[deliverable/linux.git] / arch / arm / mach-pxa / poodle.c

/*
 * linux/arch/arm/mach-pxa/poodle.c
 *
 *  Support for the SHARP Poodle Board.
 *
 * Based on:
 *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 *
 * Change Log
 *  12-Dec-2002 Sharp Corporation for Poodle
 *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>

#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/system.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
#include <mach/sharpsl.h>
#include <mach/ssp.h>

#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
#include <asm/mach/sharpsl_param.h>

#include "generic.h"
#include "devices.h"
#include "sharpsl.h"

static struct resource poodle_scoop_resources[] = {
	[0] = {
		.start		= 0x10800000,
		.end		= 0x10800fff,
		.flags		= IORESOURCE_MEM,
	},
};

static struct scoop_config poodle_scoop_setup = {
	.io_dir		= POODLE_SCOOP_IO_DIR,
	.io_out		= POODLE_SCOOP_IO_OUT,
};

struct platform_device poodle_scoop_device = {
	.name		= "sharp-scoop",
	.id		= -1,
	.dev		= {
		.platform_data	= &poodle_scoop_setup,
	},
	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
	.resource	= poodle_scoop_resources,
};

static void poodle_pcmcia_init(void)
{
	/* Setup default state of GPIO outputs
	   before we enable them as outputs. */
	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
		GPIO_bit(GPIO53_nPCE_2);

	pxa_gpio_mode(GPIO48_nPOE_MD);
	pxa_gpio_mode(GPIO49_nPWE_MD);
	pxa_gpio_mode(GPIO50_nPIOR_MD);
	pxa_gpio_mode(GPIO51_nPIOW_MD);
	pxa_gpio_mode(GPIO55_nPREG_MD);
	pxa_gpio_mode(GPIO56_nPWAIT_MD);
	pxa_gpio_mode(GPIO57_nIOIS16_MD);
	pxa_gpio_mode(GPIO52_nPCE_1_MD);
	pxa_gpio_mode(GPIO53_nPCE_2_MD);
	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}

static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
	.dev        = &poodle_scoop_device.dev,
	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
	.cd_irq_str = "PCMCIA0 CD",
},
};

static struct scoop_pcmcia_config poodle_pcmcia_config = {
	.devs         = &poodle_pcmcia_scoop[0],
	.num_devs     = 1,
	.pcmcia_init  = poodle_pcmcia_init,
};

EXPORT_SYMBOL(poodle_scoop_device);


/* LoCoMo device */
static struct resource locomo_resources[] = {
	[0] = {
		.start		= 0x10000000,
		.end		= 0x10001fff,
		.flags		= IORESOURCE_MEM,
	},
	[1] = {
		.start		= IRQ_GPIO(10),
		.end		= IRQ_GPIO(10),
		.flags		= IORESOURCE_IRQ,
	},
};

struct platform_device poodle_locomo_device = {
	.name		= "locomo",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(locomo_resources),
	.resource	= locomo_resources,
};

EXPORT_SYMBOL(poodle_locomo_device);

/*
 * Poodle SSP Device
 */

struct platform_device poodle_ssp_device = {
	.name		= "corgi-ssp",
	.id		= -1,
};

struct corgissp_machinfo poodle_ssp_machinfo = {
	.port		= 1,
	.cs_lcdcon	= -1,
	.cs_ads7846	= -1,
	.cs_max1111	= -1,
	.clk_lcdcon	= 2,
	.clk_ads7846	= 36,
	.clk_max1111	= 2,
};


/*
 * Poodle Touch Screen Device
 */
static struct resource poodlets_resources[] = {
	[0] = {
		.start		= POODLE_IRQ_GPIO_TP_INT,
		.end		= POODLE_IRQ_GPIO_TP_INT,
		.flags		= IORESOURCE_IRQ,
	},
};

static unsigned long poodle_get_hsync_invperiod(void)
{
	return 0;
}

static void poodle_null_hsync(void)
{
}

static struct corgits_machinfo  poodle_ts_machinfo = {
	.get_hsync_invperiod	= poodle_get_hsync_invperiod,
	.put_hsync       	= poodle_null_hsync,
	.wait_hsync      	= poodle_null_hsync,
};

static struct platform_device poodle_ts_device = {
	.name		= "corgi-ts",
	.dev		= {
		.platform_data	= &poodle_ts_machinfo,
	},
	.id		= -1,
	.num_resources	= ARRAY_SIZE(poodlets_resources),
	.resource	= poodlets_resources,
};


/*
 * MMC/SD Device
 *
 * The card detect interrupt isn't debounced so we delay it by 250ms
 * to give the card a chance to fully insert/eject.
 */
static struct pxamci_platform_data poodle_mci_platform_data;

static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
{
	int err;

	/* setup GPIO for PXA25x MMC controller	*/
	pxa_gpio_mode(GPIO6_MMCCLK_MD);
	pxa_gpio_mode(GPIO8_MMCCS0_MD);
	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
	pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
	pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
	pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);

	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);

	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
			  "MMC card detect", data);
	if (err)
		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");

	return err;
}

static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
	struct pxamci_platform_data* p_d = dev->platform_data;

	if (( 1 << vdd) & p_d->ocr_mask) {
		GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
		mdelay(2);
		GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
	} else {
		GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
		GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
	}
}

static int poodle_mci_get_ro(struct device *dev)
{
	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
}


static void poodle_mci_exit(struct device *dev, void *data)
{
	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
}

static struct pxamci_platform_data poodle_mci_platform_data = {
	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
	.init 		= poodle_mci_init,
	.get_ro		= poodle_mci_get_ro,
	.setpower 	= poodle_mci_setpower,
	.exit		= poodle_mci_exit,
};


/*
 * Irda
 */
static void poodle_irda_transceiver_mode(struct device *dev, int mode)
{
	if (mode & IR_OFF) {
		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
	} else {
		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
	}
	pxa2xx_transceiver_mode(dev, mode);
}

static struct pxaficp_platform_data poodle_ficp_platform_data = {
	.transceiver_cap  = IR_SIRMODE | IR_OFF,
	.transceiver_mode = poodle_irda_transceiver_mode,
};


/*
 * USB Device Controller
 */
static void poodle_udc_command(int cmd)
{
	switch(cmd)	{
	case PXA2XX_UDC_CMD_CONNECT:
		GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
		break;
	case PXA2XX_UDC_CMD_DISCONNECT:
		GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
		break;
	}
}

static struct pxa2xx_udc_mach_info udc_info __initdata = {
	/* no connect GPIO; poodle can't tell connection status */
	.udc_command		= poodle_udc_command,
};


/* PXAFB device */
static struct pxafb_mode_info poodle_fb_mode = {
	.pixclock	= 144700,
	.xres		= 320,
	.yres		= 240,
	.bpp		= 16,
	.hsync_len	= 7,
	.left_margin	= 11,
	.right_margin	= 30,
	.vsync_len	= 2,
	.upper_margin	= 2,
	.lower_margin	= 0,
	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
};

static struct pxafb_mach_info poodle_fb_info = {
	.modes		= &poodle_fb_mode,
	.num_modes	= 1,
	.lccr0		= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
	.lccr3		= 0,
};

static struct platform_device *devices[] __initdata = {
	&poodle_locomo_device,
	&poodle_scoop_device,
	&poodle_ssp_device,
	&poodle_ts_device,
};

static void poodle_poweroff(void)
{
	arm_machine_restart('h');
}

static void poodle_restart(char mode)
{
	arm_machine_restart('h');
}

static void __init poodle_init(void)
{
	int ret = 0;

	pm_power_off = poodle_poweroff;
	arm_pm_restart = poodle_restart;

	/* setup sleep mode values */
	PWER  = 0x00000002;
	PFER  = 0x00000000;
	PRER  = 0x00000002;
	PGSR0 = 0x00008000;
	PGSR1 = 0x003F0202;
	PGSR2 = 0x0001C000;
	PCFR |= PCFR_OPDE;

	/* cpu initialize */
	/* Pgsr Register */
  	PGSR0 = 0x0146dd80;
  	PGSR1 = 0x03bf0890;
  	PGSR2 = 0x0001c000;

	/* Alternate Register */
  	GAFR0_L = 0x01001000;
  	GAFR0_U = 0x591a8010;
  	GAFR1_L = 0x900a8451;
  	GAFR1_U = 0xaaa5aaaa;
  	GAFR2_L = 0x8aaaaaaa;
  	GAFR2_U = 0x00000002;

	/* Direction Register */
  	GPDR0 = 0xd3f0904c;
  	GPDR1 = 0xfcffb7d3;
  	GPDR2 = 0x0001ffff;

	/* Output Register */
  	GPCR0 = 0x00000000;
  	GPCR1 = 0x00000000;
  	GPCR2 = 0x00000000;

  	GPSR0 = 0x00400000;
  	GPSR1 = 0x00000000;
        GPSR2 = 0x00000000;

	platform_scoop_config = &poodle_pcmcia_config;
	corgi_ssp_set_machinfo(&poodle_ssp_machinfo);

	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
	if (ret)
		pr_warning("poodle: Unable to register LoCoMo device\n");

	set_pxa_fb_parent(&poodle_locomo_device.dev);
	set_pxa_fb_info(&poodle_fb_info);
	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
	pxa_set_udc_info(&udc_info);
	pxa_set_mci_info(&poodle_mci_platform_data);
	pxa_set_ficp_info(&poodle_ficp_platform_data);
	pxa_set_i2c_info(NULL);
}

static void __init fixup_poodle(struct machine_desc *desc,
		struct tag *tags, char **cmdline, struct meminfo *mi)
{
	sharpsl_save_param();
	mi->nr_banks=1;
	mi->bank[0].start = 0xa0000000;
	mi->bank[0].node = 0;
	mi->bank[0].size = (32*1024*1024);
}

MACHINE_START(POODLE, "SHARP Poodle")
	.phys_io	= 0x40000000,
	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
	.fixup		= fixup_poodle,
	.map_io		= pxa_map_io,
	.init_irq	= pxa25x_init_irq,
	.timer		= &pxa_timer,
	.init_machine	= poodle_init,
MACHINE_END
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/arch/arm/mach-pxa/poodle.c
	3	*
	4	* Support for the SHARP Poodle Board.
	5	*
	6	* Based on:
	7	* linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*
	13	* Change Log
	14	* 12-Dec-2002 Sharp Corporation for Poodle
	15	* John Lenz <lenz@cs.wisc.edu> updates to 2.6
	16	*/
	17	#include <linux/kernel.h>
	18	#include <linux/init.h>
d052d1be	19	#include <linux/platform_device.h>
1da177e4	20	#include <linux/fb.h>
74617fb6	21	#include <linux/pm.h>
88660351	22	#include <linux/delay.h>
1da177e4	23
a09e64fb	24	#include <mach/hardware.h>
1da177e4 LT	25	#include <asm/mach-types.h>
	26	#include <asm/irq.h>
	27	#include <asm/setup.h>
74617fb6	28	#include <asm/system.h>
1da177e4 LT	29
	30	#include <asm/mach/arch.h>
	31	#include <asm/mach/map.h>
	32	#include <asm/mach/irq.h>
	33
a09e64fb RK	34	#include <mach/pxa-regs.h>
	35	#include <mach/pxa2xx-regs.h>
	36	#include <mach/pxa2xx-gpio.h>
	37	#include <mach/mmc.h>
	38	#include <mach/udc.h>
f8787fdc	39	#include <mach/i2c.h>
a09e64fb RK	40	#include <mach/irda.h>
	41	#include <mach/poodle.h>
	42	#include <mach/pxafb.h>
	43	#include <mach/sharpsl.h>
	44	#include <mach/ssp.h>
1da177e4 LT	45
	46	#include <asm/hardware/scoop.h>
	47	#include <asm/hardware/locomo.h>
	48	#include <asm/mach/sharpsl_param.h>
	49
	50	#include "generic.h"
46c41e62	51	#include "devices.h"
faed5684	52	#include "sharpsl.h"
1da177e4 LT	53
	54	static struct resource poodle_scoop_resources[] = {
	55	[0] = {
	56	.start = 0x10800000,
	57	.end = 0x10800fff,
	58	.flags = IORESOURCE_MEM,
	59	},
	60	};
	61
	62	static struct scoop_config poodle_scoop_setup = {
	63	.io_dir = POODLE_SCOOP_IO_DIR,
	64	.io_out = POODLE_SCOOP_IO_OUT,
	65	};
	66
	67	struct platform_device poodle_scoop_device = {
	68	.name = "sharp-scoop",
	69	.id = -1,
	70	.dev = {
	71	.platform_data = &poodle_scoop_setup,
	72	},
	73	.num_resources = ARRAY_SIZE(poodle_scoop_resources),
	74	.resource = poodle_scoop_resources,
	75	};
	76
a63ae442 RP	77	static void poodle_pcmcia_init(void)
	78	{
	79	/* Setup default state of GPIO outputs
	80	before we enable them as outputs. */
	81	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) \|
	82	GPIO_bit(GPIO49_nPWE) \| GPIO_bit(GPIO50_nPIOR) \|
	83	GPIO_bit(GPIO51_nPIOW) \| GPIO_bit(GPIO52_nPCE_1) \|
	84	GPIO_bit(GPIO53_nPCE_2);
	85
	86	pxa_gpio_mode(GPIO48_nPOE_MD);
	87	pxa_gpio_mode(GPIO49_nPWE_MD);
	88	pxa_gpio_mode(GPIO50_nPIOR_MD);
	89	pxa_gpio_mode(GPIO51_nPIOW_MD);
	90	pxa_gpio_mode(GPIO55_nPREG_MD);
	91	pxa_gpio_mode(GPIO56_nPWAIT_MD);
	92	pxa_gpio_mode(GPIO57_nIOIS16_MD);
	93	pxa_gpio_mode(GPIO52_nPCE_1_MD);
	94	pxa_gpio_mode(GPIO53_nPCE_2_MD);
	95	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
	96	}
	97
0ce7625f RP	98	static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
	99	{
	100	.dev = &poodle_scoop_device.dev,
	101	.irq = POODLE_IRQ_GPIO_CF_IRQ,
	102	.cd_irq = POODLE_IRQ_GPIO_CF_CD,
	103	.cd_irq_str = "PCMCIA0 CD",
	104	},
	105	};
	106
a63ae442 RP	107	static struct scoop_pcmcia_config poodle_pcmcia_config = {
	108	.devs = &poodle_pcmcia_scoop[0],
	109	.num_devs = 1,
	110	.pcmcia_init = poodle_pcmcia_init,
	111	};
	112
	113	EXPORT_SYMBOL(poodle_scoop_device);
	114
1da177e4 LT	115
	116	/* LoCoMo device */
	117	static struct resource locomo_resources[] = {
	118	[0] = {
	119	.start = 0x10000000,
	120	.end = 0x10001fff,
	121	.flags = IORESOURCE_MEM,
	122	},
	123	[1] = {
	124	.start = IRQ_GPIO(10),
	125	.end = IRQ_GPIO(10),
	126	.flags = IORESOURCE_IRQ,
	127	},
	128	};
	129
faed5684	130	struct platform_device poodle_locomo_device = {
1da177e4 LT	131	.name = "locomo",
	132	.id = 0,
	133	.num_resources = ARRAY_SIZE(locomo_resources),
	134	.resource = locomo_resources,
	135	};
	136
faed5684 RP	137	EXPORT_SYMBOL(poodle_locomo_device);
	138
	139	/*
	140	* Poodle SSP Device
	141	*/
	142
	143	struct platform_device poodle_ssp_device = {
	144	.name = "corgi-ssp",
	145	.id = -1,
	146	};
	147
	148	struct corgissp_machinfo poodle_ssp_machinfo = {
	149	.port = 1,
	150	.cs_lcdcon = -1,
	151	.cs_ads7846 = -1,
	152	.cs_max1111 = -1,
	153	.clk_lcdcon = 2,
	154	.clk_ads7846 = 36,
	155	.clk_max1111 = 2,
	156	};
	157
	158
	159	/*
	160	* Poodle Touch Screen Device
	161	*/
	162	static struct resource poodlets_resources[] = {
	163	[0] = {
	164	.start = POODLE_IRQ_GPIO_TP_INT,
	165	.end = POODLE_IRQ_GPIO_TP_INT,
	166	.flags = IORESOURCE_IRQ,
	167	},
	168	};
	169
6a0bd09d	170	static unsigned long poodle_get_hsync_invperiod(void)
faed5684 RP	171	{
	172	return 0;
	173	}
	174
	175	static void poodle_null_hsync(void)
	176	{
	177	}
	178
	179	static struct corgits_machinfo poodle_ts_machinfo = {
6a0bd09d	180	.get_hsync_invperiod = poodle_get_hsync_invperiod,
	181	.put_hsync = poodle_null_hsync,
	182	.wait_hsync = poodle_null_hsync,
faed5684 RP	183	};
	184
	185	static struct platform_device poodle_ts_device = {
	186	.name = "corgi-ts",
	187	.dev = {
	188	.platform_data = &poodle_ts_machinfo,
	189	},
	190	.id = -1,
	191	.num_resources = ARRAY_SIZE(poodlets_resources),
	192	.resource = poodlets_resources,
	193	};
	194
13b9d47e RP	195
	196	/*
	197	* MMC/SD Device
	198	*
	199	* The card detect interrupt isn't debounced so we delay it by 250ms
	200	* to give the card a chance to fully insert/eject.
	201	*/
	202	static struct pxamci_platform_data poodle_mci_platform_data;
	203
40220c1a	204	static int poodle_mci_init(struct device dev, irq_handler_t poodle_detect_int, void data)
13b9d47e RP	205	{
	206	int err;
	207
	208	/* setup GPIO for PXA25x MMC controller */
	209	pxa_gpio_mode(GPIO6_MMCCLK_MD);
	210	pxa_gpio_mode(GPIO8_MMCCS0_MD);
	211	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT \| GPIO_IN);
88660351	212	pxa_gpio_mode(POODLE_GPIO_nSD_WP \| GPIO_IN);
13b9d47e	213	pxa_gpio_mode(POODLE_GPIO_SD_PWR \| GPIO_OUT);
88660351	214	pxa_gpio_mode(POODLE_GPIO_SD_PWR1 \| GPIO_OUT);
13b9d47e RP	215
	216	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
	217
9ded96f2	218	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
52e405ea	219	IRQF_DISABLED \| IRQF_TRIGGER_RISING \| IRQF_TRIGGER_FALLING,
9ded96f2	220	"MMC card detect", data);
2687bd38	221	if (err)
13b9d47e	222	printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
13b9d47e	223
2687bd38	224	return err;
13b9d47e RP	225	}
	226
	227	static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
	228	{
	229	struct pxamci_platform_data* p_d = dev->platform_data;
	230
88660351 RP	231	if (( 1 << vdd) & p_d->ocr_mask) {
	232	GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
	233	mdelay(2);
	234	GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
	235	} else {
	236	GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
	237	GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
	238	}
	239	}
	240
	241	static int poodle_mci_get_ro(struct device *dev)
	242	{
	243	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
13b9d47e RP	244	}
13b9d47e RP	245
88660351	246
13b9d47e RP	247	static void poodle_mci_exit(struct device dev, void data)
	248	{
	249	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
	250	}
	251
	252	static struct pxamci_platform_data poodle_mci_platform_data = {
	253	.ocr_mask = MMC_VDD_32_33\|MMC_VDD_33_34,
	254	.init = poodle_mci_init,
88660351	255	.get_ro = poodle_mci_get_ro,
13b9d47e RP	256	.setpower = poodle_mci_setpower,
	257	.exit = poodle_mci_exit,
	258	};
	259
	260
8e4b8715 RP	261	/*
	262	* Irda
	263	*/
	264	static void poodle_irda_transceiver_mode(struct device *dev, int mode)
	265	{
	266	if (mode & IR_OFF) {
	267	GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
	268	} else {
	269	GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
	270	}
0fc3ff31	271	pxa2xx_transceiver_mode(dev, mode);
8e4b8715 RP	272	}
	273
	274	static struct pxaficp_platform_data poodle_ficp_platform_data = {
	275	.transceiver_cap = IR_SIRMODE \| IR_OFF,
	276	.transceiver_mode = poodle_irda_transceiver_mode,
	277	};
	278
	279
13b9d47e RP	280	/*
	281	* USB Device Controller
	282	*/
	283	static void poodle_udc_command(int cmd)
	284	{
	285	switch(cmd) {
	286	case PXA2XX_UDC_CMD_CONNECT:
	287	GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
	288	break;
	289	case PXA2XX_UDC_CMD_DISCONNECT:
	290	GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
	291	break;
	292	}
	293	}
	294
	295	static struct pxa2xx_udc_mach_info udc_info __initdata = {
	296	/* no connect GPIO; poodle can't tell connection status */
	297	.udc_command = poodle_udc_command,
	298	};
	299
	300
1da177e4	301	/* PXAFB device */
d14b272b	302	static struct pxafb_mode_info poodle_fb_mode = {
1da177e4	303	.pixclock = 144700,
1da177e4 LT	304	.xres = 320,
	305	.yres = 240,
	306	.bpp = 16,
1da177e4 LT	307	.hsync_len = 7,
	308	.left_margin = 11,
	309	.right_margin = 30,
1da177e4 LT	310	.vsync_len = 2,
	311	.upper_margin = 2,
	312	.lower_margin = 0,
	313	.sync = FB_SYNC_HOR_HIGH_ACT \| FB_SYNC_VERT_HIGH_ACT,
d14b272b	314	};
1da177e4	315
d14b272b RP	316	static struct pxafb_mach_info poodle_fb_info = {
	317	.modes = &poodle_fb_mode,
	318	.num_modes = 1,
1da177e4 LT	319	.lccr0 = LCCR0_Act \| LCCR0_Sngl \| LCCR0_Color,
1da177e4 LT	320	.lccr3 = 0,
1da177e4 LT	321	};
	322
	323	static struct platform_device *devices[] __initdata = {
faed5684	324	&poodle_locomo_device,
1da177e4	325	&poodle_scoop_device,
faed5684 RP	326	&poodle_ssp_device,
faed5684 RP	327	&poodle_ts_device,
1da177e4 LT	328	};
1da177e4 LT	329
74617fb6 RP	330	static void poodle_poweroff(void)
74617fb6 RP	331	{
74617fb6 RP	332	arm_machine_restart('h');
	333	}
	334
	335	static void poodle_restart(char mode)
	336	{
74617fb6 RP	337	arm_machine_restart('h');
	338	}
	339
1da177e4 LT	340	static void __init poodle_init(void)
	341	{
	342	int ret = 0;
	343
74617fb6 RP	344	pm_power_off = poodle_poweroff;
	345	arm_pm_restart = poodle_restart;
	346
f29d2455 RP	347	/* setup sleep mode values */
	348	PWER = 0x00000002;
	349	PFER = 0x00000000;
	350	PRER = 0x00000002;
	351	PGSR0 = 0x00008000;
	352	PGSR1 = 0x003F0202;
	353	PGSR2 = 0x0001C000;
	354	PCFR \|= PCFR_OPDE;
	355
1da177e4 LT	356	/* cpu initialize */
	357	/* Pgsr Register */
	358	PGSR0 = 0x0146dd80;
	359	PGSR1 = 0x03bf0890;
	360	PGSR2 = 0x0001c000;
	361
	362	/* Alternate Register */
	363	GAFR0_L = 0x01001000;
	364	GAFR0_U = 0x591a8010;
	365	GAFR1_L = 0x900a8451;
	366	GAFR1_U = 0xaaa5aaaa;
	367	GAFR2_L = 0x8aaaaaaa;
	368	GAFR2_U = 0x00000002;
	369
	370	/* Direction Register */
	371	GPDR0 = 0xd3f0904c;
	372	GPDR1 = 0xfcffb7d3;
	373	GPDR2 = 0x0001ffff;
	374
	375	/* Output Register */
	376	GPCR0 = 0x00000000;
	377	GPCR1 = 0x00000000;
	378	GPCR2 = 0x00000000;
	379
	380	GPSR0 = 0x00400000;
	381	GPSR1 = 0x00000000;
	382	GPSR2 = 0x00000000;
	383
2b0defd4 EM	384	platform_scoop_config = &poodle_pcmcia_config;
	385	corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
	386
	387	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
	388	if (ret)
	389	pr_warning("poodle: Unable to register LoCoMo device\n");
	390
faed5684	391	set_pxa_fb_parent(&poodle_locomo_device.dev);
1da177e4	392	set_pxa_fb_info(&poodle_fb_info);
13b9d47e	393	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP \| GPIO_OUT);
8e4b8715	394	pxa_gpio_mode(POODLE_GPIO_IR_ON \| GPIO_OUT);
13b9d47e RP	395	pxa_set_udc_info(&udc_info);
13b9d47e RP	396	pxa_set_mci_info(&poodle_mci_platform_data);
8e4b8715	397	pxa_set_ficp_info(&poodle_ficp_platform_data);
f8787fdc	398	pxa_set_i2c_info(NULL);
1da177e4 LT	399	}
	400
	401	static void __init fixup_poodle(struct machine_desc *desc,
	402	struct tag tags, char cmdline, struct meminfo mi)
	403	{
	404	sharpsl_save_param();
b2e6f755 RP	405	mi->nr_banks=1;
	406	mi->bank[0].start = 0xa0000000;
	407	mi->bank[0].node = 0;
	408	mi->bank[0].size = (3210241024);
1da177e4 LT	409	}
1da177e4 LT	410
1da177e4	411	MACHINE_START(POODLE, "SHARP Poodle")
e9dea0c6	412	.phys_io = 0x40000000,
68070bde	413	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
e9dea0c6	414	.fixup = fixup_poodle,
f29d2455	415	.map_io = pxa_map_io,
cd49104d	416	.init_irq = pxa25x_init_irq,
e9dea0c6 RK	417	.timer = &pxa_timer,
e9dea0c6 RK	418	.init_machine = poodle_init,
1da177e4	419	MACHINE_END