Commit | Line | Data |
---|---|---|
1950fab0 KM |
1 | /* |
2 | * Device Tree Source for the Salvator-X board | |
3 | * | |
4 | * Copyright (C) 2015 Renesas Electronics Corp. | |
5 | * | |
6 | * This file is licensed under the terms of the GNU General Public License | |
7 | * version 2. This program is licensed "as is" without any warranty of any | |
8 | * kind, whether express or implied. | |
9 | */ | |
10 | ||
672b7931 KM |
11 | /* |
12 | * SSI-AK4613 | |
13 | * | |
14 | * This command is required when Playback/Capture | |
15 | * | |
16 | * amixer set "DVC Out" 100% | |
17 | * amixer set "DVC In" 100% | |
18 | * | |
19 | * You can use Mute | |
20 | * | |
21 | * amixer set "DVC Out Mute" on | |
22 | * amixer set "DVC In Mute" on | |
23 | * | |
24 | * You can use Volume Ramp | |
25 | * | |
26 | * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" | |
27 | * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" | |
28 | * amixer set "DVC Out Ramp" on | |
29 | * aplay xxx.wav & | |
30 | * amixer set "DVC Out" 80% // Volume Down | |
31 | * amixer set "DVC Out" 100% // Volume Up | |
32 | */ | |
33 | ||
1950fab0 KM |
34 | /dts-v1/; |
35 | #include "r8a7795.dtsi" | |
1c0e7b9a | 36 | #include <dt-bindings/gpio/gpio.h> |
1950fab0 KM |
37 | |
38 | / { | |
39 | model = "Renesas Salvator-X board based on r8a7795"; | |
40 | compatible = "renesas,salvator-x", "renesas,r8a7795"; | |
41 | ||
42 | aliases { | |
43 | serial0 = &scif2; | |
44 | serial1 = &scif1; | |
10ca6db7 | 45 | ethernet0 = &avb; |
1950fab0 KM |
46 | }; |
47 | ||
48 | chosen { | |
b2407c56 | 49 | bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; |
1950fab0 KM |
50 | stdout-path = "serial0:115200n8"; |
51 | }; | |
52 | ||
53 | memory@48000000 { | |
54 | device_type = "memory"; | |
55 | /* first 128MB is reserved for secure area. */ | |
56 | reg = <0x0 0x48000000 0x0 0x38000000>; | |
57 | }; | |
994aadf0 KM |
58 | |
59 | x12_clk: x12_clk { | |
60 | compatible = "fixed-clock"; | |
61 | #clock-cells = <0>; | |
62 | clock-frequency = <24576000>; | |
63 | }; | |
64 | ||
1c0e7b9a AK |
65 | vcc_sdhi0: regulator@1 { |
66 | compatible = "regulator-fixed"; | |
67 | ||
68 | regulator-name = "SDHI0 Vcc"; | |
69 | regulator-min-microvolt = <3300000>; | |
70 | regulator-max-microvolt = <3300000>; | |
71 | ||
72 | gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; | |
73 | enable-active-high; | |
74 | }; | |
75 | ||
76 | vccq_sdhi0: regulator@2 { | |
77 | compatible = "regulator-gpio"; | |
78 | ||
79 | regulator-name = "SDHI0 VccQ"; | |
80 | regulator-min-microvolt = <1800000>; | |
81 | regulator-max-microvolt = <3300000>; | |
82 | ||
83 | gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; | |
84 | gpios-states = <1>; | |
85 | states = <3300000 1 | |
86 | 1800000 0>; | |
87 | }; | |
88 | ||
89 | vcc_sdhi3: regulator@3 { | |
90 | compatible = "regulator-fixed"; | |
91 | ||
92 | regulator-name = "SDHI3 Vcc"; | |
93 | regulator-min-microvolt = <3300000>; | |
94 | regulator-max-microvolt = <3300000>; | |
95 | ||
96 | gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; | |
97 | enable-active-high; | |
98 | }; | |
99 | ||
100 | vccq_sdhi3: regulator@4 { | |
101 | compatible = "regulator-gpio"; | |
102 | ||
103 | regulator-name = "SDHI3 VccQ"; | |
104 | regulator-min-microvolt = <1800000>; | |
105 | regulator-max-microvolt = <3300000>; | |
106 | ||
107 | gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; | |
108 | gpios-states = <1>; | |
109 | states = <3300000 1 | |
110 | 1800000 0>; | |
111 | }; | |
112 | ||
8a8f181d KM |
113 | audio_clkout: audio_clkout { |
114 | /* | |
115 | * This is same as <&rcar_sound 0> | |
116 | * but needed to avoid cs2000/rcar_sound probe dead-lock | |
117 | */ | |
118 | compatible = "fixed-clock"; | |
119 | #clock-cells = <0>; | |
120 | clock-frequency = <11289600>; | |
121 | }; | |
122 | ||
994aadf0 KM |
123 | rsnd_ak4613: sound { |
124 | compatible = "simple-audio-card"; | |
125 | ||
126 | simple-audio-card,format = "left_j"; | |
127 | simple-audio-card,bitclock-master = <&sndcpu>; | |
128 | simple-audio-card,frame-master = <&sndcpu>; | |
129 | ||
130 | sndcpu: simple-audio-card,cpu { | |
131 | sound-dai = <&rcar_sound>; | |
132 | }; | |
133 | ||
134 | sndcodec: simple-audio-card,codec { | |
135 | sound-dai = <&ak4613>; | |
136 | }; | |
137 | }; | |
1950fab0 KM |
138 | }; |
139 | ||
140 | &extal_clk { | |
141 | clock-frequency = <16666666>; | |
142 | }; | |
143 | ||
de5a79f1 WS |
144 | &extalr_clk { |
145 | clock-frequency = <32768>; | |
146 | }; | |
147 | ||
1950fab0 | 148 | &pfc { |
a3fc85e2 GU |
149 | pinctrl-0 = <&scif_clk_pins>; |
150 | pinctrl-names = "default"; | |
151 | ||
1950fab0 KM |
152 | scif1_pins: scif1 { |
153 | renesas,groups = "scif1_data_a", "scif1_ctrl"; | |
154 | renesas,function = "scif1"; | |
155 | }; | |
156 | scif2_pins: scif2 { | |
157 | renesas,groups = "scif2_data_a"; | |
158 | renesas,function = "scif2"; | |
159 | }; | |
a3fc85e2 GU |
160 | scif_clk_pins: scif_clk { |
161 | renesas,groups = "scif_clk_a"; | |
162 | renesas,function = "scif_clk"; | |
163 | }; | |
6fa501c5 | 164 | |
637d801e KM |
165 | i2c2_pins: i2c2 { |
166 | renesas,groups = "i2c2_a"; | |
167 | renesas,function = "i2c2"; | |
168 | }; | |
169 | ||
6fa501c5 KM |
170 | avb_pins: avb { |
171 | renesas,groups = "avb_mdc"; | |
172 | renesas,function = "avb"; | |
173 | }; | |
994aadf0 | 174 | |
1c0e7b9a AK |
175 | sdhi0_pins: sd0 { |
176 | renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; | |
177 | renesas,function = "sdhi0"; | |
178 | }; | |
179 | ||
180 | sdhi3_pins: sd3 { | |
181 | renesas,groups = "sdhi3_data4", "sdhi3_ctrl"; | |
182 | renesas,function = "sdhi3"; | |
183 | }; | |
184 | ||
994aadf0 KM |
185 | sound_pins: sound { |
186 | renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; | |
187 | renesas,function = "ssi"; | |
188 | }; | |
189 | ||
190 | sound_clk_pins: sound_clk { | |
191 | renesas,groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", | |
192 | "audio_clkout_a", "audio_clkout3_a"; | |
193 | renesas,function = "audio_clk"; | |
194 | }; | |
e24250c0 YS |
195 | |
196 | usb1_pins: usb1 { | |
197 | renesas,groups = "usb1"; | |
198 | renesas,function = "usb1"; | |
199 | }; | |
200 | ||
201 | usb2_pins: usb2 { | |
202 | renesas,groups = "usb2"; | |
203 | renesas,function = "usb2"; | |
204 | }; | |
1950fab0 KM |
205 | }; |
206 | ||
207 | &scif1 { | |
208 | pinctrl-0 = <&scif1_pins>; | |
209 | pinctrl-names = "default"; | |
210 | ||
211 | status = "okay"; | |
212 | }; | |
213 | ||
214 | &scif2 { | |
215 | pinctrl-0 = <&scif2_pins>; | |
216 | pinctrl-names = "default"; | |
217 | ||
218 | status = "okay"; | |
219 | }; | |
6fa501c5 | 220 | |
a3fc85e2 GU |
221 | &scif_clk { |
222 | clock-frequency = <14745600>; | |
223 | status = "okay"; | |
224 | }; | |
225 | ||
637d801e KM |
226 | &i2c2 { |
227 | pinctrl-0 = <&i2c2_pins>; | |
228 | pinctrl-names = "default"; | |
229 | ||
230 | status = "okay"; | |
994aadf0 KM |
231 | |
232 | clock-frequency = <100000>; | |
233 | ||
234 | ak4613: codec@10 { | |
235 | compatible = "asahi-kasei,ak4613"; | |
236 | #sound-dai-cells = <0>; | |
237 | reg = <0x10>; | |
238 | clocks = <&rcar_sound 3>; | |
40fbe14b KM |
239 | |
240 | asahi-kasei,in1-single-end; | |
241 | asahi-kasei,in2-single-end; | |
242 | asahi-kasei,out1-single-end; | |
243 | asahi-kasei,out2-single-end; | |
244 | asahi-kasei,out3-single-end; | |
245 | asahi-kasei,out4-single-end; | |
246 | asahi-kasei,out5-single-end; | |
247 | asahi-kasei,out6-single-end; | |
994aadf0 | 248 | }; |
8a8f181d KM |
249 | |
250 | cs2000: clk_multiplier@4f { | |
251 | #clock-cells = <0>; | |
252 | compatible = "cirrus,cs2000-cp"; | |
253 | reg = <0x4f>; | |
254 | clocks = <&audio_clkout>, <&x12_clk>; | |
255 | clock-names = "clk_in", "ref_clk"; | |
256 | ||
257 | assigned-clocks = <&cs2000>; | |
258 | assigned-clock-rates = <24576000>; /* 1/1 divide */ | |
259 | }; | |
994aadf0 KM |
260 | }; |
261 | ||
262 | &rcar_sound { | |
263 | pinctrl-0 = <&sound_pins &sound_clk_pins>; | |
264 | pinctrl-names = "default"; | |
265 | ||
266 | /* Single DAI */ | |
267 | #sound-dai-cells = <0>; | |
268 | ||
269 | /* audio_clkout0/1/2/3 */ | |
270 | #clock-cells = <1>; | |
271 | clock-frequency = <11289600>; | |
272 | ||
273 | status = "okay"; | |
274 | ||
8a8f181d KM |
275 | /* update <audio_clk_b> to <cs2000> */ |
276 | clocks = <&cpg CPG_MOD 1005>, | |
277 | <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, | |
278 | <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, | |
279 | <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, | |
280 | <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, | |
281 | <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, | |
282 | <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, | |
283 | <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, | |
284 | <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, | |
285 | <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, | |
286 | <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, | |
287 | <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, | |
288 | <&audio_clk_a>, <&cs2000>, | |
289 | <&audio_clk_c>, | |
290 | <&cpg CPG_CORE R8A7795_CLK_S0D4>; | |
291 | ||
994aadf0 KM |
292 | rcar_sound,dai { |
293 | dai0 { | |
672b7931 KM |
294 | playback = <&ssi0 &src0 &dvc0>; |
295 | capture = <&ssi1 &src1 &dvc1>; | |
994aadf0 KM |
296 | }; |
297 | }; | |
298 | }; | |
299 | ||
52ee9fb3 KA |
300 | &sata { |
301 | status = "okay"; | |
302 | }; | |
303 | ||
1c0e7b9a AK |
304 | &sdhi0 { |
305 | pinctrl-0 = <&sdhi0_pins>; | |
306 | pinctrl-names = "default"; | |
307 | ||
308 | vmmc-supply = <&vcc_sdhi0>; | |
309 | vqmmc-supply = <&vccq_sdhi0>; | |
310 | cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; | |
311 | wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; | |
312 | bus-width = <4>; | |
313 | status = "okay"; | |
314 | }; | |
315 | ||
316 | &sdhi3 { | |
317 | pinctrl-0 = <&sdhi3_pins>; | |
318 | pinctrl-names = "default"; | |
319 | ||
320 | vmmc-supply = <&vcc_sdhi3>; | |
321 | vqmmc-supply = <&vccq_sdhi3>; | |
322 | cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; | |
323 | wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; | |
324 | bus-width = <4>; | |
325 | status = "okay"; | |
326 | }; | |
327 | ||
994aadf0 | 328 | &ssi1 { |
994aadf0 KM |
329 | shared-pin; |
330 | }; | |
331 | ||
332 | &audio_clk_a { | |
333 | clock-frequency = <22579200>; | |
637d801e KM |
334 | }; |
335 | ||
6fa501c5 KM |
336 | &avb { |
337 | pinctrl-0 = <&avb_pins>; | |
338 | pinctrl-names = "default"; | |
339 | renesas,no-ether-link; | |
340 | phy-handle = <&phy0>; | |
341 | status = "okay"; | |
342 | ||
343 | phy0: ethernet-phy@0 { | |
344 | rxc-skew-ps = <900>; | |
345 | rxdv-skew-ps = <0>; | |
346 | rxd0-skew-ps = <0>; | |
347 | rxd1-skew-ps = <0>; | |
348 | rxd2-skew-ps = <0>; | |
349 | rxd3-skew-ps = <0>; | |
350 | txc-skew-ps = <900>; | |
351 | txen-skew-ps = <0>; | |
352 | txd0-skew-ps = <0>; | |
353 | txd1-skew-ps = <0>; | |
354 | txd2-skew-ps = <0>; | |
355 | txd3-skew-ps = <0>; | |
356 | reg = <0>; | |
357 | interrupt-parent = <&gpio2>; | |
358 | interrupts = <11 IRQ_TYPE_LEVEL_LOW>; | |
359 | }; | |
360 | }; | |
856ea9ed YS |
361 | |
362 | &xhci0 { | |
363 | status = "okay"; | |
364 | }; | |
e24250c0 YS |
365 | |
366 | &usb2_phy1 { | |
367 | pinctrl-0 = <&usb1_pins>; | |
368 | pinctrl-names = "default"; | |
369 | ||
370 | status = "okay"; | |
371 | }; | |
372 | ||
373 | &usb2_phy2 { | |
374 | pinctrl-0 = <&usb2_pins>; | |
375 | pinctrl-names = "default"; | |
376 | ||
377 | status = "okay"; | |
378 | }; | |
474efcae YS |
379 | |
380 | &ehci1 { | |
381 | status = "okay"; | |
382 | }; | |
383 | ||
384 | &ehci2 { | |
385 | status = "okay"; | |
386 | }; | |
387 | ||
388 | &ohci1 { | |
389 | status = "okay"; | |
390 | }; | |
391 | ||
392 | &ohci2 { | |
393 | status = "okay"; | |
394 | }; | |
bbd27304 PE |
395 | |
396 | &pcie_bus_clk { | |
397 | status = "okay"; | |
398 | }; | |
399 | ||
400 | &pciec0 { | |
401 | status = "okay"; | |
402 | }; | |
403 | ||
404 | &pciec1 { | |
405 | status = "okay"; | |
406 | }; |