Commit | Line | Data |
---|---|---|
8459c159 DO |
1 | /* |
2 | * Support for Sharp SL-C6000x PDAs | |
3 | * Model: (Tosa) | |
4 | * | |
5 | * Copyright (c) 2005 Dirk Opfer | |
6 | * | |
7 | * Based on code written by Sharp/Lineo for 2.4 kernels | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/init.h> | |
067c9048 | 17 | #include <linux/platform_device.h> |
8459c159 DO |
18 | #include <linux/major.h> |
19 | #include <linux/fs.h> | |
20 | #include <linux/interrupt.h> | |
21 | #include <linux/mmc/host.h> | |
22 | ||
23 | #include <asm/setup.h> | |
24 | #include <asm/memory.h> | |
25 | #include <asm/mach-types.h> | |
26 | #include <asm/hardware.h> | |
27 | #include <asm/irq.h> | |
28 | #include <asm/arch/irda.h> | |
29 | #include <asm/arch/mmc.h> | |
30 | #include <asm/arch/udc.h> | |
31 | ||
32 | #include <asm/mach/arch.h> | |
33 | #include <asm/mach/map.h> | |
34 | #include <asm/mach/irq.h> | |
35 | ||
36 | #include <asm/arch/pxa-regs.h> | |
8459c159 DO |
37 | #include <asm/arch/tosa.h> |
38 | ||
39 | #include <asm/hardware/scoop.h> | |
40 | #include <asm/mach/sharpsl_param.h> | |
41 | ||
42 | #include "generic.h" | |
43 | ||
44 | ||
45 | /* | |
46 | * SCOOP Device | |
47 | */ | |
48 | static struct resource tosa_scoop_resources[] = { | |
49 | [0] = { | |
50 | .start = TOSA_CF_PHYS, | |
51 | .end = TOSA_CF_PHYS + 0xfff, | |
52 | .flags = IORESOURCE_MEM, | |
53 | }, | |
54 | }; | |
55 | ||
56 | static struct scoop_config tosa_scoop_setup = { | |
57 | .io_dir = TOSA_SCOOP_IO_DIR, | |
58 | .io_out = TOSA_SCOOP_IO_OUT, | |
59 | ||
60 | }; | |
61 | ||
62 | struct platform_device tosascoop_device = { | |
63 | .name = "sharp-scoop", | |
64 | .id = 0, | |
65 | .dev = { | |
66 | .platform_data = &tosa_scoop_setup, | |
67 | }, | |
68 | .num_resources = ARRAY_SIZE(tosa_scoop_resources), | |
69 | .resource = tosa_scoop_resources, | |
70 | }; | |
71 | ||
72 | ||
73 | /* | |
74 | * SCOOP Device Jacket | |
75 | */ | |
76 | static struct resource tosa_scoop_jc_resources[] = { | |
77 | [0] = { | |
78 | .start = TOSA_SCOOP_PHYS + 0x40, | |
79 | .end = TOSA_SCOOP_PHYS + 0xfff, | |
80 | .flags = IORESOURCE_MEM, | |
81 | }, | |
82 | }; | |
83 | ||
84 | static struct scoop_config tosa_scoop_jc_setup = { | |
85 | .io_dir = TOSA_SCOOP_JC_IO_DIR, | |
86 | .io_out = TOSA_SCOOP_JC_IO_OUT, | |
87 | }; | |
88 | ||
89 | struct platform_device tosascoop_jc_device = { | |
90 | .name = "sharp-scoop", | |
91 | .id = 1, | |
92 | .dev = { | |
93 | .platform_data = &tosa_scoop_jc_setup, | |
94 | .parent = &tosascoop_device.dev, | |
95 | }, | |
96 | .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources), | |
97 | .resource = tosa_scoop_jc_resources, | |
98 | }; | |
99 | ||
4c18ad20 DO |
100 | /* |
101 | * PCMCIA | |
102 | */ | |
8459c159 DO |
103 | static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { |
104 | { | |
105 | .dev = &tosascoop_device.dev, | |
106 | .irq = TOSA_IRQ_GPIO_CF_IRQ, | |
107 | .cd_irq = TOSA_IRQ_GPIO_CF_CD, | |
108 | .cd_irq_str = "PCMCIA0 CD", | |
109 | },{ | |
110 | .dev = &tosascoop_jc_device.dev, | |
111 | .irq = TOSA_IRQ_GPIO_JC_CF_IRQ, | |
112 | .cd_irq = -1, | |
113 | }, | |
114 | }; | |
115 | ||
4c18ad20 DO |
116 | static void tosa_pcmcia_init(void) |
117 | { | |
118 | /* Setup default state of GPIO outputs | |
119 | before we enable them as outputs. */ | |
120 | GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | | |
121 | GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | | |
122 | GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | | |
123 | GPIO_bit(GPIO53_nPCE_2); | |
124 | ||
125 | pxa_gpio_mode(GPIO48_nPOE_MD); | |
126 | pxa_gpio_mode(GPIO49_nPWE_MD); | |
127 | pxa_gpio_mode(GPIO50_nPIOR_MD); | |
128 | pxa_gpio_mode(GPIO51_nPIOW_MD); | |
129 | pxa_gpio_mode(GPIO55_nPREG_MD); | |
130 | pxa_gpio_mode(GPIO56_nPWAIT_MD); | |
131 | pxa_gpio_mode(GPIO57_nIOIS16_MD); | |
132 | pxa_gpio_mode(GPIO52_nPCE_1_MD); | |
133 | pxa_gpio_mode(GPIO53_nPCE_2_MD); | |
134 | pxa_gpio_mode(GPIO54_pSKTSEL_MD); | |
135 | } | |
136 | ||
137 | static struct scoop_pcmcia_config tosa_pcmcia_config = { | |
138 | .devs = &tosa_pcmcia_scoop[0], | |
139 | .num_devs = 2, | |
140 | .pcmcia_init = tosa_pcmcia_init, | |
141 | }; | |
142 | ||
a93876c1 DO |
143 | /* |
144 | * USB Device Controller | |
145 | */ | |
146 | static void tosa_udc_command(int cmd) | |
147 | { | |
148 | switch(cmd) { | |
149 | case PXA2XX_UDC_CMD_CONNECT: | |
150 | set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); | |
151 | break; | |
152 | case PXA2XX_UDC_CMD_DISCONNECT: | |
153 | reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); | |
154 | break; | |
155 | } | |
156 | } | |
157 | ||
158 | static int tosa_udc_is_connected(void) | |
159 | { | |
160 | return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); | |
161 | } | |
162 | ||
163 | ||
164 | static struct pxa2xx_udc_mach_info udc_info __initdata = { | |
165 | .udc_command = tosa_udc_command, | |
166 | .udc_is_connected = tosa_udc_is_connected, | |
167 | }; | |
168 | ||
169 | /* | |
170 | * MMC/SD Device | |
171 | */ | |
172 | static struct pxamci_platform_data tosa_mci_platform_data; | |
173 | ||
174 | static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) | |
175 | { | |
176 | int err; | |
177 | ||
178 | /* setup GPIO for PXA25x MMC controller */ | |
179 | pxa_gpio_mode(GPIO6_MMCCLK_MD); | |
180 | pxa_gpio_mode(GPIO8_MMCCS0_MD); | |
181 | pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); | |
182 | ||
183 | tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); | |
184 | ||
185 | err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, | |
186 | "MMC/SD card detect", data); | |
187 | if (err) { | |
188 | printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); | |
189 | return -1; | |
190 | } | |
191 | ||
192 | set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); | |
193 | ||
194 | return 0; | |
195 | } | |
196 | ||
197 | static void tosa_mci_setpower(struct device *dev, unsigned int vdd) | |
198 | { | |
199 | struct pxamci_platform_data* p_d = dev->platform_data; | |
200 | ||
201 | if (( 1 << vdd) & p_d->ocr_mask) { | |
202 | set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); | |
203 | } else { | |
204 | reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); | |
205 | } | |
206 | } | |
207 | ||
208 | static int tosa_mci_get_ro(struct device *dev) | |
209 | { | |
210 | return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); | |
211 | } | |
212 | ||
213 | static void tosa_mci_exit(struct device *dev, void *data) | |
214 | { | |
215 | free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); | |
216 | } | |
217 | ||
218 | static struct pxamci_platform_data tosa_mci_platform_data = { | |
219 | .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
220 | .init = tosa_mci_init, | |
221 | .get_ro = tosa_mci_get_ro, | |
222 | .setpower = tosa_mci_setpower, | |
223 | .exit = tosa_mci_exit, | |
224 | }; | |
225 | ||
226 | /* | |
227 | * Irda | |
228 | */ | |
229 | static void tosa_irda_transceiver_mode(struct device *dev, int mode) | |
230 | { | |
231 | if (mode & IR_OFF) { | |
232 | reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); | |
233 | pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); | |
234 | pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); | |
235 | } else { | |
236 | pxa_gpio_mode(GPIO47_STTXD_MD); | |
237 | set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); | |
238 | } | |
239 | } | |
240 | ||
241 | static struct pxaficp_platform_data tosa_ficp_platform_data = { | |
242 | .transceiver_cap = IR_SIRMODE | IR_OFF, | |
243 | .transceiver_mode = tosa_irda_transceiver_mode, | |
244 | }; | |
245 | ||
246 | /* | |
247 | * Tosa Keyboard | |
248 | */ | |
249 | static struct platform_device tosakbd_device = { | |
250 | .name = "tosa-keyboard", | |
251 | .id = -1, | |
252 | }; | |
8459c159 DO |
253 | |
254 | static struct platform_device *devices[] __initdata = { | |
255 | &tosascoop_device, | |
256 | &tosascoop_jc_device, | |
a93876c1 | 257 | &tosakbd_device, |
8459c159 DO |
258 | }; |
259 | ||
260 | static void __init tosa_init(void) | |
261 | { | |
262 | pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); | |
263 | pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); | |
a93876c1 | 264 | pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); |
8459c159 DO |
265 | |
266 | /* setup sleep mode values */ | |
267 | PWER = 0x00000002; | |
268 | PFER = 0x00000000; | |
269 | PRER = 0x00000002; | |
270 | PGSR0 = 0x00000000; | |
271 | PGSR1 = 0x00FF0002; | |
272 | PGSR2 = 0x00014000; | |
273 | PCFR |= PCFR_OPDE; | |
274 | ||
a93876c1 | 275 | /* enable batt_fault */ |
8459c159 DO |
276 | PMCR = 0x01; |
277 | ||
a93876c1 DO |
278 | pxa_set_mci_info(&tosa_mci_platform_data); |
279 | pxa_set_udc_info(&udc_info); | |
280 | pxa_set_ficp_info(&tosa_ficp_platform_data); | |
4c18ad20 | 281 | platform_scoop_config = &tosa_pcmcia_config; |
8459c159 | 282 | |
4c18ad20 | 283 | platform_add_devices(devices, ARRAY_SIZE(devices)); |
8459c159 DO |
284 | } |
285 | ||
286 | static void __init fixup_tosa(struct machine_desc *desc, | |
287 | struct tag *tags, char **cmdline, struct meminfo *mi) | |
288 | { | |
289 | sharpsl_save_param(); | |
290 | mi->nr_banks=1; | |
291 | mi->bank[0].start = 0xa0000000; | |
292 | mi->bank[0].node = 0; | |
293 | mi->bank[0].size = (64*1024*1024); | |
294 | } | |
295 | ||
296 | MACHINE_START(TOSA, "SHARP Tosa") | |
8459c159 DO |
297 | .phys_io = 0x40000000, |
298 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | |
299 | .fixup = fixup_tosa, | |
300 | .map_io = pxa_map_io, | |
301 | .init_irq = pxa_init_irq, | |
302 | .init_machine = tosa_init, | |
303 | .timer = &pxa_timer, | |
304 | MACHINE_END |