[deliverable/linux.git] / arch / arm / mm / proc-v6.S

/*
 *  linux/arch/arm/mm/proc-v6.S
 *
 *  Copyright (C) 2001 Deep Blue Solutions Ltd.
 *  Modified by Catalin Marinas for noMMU support
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *  This is the "shell" of the ARMv6 processor support.
 */
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>

#include "proc-macros.S"

#define D_CACHE_LINE_SIZE	32

#define TTB_C		(1 << 0)
#define TTB_S		(1 << 1)
#define TTB_IMP		(1 << 2)
#define TTB_RGN_NC	(0 << 3)
#define TTB_RGN_WBWA	(1 << 3)
#define TTB_RGN_WT	(2 << 3)
#define TTB_RGN_WB	(3 << 3)

#ifndef CONFIG_SMP
#define TTB_FLAGS	TTB_RGN_WBWA
#define PMD_FLAGS	PMD_SECT_WB
#else
#define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
#endif

ENTRY(cpu_v6_proc_init)
	mov	pc, lr

ENTRY(cpu_v6_proc_fin)
	stmfd	sp!, {lr}
	cpsid	if				@ disable interrupts
	bl	v6_flush_kern_cache_all
	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
	bic	r0, r0, #0x1000			@ ...i............
	bic	r0, r0, #0x0006			@ .............ca.
	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
	ldmfd	sp!, {pc}

/*
 *	cpu_v6_reset(loc)
 *
 *	Perform a soft reset of the system.  Put the CPU into the
 *	same state as it would be if it had been reset, and branch
 *	to what would be the reset vector.
 *
 *	- loc   - location to jump to for soft reset
 */
	.align	5
ENTRY(cpu_v6_reset)
	mov	pc, r0

/*
 *	cpu_v6_do_idle()
 *
 *	Idle the processor (eg, wait for interrupt).
 *
 *	IRQs are already disabled.
 */
ENTRY(cpu_v6_do_idle)
	mov	r1, #0
	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
	mov	pc, lr

ENTRY(cpu_v6_dcache_clean_area)
#ifndef TLB_CAN_READ_FROM_L1_CACHE
1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
	add	r0, r0, #D_CACHE_LINE_SIZE
	subs	r1, r1, #D_CACHE_LINE_SIZE
	bhi	1b
#endif
	mov	pc, lr

/*
 *	cpu_arm926_switch_mm(pgd_phys, tsk)
 *
 *	Set the translation table base pointer to be pgd_phys
 *
 *	- pgd_phys - physical address of new TTB
 *
 *	It is assumed that:
 *	- we are not using split page tables
 */
ENTRY(cpu_v6_switch_mm)
#ifdef CONFIG_MMU
	mov	r2, #0
	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
	orr	r0, r0, #TTB_FLAGS
	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
#endif
	mov	pc, lr

/*
 *	cpu_v6_set_pte_ext(ptep, pte, ext)
 *
 *	Set a level 2 translation table entry.
 *
 *	- ptep  - pointer to level 2 translation table entry
 *		  (hardware version is stored at -1024 bytes)
 *	- pte   - PTE value to store
 *	- ext	- value for extended PTE bits
 */
	armv6_mt_table cpu_v6

ENTRY(cpu_v6_set_pte_ext)
#ifdef CONFIG_MMU
	armv6_set_pte_ext cpu_v6
#endif
	mov	pc, lr


	.type	cpu_v6_name, #object
cpu_v6_name:
	.asciz	"ARMv6-compatible processor"
	.size	cpu_v6_name, . - cpu_v6_name

	.type	cpu_pj4_name, #object
cpu_pj4_name:
	.asciz	"Marvell PJ4 processor"
	.size	cpu_pj4_name, . - cpu_pj4_name

	.align

	__INIT

/*
 *	__v6_setup
 *
 *	Initialise TLB, Caches, and MMU state ready to switch the MMU
 *	on.  Return in r0 the new CP15 C1 control register setting.
 *
 *	We automatically detect if we have a Harvard cache, and use the
 *	Harvard cache control instructions insead of the unified cache
 *	control instructions.
 *
 *	This should be able to cover all ARMv6 cores.
 *
 *	It is assumed that:
 *	- cache type register is implemented
 */
__v6_setup:
#ifdef CONFIG_SMP
	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
	orr	r0, r0, #0x20
	mcr	p15, 0, r0, c1, c0, 1
#endif

	mov	r0, #0
	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
#ifdef CONFIG_MMU
	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
	orr	r4, r4, #TTB_FLAGS
	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
#endif /* CONFIG_MMU */
	adr	r5, v6_crval
	ldmia	r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
	orr	r6, r6, #1 << 25		@ big-endian page tables
#endif
	mrc	p15, 0, r0, c1, c0, 0		@ read control register
	bic	r0, r0, r5			@ clear bits them
	orr	r0, r0, r6			@ set them
	mov	pc, lr				@ return to head.S:__ret

	/*
	 *         V X F   I D LR
	 * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
	 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
	 *         0 110       0011 1.00 .111 1101 < we want
	 */
	.type	v6_crval, #object
v6_crval:
	crval	clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c

	.type	v6_processor_functions, #object
ENTRY(v6_processor_functions)
	.word	v6_early_abort
	.word	v6_pabort
	.word	cpu_v6_proc_init
	.word	cpu_v6_proc_fin
	.word	cpu_v6_reset
	.word	cpu_v6_do_idle
	.word	cpu_v6_dcache_clean_area
	.word	cpu_v6_switch_mm
	.word	cpu_v6_set_pte_ext
	.size	v6_processor_functions, . - v6_processor_functions

	.type	cpu_arch_name, #object
cpu_arch_name:
	.asciz	"armv6"
	.size	cpu_arch_name, . - cpu_arch_name

	.type	cpu_elf_name, #object
cpu_elf_name:
	.asciz	"v6"
	.size	cpu_elf_name, . - cpu_elf_name
	.align

	.section ".proc.info.init", #alloc, #execinstr

	/*
	 * Match any ARMv6 processor core.
	 */
	.type	__v6_proc_info, #object
__v6_proc_info:
	.long	0x0007b000
	.long	0x0007f000
	.long   PMD_TYPE_SECT | \
		PMD_SECT_AP_WRITE | \
		PMD_SECT_AP_READ | \
		PMD_FLAGS
	.long   PMD_TYPE_SECT | \
		PMD_SECT_XN | \
		PMD_SECT_AP_WRITE | \
		PMD_SECT_AP_READ
	b	__v6_setup
	.long	cpu_arch_name
	.long	cpu_elf_name
	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
	.long	cpu_v6_name
	.long	v6_processor_functions
	.long	v6wbi_tlb_fns
	.long	v6_user_fns
	.long	v6_cache_fns
	.size	__v6_proc_info, . - __v6_proc_info

	.type	__pj4_v6_proc_info, #object
__pj4_v6_proc_info:
	.long	0x560f5810
	.long	0xff0ffff0
	.long   PMD_TYPE_SECT | \
		PMD_SECT_AP_WRITE | \
		PMD_SECT_AP_READ | \
		PMD_FLAGS
	.long   PMD_TYPE_SECT | \
		PMD_SECT_XN | \
		PMD_SECT_AP_WRITE | \
		PMD_SECT_AP_READ
	b	__v6_setup
	.long	cpu_arch_name
	.long	cpu_elf_name
	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
	.long	cpu_pj4_name
	.long	v6_processor_functions
	.long	v6wbi_tlb_fns
	.long	v6_user_fns
	.long	v6_cache_fns
	.size	__pj4_v6_proc_info, . - __pj4_v6_proc_info
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/arch/arm/mm/proc-v6.S
	3	*
	4	* Copyright (C) 2001 Deep Blue Solutions Ltd.
d090ddda	5	* Modified by Catalin Marinas for noMMU support
1da177e4 LT	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License version 2 as
	9	* published by the Free Software Foundation.
	10	*
	11	* This is the "shell" of the ARMv6 processor support.
	12	*/
991da17e	13	#include <linux/init.h>
1da177e4 LT	14	#include <linux/linkage.h>
1da177e4 LT	15	#include <asm/assembler.h>
e6ae744d	16	#include <asm/asm-offsets.h>
5ec9407d	17	#include <asm/hwcap.h>
74945c86	18	#include <asm/pgtable-hwdef.h>
1da177e4 LT	19	#include <asm/pgtable.h>
	20
	21	#include "proc-macros.S"
	22
	23	#define D_CACHE_LINE_SIZE 32
	24
3747b36e RK	25	#define TTB_C (1 << 0)
	26	#define TTB_S (1 << 1)
	27	#define TTB_IMP (1 << 2)
	28	#define TTB_RGN_NC (0 << 3)
	29	#define TTB_RGN_WBWA (1 << 3)
	30	#define TTB_RGN_WT (2 << 3)
	31	#define TTB_RGN_WB (3 << 3)
	32
f2131d34 RK	33	#ifndef CONFIG_SMP
f2131d34 RK	34	#define TTB_FLAGS TTB_RGN_WBWA
4b46d641	35	#define PMD_FLAGS PMD_SECT_WB
f2131d34 RK	36	#else
f2131d34 RK	37	#define TTB_FLAGS TTB_RGN_WBWA\|TTB_S
4b46d641	38	#define PMD_FLAGS PMD_SECT_WBWA\|PMD_SECT_S
f2131d34 RK	39	#endif
f2131d34 RK	40
1da177e4 LT	41	ENTRY(cpu_v6_proc_init)
	42	mov pc, lr
	43
	44	ENTRY(cpu_v6_proc_fin)
67c5587a TL	45	stmfd sp!, {lr}
	46	cpsid if @ disable interrupts
	47	bl v6_flush_kern_cache_all
	48	mrc p15, 0, r0, c1, c0, 0 @ ctrl register
	49	bic r0, r0, #0x1000 @ ...i............
	50	bic r0, r0, #0x0006 @ .............ca.
	51	mcr p15, 0, r0, c1, c0, 0 @ disable caches
	52	ldmfd sp!, {pc}
1da177e4 LT	53
	54	/*
	55	* cpu_v6_reset(loc)
	56	*
	57	* Perform a soft reset of the system. Put the CPU into the
	58	* same state as it would be if it had been reset, and branch
	59	* to what would be the reset vector.
	60	*
	61	* - loc - location to jump to for soft reset
1da177e4 LT	62	*/
	63	.align 5
	64	ENTRY(cpu_v6_reset)
	65	mov pc, r0
	66
	67	/*
	68	* cpu_v6_do_idle()
	69	*
	70	* Idle the processor (eg, wait for interrupt).
	71	*
	72	* IRQs are already disabled.
	73	*/
	74	ENTRY(cpu_v6_do_idle)
8553cb67 CM	75	mov r1, #0
8553cb67 CM	76	mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
1da177e4 LT	77	mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
	78	mov pc, lr
	79
	80	ENTRY(cpu_v6_dcache_clean_area)
	81	#ifndef TLB_CAN_READ_FROM_L1_CACHE
	82	1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
	83	add r0, r0, #D_CACHE_LINE_SIZE
	84	subs r1, r1, #D_CACHE_LINE_SIZE
	85	bhi 1b
	86	#endif
	87	mov pc, lr
	88
	89	/*
	90	* cpu_arm926_switch_mm(pgd_phys, tsk)
	91	*
	92	* Set the translation table base pointer to be pgd_phys
	93	*
	94	* - pgd_phys - physical address of new TTB
	95	*
	96	* It is assumed that:
	97	* - we are not using split page tables
	98	*/
	99	ENTRY(cpu_v6_switch_mm)
d090ddda	100	#ifdef CONFIG_MMU
1da177e4 LT	101	mov r2, #0
1da177e4 LT	102	ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
f2131d34	103	orr r0, r0, #TTB_FLAGS
d93742f5	104	mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
1da177e4 LT	105	mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
	106	mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
	107	mcr p15, 0, r1, c13, c0, 1 @ set context ID
d090ddda	108	#endif
1da177e4 LT	109	mov pc, lr
1da177e4 LT	110
1da177e4	111	/*
ad1ae2fe	112	* cpu_v6_set_pte_ext(ptep, pte, ext)
1da177e4 LT	113	*
	114	* Set a level 2 translation table entry.
	115	*
	116	* - ptep - pointer to level 2 translation table entry
	117	* (hardware version is stored at -1024 bytes)
	118	* - pte - PTE value to store
ad1ae2fe	119	* - ext - value for extended PTE bits
1da177e4	120	*/
639b0ae7 RK	121	armv6_mt_table cpu_v6
639b0ae7 RK	122
ad1ae2fe	123	ENTRY(cpu_v6_set_pte_ext)
d090ddda	124	#ifdef CONFIG_MMU
639b0ae7	125	armv6_set_pte_ext cpu_v6
d090ddda	126	#endif
1da177e4 LT	127	mov pc, lr
	128
	129
	130
edabd38e	131	.type cpu_v6_name, #object
1da177e4	132	cpu_v6_name:
94b1e96d	133	.asciz "ARMv6-compatible processor"
edabd38e SB	134	.size cpu_v6_name, . - cpu_v6_name
	135
	136	.type cpu_pj4_name, #object
	137	cpu_pj4_name:
	138	.asciz "Marvell PJ4 processor"
	139	.size cpu_pj4_name, . - cpu_pj4_name
	140
1da177e4 LT	141	.align
1da177e4 LT	142
991da17e	143	__INIT
1da177e4 LT	144
	145	/*
	146	* __v6_setup
	147	*
	148	* Initialise TLB, Caches, and MMU state ready to switch the MMU
	149	* on. Return in r0 the new CP15 C1 control register setting.
	150	*
	151	* We automatically detect if we have a Harvard cache, and use the
	152	* Harvard cache control instructions insead of the unified cache
	153	* control instructions.
	154	*
	155	* This should be able to cover all ARMv6 cores.
	156	*
	157	* It is assumed that:
	158	* - cache type register is implemented
	159	*/
	160	__v6_setup:
862184fe	161	#ifdef CONFIG_SMP
862184fe RK	162	mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
	163	orr r0, r0, #0x20
	164	mcr p15, 0, r0, c1, c0, 1
862184fe RK	165	#endif
862184fe RK	166
1da177e4 LT	167	mov r0, #0
	168	mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
	169	mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
	170	mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
	171	mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
d090ddda	172	#ifdef CONFIG_MMU
1da177e4 LT	173	mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
1da177e4 LT	174	mcr p15, 0, r0, c2, c0, 2 @ TTB control register
f2131d34	175	orr r4, r4, #TTB_FLAGS
1da177e4	176	mcr p15, 0, r4, c2, c0, 1 @ load TTB1
d090ddda	177	#endif /* CONFIG_MMU */
22b19086 RK	178	adr r5, v6_crval
22b19086 RK	179	ldmia r5, {r5, r6}
26584853 CM	180	#ifdef CONFIG_CPU_ENDIAN_BE8
	181	orr r6, r6, #1 << 25 @ big-endian page tables
	182	#endif
1da177e4	183	mrc p15, 0, r0, c1, c0, 0 @ read control register
1da177e4	184	bic r0, r0, r5 @ clear bits them
22b19086	185	orr r0, r0, r6 @ set them
1da177e4 LT	186	mov pc, lr @ return to head.S:__ret
	187
	188	/*
	189	* V X F I D LR
	190	* .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
	191	* rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
	192	* 0 110 0011 1.00 .111 1101 < we want
	193	*/
22b19086 RK	194	.type v6_crval, #object
	195	v6_crval:
	196	crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
1da177e4 LT	197
	198	.type v6_processor_functions, #object
	199	ENTRY(v6_processor_functions)
	200	.word v6_early_abort
4fb28474	201	.word v6_pabort
1da177e4 LT	202	.word cpu_v6_proc_init
	203	.word cpu_v6_proc_fin
	204	.word cpu_v6_reset
	205	.word cpu_v6_do_idle
	206	.word cpu_v6_dcache_clean_area
	207	.word cpu_v6_switch_mm
ad1ae2fe	208	.word cpu_v6_set_pte_ext
1da177e4 LT	209	.size v6_processor_functions, . - v6_processor_functions
	210
	211	.type cpu_arch_name, #object
	212	cpu_arch_name:
	213	.asciz "armv6"
	214	.size cpu_arch_name, . - cpu_arch_name
	215
	216	.type cpu_elf_name, #object
	217	cpu_elf_name:
	218	.asciz "v6"
	219	.size cpu_elf_name, . - cpu_elf_name
	220	.align
	221
02b7dd12	222	.section ".proc.info.init", #alloc, #execinstr
1da177e4 LT	223
	224	/*
	225	* Match any ARMv6 processor core.
	226	*/
	227	.type __v6_proc_info, #object
	228	__v6_proc_info:
	229	.long 0x0007b000
	230	.long 0x0007f000
	231	.long PMD_TYPE_SECT \| \
1da177e4	232	PMD_SECT_AP_WRITE \| \
4b46d641 RK	233	PMD_SECT_AP_READ \| \
4b46d641 RK	234	PMD_FLAGS
8799ee9f RK	235	.long PMD_TYPE_SECT \| \
	236	PMD_SECT_XN \| \
	237	PMD_SECT_AP_WRITE \| \
	238	PMD_SECT_AP_READ
1da177e4 LT	239	b __v6_setup
	240	.long cpu_arch_name
	241	.long cpu_elf_name
efe90d27	242	.long HWCAP_SWP\|HWCAP_HALF\|HWCAP_THUMB\|HWCAP_FAST_MULT\|HWCAP_EDSP\|HWCAP_JAVA
1da177e4 LT	243	.long cpu_v6_name
	244	.long v6_processor_functions
	245	.long v6wbi_tlb_fns
	246	.long v6_user_fns
	247	.long v6_cache_fns
	248	.size __v6_proc_info, . - __v6_proc_info
edabd38e SB	249
	250	.type __pj4_v6_proc_info, #object
	251	__pj4_v6_proc_info:
	252	.long 0x560f5810
	253	.long 0xff0ffff0
	254	.long PMD_TYPE_SECT \| \
edabd38e	255	PMD_SECT_AP_WRITE \| \
f0e5d2c9 SB	256	PMD_SECT_AP_READ \| \
f0e5d2c9 SB	257	PMD_FLAGS
edabd38e SB	258	.long PMD_TYPE_SECT \| \
	259	PMD_SECT_XN \| \
	260	PMD_SECT_AP_WRITE \| \
	261	PMD_SECT_AP_READ
	262	b __v6_setup
	263	.long cpu_arch_name
	264	.long cpu_elf_name
	265	.long HWCAP_SWP\|HWCAP_HALF\|HWCAP_THUMB\|HWCAP_FAST_MULT\|HWCAP_EDSP
	266	.long cpu_pj4_name
	267	.long v6_processor_functions
	268	.long v6wbi_tlb_fns
	269	.long v6_user_fns
	270	.long v6_cache_fns
	271	.size __pj4_v6_proc_info, . - __pj4_v6_proc_info