[deliverable/linux.git] / arch / arm / mach-realview / include / mach / board-pb1176.h

/*
 * arch/arm/mach-realview/include/mach/board-pb1176.h
 *
 * Copyright (C) 2008 ARM Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */

#ifndef __ASM_ARCH_BOARD_PB1176_H
#define __ASM_ARCH_BOARD_PB1176_H

#include <mach/platform.h>

/*
 * Peripheral addresses
 */
#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_PB1176_FLASH_BASE		0x30000000
#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M

#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */

/*
 * PCI regions
 */
#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */

#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */

#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
#define REALVIEW_DC1176_ROM_BASE		0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */

/*
 * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
 */
#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100

#endif	/* __ASM_ARCH_BOARD_PB1176_H */
Commit	Line	Data
a0316b24	1	/*
a09e64fb	2	* arch/arm/mach-realview/include/mach/board-pb1176.h
a0316b24 BB	3	*
	4	* Copyright (C) 2008 ARM Limited
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* published by the Free Software Foundation.
	9	*
	10	* This program is distributed in the hope that it will be useful,
	11	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	13	* GNU General Public License for more details.
	14	*
	15	* You should have received a copy of the GNU General Public License
	16	* along with this program; if not, write to the Free Software
	17	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	18	* MA 02110-1301, USA.
	19	*/
	20
	21	#ifndef __ASM_ARCH_BOARD_PB1176_H
	22	#define __ASM_ARCH_BOARD_PB1176_H
	23
a09e64fb	24	#include <mach/platform.h>
a0316b24 BB	25
	26	/*
	27	* Peripheral addresses
	28	*/
48f1d5a3	29	#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */
a0316b24 BB	30	#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */
	31	#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */
	32	#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */
	33	#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
	34	#define REALVIEW_PB1176_FLASH_BASE 0x30000000
	35	#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
af607747 CM	36	#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */
af607747 CM	37	#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M
a0316b24 BB	38
	39	#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
	40	#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
	41	#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */
	42	#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */
	43	#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */
	44	#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */
	45	#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */
	46	#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */
	47	#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */
	48	#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */
	49	#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */
	50	#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */
	51	#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */
	52	#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */
	53
	54	/*
	55	* PCI regions
	56	*/
	57	#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */
	58	#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */
	59	#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */
	60	#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */
	61	#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */
	62	#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */
	63
	64	#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */
	65	#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */
	66	#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */
	67	#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */
	68	#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */
	69	#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */
	70
	71	#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */
	72	#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */
0ec5a95b	73	#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
a0316b24 BB	74	#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */
	75	#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
	76	#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
	77
426fcd2a	78	/*
4c9f8be7	79	* Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
426fcd2a	80	*/
4c9f8be7	81	#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100
426fcd2a	82
a0316b24	83	#endif /* __ASM_ARCH_BOARD_PB1176_H */