projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 1da177e4 LT |
1 | /* |
| 2 | * FILE SA-1100.h | |
| 3 | * | |
| 4 | * Version 1.2 | |
| 5 | * Author Copyright (c) Marc A. Viredaz, 1998 | |
| 6 | * DEC Western Research Laboratory, Palo Alto, CA | |
| 7 | * Date January 1998 (April 1997) | |
| 8 | * System StrongARM SA-1100 | |
| 9 | * Language C or ARM Assembly | |
| 10 | * Purpose Definition of constants related to the StrongARM | |
| 11 | * SA-1100 microprocessor (Advanced RISC Machine (ARM) | |
| 12 | * architecture version 4). This file is based on the | |
| 13 | * StrongARM SA-1100 data sheet version 2.2. | |
| 14 | * | |
| 15 | */ | |
| 16 | ||
| 17 | ||
| 18 | /* Be sure that virtual mapping is defined right */ | |
| 19 | #ifndef __ASM_ARCH_HARDWARE_H | |
| 20 | #error You must include hardware.h not SA-1100.h | |
| 21 | #endif | |
| 22 | ||
| 23 | #include "bitfield.h" | |
| 24 | ||
| 25 | /* | |
| 26 | * SA1100 CS line to physical address | |
| 27 | */ | |
| 28 | ||
| 29 | #define SA1100_CS0_PHYS 0x00000000 | |
| 30 | #define SA1100_CS1_PHYS 0x08000000 | |
| 31 | #define SA1100_CS2_PHYS 0x10000000 | |
| 32 | #define SA1100_CS3_PHYS 0x18000000 | |
| 33 | #define SA1100_CS4_PHYS 0x40000000 | |
| 34 | #define SA1100_CS5_PHYS 0x48000000 | |
| 35 | ||
| 36 | /* | |
| 37 | * Personal Computer Memory Card International Association (PCMCIA) sockets | |
| 38 | */ | |
| 39 | ||
| 40 | #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ | |
| 41 | #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ | |
| 42 | #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ | |
| 43 | #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ | |
| 44 | #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ | |
| 45 | ||
| 46 | #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ | |
| 47 | #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ | |
| 48 | #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ | |
| 49 | #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ | |
| 50 | ||
| 51 | #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ | |
| 52 | #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ | |
| 53 | #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ | |
| 54 | #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ | |
| 55 | ||
| 56 | #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ | |
| 57 | (0x20000000 + (Nb)*PCMCIASp) | |
| 58 | #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ | |
| 59 | #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ | |
| 60 | (_PCMCIA (Nb) + 2*PCMCIAPrtSp) | |
| 61 | #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ | |
| 62 | (_PCMCIA (Nb) + 3*PCMCIAPrtSp) | |
| 63 | ||
| 64 | #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ | |
| 65 | #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ | |
| 66 | #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ | |
| 67 | #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ | |
| 68 | ||
| 69 | #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ | |
| 70 | #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ | |
| 71 | #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ | |
| 72 | #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ | |
| 73 | ||
| 74 | ||
| 75 | /* | |
| 76 | * Universal Serial Bus (USB) Device Controller (UDC) control registers | |
| 77 | * | |
| 78 | * Registers | |
| 79 | * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device | |
| 80 | * Controller (UDC) Control Register (read/write). | |
| 81 | * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device | |
| 82 | * Controller (UDC) Address Register (read/write). | |
| 83 | * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device | |
| 84 | * Controller (UDC) Output Maximum Packet size register | |
| 85 | * (read/write). | |
| 86 | * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device | |
| 87 | * Controller (UDC) Input Maximum Packet size register | |
| 88 | * (read/write). | |
| 89 | * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device | |
| 90 | * Controller (UDC) Control/Status register end-point 0 | |
| 91 | * (read/write). | |
| 92 | * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device | |
| 93 | * Controller (UDC) Control/Status register end-point 1 | |
| 94 | * (output, read/write). | |
| 95 | * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device | |
| 96 | * Controller (UDC) Control/Status register end-point 2 | |
| 97 | * (input, read/write). | |
| 98 | * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device | |
| 99 | * Controller (UDC) Data register end-point 0 | |
| 100 | * (read/write). | |
| 101 | * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device | |
| 102 | * Controller (UDC) Write Count register end-point 0 | |
| 103 | * (read). | |
| 104 | * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device | |
| 105 | * Controller (UDC) Data Register (read/write). | |
| 106 | * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device | |
| 107 | * Controller (UDC) Status Register (read/write). | |
| 108 | */ | |
| 109 | ||
| 110 | #define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */ | |
| 111 | #define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */ | |
| 112 | #define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */ | |
| 113 | #define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */ | |
| 114 | #define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */ | |
| 115 | #define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */ | |
| 116 | #define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */ | |
| 117 | #define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */ | |
| 118 | #define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */ | |
| 119 | #define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */ | |
| 120 | #define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */ | |
| 121 | ||
| 122 | #define UDCCR_UDD 0x00000001 /* UDC Disable */ | |
| 123 | #define UDCCR_UDA 0x00000002 /* UDC Active (read) */ | |
| 124 | #define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */ | |
| 125 | #define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */ | |
| 126 | /* (disable) */ | |
| 127 | #define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */ | |
| 128 | /* (disable) */ | |
| 129 | #define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */ | |
| 130 | /* (disable) */ | |
| 131 | #define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */ | |
| 132 | /* (disable) */ | |
| 133 | #define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */ | |
| 134 | #define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */ | |
| 135 | ||
| 136 | #define UDCAR_ADD Fld (7, 0) /* function ADDress */ | |
| 137 | ||
| 138 | #define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */ | |
| 139 | /* [byte] */ | |
| 140 | #define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \ | |
| 141 | /* [1..256 byte] */ \ | |
| 142 | (((Size) - 1) << FShft (UDCOMP_OUTMAXP)) | |
| 143 | ||
| 144 | #define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */ | |
| 145 | /* [byte] */ | |
| 146 | #define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \ | |
| 147 | /* [1..256 byte] */ \ | |
| 148 | (((Size) - 1) << FShft (UDCIMP_INMAXP)) | |
| 149 | ||
| 150 | #define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */ | |
| 151 | #define UDCCS0_IPR 0x00000002 /* Input Packet Ready */ | |
| 152 | #define UDCCS0_SST 0x00000004 /* Sent STall */ | |
| 153 | #define UDCCS0_FST 0x00000008 /* Force STall */ | |
| 154 | #define UDCCS0_DE 0x00000010 /* Data End */ | |
| 155 | #define UDCCS0_SE 0x00000020 /* Setup End (read) */ | |
| 156 | #define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */ | |
| 157 | /* (write) */ | |
| 158 | #define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */ | |
| 159 | ||
| 160 | #define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */ | |
| 161 | /* Service request (read) */ | |
| 162 | #define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */ | |
| 163 | #define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */ | |
| 164 | #define UDCCS1_SST 0x00000008 /* Sent STall */ | |
| 165 | #define UDCCS1_FST 0x00000010 /* Force STall */ | |
| 166 | #define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */ | |
| 167 | ||
| 168 | #define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */ | |
| 169 | /* Service request (read) */ | |
| 170 | #define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */ | |
| 171 | #define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */ | |
| 172 | #define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */ | |
| 173 | #define UDCCS2_SST 0x00000010 /* Sent STall */ | |
| 174 | #define UDCCS2_FST 0x00000020 /* Force STall */ | |
| 175 | ||
| 176 | #define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ | |
| 177 | ||
| 178 | #define UDCWC_WC Fld (4, 0) /* Write Count */ | |
| 179 | ||
| 180 | #define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ | |
| 181 | ||
| 182 | #define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */ | |
| 183 | #define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */ | |
| 184 | #define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */ | |
| 185 | #define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */ | |
| 186 | #define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */ | |
| 187 | #define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */ | |
| 188 | ||
| 189 | ||
| 190 | /* | |
| 191 | * Universal Asynchronous Receiver/Transmitter (UART) control registers | |
| 192 | * | |
| 193 | * Registers | |
| 194 | * Ser1UTCR0 Serial port 1 Universal Asynchronous | |
| 195 | * Receiver/Transmitter (UART) Control Register 0 | |
| 196 | * (read/write). | |
| 197 | * Ser1UTCR1 Serial port 1 Universal Asynchronous | |
| 198 | * Receiver/Transmitter (UART) Control Register 1 | |
| 199 | * (read/write). | |
| 200 | * Ser1UTCR2 Serial port 1 Universal Asynchronous | |
| 201 | * Receiver/Transmitter (UART) Control Register 2 | |
| 202 | * (read/write). | |
| 203 | * Ser1UTCR3 Serial port 1 Universal Asynchronous | |
| 204 | * Receiver/Transmitter (UART) Control Register 3 | |
| 205 | * (read/write). | |
| 206 | * Ser1UTDR Serial port 1 Universal Asynchronous | |
| 207 | * Receiver/Transmitter (UART) Data Register | |
| 208 | * (read/write). | |
| 209 | * Ser1UTSR0 Serial port 1 Universal Asynchronous | |
| 210 | * Receiver/Transmitter (UART) Status Register 0 | |
| 211 | * (read/write). | |
| 212 | * Ser1UTSR1 Serial port 1 Universal Asynchronous | |
| 213 | * Receiver/Transmitter (UART) Status Register 1 (read). | |
| 214 | * | |
| 215 | * Ser2UTCR0 Serial port 2 Universal Asynchronous | |
| 216 | * Receiver/Transmitter (UART) Control Register 0 | |
| 217 | * (read/write). | |
| 218 | * Ser2UTCR1 Serial port 2 Universal Asynchronous | |
| 219 | * Receiver/Transmitter (UART) Control Register 1 | |
| 220 | * (read/write). | |
| 221 | * Ser2UTCR2 Serial port 2 Universal Asynchronous | |
| 222 | * Receiver/Transmitter (UART) Control Register 2 | |
| 223 | * (read/write). | |
| 224 | * Ser2UTCR3 Serial port 2 Universal Asynchronous | |
| 225 | * Receiver/Transmitter (UART) Control Register 3 | |
| 226 | * (read/write). | |
| 227 | * Ser2UTCR4 Serial port 2 Universal Asynchronous | |
| 228 | * Receiver/Transmitter (UART) Control Register 4 | |
| 229 | * (read/write). | |
| 230 | * Ser2UTDR Serial port 2 Universal Asynchronous | |
| 231 | * Receiver/Transmitter (UART) Data Register | |
| 232 | * (read/write). | |
| 233 | * Ser2UTSR0 Serial port 2 Universal Asynchronous | |
| 234 | * Receiver/Transmitter (UART) Status Register 0 | |
| 235 | * (read/write). | |
| 236 | * Ser2UTSR1 Serial port 2 Universal Asynchronous | |
| 237 | * Receiver/Transmitter (UART) Status Register 1 (read). | |
| 238 | * | |
| 239 | * Ser3UTCR0 Serial port 3 Universal Asynchronous | |
| 240 | * Receiver/Transmitter (UART) Control Register 0 | |
| 241 | * (read/write). | |
| 242 | * Ser3UTCR1 Serial port 3 Universal Asynchronous | |
| 243 | * Receiver/Transmitter (UART) Control Register 1 | |
| 244 | * (read/write). | |
| 245 | * Ser3UTCR2 Serial port 3 Universal Asynchronous | |
| 246 | * Receiver/Transmitter (UART) Control Register 2 | |
| 247 | * (read/write). | |
| 248 | * Ser3UTCR3 Serial port 3 Universal Asynchronous | |
| 249 | * Receiver/Transmitter (UART) Control Register 3 | |
| 250 | * (read/write). | |
| 251 | * Ser3UTDR Serial port 3 Universal Asynchronous | |
| 252 | * Receiver/Transmitter (UART) Data Register | |
| 253 | * (read/write). | |
| 254 | * Ser3UTSR0 Serial port 3 Universal Asynchronous | |
| 255 | * Receiver/Transmitter (UART) Status Register 0 | |
| 256 | * (read/write). | |
| 257 | * Ser3UTSR1 Serial port 3 Universal Asynchronous | |
| 258 | * Receiver/Transmitter (UART) Status Register 1 (read). | |
| 259 | * | |
| 260 | * Clocks | |
| 261 | * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz | |
| 262 | * or 3.5795 MHz). | |
| 263 | * fua, Tua Frequency, period of the UART communication. | |
| 264 | */ | |
| 265 | ||
| 266 | #define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */ | |
| 267 | #define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */ | |
| 268 | #define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */ | |
| 269 | #define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */ | |
| 270 | #define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */ | |
| 271 | #define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */ | |
| 272 | #define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */ | |
| 273 | #define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */ | |
| 274 | ||
| 275 | #define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */ | |
| 276 | #define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */ | |
| 277 | #define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */ | |
| 278 | #define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */ | |
| 279 | #define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */ | |
| 280 | #define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */ | |
| 281 | #define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */ | |
| 282 | ||
| 283 | #define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */ | |
| 284 | #define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */ | |
| 285 | #define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */ | |
| 286 | #define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */ | |
| 287 | #define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */ | |
| 288 | #define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */ | |
| 289 | #define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */ | |
| 290 | #define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */ | |
| 291 | ||
| 292 | #define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */ | |
| 293 | #define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */ | |
| 294 | #define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */ | |
| 295 | #define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */ | |
| 296 | #define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */ | |
| 297 | #define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */ | |
| 298 | #define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */ | |
| 299 | ||
| 300 | /* Those are still used in some places */ | |
| 301 | #define _Ser1UTCR0 __PREG(Ser1UTCR0) | |
| 302 | #define _Ser2UTCR0 __PREG(Ser2UTCR0) | |
| 303 | #define _Ser3UTCR0 __PREG(Ser3UTCR0) | |
| 304 | ||
| 305 | /* Register offsets */ | |
| 306 | #define UTCR0 0x00 | |
| 307 | #define UTCR1 0x04 | |
| 308 | #define UTCR2 0x08 | |
| 309 | #define UTCR3 0x0c | |
| 310 | #define UTDR 0x14 | |
| 311 | #define UTSR0 0x1c | |
| 312 | #define UTSR1 0x20 | |
| 313 | ||
| 314 | #define UTCR0_PE 0x00000001 /* Parity Enable */ | |
| 315 | #define UTCR0_OES 0x00000002 /* Odd/Even parity Select */ | |
| 316 | #define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */ | |
| 317 | #define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */ | |
| 318 | #define UTCR0_SBS 0x00000004 /* Stop Bit Select */ | |
| 319 | #define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */ | |
| 320 | #define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */ | |
| 321 | #define UTCR0_DSS 0x00000008 /* Data Size Select */ | |
| 322 | #define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */ | |
| 323 | #define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */ | |
| 324 | #define UTCR0_SCE 0x00000010 /* Sample Clock Enable */ | |
| 325 | /* (ser. port 1: GPIO [18], */ | |
| 326 | /* ser. port 3: GPIO [20]) */ | |
| 327 | #define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */ | |
| 328 | #define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */ | |
| 329 | #define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */ | |
| 330 | #define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */ | |
| 331 | #define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */ | |
| 332 | #define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */ | |
| 333 | #define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \ | |
| 334 | (UTCR0_1StpBit + UTCR0_8BitData) | |
| 335 | ||
| 336 | #define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ | |
| 337 | #define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ | |
| 338 | /* fua = fxtl/(16*(BRD[11:0] + 1)) */ | |
| 339 | /* Tua = 16*(BRD [11:0] + 1)*Txtl */ | |
| 340 | #define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ | |
| 341 | (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \ | |
| 342 | FShft (UTCR1_BRD)) | |
| 343 | #define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ | |
| 344 | (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \ | |
| 345 | FShft (UTCR2_BRD)) | |
| 346 | /* fua = fxtl/(16*Floor (Div/16)) */ | |
| 347 | /* Tua = 16*Floor (Div/16)*Txtl */ | |
| 348 | #define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ | |
| 349 | (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \ | |
| 350 | FShft (UTCR1_BRD)) | |
| 351 | #define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ | |
| 352 | (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \ | |
| 353 | FShft (UTCR2_BRD)) | |
| 354 | /* fua = fxtl/(16*Ceil (Div/16)) */ | |
| 355 | /* Tua = 16*Ceil (Div/16)*Txtl */ | |
| 356 | ||
| 357 | #define UTCR3_RXE 0x00000001 /* Receive Enable */ | |
| 358 | #define UTCR3_TXE 0x00000002 /* Transmit Enable */ | |
| 359 | #define UTCR3_BRK 0x00000004 /* BReaK mode */ | |
| 360 | #define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ | |
| 361 | /* more Interrupt Enable */ | |
| 362 | #define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ | |
| 363 | /* Interrupt Enable */ | |
| 364 | #define UTCR3_LBM 0x00000020 /* Look-Back Mode */ | |
| 365 | #define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \ | |
| 366 | /* TIE, LBM can be set or cleared) */ \ | |
| 367 | (UTCR3_RXE + UTCR3_TXE) | |
| 368 | ||
| 369 | #define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */ | |
| 370 | /* (HP-SIR) modulation Enable */ | |
| 371 | #define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */ | |
| 372 | #define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */ | |
| 373 | #define UTCR4_LPM 0x00000002 /* Low-Power Mode */ | |
| 374 | #define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */ | |
| 375 | #define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */ | |
| 376 | ||
| 377 | #define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ | |
| 378 | #if 0 /* Hidden receive FIFO bits */ | |
| 379 | #define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */ | |
| 380 | #define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */ | |
| 381 | #define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ | |
| 382 | #endif /* 0 */ | |
| 383 | ||
| 384 | #define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */ | |
| 385 | /* Service request (read) */ | |
| 386 | #define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */ | |
| 387 | /* more Service request (read) */ | |
| 388 | #define UTSR0_RID 0x00000004 /* Receiver IDle */ | |
| 389 | #define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */ | |
| 390 | #define UTSR0_REB 0x00000010 /* Receive End of Break */ | |
| 391 | #define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */ | |
| 392 | ||
| 393 | #define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ | |
| 394 | #define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */ | |
| 395 | #define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ | |
| 396 | #define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */ | |
| 397 | #define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */ | |
| 398 | #define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */ | |
| 399 | ||
| 400 | ||
| 401 | /* | |
| 402 | * Synchronous Data Link Controller (SDLC) control registers | |
| 403 | * | |
| 404 | * Registers | |
| 405 | * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 406 | * Control Register 0 (read/write). | |
| 407 | * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 408 | * Control Register 1 (read/write). | |
| 409 | * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 410 | * Control Register 2 (read/write). | |
| 411 | * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 412 | * Control Register 3 (read/write). | |
| 413 | * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 414 | * Control Register 4 (read/write). | |
| 415 | * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 416 | * Data Register (read/write). | |
| 417 | * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 418 | * Status Register 0 (read/write). | |
| 419 | * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC) | |
| 420 | * Status Register 1 (read/write). | |
| 421 | * | |
| 422 | * Clocks | |
| 423 | * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz | |
| 424 | * or 3.5795 MHz). | |
| 425 | * fsd, Tsd Frequency, period of the SDLC communication. | |
| 426 | */ | |
| 427 | ||
| 428 | #define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */ | |
| 429 | #define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */ | |
| 430 | #define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */ | |
| 431 | #define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */ | |
| 432 | #define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */ | |
| 433 | #define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */ | |
| 434 | #define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */ | |
| 435 | #define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */ | |
| 436 | ||
| 437 | #define SDCR0_SUS 0x00000001 /* SDLC/UART Select */ | |
| 438 | #define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */ | |
| 439 | #define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */ | |
| 440 | #define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */ | |
| 441 | #define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */ | |
| 442 | #define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */ | |
| 443 | #define SDCR0_LBM 0x00000004 /* Look-Back Mode */ | |
| 444 | #define SDCR0_BMS 0x00000008 /* Bit Modulation Select */ | |
| 445 | #define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */ | |
| 446 | #define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */ | |
| 447 | #define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */ | |
| 448 | #define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */ | |
| 449 | /* (GPIO [16]) */ | |
| 450 | #define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */ | |
| 451 | #define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */ | |
| 452 | #define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */ | |
| 453 | #define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */ | |
| 454 | #define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */ | |
| 455 | #define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */ | |
| 456 | #define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */ | |
| 457 | #define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */ | |
| 458 | ||
| 459 | #define SDCR1_AAF 0x00000001 /* Abort After Frame enable */ | |
| 460 | /* (GPIO [17]) */ | |
| 461 | #define SDCR1_TXE 0x00000002 /* Transmit Enable */ | |
| 462 | #define SDCR1_RXE 0x00000004 /* Receive Enable */ | |
| 463 | #define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ | |
| 464 | /* more Interrupt Enable */ | |
| 465 | #define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ | |
| 466 | /* Interrupt Enable */ | |
| 467 | #define SDCR1_AME 0x00000020 /* Address Match Enable */ | |
| 468 | #define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */ | |
| 469 | #define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */ | |
| 470 | #define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */ | |
| 471 | #define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */ | |
| 472 | ||
| 473 | #define SDCR2_AMV Fld (8, 0) /* Address Match Value */ | |
| 474 | ||
| 475 | #define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ | |
| 476 | #define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ | |
| 477 | /* fsd = fxtl/(16*(BRD[11:0] + 1)) */ | |
| 478 | /* Tsd = 16*(BRD[11:0] + 1)*Txtl */ | |
| 479 | #define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ | |
| 480 | (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \ | |
| 481 | FShft (SDCR3_BRD)) | |
| 482 | #define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ | |
| 483 | (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \ | |
| 484 | FShft (SDCR4_BRD)) | |
| 485 | /* fsd = fxtl/(16*Floor (Div/16)) */ | |
| 486 | /* Tsd = 16*Floor (Div/16)*Txtl */ | |
| 487 | #define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ | |
| 488 | (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \ | |
| 489 | FShft (SDCR3_BRD)) | |
| 490 | #define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ | |
| 491 | (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \ | |
| 492 | FShft (SDCR4_BRD)) | |
| 493 | /* fsd = fxtl/(16*Ceil (Div/16)) */ | |
| 494 | /* Tsd = 16*Ceil (Div/16)*Txtl */ | |
| 495 | ||
| 496 | #define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ | |
| 497 | #if 0 /* Hidden receive FIFO bits */ | |
| 498 | #define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ | |
| 499 | #define SDDR_CRE 0x00000200 /* receive CRC Error (read) */ | |
| 500 | #define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ | |
| 501 | #endif /* 0 */ | |
| 502 | ||
| 503 | #define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */ | |
| 504 | #define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ | |
| 505 | #define SDSR0_RAB 0x00000004 /* Receive ABort */ | |
| 506 | #define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ | |
| 507 | /* Service request (read) */ | |
| 508 | #define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */ | |
| 509 | /* more Service request (read) */ | |
| 510 | ||
| 511 | #define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ | |
| 512 | #define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */ | |
| 513 | #define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ | |
| 514 | #define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ | |
| 515 | #define SDSR1_RTD 0x00000010 /* Receive Transition Detected */ | |
| 516 | #define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */ | |
| 517 | #define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */ | |
| 518 | #define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */ | |
| 519 | ||
| 520 | ||
| 521 | /* | |
| 522 | * High-Speed Serial to Parallel controller (HSSP) control registers | |
| 523 | * | |
| 524 | * Registers | |
| 525 | * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel | |
| 526 | * controller (HSSP) Control Register 0 (read/write). | |
| 527 | * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel | |
| 528 | * controller (HSSP) Control Register 1 (read/write). | |
| 529 | * Ser2HSDR Serial port 2 High-Speed Serial to Parallel | |
| 530 | * controller (HSSP) Data Register (read/write). | |
| 531 | * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel | |
| 532 | * controller (HSSP) Status Register 0 (read/write). | |
| 533 | * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel | |
| 534 | * controller (HSSP) Status Register 1 (read). | |
| 535 | * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel | |
| 536 | * controller (HSSP) Control Register 2 (read/write). | |
| 537 | * [The HSCR2 register is only implemented in | |
| 538 | * versions 2.0 (rev. = 8) and higher of the StrongARM | |
| 539 | * SA-1100.] | |
| 540 | */ | |
| 541 | ||
| 542 | #define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */ | |
| 543 | #define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */ | |
| 544 | #define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */ | |
| 545 | #define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */ | |
| 546 | #define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */ | |
| 547 | #define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */ | |
| 548 | ||
| 549 | #define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */ | |
| 550 | #define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */ | |
| 551 | #define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */ | |
| 552 | #define HSCR0_LBM 0x00000002 /* Look-Back Mode */ | |
| 553 | #define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */ | |
| 554 | #define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */ | |
| 555 | #define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */ | |
| 556 | #define HSCR0_TXE 0x00000008 /* Transmit Enable */ | |
| 557 | #define HSCR0_RXE 0x00000010 /* Receive Enable */ | |
| 558 | #define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */ | |
| 559 | /* more Interrupt Enable */ | |
| 560 | #define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */ | |
| 561 | /* Interrupt Enable */ | |
| 562 | #define HSCR0_AME 0x00000080 /* Address Match Enable */ | |
| 563 | ||
| 564 | #define HSCR1_AMV Fld (8, 0) /* Address Match Value */ | |
| 565 | ||
| 566 | #define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ | |
| 567 | #if 0 /* Hidden receive FIFO bits */ | |
| 568 | #define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ | |
| 569 | #define HSDR_CRE 0x00000200 /* receive CRC Error (read) */ | |
| 570 | #define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ | |
| 571 | #endif /* 0 */ | |
| 572 | ||
| 573 | #define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */ | |
| 574 | #define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ | |
| 575 | #define HSSR0_RAB 0x00000004 /* Receive ABort */ | |
| 576 | #define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ | |
| 577 | /* Service request (read) */ | |
| 578 | #define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */ | |
| 579 | /* more Service request (read) */ | |
| 580 | #define HSSR0_FRE 0x00000020 /* receive FRaming Error */ | |
| 581 | ||
| 582 | #define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ | |
| 583 | #define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */ | |
| 584 | #define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ | |
| 585 | #define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ | |
| 586 | #define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */ | |
| 587 | #define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */ | |
| 588 | #define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */ | |
| 589 | ||
| 590 | #define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */ | |
| 591 | #define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */ | |
| 592 | /* (inverted) */ | |
| 593 | #define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */ | |
| 594 | /* (non-inverted) */ | |
| 595 | #define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */ | |
| 596 | #define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */ | |
| 597 | /* (inverted) */ | |
| 598 | #define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */ | |
| 599 | /* (non-inverted) */ | |
| 600 | ||
| 601 | ||
| 602 | /* | |
| 603 | * Multi-media Communications Port (MCP) control registers | |
| 604 | * | |
| 605 | * Registers | |
| 606 | * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP) | |
| 607 | * Control Register 0 (read/write). | |
| 608 | * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP) | |
| 609 | * Data Register 0 (audio, read/write). | |
| 610 | * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP) | |
| 611 | * Data Register 1 (telecom, read/write). | |
| 612 | * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP) | |
| 613 | * Data Register 2 (CODEC registers, read/write). | |
| 614 | * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP) | |
| 615 | * Status Register (read/write). | |
| 616 | * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP) | |
| 617 | * Control Register 1 (read/write). | |
| 618 | * [The MCCR1 register is only implemented in | |
| 619 | * versions 2.0 (rev. = 8) and higher of the StrongARM | |
| 620 | * SA-1100.] | |
| 621 | * | |
| 622 | * Clocks | |
| 623 | * fmc, Tmc Frequency, period of the MCP communication (10 MHz, | |
| 624 | * 12 MHz, or GPIO [21]). | |
| 625 | * faud, Taud Frequency, period of the audio sampling. | |
| 626 | * ftcm, Ttcm Frequency, period of the telecom sampling. | |
| 627 | */ | |
| 628 | ||
| 629 | #define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */ | |
| 630 | #define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */ | |
| 631 | #define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */ | |
| 632 | #define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */ | |
| 633 | #define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */ | |
| 634 | #define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */ | |
| 635 | ||
| 636 | #define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */ | |
| 637 | /* [6..127] */ | |
| 638 | /* faud = fmc/(32*ASD) */ | |
| 639 | /* Taud = 32*ASD*Tmc */ | |
| 640 | #define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \ | |
| 641 | /* [192..4064] */ \ | |
| 642 | ((Div)/32 << FShft (MCCR0_ASD)) | |
| 643 | /* faud = fmc/(32*Floor (Div/32)) */ | |
| 644 | /* Taud = 32*Floor (Div/32)*Tmc */ | |
| 645 | #define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \ | |
| 646 | (((Div) + 31)/32 << FShft (MCCR0_ASD)) | |
| 647 | /* faud = fmc/(32*Ceil (Div/32)) */ | |
| 648 | /* Taud = 32*Ceil (Div/32)*Tmc */ | |
| 649 | #define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */ | |
| 650 | /* Divisor/32 [16..127] */ | |
| 651 | /* ftcm = fmc/(32*TSD) */ | |
| 652 | /* Ttcm = 32*TSD*Tmc */ | |
| 653 | #define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \ | |
| 654 | /* [512..4064] */ \ | |
| 655 | ((Div)/32 << FShft (MCCR0_TSD)) | |
| 656 | /* ftcm = fmc/(32*Floor (Div/32)) */ | |
| 657 | /* Ttcm = 32*Floor (Div/32)*Tmc */ | |
| 658 | #define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \ | |
| 659 | (((Div) + 31)/32 << FShft (MCCR0_TSD)) | |
| 660 | /* ftcm = fmc/(32*Ceil (Div/32)) */ | |
| 661 | /* Ttcm = 32*Ceil (Div/32)*Tmc */ | |
| 662 | #define MCCR0_MCE 0x00010000 /* MCP Enable */ | |
| 663 | #define MCCR0_ECS 0x00020000 /* External Clock Select */ | |
| 664 | #define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */ | |
| 665 | #define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */ | |
| 666 | #define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */ | |
| 667 | /* sampling/storing Mode */ | |
| 668 | #define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */ | |
| 669 | #define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */ | |
| 670 | #define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */ | |
| 671 | /* or less interrupt Enable */ | |
| 672 | #define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */ | |
| 673 | /* or more interrupt Enable */ | |
| 674 | #define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */ | |
| 675 | /* or less interrupt Enable */ | |
| 676 | #define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */ | |
| 677 | /* more interrupt Enable */ | |
| 678 | #define MCCR0_LBM 0x00800000 /* Look-Back Mode */ | |
| 679 | #define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */ | |
| 680 | #define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \ | |
| 681 | (((Div) - 1) << FShft (MCCR0_ECP)) | |
| 682 | ||
| 683 | #define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */ | |
| 684 | /* FIFOs */ | |
| 685 | ||
| 686 | #define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */ | |
| 687 | /* FIFOs */ | |
| 688 | ||
| 689 | /* receive/transmit CODEC reg. */ | |
| 690 | /* FIFOs: */ | |
| 691 | #define MCDR2_DATA Fld (16, 0) /* reg. DATA */ | |
| 692 | #define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */ | |
| 693 | #define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */ | |
| 694 | #define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */ | |
| 695 | #define MCDR2_ADD Fld (4, 17) /* reg. ADDress */ | |
| 696 | ||
| 697 | #define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */ | |
| 698 | /* or less Service request (read) */ | |
| 699 | #define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */ | |
| 700 | /* more Service request (read) */ | |
| 701 | #define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */ | |
| 702 | /* or less Service request (read) */ | |
| 703 | #define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */ | |
| 704 | /* or more Service request (read) */ | |
| 705 | #define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */ | |
| 706 | #define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */ | |
| 707 | #define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */ | |
| 708 | #define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */ | |
| 709 | #define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */ | |
| 710 | /* (read) */ | |
| 711 | #define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */ | |
| 712 | /* (read) */ | |
| 713 | #define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */ | |
| 714 | /* (read) */ | |
| 715 | #define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */ | |
| 716 | /* (read) */ | |
| 717 | #define MCSR_CWC 0x00001000 /* CODEC register Write Completed */ | |
| 718 | /* (read) */ | |
| 719 | #define MCSR_CRC 0x00002000 /* CODEC register Read Completed */ | |
| 720 | /* (read) */ | |
| 721 | #define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */ | |
| 722 | #define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */ | |
| 723 | ||
| 724 | #define MCCR1_CFS 0x00100000 /* Clock Freq. Select */ | |
| 725 | #define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */ | |
| 726 | /* (11.981 MHz) */ | |
| 727 | #define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */ | |
| 728 | /* (9.585 MHz) */ | |
| 729 | ||
| 730 | ||
| 731 | /* | |
| 732 | * Synchronous Serial Port (SSP) control registers | |
| 733 | * | |
| 734 | * Registers | |
| 735 | * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control | |
| 736 | * Register 0 (read/write). | |
| 737 | * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control | |
| 738 | * Register 1 (read/write). | |
| 739 | * [Bits SPO and SP are only implemented in versions 2.0 | |
| 740 | * (rev. = 8) and higher of the StrongARM SA-1100.] | |
| 741 | * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data | |
| 742 | * Register (read/write). | |
| 743 | * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status | |
| 744 | * Register (read/write). | |
| 745 | * | |
| 746 | * Clocks | |
| 747 | * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz | |
| 748 | * or 3.5795 MHz). | |
| 749 | * fss, Tss Frequency, period of the SSP communication. | |
| 750 | */ | |
| 751 | ||
| 752 | #define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */ | |
| 753 | #define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */ | |
| 754 | #define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */ | |
| 755 | #define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */ | |
| 756 | ||
| 757 | #define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */ | |
| 758 | #define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \ | |
| 759 | (((Size) - 1) << FShft (SSCR0_DSS)) | |
| 760 | #define SSCR0_FRF Fld (2, 4) /* FRame Format */ | |
| 761 | #define SSCR0_Motorola /* Motorola Serial Peripheral */ \ | |
| 762 | /* Interface (SPI) format */ \ | |
| 763 | (0 << FShft (SSCR0_FRF)) | |
| 764 | #define SSCR0_TI /* Texas Instruments Synchronous */ \ | |
| 765 | /* Serial format */ \ | |
| 766 | (1 << FShft (SSCR0_FRF)) | |
| 767 | #define SSCR0_National /* National Microwire format */ \ | |
| 768 | (2 << FShft (SSCR0_FRF)) | |
| 769 | #define SSCR0_SSE 0x00000080 /* SSP Enable */ | |
| 770 | #define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */ | |
| 771 | /* fss = fxtl/(2*(SCR + 1)) */ | |
| 772 | /* Tss = 2*(SCR + 1)*Txtl */ | |
| 773 | #define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \ | |
| 774 | (((Div) - 2)/2 << FShft (SSCR0_SCR)) | |
| 775 | /* fss = fxtl/(2*Floor (Div/2)) */ | |
| 776 | /* Tss = 2*Floor (Div/2)*Txtl */ | |
| 777 | #define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \ | |
| 778 | (((Div) - 1)/2 << FShft (SSCR0_SCR)) | |
| 779 | /* fss = fxtl/(2*Ceil (Div/2)) */ | |
| 780 | /* Tss = 2*Ceil (Div/2)*Txtl */ | |
| 781 | ||
| 782 | #define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */ | |
| 783 | /* Interrupt Enable */ | |
| 784 | #define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */ | |
| 785 | /* Interrupt Enable */ | |
| 786 | #define SSCR1_LBM 0x00000004 /* Look-Back Mode */ | |
| 787 | #define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */ | |
| 788 | #define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */ | |
| 789 | #define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */ | |
| 790 | #define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */ | |
| 791 | #define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */ | |
| 792 | /* after frame (SFRM, 1st edge) */ | |
| 793 | #define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */ | |
| 794 | /* after frame (SFRM, 1st edge) */ | |
| 795 | #define SSCR1_ECS 0x00000020 /* External Clock Select */ | |
| 796 | #define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */ | |
| 797 | #define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */ | |
| 798 | ||
| 799 | #define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */ | |
| 800 | ||
| 801 | #define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */ | |
| 802 | #define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ | |
| 803 | #define SSSR_BSY 0x00000008 /* SSP BuSY (read) */ | |
| 804 | #define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */ | |
| 805 | /* Service request (read) */ | |
| 806 | #define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */ | |
| 807 | /* Service request (read) */ | |
| 808 | #define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */ | |
| 809 | ||
| 810 | ||
| 811 | /* | |
| 812 | * Operating System (OS) timer control registers | |
| 813 | * | |
| 814 | * Registers | |
| 815 | * OSMR0 Operating System (OS) timer Match Register 0 | |
| 816 | * (read/write). | |
| 817 | * OSMR1 Operating System (OS) timer Match Register 1 | |
| 818 | * (read/write). | |
| 819 | * OSMR2 Operating System (OS) timer Match Register 2 | |
| 820 | * (read/write). | |
| 821 | * OSMR3 Operating System (OS) timer Match Register 3 | |
| 822 | * (read/write). | |
| 823 | * OSCR Operating System (OS) timer Counter Register | |
| 824 | * (read/write). | |
| 825 | * OSSR Operating System (OS) timer Status Register | |
| 826 | * (read/write). | |
| 827 | * OWER Operating System (OS) timer Watch-dog Enable Register | |
| 828 | * (read/write). | |
| 829 | * OIER Operating System (OS) timer Interrupt Enable Register | |
| 830 | * (read/write). | |
| 831 | */ | |
| 832 | ||
| 3169663a RK |
833 | #define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */ |
| 834 | #define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */ | |
| 835 | #define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */ | |
| 836 | #define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */ | |
| 837 | #define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */ | |
| 838 | #define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */ | |
| 839 | #define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */ | |
| 840 | #define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */ | |
| 1da177e4 LT |
841 | |
| 842 | #define OSSR_M(Nb) /* Match detected [0..3] */ \ | |
| 843 | (0x00000001 << (Nb)) | |
| 844 | #define OSSR_M0 OSSR_M (0) /* Match detected 0 */ | |
| 845 | #define OSSR_M1 OSSR_M (1) /* Match detected 1 */ | |
| 846 | #define OSSR_M2 OSSR_M (2) /* Match detected 2 */ | |
| 847 | #define OSSR_M3 OSSR_M (3) /* Match detected 3 */ | |
| 848 | ||
| 849 | #define OWER_WME 0x00000001 /* Watch-dog Match Enable */ | |
| 850 | /* (set only) */ | |
| 851 | ||
| 852 | #define OIER_E(Nb) /* match interrupt Enable [0..3] */ \ | |
| 853 | (0x00000001 << (Nb)) | |
| 854 | #define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */ | |
| 855 | #define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */ | |
| 856 | #define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */ | |
| 857 | #define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */ | |
| 858 | ||
| 859 | ||
| 860 | /* | |
| 861 | * Real-Time Clock (RTC) control registers | |
| 862 | * | |
| 863 | * Registers | |
| 864 | * RTAR Real-Time Clock (RTC) Alarm Register (read/write). | |
| 865 | * RCNR Real-Time Clock (RTC) CouNt Register (read/write). | |
| 866 | * RTTR Real-Time Clock (RTC) Trim Register (read/write). | |
| 867 | * RTSR Real-Time Clock (RTC) Status Register (read/write). | |
| 868 | * | |
| 869 | * Clocks | |
| 870 | * frtx, Trtx Frequency, period of the real-time clock crystal | |
| 871 | * (32.768 kHz nominal). | |
| 872 | * frtc, Trtc Frequency, period of the real-time clock counter | |
| 873 | * (1 Hz nominal). | |
| 874 | */ | |
| 875 | ||
| 876 | #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ | |
| 877 | #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ | |
| 878 | #define RTTR __REG(0x90010008) /* RTC Trim Reg. */ | |
| 879 | #define RTSR __REG(0x90010010) /* RTC Status Reg. */ | |
| 880 | ||
| 881 | #define RTTR_C Fld (16, 0) /* clock divider Count - 1 */ | |
| 882 | #define RTTR_D Fld (10, 16) /* trim Delete count */ | |
| 883 | /* frtc = (1023*(C + 1) - D)*frtx/ */ | |
| 884 | /* (1023*(C + 1)^2) */ | |
| 885 | /* Trtc = (1023*(C + 1)^2)*Trtx/ */ | |
| 886 | /* (1023*(C + 1) - D) */ | |
| 887 | ||
| 888 | #define RTSR_AL 0x00000001 /* ALarm detected */ | |
| 889 | #define RTSR_HZ 0x00000002 /* 1 Hz clock detected */ | |
| 890 | #define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */ | |
| 891 | #define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */ | |
| 892 | ||
| 893 | ||
| 894 | /* | |
| 895 | * Power Manager (PM) control registers | |
| 896 | * | |
| 897 | * Registers | |
| 898 | * PMCR Power Manager (PM) Control Register (read/write). | |
| 899 | * PSSR Power Manager (PM) Sleep Status Register (read/write). | |
| 900 | * PSPR Power Manager (PM) Scratch-Pad Register (read/write). | |
| 901 | * PWER Power Manager (PM) Wake-up Enable Register | |
| 902 | * (read/write). | |
| 903 | * PCFR Power Manager (PM) general ConFiguration Register | |
| 904 | * (read/write). | |
| 905 | * PPCR Power Manager (PM) Phase-Locked Loop (PLL) | |
| 906 | * Configuration Register (read/write). | |
| 907 | * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO) | |
| 908 | * Sleep state Register (read/write, see GPIO pins). | |
| 909 | * POSR Power Manager (PM) Oscillator Status Register (read). | |
| 910 | * | |
| 911 | * Clocks | |
| 912 | * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz | |
| 913 | * or 3.5795 MHz). | |
| 914 | * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). | |
| 915 | */ | |
| 916 | ||
| 917 | #define PMCR __REG(0x90020000) /* PM Control Reg. */ | |
| 918 | #define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */ | |
| 919 | #define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */ | |
| 920 | #define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */ | |
| 921 | #define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */ | |
| 922 | #define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */ | |
| 923 | #define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */ | |
| 924 | #define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */ | |
| 925 | ||
| 926 | #define PMCR_SF 0x00000001 /* Sleep Force (set only) */ | |
| 927 | ||
| 928 | #define PSSR_SS 0x00000001 /* Software Sleep */ | |
| 929 | #define PSSR_BFS 0x00000002 /* Battery Fault Status */ | |
| 930 | /* (BATT_FAULT) */ | |
| 931 | #define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */ | |
| 932 | #define PSSR_DH 0x00000008 /* DRAM control Hold */ | |
| 933 | #define PSSR_PH 0x00000010 /* Peripheral control Hold */ | |
| 934 | ||
| 935 | #define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */ | |
| 936 | #define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ | |
| 937 | #define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ | |
| 938 | #define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ | |
| 939 | #define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ | |
| 940 | #define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ | |
| 941 | #define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ | |
| 942 | #define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ | |
| 943 | #define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ | |
| 944 | #define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ | |
| 945 | #define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ | |
| 946 | #define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ | |
| 947 | #define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ | |
| 948 | #define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ | |
| 949 | #define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ | |
| 950 | #define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ | |
| 951 | #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ | |
| 952 | #define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */ | |
| 953 | #define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */ | |
| 954 | #define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */ | |
| 955 | #define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */ | |
| 956 | #define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */ | |
| 957 | #define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */ | |
| 958 | #define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */ | |
| 959 | #define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */ | |
| 960 | #define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */ | |
| 961 | #define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */ | |
| 962 | #define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */ | |
| 963 | #define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */ | |
| 964 | #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ | |
| 965 | ||
| 966 | #define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */ | |
| 967 | #define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */ | |
| 968 | #define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */ | |
| 969 | #define PCFR_FP 0x00000002 /* Float PCMCIA pins */ | |
| 970 | #define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */ | |
| 971 | #define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */ | |
| 972 | #define PCFR_FS 0x00000004 /* Float Static memory pins */ | |
| 973 | #define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */ | |
| 974 | #define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */ | |
| 975 | #define PCFR_FO 0x00000008 /* Force RTC oscillator */ | |
| 976 | /* (32.768 kHz) enable On */ | |
| 977 | ||
| 978 | #define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */ | |
| 979 | #define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \ | |
| 980 | (0x00 << FShft (PPCR_CCF)) | |
| 981 | #define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \ | |
| 982 | (0x01 << FShft (PPCR_CCF)) | |
| 983 | #define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \ | |
| 984 | (0x02 << FShft (PPCR_CCF)) | |
| 985 | #define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \ | |
| 986 | (0x03 << FShft (PPCR_CCF)) | |
| 987 | #define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \ | |
| 988 | (0x04 << FShft (PPCR_CCF)) | |
| 989 | #define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \ | |
| 990 | (0x05 << FShft (PPCR_CCF)) | |
| 991 | #define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \ | |
| 992 | (0x06 << FShft (PPCR_CCF)) | |
| 993 | #define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \ | |
| 994 | (0x07 << FShft (PPCR_CCF)) | |
| 995 | #define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \ | |
| 996 | (0x08 << FShft (PPCR_CCF)) | |
| 997 | #define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \ | |
| 998 | (0x09 << FShft (PPCR_CCF)) | |
| 999 | #define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \ | |
| 1000 | (0x0A << FShft (PPCR_CCF)) | |
| 1001 | #define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \ | |
| 1002 | (0x0B << FShft (PPCR_CCF)) | |
| 1003 | #define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \ | |
| 1004 | (0x0C << FShft (PPCR_CCF)) | |
| 1005 | #define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \ | |
| 1006 | (0x0D << FShft (PPCR_CCF)) | |
| 1007 | #define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \ | |
| 1008 | (0x0E << FShft (PPCR_CCF)) | |
| 1009 | #define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \ | |
| 1010 | (0x0F << FShft (PPCR_CCF)) | |
| 1011 | /* 3.6864 MHz crystal (fxtl): */ | |
| 1012 | #define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */ | |
| 1013 | #define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */ | |
| 1014 | #define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */ | |
| 1015 | #define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */ | |
| 1016 | #define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */ | |
| 1017 | #define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */ | |
| 1018 | #define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */ | |
| 1019 | #define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */ | |
| 1020 | #define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */ | |
| 1021 | #define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */ | |
| 1022 | #define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */ | |
| 1023 | #define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */ | |
| 1024 | #define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */ | |
| 1025 | #define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */ | |
| 1026 | #define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */ | |
| 1027 | #define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */ | |
| 1028 | /* 3.5795 MHz crystal (fxtl): */ | |
| 1029 | #define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */ | |
| 1030 | #define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */ | |
| 1031 | #define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */ | |
| 1032 | #define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */ | |
| 1033 | #define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */ | |
| 1034 | #define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */ | |
| 1035 | #define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */ | |
| 1036 | #define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */ | |
| 1037 | #define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */ | |
| 1038 | #define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */ | |
| 1039 | #define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */ | |
| 1040 | #define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */ | |
| 1041 | #define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */ | |
| 1042 | #define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */ | |
| 1043 | #define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */ | |
| 1044 | #define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */ | |
| 1045 | ||
| 1046 | #define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */ | |
| 1047 | ||
| 1048 | ||
| 1049 | /* | |
| 1050 | * Reset Controller (RC) control registers | |
| 1051 | * | |
| 1052 | * Registers | |
| 1053 | * RSRR Reset Controller (RC) Software Reset Register | |
| 1054 | * (read/write). | |
| 1055 | * RCSR Reset Controller (RC) Status Register (read/write). | |
| 1056 | */ | |
| 1057 | ||
| 1058 | #define RSRR __REG(0x90030000) /* RC Software Reset Reg. */ | |
| 1059 | #define RCSR __REG(0x90030004) /* RC Status Reg. */ | |
| 1060 | ||
| 1061 | #define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */ | |
| 1062 | ||
| 1063 | #define RCSR_HWR 0x00000001 /* HardWare Reset */ | |
| 1064 | #define RCSR_SWR 0x00000002 /* SoftWare Reset */ | |
| 1065 | #define RCSR_WDR 0x00000004 /* Watch-Dog Reset */ | |
| 1066 | #define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */ | |
| 1067 | ||
| 1068 | ||
| 1069 | /* | |
| 1070 | * Test unit control registers | |
| 1071 | * | |
| 1072 | * Registers | |
| 1073 | * TUCR Test Unit Control Register (read/write). | |
| 1074 | */ | |
| 1075 | ||
| 1076 | #define TUCR __REG(0x90030008) /* Test Unit Control Reg. */ | |
| 1077 | ||
| 1078 | #define TUCR_TIC 0x00000040 /* TIC mode */ | |
| 1079 | #define TUCR_TTST 0x00000080 /* Trim TeST mode */ | |
| 1080 | #define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */ | |
| 1081 | /* Check */ | |
| 1082 | #define TUCR_PMD 0x00000200 /* Power Management Disable */ | |
| 1083 | #define TUCR_MR 0x00000400 /* Memory Request mode */ | |
| 1084 | #define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */ | |
| 1085 | #define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */ | |
| 1086 | /* grant (MBGNT) on GPIO [22:21] */ | |
| 1087 | #define TUCR_CTB Fld (3, 20) /* Clock Test Bits */ | |
| 1088 | #define TUCR_FDC 0x00800000 /* RTC Force Delete Count */ | |
| 1089 | #define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */ | |
| 1090 | #define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */ | |
| 1091 | #define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */ | |
| 1092 | #define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */ | |
| 1093 | #define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \ | |
| 1094 | (0 << FShft (TUCR_TSEL)) | |
| 1095 | #define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \ | |
| 1096 | (1 << FShft (TUCR_TSEL)) | |
| 1097 | #define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \ | |
| 1098 | (2 << FShft (TUCR_TSEL)) | |
| 1099 | #define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \ | |
| 1100 | (3 << FShft (TUCR_TSEL)) | |
| 1101 | #define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \ | |
| 1102 | /* Clocks on GPIO [26:27] */ \ | |
| 1103 | (4 << FShft (TUCR_TSEL)) | |
| 1104 | #define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \ | |
| 1105 | /* (Alternative) */ \ | |
| 1106 | (5 << FShft (TUCR_TSEL)) | |
| 1107 | #define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \ | |
| 1108 | (6 << FShft (TUCR_TSEL)) | |
| 1109 | #define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \ | |
| 1110 | (7 << FShft (TUCR_TSEL)) | |
| 1111 | ||
| 1112 | ||
| 1113 | /* | |
| 1114 | * General-Purpose Input/Output (GPIO) control registers | |
| 1115 | * | |
| 1116 | * Registers | |
| 1117 | * GPLR General-Purpose Input/Output (GPIO) Pin Level | |
| 1118 | * Register (read). | |
| 1119 | * GPDR General-Purpose Input/Output (GPIO) Pin Direction | |
| 1120 | * Register (read/write). | |
| 1121 | * GPSR General-Purpose Input/Output (GPIO) Pin output Set | |
| 1122 | * Register (write). | |
| 1123 | * GPCR General-Purpose Input/Output (GPIO) Pin output Clear | |
| 1124 | * Register (write). | |
| 1125 | * GRER General-Purpose Input/Output (GPIO) Rising-Edge | |
| 1126 | * detect Register (read/write). | |
| 1127 | * GFER General-Purpose Input/Output (GPIO) Falling-Edge | |
| 1128 | * detect Register (read/write). | |
| 1129 | * GEDR General-Purpose Input/Output (GPIO) Edge Detect | |
| 1130 | * status Register (read/write). | |
| 1131 | * GAFR General-Purpose Input/Output (GPIO) Alternate | |
| 1132 | * Function Register (read/write). | |
| 1133 | * | |
| 1134 | * Clock | |
| 1135 | * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). | |
| 1136 | */ | |
| 1137 | ||
| 1138 | #define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */ | |
| 1139 | #define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */ | |
| 1140 | #define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */ | |
| 1141 | #define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */ | |
| 1142 | #define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */ | |
| 1143 | #define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */ | |
| 1144 | #define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */ | |
| 1145 | #define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */ | |
| 1146 | ||
| 1147 | #define GPIO_MIN (0) | |
| 1148 | #define GPIO_MAX (27) | |
| 1149 | ||
| 1150 | #define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ | |
| 1151 | (0x00000001 << (Nb)) | |
| 1152 | #define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */ | |
| 1153 | #define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */ | |
| 1154 | #define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */ | |
| 1155 | #define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */ | |
| 1156 | #define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */ | |
| 1157 | #define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */ | |
| 1158 | #define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */ | |
| 1159 | #define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */ | |
| 1160 | #define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */ | |
| 1161 | #define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */ | |
| 1162 | #define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */ | |
| 1163 | #define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */ | |
| 1164 | #define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */ | |
| 1165 | #define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */ | |
| 1166 | #define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */ | |
| 1167 | #define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */ | |
| 1168 | #define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */ | |
| 1169 | #define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */ | |
| 1170 | #define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */ | |
| 1171 | #define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */ | |
| 1172 | #define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */ | |
| 1173 | #define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */ | |
| 1174 | #define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */ | |
| 1175 | #define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */ | |
| 1176 | #define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */ | |
| 1177 | #define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */ | |
| 1178 | #define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */ | |
| 1179 | #define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */ | |
| 1180 | ||
| 1181 | #define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \ | |
| 1182 | GPIO_GPIO ((Nb) - 6) | |
| 1183 | #define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */ | |
| 1184 | #define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */ | |
| 1185 | #define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */ | |
| 1186 | #define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */ | |
| 1187 | #define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */ | |
| 1188 | #define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */ | |
| 1189 | #define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */ | |
| 1190 | #define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */ | |
| 1191 | /* ser. port 4: */ | |
| 1192 | #define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */ | |
| 1193 | #define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */ | |
| 1194 | #define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */ | |
| 1195 | #define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */ | |
| 1196 | /* ser. port 1: */ | |
| 1197 | #define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */ | |
| 1198 | #define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */ | |
| 1199 | #define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */ | |
| 1200 | #define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */ | |
| 1201 | #define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */ | |
| 1202 | /* ser. port 4: */ | |
| 1203 | #define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */ | |
| 1204 | /* ser. port 3: */ | |
| 1205 | #define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */ | |
| 1206 | /* ser. port 4: */ | |
| 1207 | #define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */ | |
| 1208 | /* test controller: */ | |
| 1209 | #define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */ | |
| 1210 | #define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */ | |
| 1211 | #define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */ | |
| 1212 | #define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */ | |
| 1213 | #define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */ | |
| 1214 | #define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */ | |
| 1215 | #define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */ | |
| 1216 | #define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */ | |
| 1217 | ||
| 1218 | #define GPDR_In 0 /* Input */ | |
| 1219 | #define GPDR_Out 1 /* Output */ | |
| 1220 | ||
| 1221 | ||
| 1222 | /* | |
| 1223 | * Interrupt Controller (IC) control registers | |
| 1224 | * | |
| 1225 | * Registers | |
| 1226 | * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ) | |
| 1227 | * Pending register (read). | |
| 1228 | * ICMR Interrupt Controller (IC) Mask Register (read/write). | |
| 1229 | * ICLR Interrupt Controller (IC) Level Register (read/write). | |
| 1230 | * ICCR Interrupt Controller (IC) Control Register | |
| 1231 | * (read/write). | |
| 1232 | * [The ICCR register is only implemented in versions 2.0 | |
| 1233 | * (rev. = 8) and higher of the StrongARM SA-1100.] | |
| 1234 | * ICFP Interrupt Controller (IC) Fast Interrupt reQuest | |
| 1235 | * (FIQ) Pending register (read). | |
| 1236 | * ICPR Interrupt Controller (IC) Pending Register (read). | |
| 1237 | * [The ICPR register is active low (inverted) in | |
| 1238 | * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the | |
| 1239 | * StrongARM SA-1100, it is active high (non-inverted) in | |
| 1240 | * versions 2.0 (rev. = 8) and higher.] | |
| 1241 | */ | |
| 1242 | ||
| 1243 | #define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */ | |
| 1244 | #define ICMR __REG(0x90050004) /* IC Mask Reg. */ | |
| 1245 | #define ICLR __REG(0x90050008) /* IC Level Reg. */ | |
| 1246 | #define ICCR __REG(0x9005000C) /* IC Control Reg. */ | |
| 1247 | #define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */ | |
| 1248 | #define ICPR __REG(0x90050020) /* IC Pending Reg. */ | |
| 1249 | ||
| 1250 | #define IC_GPIO(Nb) /* GPIO [0..10] */ \ | |
| 1251 | (0x00000001 << (Nb)) | |
| 1252 | #define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */ | |
| 1253 | #define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */ | |
| 1254 | #define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */ | |
| 1255 | #define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */ | |
| 1256 | #define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */ | |
| 1257 | #define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */ | |
| 1258 | #define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */ | |
| 1259 | #define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */ | |
| 1260 | #define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */ | |
| 1261 | #define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */ | |
| 1262 | #define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */ | |
| 1263 | #define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */ | |
| 1264 | #define IC_LCD 0x00001000 /* LCD controller */ | |
| 1265 | #define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */ | |
| 1266 | #define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */ | |
| 1267 | #define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */ | |
| 1268 | #define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */ | |
| 1269 | #define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */ | |
| 1270 | #define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */ | |
| 1271 | #define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */ | |
| 1272 | #define IC_DMA(Nb) /* DMA controller channel [0..5] */ \ | |
| 1273 | (0x00100000 << (Nb)) | |
| 1274 | #define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */ | |
| 1275 | #define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */ | |
| 1276 | #define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */ | |
| 1277 | #define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */ | |
| 1278 | #define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */ | |
| 1279 | #define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */ | |
| 1280 | #define IC_OST(Nb) /* OS Timer match [0..3] */ \ | |
| 1281 | (0x04000000 << (Nb)) | |
| 1282 | #define IC_OST0 IC_OST (0) /* OS Timer match 0 */ | |
| 1283 | #define IC_OST1 IC_OST (1) /* OS Timer match 1 */ | |
| 1284 | #define IC_OST2 IC_OST (2) /* OS Timer match 2 */ | |
| 1285 | #define IC_OST3 IC_OST (3) /* OS Timer match 3 */ | |
| 1286 | #define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */ | |
| 1287 | #define IC_RTCAlrm 0x80000000 /* RTC Alarm */ | |
| 1288 | ||
| 1289 | #define ICLR_IRQ 0 /* Interrupt ReQuest */ | |
| 1290 | #define ICLR_FIQ 1 /* Fast Interrupt reQuest */ | |
| 1291 | ||
| 1292 | #define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */ | |
| 1293 | /* Mask */ | |
| 1294 | #define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */ | |
| 1295 | /* (ICMR ignored) */ | |
| 1296 | #define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */ | |
| 1297 | /* enable (ICMR used) */ | |
| 1298 | ||
| 1299 | ||
| 1300 | /* | |
| 1301 | * Peripheral Pin Controller (PPC) control registers | |
| 1302 | * | |
| 1303 | * Registers | |
| 1304 | * PPDR Peripheral Pin Controller (PPC) Pin Direction | |
| 1305 | * Register (read/write). | |
| 1306 | * PPSR Peripheral Pin Controller (PPC) Pin State Register | |
| 1307 | * (read/write). | |
| 1308 | * PPAR Peripheral Pin Controller (PPC) Pin Assignment | |
| 1309 | * Register (read/write). | |
| 1310 | * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin | |
| 1311 | * Direction Register (read/write). | |
| 1312 | * PPFR Peripheral Pin Controller (PPC) Pin Flag Register | |
| 1313 | * (read). | |
| 1314 | */ | |
| 1315 | ||
| 1316 | #define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */ | |
| 1317 | #define PPSR __REG(0x90060004) /* PPC Pin State Reg. */ | |
| 1318 | #define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */ | |
| 1319 | #define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */ | |
| 1320 | #define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */ | |
| 1321 | ||
| 1322 | #define PPC_LDD(Nb) /* LCD Data [0..7] */ \ | |
| 1323 | (0x00000001 << (Nb)) | |
| 1324 | #define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */ | |
| 1325 | #define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */ | |
| 1326 | #define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */ | |
| 1327 | #define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */ | |
| 1328 | #define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */ | |
| 1329 | #define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */ | |
| 1330 | #define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */ | |
| 1331 | #define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */ | |
| 1332 | #define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */ | |
| 1333 | #define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */ | |
| 1334 | #define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */ | |
| 1335 | #define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */ | |
| 1336 | /* ser. port 1: */ | |
| 1337 | #define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */ | |
| 1338 | #define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */ | |
| 1339 | /* ser. port 2: */ | |
| 1340 | #define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */ | |
| 1341 | #define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */ | |
| 1342 | /* ser. port 3: */ | |
| 1343 | #define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */ | |
| 1344 | #define PPC_RXD3 0x00020000 /* UART Receive Data 3 */ | |
| 1345 | /* ser. port 4: */ | |
| 1346 | #define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */ | |
| 1347 | #define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */ | |
| 1348 | #define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */ | |
| 1349 | #define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */ | |
| 1350 | ||
| 1351 | #define PPDR_In 0 /* Input */ | |
| 1352 | #define PPDR_Out 1 /* Output */ | |
| 1353 | ||
| 1354 | /* ser. port 1: */ | |
| 1355 | #define PPAR_UPR 0x00001000 /* UART Pin Reassignment */ | |
| 1356 | #define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */ | |
| 1357 | #define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */ | |
| 1358 | /* ser. port 4: */ | |
| 1359 | #define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */ | |
| 1360 | #define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */ | |
| 1361 | /* & SFRM_C */ | |
| 1362 | #define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */ | |
| 1363 | ||
| 1364 | #define PSDR_OutL 0 /* Output Low in sleep mode */ | |
| 1365 | #define PSDR_Flt 1 /* Floating (input) in sleep mode */ | |
| 1366 | ||
| 1367 | #define PPFR_LCD 0x00000001 /* LCD controller */ | |
| 1368 | #define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */ | |
| 1369 | #define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */ | |
| 1370 | #define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */ | |
| 1371 | #define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */ | |
| 1372 | #define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */ | |
| 1373 | #define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */ | |
| 1374 | #define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */ | |
| 1375 | #define PPFR_PerEn 0 /* Peripheral Enabled */ | |
| 1376 | #define PPFR_PPCEn 1 /* PPC Enabled */ | |
| 1377 | ||
| 1378 | ||
| 1379 | /* | |
| 1380 | * Dynamic Random-Access Memory (DRAM) control registers | |
| 1381 | * | |
| 1382 | * Registers | |
| 1383 | * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM) | |
| 1384 | * CoNFiGuration register (read/write). | |
| 1385 | * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM) | |
| 1386 | * Column Address Strobe (CAS) shift register 0 | |
| 1387 | * (read/write). | |
| 1388 | * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM) | |
| 1389 | * Column Address Strobe (CAS) shift register 1 | |
| 1390 | * (read/write). | |
| 1391 | * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM) | |
| 1392 | * Column Address Strobe (CAS) shift register 2 | |
| 1393 | * (read/write). | |
| 1394 | * | |
| 1395 | * Clocks | |
| 1396 | * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). | |
| 1397 | * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). | |
| 1398 | * fcas, Tcas Frequency, period of the DRAM CAS shift registers. | |
| 1399 | */ | |
| 1400 | ||
| 1401 | #define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */ | |
| 1402 | #define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */ | |
| 1403 | #define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */ | |
| 1404 | #define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */ | |
| 1405 | ||
| 1406 | /* SA1100 MDCNFG values */ | |
| 1407 | #define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \ | |
| 1408 | (0x00000001 << (Nb)) | |
| 1409 | #define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */ | |
| 1410 | #define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */ | |
| 1411 | #define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */ | |
| 1412 | #define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */ | |
| 1413 | #define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */ | |
| 1414 | #define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \ | |
| 1415 | (((Add) - 9) << FShft (MDCNFG_DRAC)) | |
| 1416 | #define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */ | |
| 1417 | /* (fcas = fcpu/2) */ | |
| 1418 | #define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */ | |
| 1419 | #define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \ | |
| 1420 | (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP)) | |
| 1421 | #define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \ | |
| 1422 | (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP)) | |
| 1423 | #define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */ | |
| 1424 | #define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \ | |
| 1425 | (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR)) | |
| 1426 | #define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \ | |
| 1427 | (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR)) | |
| 1428 | #define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */ | |
| 1429 | #define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \ | |
| 1430 | ((Tcpu) << FShft (MDCNFG_TDL)) | |
| 1431 | #define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */ | |
| 1432 | /* [Tmem] */ | |
| 1433 | #define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \ | |
| 1434 | /* [0..262136 Tcpu] */ \ | |
| 1435 | ((Tcpu)/8 << FShft (MDCNFG_DRI)) | |
| 1436 | ||
| 1437 | /* SA1110 MDCNFG values */ | |
| 1438 | #define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */ | |
| 1439 | #define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */ | |
| 1440 | #define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */ | |
| 1441 | #define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */ | |
| 1442 | #define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */ | |
| 1443 | /* bank 0/1 */ | |
| 1444 | #define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */ | |
| 1445 | #define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */ | |
| 1446 | #define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/ | |
| 1447 | /* deassertion 0/1 */ | |
| 1448 | #define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */ | |
| 1449 | #define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */ | |
| 1450 | #define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */ | |
| 1451 | #define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */ | |
| 1452 | #define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */ | |
| 1453 | #define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */ | |
| 1454 | /* bank 0/1 */ | |
| 1455 | #define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */ | |
| 1456 | #define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */ | |
| 1457 | #define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/ | |
| 1458 | /* deassertion 0/1 */ | |
| 1459 | #define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */ | |
| 1460 | ||
| 1461 | ||
| 1462 | /* | |
| 1463 | * Static memory control registers | |
| 1464 | * | |
| 1465 | * Registers | |
| 1466 | * MSC0 Memory system: Static memory Control register 0 | |
| 1467 | * (read/write). | |
| 1468 | * MSC1 Memory system: Static memory Control register 1 | |
| 1469 | * (read/write). | |
| 1470 | * | |
| 1471 | * Clocks | |
| 1472 | * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). | |
| 1473 | * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). | |
| 1474 | */ | |
| 1475 | ||
| 1476 | #define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */ | |
| 1477 | #define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */ | |
| 1478 | #define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */ | |
| 1479 | ||
| 1480 | #define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \ | |
| 1481 | Fld (16, ((Nb) Modulo 2)*16) | |
| 1482 | #define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */ | |
| 1483 | #define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */ | |
| 1484 | #define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */ | |
| 1485 | #define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */ | |
| 1486 | ||
| 1487 | #define MSC_RT Fld (2, 0) /* ROM/static memory Type */ | |
| 1488 | #define MSC_NonBrst /* Non-Burst static memory */ \ | |
| 1489 | (0 << FShft (MSC_RT)) | |
| 1490 | #define MSC_SRAM /* 32-bit byte-writable SRAM */ \ | |
| 1491 | (1 << FShft (MSC_RT)) | |
| 1492 | #define MSC_Brst4 /* Burst-of-4 static memory */ \ | |
| 1493 | (2 << FShft (MSC_RT)) | |
| 1494 | #define MSC_Brst8 /* Burst-of-8 static memory */ \ | |
| 1495 | (3 << FShft (MSC_RT)) | |
| 1496 | #define MSC_RBW 0x0004 /* ROM/static memory Bus Width */ | |
| 1497 | #define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */ | |
| 1498 | #define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */ | |
| 1499 | #define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */ | |
| 1500 | /* First access - 1(.5) [Tmem] */ | |
| 1501 | #define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \ | |
| 1502 | /* static memory) [3..65 Tcpu] */ \ | |
| 1503 | ((((Tcpu) - 3)/2) << FShft (MSC_RDF)) | |
| 1504 | #define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \ | |
| 1505 | ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) | |
| 1506 | #define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \ | |
| 1507 | /* static memory) [2..64 Tcpu] */ \ | |
| 1508 | ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) | |
| 1509 | #define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \ | |
| 1510 | ((((Tcpu) - 1)/2) << FShft (MSC_RDF)) | |
| 1511 | #define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */ | |
| 1512 | /* Next access - 1 [Tmem] */ | |
| 1513 | #define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \ | |
| 1514 | /* static memory) [2..64 Tcpu] */ \ | |
| 1515 | ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) | |
| 1516 | #define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \ | |
| 1517 | ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) | |
| 1518 | #define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \ | |
| 1519 | /* static memory) [2..64 Tcpu] */ \ | |
| 1520 | ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) | |
| 1521 | #define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \ | |
| 1522 | ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) | |
| 1523 | #define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */ | |
| 1524 | /* time/2 [Tmem] */ | |
| 1525 | #define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \ | |
| 1526 | (((Tcpu)/4) << FShft (MSC_RRR)) | |
| 1527 | #define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \ | |
| 1528 | ((((Tcpu) + 3)/4) << FShft (MSC_RRR)) | |
| 1529 | ||
| 1530 | ||
| 1531 | /* | |
| 1532 | * Personal Computer Memory Card International Association (PCMCIA) control | |
| 1533 | * register | |
| 1534 | * | |
| 1535 | * Register | |
| 1536 | * MECR Memory system: Expansion memory bus (PCMCIA) | |
| 1537 | * Configuration Register (read/write). | |
| 1538 | * | |
| 1539 | * Clocks | |
| 1540 | * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). | |
| 1541 | * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). | |
| 1542 | * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK). | |
| 1543 | */ | |
| 1544 | ||
| 1545 | /* Memory system: */ | |
| 1546 | #define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */ | |
| 1547 | ||
| 1548 | #define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \ | |
| 1549 | Fld (15, (Nb)*16) | |
| 1550 | #define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */ | |
| 1551 | #define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */ | |
| 1552 | ||
| 1553 | #define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */ | |
| 1554 | #define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \ | |
| 1555 | ((((Tcpu) - 2)/2) << FShft (MECR_BSIO)) | |
| 1556 | #define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \ | |
| 1557 | ((((Tcpu) - 1)/2) << FShft (MECR_BSIO)) | |
| 1558 | #define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */ | |
| 1559 | /* [Tmem] */ | |
| 1560 | #define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \ | |
| 1561 | ((((Tcpu) - 2)/2) << FShft (MECR_BSA)) | |
| 1562 | #define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \ | |
| 1563 | ((((Tcpu) - 1)/2) << FShft (MECR_BSA)) | |
| 1564 | #define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */ | |
| 1565 | #define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \ | |
| 1566 | ((((Tcpu) - 2)/2) << FShft (MECR_BSM)) | |
| 1567 | #define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \ | |
| 1568 | ((((Tcpu) - 1)/2) << FShft (MECR_BSM)) | |
| 1569 | ||
| 1570 | /* | |
| 1571 | * On SA1110 only | |
| 1572 | */ | |
| 1573 | ||
| 1574 | #define MDREFR __REG(0xA000001C) | |
| 1575 | ||
| 1576 | #define MDREFR_TRASR Fld (4, 0) | |
| 1577 | #define MDREFR_DRI Fld (12, 4) | |
| 1578 | #define MDREFR_E0PIN (1 << 16) | |
| 1579 | #define MDREFR_K0RUN (1 << 17) | |
| 1580 | #define MDREFR_K0DB2 (1 << 18) | |
| 1581 | #define MDREFR_E1PIN (1 << 20) | |
| 1582 | #define MDREFR_K1RUN (1 << 21) | |
| 1583 | #define MDREFR_K1DB2 (1 << 22) | |
| 1584 | #define MDREFR_K2RUN (1 << 25) | |
| 1585 | #define MDREFR_K2DB2 (1 << 26) | |
| 1586 | #define MDREFR_EAPD (1 << 28) | |
| 1587 | #define MDREFR_KAPD (1 << 29) | |
| 1588 | #define MDREFR_SLFRSH (1 << 31) | |
| 1589 | ||
| 1590 | ||
| 1591 | /* | |
| 1592 | * Direct Memory Access (DMA) control registers | |
| 1da177e4 | 1593 | */ |
| c2132010 RK |
1594 | #define DMA_SIZE (6 * 0x20) |
| 1595 | #define DMA_PHYS 0xb0000000 | |
| 1da177e4 LT |
1596 | |
| 1597 | ||
| 1598 | /* | |
| 1599 | * Liquid Crystal Display (LCD) control registers | |
| 1600 | * | |
| 1601 | * Registers | |
| 1602 | * LCCR0 Liquid Crystal Display (LCD) Control Register 0 | |
| 1603 | * (read/write). | |
| 1604 | * [Bits LDM, BAM, and ERM are only implemented in | |
| 1605 | * versions 2.0 (rev. = 8) and higher of the StrongARM | |
| 1606 | * SA-1100.] | |
| 1607 | * LCSR Liquid Crystal Display (LCD) Status Register | |
| 1608 | * (read/write). | |
| 1609 | * [Bit LDD can be only read in versions 1.0 (rev. = 1) | |
| 1610 | * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be | |
| 1611 | * read and written (cleared) in versions 2.0 (rev. = 8) | |
| 1612 | * and higher.] | |
| 1613 | * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access | |
| 1614 | * (DMA) Base Address Register channel 1 (read/write). | |
| 1615 | * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access | |
| 1616 | * (DMA) Current Address Register channel 1 (read). | |
| 1617 | * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access | |
| 1618 | * (DMA) Base Address Register channel 2 (read/write). | |
| 1619 | * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access | |
| 1620 | * (DMA) Current Address Register channel 2 (read). | |
| 1621 | * LCCR1 Liquid Crystal Display (LCD) Control Register 1 | |
| 1622 | * (read/write). | |
| 1623 | * [The LCCR1 register can be only written in | |
| 1624 | * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the | |
| 1625 | * StrongARM SA-1100, it can be written and read in | |
| 1626 | * versions 2.0 (rev. = 8) and higher.] | |
| 1627 | * LCCR2 Liquid Crystal Display (LCD) Control Register 2 | |
| 1628 | * (read/write). | |
| 1629 | * [The LCCR1 register can be only written in | |
| 1630 | * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the | |
| 1631 | * StrongARM SA-1100, it can be written and read in | |
| 1632 | * versions 2.0 (rev. = 8) and higher.] | |
| 1633 | * LCCR3 Liquid Crystal Display (LCD) Control Register 3 | |
| 1634 | * (read/write). | |
| 1635 | * [The LCCR1 register can be only written in | |
| 1636 | * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the | |
| 1637 | * StrongARM SA-1100, it can be written and read in | |
| 1638 | * versions 2.0 (rev. = 8) and higher. Bit PCP is only | |
| 1639 | * implemented in versions 2.0 (rev. = 8) and higher of | |
| 1640 | * the StrongARM SA-1100.] | |
| 1641 | * | |
| 1642 | * Clocks | |
| 1643 | * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). | |
| 1644 | * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). | |
| 1645 | * fpix, Tpix Frequency, period of the pixel clock. | |
| 1646 | * fln, Tln Frequency, period of the line clock. | |
| 1647 | * fac, Tac Frequency, period of the AC bias clock. | |
| 1648 | */ | |
| 1649 | ||
| 1650 | #define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */ | |
| 1651 | #define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \ | |
| 1652 | /* [byte] */ \ | |
| 1653 | (16*LCD_PEntrySp) | |
| 1654 | #define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \ | |
| 1655 | /* [byte] */ \ | |
| 1656 | (256*LCD_PEntrySp) | |
| 1657 | #define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \ | |
| 1658 | /* dummy-Palette Space [byte] */ \ | |
| 1659 | (16*LCD_PEntrySp) | |
| 1660 | ||
| 1661 | #define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */ | |
| 1662 | #define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */ | |
| 1663 | #define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */ | |
| 1664 | #define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */ | |
| 1665 | #define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */ | |
| 1666 | #define LCD_4Bit /* LCD 4-Bit pixel mode */ \ | |
| 1667 | (0 << FShft (LCD_PBS)) | |
| 1668 | #define LCD_8Bit /* LCD 8-Bit pixel mode */ \ | |
| 1669 | (1 << FShft (LCD_PBS)) | |
| 1670 | #define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \ | |
| 1671 | (2 << FShft (LCD_PBS)) | |
| 1672 | ||
| 1673 | #define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */ | |
| 1674 | #define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */ | |
| 1675 | #define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */ | |
| 1676 | #define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */ | |
| 1677 | #define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */ | |
| 1678 | #define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */ | |
| 1679 | #define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */ | |
| 1680 | #define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */ | |
| 1681 | #define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */ | |
| 1682 | #define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */ | |
| 1683 | #define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */ | |
| 1684 | #define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */ | |
| 1685 | #define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */ | |
| 1686 | #define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */ | |
| 1687 | #define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */ | |
| 1688 | #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ | |
| 1689 | /* (Alternative) */ | |
| 1690 | ||
| 1da177e4 LT |
1691 | #define LCCR0_LEN 0x00000001 /* LCD ENable */ |
| 1692 | #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ | |
| 1693 | #define LCCR0_Color (LCCR0_CMS*0) /* Color display */ | |
| 1694 | #define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ | |
| 1695 | #define LCCR0_SDS 0x00000004 /* Single/Dual panel display */ | |
| 1696 | /* Select */ | |
| 1697 | #define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ | |
| 1698 | #define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ | |
| 1699 | #define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */ | |
| 1700 | /* interrupt Mask (disable) */ | |
| 1701 | #define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */ | |
| 1702 | /* interrupt Mask (disable) */ | |
| 1703 | #define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */ | |
| 1704 | /* IUU, OOL, OUL, OOU, and OUU) */ | |
| 1705 | /* interrupt Mask (disable) */ | |
| 1706 | #define LCCR0_PAS 0x00000080 /* Passive/Active display Select */ | |
| 1707 | #define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ | |
| 1708 | #define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ | |
| 1709 | #define LCCR0_BLE 0x00000100 /* Big/Little Endian select */ | |
| 1710 | #define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */ | |
| 1711 | #define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */ | |
| 1712 | #define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */ | |
| 1713 | /* display mode) */ | |
| 1714 | #define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ | |
| 1715 | /* display */ | |
| 1716 | #define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ | |
| 1717 | /* display */ | |
| 1718 | #define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */ | |
| 1719 | /* [Tmem] */ | |
| 1720 | #define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \ | |
| 1721 | /* [0..510 Tcpu] */ \ | |
| 1722 | ((Tcpu)/2 << FShft (LCCR0_PDD)) | |
| 1723 | ||
| 1724 | #define LCSR_LDD 0x00000001 /* LCD Disable Done */ | |
| 1725 | #define LCSR_BAU 0x00000002 /* Base Address Update (read) */ | |
| 1726 | #define LCSR_BER 0x00000004 /* Bus ERror */ | |
| 1727 | #define LCSR_ABC 0x00000008 /* AC Bias clock Count */ | |
| 1728 | #define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */ | |
| 1729 | /* panel */ | |
| 1730 | #define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */ | |
| 1731 | /* panel */ | |
| 1732 | #define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */ | |
| 1733 | /* panel */ | |
| 1734 | #define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */ | |
| 1735 | /* panel */ | |
| 1736 | #define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */ | |
| 1737 | /* panel */ | |
| 1738 | #define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */ | |
| 1739 | /* panel */ | |
| 1740 | #define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */ | |
| 1741 | /* panel */ | |
| 1742 | #define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */ | |
| 1743 | /* panel */ | |
| 1744 | ||
| 1745 | #define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */ | |
| 1746 | #define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \ | |
| 1747 | (((Pixel) - 16)/16 << FShft (LCCR1_PPL)) | |
| 1748 | #define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ | |
| 1749 | /* pulse Width - 1 [Tpix] (L_LCLK) */ | |
| 1750 | #define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ | |
| 1751 | /* pulse Width [1..64 Tpix] */ \ | |
| 1752 | (((Tpix) - 1) << FShft (LCCR1_HSW)) | |
| 1753 | #define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ | |
| 1754 | /* count - 1 [Tpix] */ | |
| 1755 | #define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ | |
| 1756 | /* [1..256 Tpix] */ \ | |
| 1757 | (((Tpix) - 1) << FShft (LCCR1_ELW)) | |
| 1758 | #define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ | |
| 1759 | /* Wait count - 1 [Tpix] */ | |
| 1760 | #define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ | |
| 1761 | /* [1..256 Tpix] */ \ | |
| 1762 | (((Tpix) - 1) << FShft (LCCR1_BLW)) | |
| 1763 | ||
| 1764 | #define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ | |
| 1765 | #define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ | |
| 1766 | (((Line) - 1) << FShft (LCCR2_LPP)) | |
| 1767 | #define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ | |
| 1768 | /* Width - 1 [Tln] (L_FCLK) */ | |
| 1769 | #define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ | |
| 1770 | /* Width [1..64 Tln] */ \ | |
| 1771 | (((Tln) - 1) << FShft (LCCR2_VSW)) | |
| 1772 | #define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ | |
| 1773 | /* count [Tln] */ | |
| 1774 | #define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ | |
| 1775 | /* [0..255 Tln] */ \ | |
| 1776 | ((Tln) << FShft (LCCR2_EFW)) | |
| 1777 | #define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ | |
| 1778 | /* Wait count [Tln] */ | |
| 1779 | #define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ | |
| 1780 | /* [0..255 Tln] */ \ | |
| 1781 | ((Tln) << FShft (LCCR2_BFW)) | |
| 1782 | ||
| 1783 | #define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */ | |
| 1784 | /* [1..255] (L_PCLK) */ | |
| 1785 | /* fpix = fcpu/(2*(PCD + 2)) */ | |
| 1786 | /* Tpix = 2*(PCD + 2)*Tcpu */ | |
| 1787 | #define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \ | |
| 1788 | (((Div) - 4)/2 << FShft (LCCR3_PCD)) | |
| 1789 | /* fpix = fcpu/(2*Floor (Div/2)) */ | |
| 1790 | /* Tpix = 2*Floor (Div/2)*Tcpu */ | |
| 1791 | #define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \ | |
| 1792 | (((Div) - 3)/2 << FShft (LCCR3_PCD)) | |
| 1793 | /* fpix = fcpu/(2*Ceil (Div/2)) */ | |
| 1794 | /* Tpix = 2*Ceil (Div/2)*Tcpu */ | |
| 1795 | #define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */ | |
| 1796 | /* [Tln] (L_BIAS) */ | |
| 1797 | #define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \ | |
| 1798 | (((Div) - 2)/2 << FShft (LCCR3_ACB)) | |
| 1799 | /* fac = fln/(2*Floor (Div/2)) */ | |
| 1800 | /* Tac = 2*Floor (Div/2)*Tln */ | |
| 1801 | #define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \ | |
| 1802 | (((Div) - 1)/2 << FShft (LCCR3_ACB)) | |
| 1803 | /* fac = fln/(2*Ceil (Div/2)) */ | |
| 1804 | /* Tac = 2*Ceil (Div/2)*Tln */ | |
| 1805 | #define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */ | |
| 1806 | /* Interrupt */ | |
| 1807 | #define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \ | |
| 1808 | /* Off */ \ | |
| 1809 | (0 << FShft (LCCR3_API)) | |
| 1810 | #define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \ | |
| 1811 | /* [1..15] */ \ | |
| 1812 | ((Trans) << FShft (LCCR3_API)) | |
| 1813 | #define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */ | |
| 1814 | /* Polarity (L_FCLK) */ | |
| 1815 | #define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ | |
| 1816 | /* active High */ | |
| 1817 | #define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ | |
| 1818 | /* active Low */ | |
| 1819 | #define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */ | |
| 1820 | /* pulse Polarity (L_LCLK) */ | |
| 1821 | #define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ | |
| 1822 | /* pulse active High */ | |
| 1823 | #define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ | |
| 1824 | /* pulse active Low */ | |
| 1825 | #define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */ | |
| 1826 | #define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ | |
| 1827 | #define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ | |
| 1828 | #define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */ | |
| 1829 | /* active display mode) */ | |
| 1830 | #define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ | |
| 1831 | #define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ |