Commit | Line | Data |
---|---|---|
85fd6d63 KK |
1 | # arch/arm/mach-s3c24xx/Kconfig |
2 | # | |
3 | # Copyright (c) 2012 Samsung Electronics Co., Ltd. | |
4 | # http://www.samsung.com/ | |
5 | # | |
6 | # Copyright 2007 Simtec Electronics | |
7 | # | |
8 | # Licensed under GPLv2 | |
9 | ||
10 | if ARCH_S3C24XX | |
11 | ||
09ec1d7e KK |
12 | config PLAT_S3C24XX |
13 | def_bool y | |
14 | select ARCH_REQUIRE_GPIOLIB | |
15 | select NO_IOPORT | |
16 | select S3C_DEV_NAND | |
17 | select IRQ_DOMAIN | |
18 | help | |
19 | Base platform code for any Samsung S3C24XX device | |
20 | ||
85fd6d63 KK |
21 | menu "SAMSUNG S3C24XX SoCs Support" |
22 | ||
23 | comment "S3C24XX SoCs" | |
24 | ||
25 | config CPU_S3C2410 | |
26 | bool "SAMSUNG S3C2410" | |
27 | default y | |
28 | select CPU_ARM920T | |
85fd6d63 | 29 | select CPU_LLSERIAL_S3C2410 |
b1b3f49c | 30 | select S3C2410_CLOCK |
85fd6d63 | 31 | select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX |
b1b3f49c | 32 | select S3C2410_PM if PM |
85fd6d63 KK |
33 | help |
34 | Support for S3C2410 and S3C2410A family from the S3C24XX line | |
35 | of Samsung Mobile CPUs. | |
36 | ||
85e2a26f KK |
37 | config CPU_S3C2412 |
38 | bool "SAMSUNG S3C2412" | |
39 | depends on ARCH_S3C24XX | |
40 | select CPU_ARM926T | |
41 | select CPU_LLSERIAL_S3C2440 | |
85e2a26f | 42 | select S3C2412_DMA if S3C24XX_DMA |
b1b3f49c | 43 | select S3C2412_PM if PM |
85e2a26f KK |
44 | help |
45 | Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line | |
46 | ||
26febf8e KK |
47 | config CPU_S3C2416 |
48 | bool "SAMSUNG S3C2416/S3C2450" | |
49 | depends on ARCH_S3C24XX | |
50 | select CPU_ARM926T | |
51 | select CPU_LLSERIAL_S3C2440 | |
b1b3f49c | 52 | select S3C2416_PM if PM |
8c3d7c30 | 53 | select S3C2443_COMMON |
46cdaba1 | 54 | select S3C2443_DMA if S3C24XX_DMA |
b1b3f49c | 55 | select SAMSUNG_CLKSRC |
26febf8e KK |
56 | help |
57 | Support for the S3C2416 SoC from the S3C24XX line | |
58 | ||
dd6f01b5 KK |
59 | config CPU_S3C2440 |
60 | bool "SAMSUNG S3C2440" | |
61 | select CPU_ARM920T | |
62 | select CPU_LLSERIAL_S3C2440 | |
63 | select S3C2410_CLOCK | |
64 | select S3C2410_PM if PM | |
65 | select S3C2440_DMA if S3C24XX_DMA | |
66 | help | |
67 | Support for S3C2440 Samsung Mobile CPU based systems. | |
68 | ||
69 | config CPU_S3C2442 | |
70 | bool "SAMSUNG S3C2442" | |
71 | select CPU_ARM920T | |
72 | select CPU_LLSERIAL_S3C2440 | |
73 | select S3C2410_CLOCK | |
74 | select S3C2410_PM if PM | |
75 | help | |
76 | Support for S3C2442 Samsung Mobile CPU based systems. | |
77 | ||
78 | config CPU_S3C244X | |
79 | def_bool y | |
80 | depends on CPU_S3C2440 || CPU_S3C2442 | |
81 | ||
84c028b9 KK |
82 | config CPU_S3C2443 |
83 | bool "SAMSUNG S3C2443" | |
84 | depends on ARCH_S3C24XX | |
85 | select CPU_ARM920T | |
86 | select CPU_LLSERIAL_S3C2440 | |
8c3d7c30 | 87 | select S3C2443_COMMON |
84c028b9 | 88 | select S3C2443_DMA if S3C24XX_DMA |
b1b3f49c | 89 | select SAMSUNG_CLKSRC |
84c028b9 KK |
90 | help |
91 | Support for the S3C2443 SoC from the S3C24XX line | |
92 | ||
28c569f6 HS |
93 | # common code |
94 | ||
09ec1d7e KK |
95 | config S3C2410_CLOCK |
96 | bool | |
97 | help | |
98 | Clock code for the S3C2410, and similar processors which | |
99 | is currently includes the S3C2410, S3C2440, S3C2442. | |
100 | ||
101 | config S3C24XX_DCLK | |
102 | bool | |
103 | help | |
104 | Clock code for supporting DCLK/CLKOUT on S3C24XX architectures | |
105 | ||
28c569f6 HS |
106 | config S3C24XX_SMDK |
107 | bool | |
108 | help | |
109 | Common machine code for SMDK2410 and SMDK2440 | |
110 | ||
9072dc98 HS |
111 | config S3C24XX_SIMTEC_AUDIO |
112 | bool | |
113 | depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) | |
114 | default y | |
115 | help | |
116 | Add audio devices for common Simtec S3C24XX boards | |
117 | ||
118 | config S3C24XX_SIMTEC_PM | |
119 | bool | |
120 | help | |
121 | Common power management code for systems that are | |
122 | compatible with the Simtec style of power management | |
123 | ||
ec2cc753 HS |
124 | config S3C24XX_SIMTEC_USB |
125 | bool | |
126 | help | |
127 | USB management code for common Simtec S3C24XX boards | |
128 | ||
2c5689a7 HS |
129 | config S3C24XX_SETUP_TS |
130 | bool | |
131 | help | |
132 | Compile in platform device definition for Samsung TouchScreen. | |
133 | ||
09ec1d7e KK |
134 | config S3C24XX_DMA |
135 | bool "S3C2410 DMA support" | |
136 | depends on ARCH_S3C24XX | |
137 | select S3C_DMA | |
138 | help | |
139 | S3C2410 DMA support. This is needed for drivers like sound which | |
140 | use the S3C2410's DMA system to move data to and from the | |
141 | peripheral blocks. | |
142 | ||
143 | config S3C2410_DMA_DEBUG | |
144 | bool "S3C2410 DMA support debug" | |
145 | depends on ARCH_S3C24XX && S3C2410_DMA | |
146 | help | |
147 | Enable debugging output for the DMA code. This option sends info | |
148 | to the kernel log, at priority KERN_DEBUG. | |
149 | ||
85fd6d63 KK |
150 | config S3C2410_DMA |
151 | bool | |
dd6f01b5 KK |
152 | depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) |
153 | default y if CPU_S3C2410 || CPU_S3C2442 | |
85fd6d63 KK |
154 | help |
155 | DMA device selection for S3C2410 and compatible CPUs | |
156 | ||
157 | config S3C2410_PM | |
158 | bool | |
159 | help | |
160 | Power Management code common to S3C2410 and better | |
161 | ||
09ec1d7e KK |
162 | # low-level serial option nodes |
163 | ||
164 | config CPU_LLSERIAL_S3C2410_ONLY | |
165 | bool | |
166 | default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 | |
167 | ||
168 | config CPU_LLSERIAL_S3C2440_ONLY | |
169 | bool | |
170 | default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 | |
171 | ||
172 | config CPU_LLSERIAL_S3C2410 | |
173 | bool | |
174 | help | |
175 | Selected if there is an S3C2410 (or register compatible) serial | |
176 | low-level implementation needed | |
177 | ||
178 | config CPU_LLSERIAL_S3C2440 | |
179 | bool | |
180 | help | |
181 | Selected if there is an S3C2440 (or register compatible) serial | |
182 | low-level implementation needed | |
183 | ||
184 | # gpio configurations | |
185 | ||
186 | config S3C24XX_GPIO_EXTRA | |
187 | int | |
188 | default 128 if S3C24XX_GPIO_EXTRA128 | |
189 | default 64 if S3C24XX_GPIO_EXTRA64 | |
190 | default 16 if ARCH_H1940 | |
191 | default 0 | |
192 | ||
193 | config S3C24XX_GPIO_EXTRA64 | |
194 | bool | |
195 | help | |
196 | Add an extra 64 gpio numbers to the available GPIO pool. This is | |
197 | available for boards that need extra gpios for external devices. | |
198 | ||
199 | config S3C24XX_GPIO_EXTRA128 | |
200 | bool | |
201 | help | |
202 | Add an extra 128 gpio numbers to the available GPIO pool. This is | |
203 | available for boards that need extra gpios for external devices. | |
204 | ||
205 | # cpu frequency items common between s3c2410 and s3c2440/s3c2442 | |
206 | ||
207 | config S3C2410_IOTIMING | |
208 | bool | |
209 | depends on CPU_FREQ_S3C24XX | |
210 | help | |
211 | Internal node to select io timing code that is common to the s3c2410 | |
212 | and s3c2440/s3c2442 cpu frequency support. | |
213 | ||
214 | config S3C2410_CPUFREQ_UTILS | |
215 | bool | |
216 | depends on CPU_FREQ_S3C24XX | |
217 | help | |
218 | Internal node to select timing code that is common to the s3c2410 | |
219 | and s3c2440/s3c244 cpu frequency support. | |
220 | ||
221 | # cpu frequency support common to s3c2412, s3c2413 and s3c2442 | |
222 | ||
223 | config S3C2412_IOTIMING | |
224 | bool | |
225 | depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) | |
226 | help | |
227 | Intel node to select io timing code that is common to the s3c2412 | |
228 | and the s3c2443. | |
229 | ||
7518dde9 KK |
230 | # cpu-specific sections |
231 | ||
232 | if CPU_S3C2410 | |
233 | ||
98713e40 KK |
234 | config S3C2410_CPUFREQ |
235 | bool | |
236 | depends on CPU_FREQ_S3C24XX && CPU_S3C2410 | |
237 | select S3C2410_CPUFREQ_UTILS | |
238 | help | |
239 | CPU Frequency scaling support for S3C2410 | |
240 | ||
82c18712 KK |
241 | config S3C2410_PLL |
242 | bool | |
243 | depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL | |
244 | default y | |
245 | help | |
246 | Select the PLL table for the S3C2410 | |
247 | ||
ec2cc753 | 248 | config S3C24XX_SIMTEC_NOR |
85fd6d63 KK |
249 | bool |
250 | help | |
251 | Internal node to specify machine has simtec NOR mapping | |
252 | ||
253 | config MACH_BAST_IDE | |
254 | bool | |
255 | select HAVE_PATA_PLATFORM | |
256 | help | |
257 | Internal node for machines with an BAST style IDE | |
258 | interface | |
259 | ||
260 | comment "S3C2410 Boards" | |
261 | ||
262 | # | |
263 | # The "S3C2410 Boards" list is ordered alphabetically by option text. | |
264 | # (without ARCH_ or MACH_) | |
265 | # | |
266 | ||
267 | config MACH_AML_M5900 | |
268 | bool "AML M5900 Series" | |
9072dc98 | 269 | select S3C24XX_SIMTEC_PM if PM |
85fd6d63 KK |
270 | select S3C_DEV_USB_HOST |
271 | help | |
272 | Say Y here if you are using the American Microsystems M5900 Series | |
273 | <http://www.amltd.com> | |
274 | ||
275 | config ARCH_BAST | |
276 | bool "Simtec Electronics BAST (EB2410ITX)" | |
b1b3f49c RK |
277 | select ISA |
278 | select MACH_BAST_IDE | |
85fd6d63 | 279 | select S3C2410_IOTIMING if S3C2410_CPUFREQ |
b1b3f49c | 280 | select S3C24XX_DCLK |
ec2cc753 | 281 | select S3C24XX_SIMTEC_NOR |
b1b3f49c | 282 | select S3C24XX_SIMTEC_PM if PM |
ec2cc753 | 283 | select S3C24XX_SIMTEC_USB |
85fd6d63 | 284 | select S3C_DEV_HWMON |
85fd6d63 | 285 | select S3C_DEV_NAND |
b1b3f49c | 286 | select S3C_DEV_USB_HOST |
85fd6d63 KK |
287 | help |
288 | Say Y here if you are using the Simtec Electronics EB2410ITX | |
289 | development board (also known as BAST) | |
290 | ||
291 | config BAST_PC104_IRQ | |
292 | bool "BAST PC104 IRQ support" | |
293 | depends on ARCH_BAST | |
294 | default y | |
295 | help | |
296 | Say Y here to enable the PC104 IRQ routing on the | |
297 | Simtec BAST (EB2410ITX) | |
298 | ||
299 | config ARCH_H1940 | |
300 | bool "IPAQ H1940" | |
301 | select PM_H1940 if PM | |
2c5689a7 | 302 | select S3C24XX_SETUP_TS |
b1b3f49c RK |
303 | select S3C_DEV_NAND |
304 | select S3C_DEV_USB_HOST | |
85fd6d63 KK |
305 | help |
306 | Say Y here if you are using the HP IPAQ H1940 | |
307 | ||
308 | config H1940BT | |
309 | tristate "Control the state of H1940 bluetooth chip" | |
310 | depends on ARCH_H1940 | |
311 | select RFKILL | |
312 | help | |
313 | This is a simple driver that is able to control | |
314 | the state of built in bluetooth chip on h1940. | |
315 | ||
316 | config PM_H1940 | |
317 | bool | |
318 | help | |
319 | Internal node for H1940 and related PM | |
320 | ||
321 | config MACH_N30 | |
322 | bool "Acer N30 family" | |
323 | select MACH_N35 | |
85fd6d63 | 324 | select S3C_DEV_NAND |
b1b3f49c | 325 | select S3C_DEV_USB_HOST |
85fd6d63 KK |
326 | help |
327 | Say Y here if you want suppt for the Acer N30, Acer N35, | |
328 | Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. | |
329 | ||
330 | config MACH_OTOM | |
331 | bool "NexVision OTOM Board" | |
85fd6d63 | 332 | select S3C_DEV_NAND |
b1b3f49c | 333 | select S3C_DEV_USB_HOST |
85fd6d63 KK |
334 | help |
335 | Say Y here if you are using the Nex Vision OTOM board | |
336 | ||
337 | config MACH_QT2410 | |
338 | bool "QT2410" | |
85fd6d63 | 339 | select S3C_DEV_NAND |
b1b3f49c | 340 | select S3C_DEV_USB_HOST |
85fd6d63 KK |
341 | help |
342 | Say Y here if you are using the Armzone QT2410 | |
343 | ||
344 | config ARCH_SMDK2410 | |
345 | bool "SMDK2410/A9M2410" | |
28c569f6 | 346 | select S3C24XX_SMDK |
1a4c2a19 | 347 | select S3C_DEV_USB_HOST |
85fd6d63 KK |
348 | help |
349 | Say Y here if you are using the SMDK2410 or the derived module A9M2410 | |
350 | <http://www.fsforth.de> | |
351 | ||
352 | config MACH_TCT_HAMMER | |
353 | bool "TCT Hammer Board" | |
354 | select S3C_DEV_USB_HOST | |
355 | help | |
356 | Say Y here if you are using the TinCanTools Hammer Board | |
357 | <http://www.tincantools.com> | |
358 | ||
359 | config MACH_VR1000 | |
360 | bool "Thorcom VR1000" | |
b1b3f49c | 361 | select MACH_BAST_IDE |
85fd6d63 | 362 | select S3C24XX_DCLK |
ec2cc753 | 363 | select S3C24XX_SIMTEC_NOR |
b1b3f49c | 364 | select S3C24XX_SIMTEC_PM if PM |
ec2cc753 | 365 | select S3C24XX_SIMTEC_USB |
b1b3f49c | 366 | select S3C_DEV_USB_HOST |
85fd6d63 KK |
367 | help |
368 | Say Y here if you are using the Thorcom VR1000 board. | |
369 | ||
370 | endif # CPU_S3C2410 | |
371 | ||
85e2a26f KK |
372 | config S3C2412_PM_SLEEP |
373 | bool | |
374 | help | |
375 | Internal config node to apply sleep for S3C2412 power management. | |
376 | Can be selected by another SoCs such as S3C2416 with similar | |
377 | sleep procedure. | |
378 | ||
379 | if CPU_S3C2412 | |
380 | ||
381 | config CPU_S3C2412_ONLY | |
382 | bool | |
383 | depends on ARCH_S3C24XX && !CPU_S3C2410 && \ | |
384 | !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ | |
385 | !CPU_S3C2443 && CPU_S3C2412 | |
386 | default y | |
387 | ||
dbb8fd34 KK |
388 | config S3C2412_CPUFREQ |
389 | bool | |
390 | depends on CPU_FREQ_S3C24XX && CPU_S3C2412 | |
391 | default y | |
392 | select S3C2412_IOTIMING | |
393 | help | |
394 | CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. | |
395 | ||
85e2a26f KK |
396 | config S3C2412_DMA |
397 | bool | |
398 | help | |
399 | Internal config node for S3C2412 DMA support | |
400 | ||
401 | config S3C2412_PM | |
402 | bool | |
7eae354f | 403 | select S3C2412_PM_SLEEP |
85e2a26f KK |
404 | help |
405 | Internal config node to apply S3C2412 power management | |
406 | ||
407 | comment "S3C2412 Boards" | |
408 | ||
409 | # | |
410 | # The "S3C2412 Boards" list is ordered alphabetically by option text. | |
411 | # (without ARCH_ or MACH_) | |
412 | # | |
413 | ||
414 | config MACH_JIVE | |
415 | bool "Logitech Jive" | |
85e2a26f | 416 | select S3C_DEV_NAND |
b1b3f49c | 417 | select S3C_DEV_USB_HOST |
85e2a26f KK |
418 | help |
419 | Say Y here if you are using the Logitech Jive. | |
420 | ||
421 | config MACH_JIVE_SHOW_BOOTLOADER | |
5ec9b067 KC |
422 | bool "Allow access to bootloader partitions in MTD" |
423 | depends on MACH_JIVE | |
85e2a26f KK |
424 | |
425 | config MACH_S3C2413 | |
426 | bool | |
427 | help | |
428 | Internal node for S3C2413 version of SMDK2413, so that | |
429 | machine_is_s3c2413() will work when MACH_SMDK2413 is | |
430 | selected | |
431 | ||
432 | config MACH_SMDK2412 | |
433 | bool "SMDK2412" | |
434 | select MACH_SMDK2413 | |
435 | help | |
436 | Say Y here if you are using an SMDK2412 | |
437 | ||
438 | Note, this shares support with SMDK2413, so will automatically | |
439 | select MACH_SMDK2413. | |
440 | ||
441 | config MACH_SMDK2413 | |
442 | bool "SMDK2413" | |
443 | select MACH_S3C2413 | |
28c569f6 | 444 | select S3C24XX_SMDK |
85e2a26f | 445 | select S3C_DEV_NAND |
b1b3f49c | 446 | select S3C_DEV_USB_HOST |
85e2a26f KK |
447 | help |
448 | Say Y here if you are using an SMDK2413 | |
449 | ||
450 | config MACH_VSTMS | |
451 | bool "VMSTMS" | |
85e2a26f | 452 | select S3C_DEV_NAND |
b1b3f49c | 453 | select S3C_DEV_USB_HOST |
85e2a26f KK |
454 | help |
455 | Say Y here if you are using an VSTMS board | |
456 | ||
457 | endif # CPU_S3C2412 | |
458 | ||
26febf8e KK |
459 | if CPU_S3C2416 |
460 | ||
461 | config S3C2416_PM | |
462 | bool | |
463 | select S3C2412_PM_SLEEP | |
464 | help | |
465 | Internal config node to apply S3C2416 power management | |
466 | ||
467 | config S3C2416_SETUP_SDHCI | |
468 | bool | |
469 | select S3C2416_SETUP_SDHCI_GPIO | |
470 | help | |
471 | Internal helper functions for S3C2416 based SDHCI systems | |
472 | ||
473 | config S3C2416_SETUP_SDHCI_GPIO | |
474 | bool | |
475 | help | |
476 | Common setup code for SDHCI gpio. | |
477 | ||
478 | comment "S3C2416 Boards" | |
479 | ||
480 | config MACH_SMDK2416 | |
481 | bool "SMDK2416" | |
b1b3f49c | 482 | select S3C2416_SETUP_SDHCI |
28c569f6 | 483 | select S3C24XX_SMDK |
26febf8e KK |
484 | select S3C_DEV_FB |
485 | select S3C_DEV_HSMMC | |
486 | select S3C_DEV_HSMMC1 | |
487 | select S3C_DEV_NAND | |
488 | select S3C_DEV_USB_HOST | |
26febf8e KK |
489 | help |
490 | Say Y here if you are using an SMDK2416 | |
491 | ||
492 | endif # CPU_S3C2416 | |
493 | ||
dd6f01b5 KK |
494 | if CPU_S3C2440 |
495 | ||
5aa93c0a KK |
496 | config S3C2440_CPUFREQ |
497 | bool "S3C2440/S3C2442 CPU Frequency scaling support" | |
498 | depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) | |
499 | default y | |
500 | select S3C2410_CPUFREQ_UTILS | |
501 | help | |
502 | CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. | |
503 | ||
dd6f01b5 KK |
504 | config S3C2440_DMA |
505 | bool | |
506 | help | |
507 | Support for S3C2440 specific DMA code5A | |
508 | ||
acf2d41d KK |
509 | config S3C2440_XTAL_12000000 |
510 | bool | |
511 | help | |
512 | Indicate that the build needs to support 12MHz system | |
513 | crystal. | |
514 | ||
515 | config S3C2440_XTAL_16934400 | |
516 | bool | |
517 | help | |
518 | Indicate that the build needs to support 16.9344MHz system | |
519 | crystal. | |
520 | ||
521 | config S3C2440_PLL_12000000 | |
522 | bool | |
523 | depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 | |
524 | default y if CPU_FREQ_S3C24XX_PLL | |
525 | help | |
526 | PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. | |
527 | ||
528 | config S3C2440_PLL_16934400 | |
529 | bool | |
530 | depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 | |
531 | default y if CPU_FREQ_S3C24XX_PLL | |
532 | help | |
533 | PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. | |
534 | ||
dd6f01b5 KK |
535 | comment "S3C2440 Boards" |
536 | ||
537 | # | |
538 | # The "S3C2440 Boards" list is ordered alphabetically by option text. | |
539 | # (without ARCH_ or MACH_) | |
540 | # | |
541 | ||
542 | config MACH_ANUBIS | |
543 | bool "Simtec Electronics ANUBIS" | |
dd6f01b5 | 544 | select HAVE_PATA_PLATFORM |
dd6f01b5 | 545 | select S3C2440_XTAL_12000000 |
b1b3f49c RK |
546 | select S3C24XX_DCLK |
547 | select S3C24XX_GPIO_EXTRA64 | |
548 | select S3C24XX_SIMTEC_PM if PM | |
dd6f01b5 KK |
549 | select S3C_DEV_USB_HOST |
550 | help | |
551 | Say Y here if you are using the Simtec Electronics ANUBIS | |
552 | development system | |
553 | ||
554 | config MACH_AT2440EVB | |
555 | bool "Avantech AT2440EVB development board" | |
dd6f01b5 | 556 | select S3C_DEV_NAND |
b1b3f49c | 557 | select S3C_DEV_USB_HOST |
dd6f01b5 KK |
558 | help |
559 | Say Y here if you are using the AT2440EVB development board | |
560 | ||
561 | config MACH_MINI2440 | |
562 | bool "MINI2440 development board" | |
563 | select EEPROM_AT24 | |
dd6f01b5 | 564 | select LEDS_CLASS |
678a0990 | 565 | select LEDS_TRIGGERS |
dd6f01b5 | 566 | select LEDS_TRIGGER_BACKLIGHT |
b1b3f49c | 567 | select NEW_LEDS |
dd6f01b5 KK |
568 | select S3C_DEV_NAND |
569 | select S3C_DEV_USB_HOST | |
e51d5486 | 570 | select S3C_SETUP_CAMIF |
dd6f01b5 KK |
571 | help |
572 | Say Y here to select support for the MINI2440. Is a 10cm x 10cm board | |
573 | available via various sources. It can come with a 3.5" or 7" touch LCD. | |
574 | ||
575 | config MACH_NEXCODER_2440 | |
576 | bool "NexVision NEXCODER 2440 Light Board" | |
577 | select S3C2440_XTAL_12000000 | |
dd6f01b5 | 578 | select S3C_DEV_NAND |
b1b3f49c | 579 | select S3C_DEV_USB_HOST |
dd6f01b5 KK |
580 | help |
581 | Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board | |
582 | ||
583 | config MACH_OSIRIS | |
584 | bool "Simtec IM2440D20 (OSIRIS) module" | |
b1b3f49c RK |
585 | select S3C2410_IOTIMING if S3C2440_CPUFREQ |
586 | select S3C2440_XTAL_12000000 | |
dd6f01b5 | 587 | select S3C24XX_DCLK |
dd6f01b5 | 588 | select S3C24XX_GPIO_EXTRA128 |
b1b3f49c | 589 | select S3C24XX_SIMTEC_PM if PM |
dd6f01b5 | 590 | select S3C_DEV_NAND |
b1b3f49c | 591 | select S3C_DEV_USB_HOST |
dd6f01b5 KK |
592 | help |
593 | Say Y here if you are using the Simtec IM2440D20 module, also | |
594 | known as the Osiris. | |
595 | ||
596 | config MACH_OSIRIS_DVS | |
597 | tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" | |
598 | depends on MACH_OSIRIS | |
599 | select TPS65010 | |
600 | help | |
601 | Say Y/M here if you want to have dynamic voltage scaling support | |
602 | on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. | |
603 | ||
604 | The DVS driver alters the voltage supplied to the ARM core | |
605 | depending on the frequency it is running at. The driver itself | |
606 | does not do any of the frequency alteration, which is left up | |
607 | to the cpufreq driver. | |
608 | ||
609 | config MACH_RX3715 | |
610 | bool "HP iPAQ rx3715" | |
dd6f01b5 | 611 | select PM_H1940 if PM |
b1b3f49c | 612 | select S3C2440_XTAL_16934400 |
dd6f01b5 KK |
613 | select S3C_DEV_NAND |
614 | help | |
615 | Say Y here if you are using the HP iPAQ rx3715. | |
616 | ||
617 | config ARCH_S3C2440 | |
618 | bool "SMDK2440" | |
619 | select S3C2440_XTAL_16934400 | |
28c569f6 | 620 | select S3C24XX_SMDK |
dd6f01b5 | 621 | select S3C_DEV_NAND |
b1b3f49c | 622 | select S3C_DEV_USB_HOST |
dd6f01b5 KK |
623 | help |
624 | Say Y here if you are using the SMDK2440. | |
625 | ||
626 | config SMDK2440_CPU2440 | |
627 | bool "SMDK2440 with S3C2440 CPU module" | |
628 | default y if ARCH_S3C2440 | |
629 | select S3C2440_XTAL_16934400 | |
630 | ||
631 | endif # CPU_S3C2440 | |
632 | ||
633 | if CPU_S3C2442 | |
634 | ||
635 | comment "S3C2442 Boards" | |
636 | ||
637 | # | |
638 | # The "S3C2442 Boards" list is ordered alphabetically by option text. | |
639 | # (without ARCH_ or MACH_) | |
640 | # | |
641 | ||
642 | config MACH_NEO1973_GTA02 | |
643 | bool "Openmoko GTA02 / Freerunner phone" | |
b1b3f49c RK |
644 | select I2C |
645 | select MACH_NEO1973 | |
dd6f01b5 KK |
646 | select MFD_PCF50633 |
647 | select PCF50633_GPIO | |
dd6f01b5 | 648 | select POWER_SUPPLY |
35e79061 | 649 | select S3C24XX_PWM |
dd6f01b5 KK |
650 | select S3C_DEV_USB_HOST |
651 | help | |
652 | Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone | |
653 | ||
654 | config MACH_RX1950 | |
655 | bool "HP iPAQ rx1950" | |
dd6f01b5 | 656 | select I2C |
b1b3f49c | 657 | select PM_H1940 if PM |
dd6f01b5 KK |
658 | select S3C2410_IOTIMING if S3C2440_CPUFREQ |
659 | select S3C2440_XTAL_16934400 | |
b1b3f49c RK |
660 | select S3C24XX_DCLK |
661 | select S3C24XX_PWM | |
662 | select S3C_DEV_NAND | |
dd6f01b5 KK |
663 | help |
664 | Say Y here if you're using HP iPAQ rx1950 | |
665 | ||
666 | config SMDK2440_CPU2442 | |
667 | bool "SMDM2440 with S3C2442 CPU module" | |
668 | ||
669 | endif # CPU_S3C2440 | |
670 | ||
8c3d7c30 HS |
671 | if CPU_S3C2443 || CPU_S3C2416 |
672 | ||
673 | config S3C2443_COMMON | |
674 | bool | |
675 | help | |
676 | Common code for the S3C2443 and similar processors, which includes | |
677 | the S3C2416 and S3C2450. | |
678 | ||
84c028b9 KK |
679 | config S3C2443_DMA |
680 | bool | |
681 | help | |
682 | Internal config node for S3C2443 DMA support | |
683 | ||
f03eb25e HS |
684 | config S3C2443_SETUP_SPI |
685 | bool | |
686 | help | |
687 | Common setup code for SPI GPIO configurations | |
688 | ||
46cdaba1 HS |
689 | endif # CPU_S3C2443 || CPU_S3C2416 |
690 | ||
691 | if CPU_S3C2443 | |
692 | ||
84c028b9 KK |
693 | comment "S3C2443 Boards" |
694 | ||
695 | config MACH_SMDK2443 | |
696 | bool "SMDK2443" | |
28c569f6 | 697 | select S3C24XX_SMDK |
84c028b9 KK |
698 | select S3C_DEV_HSMMC1 |
699 | help | |
700 | Say Y here if you are using an SMDK2443 | |
701 | ||
702 | endif # CPU_S3C2443 | |
703 | ||
85fd6d63 KK |
704 | endmenu # SAMSUNG S3C24XX SoCs Support |
705 | ||
706 | endif # ARCH_S3C24XX |