[deliverable/linux.git] / arch / arm / plat-s3c64xx / gpiolib.c

/* arch/arm/plat-s3c64xx/gpiolib.c
 *
 * Copyright 2008 Openmoko, Inc.
 * Copyright 2008 Simtec Electronics
 *      Ben Dooks <ben@simtec.co.uk>
 *      http://armlinux.simtec.co.uk/
 *
 * S3C64XX - GPIOlib support 
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>

#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/gpio-core.h>

#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#include <plat/regs-gpio.h>

/* GPIO bank summary:
 *
 * Bank	GPIOs	Style	SlpCon	ExtInt Group
 * A	8	4Bit	Yes	1
 * B	7	4Bit	Yes	1
 * C	8	4Bit	Yes	2
 * D	5	4Bit	Yes	3
 * E	5	4Bit	Yes	None
 * F	16	2Bit	Yes	4 [1]
 * G	7	4Bit	Yes	5
 * H	10	4Bit[2]	Yes	6
 * I	16	2Bit	Yes	None
 * J	12	2Bit	Yes	None
 * K	16	4Bit[2]	No	None
 * L	15	4Bit[2] No	None
 * M	6	4Bit	No	IRQ_EINT
 * N	16	2Bit	No	IRQ_EINT
 * O	16	2Bit	Yes	7
 * P	15	2Bit	Yes	8
 * Q	9	2Bit	Yes	9
 *
 * [1] BANKF pins 14,15 do not form part of the external interrupt sources
 * [2] BANK has two control registers, GPxCON0 and GPxCON1
 */

#define OFF_GPCON	(0x00)
#define OFF_GPDAT	(0x04)

#define con_4bit_shift(__off) ((__off) * 4)

#if 1
#define gpio_dbg(x...) do { } while(0)
#else
#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif

/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
 * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
 * following example:
 *
 * base + 0x00: Control register, 4 bits per gpio
 *	        gpio n: 4 bits starting at (4*n)
 *		0000 = input, 0001 = output, others mean special-function
 * base + 0x04: Data register, 1 bit per gpio
 *		bit n: data bit n
 *
 * Note, since the data register is one bit per gpio and is at base + 0x4
 * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
 * the output.
*/

static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
{
	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	void __iomem *base = ourchip->base;
	unsigned long con;

	con = __raw_readl(base + OFF_GPCON);
	con &= ~(0xf << con_4bit_shift(offset));
	__raw_writel(con, base + OFF_GPCON);

	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);

	return 0;
}

static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
				       unsigned offset, int value)
{
	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	void __iomem *base = ourchip->base;
	unsigned long con;
	unsigned long dat;

	con = __raw_readl(base + OFF_GPCON);
	con &= ~(0xf << con_4bit_shift(offset));
	con |= 0x1 << con_4bit_shift(offset);

	dat = __raw_readl(base + OFF_GPDAT);
	if (value)
		dat |= 1 << offset;
	else
		dat &= ~(1 << offset);

	__raw_writel(dat, base + OFF_GPDAT);
	__raw_writel(con, base + OFF_GPCON);
	__raw_writel(dat, base + OFF_GPDAT);

	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);

	return 0;
}

/* The next set of routines are for the case where the GPIO configuration
 * registers are 4 bits per GPIO but there is more than one register (the
 * bank has more than 8 GPIOs.
 *
 * This case is the similar to the 4 bit case, but the registers are as
 * follows:
 *
 * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
 *	        gpio n: 4 bits starting at (4*n)
 *		0000 = input, 0001 = output, others mean special-function
 * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
 *	        gpio n: 4 bits starting at (4*n)
 *		0000 = input, 0001 = output, others mean special-function
 * base + 0x08: Data register, 1 bit per gpio
 *		bit n: data bit n
 *
 * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
 * store the 'base + 0x4' address so that these routines see the data
 * register at ourchip->base + 0x04.
*/

static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
{
	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	void __iomem *base = ourchip->base;
	void __iomem *regcon = base;
	unsigned long con;

	if (offset > 7)
		offset -= 8;
	else
		regcon -= 4;

	con = __raw_readl(regcon);
	con &= ~(0xf << con_4bit_shift(offset));
	__raw_writel(con, regcon);

	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);

	return 0;

}

static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
				       unsigned offset, int value)
{
	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	void __iomem *base = ourchip->base;
	void __iomem *regcon = base;
	unsigned long con;
	unsigned long dat;

	if (offset > 7)
		offset -= 8;
	else
		regcon -= 4;

	con = __raw_readl(regcon);
	con &= ~(0xf << con_4bit_shift(offset));
	con |= 0x1 << con_4bit_shift(offset);

	dat = __raw_readl(base + OFF_GPDAT);
	if (value)
		dat |= 1 << offset;
	else
		dat &= ~(1 << offset);

	__raw_writel(dat, base + OFF_GPDAT);
	__raw_writel(con, regcon);
	__raw_writel(dat, base + OFF_GPDAT);

	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);

	return 0;
}

static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
	.set_pull	= s3c_gpio_setpull_updown,
	.get_pull	= s3c_gpio_getpull_updown,
};

static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
	.cfg_eint	= 7,
	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
	.set_pull	= s3c_gpio_setpull_updown,
	.get_pull	= s3c_gpio_getpull_updown,
};

static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
	.cfg_eint	= 3,
	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
	.set_pull	= s3c_gpio_setpull_updown,
	.get_pull	= s3c_gpio_getpull_updown,
};

static struct s3c_gpio_chip gpio_4bit[] = {
	{
		.base	= S3C64XX_GPA_BASE,
		.config	= &gpio_4bit_cfg_eint0111,
		.chip	= {
			.base	= S3C64XX_GPA(0),
			.ngpio	= S3C64XX_GPIO_A_NR,
			.label	= "GPA",
		},
	}, {
		.base	= S3C64XX_GPB_BASE,
		.config	= &gpio_4bit_cfg_eint0111,
		.chip	= {
			.base	= S3C64XX_GPB(0),
			.ngpio	= S3C64XX_GPIO_B_NR,
			.label	= "GPB",
		},
	}, {
		.base	= S3C64XX_GPC_BASE,
		.config	= &gpio_4bit_cfg_eint0111,
		.chip	= {
			.base	= S3C64XX_GPC(0),
			.ngpio	= S3C64XX_GPIO_C_NR,
			.label	= "GPC",
		},
	}, {
		.base	= S3C64XX_GPD_BASE,
		.config	= &gpio_4bit_cfg_eint0111,
		.chip	= {
			.base	= S3C64XX_GPD(0),
			.ngpio	= S3C64XX_GPIO_D_NR,
			.label	= "GPD",
		},
	}, {
		.base	= S3C64XX_GPE_BASE,
		.config	= &gpio_4bit_cfg_noint,
		.chip	= {
			.base	= S3C64XX_GPE(0),
			.ngpio	= S3C64XX_GPIO_E_NR,
			.label	= "GPE",
		},
	}, {
		.base	= S3C64XX_GPG_BASE,
		.config	= &gpio_4bit_cfg_eint0111,
		.chip	= {
			.base	= S3C64XX_GPG(0),
			.ngpio	= S3C64XX_GPIO_G_NR,
			.label	= "GPG",
		},
	}, {
		.base	= S3C64XX_GPM_BASE,
		.config	= &gpio_4bit_cfg_eint0011,
		.chip	= {
			.base	= S3C64XX_GPM(0),
			.ngpio	= S3C64XX_GPIO_M_NR,
			.label	= "GPM",
		},
	},
};

static struct s3c_gpio_chip gpio_4bit2[] = {
	{
		.base	= S3C64XX_GPH_BASE + 0x4,
		.config	= &gpio_4bit_cfg_eint0111,
		.chip	= {
			.base	= S3C64XX_GPH(0),
			.ngpio	= S3C64XX_GPIO_H_NR,
			.label	= "GPH",
		},
	}, {
		.base	= S3C64XX_GPK_BASE + 0x4,
		.config	= &gpio_4bit_cfg_noint,
		.chip	= {
			.base	= S3C64XX_GPK(0),
			.ngpio	= S3C64XX_GPIO_K_NR,
			.label	= "GPK",
		},
	}, {
		.base	= S3C64XX_GPL_BASE + 0x4,
		.config	= &gpio_4bit_cfg_eint0011,
		.chip	= {
			.base	= S3C64XX_GPL(0),
			.ngpio	= S3C64XX_GPIO_L_NR,
			.label	= "GPL",
		},
	},
};

static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
	.set_config	= s3c_gpio_setcfg_s3c24xx,
	.set_pull	= s3c_gpio_setpull_updown,
	.get_pull	= s3c_gpio_getpull_updown,
};

static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
	.cfg_eint	= 2,
	.set_config	= s3c_gpio_setcfg_s3c24xx,
	.set_pull	= s3c_gpio_setpull_updown,
	.get_pull	= s3c_gpio_getpull_updown,
};

static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
	.cfg_eint	= 3,
	.set_config	= s3c_gpio_setcfg_s3c24xx,
	.set_pull	= s3c_gpio_setpull_updown,
	.get_pull	= s3c_gpio_getpull_updown,
};

int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
{
	return IRQ_EINT(0) + pin;
}

static struct s3c_gpio_chip gpio_2bit[] = {
	{
		.base	= S3C64XX_GPF_BASE,
		.config	= &gpio_2bit_cfg_eint11,
		.chip	= {
			.base	= S3C64XX_GPF(0),
			.ngpio	= S3C64XX_GPIO_F_NR,
			.label	= "GPF",
		},
	}, {
		.base	= S3C64XX_GPI_BASE,
		.config	= &gpio_2bit_cfg_noint,
		.chip	= {
			.base	= S3C64XX_GPI(0),
			.ngpio	= S3C64XX_GPIO_I_NR,
			.label	= "GPI",
		},
	}, {
		.base	= S3C64XX_GPJ_BASE,
		.config	= &gpio_2bit_cfg_noint,
		.chip	= {
			.base	= S3C64XX_GPJ(0),
			.ngpio	= S3C64XX_GPIO_J_NR,
			.label	= "GPJ",
		},
	}, {
		.base	= S3C64XX_GPN_BASE,
		.config	= &gpio_2bit_cfg_eint10,
		.chip	= {
			.base	= S3C64XX_GPN(0),
			.ngpio	= S3C64XX_GPIO_N_NR,
			.label	= "GPN",
			.to_irq = s3c64xx_gpio2int_gpn,
		},
	}, {
		.base	= S3C64XX_GPO_BASE,
		.config	= &gpio_2bit_cfg_eint11,
		.chip	= {
			.base	= S3C64XX_GPO(0),
			.ngpio	= S3C64XX_GPIO_O_NR,
			.label	= "GPO",
		},
	}, {
		.base	= S3C64XX_GPP_BASE,
		.config	= &gpio_2bit_cfg_eint11,
		.chip	= {
			.base	= S3C64XX_GPP(0),
			.ngpio	= S3C64XX_GPIO_P_NR,
			.label	= "GPP",
		},
	}, {
		.base	= S3C64XX_GPQ_BASE,
		.config	= &gpio_2bit_cfg_eint11,
		.chip	= {
			.base	= S3C64XX_GPQ(0),
			.ngpio	= S3C64XX_GPIO_Q_NR,
			.label	= "GPQ",
		},
	},
};

static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
{
	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}

static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
{
	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}

static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
{
	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
}

static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
				       int nr_chips,
				       void (*fn)(struct s3c_gpio_chip *))
{
	for (; nr_chips > 0; nr_chips--, chips++) {
		if (fn)
			(fn)(chips);
		s3c_gpiolib_add(chips);
	}
}

static __init int s3c64xx_gpiolib_init(void)
{
	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
			    s3c64xx_gpiolib_add_4bit);

	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
			    s3c64xx_gpiolib_add_4bit2);

	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
			    s3c64xx_gpiolib_add_2bit);

	return 0;
}

core_initcall(s3c64xx_gpiolib_init);
Commit	Line	Data
89d043c3 BD	1	/* arch/arm/plat-s3c64xx/gpiolib.c
	2	*
	3	* Copyright 2008 Openmoko, Inc.
	4	* Copyright 2008 Simtec Electronics
	5	* Ben Dooks <ben@simtec.co.uk>
	6	* http://armlinux.simtec.co.uk/
	7	*
	8	* S3C64XX - GPIOlib support
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License version 2 as
	12	* published by the Free Software Foundation.
	13	*/
	14
	15	#include <linux/kernel.h>
	16	#include <linux/irq.h>
	17	#include <linux/io.h>
	18
	19	#include <mach/map.h>
	20	#include <mach/gpio.h>
21b23664	21	#include <mach/gpio-core.h>
89d043c3	22
21b23664 BD	23	#include <plat/gpio-cfg.h>
21b23664 BD	24	#include <plat/gpio-cfg-helpers.h>
89d043c3 BD	25	#include <plat/regs-gpio.h>
	26
	27	/* GPIO bank summary:
	28	*
	29	* Bank GPIOs Style SlpCon ExtInt Group
	30	* A 8 4Bit Yes 1
	31	* B 7 4Bit Yes 1
	32	* C 8 4Bit Yes 2
	33	* D 5 4Bit Yes 3
	34	* E 5 4Bit Yes None
	35	* F 16 2Bit Yes 4 [1]
	36	* G 7 4Bit Yes 5
	37	* H 10 4Bit[2] Yes 6
	38	* I 16 2Bit Yes None
	39	* J 12 2Bit Yes None
	40	* K 16 4Bit[2] No None
	41	* L 15 4Bit[2] No None
	42	* M 6 4Bit No IRQ_EINT
	43	* N 16 2Bit No IRQ_EINT
	44	* O 16 2Bit Yes 7
	45	* P 15 2Bit Yes 8
	46	* Q 9 2Bit Yes 9
	47	*
	48	* [1] BANKF pins 14,15 do not form part of the external interrupt sources
	49	* [2] BANK has two control registers, GPxCON0 and GPxCON1
	50	*/
	51
	52	#define OFF_GPCON (0x00)
	53	#define OFF_GPDAT (0x04)
	54
	55	#define con_4bit_shift(__off) ((__off) * 4)
	56
21b23664 BD	57	#if 1
	58	#define gpio_dbg(x...) do { } while(0)
	59	#else
beb9f4ed	60	#define gpio_dbg(x...) printk(KERN_DEBUG x)
21b23664 BD	61	#endif
21b23664 BD	62
89d043c3 BD	63	/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
	64	* the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
	65	* following example:
	66	*
	67	* base + 0x00: Control register, 4 bits per gpio
	68	* gpio n: 4 bits starting at (4*n)
	69	* 0000 = input, 0001 = output, others mean special-function
	70	* base + 0x04: Data register, 1 bit per gpio
	71	* bit n: data bit n
	72	*
	73	* Note, since the data register is one bit per gpio and is at base + 0x4
	74	* we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
	75	* the output.
	76	*/
	77
	78	static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
	79	{
	80	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	81	void __iomem *base = ourchip->base;
	82	unsigned long con;
	83
	84	con = __raw_readl(base + OFF_GPCON);
	85	con &= ~(0xf << con_4bit_shift(offset));
	86	__raw_writel(con, base + OFF_GPCON);
	87
21b23664 BD	88	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
21b23664 BD	89
89d043c3 BD	90	return 0;
	91	}
	92
	93	static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
	94	unsigned offset, int value)
	95	{
	96	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	97	void __iomem *base = ourchip->base;
	98	unsigned long con;
	99	unsigned long dat;
	100
	101	con = __raw_readl(base + OFF_GPCON);
	102	con &= ~(0xf << con_4bit_shift(offset));
	103	con \|= 0x1 << con_4bit_shift(offset);
	104
	105	dat = __raw_readl(base + OFF_GPDAT);
	106	if (value)
	107	dat \|= 1 << offset;
	108	else
	109	dat &= ~(1 << offset);
	110
	111	__raw_writel(dat, base + OFF_GPDAT);
	112	__raw_writel(con, base + OFF_GPCON);
	113	__raw_writel(dat, base + OFF_GPDAT);
	114
21b23664 BD	115	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
21b23664 BD	116
89d043c3 BD	117	return 0;
	118	}
	119
	120	/* The next set of routines are for the case where the GPIO configuration
	121	* registers are 4 bits per GPIO but there is more than one register (the
	122	* bank has more than 8 GPIOs.
	123	*
	124	* This case is the similar to the 4 bit case, but the registers are as
	125	* follows:
	126	*
	127	* base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
	128	* gpio n: 4 bits starting at (4*n)
	129	* 0000 = input, 0001 = output, others mean special-function
	130	* base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
	131	* gpio n: 4 bits starting at (4*n)
	132	* 0000 = input, 0001 = output, others mean special-function
	133	* base + 0x08: Data register, 1 bit per gpio
	134	* bit n: data bit n
	135	*
	136	* To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
	137	* store the 'base + 0x4' address so that these routines see the data
	138	* register at ourchip->base + 0x04.
	139	*/
	140
	141	static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
	142	{
	143	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	144	void __iomem *base = ourchip->base;
	145	void __iomem *regcon = base;
	146	unsigned long con;
	147
	148	if (offset > 7)
	149	offset -= 8;
	150	else
	151	regcon -= 4;
	152
	153	con = __raw_readl(regcon);
	154	con &= ~(0xf << con_4bit_shift(offset));
	155	__raw_writel(con, regcon);
	156
21b23664 BD	157	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
21b23664 BD	158
89d043c3 BD	159	return 0;
	160
	161	}
	162
	163	static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
	164	unsigned offset, int value)
	165	{
	166	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
	167	void __iomem *base = ourchip->base;
	168	void __iomem *regcon = base;
	169	unsigned long con;
	170	unsigned long dat;
	171
	172	if (offset > 7)
	173	offset -= 8;
	174	else
	175	regcon -= 4;
	176
	177	con = __raw_readl(regcon);
	178	con &= ~(0xf << con_4bit_shift(offset));
	179	con \|= 0x1 << con_4bit_shift(offset);
	180
	181	dat = __raw_readl(base + OFF_GPDAT);
	182	if (value)
	183	dat \|= 1 << offset;
	184	else
	185	dat &= ~(1 << offset);
	186
	187	__raw_writel(dat, base + OFF_GPDAT);
	188	__raw_writel(con, regcon);
	189	__raw_writel(dat, base + OFF_GPDAT);
	190
21b23664 BD	191	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
21b23664 BD	192
89d043c3 BD	193	return 0;
	194	}
	195
21b23664 BD	196	static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
	197	.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
	198	.set_pull = s3c_gpio_setpull_updown,
	199	.get_pull = s3c_gpio_getpull_updown,
	200	};
	201
	202	static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
	203	.cfg_eint = 7,
	204	.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
	205	.set_pull = s3c_gpio_setpull_updown,
	206	.get_pull = s3c_gpio_getpull_updown,
	207	};
	208
	209	static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
	210	.cfg_eint = 3,
	211	.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
	212	.set_pull = s3c_gpio_setpull_updown,
	213	.get_pull = s3c_gpio_getpull_updown,
	214	};
	215
89d043c3 BD	216	static struct s3c_gpio_chip gpio_4bit[] = {
	217	{
	218	.base = S3C64XX_GPA_BASE,
21b23664	219	.config = &gpio_4bit_cfg_eint0111,
89d043c3 BD	220	.chip = {
	221	.base = S3C64XX_GPA(0),
	222	.ngpio = S3C64XX_GPIO_A_NR,
	223	.label = "GPA",
	224	},
	225	}, {
	226	.base = S3C64XX_GPB_BASE,
21b23664	227	.config = &gpio_4bit_cfg_eint0111,
89d043c3 BD	228	.chip = {
	229	.base = S3C64XX_GPB(0),
	230	.ngpio = S3C64XX_GPIO_B_NR,
	231	.label = "GPB",
	232	},
	233	}, {
	234	.base = S3C64XX_GPC_BASE,
21b23664	235	.config = &gpio_4bit_cfg_eint0111,
89d043c3 BD	236	.chip = {
	237	.base = S3C64XX_GPC(0),
	238	.ngpio = S3C64XX_GPIO_C_NR,
	239	.label = "GPC",
	240	},
	241	}, {
	242	.base = S3C64XX_GPD_BASE,
21b23664	243	.config = &gpio_4bit_cfg_eint0111,
89d043c3 BD	244	.chip = {
	245	.base = S3C64XX_GPD(0),
	246	.ngpio = S3C64XX_GPIO_D_NR,
	247	.label = "GPD",
	248	},
	249	}, {
	250	.base = S3C64XX_GPE_BASE,
21b23664	251	.config = &gpio_4bit_cfg_noint,
89d043c3 BD	252	.chip = {
	253	.base = S3C64XX_GPE(0),
	254	.ngpio = S3C64XX_GPIO_E_NR,
	255	.label = "GPE",
	256	},
	257	}, {
	258	.base = S3C64XX_GPG_BASE,
21b23664	259	.config = &gpio_4bit_cfg_eint0111,
89d043c3 BD	260	.chip = {
	261	.base = S3C64XX_GPG(0),
	262	.ngpio = S3C64XX_GPIO_G_NR,
	263	.label = "GPG",
	264	},
	265	}, {
	266	.base = S3C64XX_GPM_BASE,
21b23664	267	.config = &gpio_4bit_cfg_eint0011,
89d043c3 BD	268	.chip = {
	269	.base = S3C64XX_GPM(0),
	270	.ngpio = S3C64XX_GPIO_M_NR,
	271	.label = "GPM",
	272	},
	273	},
	274	};
	275
	276	static struct s3c_gpio_chip gpio_4bit2[] = {
	277	{
	278	.base = S3C64XX_GPH_BASE + 0x4,
21b23664	279	.config = &gpio_4bit_cfg_eint0111,
89d043c3 BD	280	.chip = {
	281	.base = S3C64XX_GPH(0),
	282	.ngpio = S3C64XX_GPIO_H_NR,
	283	.label = "GPH",
	284	},
	285	}, {
	286	.base = S3C64XX_GPK_BASE + 0x4,
21b23664	287	.config = &gpio_4bit_cfg_noint,
89d043c3 BD	288	.chip = {
	289	.base = S3C64XX_GPK(0),
	290	.ngpio = S3C64XX_GPIO_K_NR,
	291	.label = "GPK",
	292	},
	293	}, {
	294	.base = S3C64XX_GPL_BASE + 0x4,
21b23664	295	.config = &gpio_4bit_cfg_eint0011,
89d043c3 BD	296	.chip = {
	297	.base = S3C64XX_GPL(0),
	298	.ngpio = S3C64XX_GPIO_L_NR,
	299	.label = "GPL",
	300	},
	301	},
	302	};
	303
21b23664 BD	304	static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
	305	.set_config = s3c_gpio_setcfg_s3c24xx,
	306	.set_pull = s3c_gpio_setpull_updown,
	307	.get_pull = s3c_gpio_getpull_updown,
	308	};
	309
	310	static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
	311	.cfg_eint = 2,
	312	.set_config = s3c_gpio_setcfg_s3c24xx,
	313	.set_pull = s3c_gpio_setpull_updown,
	314	.get_pull = s3c_gpio_getpull_updown,
	315	};
	316
	317	static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
	318	.cfg_eint = 3,
	319	.set_config = s3c_gpio_setcfg_s3c24xx,
	320	.set_pull = s3c_gpio_setpull_updown,
	321	.get_pull = s3c_gpio_getpull_updown,
	322	};
	323
0b495737 MS	324	int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
	325	{
	326	return IRQ_EINT(0) + pin;
	327	}
	328
89d043c3 BD	329	static struct s3c_gpio_chip gpio_2bit[] = {
	330	{
	331	.base = S3C64XX_GPF_BASE,
21b23664	332	.config = &gpio_2bit_cfg_eint11,
89d043c3 BD	333	.chip = {
	334	.base = S3C64XX_GPF(0),
	335	.ngpio = S3C64XX_GPIO_F_NR,
	336	.label = "GPF",
	337	},
	338	}, {
	339	.base = S3C64XX_GPI_BASE,
21b23664	340	.config = &gpio_2bit_cfg_noint,
89d043c3 BD	341	.chip = {
	342	.base = S3C64XX_GPI(0),
	343	.ngpio = S3C64XX_GPIO_I_NR,
	344	.label = "GPI",
	345	},
	346	}, {
	347	.base = S3C64XX_GPJ_BASE,
21b23664	348	.config = &gpio_2bit_cfg_noint,
89d043c3 BD	349	.chip = {
	350	.base = S3C64XX_GPJ(0),
	351	.ngpio = S3C64XX_GPIO_J_NR,
	352	.label = "GPJ",
	353	},
	354	}, {
	355	.base = S3C64XX_GPN_BASE,
21b23664	356	.config = &gpio_2bit_cfg_eint10,
89d043c3 BD	357	.chip = {
	358	.base = S3C64XX_GPN(0),
	359	.ngpio = S3C64XX_GPIO_N_NR,
	360	.label = "GPN",
0b495737	361	.to_irq = s3c64xx_gpio2int_gpn,
89d043c3 BD	362	},
	363	}, {
	364	.base = S3C64XX_GPO_BASE,
21b23664	365	.config = &gpio_2bit_cfg_eint11,
89d043c3 BD	366	.chip = {
	367	.base = S3C64XX_GPO(0),
	368	.ngpio = S3C64XX_GPIO_O_NR,
	369	.label = "GPO",
	370	},
	371	}, {
	372	.base = S3C64XX_GPP_BASE,
21b23664	373	.config = &gpio_2bit_cfg_eint11,
89d043c3 BD	374	.chip = {
	375	.base = S3C64XX_GPP(0),
	376	.ngpio = S3C64XX_GPIO_P_NR,
	377	.label = "GPP",
	378	},
	379	}, {
	380	.base = S3C64XX_GPQ_BASE,
21b23664	381	.config = &gpio_2bit_cfg_eint11,
89d043c3 BD	382	.chip = {
	383	.base = S3C64XX_GPQ(0),
	384	.ngpio = S3C64XX_GPIO_Q_NR,
	385	.label = "GPQ",
	386	},
	387	},
	388	};
	389
	390	static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
	391	{
	392	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
	393	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
d87964c4	394	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
89d043c3 BD	395	}
	396
	397	static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
	398	{
	399	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
	400	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
d87964c4 BD	401	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
	402	}
	403
	404	static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
	405	{
	406	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
89d043c3 BD	407	}
	408
	409	static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
	410	int nr_chips,
	411	void (fn)(struct s3c_gpio_chip ))
	412	{
	413	for (; nr_chips > 0; nr_chips--, chips++) {
	414	if (fn)
	415	(fn)(chips);
	416	s3c_gpiolib_add(chips);
	417	}
	418	}
	419
	420	static __init int s3c64xx_gpiolib_init(void)
	421	{
	422	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
	423	s3c64xx_gpiolib_add_4bit);
	424
	425	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
	426	s3c64xx_gpiolib_add_4bit2);
	427
d87964c4 BD	428	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
d87964c4 BD	429	s3c64xx_gpiolib_add_2bit);
89d043c3 BD	430
	431	return 0;
	432	}
	433
24d40767	434	core_initcall(s3c64xx_gpiolib_init);