nomadik-gpio: allow sleep mode dir/pull to differ from normal mode
[deliverable/linux.git] / arch / arm / plat-nomadik / include / plat / pincfg.h
CommitLineData
378be066
RV
1/*
2 * Copyright (C) ST-Ericsson SA 2010
3 *
4 * License terms: GNU General Public License, version 2
5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6 *
7 * Based on arch/arm/mach-pxa/include/mach/mfp.h:
8 * Copyright (C) 2007 Marvell International Ltd.
9 * eric miao <eric.miao@marvell.com>
10 */
11
12#ifndef __PLAT_PINCFG_H
13#define __PLAT_PINCFG_H
14
15/*
16 * pin configurations are represented by 32-bit integers:
17 *
18 * bit 0.. 8 - Pin Number (512 Pins Maximum)
19 * bit 9..10 - Alternate Function Selection
20 * bit 11..12 - Pull up/down state
21 * bit 13 - Sleep mode behaviour
dacdc96c
RV
22 * bit 14 - Direction
23 * bit 15 - Value (if output)
24 * bit 16..18 - SLPM pull up/down state
25 * bit 19..20 - SLPM direction
26 * bit 21..22 - SLPM Value (if output)
378be066
RV
27 *
28 * to facilitate the definition, the following macros are provided
29 *
30 * PIN_CFG_DEFAULT - default config (0):
31 * pull up/down = disabled
7e3f7e59 32 * sleep mode = input/wakeup
dacdc96c
RV
33 * direction = input
34 * value = low
35 * SLPM direction = same as normal
36 * SLPM pull = same as normal
37 * SLPM value = same as normal
378be066
RV
38 *
39 * PIN_CFG - default config with alternate function
40 * PIN_CFG_PULL - default config with alternate function and pull up/down
41 */
42
43typedef unsigned long pin_cfg_t;
44
45#define PIN_NUM_MASK 0x1ff
46#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
47
48#define PIN_ALT_SHIFT 9
49#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
50#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
51#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
52#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
53#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
54#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
55
56#define PIN_PULL_SHIFT 11
57#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
58#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
59#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
60#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
61#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
62
63#define PIN_SLPM_SHIFT 13
64#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
65#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
6720db7c 66#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
378be066 67#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
7e3f7e59
RV
68/* These two replace the above in DB8500v2+ */
69#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
70#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
378be066 71
6720db7c
RV
72#define PIN_DIR_SHIFT 14
73#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
74#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
75#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
76#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
77
78#define PIN_VAL_SHIFT 15
79#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
80#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
81#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
82#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
83
dacdc96c
RV
84#define PIN_SLPM_PULL_SHIFT 16
85#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
86#define PIN_SLPM_PULL(x) \
87 (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
88#define PIN_SLPM_PULL_NONE \
89 ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
90#define PIN_SLPM_PULL_UP \
91 ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
92#define PIN_SLPM_PULL_DOWN \
93 ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
94
95#define PIN_SLPM_DIR_SHIFT 19
96#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
97#define PIN_SLPM_DIR(x) \
98 (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
99#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
100#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
101
102#define PIN_SLPM_VAL_SHIFT 21
103#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
104#define PIN_SLPM_VAL(x) \
105 (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
106#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
107#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
108
109/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
110#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
111#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
112#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
6720db7c
RV
113#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
114#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
115
dacdc96c
RV
116#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
117#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
118#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
119#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
120#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
6720db7c 121
dacdc96c 122#define PIN_CFG_DEFAULT (0)
378be066
RV
123
124#define PIN_CFG(num, alt) \
125 (PIN_CFG_DEFAULT |\
126 (PIN_NUM(num) | PIN_##alt))
127
dacdc96c
RV
128#define PIN_CFG_INPUT(num, alt, pull) \
129 (PIN_CFG_DEFAULT |\
130 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
131
132#define PIN_CFG_OUTPUT(num, alt, val) \
133 (PIN_CFG_DEFAULT |\
134 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
135
378be066
RV
136#define PIN_CFG_PULL(num, alt, pull) \
137 ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
138 (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
139
dacdc96c 140extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
378be066 141extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
dacdc96c 142extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
378be066
RV
143
144#endif
This page took 0.050262 seconds and 5 git commands to generate.