Commit | Line | Data |
---|---|---|
9d76295a | 1 | /* |
9d76295a AG |
2 | * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. |
3 | * | |
4 | * Copyright (C) 2006-2009 by Openmoko, Inc. | |
5 | * Authors: Harald Welte <laforge@openmoko.org> | |
6 | * Andy Green <andy@openmoko.org> | |
7 | * Werner Almesberger <werner@openmoko.org> | |
8 | * All rights reserved. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License as | |
12 | * published by the Free Software Foundation; either version 2 of | |
13 | * the License, or (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
23 | * MA 02111-1307 USA | |
9d76295a AG |
24 | */ |
25 | ||
26 | #include <linux/kernel.h> | |
27 | #include <linux/types.h> | |
28 | #include <linux/interrupt.h> | |
29 | #include <linux/list.h> | |
30 | #include <linux/delay.h> | |
31 | #include <linux/timer.h> | |
32 | #include <linux/init.h> | |
33 | #include <linux/gpio.h> | |
b2ca7871 | 34 | #include <linux/gpio_keys.h> |
9d76295a AG |
35 | #include <linux/workqueue.h> |
36 | #include <linux/platform_device.h> | |
37 | #include <linux/serial_core.h> | |
b2ca7871 KK |
38 | #include <linux/input.h> |
39 | #include <linux/io.h> | |
40 | #include <linux/i2c.h> | |
9d76295a AG |
41 | |
42 | #include <linux/mmc/host.h> | |
43 | ||
b2ca7871 KK |
44 | #include <linux/mfd/pcf50633/adc.h> |
45 | #include <linux/mfd/pcf50633/backlight.h> | |
46 | #include <linux/mfd/pcf50633/core.h> | |
47 | #include <linux/mfd/pcf50633/gpio.h> | |
48 | #include <linux/mfd/pcf50633/mbc.h> | |
49 | #include <linux/mfd/pcf50633/pmic.h> | |
50 | ||
9d76295a AG |
51 | #include <linux/mtd/mtd.h> |
52 | #include <linux/mtd/nand.h> | |
53 | #include <linux/mtd/nand_ecc.h> | |
54 | #include <linux/mtd/partitions.h> | |
55 | #include <linux/mtd/physmap.h> | |
9d76295a | 56 | |
9d76295a AG |
57 | #include <linux/regulator/machine.h> |
58 | ||
b2ca7871 KK |
59 | #include <linux/spi/spi.h> |
60 | #include <linux/spi/s3c24xx.h> | |
003ddede | 61 | |
b2ca7871 KK |
62 | #include <asm/irq.h> |
63 | #include <asm/mach-types.h> | |
9d76295a AG |
64 | #include <asm/mach/arch.h> |
65 | #include <asm/mach/map.h> | |
66 | #include <asm/mach/irq.h> | |
67 | ||
b2ca7871 KK |
68 | #include <linux/platform_data/i2c-s3c2410.h> |
69 | #include <linux/platform_data/mtd-nand-s3c2410.h> | |
70 | #include <linux/platform_data/touchscreen-s3c2410.h> | |
71 | #include <linux/platform_data/usb-ohci-s3c2410.h> | |
72 | #include <linux/platform_data/usb-s3c2410_udc.h> | |
9d76295a | 73 | |
9d76295a | 74 | #include <mach/fb.h> |
9d76295a | 75 | #include <mach/hardware.h> |
b2ca7871 KK |
76 | #include <mach/regs-gpio.h> |
77 | #include <mach/regs-irq.h> | |
9d76295a | 78 | |
9d76295a | 79 | #include <plat/cpu.h> |
b2ca7871 | 80 | #include <plat/devs.h> |
9d76295a | 81 | #include <plat/gpio-cfg.h> |
b2ca7871 KK |
82 | #include <plat/pm.h> |
83 | #include <plat/regs-serial.h> | |
d73af183 | 84 | |
b27b0727 | 85 | #include "common.h" |
b2ca7871 | 86 | #include "gta02.h" |
9d76295a AG |
87 | |
88 | static struct pcf50633 *gta02_pcf; | |
89 | ||
90 | /* | |
c7ff0d9c | 91 | * This gets called frequently when we paniced. |
9d76295a AG |
92 | */ |
93 | ||
c7ff0d9c | 94 | static long gta02_panic_blink(int state) |
9d76295a AG |
95 | { |
96 | long delay = 0; | |
c7ff0d9c | 97 | char led; |
9d76295a | 98 | |
c7ff0d9c | 99 | led = (state) ? 1 : 0; |
9d76295a AG |
100 | gpio_direction_output(GTA02_GPIO_AUX_LED, led); |
101 | ||
9d76295a AG |
102 | return delay; |
103 | } | |
104 | ||
105 | ||
106 | static struct map_desc gta02_iodesc[] __initdata = { | |
107 | { | |
108 | .virtual = 0xe0000000, | |
109 | .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000), | |
110 | .length = SZ_1M, | |
111 | .type = MT_DEVICE | |
112 | }, | |
113 | }; | |
114 | ||
115 | #define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN) | |
116 | #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) | |
117 | #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) | |
118 | ||
119 | static struct s3c2410_uartcfg gta02_uartcfgs[] = { | |
120 | [0] = { | |
121 | .hwport = 0, | |
122 | .flags = 0, | |
123 | .ucon = UCON, | |
124 | .ulcon = ULCON, | |
125 | .ufcon = UFCON, | |
126 | }, | |
127 | [1] = { | |
128 | .hwport = 1, | |
129 | .flags = 0, | |
130 | .ucon = UCON, | |
131 | .ulcon = ULCON, | |
132 | .ufcon = UFCON, | |
133 | }, | |
134 | [2] = { | |
135 | .hwport = 2, | |
136 | .flags = 0, | |
137 | .ucon = UCON, | |
138 | .ulcon = ULCON, | |
139 | .ufcon = UFCON, | |
140 | }, | |
141 | }; | |
142 | ||
143 | #ifdef CONFIG_CHARGER_PCF50633 | |
144 | /* | |
145 | * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin. | |
146 | * We use this to recognize that we can pull 1A from the USB socket. | |
147 | * | |
148 | * These constants are the measured pcf50633 ADC levels with the 1A | |
149 | * charger / 48K resistor, and with no pulldown resistor. | |
150 | */ | |
151 | ||
152 | #define ADC_NOM_CHG_DETECT_1A 6 | |
153 | #define ADC_NOM_CHG_DETECT_USB 43 | |
154 | ||
155 | static void | |
156 | gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res) | |
157 | { | |
158 | int ma; | |
159 | ||
160 | /* Interpret charger type */ | |
161 | if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) { | |
162 | ||
163 | /* | |
164 | * Sanity - stop GPO driving out now that we have a 1A charger | |
165 | * GPO controls USB Host power generation on GTA02 | |
166 | */ | |
167 | pcf50633_gpio_set(pcf, PCF50633_GPO, 0); | |
168 | ||
169 | ma = 1000; | |
170 | } else | |
171 | ma = 100; | |
172 | ||
173 | pcf50633_mbc_usb_curlim_set(pcf, ma); | |
174 | } | |
175 | ||
176 | static struct delayed_work gta02_charger_work; | |
177 | static int gta02_usb_vbus_draw; | |
178 | ||
179 | static void gta02_charger_worker(struct work_struct *work) | |
180 | { | |
181 | if (gta02_usb_vbus_draw) { | |
182 | pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw); | |
183 | return; | |
184 | } | |
185 | ||
186 | #ifdef CONFIG_PCF50633_ADC | |
187 | pcf50633_adc_async_read(gta02_pcf, | |
188 | PCF50633_ADCC1_MUX_ADCIN1, | |
189 | PCF50633_ADCC1_AVERAGE_16, | |
190 | gta02_configure_pmu_for_charger, | |
191 | NULL); | |
192 | #else | |
193 | /* | |
194 | * If the PCF50633 ADC is disabled we fallback to a | |
195 | * 100mA limit for safety. | |
196 | */ | |
197 | pcf50633_mbc_usb_curlim_set(pcf, 100); | |
198 | #endif | |
199 | } | |
200 | ||
201 | #define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000) | |
202 | ||
203 | static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq) | |
204 | { | |
205 | if (irq == PCF50633_IRQ_USBINS) { | |
206 | schedule_delayed_work(>a02_charger_work, | |
207 | GTA02_CHARGER_CONFIGURE_TIMEOUT); | |
208 | ||
209 | return; | |
210 | } | |
211 | ||
212 | if (irq == PCF50633_IRQ_USBREM) { | |
213 | cancel_delayed_work_sync(>a02_charger_work); | |
214 | gta02_usb_vbus_draw = 0; | |
215 | } | |
216 | } | |
217 | ||
218 | static void gta02_udc_vbus_draw(unsigned int ma) | |
219 | { | |
220 | if (!gta02_pcf) | |
221 | return; | |
222 | ||
223 | gta02_usb_vbus_draw = ma; | |
224 | ||
225 | schedule_delayed_work(>a02_charger_work, | |
226 | GTA02_CHARGER_CONFIGURE_TIMEOUT); | |
227 | } | |
228 | #else /* !CONFIG_CHARGER_PCF50633 */ | |
229 | #define gta02_pmu_event_callback NULL | |
230 | #define gta02_udc_vbus_draw NULL | |
231 | #endif | |
232 | ||
233 | /* | |
234 | * This is called when pc50633 is probed, unfortunately quite late in the | |
235 | * day since it is an I2C bus device. Here we can belatedly define some | |
236 | * platform devices with the advantage that we can mark the pcf50633 as the | |
237 | * parent. This makes them get suspended and resumed with their parent | |
238 | * the pcf50633 still around. | |
239 | */ | |
240 | ||
241 | static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf); | |
242 | ||
243 | ||
244 | static char *gta02_batteries[] = { | |
245 | "battery", | |
246 | }; | |
247 | ||
67e67df8 LPC |
248 | static struct pcf50633_bl_platform_data gta02_backlight_data = { |
249 | .default_brightness = 0x3f, | |
250 | .default_brightness_limit = 0, | |
251 | .ramp_time = 5, | |
252 | }; | |
253 | ||
4cfb7b7c | 254 | static struct pcf50633_platform_data gta02_pcf_pdata = { |
9d76295a AG |
255 | .resumers = { |
256 | [0] = PCF50633_INT1_USBINS | | |
257 | PCF50633_INT1_USBREM | | |
258 | PCF50633_INT1_ALARM, | |
259 | [1] = PCF50633_INT2_ONKEYF, | |
260 | [2] = PCF50633_INT3_ONKEY1S, | |
261 | [3] = PCF50633_INT4_LOWSYS | | |
262 | PCF50633_INT4_LOWBAT | | |
263 | PCF50633_INT4_HIGHTMP, | |
264 | }, | |
265 | ||
266 | .batteries = gta02_batteries, | |
267 | .num_batteries = ARRAY_SIZE(gta02_batteries), | |
2f745dde LPC |
268 | |
269 | .charger_reference_current_ma = 1000, | |
270 | ||
67e67df8 LPC |
271 | .backlight_data = >a02_backlight_data, |
272 | ||
9d76295a AG |
273 | .reg_init_data = { |
274 | [PCF50633_REGULATOR_AUTO] = { | |
275 | .constraints = { | |
276 | .min_uV = 3300000, | |
277 | .max_uV = 3300000, | |
278 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
279 | .always_on = 1, | |
280 | .apply_uV = 1, | |
9d76295a AG |
281 | }, |
282 | }, | |
283 | [PCF50633_REGULATOR_DOWN1] = { | |
284 | .constraints = { | |
285 | .min_uV = 1300000, | |
286 | .max_uV = 1600000, | |
287 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
288 | .always_on = 1, | |
289 | .apply_uV = 1, | |
290 | }, | |
291 | }, | |
292 | [PCF50633_REGULATOR_DOWN2] = { | |
293 | .constraints = { | |
294 | .min_uV = 1800000, | |
295 | .max_uV = 1800000, | |
296 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
297 | .apply_uV = 1, | |
298 | .always_on = 1, | |
9d76295a AG |
299 | }, |
300 | }, | |
301 | [PCF50633_REGULATOR_HCLDO] = { | |
302 | .constraints = { | |
303 | .min_uV = 2000000, | |
304 | .max_uV = 3300000, | |
305 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
7cda3440 LPC |
306 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
307 | REGULATOR_CHANGE_STATUS, | |
9d76295a AG |
308 | }, |
309 | }, | |
310 | [PCF50633_REGULATOR_LDO1] = { | |
311 | .constraints = { | |
312 | .min_uV = 3300000, | |
313 | .max_uV = 3300000, | |
314 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
7cda3440 | 315 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
9d76295a | 316 | .apply_uV = 1, |
9d76295a AG |
317 | }, |
318 | }, | |
319 | [PCF50633_REGULATOR_LDO2] = { | |
320 | .constraints = { | |
321 | .min_uV = 3300000, | |
322 | .max_uV = 3300000, | |
323 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
324 | .apply_uV = 1, | |
325 | }, | |
326 | }, | |
327 | [PCF50633_REGULATOR_LDO3] = { | |
328 | .constraints = { | |
329 | .min_uV = 3000000, | |
330 | .max_uV = 3000000, | |
331 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
332 | .apply_uV = 1, | |
333 | }, | |
334 | }, | |
335 | [PCF50633_REGULATOR_LDO4] = { | |
336 | .constraints = { | |
337 | .min_uV = 3200000, | |
338 | .max_uV = 3200000, | |
339 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
7cda3440 | 340 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
9d76295a AG |
341 | .apply_uV = 1, |
342 | }, | |
343 | }, | |
344 | [PCF50633_REGULATOR_LDO5] = { | |
345 | .constraints = { | |
346 | .min_uV = 3000000, | |
347 | .max_uV = 3000000, | |
348 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
7cda3440 | 349 | .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
9d76295a | 350 | .apply_uV = 1, |
9d76295a AG |
351 | }, |
352 | }, | |
353 | [PCF50633_REGULATOR_LDO6] = { | |
354 | .constraints = { | |
355 | .min_uV = 3000000, | |
356 | .max_uV = 3000000, | |
357 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
358 | }, | |
359 | }, | |
360 | [PCF50633_REGULATOR_MEMLDO] = { | |
361 | .constraints = { | |
362 | .min_uV = 1800000, | |
363 | .max_uV = 1800000, | |
364 | .valid_modes_mask = REGULATOR_MODE_NORMAL, | |
9d76295a AG |
365 | }, |
366 | }, | |
367 | ||
368 | }, | |
369 | .probe_done = gta02_pmu_attach_child_devices, | |
370 | .mbc_event_callback = gta02_pmu_event_callback, | |
371 | }; | |
372 | ||
373 | ||
374 | /* NOR Flash. */ | |
375 | ||
376 | #define GTA02_FLASH_BASE 0x18000000 /* GCS3 */ | |
377 | #define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */ | |
378 | ||
379 | static struct physmap_flash_data gta02_nor_flash_data = { | |
380 | .width = 2, | |
381 | }; | |
382 | ||
1c2bf1d3 TB |
383 | static struct resource gta02_nor_flash_resource = |
384 | DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE); | |
9d76295a AG |
385 | |
386 | static struct platform_device gta02_nor_flash = { | |
387 | .name = "physmap-flash", | |
388 | .id = 0, | |
389 | .dev = { | |
390 | .platform_data = >a02_nor_flash_data, | |
391 | }, | |
392 | .resource = >a02_nor_flash_resource, | |
393 | .num_resources = 1, | |
394 | }; | |
395 | ||
396 | ||
4cfb7b7c | 397 | static struct platform_device s3c24xx_pwm_device = { |
9d76295a AG |
398 | .name = "s3c24xx_pwm", |
399 | .num_resources = 0, | |
400 | }; | |
401 | ||
6caa15d0 LPC |
402 | static struct platform_device gta02_dfbmcs320_device = { |
403 | .name = "dfbmcs320", | |
404 | }; | |
405 | ||
9d76295a AG |
406 | static struct i2c_board_info gta02_i2c_devs[] __initdata = { |
407 | { | |
408 | I2C_BOARD_INFO("pcf50633", 0x73), | |
409 | .irq = GTA02_IRQ_PCF50633, | |
410 | .platform_data = >a02_pcf_pdata, | |
411 | }, | |
412 | { | |
413 | I2C_BOARD_INFO("wm8753", 0x1a), | |
414 | }, | |
415 | }; | |
416 | ||
2a3a1804 | 417 | static struct s3c2410_nand_set __initdata gta02_nand_sets[] = { |
9d76295a AG |
418 | [0] = { |
419 | /* | |
420 | * This name is also hard-coded in the boot loaders, so | |
421 | * changing it would would require all users to upgrade | |
422 | * their boot loaders, some of which are stored in a NOR | |
423 | * that is considered to be immutable. | |
424 | */ | |
425 | .name = "neo1973-nand", | |
426 | .nr_chips = 1, | |
76609a69 | 427 | .flash_bbt = 1, |
9d76295a AG |
428 | }, |
429 | }; | |
430 | ||
431 | /* | |
432 | * Choose a set of timings derived from S3C@2442B MCP54 | |
433 | * data sheet (K5D2G13ACM-D075 MCP Memory). | |
434 | */ | |
435 | ||
2a3a1804 | 436 | static struct s3c2410_platform_nand __initdata gta02_nand_info = { |
9d76295a AG |
437 | .tacls = 0, |
438 | .twrph0 = 25, | |
439 | .twrph1 = 15, | |
440 | .nr_sets = ARRAY_SIZE(gta02_nand_sets), | |
441 | .sets = gta02_nand_sets, | |
442 | }; | |
443 | ||
444 | ||
9d76295a | 445 | /* Get PMU to set USB current limit accordingly. */ |
e27c3c5c | 446 | static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { |
9d76295a | 447 | .vbus_draw = gta02_udc_vbus_draw, |
e27c3c5c | 448 | .pullup_pin = GTA02_GPIO_USB_PULLUP, |
9d76295a AG |
449 | }; |
450 | ||
9d76295a | 451 | /* USB */ |
f1267520 | 452 | static struct s3c2410_hcd_info gta02_usb_info __initdata = { |
9d76295a AG |
453 | .port[0] = { |
454 | .flags = S3C_HCDFLG_USED, | |
455 | }, | |
456 | .port[1] = { | |
457 | .flags = 0, | |
458 | }, | |
459 | }; | |
460 | ||
d73af183 LPC |
461 | /* Touchscreen */ |
462 | static struct s3c2410_ts_mach_info gta02_ts_info = { | |
463 | .delay = 10000, | |
464 | .presc = 0xff, /* slow as we can go */ | |
465 | .oversampling_shift = 2, | |
466 | }; | |
467 | ||
003ddede LPC |
468 | /* Buttons */ |
469 | static struct gpio_keys_button gta02_buttons[] = { | |
470 | { | |
471 | .gpio = GTA02_GPIO_AUX_KEY, | |
472 | .code = KEY_PHONE, | |
473 | .desc = "Aux", | |
474 | .type = EV_KEY, | |
475 | .debounce_interval = 100, | |
476 | }, | |
477 | { | |
478 | .gpio = GTA02_GPIO_HOLD_KEY, | |
479 | .code = KEY_PAUSE, | |
480 | .desc = "Hold", | |
481 | .type = EV_KEY, | |
482 | .debounce_interval = 100, | |
483 | }, | |
484 | }; | |
485 | ||
486 | static struct gpio_keys_platform_data gta02_buttons_pdata = { | |
487 | .buttons = gta02_buttons, | |
488 | .nbuttons = ARRAY_SIZE(gta02_buttons), | |
489 | }; | |
490 | ||
491 | static struct platform_device gta02_buttons_device = { | |
492 | .name = "gpio-keys", | |
493 | .id = -1, | |
494 | .dev = { | |
495 | .platform_data = >a02_buttons_pdata, | |
496 | }, | |
497 | }; | |
9d76295a AG |
498 | |
499 | static void __init gta02_map_io(void) | |
500 | { | |
501 | s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); | |
502 | s3c24xx_init_clocks(12000000); | |
503 | s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); | |
504 | } | |
505 | ||
506 | ||
507 | /* These are the guys that don't need to be children of PMU. */ | |
508 | ||
509 | static struct platform_device *gta02_devices[] __initdata = { | |
b813248c | 510 | &s3c_device_ohci, |
9d76295a AG |
511 | &s3c_device_wdt, |
512 | &s3c_device_sdi, | |
513 | &s3c_device_usbgadget, | |
514 | &s3c_device_nand, | |
515 | >a02_nor_flash, | |
516 | &s3c24xx_pwm_device, | |
517 | &s3c_device_iis, | |
518 | &s3c_device_i2c0, | |
6caa15d0 | 519 | >a02_dfbmcs320_device, |
003ddede | 520 | >a02_buttons_device, |
d73af183 LPC |
521 | &s3c_device_adc, |
522 | &s3c_device_ts, | |
9d76295a AG |
523 | }; |
524 | ||
525 | /* These guys DO need to be children of PMU. */ | |
526 | ||
527 | static struct platform_device *gta02_devices_pmu_children[] = { | |
9d76295a AG |
528 | }; |
529 | ||
530 | ||
531 | /* | |
532 | * This is called when pc50633 is probed, quite late in the day since it is an | |
533 | * I2C bus device. Here we can define platform devices with the advantage that | |
534 | * we can mark the pcf50633 as the parent. This makes them get suspended and | |
535 | * resumed with their parent the pcf50633 still around. All devices whose | |
536 | * operation depends on something from pcf50633 must have this relationship | |
537 | * made explicit like this, or suspend and resume will become an unreliable | |
538 | * hellworld. | |
539 | */ | |
540 | ||
541 | static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf) | |
542 | { | |
543 | int n; | |
544 | ||
545 | /* Grab a copy of the now probed PMU pointer. */ | |
546 | gta02_pcf = pcf; | |
547 | ||
548 | for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++) | |
549 | gta02_devices_pmu_children[n]->dev.parent = pcf->dev; | |
550 | ||
551 | platform_add_devices(gta02_devices_pmu_children, | |
552 | ARRAY_SIZE(gta02_devices_pmu_children)); | |
553 | } | |
554 | ||
555 | static void gta02_poweroff(void) | |
556 | { | |
557 | pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1); | |
558 | } | |
559 | ||
560 | static void __init gta02_machine_init(void) | |
561 | { | |
c7ff0d9c | 562 | /* Set the panic callback to turn AUX LED on or off. */ |
9d76295a AG |
563 | panic_blink = gta02_panic_blink; |
564 | ||
565 | s3c_pm_init(); | |
566 | ||
567 | #ifdef CONFIG_CHARGER_PCF50633 | |
568 | INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker); | |
569 | #endif | |
570 | ||
9d76295a | 571 | s3c24xx_udc_set_platdata(>a02_udc_cfg); |
d73af183 | 572 | s3c24xx_ts_set_platdata(>a02_ts_info); |
f1267520 | 573 | s3c_ohci_set_platdata(>a02_usb_info); |
2a3a1804 | 574 | s3c_nand_set_platdata(>a02_nand_info); |
9d76295a AG |
575 | s3c_i2c0_set_platdata(NULL); |
576 | ||
577 | i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs)); | |
578 | ||
579 | platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); | |
580 | pm_power_off = gta02_poweroff; | |
3c861b88 LPC |
581 | |
582 | regulator_has_full_constraints(); | |
9d76295a AG |
583 | } |
584 | ||
585 | ||
586 | MACHINE_START(NEO1973_GTA02, "GTA02") | |
587 | /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ | |
69d50710 | 588 | .atag_offset = 0x100, |
9d76295a AG |
589 | .map_io = gta02_map_io, |
590 | .init_irq = s3c24xx_init_irq, | |
591 | .init_machine = gta02_machine_init, | |
6bb27d73 | 592 | .init_time = s3c24xx_timer_init, |
c1ba544f | 593 | .restart = s3c244x_restart, |
9d76295a | 594 | MACHINE_END |