Merge branches 'irq-urgent-for-linus' and 'smp-hotplug-for-linus' of git://git.kernel...
[deliverable/linux.git] / arch / arm / mach-u300 / u300-gpio.h
CommitLineData
dd68acc7
LW
1/*
2 * Individual pin assignments for the B26/S26. Notice that the
3 * actual usage of these pins depends on the PAD MUX settings, that
4 * is why the same number can potentially appear several times.
5 * In the reference design each pin is only used for one purpose.
6 * These were determined by inspecting the B26/S26 schematic:
7 * 2/1911-ROA 128 1603
8 */
9#ifdef CONFIG_MACH_U300_BS2X
10#define U300_GPIO_PIN_UART_RX 0
11#define U300_GPIO_PIN_UART_TX 1
12#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
13#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
14#define U300_GPIO_PIN_CAM_SLEEP 4
15#define U300_GPIO_PIN_CAM_REG_EN 5
16#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
17#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
18
19#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
20#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
21#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
22#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
23#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
24#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
25#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
26#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
27
28#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
29#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
30#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
31#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
32#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
33#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
34#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
35#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
36#endif
37
38/*
39 * Individual pin assignments for the B330/S330 and B365/S365.
40 * Notice that the actual usage of these pins depends on the
41 * PAD MUX settings, that is why the same number can potentially
42 * appear several times. In the reference design each pin is only
43 * used for one purpose. These were determined by inspecting the
44 * S365 schematic.
45 */
46#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
47 defined(CONFIG_MACH_U300_BS335)
48#define U300_GPIO_PIN_UART_RX 0
49#define U300_GPIO_PIN_UART_TX 1
50#define U300_GPIO_PIN_UART_CTS 2
51#define U300_GPIO_PIN_UART_RTS 3
52#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
53#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
54#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
55#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
56
57#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
58#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
59#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
60#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
61#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
62#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
63#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
64#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
65
66#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
67#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
68#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
69#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
70#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
71#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
72#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
73#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
74
75#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
76#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
77#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
78#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
79#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
80#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
81#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
82#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
83
84#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
85#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
86#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
87#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
88#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
89#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
90#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
91#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
92
93#ifdef CONFIG_MACH_U300_BS335
94
95#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
96#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
97#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
98#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
99#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
100#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
101#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
102#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
103
104#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
105#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
106#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
107#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
108#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
109#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
110#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
111#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
112#endif
113
114#endif
This page took 0.059984 seconds and 5 git commands to generate.