Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* linux/arch/arm/mach-s3c2410/mach-h1940.c |
2 | * | |
3 | * Copyright (c) 2003-2005 Simtec Electronics | |
4 | * Ben Dooks <ben@simtec.co.uk> | |
5 | * | |
6 | * http://www.handhelds.org/projects/h1940.html | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | * | |
1da177e4 LT |
12 | */ |
13 | ||
14 | #include <linux/kernel.h> | |
15 | #include <linux/types.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/list.h> | |
18 | #include <linux/timer.h> | |
19 | #include <linux/init.h> | |
333a42e1 | 20 | #include <linux/sysdev.h> |
b6d1f542 | 21 | #include <linux/serial_core.h> |
d052d1be | 22 | #include <linux/platform_device.h> |
fced80c7 | 23 | #include <linux/io.h> |
1da177e4 LT |
24 | |
25 | #include <asm/mach/arch.h> | |
26 | #include <asm/mach/map.h> | |
27 | #include <asm/mach/irq.h> | |
28 | ||
a09e64fb | 29 | #include <mach/hardware.h> |
1da177e4 LT |
30 | #include <asm/irq.h> |
31 | #include <asm/mach-types.h> | |
32 | ||
531b617c | 33 | #include <asm/plat-s3c/regs-serial.h> |
a09e64fb RK |
34 | #include <mach/regs-lcd.h> |
35 | #include <mach/regs-gpio.h> | |
36 | #include <mach/regs-clock.h> | |
f92273c1 | 37 | |
a09e64fb RK |
38 | #include <mach/h1940.h> |
39 | #include <mach/h1940-latch.h> | |
40 | #include <mach/fb.h> | |
06cfa556 | 41 | #include <asm/plat-s3c24xx/udc.h> |
1da177e4 | 42 | |
a21765a7 BD |
43 | #include <asm/plat-s3c24xx/clock.h> |
44 | #include <asm/plat-s3c24xx/devs.h> | |
45 | #include <asm/plat-s3c24xx/cpu.h> | |
46 | #include <asm/plat-s3c24xx/pm.h> | |
1da177e4 LT |
47 | |
48 | static struct map_desc h1940_iodesc[] __initdata = { | |
e1981680 BD |
49 | [0] = { |
50 | .virtual = (unsigned long)H1940_LATCH, | |
51 | .pfn = __phys_to_pfn(H1940_PA_LATCH), | |
52 | .length = SZ_16K, | |
53 | .type = MT_DEVICE | |
54 | }, | |
1da177e4 LT |
55 | }; |
56 | ||
57 | #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK | |
58 | #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB | |
59 | #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE | |
60 | ||
66a9b49a | 61 | static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = { |
1da177e4 LT |
62 | [0] = { |
63 | .hwport = 0, | |
64 | .flags = 0, | |
65 | .ucon = 0x3c5, | |
66 | .ulcon = 0x03, | |
67 | .ufcon = 0x51, | |
68 | }, | |
69 | [1] = { | |
70 | .hwport = 1, | |
71 | .flags = 0, | |
72 | .ucon = 0x245, | |
73 | .ulcon = 0x03, | |
74 | .ufcon = 0x00, | |
75 | }, | |
76 | /* IR port */ | |
77 | [2] = { | |
78 | .hwport = 2, | |
79 | .flags = 0, | |
80 | .uart_flags = UPF_CONS_FLOW, | |
81 | .ucon = 0x3c5, | |
82 | .ulcon = 0x43, | |
83 | .ufcon = 0x51, | |
84 | } | |
85 | }; | |
86 | ||
e1981680 BD |
87 | /* Board control latch control */ |
88 | ||
89 | static unsigned int latch_state = H1940_LATCH_DEFAULT; | |
90 | ||
91 | void h1940_latch_control(unsigned int clear, unsigned int set) | |
92 | { | |
93 | unsigned long flags; | |
94 | ||
95 | local_irq_save(flags); | |
96 | ||
97 | latch_state &= ~clear; | |
98 | latch_state |= set; | |
99 | ||
100 | __raw_writel(latch_state, H1940_LATCH); | |
101 | ||
102 | local_irq_restore(flags); | |
103 | } | |
104 | ||
105 | EXPORT_SYMBOL_GPL(h1940_latch_control); | |
1da177e4 | 106 | |
71a9c424 AP |
107 | static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) |
108 | { | |
109 | printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); | |
110 | ||
111 | switch (cmd) | |
112 | { | |
113 | case S3C2410_UDC_P_ENABLE : | |
114 | h1940_latch_control(0, H1940_LATCH_USB_DP); | |
115 | break; | |
116 | case S3C2410_UDC_P_DISABLE : | |
117 | h1940_latch_control(H1940_LATCH_USB_DP, 0); | |
118 | break; | |
119 | case S3C2410_UDC_P_RESET : | |
120 | break; | |
121 | default: | |
122 | break; | |
123 | } | |
124 | } | |
125 | ||
126 | static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { | |
127 | .udc_command = h1940_udc_pullup, | |
128 | .vbus_pin = S3C2410_GPG5, | |
129 | .vbus_pin_inverted = 1, | |
130 | }; | |
131 | ||
132 | ||
f92273c1 AP |
133 | /** |
134 | * Set lcd on or off | |
135 | **/ | |
09fe75f6 | 136 | static struct s3c2410fb_display h1940_lcd __initdata = { |
f28ef573 KH |
137 | .lcdcon5= S3C2410_LCDCON5_FRM565 | \ |
138 | S3C2410_LCDCON5_INVVLINE | \ | |
139 | S3C2410_LCDCON5_HWSWP, | |
09fe75f6 | 140 | |
1f411537 | 141 | .type = S3C2410_LCDCON1_TFT, |
09fe75f6 KH |
142 | .width = 240, |
143 | .height = 320, | |
69816699 | 144 | .pixclock = 260000, |
09fe75f6 KH |
145 | .xres = 240, |
146 | .yres = 320, | |
147 | .bpp = 16, | |
1f411537 KH |
148 | .left_margin = 20, |
149 | .right_margin = 8, | |
93d11f5a | 150 | .hsync_len = 4, |
5f20f69b KH |
151 | .upper_margin = 8, |
152 | .lower_margin = 7, | |
93d11f5a | 153 | .vsync_len = 1, |
09fe75f6 KH |
154 | }; |
155 | ||
156 | static struct s3c2410fb_mach_info h1940_fb_info __initdata = { | |
09fe75f6 KH |
157 | .displays = &h1940_lcd, |
158 | .num_displays = 1, | |
159 | .default_display = 0, | |
160 | ||
f92273c1 AP |
161 | .lpcsel= 0x02, |
162 | .gpccon= 0xaa940659, | |
163 | .gpccon_mask= 0xffffffff, | |
164 | .gpcup= 0x0000ffff, | |
165 | .gpcup_mask= 0xffffffff, | |
166 | .gpdcon= 0xaa84aaa0, | |
167 | .gpdcon_mask= 0xffffffff, | |
168 | .gpdup= 0x0000faff, | |
169 | .gpdup_mask= 0xffffffff, | |
f92273c1 | 170 | }; |
1da177e4 | 171 | |
d2a76020 AP |
172 | static struct platform_device s3c_device_leds = { |
173 | .name = "h1940-leds", | |
174 | .id = -1, | |
175 | }; | |
176 | ||
7fdc7849 AP |
177 | static struct platform_device s3c_device_bluetooth = { |
178 | .name = "h1940-bt", | |
179 | .id = -1, | |
180 | }; | |
181 | ||
1da177e4 LT |
182 | static struct platform_device *h1940_devices[] __initdata = { |
183 | &s3c_device_usb, | |
184 | &s3c_device_lcd, | |
185 | &s3c_device_wdt, | |
186 | &s3c_device_i2c, | |
187 | &s3c_device_iis, | |
71a9c424 | 188 | &s3c_device_usbgadget, |
d2a76020 | 189 | &s3c_device_leds, |
7fdc7849 | 190 | &s3c_device_bluetooth, |
1da177e4 LT |
191 | }; |
192 | ||
5fe10ab1 | 193 | static void __init h1940_map_io(void) |
1da177e4 LT |
194 | { |
195 | s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); | |
196 | s3c24xx_init_clocks(0); | |
197 | s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); | |
9073341c BD |
198 | |
199 | /* setup PM */ | |
200 | ||
b1dfe1f1 | 201 | #ifdef CONFIG_PM_H1940 |
9073341c | 202 | memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); |
b1dfe1f1 | 203 | #endif |
9073341c | 204 | s3c2410_pm_init(); |
1da177e4 LT |
205 | } |
206 | ||
5fe10ab1 | 207 | static void __init h1940_init_irq(void) |
1da177e4 LT |
208 | { |
209 | s3c24xx_init_irq(); | |
1da177e4 LT |
210 | } |
211 | ||
5fe10ab1 | 212 | static void __init h1940_init(void) |
f92273c1 | 213 | { |
71a9c424 AP |
214 | u32 tmp; |
215 | ||
09fe75f6 | 216 | s3c24xx_fb_set_platdata(&h1940_fb_info); |
71a9c424 AP |
217 | s3c24xx_udc_set_platdata(&h1940_udc_cfg); |
218 | ||
219 | /* Turn off suspend on both USB ports, and switch the | |
220 | * selectable USB port to USB device mode. */ | |
221 | ||
222 | s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | | |
223 | S3C2410_MISCCR_USBSUSPND0 | | |
224 | S3C2410_MISCCR_USBSUSPND1, 0x0); | |
225 | ||
226 | tmp = ( | |
227 | 0x78 << S3C2410_PLLCON_MDIVSHIFT) | |
228 | | (0x02 << S3C2410_PLLCON_PDIVSHIFT) | |
229 | | (0x03 << S3C2410_PLLCON_SDIVSHIFT); | |
230 | writel(tmp, S3C2410_UPLLCON); | |
57e5171c BD |
231 | |
232 | platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); | |
f92273c1 AP |
233 | } |
234 | ||
1da177e4 | 235 | MACHINE_START(H1940, "IPAQ-H1940") |
e9dea0c6 | 236 | /* Maintainer: Ben Dooks <ben@fluff.org> */ |
e9dea0c6 RK |
237 | .phys_io = S3C2410_PA_UART, |
238 | .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, | |
239 | .boot_params = S3C2410_SDRAM_PA + 0x100, | |
240 | .map_io = h1940_map_io, | |
241 | .init_irq = h1940_init_irq, | |
71a9c424 | 242 | .init_machine = h1940_init, |
1da177e4 LT |
243 | .timer = &s3c24xx_timer, |
244 | MACHINE_END |