (16 bit wide data path) | |
245 | * GPIO80 -> /CS4 (16 bit wide data path) | |
246 | * GPIO86 -> GPIO free | |
247 | * GPIO87 -> GPIO free | |
248 | * GPIO90 -> LED0 on CPU module | |
249 | * GPIO91 -> LED1 on CPI module | |
250 | * GPIO117 -> SCL | |
251 | * GPIO118 -> SDA | |
252 | */ | |
253 | ||
254 | static unsigned long pcm990_irq_enabled; | |
255 | ||
a3f4c927 | 256 | static void pcm990_mask_ack_irq(struct irq_data *d) |
2e927b76 | 257 | { |
a3f4c927 | 258 | int pcm990_irq = (d->irq - PCM027_IRQ(0)); |
b298322b SH |
259 | |
260 | pcm990_irq_enabled &= ~(1 << pcm990_irq); | |
261 | ||
262 | pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA); | |
2e927b76 RS |
263 | } |
264 | ||
a3f4c927 | 265 | static void pcm990_unmask_irq(struct irq_data *d) |
2e927b76 | 266 | { |
a3f4c927 | 267 | int pcm990_irq = (d->irq - PCM027_IRQ(0)); |
b298322b SH |
268 | u8 val; |
269 | ||
2e927b76 | 270 | /* the irq can be acknowledged only if deasserted, so it's done here */ |
b298322b SH |
271 | |
272 | pcm990_irq_enabled |= (1 << pcm990_irq); | |
273 | ||
274 | val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR); | |
275 | val |= 1 << pcm990_irq; | |
276 | pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR); | |
277 | ||
278 | pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA); | |
2e927b76 RS |
279 | } |
280 | ||
281 | static struct irq_chip pcm990_irq_chip = { | |
a3f4c927 LB |
282 | .irq_mask_ack = pcm990_mask_ack_irq, |
283 | .irq_unmask = pcm990_unmask_irq, | |
2e927b76 RS |
284 | }; |
285 | ||
286 | static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) | |
287 | { | |
b298322b SH |
288 | unsigned long pending; |
289 | ||
290 | pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR); | |
291 | pending &= pcm990_irq_enabled; | |
2e927b76 RS |
292 | |
293 | do { | |
a3f4c927 LB |
294 | /* clear our parent IRQ */ |
295 | desc->irq_data.chip->irq_ack(&desc->irq_data); | |
2e927b76 RS |
296 | if (likely(pending)) { |
297 | irq = PCM027_IRQ(0) + __ffs(pending); | |
d8aa0251 | 298 | generic_handle_irq(irq); |
2e927b76 | 299 | } |
b298322b SH |
300 | pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR); |
301 | pending &= pcm990_irq_enabled; | |
2e927b76 RS |
302 | } while (pending); |
303 | } | |
304 | ||
305 | static void __init pcm990_init_irq(void) | |
306 | { | |
307 | int irq; | |
308 | ||
309 | /* setup extra PCM990 irqs */ | |
310 | for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) { | |
f38c02f3 TG |
311 | irq_set_chip_and_handler(irq, &pcm990_irq_chip, |
312 | handle_level_irq); | |
2e927b76 RS |
313 | set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
314 | } | |
315 | ||
b298322b SH |
316 | /* disable all Interrupts */ |
317 | pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA); | |
318 | pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR); | |
2e927b76 | 319 | |
6845664a TG |
320 | irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); |
321 | irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); | |
2e927b76 RS |
322 | } |
323 | ||
324 | static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, | |
325 | void *data) | |
326 | { | |
327 | int err; | |
328 | ||
2e927b76 RS |
329 | err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED, |
330 | "MMC card detect", data); | |
331 | if (err) | |
332 | printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC " | |
333 | "card detect IRQ\n"); | |
334 | ||
335 | return err; | |
336 | } | |
337 | ||
338 | static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) | |
339 | { | |
340 | struct pxamci_platform_data *p_d = dev->platform_data; | |
b298322b SH |
341 | u8 val; |
342 | ||
343 | val = pcm990_cpld_readb(PCM990_CTRL_REG5); | |
2e927b76 RS |
344 | |
345 | if ((1 << vdd) & p_d->ocr_mask) | |
b298322b | 346 | val |= PCM990_CTRL_MMC2PWR; |
2e927b76 | 347 | else |
b298322b SH |
348 | val &= ~PCM990_CTRL_MMC2PWR; |
349 | ||
350 | pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5); | |
2e927b76 RS |
351 | } |
352 | ||
353 | static void pcm990_mci_exit(struct device *dev, void *data) | |
354 | { | |
355 | free_irq(PCM027_MMCDET_IRQ, data); | |
356 | } | |
357 | ||
358 | #define MSECS_PER_JIFFY (1000/HZ) | |
359 | ||
360 | static struct pxamci_platform_data pcm990_mci_platform_data = { | |
f97cab28 | 361 | .detect_delay_ms = 250, |
7a648256 RJ |
362 | .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
363 | .init = pcm990_mci_init, | |
364 | .setpower = pcm990_mci_setpower, | |
365 | .exit = pcm990_mci_exit, | |
366 | .gpio_card_detect = -1, | |
367 | .gpio_card_ro = -1, | |
368 | .gpio_power = -1, | |
2e927b76 RS |
369 | }; |
370 | ||
2e927b76 RS |
371 | static struct pxaohci_platform_data pcm990_ohci_platform_data = { |
372 | .port_mode = PMM_PERPORT_MODE, | |
097b5334 EM |
373 | .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, |
374 | .power_on_delay = 10, | |
2e927b76 RS |
375 | }; |
376 | ||
58762e77 GL |
377 | /* |
378 | * PXA27x Camera specific stuff | |
379 | */ | |
380 | #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) | |
6a566fbb GL |
381 | static unsigned long pcm990_camera_pin_config[] = { |
382 | /* CIF */ | |
383 | GPIO98_CIF_DD_0, | |
384 | GPIO105_CIF_DD_1, | |
385 | GPIO104_CIF_DD_2, | |
386 | GPIO103_CIF_DD_3, | |
387 | GPIO95_CIF_DD_4, | |
388 | GPIO94_CIF_DD_5, | |
389 | GPIO93_CIF_DD_6, | |
390 | GPIO108_CIF_DD_7, | |
391 | GPIO107_CIF_DD_8, | |
392 | GPIO106_CIF_DD_9, | |
393 | GPIO42_CIF_MCLK, | |
394 | GPIO45_CIF_PCLK, | |
395 | GPIO43_CIF_FV, | |
396 | GPIO44_CIF_LV, | |
397 | }; | |
398 | ||
58762e77 GL |
399 | /* |
400 | * CICR4: PCLK_EN: Pixel clock is supplied by the sensor | |
401 | * MCLK_EN: Master clock is generated by PXA | |
402 | * PCP: Data sampled on the falling edge of pixel clock | |
403 | */ | |
404 | struct pxacamera_platform_data pcm990_pxacamera_platform_data = { | |
58762e77 GL |
405 | .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 | |
406 | PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/, | |
407 | .mclk_10khz = 1000, | |
408 | }; | |
409 | ||
410 | #include <linux/i2c/pca953x.h> | |
411 | ||
412 | static struct pca953x_platform_data pca9536_data = { | |
1a8d5fab | 413 | .gpio_base = PXA_NR_BUILTIN_GPIO, |
58762e77 GL |
414 | }; |
415 | ||
594bb46d | 416 | static int gpio_bus_switch = -EINVAL; |
d75b1dcc SH |
417 | |
418 | static int pcm990_camera_set_bus_param(struct soc_camera_link *link, | |
594bb46d | 419 | unsigned long flags) |
d75b1dcc | 420 | { |
594bb46d | 421 | if (gpio_bus_switch < 0) { |
d75b1dcc SH |
422 | if (flags == SOCAM_DATAWIDTH_10) |
423 | return 0; | |
424 | else | |
425 | return -EINVAL; | |
426 | } | |
427 | ||
428 | if (flags & SOCAM_DATAWIDTH_8) | |
fae00288 | 429 | gpio_set_value_cansleep(gpio_bus_switch, 1); |
d75b1dcc | 430 | else |
fae00288 | 431 | gpio_set_value_cansleep(gpio_bus_switch, 0); |
d75b1dcc SH |
432 | |
433 | return 0; | |
434 | } | |
435 | ||
436 | static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) | |
437 | { | |
438 | int ret; | |
439 | ||
594bb46d | 440 | if (gpio_bus_switch < 0) { |
1a8d5fab | 441 | ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera"); |
d75b1dcc | 442 | if (!ret) { |
1a8d5fab | 443 | gpio_bus_switch = PXA_NR_BUILTIN_GPIO; |
d75b1dcc | 444 | gpio_direction_output(gpio_bus_switch, 0); |
594bb46d | 445 | } |
58762e77 | 446 | } |
d75b1dcc | 447 | |
594bb46d | 448 | if (gpio_bus_switch >= 0) |
d75b1dcc SH |
449 | return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10; |
450 | else | |
451 | return SOCAM_DATAWIDTH_10; | |
452 | } | |
453 | ||
594bb46d GL |
454 | static void pcm990_camera_free_bus(struct soc_camera_link *link) |
455 | { | |
456 | if (gpio_bus_switch < 0) | |
457 | return; | |
458 | ||
459 | gpio_free(gpio_bus_switch); | |
460 | gpio_bus_switch = -EINVAL; | |
461 | } | |
462 | ||
58762e77 GL |
463 | /* Board I2C devices. */ |
464 | static struct i2c_board_info __initdata pcm990_i2c_devices[] = { | |
465 | { | |
466 | /* Must initialize before the camera(s) */ | |
3760f736 | 467 | I2C_BOARD_INFO("pca9536", 0x41), |
58762e77 | 468 | .platform_data = &pca9536_data, |
4a3d3abe GL |
469 | }, |
470 | }; | |
471 | ||
b6f50b49 AG |
472 | static struct mt9v022_platform_data mt9v022_pdata = { |
473 | .y_skip_top = 1, | |
474 | }; | |
475 | ||
4a3d3abe GL |
476 | static struct i2c_board_info pcm990_camera_i2c[] = { |
477 | { | |
58762e77 | 478 | I2C_BOARD_INFO("mt9v022", 0x48), |
58762e77 GL |
479 | }, { |
480 | I2C_BOARD_INFO("mt9m001", 0x5d), | |
4a3d3abe GL |
481 | }, |
482 | }; | |
483 | ||
484 | static struct soc_camera_link iclink[] = { | |
485 | { | |
486 | .bus_id = 0, /* Must match with the camera ID */ | |
487 | .board_info = &pcm990_camera_i2c[0], | |
b6f50b49 | 488 | .priv = &mt9v022_pdata, |
4a3d3abe GL |
489 | .i2c_adapter_id = 0, |
490 | .query_bus_param = pcm990_camera_query_bus_param, | |
491 | .set_bus_param = pcm990_camera_set_bus_param, | |
492 | .free_bus = pcm990_camera_free_bus, | |
4a3d3abe GL |
493 | }, { |
494 | .bus_id = 0, /* Must match with the camera ID */ | |
495 | .board_info = &pcm990_camera_i2c[1], | |
496 | .i2c_adapter_id = 0, | |
497 | .query_bus_param = pcm990_camera_query_bus_param, | |
498 | .set_bus_param = pcm990_camera_set_bus_param, | |
499 | .free_bus = pcm990_camera_free_bus, | |
4a3d3abe GL |
500 | }, |
501 | }; | |
502 | ||
503 | static struct platform_device pcm990_camera[] = { | |
504 | { | |
505 | .name = "soc-camera-pdrv", | |
506 | .id = 0, | |
507 | .dev = { | |
508 | .platform_data = &iclink[0], | |
509 | }, | |
510 | }, { | |
511 | .name = "soc-camera-pdrv", | |
512 | .id = 1, | |
513 | .dev = { | |
514 | .platform_data = &iclink[1], | |
515 | }, | |
58762e77 GL |
516 | }, |
517 | }; | |
518 | #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ | |
519 | ||
2e927b76 RS |
520 | /* |
521 | * system init for baseboard usage. Will be called by pcm027 init. | |
522 | * | |
523 | * Add platform devices present on this baseboard and init | |
524 | * them from CPU side as far as required to use them later on | |
525 | */ | |
526 | void __init pcm990_baseboard_init(void) | |
527 | { | |
6a566fbb GL |
528 | pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config)); |
529 | ||
b298322b SH |
530 | pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE); |
531 | if (!pcm990_cpld_base) { | |
532 | pr_err("pcm990: failed to ioremap cpld\n"); | |
533 | return; | |
534 | } | |
2e927b76 RS |
535 | |
536 | /* register CPLD's IRQ controller */ | |
537 | pcm990_init_irq(); | |
538 | ||
c0f7edb3 | 539 | #ifndef CONFIG_PCM990_DISPLAY_NONE |
4321e1a1 | 540 | pxa_set_fb_info(NULL, &pcm990_fbinfo); |
c0f7edb3 | 541 | #endif |
c0f7edb3 GL |
542 | platform_device_register(&pcm990_backlight_device); |
543 | ||
2e927b76 RS |
544 | /* MMC */ |
545 | pxa_set_mci_info(&pcm990_mci_platform_data); | |
546 | ||
547 | /* USB host */ | |
548 | pxa_set_ohci_info(&pcm990_ohci_platform_data); | |
549 | ||
58762e77 | 550 | pxa_set_i2c_info(NULL); |
9f19d638 | 551 | pxa_set_ac97_info(NULL); |
58762e77 GL |
552 | |
553 | #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) | |
0e851907 | 554 | pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config)); |
58762e77 GL |
555 | pxa_set_camera_info(&pcm990_pxacamera_platform_data); |
556 | ||
6a566fbb | 557 | i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices)); |
4a3d3abe GL |
558 | |
559 | platform_device_register(&pcm990_camera[0]); | |
560 | platform_device_register(&pcm990_camera[1]); | |
58762e77 GL |
561 | #endif |
562 | ||
6a566fbb | 563 | printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n"); |
2e927b76 | 564 | } |