Commit | Line | Data |
---|---|---|
1394f032 BW |
1 | /* |
2 | * File: arch/blackfin/mach-bf537/boards/stamp.c | |
3 | * Based on: arch/blackfin/mach-bf533/boards/ezkit.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2006 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/spi/spi.h> | |
36 | #include <linux/spi/flash.h> | |
37 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
38 | #include <linux/usb_isp1362.h> | |
39 | #endif | |
40 | #include <asm/irq.h> | |
41 | #include <linux/irq.h> | |
42 | #include <linux/interrupt.h> | |
43 | #include <asm/bfin5xx_spi.h> | |
44 | #include <linux/usb_sl811.h> | |
45 | ||
46 | #include <linux/spi/ad7877.h> | |
47 | ||
48 | /* | |
49 | * Name the Board for the /proc/cpuinfo | |
50 | */ | |
51 | char *bfin_board_name = "ADDS-BF537-STAMP"; | |
52 | ||
53 | /* | |
54 | * Driver needs to know address, irq and flag pin. | |
55 | */ | |
56 | ||
57 | #define ISP1761_BASE 0x203C0000 | |
58 | #define ISP1761_IRQ IRQ_PF7 | |
59 | ||
60 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) | |
61 | static struct resource bfin_isp1761_resources[] = { | |
62 | [0] = { | |
63 | .name = "isp1761-regs", | |
64 | .start = ISP1761_BASE + 0x00000000, | |
65 | .end = ISP1761_BASE + 0x000fffff, | |
66 | .flags = IORESOURCE_MEM, | |
67 | }, | |
68 | [1] = { | |
69 | .start = ISP1761_IRQ, | |
70 | .end = ISP1761_IRQ, | |
71 | .flags = IORESOURCE_IRQ, | |
72 | }, | |
73 | }; | |
74 | ||
75 | static struct platform_device bfin_isp1761_device = { | |
76 | .name = "isp1761", | |
77 | .id = 0, | |
78 | .num_resources = ARRAY_SIZE(bfin_isp1761_resources), | |
79 | .resource = bfin_isp1761_resources, | |
80 | }; | |
81 | ||
82 | static struct platform_device *bfin_isp1761_devices[] = { | |
83 | &bfin_isp1761_device, | |
84 | }; | |
85 | ||
86 | int __init bfin_isp1761_init(void) | |
87 | { | |
88 | unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices); | |
89 | ||
90 | printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); | |
91 | set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); | |
92 | ||
93 | return platform_add_devices(bfin_isp1761_devices, num_devices); | |
94 | } | |
95 | ||
96 | void __exit bfin_isp1761_exit(void) | |
97 | { | |
98 | platform_device_unregister(&bfin_isp1761_device); | |
99 | } | |
100 | ||
101 | arch_initcall(bfin_isp1761_init); | |
102 | #endif | |
103 | ||
104 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
105 | static struct resource bfin_pcmcia_cf_resources[] = { | |
106 | { | |
107 | .start = 0x20310000, /* IO PORT */ | |
108 | .end = 0x20312000, | |
109 | .flags = IORESOURCE_MEM, | |
110 | },{ | |
d2d50aa9 | 111 | .start = 0x20311000, /* Attribute Memory */ |
1394f032 BW |
112 | .end = 0x20311FFF, |
113 | .flags = IORESOURCE_MEM, | |
114 | },{ | |
115 | .start = IRQ_PF4, | |
116 | .end = IRQ_PF4, | |
117 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
118 | },{ | |
119 | .start = 6, /* Card Detect PF6 */ | |
120 | .end = 6, | |
121 | .flags = IORESOURCE_IRQ, | |
122 | }, | |
123 | }; | |
124 | ||
125 | static struct platform_device bfin_pcmcia_cf_device = { | |
126 | .name = "bfin_cf_pcmcia", | |
127 | .id = -1, | |
128 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
129 | .resource = bfin_pcmcia_cf_resources, | |
130 | }; | |
131 | #endif | |
132 | ||
133 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
134 | static struct platform_device rtc_device = { | |
135 | .name = "rtc-bfin", | |
136 | .id = -1, | |
137 | }; | |
138 | #endif | |
139 | ||
140 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
141 | static struct resource smc91x_resources[] = { | |
142 | { | |
143 | .name = "smc91x-regs", | |
144 | .start = 0x20300300, | |
145 | .end = 0x20300300 + 16, | |
146 | .flags = IORESOURCE_MEM, | |
147 | },{ | |
148 | ||
149 | .start = IRQ_PF7, | |
150 | .end = IRQ_PF7, | |
151 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
152 | }, | |
153 | }; | |
154 | static struct platform_device smc91x_device = { | |
155 | .name = "smc91x", | |
156 | .id = 0, | |
157 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
158 | .resource = smc91x_resources, | |
159 | }; | |
160 | #endif | |
161 | ||
162 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
163 | static struct resource sl811_hcd_resources[] = { | |
164 | { | |
165 | .start = 0x20340000, | |
166 | .end = 0x20340000, | |
167 | .flags = IORESOURCE_MEM, | |
168 | },{ | |
169 | .start = 0x20340004, | |
170 | .end = 0x20340004, | |
171 | .flags = IORESOURCE_MEM, | |
172 | },{ | |
173 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
174 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
175 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
176 | }, | |
177 | }; | |
178 | ||
179 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
180 | void sl811_port_power(struct device *dev, int is_on) | |
181 | { | |
182 | unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); | |
183 | ||
184 | bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); | |
185 | bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); | |
186 | ||
187 | if (is_on) | |
188 | bfin_write_FIO_FLAG_S(mask); | |
189 | else | |
190 | bfin_write_FIO_FLAG_C(mask); | |
191 | } | |
192 | #endif | |
193 | ||
194 | static struct sl811_platform_data sl811_priv = { | |
195 | .potpg = 10, | |
196 | .power = 250, /* == 500mA */ | |
197 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
198 | .port_power = &sl811_port_power, | |
199 | #endif | |
200 | }; | |
201 | ||
202 | static struct platform_device sl811_hcd_device = { | |
203 | .name = "sl811-hcd", | |
204 | .id = 0, | |
205 | .dev = { | |
206 | .platform_data = &sl811_priv, | |
207 | }, | |
208 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
209 | .resource = sl811_hcd_resources, | |
210 | }; | |
211 | #endif | |
212 | ||
213 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
214 | static struct resource isp1362_hcd_resources[] = { | |
215 | { | |
216 | .start = 0x20360000, | |
217 | .end = 0x20360000, | |
218 | .flags = IORESOURCE_MEM, | |
219 | },{ | |
220 | .start = 0x20360004, | |
221 | .end = 0x20360004, | |
222 | .flags = IORESOURCE_MEM, | |
223 | },{ | |
224 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
225 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
226 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
227 | }, | |
228 | }; | |
229 | ||
230 | static struct isp1362_platform_data isp1362_priv = { | |
231 | .sel15Kres = 1, | |
232 | .clknotstop = 0, | |
233 | .oc_enable = 0, | |
234 | .int_act_high = 0, | |
235 | .int_edge_triggered = 0, | |
236 | .remote_wakeup_connected = 0, | |
237 | .no_power_switching = 1, | |
238 | .power_switching_mode = 0, | |
239 | }; | |
240 | ||
241 | static struct platform_device isp1362_hcd_device = { | |
242 | .name = "isp1362-hcd", | |
243 | .id = 0, | |
244 | .dev = { | |
245 | .platform_data = &isp1362_priv, | |
246 | }, | |
247 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
248 | .resource = isp1362_hcd_resources, | |
249 | }; | |
250 | #endif | |
251 | ||
252 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
253 | static struct platform_device bfin_mac_device = { | |
254 | .name = "bfin_mac", | |
255 | }; | |
256 | #endif | |
257 | ||
258 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
259 | static struct resource net2272_bfin_resources[] = { | |
260 | { | |
261 | .start = 0x20300000, | |
262 | .end = 0x20300000 + 0x100, | |
263 | .flags = IORESOURCE_MEM, | |
264 | },{ | |
265 | .start = IRQ_PF7, | |
266 | .end = IRQ_PF7, | |
267 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
268 | }, | |
269 | }; | |
270 | ||
271 | static struct platform_device net2272_bfin_device = { | |
272 | .name = "net2272", | |
273 | .id = -1, | |
274 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
275 | .resource = net2272_bfin_resources, | |
276 | }; | |
277 | #endif | |
278 | ||
279 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
280 | /* all SPI peripherals info goes here */ | |
281 | ||
282 | #if defined(CONFIG_MTD_M25P80) \ | |
283 | || defined(CONFIG_MTD_M25P80_MODULE) | |
284 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
285 | { | |
286 | .name = "bootloader", | |
287 | .size = 0x00020000, | |
288 | .offset = 0, | |
289 | .mask_flags = MTD_CAP_ROM | |
290 | },{ | |
291 | .name = "kernel", | |
292 | .size = 0xe0000, | |
293 | .offset = 0x20000 | |
294 | },{ | |
295 | .name = "file system", | |
296 | .size = 0x700000, | |
297 | .offset = 0x00100000, | |
298 | } | |
299 | }; | |
300 | ||
301 | static struct flash_platform_data bfin_spi_flash_data = { | |
302 | .name = "m25p80", | |
303 | .parts = bfin_spi_flash_partitions, | |
304 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
305 | .type = "m25p64", | |
306 | }; | |
307 | ||
308 | /* SPI flash chip (m25p64) */ | |
309 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
310 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
311 | .bits_per_word = 8, | |
312 | }; | |
313 | #endif | |
314 | ||
315 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
316 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
317 | /* SPI ADC chip */ | |
318 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
319 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
320 | .bits_per_word = 16, | |
321 | }; | |
322 | #endif | |
323 | ||
324 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
325 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
326 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
327 | .enable_dma = 0, | |
328 | .bits_per_word = 16, | |
329 | }; | |
330 | #endif | |
331 | ||
332 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
333 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | |
334 | .enable_dma = 0, | |
335 | .bits_per_word = 16, | |
336 | }; | |
337 | #endif | |
338 | ||
339 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
340 | static struct bfin5xx_spi_chip spi_mmc_chip_info = { | |
341 | .enable_dma = 1, | |
342 | .bits_per_word = 8, | |
343 | }; | |
344 | #endif | |
345 | ||
346 | #if defined(CONFIG_PBX) | |
347 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
348 | .ctl_reg = 0x4, /* send zero */ | |
349 | .enable_dma = 0, | |
350 | .bits_per_word = 8, | |
351 | .cs_change_per_word = 1, | |
352 | }; | |
353 | #endif | |
354 | ||
355 | #if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) | |
356 | static struct bfin5xx_spi_chip ad5304_chip_info = { | |
357 | .enable_dma = 0, | |
358 | .bits_per_word = 16, | |
359 | }; | |
360 | #endif | |
361 | ||
362 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
363 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
364 | // .cs_change_per_word = 1, | |
365 | .enable_dma = 0, | |
366 | .bits_per_word = 16, | |
367 | }; | |
368 | ||
369 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
370 | .model = 7877, | |
371 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
372 | .x_plate_ohms = 419, | |
373 | .y_plate_ohms = 486, | |
374 | .pressure_max = 1000, | |
375 | .pressure_min = 0, | |
376 | .stopacq_polarity = 1, | |
377 | .first_conversion_delay = 3, | |
378 | .acquisition_time = 1, | |
379 | .averaging = 1, | |
380 | .pen_down_acc_interval = 1, | |
381 | }; | |
382 | #endif | |
383 | ||
384 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | |
385 | #if defined(CONFIG_MTD_M25P80) \ | |
386 | || defined(CONFIG_MTD_M25P80_MODULE) | |
387 | { | |
388 | /* the modalias must be the same as spi device driver name */ | |
389 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
390 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
391 | .bus_num = 1, /* Framework bus number */ | |
392 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
393 | .platform_data = &bfin_spi_flash_data, | |
394 | .controller_data = &spi_flash_chip_info, | |
395 | .mode = SPI_MODE_3, | |
396 | }, | |
397 | #endif | |
398 | ||
399 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
400 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
401 | { | |
402 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
403 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
404 | .bus_num = 1, /* Framework bus number */ | |
405 | .chip_select = 1, /* Framework chip select. */ | |
406 | .platform_data = NULL, /* No spi_driver specific config */ | |
407 | .controller_data = &spi_adc_chip_info, | |
408 | }, | |
409 | #endif | |
410 | ||
411 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
412 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
413 | { | |
414 | .modalias = "ad1836-spi", | |
415 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
416 | .bus_num = 1, | |
417 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
418 | .controller_data = &ad1836_spi_chip_info, | |
419 | }, | |
420 | #endif | |
421 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
422 | { | |
423 | .modalias = "ad9960-spi", | |
424 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | |
425 | .bus_num = 1, | |
426 | .chip_select = 1, | |
427 | .controller_data = &ad9960_spi_chip_info, | |
428 | }, | |
429 | #endif | |
430 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
431 | { | |
432 | .modalias = "spi_mmc_dummy", | |
433 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
434 | .bus_num = 1, | |
435 | .chip_select = 0, | |
436 | .platform_data = NULL, | |
437 | .controller_data = &spi_mmc_chip_info, | |
438 | .mode = SPI_MODE_3, | |
439 | }, | |
440 | { | |
441 | .modalias = "spi_mmc", | |
442 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
443 | .bus_num = 1, | |
444 | .chip_select = CONFIG_SPI_MMC_CS_CHAN, | |
445 | .platform_data = NULL, | |
446 | .controller_data = &spi_mmc_chip_info, | |
447 | .mode = SPI_MODE_3, | |
448 | }, | |
449 | #endif | |
450 | #if defined(CONFIG_PBX) | |
451 | { | |
452 | .modalias = "fxs-spi", | |
453 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
454 | .bus_num = 1, | |
455 | .chip_select = 3, | |
456 | .controller_data= &spi_si3xxx_chip_info, | |
457 | .mode = SPI_MODE_3, | |
458 | }, | |
459 | { | |
460 | .modalias = "fxo-spi", | |
461 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
462 | .bus_num = 1, | |
463 | .chip_select = 2, | |
464 | .controller_data= &spi_si3xxx_chip_info, | |
465 | .mode = SPI_MODE_3, | |
466 | }, | |
467 | #endif | |
468 | #if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) | |
469 | { | |
470 | .modalias = "ad5304_spi", | |
471 | .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ | |
472 | .bus_num = 1, | |
473 | .chip_select = 2, | |
474 | .platform_data = NULL, | |
475 | .controller_data = &ad5304_chip_info, | |
476 | .mode = SPI_MODE_2, | |
477 | }, | |
478 | #endif | |
479 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
480 | { | |
481 | .modalias = "ad7877", | |
482 | .platform_data = &bfin_ad7877_ts_info, | |
483 | .irq = IRQ_PF6, | |
484 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
485 | .bus_num = 1, | |
486 | .chip_select = 1, | |
487 | .controller_data = &spi_ad7877_chip_info, | |
488 | }, | |
489 | #endif | |
490 | }; | |
491 | ||
492 | /* SPI controller data */ | |
493 | static struct bfin5xx_spi_master spi_bfin_master_info = { | |
494 | .num_chipselect = 8, | |
495 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
496 | }; | |
497 | ||
498 | static struct platform_device spi_bfin_master_device = { | |
499 | .name = "bfin-spi-master", | |
500 | .id = 1, /* Bus number */ | |
501 | .dev = { | |
502 | .platform_data = &spi_bfin_master_info, /* Passed to driver */ | |
503 | }, | |
504 | }; | |
505 | #endif /* spi master and devices */ | |
506 | ||
507 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
508 | static struct platform_device bfin_fb_device = { | |
509 | .name = "bf537-fb", | |
510 | }; | |
511 | #endif | |
512 | ||
513 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
514 | static struct resource bfin_uart_resources[] = { | |
515 | { | |
516 | .start = 0xFFC00400, | |
517 | .end = 0xFFC004FF, | |
518 | .flags = IORESOURCE_MEM, | |
519 | },{ | |
520 | .start = 0xFFC02000, | |
521 | .end = 0xFFC020FF, | |
522 | .flags = IORESOURCE_MEM, | |
523 | }, | |
524 | }; | |
525 | ||
526 | static struct platform_device bfin_uart_device = { | |
527 | .name = "bfin-uart", | |
528 | .id = 1, | |
529 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
530 | .resource = bfin_uart_resources, | |
531 | }; | |
532 | #endif | |
533 | ||
534 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
535 | static struct platform_device i2c_bfin_twi_device = { | |
536 | .name = "i2c-bfin-twi", | |
537 | .id = 0, | |
538 | }; | |
539 | #endif | |
540 | ||
541 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
542 | static struct platform_device bfin_sport0_uart_device = { | |
543 | .name = "bfin-sport-uart", | |
544 | .id = 0, | |
545 | }; | |
546 | ||
547 | static struct platform_device bfin_sport1_uart_device = { | |
548 | .name = "bfin-sport-uart", | |
549 | .id = 1, | |
550 | }; | |
551 | #endif | |
552 | ||
553 | static struct platform_device *stamp_devices[] __initdata = { | |
554 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
555 | &bfin_pcmcia_cf_device, | |
556 | #endif | |
557 | ||
558 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
559 | &rtc_device, | |
560 | #endif | |
561 | ||
562 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
563 | &sl811_hcd_device, | |
564 | #endif | |
565 | ||
566 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
567 | &isp1362_hcd_device, | |
568 | #endif | |
569 | ||
570 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
571 | &smc91x_device, | |
572 | #endif | |
573 | ||
574 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
575 | &bfin_mac_device, | |
576 | #endif | |
577 | ||
578 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
579 | &net2272_bfin_device, | |
580 | #endif | |
581 | ||
582 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
583 | &spi_bfin_master_device, | |
584 | #endif | |
585 | ||
586 | #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) | |
587 | &bfin_fb_device, | |
588 | #endif | |
589 | ||
590 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
591 | &bfin_uart_device, | |
592 | #endif | |
593 | ||
594 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
595 | &i2c_bfin_twi_device, | |
596 | #endif | |
597 | ||
598 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
599 | &bfin_sport0_uart_device, | |
600 | &bfin_sport1_uart_device, | |
601 | #endif | |
602 | }; | |
603 | ||
604 | static int __init stamp_init(void) | |
605 | { | |
606 | printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); | |
607 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); | |
608 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
609 | spi_register_board_info(bfin_spi_board_info, | |
610 | ARRAY_SIZE(bfin_spi_board_info)); | |
611 | #endif | |
612 | return 0; | |
613 | } | |
614 | ||
615 | arch_initcall(stamp_init); |