Commit | Line | Data |
---|---|---|
8cc7117e MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/ezbrd.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2008 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/mtd/physmap.h> | |
36 | #include <linux/spi/spi.h> | |
37 | #include <linux/spi/flash.h> | |
38 | ||
39 | #include <linux/i2c.h> | |
40 | #include <linux/irq.h> | |
41 | #include <linux/interrupt.h> | |
42 | #include <linux/usb/musb.h> | |
43 | #include <asm/dma.h> | |
44 | #include <asm/bfin5xx_spi.h> | |
45 | #include <asm/reboot.h> | |
46 | #include <asm/nand.h> | |
47 | #include <asm/portmux.h> | |
48 | #include <asm/dpmc.h> | |
49 | #include <linux/spi/ad7877.h> | |
50 | ||
51 | /* | |
52 | * Name the Board for the /proc/cpuinfo | |
53 | */ | |
fe85cad2 | 54 | const char bfin_board_name[] = "ADI BF526-EZBRD"; |
8cc7117e MH |
55 | |
56 | /* | |
57 | * Driver needs to know address, irq and flag pin. | |
58 | */ | |
59 | ||
60 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
61 | static struct resource musb_resources[] = { | |
62 | [0] = { | |
63 | .start = 0xffc03800, | |
64 | .end = 0xffc03cff, | |
65 | .flags = IORESOURCE_MEM, | |
66 | }, | |
67 | [1] = { /* general IRQ */ | |
68 | .start = IRQ_USB_INT0, | |
69 | .end = IRQ_USB_INT0, | |
70 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
71 | }, | |
72 | [2] = { /* DMA IRQ */ | |
73 | .start = IRQ_USB_DMA, | |
74 | .end = IRQ_USB_DMA, | |
75 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
76 | }, | |
77 | }; | |
78 | ||
79 | static struct musb_hdrc_config musb_config = { | |
80 | .multipoint = 0, | |
81 | .dyn_fifo = 0, | |
82 | .soft_con = 1, | |
83 | .dma = 1, | |
84 | .num_eps = 7, | |
85 | .dma_channels = 7, | |
86 | .gpio_vrsel = GPIO_PG13, | |
87 | }; | |
88 | ||
89 | static struct musb_hdrc_platform_data musb_plat = { | |
90 | #if defined(CONFIG_USB_MUSB_OTG) | |
91 | .mode = MUSB_OTG, | |
92 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
93 | .mode = MUSB_HOST, | |
94 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
95 | .mode = MUSB_PERIPHERAL, | |
96 | #endif | |
97 | .config = &musb_config, | |
98 | }; | |
99 | ||
100 | static u64 musb_dmamask = ~(u32)0; | |
101 | ||
102 | static struct platform_device musb_device = { | |
103 | .name = "musb_hdrc", | |
104 | .id = 0, | |
105 | .dev = { | |
106 | .dma_mask = &musb_dmamask, | |
107 | .coherent_dma_mask = 0xffffffff, | |
108 | .platform_data = &musb_plat, | |
109 | }, | |
110 | .num_resources = ARRAY_SIZE(musb_resources), | |
111 | .resource = musb_resources, | |
112 | }; | |
113 | #endif | |
114 | ||
115 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
116 | static struct mtd_partition ezbrd_partitions[] = { | |
117 | { | |
118 | .name = "bootloader(nor)", | |
119 | .size = 0x40000, | |
120 | .offset = 0, | |
121 | }, { | |
122 | .name = "linux kernel(nor)", | |
123 | .size = 0x1C0000, | |
124 | .offset = MTDPART_OFS_APPEND, | |
125 | }, { | |
126 | .name = "file system(nor)", | |
127 | .size = MTDPART_SIZ_FULL, | |
128 | .offset = MTDPART_OFS_APPEND, | |
129 | } | |
130 | }; | |
131 | ||
132 | static struct physmap_flash_data ezbrd_flash_data = { | |
133 | .width = 2, | |
134 | .parts = ezbrd_partitions, | |
135 | .nr_parts = ARRAY_SIZE(ezbrd_partitions), | |
136 | }; | |
137 | ||
138 | static struct resource ezbrd_flash_resource = { | |
139 | .start = 0x20000000, | |
140 | .end = 0x203fffff, | |
141 | .flags = IORESOURCE_MEM, | |
142 | }; | |
143 | ||
144 | static struct platform_device ezbrd_flash_device = { | |
145 | .name = "physmap-flash", | |
146 | .id = 0, | |
147 | .dev = { | |
148 | .platform_data = &ezbrd_flash_data, | |
149 | }, | |
150 | .num_resources = 1, | |
151 | .resource = &ezbrd_flash_resource, | |
152 | }; | |
153 | #endif | |
154 | ||
155 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
156 | static struct mtd_partition partition_info[] = { | |
157 | { | |
158 | .name = "linux kernel(nand)", | |
159 | .offset = 0, | |
160 | .size = 4 * 1024 * 1024, | |
161 | }, | |
162 | { | |
163 | .name = "file system(nand)", | |
164 | .offset = MTDPART_OFS_APPEND, | |
165 | .size = MTDPART_SIZ_FULL, | |
166 | }, | |
167 | }; | |
168 | ||
169 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
170 | .page_size = NFC_PG_SIZE_256, | |
171 | .data_width = NFC_NWIDTH_8, | |
172 | .partitions = partition_info, | |
173 | .nr_partitions = ARRAY_SIZE(partition_info), | |
174 | .rd_dly = 3, | |
175 | .wr_dly = 3, | |
176 | }; | |
177 | ||
178 | static struct resource bf5xx_nand_resources[] = { | |
179 | { | |
180 | .start = NFC_CTL, | |
181 | .end = NFC_DATA_RD + 2, | |
182 | .flags = IORESOURCE_MEM, | |
183 | }, | |
184 | { | |
185 | .start = CH_NFC, | |
186 | .end = CH_NFC, | |
187 | .flags = IORESOURCE_IRQ, | |
188 | }, | |
189 | }; | |
190 | ||
191 | static struct platform_device bf5xx_nand_device = { | |
192 | .name = "bf5xx-nand", | |
193 | .id = 0, | |
194 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
195 | .resource = bf5xx_nand_resources, | |
196 | .dev = { | |
197 | .platform_data = &bf5xx_nand_platform, | |
198 | }, | |
199 | }; | |
200 | #endif | |
201 | ||
202 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
203 | static struct platform_device rtc_device = { | |
204 | .name = "rtc-bfin", | |
205 | .id = -1, | |
206 | }; | |
207 | #endif | |
208 | ||
209 | ||
210 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
211 | static struct platform_device bfin_mac_device = { | |
212 | .name = "bfin_mac", | |
213 | }; | |
214 | #endif | |
215 | ||
216 | #if defined(CONFIG_MTD_M25P80) \ | |
217 | || defined(CONFIG_MTD_M25P80_MODULE) | |
218 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
219 | { | |
220 | .name = "bootloader(spi)", | |
221 | .size = 0x00040000, | |
222 | .offset = 0, | |
223 | .mask_flags = MTD_CAP_ROM | |
224 | }, { | |
225 | .name = "linux kernel(spi)", | |
226 | .size = MTDPART_SIZ_FULL, | |
227 | .offset = MTDPART_OFS_APPEND, | |
228 | } | |
229 | }; | |
230 | ||
231 | static struct flash_platform_data bfin_spi_flash_data = { | |
232 | .name = "m25p80", | |
233 | .parts = bfin_spi_flash_partitions, | |
234 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
235 | .type = "m25p16", | |
236 | }; | |
237 | ||
238 | /* SPI flash chip (m25p64) */ | |
239 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
240 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
241 | .bits_per_word = 8, | |
242 | }; | |
243 | #endif | |
244 | ||
245 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
246 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
247 | /* SPI ADC chip */ | |
248 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
249 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
250 | .bits_per_word = 16, | |
251 | }; | |
252 | #endif | |
253 | ||
254 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
255 | static struct bfin5xx_spi_chip spi_mmc_chip_info = { | |
256 | .enable_dma = 1, | |
257 | .bits_per_word = 8, | |
258 | }; | |
259 | #endif | |
260 | ||
261 | #if defined(CONFIG_PBX) | |
262 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
263 | .ctl_reg = 0x4, /* send zero */ | |
264 | .enable_dma = 0, | |
265 | .bits_per_word = 8, | |
266 | .cs_change_per_word = 1, | |
267 | }; | |
268 | #endif | |
269 | ||
270 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
271 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
272 | .enable_dma = 0, | |
273 | .bits_per_word = 16, | |
274 | }; | |
275 | ||
276 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
277 | .model = 7877, | |
278 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
279 | .x_plate_ohms = 419, | |
280 | .y_plate_ohms = 486, | |
281 | .pressure_max = 1000, | |
282 | .pressure_min = 0, | |
283 | .stopacq_polarity = 1, | |
284 | .first_conversion_delay = 3, | |
285 | .acquisition_time = 1, | |
286 | .averaging = 1, | |
287 | .pen_down_acc_interval = 1, | |
288 | }; | |
289 | #endif | |
290 | ||
291 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
292 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
293 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
294 | .enable_dma = 0, | |
295 | .bits_per_word = 16, | |
296 | }; | |
297 | #endif | |
298 | ||
299 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
300 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
301 | .enable_dma = 0, | |
302 | .bits_per_word = 8, | |
303 | }; | |
304 | #endif | |
305 | ||
306 | #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) | |
307 | static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { | |
308 | .enable_dma = 0, | |
309 | .bits_per_word = 8, | |
310 | }; | |
311 | #endif | |
312 | ||
313 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | |
314 | #if defined(CONFIG_MTD_M25P80) \ | |
315 | || defined(CONFIG_MTD_M25P80_MODULE) | |
316 | { | |
317 | /* the modalias must be the same as spi device driver name */ | |
318 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
319 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
320 | .bus_num = 0, /* Framework bus number */ | |
321 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
322 | .platform_data = &bfin_spi_flash_data, | |
323 | .controller_data = &spi_flash_chip_info, | |
324 | .mode = SPI_MODE_3, | |
325 | }, | |
326 | #endif | |
327 | ||
328 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
329 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
330 | { | |
331 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
332 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
333 | .bus_num = 0, /* Framework bus number */ | |
334 | .chip_select = 1, /* Framework chip select. */ | |
335 | .platform_data = NULL, /* No spi_driver specific config */ | |
336 | .controller_data = &spi_adc_chip_info, | |
337 | }, | |
338 | #endif | |
339 | ||
340 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
341 | { | |
342 | .modalias = "spi_mmc_dummy", | |
343 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
344 | .bus_num = 0, | |
345 | .chip_select = 0, | |
346 | .platform_data = NULL, | |
347 | .controller_data = &spi_mmc_chip_info, | |
348 | .mode = SPI_MODE_3, | |
349 | }, | |
350 | { | |
351 | .modalias = "spi_mmc", | |
352 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
353 | .bus_num = 0, | |
354 | .chip_select = CONFIG_SPI_MMC_CS_CHAN, | |
355 | .platform_data = NULL, | |
356 | .controller_data = &spi_mmc_chip_info, | |
357 | .mode = SPI_MODE_3, | |
358 | }, | |
359 | #endif | |
360 | #if defined(CONFIG_PBX) | |
361 | { | |
362 | .modalias = "fxs-spi", | |
363 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
364 | .bus_num = 0, | |
365 | .chip_select = 8 - CONFIG_J11_JUMPER, | |
366 | .controller_data = &spi_si3xxx_chip_info, | |
367 | .mode = SPI_MODE_3, | |
368 | }, | |
369 | { | |
370 | .modalias = "fxo-spi", | |
371 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
372 | .bus_num = 0, | |
373 | .chip_select = 8 - CONFIG_J19_JUMPER, | |
374 | .controller_data = &spi_si3xxx_chip_info, | |
375 | .mode = SPI_MODE_3, | |
376 | }, | |
377 | #endif | |
378 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
379 | { | |
380 | .modalias = "ad7877", | |
381 | .platform_data = &bfin_ad7877_ts_info, | |
382 | .irq = IRQ_PF8, | |
383 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
384 | .bus_num = 0, | |
385 | .chip_select = 2, | |
386 | .controller_data = &spi_ad7877_chip_info, | |
387 | }, | |
388 | #endif | |
389 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
390 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
391 | { | |
392 | .modalias = "wm8731", | |
393 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
394 | .bus_num = 0, | |
395 | .chip_select = 5, | |
396 | .controller_data = &spi_wm8731_chip_info, | |
397 | .mode = SPI_MODE_0, | |
398 | }, | |
399 | #endif | |
400 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
401 | { | |
402 | .modalias = "spidev", | |
403 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
404 | .bus_num = 0, | |
405 | .chip_select = 1, | |
406 | .controller_data = &spidev_chip_info, | |
407 | }, | |
408 | #endif | |
409 | #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) | |
410 | { | |
411 | .modalias = "bfin-lq035q1-spi", | |
412 | .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ | |
413 | .bus_num = 0, | |
414 | .chip_select = 1, | |
415 | .controller_data = &lq035q1_spi_chip_info, | |
416 | .mode = SPI_CPHA | SPI_CPOL, | |
417 | }, | |
418 | #endif | |
419 | }; | |
420 | ||
421 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
422 | /* SPI controller data */ | |
423 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
424 | .num_chipselect = 8, | |
425 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
426 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, | |
427 | }; | |
428 | ||
429 | /* SPI (0) */ | |
430 | static struct resource bfin_spi0_resource[] = { | |
431 | [0] = { | |
432 | .start = SPI0_REGBASE, | |
433 | .end = SPI0_REGBASE + 0xFF, | |
434 | .flags = IORESOURCE_MEM, | |
435 | }, | |
436 | [1] = { | |
437 | .start = CH_SPI, | |
438 | .end = CH_SPI, | |
439 | .flags = IORESOURCE_IRQ, | |
440 | }, | |
441 | }; | |
442 | ||
443 | static struct platform_device bfin_spi0_device = { | |
444 | .name = "bfin-spi", | |
445 | .id = 0, /* Bus number */ | |
446 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
447 | .resource = bfin_spi0_resource, | |
448 | .dev = { | |
449 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
450 | }, | |
451 | }; | |
452 | #endif /* spi master and devices */ | |
453 | ||
454 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
455 | static struct resource bfin_uart_resources[] = { | |
456 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
457 | { | |
458 | .start = 0xFFC00400, | |
459 | .end = 0xFFC004FF, | |
460 | .flags = IORESOURCE_MEM, | |
461 | }, | |
462 | #endif | |
463 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
464 | { | |
465 | .start = 0xFFC02000, | |
466 | .end = 0xFFC020FF, | |
467 | .flags = IORESOURCE_MEM, | |
468 | }, | |
469 | #endif | |
470 | }; | |
471 | ||
472 | static struct platform_device bfin_uart_device = { | |
473 | .name = "bfin-uart", | |
474 | .id = 1, | |
475 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
476 | .resource = bfin_uart_resources, | |
477 | }; | |
478 | #endif | |
479 | ||
480 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
481 | static struct resource bfin_sir_resources[] = { | |
482 | #ifdef CONFIG_BFIN_SIR0 | |
483 | { | |
484 | .start = 0xFFC00400, | |
485 | .end = 0xFFC004FF, | |
486 | .flags = IORESOURCE_MEM, | |
487 | }, | |
488 | #endif | |
489 | #ifdef CONFIG_BFIN_SIR1 | |
490 | { | |
491 | .start = 0xFFC02000, | |
492 | .end = 0xFFC020FF, | |
493 | .flags = IORESOURCE_MEM, | |
494 | }, | |
495 | #endif | |
496 | }; | |
497 | ||
498 | static struct platform_device bfin_sir_device = { | |
499 | .name = "bfin_sir", | |
500 | .id = 0, | |
501 | .num_resources = ARRAY_SIZE(bfin_sir_resources), | |
502 | .resource = bfin_sir_resources, | |
503 | }; | |
504 | #endif | |
505 | ||
506 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
507 | static struct resource bfin_twi0_resource[] = { | |
508 | [0] = { | |
509 | .start = TWI0_REGBASE, | |
510 | .end = TWI0_REGBASE, | |
511 | .flags = IORESOURCE_MEM, | |
512 | }, | |
513 | [1] = { | |
514 | .start = IRQ_TWI, | |
515 | .end = IRQ_TWI, | |
516 | .flags = IORESOURCE_IRQ, | |
517 | }, | |
518 | }; | |
519 | ||
520 | static struct platform_device i2c_bfin_twi_device = { | |
521 | .name = "i2c-bfin-twi", | |
522 | .id = 0, | |
523 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
524 | .resource = bfin_twi0_resource, | |
525 | }; | |
526 | #endif | |
527 | ||
528 | #ifdef CONFIG_I2C_BOARDINFO | |
529 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { | |
530 | #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) | |
531 | { | |
532 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
533 | }, | |
534 | #endif | |
535 | #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) | |
536 | { | |
537 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
538 | .irq = IRQ_PF8, | |
539 | }, | |
540 | #endif | |
541 | }; | |
542 | #endif | |
543 | ||
544 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
545 | static struct platform_device bfin_sport0_uart_device = { | |
546 | .name = "bfin-sport-uart", | |
547 | .id = 0, | |
548 | }; | |
549 | ||
550 | static struct platform_device bfin_sport1_uart_device = { | |
551 | .name = "bfin-sport-uart", | |
552 | .id = 1, | |
553 | }; | |
554 | #endif | |
555 | ||
556 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
557 | #include <linux/input.h> | |
558 | #include <linux/gpio_keys.h> | |
559 | ||
560 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
561 | {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, | |
562 | {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, | |
563 | }; | |
564 | ||
565 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
566 | .buttons = bfin_gpio_keys_table, | |
567 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
568 | }; | |
569 | ||
570 | static struct platform_device bfin_device_gpiokeys = { | |
571 | .name = "gpio-keys", | |
572 | .dev = { | |
573 | .platform_data = &bfin_gpio_keys_data, | |
574 | }, | |
575 | }; | |
576 | #endif | |
577 | ||
578 | static struct resource bfin_gpios_resources = { | |
579 | .start = 0, | |
580 | .end = MAX_BLACKFIN_GPIOS - 1, | |
581 | .flags = IORESOURCE_IRQ, | |
582 | }; | |
583 | ||
584 | static struct platform_device bfin_gpios_device = { | |
585 | .name = "simple-gpio", | |
586 | .id = -1, | |
587 | .num_resources = 1, | |
588 | .resource = &bfin_gpios_resources, | |
589 | }; | |
590 | ||
591 | static const unsigned int cclk_vlev_datasheet[] = | |
592 | { | |
593 | VRPAIR(VLEV_100, 400000000), | |
594 | VRPAIR(VLEV_105, 426000000), | |
595 | VRPAIR(VLEV_110, 500000000), | |
596 | VRPAIR(VLEV_115, 533000000), | |
597 | VRPAIR(VLEV_120, 600000000), | |
598 | }; | |
599 | ||
600 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
601 | .tuple_tab = cclk_vlev_datasheet, | |
602 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
603 | .vr_settling_time = 25 /* us */, | |
604 | }; | |
605 | ||
606 | static struct platform_device bfin_dpmc = { | |
607 | .name = "bfin dpmc", | |
608 | .dev = { | |
609 | .platform_data = &bfin_dmpc_vreg_data, | |
610 | }, | |
611 | }; | |
612 | ||
613 | #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) | |
614 | #include <asm/bfin-lq035q1.h> | |
615 | ||
616 | static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { | |
617 | .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, | |
618 | .use_bl = 1, | |
619 | .gpio_bl = GPIO_PG12, | |
620 | }; | |
621 | ||
622 | static struct resource bfin_lq035q1_resources[] = { | |
623 | { | |
624 | .start = IRQ_PPI_ERROR, | |
625 | .end = IRQ_PPI_ERROR, | |
626 | .flags = IORESOURCE_IRQ, | |
627 | }, | |
628 | }; | |
629 | ||
630 | static struct platform_device bfin_lq035q1_device = { | |
631 | .name = "bfin-lq035q1", | |
632 | .id = -1, | |
633 | .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), | |
634 | .resource = bfin_lq035q1_resources, | |
635 | .dev = { | |
636 | .platform_data = &bfin_lq035q1_data, | |
637 | }, | |
638 | }; | |
639 | #endif | |
640 | ||
641 | static struct platform_device *stamp_devices[] __initdata = { | |
642 | ||
643 | &bfin_dpmc, | |
644 | ||
645 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
646 | &bf5xx_nand_device, | |
647 | #endif | |
648 | ||
649 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
650 | &rtc_device, | |
651 | #endif | |
652 | ||
653 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
654 | &musb_device, | |
655 | #endif | |
656 | ||
657 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
658 | &bfin_mac_device, | |
659 | #endif | |
660 | ||
661 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
662 | &bfin_spi0_device, | |
663 | #endif | |
664 | ||
665 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
666 | &bfin_uart_device, | |
667 | #endif | |
668 | ||
669 | #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) | |
670 | &bfin_lq035q1_device, | |
671 | #endif | |
672 | ||
673 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
674 | &bfin_sir_device, | |
675 | #endif | |
676 | ||
677 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
678 | &i2c_bfin_twi_device, | |
679 | #endif | |
680 | ||
681 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
682 | &bfin_sport0_uart_device, | |
683 | &bfin_sport1_uart_device, | |
684 | #endif | |
685 | ||
686 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
687 | &bfin_device_gpiokeys, | |
688 | #endif | |
689 | ||
690 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
691 | &ezbrd_flash_device, | |
692 | #endif | |
693 | ||
694 | &bfin_gpios_device, | |
695 | }; | |
696 | ||
697 | static int __init stamp_init(void) | |
698 | { | |
699 | printk(KERN_INFO "%s(): registering device resources\n", __func__); | |
700 | ||
701 | #ifdef CONFIG_I2C_BOARDINFO | |
702 | i2c_register_board_info(0, bfin_i2c_board_info, | |
703 | ARRAY_SIZE(bfin_i2c_board_info)); | |
704 | #endif | |
705 | ||
706 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); | |
707 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); | |
708 | return 0; | |
709 | } | |
710 | ||
711 | arch_initcall(stamp_init); | |
712 | ||
713 | void native_machine_restart(char *cmd) | |
714 | { | |
715 | /* workaround reboot hang when booting from SPI */ | |
716 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
717 | bfin_gpio_reset_spi0_ssel1(); | |
718 | } | |
719 | ||
720 | void bfin_get_ether_addr(char *addr) | |
721 | { | |
722 | /* the MAC is stored in OTP memory page 0xDF */ | |
723 | u32 ret; | |
724 | u64 otp_mac; | |
725 | u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; | |
726 | ||
727 | ret = otp_read(0xDF, 0x00, &otp_mac); | |
728 | if (!(ret & 0x1)) { | |
729 | char *otp_mac_p = (char *)&otp_mac; | |
730 | for (ret = 0; ret < 6; ++ret) | |
731 | addr[ret] = otp_mac_p[5 - ret]; | |
732 | } | |
733 | } | |
734 | EXPORT_SYMBOL(bfin_get_ether_addr); |