Commit | Line | Data |
---|---|---|
59003145 MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/ezkit.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
a628a8bc | 11 | * Copyright 2004-2008 Analog Devices Inc. |
59003145 MH |
12 | * |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
d7e5dd41 | 35 | #include <linux/mtd/physmap.h> |
59003145 MH |
36 | #include <linux/spi/spi.h> |
37 | #include <linux/spi/flash.h> | |
38 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
f02bcec5 | 39 | #include <linux/usb/isp1362.h> |
59003145 | 40 | #endif |
0a87e3e9 | 41 | #include <linux/ata_platform.h> |
72268689 | 42 | #include <linux/i2c.h> |
59003145 MH |
43 | #include <linux/irq.h> |
44 | #include <linux/interrupt.h> | |
632f658b | 45 | #include <linux/usb/sl811.h> |
67f2d33e | 46 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
1089e228 | 47 | #include <linux/usb/musb.h> |
67f2d33e | 48 | #endif |
64307f7d | 49 | #include <asm/cplb.h> |
59003145 MH |
50 | #include <asm/dma.h> |
51 | #include <asm/bfin5xx_spi.h> | |
52 | #include <asm/reboot.h> | |
64307f7d | 53 | #include <asm/nand.h> |
5d448dd5 | 54 | #include <asm/portmux.h> |
14b03204 | 55 | #include <asm/dpmc.h> |
59003145 MH |
56 | #include <linux/spi/ad7877.h> |
57 | ||
58 | /* | |
59 | * Name the Board for the /proc/cpuinfo | |
60 | */ | |
066954a3 | 61 | const char bfin_board_name[] = "ADDS-BF527-EZKIT"; |
59003145 MH |
62 | |
63 | /* | |
64 | * Driver needs to know address, irq and flag pin. | |
65 | */ | |
66 | ||
67 | #define ISP1761_BASE 0x203C0000 | |
68 | #define ISP1761_IRQ IRQ_PF7 | |
69 | ||
70 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) | |
71 | static struct resource bfin_isp1761_resources[] = { | |
72 | [0] = { | |
73 | .name = "isp1761-regs", | |
74 | .start = ISP1761_BASE + 0x00000000, | |
75 | .end = ISP1761_BASE + 0x000fffff, | |
76 | .flags = IORESOURCE_MEM, | |
77 | }, | |
78 | [1] = { | |
79 | .start = ISP1761_IRQ, | |
80 | .end = ISP1761_IRQ, | |
81 | .flags = IORESOURCE_IRQ, | |
82 | }, | |
83 | }; | |
84 | ||
85 | static struct platform_device bfin_isp1761_device = { | |
86 | .name = "isp1761", | |
87 | .id = 0, | |
88 | .num_resources = ARRAY_SIZE(bfin_isp1761_resources), | |
89 | .resource = bfin_isp1761_resources, | |
90 | }; | |
91 | ||
92 | static struct platform_device *bfin_isp1761_devices[] = { | |
93 | &bfin_isp1761_device, | |
94 | }; | |
95 | ||
96 | int __init bfin_isp1761_init(void) | |
97 | { | |
98 | unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); | |
99 | ||
b85d858b | 100 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
59003145 MH |
101 | set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); |
102 | ||
103 | return platform_add_devices(bfin_isp1761_devices, num_devices); | |
104 | } | |
105 | ||
106 | void __exit bfin_isp1761_exit(void) | |
107 | { | |
108 | platform_device_unregister(&bfin_isp1761_device); | |
109 | } | |
110 | ||
111 | arch_initcall(bfin_isp1761_init); | |
112 | #endif | |
113 | ||
1089e228 MH |
114 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
115 | static struct resource musb_resources[] = { | |
116 | [0] = { | |
117 | .start = 0xffc03800, | |
118 | .end = 0xffc03cff, | |
119 | .flags = IORESOURCE_MEM, | |
120 | }, | |
121 | [1] = { /* general IRQ */ | |
122 | .start = IRQ_USB_INT0, | |
123 | .end = IRQ_USB_INT0, | |
124 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
125 | }, | |
126 | [2] = { /* DMA IRQ */ | |
127 | .start = IRQ_USB_DMA, | |
128 | .end = IRQ_USB_DMA, | |
129 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
130 | }, | |
131 | }; | |
132 | ||
133 | static struct musb_hdrc_platform_data musb_plat = { | |
134 | #if defined(CONFIG_USB_MUSB_OTG) | |
135 | .mode = MUSB_OTG, | |
136 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
137 | .mode = MUSB_HOST, | |
138 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
139 | .mode = MUSB_PERIPHERAL, | |
140 | #endif | |
141 | .multipoint = 0, | |
142 | }; | |
143 | ||
144 | static u64 musb_dmamask = ~(u32)0; | |
145 | ||
146 | static struct platform_device musb_device = { | |
147 | .name = "musb_hdrc", | |
148 | .id = 0, | |
149 | .dev = { | |
150 | .dma_mask = &musb_dmamask, | |
151 | .coherent_dma_mask = 0xffffffff, | |
152 | .platform_data = &musb_plat, | |
153 | }, | |
154 | .num_resources = ARRAY_SIZE(musb_resources), | |
155 | .resource = musb_resources, | |
156 | }; | |
157 | #endif | |
158 | ||
159 | #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) | |
160 | ||
161 | static struct resource bf52x_t350mcqb_resources[] = { | |
162 | { | |
163 | .start = IRQ_PPI_ERROR, | |
164 | .end = IRQ_PPI_ERROR, | |
165 | .flags = IORESOURCE_IRQ, | |
166 | }, | |
167 | }; | |
168 | ||
169 | static struct platform_device bf52x_t350mcqb_device = { | |
170 | .name = "bfin-t350mcqb", | |
171 | .id = -1, | |
172 | .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources), | |
173 | .resource = bf52x_t350mcqb_resources, | |
174 | }; | |
175 | #endif | |
176 | ||
d7e5dd41 MH |
177 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
178 | static struct mtd_partition ezkit_partitions[] = { | |
179 | { | |
180 | .name = "Bootloader", | |
181 | .size = 0x40000, | |
182 | .offset = 0, | |
183 | }, { | |
184 | .name = "Kernel", | |
185 | .size = 0x1C0000, | |
186 | .offset = MTDPART_OFS_APPEND, | |
187 | }, { | |
188 | .name = "RootFS", | |
189 | .size = MTDPART_SIZ_FULL, | |
190 | .offset = MTDPART_OFS_APPEND, | |
191 | } | |
192 | }; | |
193 | ||
194 | static struct physmap_flash_data ezkit_flash_data = { | |
195 | .width = 2, | |
196 | .parts = ezkit_partitions, | |
197 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
198 | }; | |
199 | ||
200 | static struct resource ezkit_flash_resource = { | |
201 | .start = 0x20000000, | |
202 | .end = 0x203fffff, | |
203 | .flags = IORESOURCE_MEM, | |
204 | }; | |
205 | ||
206 | static struct platform_device ezkit_flash_device = { | |
207 | .name = "physmap-flash", | |
208 | .id = 0, | |
209 | .dev = { | |
210 | .platform_data = &ezkit_flash_data, | |
211 | }, | |
212 | .num_resources = 1, | |
213 | .resource = &ezkit_flash_resource, | |
214 | }; | |
215 | #endif | |
216 | ||
64307f7d MH |
217 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) |
218 | static struct mtd_partition partition_info[] = { | |
219 | { | |
220 | .name = "Linux Kernel", | |
221 | .offset = 0, | |
222 | .size = 4 * SIZE_1M, | |
223 | }, | |
224 | { | |
225 | .name = "File System", | |
edf05641 MF |
226 | .offset = MTDPART_OFS_APPEND, |
227 | .size = MTDPART_SIZ_FULL, | |
64307f7d MH |
228 | }, |
229 | }; | |
230 | ||
231 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
232 | .page_size = NFC_PG_SIZE_256, | |
233 | .data_width = NFC_NWIDTH_8, | |
234 | .partitions = partition_info, | |
235 | .nr_partitions = ARRAY_SIZE(partition_info), | |
236 | .rd_dly = 3, | |
237 | .wr_dly = 3, | |
238 | }; | |
239 | ||
240 | static struct resource bf5xx_nand_resources[] = { | |
241 | { | |
242 | .start = NFC_CTL, | |
243 | .end = NFC_DATA_RD + 2, | |
244 | .flags = IORESOURCE_MEM, | |
245 | }, | |
246 | { | |
247 | .start = CH_NFC, | |
248 | .end = CH_NFC, | |
249 | .flags = IORESOURCE_IRQ, | |
250 | }, | |
251 | }; | |
252 | ||
253 | static struct platform_device bf5xx_nand_device = { | |
254 | .name = "bf5xx-nand", | |
255 | .id = 0, | |
256 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
257 | .resource = bf5xx_nand_resources, | |
258 | .dev = { | |
259 | .platform_data = &bf5xx_nand_platform, | |
260 | }, | |
261 | }; | |
262 | #endif | |
263 | ||
59003145 MH |
264 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) |
265 | static struct resource bfin_pcmcia_cf_resources[] = { | |
266 | { | |
267 | .start = 0x20310000, /* IO PORT */ | |
268 | .end = 0x20312000, | |
269 | .flags = IORESOURCE_MEM, | |
270 | }, { | |
271 | .start = 0x20311000, /* Attribute Memory */ | |
272 | .end = 0x20311FFF, | |
273 | .flags = IORESOURCE_MEM, | |
274 | }, { | |
275 | .start = IRQ_PF4, | |
276 | .end = IRQ_PF4, | |
277 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
278 | }, { | |
279 | .start = 6, /* Card Detect PF6 */ | |
280 | .end = 6, | |
281 | .flags = IORESOURCE_IRQ, | |
282 | }, | |
283 | }; | |
284 | ||
285 | static struct platform_device bfin_pcmcia_cf_device = { | |
286 | .name = "bfin_cf_pcmcia", | |
287 | .id = -1, | |
288 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
289 | .resource = bfin_pcmcia_cf_resources, | |
290 | }; | |
291 | #endif | |
292 | ||
293 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
294 | static struct platform_device rtc_device = { | |
295 | .name = "rtc-bfin", | |
296 | .id = -1, | |
297 | }; | |
298 | #endif | |
299 | ||
300 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
301 | static struct resource smc91x_resources[] = { | |
302 | { | |
303 | .name = "smc91x-regs", | |
304 | .start = 0x20300300, | |
305 | .end = 0x20300300 + 16, | |
306 | .flags = IORESOURCE_MEM, | |
307 | }, { | |
308 | ||
309 | .start = IRQ_PF7, | |
310 | .end = IRQ_PF7, | |
311 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
312 | }, | |
313 | }; | |
314 | static struct platform_device smc91x_device = { | |
315 | .name = "smc91x", | |
316 | .id = 0, | |
317 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
318 | .resource = smc91x_resources, | |
319 | }; | |
320 | #endif | |
321 | ||
322 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
323 | static struct resource dm9000_resources[] = { | |
324 | [0] = { | |
325 | .start = 0x203FB800, | |
da3854fc | 326 | .end = 0x203FB800 + 1, |
59003145 MH |
327 | .flags = IORESOURCE_MEM, |
328 | }, | |
329 | [1] = { | |
da3854fc LP |
330 | .start = 0x203FB800 + 4, |
331 | .end = 0x203FB800 + 5, | |
332 | .flags = IORESOURCE_MEM, | |
333 | }, | |
334 | [2] = { | |
59003145 MH |
335 | .start = IRQ_PF9, |
336 | .end = IRQ_PF9, | |
337 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), | |
338 | }, | |
339 | }; | |
340 | ||
341 | static struct platform_device dm9000_device = { | |
342 | .name = "dm9000", | |
343 | .id = -1, | |
344 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
345 | .resource = dm9000_resources, | |
346 | }; | |
347 | #endif | |
348 | ||
349 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
350 | static struct resource sl811_hcd_resources[] = { | |
351 | { | |
352 | .start = 0x20340000, | |
353 | .end = 0x20340000, | |
354 | .flags = IORESOURCE_MEM, | |
355 | }, { | |
356 | .start = 0x20340004, | |
357 | .end = 0x20340004, | |
358 | .flags = IORESOURCE_MEM, | |
359 | }, { | |
360 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
361 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
362 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
363 | }, | |
364 | }; | |
365 | ||
366 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
367 | void sl811_port_power(struct device *dev, int is_on) | |
368 | { | |
369 | gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); | |
acbcd263 | 370 | gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); |
59003145 MH |
371 | } |
372 | #endif | |
373 | ||
374 | static struct sl811_platform_data sl811_priv = { | |
375 | .potpg = 10, | |
376 | .power = 250, /* == 500mA */ | |
377 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
378 | .port_power = &sl811_port_power, | |
379 | #endif | |
380 | }; | |
381 | ||
382 | static struct platform_device sl811_hcd_device = { | |
383 | .name = "sl811-hcd", | |
384 | .id = 0, | |
385 | .dev = { | |
386 | .platform_data = &sl811_priv, | |
387 | }, | |
388 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
389 | .resource = sl811_hcd_resources, | |
390 | }; | |
391 | #endif | |
392 | ||
393 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
394 | static struct resource isp1362_hcd_resources[] = { | |
395 | { | |
396 | .start = 0x20360000, | |
397 | .end = 0x20360000, | |
398 | .flags = IORESOURCE_MEM, | |
399 | }, { | |
400 | .start = 0x20360004, | |
401 | .end = 0x20360004, | |
402 | .flags = IORESOURCE_MEM, | |
403 | }, { | |
404 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
405 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
406 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
407 | }, | |
408 | }; | |
409 | ||
410 | static struct isp1362_platform_data isp1362_priv = { | |
411 | .sel15Kres = 1, | |
412 | .clknotstop = 0, | |
413 | .oc_enable = 0, | |
414 | .int_act_high = 0, | |
415 | .int_edge_triggered = 0, | |
416 | .remote_wakeup_connected = 0, | |
417 | .no_power_switching = 1, | |
418 | .power_switching_mode = 0, | |
419 | }; | |
420 | ||
421 | static struct platform_device isp1362_hcd_device = { | |
422 | .name = "isp1362-hcd", | |
423 | .id = 0, | |
424 | .dev = { | |
425 | .platform_data = &isp1362_priv, | |
426 | }, | |
427 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
428 | .resource = isp1362_hcd_resources, | |
429 | }; | |
430 | #endif | |
431 | ||
432 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
433 | static struct platform_device bfin_mac_device = { | |
434 | .name = "bfin_mac", | |
435 | }; | |
436 | #endif | |
437 | ||
438 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
439 | static struct resource net2272_bfin_resources[] = { | |
440 | { | |
441 | .start = 0x20300000, | |
442 | .end = 0x20300000 + 0x100, | |
443 | .flags = IORESOURCE_MEM, | |
444 | }, { | |
445 | .start = IRQ_PF7, | |
446 | .end = IRQ_PF7, | |
447 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
448 | }, | |
449 | }; | |
450 | ||
451 | static struct platform_device net2272_bfin_device = { | |
452 | .name = "net2272", | |
453 | .id = -1, | |
454 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
455 | .resource = net2272_bfin_resources, | |
456 | }; | |
457 | #endif | |
458 | ||
59003145 MH |
459 | #if defined(CONFIG_MTD_M25P80) \ |
460 | || defined(CONFIG_MTD_M25P80_MODULE) | |
461 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
462 | { | |
463 | .name = "bootloader", | |
ac76d889 | 464 | .size = 0x00040000, |
59003145 MH |
465 | .offset = 0, |
466 | .mask_flags = MTD_CAP_ROM | |
467 | }, { | |
d7323696 | 468 | .name = "linux kernel", |
edf05641 MF |
469 | .size = MTDPART_SIZ_FULL, |
470 | .offset = MTDPART_OFS_APPEND, | |
59003145 MH |
471 | } |
472 | }; | |
473 | ||
474 | static struct flash_platform_data bfin_spi_flash_data = { | |
475 | .name = "m25p80", | |
476 | .parts = bfin_spi_flash_partitions, | |
477 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
b9c9e788 | 478 | .type = "m25p16", |
59003145 MH |
479 | }; |
480 | ||
481 | /* SPI flash chip (m25p64) */ | |
482 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
483 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
484 | .bits_per_word = 8, | |
485 | }; | |
486 | #endif | |
487 | ||
488 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
489 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
490 | /* SPI ADC chip */ | |
491 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
492 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
493 | .bits_per_word = 16, | |
494 | }; | |
495 | #endif | |
496 | ||
497 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
498 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
499 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
500 | .enable_dma = 0, | |
501 | .bits_per_word = 16, | |
502 | }; | |
503 | #endif | |
504 | ||
505 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
506 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | |
507 | .enable_dma = 0, | |
508 | .bits_per_word = 16, | |
509 | }; | |
510 | #endif | |
511 | ||
512 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
513 | static struct bfin5xx_spi_chip spi_mmc_chip_info = { | |
514 | .enable_dma = 1, | |
515 | .bits_per_word = 8, | |
516 | }; | |
517 | #endif | |
518 | ||
519 | #if defined(CONFIG_PBX) | |
520 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
521 | .ctl_reg = 0x4, /* send zero */ | |
522 | .enable_dma = 0, | |
523 | .bits_per_word = 8, | |
524 | .cs_change_per_word = 1, | |
525 | }; | |
526 | #endif | |
527 | ||
59003145 MH |
528 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
529 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
530 | .enable_dma = 0, | |
531 | .bits_per_word = 16, | |
532 | }; | |
533 | ||
534 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
535 | .model = 7877, | |
536 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
537 | .x_plate_ohms = 419, | |
538 | .y_plate_ohms = 486, | |
539 | .pressure_max = 1000, | |
540 | .pressure_min = 0, | |
541 | .stopacq_polarity = 1, | |
542 | .first_conversion_delay = 3, | |
543 | .acquisition_time = 1, | |
544 | .averaging = 1, | |
545 | .pen_down_acc_interval = 1, | |
546 | }; | |
547 | #endif | |
548 | ||
c7d48966 | 549 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ |
0954f70a MH |
550 | && defined(CONFIG_SND_SOC_WM8731_SPI) |
551 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
552 | .enable_dma = 0, | |
553 | .bits_per_word = 16, | |
554 | }; | |
555 | #endif | |
6e668936 MH |
556 | |
557 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
558 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
559 | .enable_dma = 0, | |
560 | .bits_per_word = 8, | |
561 | }; | |
562 | #endif | |
563 | ||
59003145 MH |
564 | static struct spi_board_info bfin_spi_board_info[] __initdata = { |
565 | #if defined(CONFIG_MTD_M25P80) \ | |
566 | || defined(CONFIG_MTD_M25P80_MODULE) | |
567 | { | |
568 | /* the modalias must be the same as spi device driver name */ | |
569 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
570 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
571 | .bus_num = 0, /* Framework bus number */ | |
572 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
573 | .platform_data = &bfin_spi_flash_data, | |
574 | .controller_data = &spi_flash_chip_info, | |
575 | .mode = SPI_MODE_3, | |
576 | }, | |
577 | #endif | |
578 | ||
579 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
580 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
581 | { | |
582 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
583 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
584 | .bus_num = 0, /* Framework bus number */ | |
585 | .chip_select = 1, /* Framework chip select. */ | |
586 | .platform_data = NULL, /* No spi_driver specific config */ | |
587 | .controller_data = &spi_adc_chip_info, | |
588 | }, | |
589 | #endif | |
590 | ||
591 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
592 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
593 | { | |
594 | .modalias = "ad1836-spi", | |
595 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
596 | .bus_num = 0, | |
597 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
598 | .controller_data = &ad1836_spi_chip_info, | |
599 | }, | |
600 | #endif | |
601 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
602 | { | |
603 | .modalias = "ad9960-spi", | |
604 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | |
605 | .bus_num = 0, | |
606 | .chip_select = 1, | |
607 | .controller_data = &ad9960_spi_chip_info, | |
608 | }, | |
609 | #endif | |
610 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
611 | { | |
612 | .modalias = "spi_mmc_dummy", | |
613 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
614 | .bus_num = 0, | |
615 | .chip_select = 0, | |
616 | .platform_data = NULL, | |
617 | .controller_data = &spi_mmc_chip_info, | |
618 | .mode = SPI_MODE_3, | |
619 | }, | |
620 | { | |
621 | .modalias = "spi_mmc", | |
622 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
623 | .bus_num = 0, | |
624 | .chip_select = CONFIG_SPI_MMC_CS_CHAN, | |
625 | .platform_data = NULL, | |
626 | .controller_data = &spi_mmc_chip_info, | |
627 | .mode = SPI_MODE_3, | |
628 | }, | |
629 | #endif | |
630 | #if defined(CONFIG_PBX) | |
631 | { | |
632 | .modalias = "fxs-spi", | |
633 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
634 | .bus_num = 0, | |
635 | .chip_select = 8 - CONFIG_J11_JUMPER, | |
636 | .controller_data = &spi_si3xxx_chip_info, | |
637 | .mode = SPI_MODE_3, | |
638 | }, | |
639 | { | |
640 | .modalias = "fxo-spi", | |
641 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
642 | .bus_num = 0, | |
643 | .chip_select = 8 - CONFIG_J19_JUMPER, | |
644 | .controller_data = &spi_si3xxx_chip_info, | |
645 | .mode = SPI_MODE_3, | |
646 | }, | |
647 | #endif | |
59003145 MH |
648 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
649 | { | |
650 | .modalias = "ad7877", | |
651 | .platform_data = &bfin_ad7877_ts_info, | |
2eb74ae2 | 652 | .irq = IRQ_PF8, |
59003145 | 653 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ |
0954f70a | 654 | .bus_num = 0, |
2eb74ae2 | 655 | .chip_select = 2, |
59003145 MH |
656 | .controller_data = &spi_ad7877_chip_info, |
657 | }, | |
658 | #endif | |
c7d48966 | 659 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ |
0954f70a MH |
660 | && defined(CONFIG_SND_SOC_WM8731_SPI) |
661 | { | |
662 | .modalias = "wm8731", | |
663 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
664 | .bus_num = 0, | |
665 | .chip_select = 5, | |
666 | .controller_data = &spi_wm8731_chip_info, | |
667 | .mode = SPI_MODE_0, | |
668 | }, | |
669 | #endif | |
6e668936 MH |
670 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
671 | { | |
672 | .modalias = "spidev", | |
673 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
674 | .bus_num = 0, | |
675 | .chip_select = 1, | |
676 | .controller_data = &spidev_chip_info, | |
677 | }, | |
678 | #endif | |
59003145 MH |
679 | }; |
680 | ||
5bda2723 | 681 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) |
59003145 MH |
682 | /* SPI controller data */ |
683 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
684 | .num_chipselect = 8, | |
685 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
5d448dd5 | 686 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, |
59003145 MH |
687 | }; |
688 | ||
689 | /* SPI (0) */ | |
690 | static struct resource bfin_spi0_resource[] = { | |
691 | [0] = { | |
692 | .start = SPI0_REGBASE, | |
693 | .end = SPI0_REGBASE + 0xFF, | |
694 | .flags = IORESOURCE_MEM, | |
695 | }, | |
696 | [1] = { | |
697 | .start = CH_SPI, | |
698 | .end = CH_SPI, | |
699 | .flags = IORESOURCE_IRQ, | |
700 | }, | |
701 | }; | |
702 | ||
703 | static struct platform_device bfin_spi0_device = { | |
704 | .name = "bfin-spi", | |
705 | .id = 0, /* Bus number */ | |
706 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
707 | .resource = bfin_spi0_resource, | |
708 | .dev = { | |
709 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
710 | }, | |
711 | }; | |
712 | #endif /* spi master and devices */ | |
713 | ||
714 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
715 | static struct platform_device bfin_fb_device = { | |
716 | .name = "bf537-lq035", | |
717 | }; | |
718 | #endif | |
719 | ||
720 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
721 | static struct platform_device bfin_fb_adv7393_device = { | |
722 | .name = "bfin-adv7393", | |
723 | }; | |
724 | #endif | |
725 | ||
726 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
727 | static struct resource bfin_uart_resources[] = { | |
728 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
729 | { | |
730 | .start = 0xFFC00400, | |
731 | .end = 0xFFC004FF, | |
732 | .flags = IORESOURCE_MEM, | |
733 | }, | |
734 | #endif | |
735 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
736 | { | |
737 | .start = 0xFFC02000, | |
738 | .end = 0xFFC020FF, | |
739 | .flags = IORESOURCE_MEM, | |
740 | }, | |
741 | #endif | |
742 | }; | |
743 | ||
744 | static struct platform_device bfin_uart_device = { | |
745 | .name = "bfin-uart", | |
746 | .id = 1, | |
747 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
748 | .resource = bfin_uart_resources, | |
749 | }; | |
750 | #endif | |
751 | ||
5be36d22 GY |
752 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
753 | static struct resource bfin_sir_resources[] = { | |
754 | #ifdef CONFIG_BFIN_SIR0 | |
755 | { | |
756 | .start = 0xFFC00400, | |
757 | .end = 0xFFC004FF, | |
758 | .flags = IORESOURCE_MEM, | |
759 | }, | |
760 | #endif | |
761 | #ifdef CONFIG_BFIN_SIR1 | |
762 | { | |
763 | .start = 0xFFC02000, | |
764 | .end = 0xFFC020FF, | |
765 | .flags = IORESOURCE_MEM, | |
766 | }, | |
767 | #endif | |
768 | }; | |
769 | ||
770 | static struct platform_device bfin_sir_device = { | |
771 | .name = "bfin_sir", | |
772 | .id = 0, | |
773 | .num_resources = ARRAY_SIZE(bfin_sir_resources), | |
774 | .resource = bfin_sir_resources, | |
775 | }; | |
776 | #endif | |
777 | ||
59003145 MH |
778 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
779 | static struct resource bfin_twi0_resource[] = { | |
780 | [0] = { | |
781 | .start = TWI0_REGBASE, | |
782 | .end = TWI0_REGBASE, | |
783 | .flags = IORESOURCE_MEM, | |
784 | }, | |
785 | [1] = { | |
786 | .start = IRQ_TWI, | |
787 | .end = IRQ_TWI, | |
788 | .flags = IORESOURCE_IRQ, | |
789 | }, | |
790 | }; | |
791 | ||
792 | static struct platform_device i2c_bfin_twi_device = { | |
793 | .name = "i2c-bfin-twi", | |
794 | .id = 0, | |
795 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
796 | .resource = bfin_twi0_resource, | |
797 | }; | |
798 | #endif | |
799 | ||
72268689 BW |
800 | #ifdef CONFIG_I2C_BOARDINFO |
801 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { | |
802 | #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) | |
803 | { | |
804 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
72268689 BW |
805 | }, |
806 | #endif | |
807 | #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) | |
808 | { | |
809 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
72268689 BW |
810 | .irq = IRQ_PF8, |
811 | }, | |
812 | #endif | |
813 | }; | |
814 | #endif | |
815 | ||
59003145 MH |
816 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) |
817 | static struct platform_device bfin_sport0_uart_device = { | |
818 | .name = "bfin-sport-uart", | |
819 | .id = 0, | |
820 | }; | |
821 | ||
822 | static struct platform_device bfin_sport1_uart_device = { | |
823 | .name = "bfin-sport-uart", | |
824 | .id = 1, | |
825 | }; | |
826 | #endif | |
827 | ||
828 | #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) | |
829 | #define PATA_INT 55 | |
830 | ||
831 | static struct pata_platform_info bfin_pata_platform_data = { | |
832 | .ioport_shift = 1, | |
833 | .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, | |
834 | }; | |
835 | ||
836 | static struct resource bfin_pata_resources[] = { | |
837 | { | |
838 | .start = 0x20314020, | |
839 | .end = 0x2031403F, | |
840 | .flags = IORESOURCE_MEM, | |
841 | }, | |
842 | { | |
843 | .start = 0x2031401C, | |
844 | .end = 0x2031401F, | |
845 | .flags = IORESOURCE_MEM, | |
846 | }, | |
847 | { | |
848 | .start = PATA_INT, | |
849 | .end = PATA_INT, | |
850 | .flags = IORESOURCE_IRQ, | |
851 | }, | |
852 | }; | |
853 | ||
854 | static struct platform_device bfin_pata_device = { | |
855 | .name = "pata_platform", | |
856 | .id = -1, | |
857 | .num_resources = ARRAY_SIZE(bfin_pata_resources), | |
858 | .resource = bfin_pata_resources, | |
859 | .dev = { | |
860 | .platform_data = &bfin_pata_platform_data, | |
861 | } | |
862 | }; | |
863 | #endif | |
864 | ||
1089e228 MH |
865 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
866 | #include <linux/input.h> | |
867 | #include <linux/gpio_keys.h> | |
868 | ||
869 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
870 | {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, | |
871 | {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, | |
872 | }; | |
873 | ||
874 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
875 | .buttons = bfin_gpio_keys_table, | |
876 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
877 | }; | |
878 | ||
879 | static struct platform_device bfin_device_gpiokeys = { | |
880 | .name = "gpio-keys", | |
881 | .dev = { | |
882 | .platform_data = &bfin_gpio_keys_data, | |
883 | }, | |
884 | }; | |
885 | #endif | |
886 | ||
cad2ab65 MF |
887 | static struct resource bfin_gpios_resources = { |
888 | .start = 0, | |
889 | .end = MAX_BLACKFIN_GPIOS - 1, | |
890 | .flags = IORESOURCE_IRQ, | |
891 | }; | |
892 | ||
893 | static struct platform_device bfin_gpios_device = { | |
894 | .name = "simple-gpio", | |
895 | .id = -1, | |
896 | .num_resources = 1, | |
897 | .resource = &bfin_gpios_resources, | |
898 | }; | |
899 | ||
14b03204 MH |
900 | static const unsigned int cclk_vlev_datasheet[] = |
901 | { | |
902 | VRPAIR(VLEV_100, 400000000), | |
903 | VRPAIR(VLEV_105, 426000000), | |
904 | VRPAIR(VLEV_110, 500000000), | |
905 | VRPAIR(VLEV_115, 533000000), | |
906 | VRPAIR(VLEV_120, 600000000), | |
907 | }; | |
908 | ||
909 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
910 | .tuple_tab = cclk_vlev_datasheet, | |
911 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
912 | .vr_settling_time = 25 /* us */, | |
913 | }; | |
914 | ||
915 | static struct platform_device bfin_dpmc = { | |
916 | .name = "bfin dpmc", | |
917 | .dev = { | |
918 | .platform_data = &bfin_dmpc_vreg_data, | |
919 | }, | |
920 | }; | |
921 | ||
59003145 | 922 | static struct platform_device *stamp_devices[] __initdata = { |
14b03204 MH |
923 | |
924 | &bfin_dpmc, | |
925 | ||
64307f7d MH |
926 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) |
927 | &bf5xx_nand_device, | |
928 | #endif | |
929 | ||
59003145 MH |
930 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) |
931 | &bfin_pcmcia_cf_device, | |
932 | #endif | |
933 | ||
934 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
935 | &rtc_device, | |
936 | #endif | |
937 | ||
938 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
939 | &sl811_hcd_device, | |
940 | #endif | |
941 | ||
942 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
943 | &isp1362_hcd_device, | |
944 | #endif | |
945 | ||
1089e228 MH |
946 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
947 | &musb_device, | |
948 | #endif | |
949 | ||
59003145 MH |
950 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) |
951 | &smc91x_device, | |
952 | #endif | |
953 | ||
954 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
955 | &dm9000_device, | |
956 | #endif | |
957 | ||
958 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
959 | &bfin_mac_device, | |
960 | #endif | |
961 | ||
962 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
963 | &net2272_bfin_device, | |
964 | #endif | |
965 | ||
966 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
967 | &bfin_spi0_device, | |
968 | #endif | |
969 | ||
970 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
971 | &bfin_fb_device, | |
972 | #endif | |
973 | ||
1089e228 MH |
974 | #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) |
975 | &bf52x_t350mcqb_device, | |
976 | #endif | |
977 | ||
59003145 MH |
978 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) |
979 | &bfin_fb_adv7393_device, | |
980 | #endif | |
981 | ||
982 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
983 | &bfin_uart_device, | |
984 | #endif | |
985 | ||
5be36d22 GY |
986 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
987 | &bfin_sir_device, | |
988 | #endif | |
989 | ||
59003145 MH |
990 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
991 | &i2c_bfin_twi_device, | |
992 | #endif | |
993 | ||
994 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
995 | &bfin_sport0_uart_device, | |
996 | &bfin_sport1_uart_device, | |
997 | #endif | |
998 | ||
999 | #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) | |
1000 | &bfin_pata_device, | |
1001 | #endif | |
1089e228 MH |
1002 | |
1003 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
1004 | &bfin_device_gpiokeys, | |
1005 | #endif | |
cad2ab65 | 1006 | |
d7e5dd41 MH |
1007 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
1008 | &ezkit_flash_device, | |
1009 | #endif | |
1010 | ||
cad2ab65 | 1011 | &bfin_gpios_device, |
59003145 MH |
1012 | }; |
1013 | ||
1014 | static int __init stamp_init(void) | |
1015 | { | |
b85d858b | 1016 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
72268689 BW |
1017 | |
1018 | #ifdef CONFIG_I2C_BOARDINFO | |
1019 | i2c_register_board_info(0, bfin_i2c_board_info, | |
1020 | ARRAY_SIZE(bfin_i2c_board_info)); | |
1021 | #endif | |
1022 | ||
59003145 | 1023 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); |
5bda2723 | 1024 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); |
59003145 MH |
1025 | |
1026 | #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) | |
1027 | irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; | |
1028 | #endif | |
1029 | return 0; | |
1030 | } | |
1031 | ||
1032 | arch_initcall(stamp_init); | |
1033 | ||
1034 | void native_machine_restart(char *cmd) | |
1035 | { | |
1036 | /* workaround reboot hang when booting from SPI */ | |
1037 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
1038 | bfin_gpio_reset_spi0_ssel1(); | |
1039 | } | |
137b1529 | 1040 | |
9862cc52 | 1041 | void bfin_get_ether_addr(char *addr) |
137b1529 | 1042 | { |
181afa94 MF |
1043 | /* the MAC is stored in OTP memory page 0xDF */ |
1044 | u32 ret; | |
1045 | u64 otp_mac; | |
1046 | u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; | |
1047 | ||
1048 | ret = otp_read(0xDF, 0x00, &otp_mac); | |
1049 | if (!(ret & 0x1)) { | |
1050 | char *otp_mac_p = (char *)&otp_mac; | |
1051 | for (ret = 0; ret < 6; ++ret) | |
1052 | addr[ret] = otp_mac_p[5 - ret]; | |
1053 | } | |
137b1529 | 1054 | } |
9862cc52 | 1055 | EXPORT_SYMBOL(bfin_get_ether_addr); |