[deliverable/linux.git] / arch / arm / mach-s5pv210 / dev-spi.c

/* linux/arch/arm/mach-s5pv210/dev-spi.c
 *
 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
 *	Jaswinder Singh <jassi.brar@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>

#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/spi-clocks.h>

#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>

static char *spi_src_clks[] = {
	[S5PV210_SPI_SRCCLK_PCLK] = "pclk",
	[S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
};

/* SPI Controller platform_devices */

/* Since we emulate multi-cs capability, we do not touch the CS.
 * The emulated CS is toggled by board specific mechanism, as it can
 * be either some immediate GPIO or some signal out of some other
 * chip in between ... or some yet another way.
 * We simply do not assume anything about CS.
 */
static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
{
	unsigned int base;

	switch (pdev->id) {
	case 0:
		base = S5PV210_GPB(0);
		break;

	case 1:
		base = S5PV210_GPB(4);
		break;

	default:
		dev_err(&pdev->dev, "Invalid SPI Controller number!");
		return -EINVAL;
	}

	s3c_gpio_cfgall_range(base, 3,
			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);

	return 0;
}

static struct resource s5pv210_spi0_resource[] = {
	[0] = {
		.start = S5PV210_PA_SPI0,
		.end   = S5PV210_PA_SPI0 + 0x100 - 1,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = DMACH_SPI0_TX,
		.end   = DMACH_SPI0_TX,
		.flags = IORESOURCE_DMA,
	},
	[2] = {
		.start = DMACH_SPI0_RX,
		.end   = DMACH_SPI0_RX,
		.flags = IORESOURCE_DMA,
	},
	[3] = {
		.start = IRQ_SPI0,
		.end   = IRQ_SPI0,
		.flags = IORESOURCE_IRQ,
	},
};

static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
	.cfg_gpio = s5pv210_spi_cfg_gpio,
	.fifo_lvl_mask = 0x1ff,
	.rx_lvl_offset = 15,
	.high_speed = 1,
	.tx_st_done = 25,
};

static u64 spi_dmamask = DMA_BIT_MASK(32);

struct platform_device s5pv210_device_spi0 = {
	.name		  = "s3c64xx-spi",
	.id		  = 0,
	.num_resources	  = ARRAY_SIZE(s5pv210_spi0_resource),
	.resource	  = s5pv210_spi0_resource,
	.dev = {
		.dma_mask		= &spi_dmamask,
		.coherent_dma_mask	= DMA_BIT_MASK(32),
		.platform_data = &s5pv210_spi0_pdata,
	},
};

static struct resource s5pv210_spi1_resource[] = {
	[0] = {
		.start = S5PV210_PA_SPI1,
		.end   = S5PV210_PA_SPI1 + 0x100 - 1,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = DMACH_SPI1_TX,
		.end   = DMACH_SPI1_TX,
		.flags = IORESOURCE_DMA,
	},
	[2] = {
		.start = DMACH_SPI1_RX,
		.end   = DMACH_SPI1_RX,
		.flags = IORESOURCE_DMA,
	},
	[3] = {
		.start = IRQ_SPI1,
		.end   = IRQ_SPI1,
		.flags = IORESOURCE_IRQ,
	},
};

static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
	.cfg_gpio = s5pv210_spi_cfg_gpio,
	.fifo_lvl_mask = 0x7f,
	.rx_lvl_offset = 15,
	.high_speed = 1,
	.tx_st_done = 25,
};

struct platform_device s5pv210_device_spi1 = {
	.name		  = "s3c64xx-spi",
	.id		  = 1,
	.num_resources	  = ARRAY_SIZE(s5pv210_spi1_resource),
	.resource	  = s5pv210_spi1_resource,
	.dev = {
		.dma_mask		= &spi_dmamask,
		.coherent_dma_mask	= DMA_BIT_MASK(32),
		.platform_data = &s5pv210_spi1_pdata,
	},
};

void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
	struct s3c64xx_spi_info *pd;

	/* Reject invalid configuration */
	if (!num_cs || src_clk_nr < 0
			|| src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
		return;
	}

	switch (cntrlr) {
	case 0:
		pd = &s5pv210_spi0_pdata;
		break;
	case 1:
		pd = &s5pv210_spi1_pdata;
		break;
	default:
		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
							__func__, cntrlr);
		return;
	}

	pd->num_cs = num_cs;
	pd->src_clk_nr = src_clk_nr;
	pd->src_clk_name = spi_src_clks[src_clk_nr];
}
Commit	Line	Data
f0c303a6 JB	1	/* linux/arch/arm/mach-s5pv210/dev-spi.c
	2	*
	3	* Copyright (C) 2010 Samsung Electronics Co. Ltd.
	4	* Jaswinder Singh <jassi.brar@samsung.com>
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License version 2 as
	8	* published by the Free Software Foundation.
	9	*/
	10
	11	#include <linux/platform_device.h>
	12	#include <linux/dma-mapping.h>
1c739c7f	13	#include <linux/gpio.h>
f0c303a6 JB	14
	15	#include <mach/dma.h>
	16	#include <mach/map.h>
	17	#include <mach/irqs.h>
f0c303a6 JB	18	#include <mach/spi-clocks.h>
	19
	20	#include <plat/s3c64xx-spi.h>
	21	#include <plat/gpio-cfg.h>
	22
	23	static char *spi_src_clks[] = {
	24	[S5PV210_SPI_SRCCLK_PCLK] = "pclk",
	25	[S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
	26	};
	27
	28	/* SPI Controller platform_devices */
	29
	30	/* Since we emulate multi-cs capability, we do not touch the CS.
	31	* The emulated CS is toggled by board specific mechanism, as it can
	32	* be either some immediate GPIO or some signal out of some other
	33	* chip in between ... or some yet another way.
	34	* We simply do not assume anything about CS.
	35	*/
	36	static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
	37	{
818ac8c1 KK	38	unsigned int base;
818ac8c1 KK	39
f0c303a6 JB	40	switch (pdev->id) {
f0c303a6 JB	41	case 0:
818ac8c1	42	base = S5PV210_GPB(0);
f0c303a6 JB	43	break;
	44
	45	case 1:
818ac8c1	46	base = S5PV210_GPB(4);
f0c303a6 JB	47	break;
	48
	49	default:
	50	dev_err(&pdev->dev, "Invalid SPI Controller number!");
	51	return -EINVAL;
	52	}
	53
818ac8c1 KK	54	s3c_gpio_cfgall_range(base, 3,
	55	S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
	56
f0c303a6 JB	57	return 0;
	58	}
	59
	60	static struct resource s5pv210_spi0_resource[] = {
	61	[0] = {
	62	.start = S5PV210_PA_SPI0,
	63	.end = S5PV210_PA_SPI0 + 0x100 - 1,
	64	.flags = IORESOURCE_MEM,
	65	},
	66	[1] = {
	67	.start = DMACH_SPI0_TX,
	68	.end = DMACH_SPI0_TX,
	69	.flags = IORESOURCE_DMA,
	70	},
	71	[2] = {
	72	.start = DMACH_SPI0_RX,
	73	.end = DMACH_SPI0_RX,
	74	.flags = IORESOURCE_DMA,
	75	},
	76	[3] = {
	77	.start = IRQ_SPI0,
	78	.end = IRQ_SPI0,
	79	.flags = IORESOURCE_IRQ,
	80	},
	81	};
	82
	83	static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
	84	.cfg_gpio = s5pv210_spi_cfg_gpio,
	85	.fifo_lvl_mask = 0x1ff,
	86	.rx_lvl_offset = 15,
	87	.high_speed = 1,
8918034d	88	.tx_st_done = 25,
f0c303a6 JB	89	};
	90
	91	static u64 spi_dmamask = DMA_BIT_MASK(32);
	92
	93	struct platform_device s5pv210_device_spi0 = {
	94	.name = "s3c64xx-spi",
	95	.id = 0,
	96	.num_resources = ARRAY_SIZE(s5pv210_spi0_resource),
	97	.resource = s5pv210_spi0_resource,
	98	.dev = {
	99	.dma_mask = &spi_dmamask,
	100	.coherent_dma_mask = DMA_BIT_MASK(32),
	101	.platform_data = &s5pv210_spi0_pdata,
	102	},
	103	};
	104
	105	static struct resource s5pv210_spi1_resource[] = {
	106	[0] = {
	107	.start = S5PV210_PA_SPI1,
	108	.end = S5PV210_PA_SPI1 + 0x100 - 1,
	109	.flags = IORESOURCE_MEM,
	110	},
	111	[1] = {
	112	.start = DMACH_SPI1_TX,
	113	.end = DMACH_SPI1_TX,
	114	.flags = IORESOURCE_DMA,
	115	},
	116	[2] = {
	117	.start = DMACH_SPI1_RX,
	118	.end = DMACH_SPI1_RX,
	119	.flags = IORESOURCE_DMA,
	120	},
	121	[3] = {
	122	.start = IRQ_SPI1,
	123	.end = IRQ_SPI1,
	124	.flags = IORESOURCE_IRQ,
	125	},
	126	};
	127
	128	static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
	129	.cfg_gpio = s5pv210_spi_cfg_gpio,
	130	.fifo_lvl_mask = 0x7f,
	131	.rx_lvl_offset = 15,
	132	.high_speed = 1,
8918034d	133	.tx_st_done = 25,
f0c303a6 JB	134	};
	135
	136	struct platform_device s5pv210_device_spi1 = {
	137	.name = "s3c64xx-spi",
	138	.id = 1,
	139	.num_resources = ARRAY_SIZE(s5pv210_spi1_resource),
	140	.resource = s5pv210_spi1_resource,
	141	.dev = {
	142	.dma_mask = &spi_dmamask,
	143	.coherent_dma_mask = DMA_BIT_MASK(32),
	144	.platform_data = &s5pv210_spi1_pdata,
	145	},
	146	};
	147
	148	void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
	149	{
	150	struct s3c64xx_spi_info *pd;
	151
	152	/* Reject invalid configuration */
	153	if (!num_cs \|\| src_clk_nr < 0
	154	\|\| src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
	155	printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
	156	return;
	157	}
	158
	159	switch (cntrlr) {
	160	case 0:
	161	pd = &s5pv210_spi0_pdata;
	162	break;
	163	case 1:
	164	pd = &s5pv210_spi1_pdata;
	165	break;
	166	default:
	167	printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
	168	__func__, cntrlr);
	169	return;
	170	}
	171
	172	pd->num_cs = num_cs;
	173	pd->src_clk_nr = src_clk_nr;
	174	pd->src_clk_name = spi_src_clks[src_clk_nr];
	175	}