Commit | Line | Data |
---|---|---|
59003145 MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/ezkit.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
a628a8bc | 11 | * Copyright 2004-2008 Analog Devices Inc. |
59003145 MH |
12 | * |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
d7e5dd41 | 35 | #include <linux/mtd/physmap.h> |
59003145 MH |
36 | #include <linux/spi/spi.h> |
37 | #include <linux/spi/flash.h> | |
38 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
f02bcec5 | 39 | #include <linux/usb/isp1362.h> |
59003145 | 40 | #endif |
72268689 | 41 | #include <linux/i2c.h> |
59003145 MH |
42 | #include <linux/irq.h> |
43 | #include <linux/interrupt.h> | |
632f658b | 44 | #include <linux/usb/sl811.h> |
1089e228 | 45 | #include <linux/usb/musb.h> |
59003145 MH |
46 | #include <asm/dma.h> |
47 | #include <asm/bfin5xx_spi.h> | |
48 | #include <asm/reboot.h> | |
64307f7d | 49 | #include <asm/nand.h> |
5d448dd5 | 50 | #include <asm/portmux.h> |
14b03204 | 51 | #include <asm/dpmc.h> |
59003145 MH |
52 | #include <linux/spi/ad7877.h> |
53 | ||
54 | /* | |
55 | * Name the Board for the /proc/cpuinfo | |
56 | */ | |
fe85cad2 | 57 | const char bfin_board_name[] = "ADI BF527-EZKIT"; |
59003145 MH |
58 | |
59 | /* | |
60 | * Driver needs to know address, irq and flag pin. | |
61 | */ | |
62 | ||
59003145 | 63 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
3f375690 MH |
64 | #include <linux/usb/isp1760.h> |
65 | static struct resource bfin_isp1760_resources[] = { | |
59003145 | 66 | [0] = { |
3f375690 MH |
67 | .start = 0x203C0000, |
68 | .end = 0x203C0000 + 0x000fffff, | |
59003145 MH |
69 | .flags = IORESOURCE_MEM, |
70 | }, | |
71 | [1] = { | |
3f375690 MH |
72 | .start = IRQ_PF7, |
73 | .end = IRQ_PF7, | |
59003145 MH |
74 | .flags = IORESOURCE_IRQ, |
75 | }, | |
76 | }; | |
77 | ||
3f375690 MH |
78 | static struct isp1760_platform_data isp1760_priv = { |
79 | .is_isp1761 = 0, | |
3f375690 MH |
80 | .bus_width_16 = 1, |
81 | .port1_otg = 0, | |
82 | .analog_oc = 0, | |
83 | .dack_polarity_high = 0, | |
84 | .dreq_polarity_high = 0, | |
59003145 MH |
85 | }; |
86 | ||
3f375690 MH |
87 | static struct platform_device bfin_isp1760_device = { |
88 | .name = "isp1760-hcd", | |
89 | .id = 0, | |
90 | .dev = { | |
91 | .platform_data = &isp1760_priv, | |
92 | }, | |
93 | .num_resources = ARRAY_SIZE(bfin_isp1760_resources), | |
94 | .resource = bfin_isp1760_resources, | |
59003145 | 95 | }; |
59003145 MH |
96 | #endif |
97 | ||
1089e228 MH |
98 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
99 | static struct resource musb_resources[] = { | |
100 | [0] = { | |
101 | .start = 0xffc03800, | |
102 | .end = 0xffc03cff, | |
103 | .flags = IORESOURCE_MEM, | |
104 | }, | |
105 | [1] = { /* general IRQ */ | |
106 | .start = IRQ_USB_INT0, | |
107 | .end = IRQ_USB_INT0, | |
108 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
109 | }, | |
110 | [2] = { /* DMA IRQ */ | |
111 | .start = IRQ_USB_DMA, | |
112 | .end = IRQ_USB_DMA, | |
113 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
114 | }, | |
115 | }; | |
116 | ||
50041acb BW |
117 | static struct musb_hdrc_config musb_config = { |
118 | .multipoint = 0, | |
119 | .dyn_fifo = 0, | |
120 | .soft_con = 1, | |
121 | .dma = 1, | |
fea05dac BW |
122 | .num_eps = 8, |
123 | .dma_channels = 8, | |
50041acb BW |
124 | .gpio_vrsel = GPIO_PG13, |
125 | }; | |
126 | ||
1089e228 MH |
127 | static struct musb_hdrc_platform_data musb_plat = { |
128 | #if defined(CONFIG_USB_MUSB_OTG) | |
129 | .mode = MUSB_OTG, | |
130 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
131 | .mode = MUSB_HOST, | |
132 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
133 | .mode = MUSB_PERIPHERAL, | |
134 | #endif | |
50041acb | 135 | .config = &musb_config, |
1089e228 MH |
136 | }; |
137 | ||
138 | static u64 musb_dmamask = ~(u32)0; | |
139 | ||
140 | static struct platform_device musb_device = { | |
141 | .name = "musb_hdrc", | |
142 | .id = 0, | |
143 | .dev = { | |
144 | .dma_mask = &musb_dmamask, | |
145 | .coherent_dma_mask = 0xffffffff, | |
146 | .platform_data = &musb_plat, | |
147 | }, | |
148 | .num_resources = ARRAY_SIZE(musb_resources), | |
149 | .resource = musb_resources, | |
150 | }; | |
151 | #endif | |
152 | ||
153 | #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) | |
154 | ||
155 | static struct resource bf52x_t350mcqb_resources[] = { | |
156 | { | |
157 | .start = IRQ_PPI_ERROR, | |
158 | .end = IRQ_PPI_ERROR, | |
159 | .flags = IORESOURCE_IRQ, | |
160 | }, | |
161 | }; | |
162 | ||
163 | static struct platform_device bf52x_t350mcqb_device = { | |
164 | .name = "bfin-t350mcqb", | |
165 | .id = -1, | |
166 | .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources), | |
167 | .resource = bf52x_t350mcqb_resources, | |
168 | }; | |
169 | #endif | |
170 | ||
d7e5dd41 MH |
171 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
172 | static struct mtd_partition ezkit_partitions[] = { | |
173 | { | |
aa582977 | 174 | .name = "bootloader(nor)", |
d7e5dd41 MH |
175 | .size = 0x40000, |
176 | .offset = 0, | |
177 | }, { | |
aa582977 | 178 | .name = "linux kernel(nor)", |
d7e5dd41 MH |
179 | .size = 0x1C0000, |
180 | .offset = MTDPART_OFS_APPEND, | |
181 | }, { | |
aa582977 | 182 | .name = "file system(nor)", |
d7e5dd41 MH |
183 | .size = MTDPART_SIZ_FULL, |
184 | .offset = MTDPART_OFS_APPEND, | |
185 | } | |
186 | }; | |
187 | ||
188 | static struct physmap_flash_data ezkit_flash_data = { | |
189 | .width = 2, | |
190 | .parts = ezkit_partitions, | |
191 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
192 | }; | |
193 | ||
194 | static struct resource ezkit_flash_resource = { | |
195 | .start = 0x20000000, | |
196 | .end = 0x203fffff, | |
197 | .flags = IORESOURCE_MEM, | |
198 | }; | |
199 | ||
200 | static struct platform_device ezkit_flash_device = { | |
201 | .name = "physmap-flash", | |
202 | .id = 0, | |
203 | .dev = { | |
204 | .platform_data = &ezkit_flash_data, | |
205 | }, | |
206 | .num_resources = 1, | |
207 | .resource = &ezkit_flash_resource, | |
208 | }; | |
209 | #endif | |
210 | ||
64307f7d MH |
211 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) |
212 | static struct mtd_partition partition_info[] = { | |
213 | { | |
aa582977 | 214 | .name = "linux kernel(nand)", |
64307f7d | 215 | .offset = 0, |
f4585a08 | 216 | .size = 4 * 1024 * 1024, |
64307f7d MH |
217 | }, |
218 | { | |
aa582977 | 219 | .name = "file system(nand)", |
edf05641 MF |
220 | .offset = MTDPART_OFS_APPEND, |
221 | .size = MTDPART_SIZ_FULL, | |
64307f7d MH |
222 | }, |
223 | }; | |
224 | ||
225 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
226 | .page_size = NFC_PG_SIZE_256, | |
227 | .data_width = NFC_NWIDTH_8, | |
228 | .partitions = partition_info, | |
229 | .nr_partitions = ARRAY_SIZE(partition_info), | |
230 | .rd_dly = 3, | |
231 | .wr_dly = 3, | |
232 | }; | |
233 | ||
234 | static struct resource bf5xx_nand_resources[] = { | |
235 | { | |
236 | .start = NFC_CTL, | |
237 | .end = NFC_DATA_RD + 2, | |
238 | .flags = IORESOURCE_MEM, | |
239 | }, | |
240 | { | |
241 | .start = CH_NFC, | |
242 | .end = CH_NFC, | |
243 | .flags = IORESOURCE_IRQ, | |
244 | }, | |
245 | }; | |
246 | ||
247 | static struct platform_device bf5xx_nand_device = { | |
248 | .name = "bf5xx-nand", | |
249 | .id = 0, | |
250 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
251 | .resource = bf5xx_nand_resources, | |
252 | .dev = { | |
253 | .platform_data = &bf5xx_nand_platform, | |
254 | }, | |
255 | }; | |
256 | #endif | |
257 | ||
59003145 MH |
258 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) |
259 | static struct resource bfin_pcmcia_cf_resources[] = { | |
260 | { | |
261 | .start = 0x20310000, /* IO PORT */ | |
262 | .end = 0x20312000, | |
263 | .flags = IORESOURCE_MEM, | |
264 | }, { | |
265 | .start = 0x20311000, /* Attribute Memory */ | |
266 | .end = 0x20311FFF, | |
267 | .flags = IORESOURCE_MEM, | |
268 | }, { | |
269 | .start = IRQ_PF4, | |
270 | .end = IRQ_PF4, | |
271 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
272 | }, { | |
273 | .start = 6, /* Card Detect PF6 */ | |
274 | .end = 6, | |
275 | .flags = IORESOURCE_IRQ, | |
276 | }, | |
277 | }; | |
278 | ||
279 | static struct platform_device bfin_pcmcia_cf_device = { | |
280 | .name = "bfin_cf_pcmcia", | |
281 | .id = -1, | |
282 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
283 | .resource = bfin_pcmcia_cf_resources, | |
284 | }; | |
285 | #endif | |
286 | ||
287 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
288 | static struct platform_device rtc_device = { | |
289 | .name = "rtc-bfin", | |
290 | .id = -1, | |
291 | }; | |
292 | #endif | |
293 | ||
294 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
295 | static struct resource smc91x_resources[] = { | |
296 | { | |
297 | .name = "smc91x-regs", | |
298 | .start = 0x20300300, | |
299 | .end = 0x20300300 + 16, | |
300 | .flags = IORESOURCE_MEM, | |
301 | }, { | |
302 | ||
303 | .start = IRQ_PF7, | |
304 | .end = IRQ_PF7, | |
305 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
306 | }, | |
307 | }; | |
308 | static struct platform_device smc91x_device = { | |
309 | .name = "smc91x", | |
310 | .id = 0, | |
311 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
312 | .resource = smc91x_resources, | |
313 | }; | |
314 | #endif | |
315 | ||
316 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
317 | static struct resource dm9000_resources[] = { | |
318 | [0] = { | |
319 | .start = 0x203FB800, | |
da3854fc | 320 | .end = 0x203FB800 + 1, |
59003145 MH |
321 | .flags = IORESOURCE_MEM, |
322 | }, | |
323 | [1] = { | |
da3854fc LP |
324 | .start = 0x203FB800 + 4, |
325 | .end = 0x203FB800 + 5, | |
326 | .flags = IORESOURCE_MEM, | |
327 | }, | |
328 | [2] = { | |
59003145 MH |
329 | .start = IRQ_PF9, |
330 | .end = IRQ_PF9, | |
331 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), | |
332 | }, | |
333 | }; | |
334 | ||
335 | static struct platform_device dm9000_device = { | |
336 | .name = "dm9000", | |
337 | .id = -1, | |
338 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
339 | .resource = dm9000_resources, | |
340 | }; | |
341 | #endif | |
342 | ||
343 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
344 | static struct resource sl811_hcd_resources[] = { | |
345 | { | |
346 | .start = 0x20340000, | |
347 | .end = 0x20340000, | |
348 | .flags = IORESOURCE_MEM, | |
349 | }, { | |
350 | .start = 0x20340004, | |
351 | .end = 0x20340004, | |
352 | .flags = IORESOURCE_MEM, | |
353 | }, { | |
354 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
355 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
356 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
357 | }, | |
358 | }; | |
359 | ||
360 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
361 | void sl811_port_power(struct device *dev, int is_on) | |
362 | { | |
363 | gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); | |
acbcd263 | 364 | gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); |
59003145 MH |
365 | } |
366 | #endif | |
367 | ||
368 | static struct sl811_platform_data sl811_priv = { | |
369 | .potpg = 10, | |
370 | .power = 250, /* == 500mA */ | |
371 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
372 | .port_power = &sl811_port_power, | |
373 | #endif | |
374 | }; | |
375 | ||
376 | static struct platform_device sl811_hcd_device = { | |
377 | .name = "sl811-hcd", | |
378 | .id = 0, | |
379 | .dev = { | |
380 | .platform_data = &sl811_priv, | |
381 | }, | |
382 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
383 | .resource = sl811_hcd_resources, | |
384 | }; | |
385 | #endif | |
386 | ||
387 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
388 | static struct resource isp1362_hcd_resources[] = { | |
389 | { | |
390 | .start = 0x20360000, | |
391 | .end = 0x20360000, | |
392 | .flags = IORESOURCE_MEM, | |
393 | }, { | |
394 | .start = 0x20360004, | |
395 | .end = 0x20360004, | |
396 | .flags = IORESOURCE_MEM, | |
397 | }, { | |
398 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
399 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
400 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
401 | }, | |
402 | }; | |
403 | ||
404 | static struct isp1362_platform_data isp1362_priv = { | |
405 | .sel15Kres = 1, | |
406 | .clknotstop = 0, | |
407 | .oc_enable = 0, | |
408 | .int_act_high = 0, | |
409 | .int_edge_triggered = 0, | |
410 | .remote_wakeup_connected = 0, | |
411 | .no_power_switching = 1, | |
412 | .power_switching_mode = 0, | |
413 | }; | |
414 | ||
415 | static struct platform_device isp1362_hcd_device = { | |
416 | .name = "isp1362-hcd", | |
417 | .id = 0, | |
418 | .dev = { | |
419 | .platform_data = &isp1362_priv, | |
420 | }, | |
421 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
422 | .resource = isp1362_hcd_resources, | |
423 | }; | |
424 | #endif | |
425 | ||
426 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
65319628 GY |
427 | static struct platform_device bfin_mii_bus = { |
428 | .name = "bfin_mii_bus", | |
429 | }; | |
430 | ||
59003145 MH |
431 | static struct platform_device bfin_mac_device = { |
432 | .name = "bfin_mac", | |
65319628 | 433 | .dev.platform_data = &bfin_mii_bus, |
59003145 MH |
434 | }; |
435 | #endif | |
436 | ||
437 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
438 | static struct resource net2272_bfin_resources[] = { | |
439 | { | |
440 | .start = 0x20300000, | |
441 | .end = 0x20300000 + 0x100, | |
442 | .flags = IORESOURCE_MEM, | |
443 | }, { | |
444 | .start = IRQ_PF7, | |
445 | .end = IRQ_PF7, | |
446 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
447 | }, | |
448 | }; | |
449 | ||
450 | static struct platform_device net2272_bfin_device = { | |
451 | .name = "net2272", | |
452 | .id = -1, | |
453 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
454 | .resource = net2272_bfin_resources, | |
455 | }; | |
456 | #endif | |
457 | ||
59003145 MH |
458 | #if defined(CONFIG_MTD_M25P80) \ |
459 | || defined(CONFIG_MTD_M25P80_MODULE) | |
460 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
461 | { | |
aa582977 | 462 | .name = "bootloader(spi)", |
ac76d889 | 463 | .size = 0x00040000, |
59003145 MH |
464 | .offset = 0, |
465 | .mask_flags = MTD_CAP_ROM | |
466 | }, { | |
aa582977 | 467 | .name = "linux kernel(spi)", |
edf05641 MF |
468 | .size = MTDPART_SIZ_FULL, |
469 | .offset = MTDPART_OFS_APPEND, | |
59003145 MH |
470 | } |
471 | }; | |
472 | ||
473 | static struct flash_platform_data bfin_spi_flash_data = { | |
474 | .name = "m25p80", | |
475 | .parts = bfin_spi_flash_partitions, | |
476 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
b9c9e788 | 477 | .type = "m25p16", |
59003145 MH |
478 | }; |
479 | ||
480 | /* SPI flash chip (m25p64) */ | |
481 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
482 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
483 | .bits_per_word = 8, | |
484 | }; | |
485 | #endif | |
486 | ||
a261eec0 MF |
487 | #if defined(CONFIG_BFIN_SPI_ADC) \ |
488 | || defined(CONFIG_BFIN_SPI_ADC_MODULE) | |
59003145 MH |
489 | /* SPI ADC chip */ |
490 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
491 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
492 | .bits_per_word = 16, | |
493 | }; | |
494 | #endif | |
495 | ||
496 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
497 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
498 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
499 | .enable_dma = 0, | |
500 | .bits_per_word = 16, | |
501 | }; | |
502 | #endif | |
503 | ||
504 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
505 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | |
506 | .enable_dma = 0, | |
507 | .bits_per_word = 16, | |
508 | }; | |
509 | #endif | |
510 | ||
ffdf3ec8 YL |
511 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
512 | static struct bfin5xx_spi_chip mmc_spi_chip_info = { | |
513 | .enable_dma = 0, | |
514 | .bits_per_word = 8, | |
515 | }; | |
516 | #endif | |
517 | ||
59003145 MH |
518 | #if defined(CONFIG_PBX) |
519 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
520 | .ctl_reg = 0x4, /* send zero */ | |
521 | .enable_dma = 0, | |
522 | .bits_per_word = 8, | |
523 | .cs_change_per_word = 1, | |
524 | }; | |
525 | #endif | |
526 | ||
59003145 MH |
527 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
528 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
529 | .enable_dma = 0, | |
530 | .bits_per_word = 16, | |
531 | }; | |
532 | ||
533 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
534 | .model = 7877, | |
535 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
536 | .x_plate_ohms = 419, | |
537 | .y_plate_ohms = 486, | |
538 | .pressure_max = 1000, | |
539 | .pressure_min = 0, | |
540 | .stopacq_polarity = 1, | |
541 | .first_conversion_delay = 3, | |
542 | .acquisition_time = 1, | |
543 | .averaging = 1, | |
544 | .pen_down_acc_interval = 1, | |
545 | }; | |
546 | #endif | |
547 | ||
5105432a MH |
548 | #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) |
549 | #include <linux/spi/ad7879.h> | |
550 | static const struct ad7879_platform_data bfin_ad7879_ts_info = { | |
551 | .model = 7879, /* Model = AD7879 */ | |
552 | .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ | |
553 | .pressure_max = 10000, | |
554 | .pressure_min = 0, | |
555 | .first_conversion_delay = 3, /* wait 512us before do a first conversion */ | |
556 | .acquisition_time = 1, /* 4us acquisition time per sample */ | |
557 | .median = 2, /* do 8 measurements */ | |
558 | .averaging = 1, /* take the average of 4 middle samples */ | |
559 | .pen_down_acc_interval = 255, /* 9.4 ms */ | |
560 | .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ | |
561 | .gpio_default = 1, /* During initialization set GPIO = HIGH */ | |
562 | }; | |
563 | #endif | |
564 | ||
565 | #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) | |
566 | static struct bfin5xx_spi_chip spi_ad7879_chip_info = { | |
567 | .enable_dma = 0, | |
568 | .bits_per_word = 16, | |
569 | }; | |
570 | #endif | |
571 | ||
c7d48966 | 572 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ |
0954f70a MH |
573 | && defined(CONFIG_SND_SOC_WM8731_SPI) |
574 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
575 | .enable_dma = 0, | |
576 | .bits_per_word = 16, | |
577 | }; | |
578 | #endif | |
6e668936 MH |
579 | |
580 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
581 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
582 | .enable_dma = 0, | |
583 | .bits_per_word = 8, | |
584 | }; | |
585 | #endif | |
586 | ||
59003145 MH |
587 | static struct spi_board_info bfin_spi_board_info[] __initdata = { |
588 | #if defined(CONFIG_MTD_M25P80) \ | |
589 | || defined(CONFIG_MTD_M25P80_MODULE) | |
590 | { | |
591 | /* the modalias must be the same as spi device driver name */ | |
592 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
593 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
594 | .bus_num = 0, /* Framework bus number */ | |
595 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
596 | .platform_data = &bfin_spi_flash_data, | |
597 | .controller_data = &spi_flash_chip_info, | |
598 | .mode = SPI_MODE_3, | |
599 | }, | |
600 | #endif | |
601 | ||
a261eec0 MF |
602 | #if defined(CONFIG_BFIN_SPI_ADC) \ |
603 | || defined(CONFIG_BFIN_SPI_ADC_MODULE) | |
59003145 MH |
604 | { |
605 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
606 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
607 | .bus_num = 0, /* Framework bus number */ | |
608 | .chip_select = 1, /* Framework chip select. */ | |
609 | .platform_data = NULL, /* No spi_driver specific config */ | |
610 | .controller_data = &spi_adc_chip_info, | |
611 | }, | |
612 | #endif | |
613 | ||
614 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
615 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
616 | { | |
617 | .modalias = "ad1836-spi", | |
618 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
619 | .bus_num = 0, | |
620 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
621 | .controller_data = &ad1836_spi_chip_info, | |
622 | }, | |
623 | #endif | |
624 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
625 | { | |
626 | .modalias = "ad9960-spi", | |
627 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | |
628 | .bus_num = 0, | |
629 | .chip_select = 1, | |
630 | .controller_data = &ad9960_spi_chip_info, | |
631 | }, | |
632 | #endif | |
ffdf3ec8 YL |
633 | #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) |
634 | { | |
635 | .modalias = "mmc_spi", | |
636 | .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ | |
637 | .bus_num = 0, | |
638 | .chip_select = 3, | |
639 | .controller_data = &mmc_spi_chip_info, | |
640 | .mode = SPI_MODE_0, | |
641 | }, | |
642 | #endif | |
643 | ||
59003145 MH |
644 | #if defined(CONFIG_PBX) |
645 | { | |
646 | .modalias = "fxs-spi", | |
647 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
648 | .bus_num = 0, | |
649 | .chip_select = 8 - CONFIG_J11_JUMPER, | |
650 | .controller_data = &spi_si3xxx_chip_info, | |
651 | .mode = SPI_MODE_3, | |
652 | }, | |
653 | { | |
654 | .modalias = "fxo-spi", | |
655 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
656 | .bus_num = 0, | |
657 | .chip_select = 8 - CONFIG_J19_JUMPER, | |
658 | .controller_data = &spi_si3xxx_chip_info, | |
659 | .mode = SPI_MODE_3, | |
660 | }, | |
661 | #endif | |
59003145 MH |
662 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
663 | { | |
664 | .modalias = "ad7877", | |
665 | .platform_data = &bfin_ad7877_ts_info, | |
2eb74ae2 | 666 | .irq = IRQ_PF8, |
59003145 | 667 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ |
0954f70a | 668 | .bus_num = 0, |
2eb74ae2 | 669 | .chip_select = 2, |
59003145 MH |
670 | .controller_data = &spi_ad7877_chip_info, |
671 | }, | |
672 | #endif | |
5105432a MH |
673 | #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) |
674 | { | |
675 | .modalias = "ad7879", | |
676 | .platform_data = &bfin_ad7879_ts_info, | |
677 | .irq = IRQ_PF8, | |
678 | .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ | |
679 | .bus_num = 0, | |
680 | .chip_select = 3, | |
681 | .controller_data = &spi_ad7879_chip_info, | |
682 | .mode = SPI_CPHA | SPI_CPOL, | |
683 | }, | |
684 | #endif | |
c7d48966 | 685 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ |
0954f70a MH |
686 | && defined(CONFIG_SND_SOC_WM8731_SPI) |
687 | { | |
688 | .modalias = "wm8731", | |
689 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
690 | .bus_num = 0, | |
691 | .chip_select = 5, | |
692 | .controller_data = &spi_wm8731_chip_info, | |
693 | .mode = SPI_MODE_0, | |
694 | }, | |
695 | #endif | |
6e668936 MH |
696 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
697 | { | |
698 | .modalias = "spidev", | |
699 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
700 | .bus_num = 0, | |
701 | .chip_select = 1, | |
702 | .controller_data = &spidev_chip_info, | |
703 | }, | |
704 | #endif | |
59003145 MH |
705 | }; |
706 | ||
5bda2723 | 707 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) |
59003145 MH |
708 | /* SPI controller data */ |
709 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
710 | .num_chipselect = 8, | |
711 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
5d448dd5 | 712 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, |
59003145 MH |
713 | }; |
714 | ||
715 | /* SPI (0) */ | |
716 | static struct resource bfin_spi0_resource[] = { | |
717 | [0] = { | |
718 | .start = SPI0_REGBASE, | |
719 | .end = SPI0_REGBASE + 0xFF, | |
720 | .flags = IORESOURCE_MEM, | |
721 | }, | |
722 | [1] = { | |
723 | .start = CH_SPI, | |
724 | .end = CH_SPI, | |
53122693 YL |
725 | .flags = IORESOURCE_DMA, |
726 | }, | |
727 | [2] = { | |
728 | .start = IRQ_SPI, | |
729 | .end = IRQ_SPI, | |
59003145 MH |
730 | .flags = IORESOURCE_IRQ, |
731 | }, | |
732 | }; | |
733 | ||
734 | static struct platform_device bfin_spi0_device = { | |
735 | .name = "bfin-spi", | |
736 | .id = 0, /* Bus number */ | |
737 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
738 | .resource = bfin_spi0_resource, | |
739 | .dev = { | |
740 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
741 | }, | |
742 | }; | |
743 | #endif /* spi master and devices */ | |
744 | ||
745 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
746 | static struct platform_device bfin_fb_device = { | |
747 | .name = "bf537-lq035", | |
748 | }; | |
749 | #endif | |
750 | ||
751 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
752 | static struct platform_device bfin_fb_adv7393_device = { | |
753 | .name = "bfin-adv7393", | |
754 | }; | |
755 | #endif | |
756 | ||
757 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
758 | static struct resource bfin_uart_resources[] = { | |
759 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
760 | { | |
761 | .start = 0xFFC00400, | |
762 | .end = 0xFFC004FF, | |
763 | .flags = IORESOURCE_MEM, | |
764 | }, | |
765 | #endif | |
766 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
767 | { | |
768 | .start = 0xFFC02000, | |
769 | .end = 0xFFC020FF, | |
770 | .flags = IORESOURCE_MEM, | |
771 | }, | |
772 | #endif | |
773 | }; | |
774 | ||
775 | static struct platform_device bfin_uart_device = { | |
776 | .name = "bfin-uart", | |
777 | .id = 1, | |
778 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
779 | .resource = bfin_uart_resources, | |
780 | }; | |
781 | #endif | |
782 | ||
5be36d22 | 783 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
5be36d22 | 784 | #ifdef CONFIG_BFIN_SIR0 |
42bd8bcb | 785 | static struct resource bfin_sir0_resources[] = { |
5be36d22 GY |
786 | { |
787 | .start = 0xFFC00400, | |
788 | .end = 0xFFC004FF, | |
789 | .flags = IORESOURCE_MEM, | |
790 | }, | |
42bd8bcb GY |
791 | { |
792 | .start = IRQ_UART0_RX, | |
793 | .end = IRQ_UART0_RX+1, | |
794 | .flags = IORESOURCE_IRQ, | |
795 | }, | |
796 | { | |
797 | .start = CH_UART0_RX, | |
798 | .end = CH_UART0_RX+1, | |
799 | .flags = IORESOURCE_DMA, | |
800 | }, | |
801 | }; | |
802 | ||
803 | static struct platform_device bfin_sir0_device = { | |
804 | .name = "bfin_sir", | |
805 | .id = 0, | |
806 | .num_resources = ARRAY_SIZE(bfin_sir0_resources), | |
807 | .resource = bfin_sir0_resources, | |
808 | }; | |
5be36d22 GY |
809 | #endif |
810 | #ifdef CONFIG_BFIN_SIR1 | |
42bd8bcb | 811 | static struct resource bfin_sir1_resources[] = { |
5be36d22 GY |
812 | { |
813 | .start = 0xFFC02000, | |
814 | .end = 0xFFC020FF, | |
815 | .flags = IORESOURCE_MEM, | |
816 | }, | |
42bd8bcb GY |
817 | { |
818 | .start = IRQ_UART1_RX, | |
819 | .end = IRQ_UART1_RX+1, | |
820 | .flags = IORESOURCE_IRQ, | |
821 | }, | |
822 | { | |
823 | .start = CH_UART1_RX, | |
824 | .end = CH_UART1_RX+1, | |
825 | .flags = IORESOURCE_DMA, | |
826 | }, | |
5be36d22 GY |
827 | }; |
828 | ||
42bd8bcb | 829 | static struct platform_device bfin_sir1_device = { |
5be36d22 | 830 | .name = "bfin_sir", |
42bd8bcb GY |
831 | .id = 1, |
832 | .num_resources = ARRAY_SIZE(bfin_sir1_resources), | |
833 | .resource = bfin_sir1_resources, | |
5be36d22 GY |
834 | }; |
835 | #endif | |
42bd8bcb | 836 | #endif |
5be36d22 | 837 | |
59003145 MH |
838 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
839 | static struct resource bfin_twi0_resource[] = { | |
840 | [0] = { | |
841 | .start = TWI0_REGBASE, | |
842 | .end = TWI0_REGBASE, | |
843 | .flags = IORESOURCE_MEM, | |
844 | }, | |
845 | [1] = { | |
846 | .start = IRQ_TWI, | |
847 | .end = IRQ_TWI, | |
848 | .flags = IORESOURCE_IRQ, | |
849 | }, | |
850 | }; | |
851 | ||
852 | static struct platform_device i2c_bfin_twi_device = { | |
853 | .name = "i2c-bfin-twi", | |
854 | .id = 0, | |
855 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
856 | .resource = bfin_twi0_resource, | |
857 | }; | |
858 | #endif | |
859 | ||
72268689 | 860 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { |
ebd58333 | 861 | #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) |
72268689 BW |
862 | { |
863 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
72268689 BW |
864 | }, |
865 | #endif | |
204844eb | 866 | #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) |
72268689 BW |
867 | { |
868 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
72268689 BW |
869 | .irq = IRQ_PF8, |
870 | }, | |
871 | #endif | |
872 | }; | |
72268689 | 873 | |
59003145 MH |
874 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) |
875 | static struct platform_device bfin_sport0_uart_device = { | |
876 | .name = "bfin-sport-uart", | |
877 | .id = 0, | |
878 | }; | |
879 | ||
880 | static struct platform_device bfin_sport1_uart_device = { | |
881 | .name = "bfin-sport-uart", | |
882 | .id = 1, | |
883 | }; | |
884 | #endif | |
885 | ||
1089e228 MH |
886 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
887 | #include <linux/input.h> | |
888 | #include <linux/gpio_keys.h> | |
889 | ||
890 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
891 | {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, | |
892 | {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, | |
893 | }; | |
894 | ||
895 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
896 | .buttons = bfin_gpio_keys_table, | |
897 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
898 | }; | |
899 | ||
900 | static struct platform_device bfin_device_gpiokeys = { | |
901 | .name = "gpio-keys", | |
902 | .dev = { | |
903 | .platform_data = &bfin_gpio_keys_data, | |
904 | }, | |
905 | }; | |
906 | #endif | |
907 | ||
aca5e4aa MH |
908 | #if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) |
909 | #include <linux/input.h> | |
910 | #include <asm/bfin_rotary.h> | |
911 | ||
912 | static struct bfin_rotary_platform_data bfin_rotary_data = { | |
913 | /*.rotary_up_key = KEY_UP,*/ | |
914 | /*.rotary_down_key = KEY_DOWN,*/ | |
915 | .rotary_rel_code = REL_WHEEL, | |
916 | .rotary_button_key = KEY_ENTER, | |
917 | .debounce = 10, /* 0..17 */ | |
918 | .mode = ROT_QUAD_ENC | ROT_DEBE, | |
919 | }; | |
920 | ||
921 | static struct resource bfin_rotary_resources[] = { | |
922 | { | |
923 | .start = IRQ_CNT, | |
924 | .end = IRQ_CNT, | |
925 | .flags = IORESOURCE_IRQ, | |
926 | }, | |
927 | }; | |
928 | ||
929 | static struct platform_device bfin_rotary_device = { | |
930 | .name = "bfin-rotary", | |
931 | .id = -1, | |
932 | .num_resources = ARRAY_SIZE(bfin_rotary_resources), | |
933 | .resource = bfin_rotary_resources, | |
934 | .dev = { | |
935 | .platform_data = &bfin_rotary_data, | |
936 | }, | |
937 | }; | |
938 | #endif | |
939 | ||
cad2ab65 MF |
940 | static struct resource bfin_gpios_resources = { |
941 | .start = 0, | |
942 | .end = MAX_BLACKFIN_GPIOS - 1, | |
943 | .flags = IORESOURCE_IRQ, | |
944 | }; | |
945 | ||
946 | static struct platform_device bfin_gpios_device = { | |
947 | .name = "simple-gpio", | |
948 | .id = -1, | |
949 | .num_resources = 1, | |
950 | .resource = &bfin_gpios_resources, | |
951 | }; | |
952 | ||
14b03204 MH |
953 | static const unsigned int cclk_vlev_datasheet[] = |
954 | { | |
955 | VRPAIR(VLEV_100, 400000000), | |
956 | VRPAIR(VLEV_105, 426000000), | |
957 | VRPAIR(VLEV_110, 500000000), | |
958 | VRPAIR(VLEV_115, 533000000), | |
959 | VRPAIR(VLEV_120, 600000000), | |
960 | }; | |
961 | ||
962 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
963 | .tuple_tab = cclk_vlev_datasheet, | |
964 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
965 | .vr_settling_time = 25 /* us */, | |
966 | }; | |
967 | ||
968 | static struct platform_device bfin_dpmc = { | |
969 | .name = "bfin dpmc", | |
970 | .dev = { | |
971 | .platform_data = &bfin_dmpc_vreg_data, | |
972 | }, | |
973 | }; | |
974 | ||
59003145 | 975 | static struct platform_device *stamp_devices[] __initdata = { |
14b03204 MH |
976 | |
977 | &bfin_dpmc, | |
978 | ||
64307f7d MH |
979 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) |
980 | &bf5xx_nand_device, | |
981 | #endif | |
982 | ||
59003145 MH |
983 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) |
984 | &bfin_pcmcia_cf_device, | |
985 | #endif | |
986 | ||
987 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
988 | &rtc_device, | |
989 | #endif | |
990 | ||
991 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
992 | &sl811_hcd_device, | |
993 | #endif | |
994 | ||
995 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
996 | &isp1362_hcd_device, | |
997 | #endif | |
998 | ||
3f375690 MH |
999 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
1000 | &bfin_isp1760_device, | |
1001 | #endif | |
1002 | ||
1089e228 MH |
1003 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
1004 | &musb_device, | |
1005 | #endif | |
1006 | ||
59003145 MH |
1007 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) |
1008 | &smc91x_device, | |
1009 | #endif | |
1010 | ||
1011 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
1012 | &dm9000_device, | |
1013 | #endif | |
1014 | ||
1015 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
65319628 | 1016 | &bfin_mii_bus, |
59003145 MH |
1017 | &bfin_mac_device, |
1018 | #endif | |
1019 | ||
1020 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
1021 | &net2272_bfin_device, | |
1022 | #endif | |
1023 | ||
1024 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
1025 | &bfin_spi0_device, | |
1026 | #endif | |
1027 | ||
1028 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
1029 | &bfin_fb_device, | |
1030 | #endif | |
1031 | ||
1089e228 MH |
1032 | #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) |
1033 | &bf52x_t350mcqb_device, | |
1034 | #endif | |
1035 | ||
59003145 MH |
1036 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) |
1037 | &bfin_fb_adv7393_device, | |
1038 | #endif | |
1039 | ||
1040 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
1041 | &bfin_uart_device, | |
1042 | #endif | |
1043 | ||
5be36d22 | 1044 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
42bd8bcb GY |
1045 | #ifdef CONFIG_BFIN_SIR0 |
1046 | &bfin_sir0_device, | |
1047 | #endif | |
1048 | #ifdef CONFIG_BFIN_SIR1 | |
1049 | &bfin_sir1_device, | |
1050 | #endif | |
5be36d22 GY |
1051 | #endif |
1052 | ||
59003145 MH |
1053 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
1054 | &i2c_bfin_twi_device, | |
1055 | #endif | |
1056 | ||
1057 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
1058 | &bfin_sport0_uart_device, | |
1059 | &bfin_sport1_uart_device, | |
1060 | #endif | |
1061 | ||
1089e228 MH |
1062 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
1063 | &bfin_device_gpiokeys, | |
1064 | #endif | |
cad2ab65 | 1065 | |
aca5e4aa MH |
1066 | #if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE) |
1067 | &bfin_rotary_device, | |
1068 | #endif | |
1069 | ||
d7e5dd41 MH |
1070 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
1071 | &ezkit_flash_device, | |
1072 | #endif | |
1073 | ||
cad2ab65 | 1074 | &bfin_gpios_device, |
59003145 MH |
1075 | }; |
1076 | ||
7f6678c5 | 1077 | static int __init ezkit_init(void) |
59003145 | 1078 | { |
b85d858b | 1079 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
72268689 BW |
1080 | i2c_register_board_info(0, bfin_i2c_board_info, |
1081 | ARRAY_SIZE(bfin_i2c_board_info)); | |
59003145 | 1082 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); |
5bda2723 | 1083 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); |
59003145 MH |
1084 | return 0; |
1085 | } | |
1086 | ||
7f6678c5 | 1087 | arch_initcall(ezkit_init); |
59003145 MH |
1088 | |
1089 | void native_machine_restart(char *cmd) | |
1090 | { | |
1091 | /* workaround reboot hang when booting from SPI */ | |
1092 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
b52dae31 | 1093 | bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); |
59003145 | 1094 | } |
137b1529 | 1095 | |
9862cc52 | 1096 | void bfin_get_ether_addr(char *addr) |
137b1529 | 1097 | { |
181afa94 MF |
1098 | /* the MAC is stored in OTP memory page 0xDF */ |
1099 | u32 ret; | |
1100 | u64 otp_mac; | |
1101 | u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; | |
1102 | ||
1103 | ret = otp_read(0xDF, 0x00, &otp_mac); | |
1104 | if (!(ret & 0x1)) { | |
1105 | char *otp_mac_p = (char *)&otp_mac; | |
1106 | for (ret = 0; ret < 6; ++ret) | |
1107 | addr[ret] = otp_mac_p[5 - ret]; | |
1108 | } | |
137b1529 | 1109 | } |
9862cc52 | 1110 | EXPORT_SYMBOL(bfin_get_ether_addr); |