[deliverable/linux.git] / arch / arm / mach-ux500 / board-mop500.h

/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License terms: GNU General Public License (GPL) version 2
 */

#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H

/* For NOMADIK_NR_GPIO */
#include <mach/irqs.h>

/* Snowball specific GPIO assignments, this board has no GPIO expander */
#define SNOWBALL_ACCEL_INT1_GPIO	163
#define SNOWBALL_ACCEL_INT2_GPIO	164
#define SNOWBALL_MAGNET_DRDY_GPIO	165
#define SNOWBALL_SDMMC_EN_GPIO		217
#define SNOWBALL_SDMMC_1V8_3V_GPIO	228
#define SNOWBALL_SDMMC_CD_GPIO		218

/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
#define HREFV60_SDMMC_1V8_3V_GPIO	5
#define HREFV60_CAMERA_FLASH_ENABLE	21
#define HREFV60_MAGNET_DRDY_GPIO	32
#define HREFV60_DISP1_RST_GPIO		65
#define HREFV60_DISP2_RST_GPIO		66
#define HREFV60_ACCEL_INT1_GPIO		82
#define HREFV60_ACCEL_INT2_GPIO		83
#define HREFV60_SDMMC_CD_GPIO		95
#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
#define HREFV60_TOUCH_RST_GPIO		143
#define HREFV60_HAL_SW_GPIO		145
#define HREFV60_SDMMC_EN_GPIO		169
#define HREFV60_MMIO_XENON_CHARGE	170
#define HREFV60_PROX_SENSE_GPIO		217

/* MOP500 generic GPIOs */
#define CAMERA_FLASH_INT_PIN		7
#define CYPRESS_TOUCH_INT_PIN		84
#define XSHUTDOWN_PRIMARY_SENSOR	141
#define XSHUTDOWN_SECONDARY_SENSOR	142
#define CYPRESS_TOUCH_RST_GPIO		143
#define MOP500_HDMI_RST_GPIO		196
#define CYPRESS_SLAVE_SELECT_GPIO	216

/* GPIOs on the TC35892 expander */
#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
#define GPIO_MAGNET_DRDY		MOP500_EGPIO(1)
#define GPIO_SDMMC_CD			MOP500_EGPIO(3)
#define GPIO_CAMERA_FLASH_ENABLE	MOP500_EGPIO(4)
#define GPIO_MMIO_XENON_CHARGE		MOP500_EGPIO(5)
#define GPIO_PROX_SENSOR		MOP500_EGPIO(7)
#define GPIO_HAL_SENSOR			MOP500_EGPIO(8)
#define GPIO_ACCEL_INT1			MOP500_EGPIO(10)
#define GPIO_ACCEL_INT2			MOP500_EGPIO(11)
#define GPIO_BU21013_CS			MOP500_EGPIO(13)
#define MOP500_DISP2_RST_GPIO		MOP500_EGPIO(14)
#define MOP500_DISP1_RST_GPIO		MOP500_EGPIO(15)
#define GPIO_SDMMC_EN			MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)
#define MOP500_EGPIO_END		MOP500_EGPIO(24)

/*
 * GPIOs on the AB8500 mixed-signals circuit
 * Notice that we subtract 1 from the number passed into the macro, this is
 * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
 * parens matches the GPIO pin number in the data sheet.
 */
#define MOP500_AB8500_PIN_GPIO(x)	(MOP500_EGPIO_END + (x) - 1)
/*Snowball AB8500 GPIO */
#define SNOWBALL_VSMPS2_1V8_GPIO	MOP500_AB8500_PIN_GPIO(1)	/* SYSCLKREQ2/GPIO1 */
#define SNOWBALL_PM_GPIO1_GPIO		MOP500_AB8500_PIN_GPIO(2)	/* SYSCLKREQ3/GPIO2 */
#define SNOWBALL_WLAN_CLK_REQ_GPIO	MOP500_AB8500_PIN_GPIO(3)	/* SYSCLKREQ4/GPIO3 */
#define SNOWBALL_PM_GPIO4_GPIO		MOP500_AB8500_PIN_GPIO(4)	/* SYSCLKREQ6/GPIO4 */
#define SNOWBALL_EN_3V6_GPIO		MOP500_AB8500_PIN_GPIO(16)	/* PWMOUT3/GPIO16 */
#define SNOWBALL_PME_ETH_GPIO		MOP500_AB8500_PIN_GPIO(24)	/* SYSCLKREQ7/GPIO24 */
#define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */

struct device;
struct i2c_board_info;

extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
extern void hrefv60_sdi_init(struct device *parent);
extern void mop500_sdi_tc35892_init(struct device *parent);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);

void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
		unsigned n);

#endif
Commit	Line	Data
008f8a2f HP	1	/*
	2	* Copyright (C) ST-Ericsson SA 2010
	3	*
	4	* License terms: GNU General Public License (GPL) version 2
	5	*/
	6
	7	#ifndef __BOARD_MOP500_H
	8	#define __BOARD_MOP500_H
	9
1baa5743 LW	10	/* For NOMADIK_NR_GPIO */
	11	#include <mach/irqs.h>
	12
017beaa6 LW	13	/* Snowball specific GPIO assignments, this board has no GPIO expander */
	14	#define SNOWBALL_ACCEL_INT1_GPIO 163
	15	#define SNOWBALL_ACCEL_INT2_GPIO 164
	16	#define SNOWBALL_MAGNET_DRDY_GPIO 165
	17	#define SNOWBALL_SDMMC_EN_GPIO 217
	18	#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
	19	#define SNOWBALL_SDMMC_CD_GPIO 218
885d0fe4	20
4b4f757c	21	/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
4b4f757c	22	#define HREFV60_SDMMC_1V8_3V_GPIO 5
017beaa6	23	#define HREFV60_CAMERA_FLASH_ENABLE 21
4b4f757c LW	24	#define HREFV60_MAGNET_DRDY_GPIO 32
	25	#define HREFV60_DISP1_RST_GPIO 65
	26	#define HREFV60_DISP2_RST_GPIO 66
017beaa6 LW	27	#define HREFV60_ACCEL_INT1_GPIO 82
	28	#define HREFV60_ACCEL_INT2_GPIO 83
	29	#define HREFV60_SDMMC_CD_GPIO 95
	30	#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
	31	#define HREFV60_TOUCH_RST_GPIO 143
	32	#define HREFV60_HAL_SW_GPIO 145
	33	#define HREFV60_SDMMC_EN_GPIO 169
	34	#define HREFV60_MMIO_XENON_CHARGE 170
	35	#define HREFV60_PROX_SENSE_GPIO 217
	36
	37	/* MOP500 generic GPIOs */
	38	#define CAMERA_FLASH_INT_PIN 7
	39	#define CYPRESS_TOUCH_INT_PIN 84
	40	#define XSHUTDOWN_PRIMARY_SENSOR 141
	41	#define XSHUTDOWN_SECONDARY_SENSOR 142
	42	#define CYPRESS_TOUCH_RST_GPIO 143
	43	#define MOP500_HDMI_RST_GPIO 196
	44	#define CYPRESS_SLAVE_SELECT_GPIO 216
b8410a15 RV	45
b8410a15 RV	46	/* GPIOs on the TC35892 expander */
4b4f757c	47	#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
017beaa6	48	#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
b8410a15	49	#define GPIO_SDMMC_CD MOP500_EGPIO(3)
017beaa6 LW	50	#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
017beaa6 LW	51	#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
a71b819b	52	#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
017beaa6 LW	53	#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
	54	#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
	55	#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
0c24352e	56	#define GPIO_BU21013_CS MOP500_EGPIO(13)
017beaa6 LW	57	#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
017beaa6 LW	58	#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
b8410a15 RV	59	#define GPIO_SDMMC_EN MOP500_EGPIO(17)
b8410a15 RV	60	#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
3ef374a2 BB	61	#define MOP500_EGPIO_END MOP500_EGPIO(24)
3ef374a2 BB	62
017beaa6 LW	63	/*
	64	* GPIOs on the AB8500 mixed-signals circuit
	65	* Notice that we subtract 1 from the number passed into the macro, this is
	66	* because the AB8500 GPIO pins are enumbered starting from 1, so the value in
	67	* parens matches the GPIO pin number in the data sheet.
	68	*/
a1524eeb	69	#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
017beaa6 LW	70	/Snowball AB8500 GPIO /
	71	#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
	72	#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
	73	#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
	74	#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
	75	#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
	76	#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
	77	#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
b8410a15	78
1baa5743	79	struct device;
705e0984 RV	80	struct i2c_board_info;
705e0984 RV	81
18403424 LJ	82	extern void mop500_sdi_init(struct device *parent);
	83	extern void snowball_sdi_init(struct device *parent);
	84	extern void hrefv60_sdi_init(struct device *parent);
	85	extern void mop500_sdi_tc35892_init(struct device *parent);
705e0984 RV	86	void __init mop500_u8500uib_init(void);
705e0984 RV	87	void __init mop500_stuib_init(void);
ed781d39 LW	88	void __init mop500_pinmaps_init(void);
	89	void __init snowball_pinmaps_init(void);
	90	void __init hrefv60_pinmaps_init(void);
705e0984 RV	91
	92	void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
	93	unsigned n);
008f8a2f HP	94
008f8a2f HP	95	#endif