[deliverable/linux.git] / arch / arm / mach-ux500 / board-mop500.h

/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License terms: GNU General Public License (GPL) version 2
 */

#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H

/* For NOMADIK_NR_GPIO */
#include <mach/irqs.h>
#include <mach/msp.h>
#include <linux/amba/mmci.h>

/* Snowball specific GPIO assignments, this board has no GPIO expander */
#define SNOWBALL_ACCEL_INT1_GPIO	163
#define SNOWBALL_ACCEL_INT2_GPIO	164
#define SNOWBALL_MAGNET_DRDY_GPIO	165
#define SNOWBALL_SDMMC_EN_GPIO		217
#define SNOWBALL_SDMMC_1V8_3V_GPIO	228
#define SNOWBALL_SDMMC_CD_GPIO		218

/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
#define HREFV60_SDMMC_1V8_3V_GPIO	5
#define HREFV60_CAMERA_FLASH_ENABLE	21
#define HREFV60_MAGNET_DRDY_GPIO	32
#define HREFV60_DISP1_RST_GPIO		65
#define HREFV60_DISP2_RST_GPIO		66
#define HREFV60_ACCEL_INT1_GPIO		82
#define HREFV60_ACCEL_INT2_GPIO		83
#define HREFV60_SDMMC_CD_GPIO		95
#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
#define HREFV60_TOUCH_RST_GPIO		143
#define HREFV60_HAL_SW_GPIO		145
#define HREFV60_SDMMC_EN_GPIO		169
#define HREFV60_MMIO_XENON_CHARGE	170
#define HREFV60_PROX_SENSE_GPIO		217

/* MOP500 generic GPIOs */
#define CAMERA_FLASH_INT_PIN		7
#define CYPRESS_TOUCH_INT_PIN		84
#define XSHUTDOWN_PRIMARY_SENSOR	141
#define XSHUTDOWN_SECONDARY_SENSOR	142
#define CYPRESS_TOUCH_RST_GPIO		143
#define MOP500_HDMI_RST_GPIO		196
#define CYPRESS_SLAVE_SELECT_GPIO	216

/* GPIOs on the TC35892 expander */
#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
#define GPIO_MAGNET_DRDY		MOP500_EGPIO(1)
#define GPIO_SDMMC_CD			MOP500_EGPIO(3)
#define GPIO_CAMERA_FLASH_ENABLE	MOP500_EGPIO(4)
#define GPIO_MMIO_XENON_CHARGE		MOP500_EGPIO(5)
#define GPIO_PROX_SENSOR		MOP500_EGPIO(7)
#define GPIO_HAL_SENSOR			MOP500_EGPIO(8)
#define GPIO_ACCEL_INT1			MOP500_EGPIO(10)
#define GPIO_ACCEL_INT2			MOP500_EGPIO(11)
#define GPIO_BU21013_CS			MOP500_EGPIO(13)
#define MOP500_DISP2_RST_GPIO		MOP500_EGPIO(14)
#define MOP500_DISP1_RST_GPIO		MOP500_EGPIO(15)
#define GPIO_SDMMC_EN			MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)
#define MOP500_EGPIO_END		MOP500_EGPIO(24)

/*
 * GPIOs on the AB8500 mixed-signals circuit
 * Notice that we subtract 1 from the number passed into the macro, this is
 * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
 * parens matches the GPIO pin number in the data sheet.
 */
#define MOP500_AB8500_PIN_GPIO(x)	(MOP500_EGPIO_END + (x) - 1)
/*Snowball AB8500 GPIO */
#define SNOWBALL_VSMPS2_1V8_GPIO	MOP500_AB8500_PIN_GPIO(1)	/* SYSCLKREQ2/GPIO1 */
#define SNOWBALL_PM_GPIO1_GPIO		MOP500_AB8500_PIN_GPIO(2)	/* SYSCLKREQ3/GPIO2 */
#define SNOWBALL_WLAN_CLK_REQ_GPIO	MOP500_AB8500_PIN_GPIO(3)	/* SYSCLKREQ4/GPIO3 */
#define SNOWBALL_PM_GPIO4_GPIO		MOP500_AB8500_PIN_GPIO(4)	/* SYSCLKREQ6/GPIO4 */
#define SNOWBALL_EN_3V6_GPIO		MOP500_AB8500_PIN_GPIO(16)	/* PWMOUT3/GPIO16 */
#define SNOWBALL_PME_ETH_GPIO		MOP500_AB8500_PIN_GPIO(24)	/* SYSCLKREQ7/GPIO24 */
#define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */

struct device;
struct i2c_board_info;
extern struct mmci_platform_data mop500_sdi0_data;
extern struct mmci_platform_data mop500_sdi1_data;
extern struct mmci_platform_data mop500_sdi2_data;
extern struct mmci_platform_data mop500_sdi4_data;
extern struct msp_i2s_platform_data msp0_platform_data;
extern struct msp_i2s_platform_data msp1_platform_data;
extern struct msp_i2s_platform_data msp2_platform_data;
extern struct msp_i2s_platform_data msp3_platform_data;
extern struct arm_pmu_platdata db8500_pmu_platdata;

extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
extern void hrefv60_sdi_init(struct device *parent);
extern void mop500_sdi_tc35892_init(struct device *parent);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
/* Due for removal once the MSP driver has been fully DT:ed. */
void mop500_of_audio_init(struct device *parent);

int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
		unsigned n);

/* TODO: Once all pieces are DT:ed, remove completely. */
struct device * __init u8500_of_init_devices(void);

#endif
Commit	Line	Data
008f8a2f HP	1	/*
	2	* Copyright (C) ST-Ericsson SA 2010
	3	*
	4	* License terms: GNU General Public License (GPL) version 2
	5	*/
	6
	7	#ifndef __BOARD_MOP500_H
	8	#define __BOARD_MOP500_H
	9
1baa5743 LW	10	/* For NOMADIK_NR_GPIO */
1baa5743 LW	11	#include <mach/irqs.h>
724ebbf4	12	#include <mach/msp.h>
5e1ac7db	13	#include <linux/amba/mmci.h>
1baa5743	14
017beaa6 LW	15	/* Snowball specific GPIO assignments, this board has no GPIO expander */
	16	#define SNOWBALL_ACCEL_INT1_GPIO 163
	17	#define SNOWBALL_ACCEL_INT2_GPIO 164
	18	#define SNOWBALL_MAGNET_DRDY_GPIO 165
	19	#define SNOWBALL_SDMMC_EN_GPIO 217
	20	#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
	21	#define SNOWBALL_SDMMC_CD_GPIO 218
885d0fe4	22
4b4f757c	23	/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
4b4f757c	24	#define HREFV60_SDMMC_1V8_3V_GPIO 5
017beaa6	25	#define HREFV60_CAMERA_FLASH_ENABLE 21
4b4f757c LW	26	#define HREFV60_MAGNET_DRDY_GPIO 32
	27	#define HREFV60_DISP1_RST_GPIO 65
	28	#define HREFV60_DISP2_RST_GPIO 66
017beaa6 LW	29	#define HREFV60_ACCEL_INT1_GPIO 82
	30	#define HREFV60_ACCEL_INT2_GPIO 83
	31	#define HREFV60_SDMMC_CD_GPIO 95
	32	#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
	33	#define HREFV60_TOUCH_RST_GPIO 143
	34	#define HREFV60_HAL_SW_GPIO 145
	35	#define HREFV60_SDMMC_EN_GPIO 169
	36	#define HREFV60_MMIO_XENON_CHARGE 170
	37	#define HREFV60_PROX_SENSE_GPIO 217
	38
	39	/* MOP500 generic GPIOs */
	40	#define CAMERA_FLASH_INT_PIN 7
	41	#define CYPRESS_TOUCH_INT_PIN 84
	42	#define XSHUTDOWN_PRIMARY_SENSOR 141
	43	#define XSHUTDOWN_SECONDARY_SENSOR 142
	44	#define CYPRESS_TOUCH_RST_GPIO 143
	45	#define MOP500_HDMI_RST_GPIO 196
	46	#define CYPRESS_SLAVE_SELECT_GPIO 216
b8410a15 RV	47
b8410a15 RV	48	/* GPIOs on the TC35892 expander */
4b4f757c	49	#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
017beaa6	50	#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
b8410a15	51	#define GPIO_SDMMC_CD MOP500_EGPIO(3)
017beaa6 LW	52	#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
017beaa6 LW	53	#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
a71b819b	54	#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
017beaa6 LW	55	#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
	56	#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
	57	#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
0c24352e	58	#define GPIO_BU21013_CS MOP500_EGPIO(13)
017beaa6 LW	59	#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
017beaa6 LW	60	#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
b8410a15 RV	61	#define GPIO_SDMMC_EN MOP500_EGPIO(17)
b8410a15 RV	62	#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
3ef374a2 BB	63	#define MOP500_EGPIO_END MOP500_EGPIO(24)
3ef374a2 BB	64
017beaa6 LW	65	/*
	66	* GPIOs on the AB8500 mixed-signals circuit
	67	* Notice that we subtract 1 from the number passed into the macro, this is
	68	* because the AB8500 GPIO pins are enumbered starting from 1, so the value in
	69	* parens matches the GPIO pin number in the data sheet.
	70	*/
a1524eeb	71	#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
017beaa6 LW	72	/Snowball AB8500 GPIO /
	73	#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
	74	#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
	75	#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
	76	#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
	77	#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
	78	#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
	79	#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
b8410a15	80
1baa5743	81	struct device;
705e0984	82	struct i2c_board_info;
5e1ac7db	83	extern struct mmci_platform_data mop500_sdi0_data;
9cf24b15 LJ	84	extern struct mmci_platform_data mop500_sdi1_data;
9cf24b15 LJ	85	extern struct mmci_platform_data mop500_sdi2_data;
5e1ac7db	86	extern struct mmci_platform_data mop500_sdi4_data;
724ebbf4 LJ	87	extern struct msp_i2s_platform_data msp0_platform_data;
	88	extern struct msp_i2s_platform_data msp1_platform_data;
	89	extern struct msp_i2s_platform_data msp2_platform_data;
	90	extern struct msp_i2s_platform_data msp3_platform_data;
96bbf791	91	extern struct arm_pmu_platdata db8500_pmu_platdata;
705e0984	92
18403424 LJ	93	extern void mop500_sdi_init(struct device *parent);
	94	extern void snowball_sdi_init(struct device *parent);
	95	extern void hrefv60_sdi_init(struct device *parent);
	96	extern void mop500_sdi_tc35892_init(struct device *parent);
705e0984 RV	97	void __init mop500_u8500uib_init(void);
705e0984 RV	98	void __init mop500_stuib_init(void);
ed781d39 LW	99	void __init mop500_pinmaps_init(void);
	100	void __init snowball_pinmaps_init(void);
	101	void __init hrefv60_pinmaps_init(void);
39b740bf	102	void mop500_audio_init(struct device *parent);
ae6d35b9	103	/* Due for removal once the MSP driver has been fully DT:ed. */
39b740bf	104	void mop500_of_audio_init(struct device *parent);
705e0984	105
fd6948bb	106	int __init mop500_uib_init(void);
705e0984 RV	107	void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
705e0984 RV	108	unsigned n);
008f8a2f	109
f65c1982 LJ	110	/* TODO: Once all pieces are DT:ed, remove completely. */
	111	struct device * __init u8500_of_init_devices(void);
	112
008f8a2f	113	#endif