Commit | Line | Data |
---|---|---|
a08ab637 | 1 | # Copyright 2008 Openmoko, Inc. |
431107ea | 2 | # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> |
a08ab637 BD |
3 | # |
4 | # Licensed under GPLv2 | |
5 | ||
110d85ac BD |
6 | # temporary until we can eliminate all drivers using it. |
7 | config PLAT_S3C64XX | |
8 | bool | |
9 | depends on ARCH_S3C64XX | |
fda22577 | 10 | select SAMSUNG_WAKEMASK |
110d85ac BD |
11 | default y |
12 | help | |
13 | Base platform code for any Samsung S3C64XX device | |
14 | ||
15 | ||
a08ab637 | 16 | # Configuration options for the S3C6410 CPU |
d626aeed | 17 | |
431107ea BD |
18 | config CPU_S3C6400 |
19 | bool | |
431107ea BD |
20 | help |
21 | Enable S3C6400 CPU support | |
22 | ||
d626aeed BD |
23 | config CPU_S3C6410 |
24 | bool | |
25 | help | |
26 | Enable S3C6410 CPU support | |
27 | ||
f7be9aba BD |
28 | config S3C64XX_DMA |
29 | bool "S3C64XX DMA" | |
30 | select S3C_DMA | |
31 | ||
2f6c2ac1 | 32 | config S3C64XX_SETUP_SDHCI |
4faf6867 | 33 | select S3C64XX_SETUP_SDHCI_GPIO |
2f6c2ac1 | 34 | bool |
5cc7fd88 | 35 | help |
2f6c2ac1 BD |
36 | Internal configuration for default SDHCI setup for S3C6400 and |
37 | S3C6410 SoCs. | |
5cc7fd88 | 38 | |
999304be MS |
39 | config S3C64XX_DEV_ONENAND1 |
40 | bool | |
41 | help | |
42 | Compile in platform device definition for OneNAND1 controller | |
43 | ||
88fc68a2 BD |
44 | # platform specific device setup |
45 | ||
46 | config S3C64XX_SETUP_I2C0 | |
47 | bool | |
48 | default y | |
49 | help | |
50 | Common setup code for i2c bus 0. | |
51 | ||
52 | Note, currently since i2c0 is always compiled, this setup helper | |
53 | is always compiled with it. | |
54 | ||
55 | config S3C64XX_SETUP_I2C1 | |
56 | bool | |
57 | help | |
58 | Common setup code for i2c bus 1. | |
59 | ||
0ab0b6d2 AK |
60 | config S3C64XX_SETUP_IDE |
61 | bool | |
62 | help | |
63 | Common setup code for S3C64XX IDE. | |
64 | ||
88fc68a2 BD |
65 | config S3C64XX_SETUP_FB_24BPP |
66 | bool | |
67 | help | |
68 | Common setup code for S3C64XX with an 24bpp RGB display helper. | |
69 | ||
290d0983 NKC |
70 | config S3C64XX_SETUP_KEYPAD |
71 | bool | |
72 | help | |
73 | Common setup code for S3C64XX KEYPAD GPIO configurations | |
74 | ||
88fc68a2 BD |
75 | config S3C64XX_SETUP_SDHCI_GPIO |
76 | bool | |
77 | help | |
78 | Common setup code for S3C64XX SDHCI GPIO configurations | |
79 | ||
431107ea BD |
80 | # S36400 Macchine support |
81 | ||
82 | config MACH_SMDK6400 | |
83 | bool "SMDK6400" | |
84 | select CPU_S3C6400 | |
85 | select S3C_DEV_HSMMC | |
86 | select S3C_DEV_NAND | |
2f6c2ac1 | 87 | select S3C64XX_SETUP_SDHCI |
431107ea BD |
88 | help |
89 | Machine support for the Samsung SMDK6400 | |
90 | ||
91 | # S3C6410 machine support | |
92 | ||
1f26a8a0 KL |
93 | config MACH_ANW6410 |
94 | bool "A&W6410" | |
95 | select CPU_S3C6410 | |
96 | select S3C_DEV_FB | |
97 | select S3C64XX_SETUP_FB_24BPP | |
98 | help | |
99 | Machine support for the A&W6410 | |
100 | ||
eab5cfa0 DA |
101 | config MACH_REAL6410 |
102 | bool "REAL6410" | |
103 | select CPU_S3C6410 | |
ce611d7b DA |
104 | select S3C_DEV_HSMMC |
105 | select S3C_DEV_HSMMC1 | |
106 | select S3C64XX_SETUP_SDHCI | |
c115f67c DA |
107 | select S3C_DEV_FB |
108 | select S3C64XX_SETUP_FB_24BPP | |
88fbadea | 109 | select S3C_DEV_NAND |
eab5cfa0 DA |
110 | help |
111 | Machine support for the CoreWind REAL6410 | |
112 | ||
5718df9d BD |
113 | config MACH_SMDK6410 |
114 | bool "SMDK6410" | |
115 | select CPU_S3C6410 | |
4f7cdc38 | 116 | select SAMSUNG_DEV_ADC |
5b323c7b | 117 | select S3C_DEV_HSMMC |
b24636cf | 118 | select S3C_DEV_HSMMC1 |
d7ea3743 | 119 | select S3C_DEV_I2C1 |
0ab0b6d2 | 120 | select SAMSUNG_DEV_IDE |
438a5d42 | 121 | select S3C_DEV_FB |
9bbf4a63 | 122 | select S3C_DEV_RTC |
85b14a3f | 123 | select SAMSUNG_DEV_TS |
98fd63ba | 124 | select S3C_DEV_USB_HOST |
06fa1d37 | 125 | select S3C_DEV_USB_HSOTG |
b351c4a1 | 126 | select S3C_DEV_WDT |
290d0983 | 127 | select SAMSUNG_DEV_KEYPAD |
b351c4a1 | 128 | select HAVE_S3C2410_WATCHDOG |
2f6c2ac1 | 129 | select S3C64XX_SETUP_SDHCI |
d7ea3743 | 130 | select S3C64XX_SETUP_I2C1 |
0ab0b6d2 | 131 | select S3C64XX_SETUP_IDE |
438a5d42 | 132 | select S3C64XX_SETUP_FB_24BPP |
290d0983 | 133 | select S3C64XX_SETUP_KEYPAD |
5718df9d BD |
134 | help |
135 | Machine support for the Samsung SMDK6410 | |
b24636cf BD |
136 | |
137 | # At least some of the SMDK6410s were shipped with the card detect | |
138 | # for the MMC/SD slots connected to the same input. This means that | |
139 | # either the boards need to be altered to have channel0 to an alternate | |
140 | # configuration or that only one slot can be used. | |
141 | ||
142 | choice | |
143 | prompt "SMDK6410 MMC/SD slot setup" | |
144 | depends on MACH_SMDK6410 | |
145 | ||
146 | config SMDK6410_SD_CH0 | |
147 | bool "Use channel 0 only" | |
148 | depends on MACH_SMDK6410 | |
149 | help | |
150 | Select CON7 (channel 0) as the MMC/SD slot, as | |
151 | at least some SMDK6410 boards come with the | |
152 | resistors fitted so that the card detects for | |
153 | channels 0 and 1 are the same. | |
431107ea | 154 | |
b24636cf BD |
155 | config SMDK6410_SD_CH1 |
156 | bool "Use channel 1 only" | |
157 | depends on MACH_SMDK6410 | |
158 | help | |
159 | Select CON6 (channel 1) as the MMC/SD slot, as | |
160 | at least some SMDK6410 boards come with the | |
161 | resistors fitted so that the card detects for | |
162 | channels 0 and 1 are the same. | |
163 | ||
164 | endchoice | |
ecc558ac MB |
165 | |
166 | config SMDK6410_WM1190_EV1 | |
167 | bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" | |
168 | depends on MACH_SMDK6410 | |
169 | select REGULATOR | |
170 | select REGULATOR_WM8350 | |
c7a19787 | 171 | select S3C24XX_GPIO_EXTRA64 |
ecc558ac MB |
172 | select MFD_WM8350_I2C |
173 | select MFD_WM8350_CONFIG_MODE_0 | |
174 | select MFD_WM8350_CONFIG_MODE_3 | |
175 | select MFD_WM8352_CONFIG_MODE_0 | |
176 | help | |
177 | The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC | |
178 | and audio daughtercard for the Samsung SMDK6410 reference | |
179 | platform. Enabling this option will build support for this | |
180 | module into the kernel. The presence of the module will be | |
181 | detected at runtime so the the resulting kernel can be used | |
182 | with or without the 1190-EV1 fitted. | |
87c4122f | 183 | |
60f9101a MB |
184 | config SMDK6410_WM1192_EV1 |
185 | bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" | |
186 | depends on MACH_SMDK6410 | |
187 | select REGULATOR | |
188 | select REGULATOR_WM831X | |
189 | select S3C24XX_GPIO_EXTRA64 | |
190 | select MFD_WM831X | |
191 | help | |
192 | The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC | |
193 | daughtercard for the Samsung SMDK6410 reference platform. | |
194 | Enabling this option will build support for this module into | |
195 | the kernel. The presence of the daughtercard will be | |
196 | detected at runtime so the the resulting kernel can be used | |
197 | with or without the 1192-EV1 fitted. | |
198 | ||
87c4122f KP |
199 | config MACH_NCP |
200 | bool "NCP" | |
201 | select CPU_S3C6410 | |
202 | select S3C_DEV_I2C1 | |
203 | select S3C_DEV_HSMMC1 | |
204 | select S3C64XX_SETUP_I2C1 | |
205 | help | |
206 | Machine support for the Samsung NCP | |
2896bda4 PK |
207 | |
208 | config MACH_HMT | |
209 | bool "Airgoo HMT" | |
210 | select CPU_S3C6410 | |
211 | select S3C_DEV_FB | |
d23b3517 | 212 | select S3C_DEV_NAND |
2896bda4 PK |
213 | select S3C_DEV_USB_HOST |
214 | select S3C64XX_SETUP_FB_24BPP | |
215 | select HAVE_PWM | |
216 | help | |
217 | Machine support for the Airgoo HMT | |
a2f7bffa MC |
218 | |
219 | config MACH_SMARTQ | |
220 | bool | |
221 | select CPU_S3C6410 | |
222 | select S3C_DEV_HSMMC | |
223 | select S3C_DEV_HSMMC1 | |
224 | select S3C_DEV_HSMMC2 | |
225 | select S3C_DEV_FB | |
226 | select S3C_DEV_HWMON | |
227 | select S3C_DEV_RTC | |
228 | select S3C_DEV_USB_HSOTG | |
229 | select S3C_DEV_USB_HOST | |
230 | select S3C64XX_SETUP_SDHCI | |
231 | select S3C64XX_SETUP_FB_24BPP | |
232 | select SAMSUNG_DEV_ADC | |
233 | select SAMSUNG_DEV_TS | |
234 | select HAVE_PWM | |
235 | help | |
236 | Shared machine support for SmartQ 5/7 | |
237 | ||
238 | config MACH_SMARTQ5 | |
239 | bool "SmartQ 5" | |
240 | select MACH_SMARTQ | |
241 | help | |
242 | Machine support for the SmartQ 5 | |
243 | ||
244 | config MACH_SMARTQ7 | |
245 | bool "SmartQ 7" | |
246 | select MACH_SMARTQ | |
247 | help | |
248 | Machine support for the SmartQ 7 |