Commit | Line | Data |
---|---|---|
9db144fe MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/cm-bf527.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2008 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/mtd/physmap.h> | |
36 | #include <linux/spi/spi.h> | |
37 | #include <linux/spi/flash.h> | |
38 | #include <linux/etherdevice.h> | |
39 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
40 | #include <linux/usb/isp1362.h> | |
41 | #endif | |
9db144fe MH |
42 | #include <linux/i2c.h> |
43 | #include <linux/irq.h> | |
44 | #include <linux/interrupt.h> | |
45 | #include <linux/usb/sl811.h> | |
9db144fe | 46 | #include <linux/usb/musb.h> |
9db144fe MH |
47 | #include <asm/dma.h> |
48 | #include <asm/bfin5xx_spi.h> | |
49 | #include <asm/reboot.h> | |
50 | #include <asm/nand.h> | |
51 | #include <asm/portmux.h> | |
52 | #include <asm/dpmc.h> | |
53 | #include <linux/spi/ad7877.h> | |
54 | ||
55 | /* | |
56 | * Name the Board for the /proc/cpuinfo | |
57 | */ | |
58 | const char bfin_board_name[] = "Bluetechnix CM-BF527"; | |
59 | ||
60 | /* | |
61 | * Driver needs to know address, irq and flag pin. | |
62 | */ | |
63 | ||
9db144fe | 64 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
3f375690 MH |
65 | #include <linux/usb/isp1760.h> |
66 | static struct resource bfin_isp1760_resources[] = { | |
9db144fe | 67 | [0] = { |
3f375690 MH |
68 | .start = 0x203C0000, |
69 | .end = 0x203C0000 + 0x000fffff, | |
9db144fe MH |
70 | .flags = IORESOURCE_MEM, |
71 | }, | |
72 | [1] = { | |
3f375690 MH |
73 | .start = IRQ_PF7, |
74 | .end = IRQ_PF7, | |
9db144fe MH |
75 | .flags = IORESOURCE_IRQ, |
76 | }, | |
77 | }; | |
78 | ||
3f375690 MH |
79 | static struct isp1760_platform_data isp1760_priv = { |
80 | .is_isp1761 = 0, | |
3f375690 MH |
81 | .bus_width_16 = 1, |
82 | .port1_otg = 0, | |
83 | .analog_oc = 0, | |
84 | .dack_polarity_high = 0, | |
85 | .dreq_polarity_high = 0, | |
9db144fe MH |
86 | }; |
87 | ||
3f375690 MH |
88 | static struct platform_device bfin_isp1760_device = { |
89 | .name = "isp1760-hcd", | |
90 | .id = 0, | |
91 | .dev = { | |
92 | .platform_data = &isp1760_priv, | |
93 | }, | |
94 | .num_resources = ARRAY_SIZE(bfin_isp1760_resources), | |
95 | .resource = bfin_isp1760_resources, | |
9db144fe | 96 | }; |
9db144fe MH |
97 | #endif |
98 | ||
99 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
100 | static struct resource musb_resources[] = { | |
101 | [0] = { | |
102 | .start = 0xffc03800, | |
103 | .end = 0xffc03cff, | |
104 | .flags = IORESOURCE_MEM, | |
105 | }, | |
106 | [1] = { /* general IRQ */ | |
107 | .start = IRQ_USB_INT0, | |
108 | .end = IRQ_USB_INT0, | |
109 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
110 | }, | |
111 | [2] = { /* DMA IRQ */ | |
112 | .start = IRQ_USB_DMA, | |
113 | .end = IRQ_USB_DMA, | |
114 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
115 | }, | |
116 | }; | |
117 | ||
50041acb BW |
118 | static struct musb_hdrc_config musb_config = { |
119 | .multipoint = 0, | |
120 | .dyn_fifo = 0, | |
121 | .soft_con = 1, | |
122 | .dma = 1, | |
fea05dac BW |
123 | .num_eps = 8, |
124 | .dma_channels = 8, | |
50041acb BW |
125 | .gpio_vrsel = GPIO_PF11, |
126 | }; | |
127 | ||
9db144fe MH |
128 | static struct musb_hdrc_platform_data musb_plat = { |
129 | #if defined(CONFIG_USB_MUSB_OTG) | |
130 | .mode = MUSB_OTG, | |
131 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
132 | .mode = MUSB_HOST, | |
133 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
134 | .mode = MUSB_PERIPHERAL, | |
135 | #endif | |
50041acb | 136 | .config = &musb_config, |
9db144fe MH |
137 | }; |
138 | ||
139 | static u64 musb_dmamask = ~(u32)0; | |
140 | ||
141 | static struct platform_device musb_device = { | |
142 | .name = "musb_hdrc", | |
143 | .id = 0, | |
144 | .dev = { | |
145 | .dma_mask = &musb_dmamask, | |
146 | .coherent_dma_mask = 0xffffffff, | |
147 | .platform_data = &musb_plat, | |
148 | }, | |
149 | .num_resources = ARRAY_SIZE(musb_resources), | |
150 | .resource = musb_resources, | |
151 | }; | |
152 | #endif | |
153 | ||
154 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
155 | static struct mtd_partition ezkit_partitions[] = { | |
156 | { | |
aa582977 | 157 | .name = "bootloader(nor)", |
9db144fe MH |
158 | .size = 0x40000, |
159 | .offset = 0, | |
160 | }, { | |
aa582977 | 161 | .name = "linux kernel(nor)", |
9db144fe MH |
162 | .size = 0x1C0000, |
163 | .offset = MTDPART_OFS_APPEND, | |
164 | }, { | |
aa582977 | 165 | .name = "file system(nor)", |
9db144fe MH |
166 | .size = MTDPART_SIZ_FULL, |
167 | .offset = MTDPART_OFS_APPEND, | |
168 | } | |
169 | }; | |
170 | ||
171 | static struct physmap_flash_data ezkit_flash_data = { | |
172 | .width = 2, | |
173 | .parts = ezkit_partitions, | |
174 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
175 | }; | |
176 | ||
177 | static struct resource ezkit_flash_resource = { | |
178 | .start = 0x20000000, | |
179 | .end = 0x201fffff, | |
180 | .flags = IORESOURCE_MEM, | |
181 | }; | |
182 | ||
183 | static struct platform_device ezkit_flash_device = { | |
184 | .name = "physmap-flash", | |
185 | .id = 0, | |
186 | .dev = { | |
187 | .platform_data = &ezkit_flash_data, | |
188 | }, | |
189 | .num_resources = 1, | |
190 | .resource = &ezkit_flash_resource, | |
191 | }; | |
192 | #endif | |
193 | ||
194 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
195 | static struct mtd_partition partition_info[] = { | |
196 | { | |
aa582977 | 197 | .name = "linux kernel(nand)", |
9db144fe | 198 | .offset = 0, |
f4585a08 | 199 | .size = 4 * 1024 * 1024, |
9db144fe MH |
200 | }, |
201 | { | |
aa582977 | 202 | .name = "file system(nand)", |
9db144fe MH |
203 | .offset = MTDPART_OFS_APPEND, |
204 | .size = MTDPART_SIZ_FULL, | |
205 | }, | |
206 | }; | |
207 | ||
208 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
209 | .page_size = NFC_PG_SIZE_256, | |
210 | .data_width = NFC_NWIDTH_8, | |
211 | .partitions = partition_info, | |
212 | .nr_partitions = ARRAY_SIZE(partition_info), | |
213 | .rd_dly = 3, | |
214 | .wr_dly = 3, | |
215 | }; | |
216 | ||
217 | static struct resource bf5xx_nand_resources[] = { | |
218 | { | |
219 | .start = NFC_CTL, | |
220 | .end = NFC_DATA_RD + 2, | |
221 | .flags = IORESOURCE_MEM, | |
222 | }, | |
223 | { | |
224 | .start = CH_NFC, | |
225 | .end = CH_NFC, | |
226 | .flags = IORESOURCE_IRQ, | |
227 | }, | |
228 | }; | |
229 | ||
230 | static struct platform_device bf5xx_nand_device = { | |
231 | .name = "bf5xx-nand", | |
232 | .id = 0, | |
233 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
234 | .resource = bf5xx_nand_resources, | |
235 | .dev = { | |
236 | .platform_data = &bf5xx_nand_platform, | |
237 | }, | |
238 | }; | |
239 | #endif | |
240 | ||
241 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
242 | static struct resource bfin_pcmcia_cf_resources[] = { | |
243 | { | |
244 | .start = 0x20310000, /* IO PORT */ | |
245 | .end = 0x20312000, | |
246 | .flags = IORESOURCE_MEM, | |
247 | }, { | |
248 | .start = 0x20311000, /* Attribute Memory */ | |
249 | .end = 0x20311FFF, | |
250 | .flags = IORESOURCE_MEM, | |
251 | }, { | |
252 | .start = IRQ_PF4, | |
253 | .end = IRQ_PF4, | |
254 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
255 | }, { | |
256 | .start = 6, /* Card Detect PF6 */ | |
257 | .end = 6, | |
258 | .flags = IORESOURCE_IRQ, | |
259 | }, | |
260 | }; | |
261 | ||
262 | static struct platform_device bfin_pcmcia_cf_device = { | |
263 | .name = "bfin_cf_pcmcia", | |
264 | .id = -1, | |
265 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
266 | .resource = bfin_pcmcia_cf_resources, | |
267 | }; | |
268 | #endif | |
269 | ||
270 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
271 | static struct platform_device rtc_device = { | |
272 | .name = "rtc-bfin", | |
273 | .id = -1, | |
274 | }; | |
275 | #endif | |
276 | ||
277 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
61f09b5a MH |
278 | #include <linux/smc91x.h> |
279 | ||
280 | static struct smc91x_platdata smc91x_info = { | |
281 | .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, | |
282 | .leda = RPC_LED_100_10, | |
283 | .ledb = RPC_LED_TX_RX, | |
284 | }; | |
285 | ||
9db144fe MH |
286 | static struct resource smc91x_resources[] = { |
287 | { | |
288 | .name = "smc91x-regs", | |
289 | .start = 0x20300300, | |
290 | .end = 0x20300300 + 16, | |
291 | .flags = IORESOURCE_MEM, | |
292 | }, { | |
293 | ||
294 | .start = IRQ_PF7, | |
295 | .end = IRQ_PF7, | |
296 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
297 | }, | |
298 | }; | |
299 | static struct platform_device smc91x_device = { | |
300 | .name = "smc91x", | |
301 | .id = 0, | |
302 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
303 | .resource = smc91x_resources, | |
61f09b5a MH |
304 | .dev = { |
305 | .platform_data = &smc91x_info, | |
306 | }, | |
9db144fe MH |
307 | }; |
308 | #endif | |
309 | ||
310 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
311 | static struct resource dm9000_resources[] = { | |
312 | [0] = { | |
313 | .start = 0x203FB800, | |
b3dec4a4 | 314 | .end = 0x203FB800 + 1, |
9db144fe MH |
315 | .flags = IORESOURCE_MEM, |
316 | }, | |
317 | [1] = { | |
b3dec4a4 BS |
318 | .start = 0x203FB804, |
319 | .end = 0x203FB804 + 1, | |
320 | .flags = IORESOURCE_MEM, | |
321 | }, | |
322 | [2] = { | |
9db144fe MH |
323 | .start = IRQ_PF9, |
324 | .end = IRQ_PF9, | |
325 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), | |
326 | }, | |
327 | }; | |
328 | ||
329 | static struct platform_device dm9000_device = { | |
330 | .name = "dm9000", | |
331 | .id = -1, | |
332 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
333 | .resource = dm9000_resources, | |
334 | }; | |
335 | #endif | |
336 | ||
337 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
338 | static struct resource sl811_hcd_resources[] = { | |
339 | { | |
340 | .start = 0x20340000, | |
341 | .end = 0x20340000, | |
342 | .flags = IORESOURCE_MEM, | |
343 | }, { | |
344 | .start = 0x20340004, | |
345 | .end = 0x20340004, | |
346 | .flags = IORESOURCE_MEM, | |
347 | }, { | |
348 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
349 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
350 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
351 | }, | |
352 | }; | |
353 | ||
354 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
355 | void sl811_port_power(struct device *dev, int is_on) | |
356 | { | |
357 | gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); | |
358 | gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); | |
359 | } | |
360 | #endif | |
361 | ||
362 | static struct sl811_platform_data sl811_priv = { | |
363 | .potpg = 10, | |
364 | .power = 250, /* == 500mA */ | |
365 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
366 | .port_power = &sl811_port_power, | |
367 | #endif | |
368 | }; | |
369 | ||
370 | static struct platform_device sl811_hcd_device = { | |
371 | .name = "sl811-hcd", | |
372 | .id = 0, | |
373 | .dev = { | |
374 | .platform_data = &sl811_priv, | |
375 | }, | |
376 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
377 | .resource = sl811_hcd_resources, | |
378 | }; | |
379 | #endif | |
380 | ||
381 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
382 | static struct resource isp1362_hcd_resources[] = { | |
383 | { | |
384 | .start = 0x20360000, | |
385 | .end = 0x20360000, | |
386 | .flags = IORESOURCE_MEM, | |
387 | }, { | |
388 | .start = 0x20360004, | |
389 | .end = 0x20360004, | |
390 | .flags = IORESOURCE_MEM, | |
391 | }, { | |
392 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
393 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
394 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
395 | }, | |
396 | }; | |
397 | ||
398 | static struct isp1362_platform_data isp1362_priv = { | |
399 | .sel15Kres = 1, | |
400 | .clknotstop = 0, | |
401 | .oc_enable = 0, | |
402 | .int_act_high = 0, | |
403 | .int_edge_triggered = 0, | |
404 | .remote_wakeup_connected = 0, | |
405 | .no_power_switching = 1, | |
406 | .power_switching_mode = 0, | |
407 | }; | |
408 | ||
409 | static struct platform_device isp1362_hcd_device = { | |
410 | .name = "isp1362-hcd", | |
411 | .id = 0, | |
412 | .dev = { | |
413 | .platform_data = &isp1362_priv, | |
414 | }, | |
415 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
416 | .resource = isp1362_hcd_resources, | |
417 | }; | |
418 | #endif | |
419 | ||
420 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
65319628 GY |
421 | static struct platform_device bfin_mii_bus = { |
422 | .name = "bfin_mii_bus", | |
423 | }; | |
424 | ||
9db144fe MH |
425 | static struct platform_device bfin_mac_device = { |
426 | .name = "bfin_mac", | |
65319628 | 427 | .dev.platform_data = &bfin_mii_bus, |
9db144fe MH |
428 | }; |
429 | #endif | |
430 | ||
431 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
432 | static struct resource net2272_bfin_resources[] = { | |
433 | { | |
434 | .start = 0x20300000, | |
435 | .end = 0x20300000 + 0x100, | |
436 | .flags = IORESOURCE_MEM, | |
437 | }, { | |
438 | .start = IRQ_PF7, | |
439 | .end = IRQ_PF7, | |
440 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
441 | }, | |
442 | }; | |
443 | ||
444 | static struct platform_device net2272_bfin_device = { | |
445 | .name = "net2272", | |
446 | .id = -1, | |
447 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
448 | .resource = net2272_bfin_resources, | |
449 | }; | |
450 | #endif | |
451 | ||
452 | #if defined(CONFIG_MTD_M25P80) \ | |
453 | || defined(CONFIG_MTD_M25P80_MODULE) | |
454 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
455 | { | |
aa582977 | 456 | .name = "bootloader(spi)", |
9db144fe MH |
457 | .size = 0x00040000, |
458 | .offset = 0, | |
459 | .mask_flags = MTD_CAP_ROM | |
460 | }, { | |
aa582977 | 461 | .name = "linux kernel(spi)", |
9db144fe MH |
462 | .size = MTDPART_SIZ_FULL, |
463 | .offset = MTDPART_OFS_APPEND, | |
464 | } | |
465 | }; | |
466 | ||
467 | static struct flash_platform_data bfin_spi_flash_data = { | |
468 | .name = "m25p80", | |
469 | .parts = bfin_spi_flash_partitions, | |
470 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
471 | .type = "m25p16", | |
472 | }; | |
473 | ||
474 | /* SPI flash chip (m25p64) */ | |
475 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
476 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
477 | .bits_per_word = 8, | |
478 | }; | |
479 | #endif | |
480 | ||
a261eec0 MF |
481 | #if defined(CONFIG_BFIN_SPI_ADC) \ |
482 | || defined(CONFIG_BFIN_SPI_ADC_MODULE) | |
9db144fe MH |
483 | /* SPI ADC chip */ |
484 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
485 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
486 | .bits_per_word = 16, | |
487 | }; | |
488 | #endif | |
489 | ||
490 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
491 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
492 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
493 | .enable_dma = 0, | |
494 | .bits_per_word = 16, | |
495 | }; | |
496 | #endif | |
497 | ||
f3f704d3 MH |
498 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
499 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |
500 | .enable_dma = 0, | |
9db144fe MH |
501 | .bits_per_word = 8, |
502 | }; | |
503 | #endif | |
504 | ||
9db144fe MH |
505 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
506 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
507 | .enable_dma = 0, | |
508 | .bits_per_word = 16, | |
509 | }; | |
510 | ||
511 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
512 | .model = 7877, | |
513 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
514 | .x_plate_ohms = 419, | |
515 | .y_plate_ohms = 486, | |
516 | .pressure_max = 1000, | |
517 | .pressure_min = 0, | |
518 | .stopacq_polarity = 1, | |
519 | .first_conversion_delay = 3, | |
520 | .acquisition_time = 1, | |
521 | .averaging = 1, | |
522 | .pen_down_acc_interval = 1, | |
523 | }; | |
524 | #endif | |
525 | ||
526 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
527 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
528 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
529 | .enable_dma = 0, | |
530 | .bits_per_word = 16, | |
531 | }; | |
532 | #endif | |
533 | ||
534 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
535 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
536 | .enable_dma = 0, | |
537 | .bits_per_word = 8, | |
538 | }; | |
539 | #endif | |
540 | ||
541 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | |
542 | #if defined(CONFIG_MTD_M25P80) \ | |
543 | || defined(CONFIG_MTD_M25P80_MODULE) | |
544 | { | |
545 | /* the modalias must be the same as spi device driver name */ | |
546 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
547 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
548 | .bus_num = 0, /* Framework bus number */ | |
549 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
550 | .platform_data = &bfin_spi_flash_data, | |
551 | .controller_data = &spi_flash_chip_info, | |
552 | .mode = SPI_MODE_3, | |
553 | }, | |
554 | #endif | |
555 | ||
a261eec0 MF |
556 | #if defined(CONFIG_BFIN_SPI_ADC) \ |
557 | || defined(CONFIG_BFIN_SPI_ADC_MODULE) | |
9db144fe MH |
558 | { |
559 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
560 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
561 | .bus_num = 0, /* Framework bus number */ | |
562 | .chip_select = 1, /* Framework chip select. */ | |
563 | .platform_data = NULL, /* No spi_driver specific config */ | |
564 | .controller_data = &spi_adc_chip_info, | |
565 | }, | |
566 | #endif | |
567 | ||
568 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
569 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
570 | { | |
dac98174 | 571 | .modalias = "ad1836", |
9db144fe MH |
572 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ |
573 | .bus_num = 0, | |
574 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
575 | .controller_data = &ad1836_spi_chip_info, | |
576 | }, | |
577 | #endif | |
f3f704d3 | 578 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
9db144fe | 579 | { |
f3f704d3 MH |
580 | .modalias = "mmc_spi", |
581 | .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ | |
9db144fe | 582 | .bus_num = 0, |
f3f704d3 MH |
583 | .chip_select = 5, |
584 | .controller_data = &mmc_spi_chip_info, | |
9db144fe MH |
585 | .mode = SPI_MODE_3, |
586 | }, | |
587 | #endif | |
9db144fe MH |
588 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
589 | { | |
590 | .modalias = "ad7877", | |
591 | .platform_data = &bfin_ad7877_ts_info, | |
592 | .irq = IRQ_PF8, | |
593 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
594 | .bus_num = 0, | |
595 | .chip_select = 2, | |
596 | .controller_data = &spi_ad7877_chip_info, | |
597 | }, | |
598 | #endif | |
599 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
600 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
601 | { | |
602 | .modalias = "wm8731", | |
603 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
604 | .bus_num = 0, | |
605 | .chip_select = 5, | |
606 | .controller_data = &spi_wm8731_chip_info, | |
607 | .mode = SPI_MODE_0, | |
608 | }, | |
609 | #endif | |
610 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
611 | { | |
612 | .modalias = "spidev", | |
613 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
614 | .bus_num = 0, | |
615 | .chip_select = 1, | |
616 | .controller_data = &spidev_chip_info, | |
617 | }, | |
618 | #endif | |
619 | }; | |
620 | ||
621 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
622 | /* SPI controller data */ | |
623 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
624 | .num_chipselect = 8, | |
625 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
626 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, | |
627 | }; | |
628 | ||
629 | /* SPI (0) */ | |
630 | static struct resource bfin_spi0_resource[] = { | |
631 | [0] = { | |
632 | .start = SPI0_REGBASE, | |
633 | .end = SPI0_REGBASE + 0xFF, | |
634 | .flags = IORESOURCE_MEM, | |
635 | }, | |
636 | [1] = { | |
637 | .start = CH_SPI, | |
638 | .end = CH_SPI, | |
53122693 YL |
639 | .flags = IORESOURCE_DMA, |
640 | }, | |
641 | [2] = { | |
642 | .start = IRQ_SPI, | |
643 | .end = IRQ_SPI, | |
9db144fe MH |
644 | .flags = IORESOURCE_IRQ, |
645 | }, | |
646 | }; | |
647 | ||
648 | static struct platform_device bfin_spi0_device = { | |
649 | .name = "bfin-spi", | |
650 | .id = 0, /* Bus number */ | |
651 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
652 | .resource = bfin_spi0_resource, | |
653 | .dev = { | |
654 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
655 | }, | |
656 | }; | |
657 | #endif /* spi master and devices */ | |
658 | ||
659 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
660 | static struct platform_device bfin_fb_adv7393_device = { | |
661 | .name = "bfin-adv7393", | |
662 | }; | |
663 | #endif | |
664 | ||
665 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
666 | static struct resource bfin_uart_resources[] = { | |
667 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
668 | { | |
669 | .start = 0xFFC00400, | |
670 | .end = 0xFFC004FF, | |
671 | .flags = IORESOURCE_MEM, | |
672 | }, | |
673 | #endif | |
674 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
675 | { | |
676 | .start = 0xFFC02000, | |
677 | .end = 0xFFC020FF, | |
678 | .flags = IORESOURCE_MEM, | |
679 | }, | |
680 | #endif | |
681 | }; | |
682 | ||
683 | static struct platform_device bfin_uart_device = { | |
684 | .name = "bfin-uart", | |
685 | .id = 1, | |
686 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
687 | .resource = bfin_uart_resources, | |
688 | }; | |
689 | #endif | |
690 | ||
691 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
9db144fe | 692 | #ifdef CONFIG_BFIN_SIR0 |
42bd8bcb | 693 | static struct resource bfin_sir0_resources[] = { |
9db144fe MH |
694 | { |
695 | .start = 0xFFC00400, | |
696 | .end = 0xFFC004FF, | |
697 | .flags = IORESOURCE_MEM, | |
698 | }, | |
42bd8bcb GY |
699 | { |
700 | .start = IRQ_UART0_RX, | |
701 | .end = IRQ_UART0_RX+1, | |
702 | .flags = IORESOURCE_IRQ, | |
703 | }, | |
704 | { | |
705 | .start = CH_UART0_RX, | |
706 | .end = CH_UART0_RX+1, | |
707 | .flags = IORESOURCE_DMA, | |
708 | }, | |
709 | }; | |
710 | ||
711 | static struct platform_device bfin_sir0_device = { | |
712 | .name = "bfin_sir", | |
713 | .id = 0, | |
714 | .num_resources = ARRAY_SIZE(bfin_sir0_resources), | |
715 | .resource = bfin_sir0_resources, | |
716 | }; | |
9db144fe MH |
717 | #endif |
718 | #ifdef CONFIG_BFIN_SIR1 | |
42bd8bcb | 719 | static struct resource bfin_sir1_resources[] = { |
9db144fe MH |
720 | { |
721 | .start = 0xFFC02000, | |
722 | .end = 0xFFC020FF, | |
723 | .flags = IORESOURCE_MEM, | |
724 | }, | |
42bd8bcb GY |
725 | { |
726 | .start = IRQ_UART1_RX, | |
727 | .end = IRQ_UART1_RX+1, | |
728 | .flags = IORESOURCE_IRQ, | |
729 | }, | |
730 | { | |
731 | .start = CH_UART1_RX, | |
732 | .end = CH_UART1_RX+1, | |
733 | .flags = IORESOURCE_DMA, | |
734 | }, | |
9db144fe MH |
735 | }; |
736 | ||
42bd8bcb | 737 | static struct platform_device bfin_sir1_device = { |
9db144fe | 738 | .name = "bfin_sir", |
42bd8bcb GY |
739 | .id = 1, |
740 | .num_resources = ARRAY_SIZE(bfin_sir1_resources), | |
741 | .resource = bfin_sir1_resources, | |
9db144fe MH |
742 | }; |
743 | #endif | |
42bd8bcb | 744 | #endif |
9db144fe MH |
745 | |
746 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
747 | static struct resource bfin_twi0_resource[] = { | |
748 | [0] = { | |
749 | .start = TWI0_REGBASE, | |
750 | .end = TWI0_REGBASE, | |
751 | .flags = IORESOURCE_MEM, | |
752 | }, | |
753 | [1] = { | |
754 | .start = IRQ_TWI, | |
755 | .end = IRQ_TWI, | |
756 | .flags = IORESOURCE_IRQ, | |
757 | }, | |
758 | }; | |
759 | ||
760 | static struct platform_device i2c_bfin_twi_device = { | |
761 | .name = "i2c-bfin-twi", | |
762 | .id = 0, | |
763 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
764 | .resource = bfin_twi0_resource, | |
765 | }; | |
766 | #endif | |
767 | ||
9db144fe | 768 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { |
ebd58333 | 769 | #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) |
9db144fe MH |
770 | { |
771 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
9db144fe MH |
772 | }, |
773 | #endif | |
204844eb | 774 | #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) |
9db144fe MH |
775 | { |
776 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
9db144fe MH |
777 | .irq = IRQ_PF8, |
778 | }, | |
779 | #endif | |
780 | }; | |
9db144fe MH |
781 | |
782 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
783 | static struct platform_device bfin_sport0_uart_device = { | |
784 | .name = "bfin-sport-uart", | |
785 | .id = 0, | |
786 | }; | |
787 | ||
788 | static struct platform_device bfin_sport1_uart_device = { | |
789 | .name = "bfin-sport-uart", | |
790 | .id = 1, | |
791 | }; | |
792 | #endif | |
793 | ||
9db144fe MH |
794 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
795 | #include <linux/input.h> | |
796 | #include <linux/gpio_keys.h> | |
797 | ||
798 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
799 | {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"}, | |
800 | }; | |
801 | ||
802 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
803 | .buttons = bfin_gpio_keys_table, | |
804 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
805 | }; | |
806 | ||
807 | static struct platform_device bfin_device_gpiokeys = { | |
808 | .name = "gpio-keys", | |
809 | .dev = { | |
810 | .platform_data = &bfin_gpio_keys_data, | |
811 | }, | |
812 | }; | |
813 | #endif | |
814 | ||
815 | static struct resource bfin_gpios_resources = { | |
816 | .start = 0, | |
817 | .end = MAX_BLACKFIN_GPIOS - 1, | |
818 | .flags = IORESOURCE_IRQ, | |
819 | }; | |
820 | ||
821 | static struct platform_device bfin_gpios_device = { | |
822 | .name = "simple-gpio", | |
823 | .id = -1, | |
824 | .num_resources = 1, | |
825 | .resource = &bfin_gpios_resources, | |
826 | }; | |
827 | ||
828 | static const unsigned int cclk_vlev_datasheet[] = | |
829 | { | |
830 | VRPAIR(VLEV_100, 400000000), | |
831 | VRPAIR(VLEV_105, 426000000), | |
832 | VRPAIR(VLEV_110, 500000000), | |
833 | VRPAIR(VLEV_115, 533000000), | |
834 | VRPAIR(VLEV_120, 600000000), | |
835 | }; | |
836 | ||
837 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
838 | .tuple_tab = cclk_vlev_datasheet, | |
839 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
840 | .vr_settling_time = 25 /* us */, | |
841 | }; | |
842 | ||
843 | static struct platform_device bfin_dpmc = { | |
844 | .name = "bfin dpmc", | |
845 | .dev = { | |
846 | .platform_data = &bfin_dmpc_vreg_data, | |
847 | }, | |
848 | }; | |
849 | ||
850 | static struct platform_device *stamp_devices[] __initdata = { | |
851 | ||
852 | &bfin_dpmc, | |
853 | ||
854 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
855 | &bf5xx_nand_device, | |
856 | #endif | |
857 | ||
858 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
859 | &bfin_pcmcia_cf_device, | |
860 | #endif | |
861 | ||
862 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
863 | &rtc_device, | |
864 | #endif | |
865 | ||
866 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
867 | &sl811_hcd_device, | |
868 | #endif | |
869 | ||
870 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
871 | &isp1362_hcd_device, | |
872 | #endif | |
873 | ||
3f375690 MH |
874 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
875 | &bfin_isp1760_device, | |
876 | #endif | |
877 | ||
9db144fe MH |
878 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
879 | &musb_device, | |
880 | #endif | |
881 | ||
882 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
883 | &smc91x_device, | |
884 | #endif | |
885 | ||
886 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
887 | &dm9000_device, | |
888 | #endif | |
889 | ||
890 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
65319628 | 891 | &bfin_mii_bus, |
9db144fe MH |
892 | &bfin_mac_device, |
893 | #endif | |
894 | ||
895 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
896 | &net2272_bfin_device, | |
897 | #endif | |
898 | ||
899 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
900 | &bfin_spi0_device, | |
901 | #endif | |
902 | ||
903 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
904 | &bfin_fb_adv7393_device, | |
905 | #endif | |
906 | ||
907 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
908 | &bfin_uart_device, | |
909 | #endif | |
910 | ||
911 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
42bd8bcb GY |
912 | #ifdef CONFIG_BFIN_SIR0 |
913 | &bfin_sir0_device, | |
914 | #endif | |
915 | #ifdef CONFIG_BFIN_SIR1 | |
916 | &bfin_sir1_device, | |
917 | #endif | |
9db144fe MH |
918 | #endif |
919 | ||
920 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
921 | &i2c_bfin_twi_device, | |
922 | #endif | |
923 | ||
924 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
925 | &bfin_sport0_uart_device, | |
926 | &bfin_sport1_uart_device, | |
927 | #endif | |
928 | ||
9db144fe MH |
929 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
930 | &bfin_device_gpiokeys, | |
931 | #endif | |
932 | ||
933 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
934 | &ezkit_flash_device, | |
935 | #endif | |
936 | ||
937 | &bfin_gpios_device, | |
938 | }; | |
939 | ||
7f6678c5 | 940 | static int __init cm_init(void) |
9db144fe MH |
941 | { |
942 | printk(KERN_INFO "%s(): registering device resources\n", __func__); | |
9db144fe MH |
943 | i2c_register_board_info(0, bfin_i2c_board_info, |
944 | ARRAY_SIZE(bfin_i2c_board_info)); | |
9db144fe MH |
945 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); |
946 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); | |
9db144fe MH |
947 | return 0; |
948 | } | |
949 | ||
7f6678c5 | 950 | arch_initcall(cm_init); |
9db144fe MH |
951 | |
952 | void native_machine_restart(char *cmd) | |
953 | { | |
954 | /* workaround reboot hang when booting from SPI */ | |
955 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
b52dae31 | 956 | bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); |
9db144fe MH |
957 | } |
958 | ||
959 | void bfin_get_ether_addr(char *addr) | |
960 | { | |
961 | random_ether_addr(addr); | |
962 | printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); | |
963 | } | |
964 | EXPORT_SYMBOL(bfin_get_ether_addr); |