Commit | Line | Data |
---|---|---|
59003145 MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/ezkit.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
a628a8bc | 11 | * Copyright 2004-2008 Analog Devices Inc. |
59003145 MH |
12 | * |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
d7e5dd41 | 35 | #include <linux/mtd/physmap.h> |
59003145 MH |
36 | #include <linux/spi/spi.h> |
37 | #include <linux/spi/flash.h> | |
38 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
f02bcec5 | 39 | #include <linux/usb/isp1362.h> |
59003145 | 40 | #endif |
72268689 | 41 | #include <linux/i2c.h> |
59003145 MH |
42 | #include <linux/irq.h> |
43 | #include <linux/interrupt.h> | |
632f658b | 44 | #include <linux/usb/sl811.h> |
1089e228 | 45 | #include <linux/usb/musb.h> |
64307f7d | 46 | #include <asm/cplb.h> |
59003145 MH |
47 | #include <asm/dma.h> |
48 | #include <asm/bfin5xx_spi.h> | |
49 | #include <asm/reboot.h> | |
64307f7d | 50 | #include <asm/nand.h> |
5d448dd5 | 51 | #include <asm/portmux.h> |
14b03204 | 52 | #include <asm/dpmc.h> |
59003145 MH |
53 | #include <linux/spi/ad7877.h> |
54 | ||
55 | /* | |
56 | * Name the Board for the /proc/cpuinfo | |
57 | */ | |
066954a3 | 58 | const char bfin_board_name[] = "ADDS-BF527-EZKIT"; |
59003145 MH |
59 | |
60 | /* | |
61 | * Driver needs to know address, irq and flag pin. | |
62 | */ | |
63 | ||
64 | #define ISP1761_BASE 0x203C0000 | |
65 | #define ISP1761_IRQ IRQ_PF7 | |
66 | ||
67 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) | |
68 | static struct resource bfin_isp1761_resources[] = { | |
69 | [0] = { | |
70 | .name = "isp1761-regs", | |
71 | .start = ISP1761_BASE + 0x00000000, | |
72 | .end = ISP1761_BASE + 0x000fffff, | |
73 | .flags = IORESOURCE_MEM, | |
74 | }, | |
75 | [1] = { | |
76 | .start = ISP1761_IRQ, | |
77 | .end = ISP1761_IRQ, | |
78 | .flags = IORESOURCE_IRQ, | |
79 | }, | |
80 | }; | |
81 | ||
82 | static struct platform_device bfin_isp1761_device = { | |
83 | .name = "isp1761", | |
84 | .id = 0, | |
85 | .num_resources = ARRAY_SIZE(bfin_isp1761_resources), | |
86 | .resource = bfin_isp1761_resources, | |
87 | }; | |
88 | ||
89 | static struct platform_device *bfin_isp1761_devices[] = { | |
90 | &bfin_isp1761_device, | |
91 | }; | |
92 | ||
93 | int __init bfin_isp1761_init(void) | |
94 | { | |
95 | unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); | |
96 | ||
b85d858b | 97 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
59003145 MH |
98 | set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); |
99 | ||
100 | return platform_add_devices(bfin_isp1761_devices, num_devices); | |
101 | } | |
102 | ||
103 | void __exit bfin_isp1761_exit(void) | |
104 | { | |
105 | platform_device_unregister(&bfin_isp1761_device); | |
106 | } | |
107 | ||
108 | arch_initcall(bfin_isp1761_init); | |
109 | #endif | |
110 | ||
1089e228 MH |
111 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
112 | static struct resource musb_resources[] = { | |
113 | [0] = { | |
114 | .start = 0xffc03800, | |
115 | .end = 0xffc03cff, | |
116 | .flags = IORESOURCE_MEM, | |
117 | }, | |
118 | [1] = { /* general IRQ */ | |
119 | .start = IRQ_USB_INT0, | |
120 | .end = IRQ_USB_INT0, | |
121 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
122 | }, | |
123 | [2] = { /* DMA IRQ */ | |
124 | .start = IRQ_USB_DMA, | |
125 | .end = IRQ_USB_DMA, | |
126 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
127 | }, | |
128 | }; | |
129 | ||
50041acb BW |
130 | static struct musb_hdrc_config musb_config = { |
131 | .multipoint = 0, | |
132 | .dyn_fifo = 0, | |
133 | .soft_con = 1, | |
134 | .dma = 1, | |
135 | .num_eps = 7, | |
136 | .dma_channels = 7, | |
137 | .gpio_vrsel = GPIO_PG13, | |
138 | }; | |
139 | ||
1089e228 MH |
140 | static struct musb_hdrc_platform_data musb_plat = { |
141 | #if defined(CONFIG_USB_MUSB_OTG) | |
142 | .mode = MUSB_OTG, | |
143 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
144 | .mode = MUSB_HOST, | |
145 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
146 | .mode = MUSB_PERIPHERAL, | |
147 | #endif | |
50041acb | 148 | .config = &musb_config, |
1089e228 MH |
149 | }; |
150 | ||
151 | static u64 musb_dmamask = ~(u32)0; | |
152 | ||
153 | static struct platform_device musb_device = { | |
154 | .name = "musb_hdrc", | |
155 | .id = 0, | |
156 | .dev = { | |
157 | .dma_mask = &musb_dmamask, | |
158 | .coherent_dma_mask = 0xffffffff, | |
159 | .platform_data = &musb_plat, | |
160 | }, | |
161 | .num_resources = ARRAY_SIZE(musb_resources), | |
162 | .resource = musb_resources, | |
163 | }; | |
164 | #endif | |
165 | ||
166 | #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) | |
167 | ||
168 | static struct resource bf52x_t350mcqb_resources[] = { | |
169 | { | |
170 | .start = IRQ_PPI_ERROR, | |
171 | .end = IRQ_PPI_ERROR, | |
172 | .flags = IORESOURCE_IRQ, | |
173 | }, | |
174 | }; | |
175 | ||
176 | static struct platform_device bf52x_t350mcqb_device = { | |
177 | .name = "bfin-t350mcqb", | |
178 | .id = -1, | |
179 | .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources), | |
180 | .resource = bf52x_t350mcqb_resources, | |
181 | }; | |
182 | #endif | |
183 | ||
d7e5dd41 MH |
184 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
185 | static struct mtd_partition ezkit_partitions[] = { | |
186 | { | |
aa582977 | 187 | .name = "bootloader(nor)", |
d7e5dd41 MH |
188 | .size = 0x40000, |
189 | .offset = 0, | |
190 | }, { | |
aa582977 | 191 | .name = "linux kernel(nor)", |
d7e5dd41 MH |
192 | .size = 0x1C0000, |
193 | .offset = MTDPART_OFS_APPEND, | |
194 | }, { | |
aa582977 | 195 | .name = "file system(nor)", |
d7e5dd41 MH |
196 | .size = MTDPART_SIZ_FULL, |
197 | .offset = MTDPART_OFS_APPEND, | |
198 | } | |
199 | }; | |
200 | ||
201 | static struct physmap_flash_data ezkit_flash_data = { | |
202 | .width = 2, | |
203 | .parts = ezkit_partitions, | |
204 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
205 | }; | |
206 | ||
207 | static struct resource ezkit_flash_resource = { | |
208 | .start = 0x20000000, | |
209 | .end = 0x203fffff, | |
210 | .flags = IORESOURCE_MEM, | |
211 | }; | |
212 | ||
213 | static struct platform_device ezkit_flash_device = { | |
214 | .name = "physmap-flash", | |
215 | .id = 0, | |
216 | .dev = { | |
217 | .platform_data = &ezkit_flash_data, | |
218 | }, | |
219 | .num_resources = 1, | |
220 | .resource = &ezkit_flash_resource, | |
221 | }; | |
222 | #endif | |
223 | ||
64307f7d MH |
224 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) |
225 | static struct mtd_partition partition_info[] = { | |
226 | { | |
aa582977 | 227 | .name = "linux kernel(nand)", |
64307f7d MH |
228 | .offset = 0, |
229 | .size = 4 * SIZE_1M, | |
230 | }, | |
231 | { | |
aa582977 | 232 | .name = "file system(nand)", |
edf05641 MF |
233 | .offset = MTDPART_OFS_APPEND, |
234 | .size = MTDPART_SIZ_FULL, | |
64307f7d MH |
235 | }, |
236 | }; | |
237 | ||
238 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
239 | .page_size = NFC_PG_SIZE_256, | |
240 | .data_width = NFC_NWIDTH_8, | |
241 | .partitions = partition_info, | |
242 | .nr_partitions = ARRAY_SIZE(partition_info), | |
243 | .rd_dly = 3, | |
244 | .wr_dly = 3, | |
245 | }; | |
246 | ||
247 | static struct resource bf5xx_nand_resources[] = { | |
248 | { | |
249 | .start = NFC_CTL, | |
250 | .end = NFC_DATA_RD + 2, | |
251 | .flags = IORESOURCE_MEM, | |
252 | }, | |
253 | { | |
254 | .start = CH_NFC, | |
255 | .end = CH_NFC, | |
256 | .flags = IORESOURCE_IRQ, | |
257 | }, | |
258 | }; | |
259 | ||
260 | static struct platform_device bf5xx_nand_device = { | |
261 | .name = "bf5xx-nand", | |
262 | .id = 0, | |
263 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
264 | .resource = bf5xx_nand_resources, | |
265 | .dev = { | |
266 | .platform_data = &bf5xx_nand_platform, | |
267 | }, | |
268 | }; | |
269 | #endif | |
270 | ||
59003145 MH |
271 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) |
272 | static struct resource bfin_pcmcia_cf_resources[] = { | |
273 | { | |
274 | .start = 0x20310000, /* IO PORT */ | |
275 | .end = 0x20312000, | |
276 | .flags = IORESOURCE_MEM, | |
277 | }, { | |
278 | .start = 0x20311000, /* Attribute Memory */ | |
279 | .end = 0x20311FFF, | |
280 | .flags = IORESOURCE_MEM, | |
281 | }, { | |
282 | .start = IRQ_PF4, | |
283 | .end = IRQ_PF4, | |
284 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
285 | }, { | |
286 | .start = 6, /* Card Detect PF6 */ | |
287 | .end = 6, | |
288 | .flags = IORESOURCE_IRQ, | |
289 | }, | |
290 | }; | |
291 | ||
292 | static struct platform_device bfin_pcmcia_cf_device = { | |
293 | .name = "bfin_cf_pcmcia", | |
294 | .id = -1, | |
295 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
296 | .resource = bfin_pcmcia_cf_resources, | |
297 | }; | |
298 | #endif | |
299 | ||
300 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
301 | static struct platform_device rtc_device = { | |
302 | .name = "rtc-bfin", | |
303 | .id = -1, | |
304 | }; | |
305 | #endif | |
306 | ||
307 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
308 | static struct resource smc91x_resources[] = { | |
309 | { | |
310 | .name = "smc91x-regs", | |
311 | .start = 0x20300300, | |
312 | .end = 0x20300300 + 16, | |
313 | .flags = IORESOURCE_MEM, | |
314 | }, { | |
315 | ||
316 | .start = IRQ_PF7, | |
317 | .end = IRQ_PF7, | |
318 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
319 | }, | |
320 | }; | |
321 | static struct platform_device smc91x_device = { | |
322 | .name = "smc91x", | |
323 | .id = 0, | |
324 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
325 | .resource = smc91x_resources, | |
326 | }; | |
327 | #endif | |
328 | ||
329 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
330 | static struct resource dm9000_resources[] = { | |
331 | [0] = { | |
332 | .start = 0x203FB800, | |
da3854fc | 333 | .end = 0x203FB800 + 1, |
59003145 MH |
334 | .flags = IORESOURCE_MEM, |
335 | }, | |
336 | [1] = { | |
da3854fc LP |
337 | .start = 0x203FB800 + 4, |
338 | .end = 0x203FB800 + 5, | |
339 | .flags = IORESOURCE_MEM, | |
340 | }, | |
341 | [2] = { | |
59003145 MH |
342 | .start = IRQ_PF9, |
343 | .end = IRQ_PF9, | |
344 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), | |
345 | }, | |
346 | }; | |
347 | ||
348 | static struct platform_device dm9000_device = { | |
349 | .name = "dm9000", | |
350 | .id = -1, | |
351 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
352 | .resource = dm9000_resources, | |
353 | }; | |
354 | #endif | |
355 | ||
356 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
357 | static struct resource sl811_hcd_resources[] = { | |
358 | { | |
359 | .start = 0x20340000, | |
360 | .end = 0x20340000, | |
361 | .flags = IORESOURCE_MEM, | |
362 | }, { | |
363 | .start = 0x20340004, | |
364 | .end = 0x20340004, | |
365 | .flags = IORESOURCE_MEM, | |
366 | }, { | |
367 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
368 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
369 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
370 | }, | |
371 | }; | |
372 | ||
373 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
374 | void sl811_port_power(struct device *dev, int is_on) | |
375 | { | |
376 | gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); | |
acbcd263 | 377 | gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); |
59003145 MH |
378 | } |
379 | #endif | |
380 | ||
381 | static struct sl811_platform_data sl811_priv = { | |
382 | .potpg = 10, | |
383 | .power = 250, /* == 500mA */ | |
384 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
385 | .port_power = &sl811_port_power, | |
386 | #endif | |
387 | }; | |
388 | ||
389 | static struct platform_device sl811_hcd_device = { | |
390 | .name = "sl811-hcd", | |
391 | .id = 0, | |
392 | .dev = { | |
393 | .platform_data = &sl811_priv, | |
394 | }, | |
395 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
396 | .resource = sl811_hcd_resources, | |
397 | }; | |
398 | #endif | |
399 | ||
400 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
401 | static struct resource isp1362_hcd_resources[] = { | |
402 | { | |
403 | .start = 0x20360000, | |
404 | .end = 0x20360000, | |
405 | .flags = IORESOURCE_MEM, | |
406 | }, { | |
407 | .start = 0x20360004, | |
408 | .end = 0x20360004, | |
409 | .flags = IORESOURCE_MEM, | |
410 | }, { | |
411 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
412 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
413 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
414 | }, | |
415 | }; | |
416 | ||
417 | static struct isp1362_platform_data isp1362_priv = { | |
418 | .sel15Kres = 1, | |
419 | .clknotstop = 0, | |
420 | .oc_enable = 0, | |
421 | .int_act_high = 0, | |
422 | .int_edge_triggered = 0, | |
423 | .remote_wakeup_connected = 0, | |
424 | .no_power_switching = 1, | |
425 | .power_switching_mode = 0, | |
426 | }; | |
427 | ||
428 | static struct platform_device isp1362_hcd_device = { | |
429 | .name = "isp1362-hcd", | |
430 | .id = 0, | |
431 | .dev = { | |
432 | .platform_data = &isp1362_priv, | |
433 | }, | |
434 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
435 | .resource = isp1362_hcd_resources, | |
436 | }; | |
437 | #endif | |
438 | ||
439 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
440 | static struct platform_device bfin_mac_device = { | |
441 | .name = "bfin_mac", | |
442 | }; | |
443 | #endif | |
444 | ||
445 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
446 | static struct resource net2272_bfin_resources[] = { | |
447 | { | |
448 | .start = 0x20300000, | |
449 | .end = 0x20300000 + 0x100, | |
450 | .flags = IORESOURCE_MEM, | |
451 | }, { | |
452 | .start = IRQ_PF7, | |
453 | .end = IRQ_PF7, | |
454 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
455 | }, | |
456 | }; | |
457 | ||
458 | static struct platform_device net2272_bfin_device = { | |
459 | .name = "net2272", | |
460 | .id = -1, | |
461 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
462 | .resource = net2272_bfin_resources, | |
463 | }; | |
464 | #endif | |
465 | ||
59003145 MH |
466 | #if defined(CONFIG_MTD_M25P80) \ |
467 | || defined(CONFIG_MTD_M25P80_MODULE) | |
468 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
469 | { | |
aa582977 | 470 | .name = "bootloader(spi)", |
ac76d889 | 471 | .size = 0x00040000, |
59003145 MH |
472 | .offset = 0, |
473 | .mask_flags = MTD_CAP_ROM | |
474 | }, { | |
aa582977 | 475 | .name = "linux kernel(spi)", |
edf05641 MF |
476 | .size = MTDPART_SIZ_FULL, |
477 | .offset = MTDPART_OFS_APPEND, | |
59003145 MH |
478 | } |
479 | }; | |
480 | ||
481 | static struct flash_platform_data bfin_spi_flash_data = { | |
482 | .name = "m25p80", | |
483 | .parts = bfin_spi_flash_partitions, | |
484 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
b9c9e788 | 485 | .type = "m25p16", |
59003145 MH |
486 | }; |
487 | ||
488 | /* SPI flash chip (m25p64) */ | |
489 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
490 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
491 | .bits_per_word = 8, | |
492 | }; | |
493 | #endif | |
494 | ||
495 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
496 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
497 | /* SPI ADC chip */ | |
498 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
499 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
500 | .bits_per_word = 16, | |
501 | }; | |
502 | #endif | |
503 | ||
504 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
505 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
506 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
507 | .enable_dma = 0, | |
508 | .bits_per_word = 16, | |
509 | }; | |
510 | #endif | |
511 | ||
512 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
513 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | |
514 | .enable_dma = 0, | |
515 | .bits_per_word = 16, | |
516 | }; | |
517 | #endif | |
518 | ||
519 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
520 | static struct bfin5xx_spi_chip spi_mmc_chip_info = { | |
521 | .enable_dma = 1, | |
522 | .bits_per_word = 8, | |
523 | }; | |
524 | #endif | |
525 | ||
526 | #if defined(CONFIG_PBX) | |
527 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
528 | .ctl_reg = 0x4, /* send zero */ | |
529 | .enable_dma = 0, | |
530 | .bits_per_word = 8, | |
531 | .cs_change_per_word = 1, | |
532 | }; | |
533 | #endif | |
534 | ||
59003145 MH |
535 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
536 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
537 | .enable_dma = 0, | |
538 | .bits_per_word = 16, | |
539 | }; | |
540 | ||
541 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
542 | .model = 7877, | |
543 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
544 | .x_plate_ohms = 419, | |
545 | .y_plate_ohms = 486, | |
546 | .pressure_max = 1000, | |
547 | .pressure_min = 0, | |
548 | .stopacq_polarity = 1, | |
549 | .first_conversion_delay = 3, | |
550 | .acquisition_time = 1, | |
551 | .averaging = 1, | |
552 | .pen_down_acc_interval = 1, | |
553 | }; | |
554 | #endif | |
555 | ||
c7d48966 | 556 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ |
0954f70a MH |
557 | && defined(CONFIG_SND_SOC_WM8731_SPI) |
558 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
559 | .enable_dma = 0, | |
560 | .bits_per_word = 16, | |
561 | }; | |
562 | #endif | |
6e668936 MH |
563 | |
564 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
565 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
566 | .enable_dma = 0, | |
567 | .bits_per_word = 8, | |
568 | }; | |
569 | #endif | |
570 | ||
59003145 MH |
571 | static struct spi_board_info bfin_spi_board_info[] __initdata = { |
572 | #if defined(CONFIG_MTD_M25P80) \ | |
573 | || defined(CONFIG_MTD_M25P80_MODULE) | |
574 | { | |
575 | /* the modalias must be the same as spi device driver name */ | |
576 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
577 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
578 | .bus_num = 0, /* Framework bus number */ | |
579 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
580 | .platform_data = &bfin_spi_flash_data, | |
581 | .controller_data = &spi_flash_chip_info, | |
582 | .mode = SPI_MODE_3, | |
583 | }, | |
584 | #endif | |
585 | ||
586 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
587 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
588 | { | |
589 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
590 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
591 | .bus_num = 0, /* Framework bus number */ | |
592 | .chip_select = 1, /* Framework chip select. */ | |
593 | .platform_data = NULL, /* No spi_driver specific config */ | |
594 | .controller_data = &spi_adc_chip_info, | |
595 | }, | |
596 | #endif | |
597 | ||
598 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
599 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
600 | { | |
601 | .modalias = "ad1836-spi", | |
602 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
603 | .bus_num = 0, | |
604 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
605 | .controller_data = &ad1836_spi_chip_info, | |
606 | }, | |
607 | #endif | |
608 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
609 | { | |
610 | .modalias = "ad9960-spi", | |
611 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | |
612 | .bus_num = 0, | |
613 | .chip_select = 1, | |
614 | .controller_data = &ad9960_spi_chip_info, | |
615 | }, | |
616 | #endif | |
617 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
618 | { | |
619 | .modalias = "spi_mmc_dummy", | |
620 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
621 | .bus_num = 0, | |
622 | .chip_select = 0, | |
623 | .platform_data = NULL, | |
624 | .controller_data = &spi_mmc_chip_info, | |
625 | .mode = SPI_MODE_3, | |
626 | }, | |
627 | { | |
628 | .modalias = "spi_mmc", | |
629 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
630 | .bus_num = 0, | |
631 | .chip_select = CONFIG_SPI_MMC_CS_CHAN, | |
632 | .platform_data = NULL, | |
633 | .controller_data = &spi_mmc_chip_info, | |
634 | .mode = SPI_MODE_3, | |
635 | }, | |
636 | #endif | |
637 | #if defined(CONFIG_PBX) | |
638 | { | |
639 | .modalias = "fxs-spi", | |
640 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
641 | .bus_num = 0, | |
642 | .chip_select = 8 - CONFIG_J11_JUMPER, | |
643 | .controller_data = &spi_si3xxx_chip_info, | |
644 | .mode = SPI_MODE_3, | |
645 | }, | |
646 | { | |
647 | .modalias = "fxo-spi", | |
648 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
649 | .bus_num = 0, | |
650 | .chip_select = 8 - CONFIG_J19_JUMPER, | |
651 | .controller_data = &spi_si3xxx_chip_info, | |
652 | .mode = SPI_MODE_3, | |
653 | }, | |
654 | #endif | |
59003145 MH |
655 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
656 | { | |
657 | .modalias = "ad7877", | |
658 | .platform_data = &bfin_ad7877_ts_info, | |
2eb74ae2 | 659 | .irq = IRQ_PF8, |
59003145 | 660 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ |
0954f70a | 661 | .bus_num = 0, |
2eb74ae2 | 662 | .chip_select = 2, |
59003145 MH |
663 | .controller_data = &spi_ad7877_chip_info, |
664 | }, | |
665 | #endif | |
c7d48966 | 666 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ |
0954f70a MH |
667 | && defined(CONFIG_SND_SOC_WM8731_SPI) |
668 | { | |
669 | .modalias = "wm8731", | |
670 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
671 | .bus_num = 0, | |
672 | .chip_select = 5, | |
673 | .controller_data = &spi_wm8731_chip_info, | |
674 | .mode = SPI_MODE_0, | |
675 | }, | |
676 | #endif | |
6e668936 MH |
677 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
678 | { | |
679 | .modalias = "spidev", | |
680 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
681 | .bus_num = 0, | |
682 | .chip_select = 1, | |
683 | .controller_data = &spidev_chip_info, | |
684 | }, | |
685 | #endif | |
59003145 MH |
686 | }; |
687 | ||
5bda2723 | 688 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) |
59003145 MH |
689 | /* SPI controller data */ |
690 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
691 | .num_chipselect = 8, | |
692 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
5d448dd5 | 693 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, |
59003145 MH |
694 | }; |
695 | ||
696 | /* SPI (0) */ | |
697 | static struct resource bfin_spi0_resource[] = { | |
698 | [0] = { | |
699 | .start = SPI0_REGBASE, | |
700 | .end = SPI0_REGBASE + 0xFF, | |
701 | .flags = IORESOURCE_MEM, | |
702 | }, | |
703 | [1] = { | |
704 | .start = CH_SPI, | |
705 | .end = CH_SPI, | |
706 | .flags = IORESOURCE_IRQ, | |
707 | }, | |
708 | }; | |
709 | ||
710 | static struct platform_device bfin_spi0_device = { | |
711 | .name = "bfin-spi", | |
712 | .id = 0, /* Bus number */ | |
713 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
714 | .resource = bfin_spi0_resource, | |
715 | .dev = { | |
716 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
717 | }, | |
718 | }; | |
719 | #endif /* spi master and devices */ | |
720 | ||
721 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
722 | static struct platform_device bfin_fb_device = { | |
723 | .name = "bf537-lq035", | |
724 | }; | |
725 | #endif | |
726 | ||
727 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
728 | static struct platform_device bfin_fb_adv7393_device = { | |
729 | .name = "bfin-adv7393", | |
730 | }; | |
731 | #endif | |
732 | ||
733 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
734 | static struct resource bfin_uart_resources[] = { | |
735 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
736 | { | |
737 | .start = 0xFFC00400, | |
738 | .end = 0xFFC004FF, | |
739 | .flags = IORESOURCE_MEM, | |
740 | }, | |
741 | #endif | |
742 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
743 | { | |
744 | .start = 0xFFC02000, | |
745 | .end = 0xFFC020FF, | |
746 | .flags = IORESOURCE_MEM, | |
747 | }, | |
748 | #endif | |
749 | }; | |
750 | ||
751 | static struct platform_device bfin_uart_device = { | |
752 | .name = "bfin-uart", | |
753 | .id = 1, | |
754 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
755 | .resource = bfin_uart_resources, | |
756 | }; | |
757 | #endif | |
758 | ||
5be36d22 GY |
759 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
760 | static struct resource bfin_sir_resources[] = { | |
761 | #ifdef CONFIG_BFIN_SIR0 | |
762 | { | |
763 | .start = 0xFFC00400, | |
764 | .end = 0xFFC004FF, | |
765 | .flags = IORESOURCE_MEM, | |
766 | }, | |
767 | #endif | |
768 | #ifdef CONFIG_BFIN_SIR1 | |
769 | { | |
770 | .start = 0xFFC02000, | |
771 | .end = 0xFFC020FF, | |
772 | .flags = IORESOURCE_MEM, | |
773 | }, | |
774 | #endif | |
775 | }; | |
776 | ||
777 | static struct platform_device bfin_sir_device = { | |
778 | .name = "bfin_sir", | |
779 | .id = 0, | |
780 | .num_resources = ARRAY_SIZE(bfin_sir_resources), | |
781 | .resource = bfin_sir_resources, | |
782 | }; | |
783 | #endif | |
784 | ||
59003145 MH |
785 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
786 | static struct resource bfin_twi0_resource[] = { | |
787 | [0] = { | |
788 | .start = TWI0_REGBASE, | |
789 | .end = TWI0_REGBASE, | |
790 | .flags = IORESOURCE_MEM, | |
791 | }, | |
792 | [1] = { | |
793 | .start = IRQ_TWI, | |
794 | .end = IRQ_TWI, | |
795 | .flags = IORESOURCE_IRQ, | |
796 | }, | |
797 | }; | |
798 | ||
799 | static struct platform_device i2c_bfin_twi_device = { | |
800 | .name = "i2c-bfin-twi", | |
801 | .id = 0, | |
802 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
803 | .resource = bfin_twi0_resource, | |
804 | }; | |
805 | #endif | |
806 | ||
72268689 BW |
807 | #ifdef CONFIG_I2C_BOARDINFO |
808 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { | |
809 | #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) | |
810 | { | |
811 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
72268689 BW |
812 | }, |
813 | #endif | |
814 | #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) | |
815 | { | |
816 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
72268689 BW |
817 | .irq = IRQ_PF8, |
818 | }, | |
819 | #endif | |
820 | }; | |
821 | #endif | |
822 | ||
59003145 MH |
823 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) |
824 | static struct platform_device bfin_sport0_uart_device = { | |
825 | .name = "bfin-sport-uart", | |
826 | .id = 0, | |
827 | }; | |
828 | ||
829 | static struct platform_device bfin_sport1_uart_device = { | |
830 | .name = "bfin-sport-uart", | |
831 | .id = 1, | |
832 | }; | |
833 | #endif | |
834 | ||
1089e228 MH |
835 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
836 | #include <linux/input.h> | |
837 | #include <linux/gpio_keys.h> | |
838 | ||
839 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
840 | {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, | |
841 | {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, | |
842 | }; | |
843 | ||
844 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
845 | .buttons = bfin_gpio_keys_table, | |
846 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
847 | }; | |
848 | ||
849 | static struct platform_device bfin_device_gpiokeys = { | |
850 | .name = "gpio-keys", | |
851 | .dev = { | |
852 | .platform_data = &bfin_gpio_keys_data, | |
853 | }, | |
854 | }; | |
855 | #endif | |
856 | ||
cad2ab65 MF |
857 | static struct resource bfin_gpios_resources = { |
858 | .start = 0, | |
859 | .end = MAX_BLACKFIN_GPIOS - 1, | |
860 | .flags = IORESOURCE_IRQ, | |
861 | }; | |
862 | ||
863 | static struct platform_device bfin_gpios_device = { | |
864 | .name = "simple-gpio", | |
865 | .id = -1, | |
866 | .num_resources = 1, | |
867 | .resource = &bfin_gpios_resources, | |
868 | }; | |
869 | ||
14b03204 MH |
870 | static const unsigned int cclk_vlev_datasheet[] = |
871 | { | |
872 | VRPAIR(VLEV_100, 400000000), | |
873 | VRPAIR(VLEV_105, 426000000), | |
874 | VRPAIR(VLEV_110, 500000000), | |
875 | VRPAIR(VLEV_115, 533000000), | |
876 | VRPAIR(VLEV_120, 600000000), | |
877 | }; | |
878 | ||
879 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
880 | .tuple_tab = cclk_vlev_datasheet, | |
881 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
882 | .vr_settling_time = 25 /* us */, | |
883 | }; | |
884 | ||
885 | static struct platform_device bfin_dpmc = { | |
886 | .name = "bfin dpmc", | |
887 | .dev = { | |
888 | .platform_data = &bfin_dmpc_vreg_data, | |
889 | }, | |
890 | }; | |
891 | ||
59003145 | 892 | static struct platform_device *stamp_devices[] __initdata = { |
14b03204 MH |
893 | |
894 | &bfin_dpmc, | |
895 | ||
64307f7d MH |
896 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) |
897 | &bf5xx_nand_device, | |
898 | #endif | |
899 | ||
59003145 MH |
900 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) |
901 | &bfin_pcmcia_cf_device, | |
902 | #endif | |
903 | ||
904 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
905 | &rtc_device, | |
906 | #endif | |
907 | ||
908 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
909 | &sl811_hcd_device, | |
910 | #endif | |
911 | ||
912 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
913 | &isp1362_hcd_device, | |
914 | #endif | |
915 | ||
1089e228 MH |
916 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
917 | &musb_device, | |
918 | #endif | |
919 | ||
59003145 MH |
920 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) |
921 | &smc91x_device, | |
922 | #endif | |
923 | ||
924 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
925 | &dm9000_device, | |
926 | #endif | |
927 | ||
928 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
929 | &bfin_mac_device, | |
930 | #endif | |
931 | ||
932 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
933 | &net2272_bfin_device, | |
934 | #endif | |
935 | ||
936 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
937 | &bfin_spi0_device, | |
938 | #endif | |
939 | ||
940 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
941 | &bfin_fb_device, | |
942 | #endif | |
943 | ||
1089e228 MH |
944 | #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) |
945 | &bf52x_t350mcqb_device, | |
946 | #endif | |
947 | ||
59003145 MH |
948 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) |
949 | &bfin_fb_adv7393_device, | |
950 | #endif | |
951 | ||
952 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
953 | &bfin_uart_device, | |
954 | #endif | |
955 | ||
5be36d22 GY |
956 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
957 | &bfin_sir_device, | |
958 | #endif | |
959 | ||
59003145 MH |
960 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
961 | &i2c_bfin_twi_device, | |
962 | #endif | |
963 | ||
964 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
965 | &bfin_sport0_uart_device, | |
966 | &bfin_sport1_uart_device, | |
967 | #endif | |
968 | ||
1089e228 MH |
969 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
970 | &bfin_device_gpiokeys, | |
971 | #endif | |
cad2ab65 | 972 | |
d7e5dd41 MH |
973 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
974 | &ezkit_flash_device, | |
975 | #endif | |
976 | ||
cad2ab65 | 977 | &bfin_gpios_device, |
59003145 MH |
978 | }; |
979 | ||
980 | static int __init stamp_init(void) | |
981 | { | |
b85d858b | 982 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
72268689 BW |
983 | |
984 | #ifdef CONFIG_I2C_BOARDINFO | |
985 | i2c_register_board_info(0, bfin_i2c_board_info, | |
986 | ARRAY_SIZE(bfin_i2c_board_info)); | |
987 | #endif | |
988 | ||
59003145 | 989 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); |
5bda2723 | 990 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); |
59003145 MH |
991 | return 0; |
992 | } | |
993 | ||
994 | arch_initcall(stamp_init); | |
995 | ||
996 | void native_machine_restart(char *cmd) | |
997 | { | |
998 | /* workaround reboot hang when booting from SPI */ | |
999 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
1000 | bfin_gpio_reset_spi0_ssel1(); | |
1001 | } | |
137b1529 | 1002 | |
9862cc52 | 1003 | void bfin_get_ether_addr(char *addr) |
137b1529 | 1004 | { |
181afa94 MF |
1005 | /* the MAC is stored in OTP memory page 0xDF */ |
1006 | u32 ret; | |
1007 | u64 otp_mac; | |
1008 | u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; | |
1009 | ||
1010 | ret = otp_read(0xDF, 0x00, &otp_mac); | |
1011 | if (!(ret & 0x1)) { | |
1012 | char *otp_mac_p = (char *)&otp_mac; | |
1013 | for (ret = 0; ret < 6; ++ret) | |
1014 | addr[ret] = otp_mac_p[5 - ret]; | |
1015 | } | |
137b1529 | 1016 | } |
9862cc52 | 1017 | EXPORT_SYMBOL(bfin_get_ether_addr); |