[deliverable/linux.git] / arch / i386 / kernel / cpu / cpufreq / elanfreq.c

/*
 * 	elanfreq: 	cpufreq driver for the AMD ELAN family
 *
 *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
 *
 *	Parts of this code are (c) Sven Geggus <sven@geggus.net> 
 *
 *      All Rights Reserved. 
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License
 *	as published by the Free Software Foundation; either version
 *	2 of the License, or (at your option) any later version. 
 *
 *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>

#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/cpufreq.h>

#include <asm/msr.h>
#include <asm/timex.h>
#include <asm/io.h>

#define REG_CSCIR 0x22 		/* Chip Setup and Control Index Register    */
#define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */

/* Module parameter */
static int max_freq;

struct s_elan_multiplier {
	int clock;		/* frequency in kHz                         */
	int val40h;		/* PMU Force Mode register                  */
	int val80h;		/* CPU Clock Speed Register                 */
};

/*
 * It is important that the frequencies 
 * are listed in ascending order here!
 */
struct s_elan_multiplier elan_multiplier[] = {
	{1000,	0x02,	0x18},
	{2000,	0x02,	0x10},
	{4000,	0x02,	0x08},
	{8000,	0x00,	0x00},
	{16000,	0x00,	0x02},
	{33000,	0x00,	0x04},
	{66000,	0x01,	0x04},
	{99000,	0x01,	0x05}
};

static struct cpufreq_frequency_table elanfreq_table[] = {
	{0,	1000},
	{1,	2000},
	{2,	4000},
	{3,	8000},
	{4,	16000},
	{5,	33000},
	{6,	66000},
	{7,	99000},
	{0,	CPUFREQ_TABLE_END},
};


/**
 *	elanfreq_get_cpu_frequency: determine current cpu speed
 *
 *	Finds out at which frequency the CPU of the Elan SOC runs
 *	at the moment. Frequencies from 1 to 33 MHz are generated 
 *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
 *	and have the rest of the chip running with 33 MHz. 
 */

static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
{
        u8 clockspeed_reg;    /* Clock Speed Register */
	
	local_irq_disable();
        outb_p(0x80,REG_CSCIR);
        clockspeed_reg = inb_p(REG_CSCDR);
	local_irq_enable();

        if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }

        /* Are we in CPU clock multiplied mode (66/99 MHz)? */
        if ((clockspeed_reg & 0xE0) == 0xC0) {
                if ((clockspeed_reg & 0x01) == 0) {
			return 66000;
		} else {
			return 99000;             
		}
        }

	/* 33 MHz is not 32 MHz... */
	if ((clockspeed_reg & 0xE0)==0xA0)
		return 33000;

        return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
}


/**
 *      elanfreq_set_cpu_frequency: Change the CPU core frequency
 * 	@cpu: cpu number
 *	@freq: frequency in kHz
 *
 *      This function takes a frequency value and changes the CPU frequency 
 *	according to this. Note that the frequency has to be checked by
 *	elanfreq_validatespeed() for correctness!
 *	
 *	There is no return value. 
 */

static void elanfreq_set_cpu_state (unsigned int state) {

	struct cpufreq_freqs    freqs;

	freqs.old = elanfreq_get_cpu_frequency(0);
	freqs.new = elan_multiplier[state].clock;
	freqs.cpu = 0; /* elanfreq.c is UP only driver */
	
	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);


	/* 
	 * Access to the Elan's internal registers is indexed via    
	 * 0x22: Chip Setup & Control Register Index Register (CSCI) 
	 * 0x23: Chip Setup & Control Register Data  Register (CSCD) 
	 *
	 */

	/* 
	 * 0x40 is the Power Management Unit's Force Mode Register. 
	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
	 */

	local_irq_disable();
	outb_p(0x40,REG_CSCIR); 	/* Disable hyperspeed mode          */
	outb_p(0x00,REG_CSCDR);
	local_irq_enable();		/* wait till internal pipelines and */
	udelay(1000);			/* buffers have cleaned up          */

	local_irq_disable();

	/* now, set the CPU clock speed register (0x80) */
	outb_p(0x80,REG_CSCIR);
	outb_p(elan_multiplier[state].val80h,REG_CSCDR);

	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
	outb_p(0x40,REG_CSCIR);
	outb_p(elan_multiplier[state].val40h,REG_CSCDR);
	udelay(10000);
	local_irq_enable();

	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
};


/**
 *	elanfreq_validatespeed: test if frequency range is valid
 *      @policy: the policy to validate
 *
 *	This function checks if a given frequency range in kHz is valid 
 *      for the hardware supported by the driver. 
 */

static int elanfreq_verify (struct cpufreq_policy *policy)
{
	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
}

static int elanfreq_target (struct cpufreq_policy *policy, 
			    unsigned int target_freq, 
			    unsigned int relation)
{
	unsigned int    newstate = 0;

	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
		return -EINVAL;

	elanfreq_set_cpu_state(newstate);

	return 0;
}


/*
 *	Module init and exit code
 */

static int elanfreq_cpu_init(struct cpufreq_policy *policy)
{
	struct cpuinfo_x86 *c = cpu_data;
	unsigned int i;
	int result;

	/* capability check */
	if ((c->x86_vendor != X86_VENDOR_AMD) ||
	    (c->x86 != 4) || (c->x86_model!=10))
		return -ENODEV;

	/* max freq */
	if (!max_freq)
		max_freq = elanfreq_get_cpu_frequency(0);

	/* table init */
 	for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
		if (elanfreq_table[i].frequency > max_freq)
			elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
	}

	/* cpuinfo and default policy values */
	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
	policy->cur = elanfreq_get_cpu_frequency(0);

	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
	if (result)
		return (result);

        cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);

	return 0;
}


static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
{
	cpufreq_frequency_table_put_attr(policy->cpu);
	return 0;
}


#ifndef MODULE
/**
 * elanfreq_setup - elanfreq command line parameter parsing
 *
 * elanfreq command line parameter.  Use:
 *  elanfreq=66000
 * to set the maximum CPU frequency to 66 MHz. Note that in
 * case you do not give this boot parameter, the maximum
 * frequency will fall back to _current_ CPU frequency which
 * might be lower. If you build this as a module, use the
 * max_freq module parameter instead.
 */
static int __init elanfreq_setup(char *str)
{
	max_freq = simple_strtoul(str, &str, 0);
	printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
	return 1;
}
__setup("elanfreq=", elanfreq_setup);
#endif


static struct freq_attr* elanfreq_attr[] = {
	&cpufreq_freq_attr_scaling_available_freqs,
	NULL,
};


static struct cpufreq_driver elanfreq_driver = {
	.get	 	= elanfreq_get_cpu_frequency,
	.verify 	= elanfreq_verify,
	.target 	= elanfreq_target,
	.init		= elanfreq_cpu_init,
	.exit		= elanfreq_cpu_exit,
	.name		= "elanfreq",
	.owner		= THIS_MODULE,
	.attr		= elanfreq_attr,
};


static int __init elanfreq_init(void) 
{	
	struct cpuinfo_x86 *c = cpu_data;

	/* Test if we have the right hardware */
	if ((c->x86_vendor != X86_VENDOR_AMD) ||
		(c->x86 != 4) || (c->x86_model!=10))
	{
		printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
                return -ENODEV;
	}
	
	return cpufreq_register_driver(&elanfreq_driver);
}


static void __exit elanfreq_exit(void) 
{
	cpufreq_unregister_driver(&elanfreq_driver);
}


module_param (max_freq, int, 0444);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");

module_init(elanfreq_init);
module_exit(elanfreq_exit);
Commit	Line	Data
1da177e4 LT	1	/*
	2	* elanfreq: cpufreq driver for the AMD ELAN family
	3	*
	4	* (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
	5	*
	6	* Parts of this code are (c) Sven Geggus <sven@geggus.net>
	7	*
	8	* All Rights Reserved.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License
	12	* as published by the Free Software Foundation; either version
	13	* 2 of the License, or (at your option) any later version.
	14	*
	15	* 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
	16	*
	17	*/
	18
	19	#include <linux/kernel.h>
	20	#include <linux/module.h>
	21	#include <linux/init.h>
	22
	23	#include <linux/slab.h>
	24	#include <linux/delay.h>
	25	#include <linux/cpufreq.h>
	26
	27	#include <asm/msr.h>
	28	#include <asm/timex.h>
	29	#include <asm/io.h>
	30
	31	#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
	32	#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
	33
	34	/* Module parameter */
	35	static int max_freq;
	36
	37	struct s_elan_multiplier {
	38	int clock; /* frequency in kHz */
	39	int val40h; /* PMU Force Mode register */
	40	int val80h; /* CPU Clock Speed Register */
	41	};
	42
	43	/*
	44	* It is important that the frequencies
	45	* are listed in ascending order here!
	46	*/
	47	struct s_elan_multiplier elan_multiplier[] = {
	48	{1000, 0x02, 0x18},
	49	{2000, 0x02, 0x10},
	50	{4000, 0x02, 0x08},
	51	{8000, 0x00, 0x00},
	52	{16000, 0x00, 0x02},
	53	{33000, 0x00, 0x04},
	54	{66000, 0x01, 0x04},
	55	{99000, 0x01, 0x05}
	56	};
	57
	58	static struct cpufreq_frequency_table elanfreq_table[] = {
	59	{0, 1000},
	60	{1, 2000},
	61	{2, 4000},
	62	{3, 8000},
	63	{4, 16000},
	64	{5, 33000},
65	{6, 66000},
66	{7, 99000},
67	{0, CPUFREQ_TABLE_END},
68	};
69
70
71	/**
72	* elanfreq_get_cpu_frequency: determine current cpu speed
73	*
74	* Finds out at which frequency the CPU of the Elan SOC runs
75	* at the moment. Frequencies from 1 to 33 MHz are generated
76	* the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
77	* and have the rest of the chip running with 33 MHz.
78	*/
79
80	static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
81	{
82	u8 clockspeed_reg; /* Clock Speed Register */
83
84	local_irq_disable();
85	outb_p(0x80,REG_CSCIR);
86	clockspeed_reg = inb_p(REG_CSCDR);
87	local_irq_enable();
88
89	if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }
90
91	/* Are we in CPU clock multiplied mode (66/99 MHz)? */
92	if ((clockspeed_reg & 0xE0) == 0xC0) {
93	if ((clockspeed_reg & 0x01) == 0) {
94	return 66000;
95	} else {
96	return 99000;
97	}
98	}
99
100	/* 33 MHz is not 32 MHz... */
101	if ((clockspeed_reg & 0xE0)==0xA0)
102	return 33000;
103
104	return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
105	}
106
107
108	/**
109	* elanfreq_set_cpu_frequency: Change the CPU core frequency
110	* @cpu: cpu number
111	* @freq: frequency in kHz
112	*
113	* This function takes a frequency value and changes the CPU frequency
114	* according to this. Note that the frequency has to be checked by
115	* elanfreq_validatespeed() for correctness!
116	*
117	* There is no return value.
118	*/
119
120	static void elanfreq_set_cpu_state (unsigned int state) {
121
122	struct cpufreq_freqs freqs;
123
124	freqs.old = elanfreq_get_cpu_frequency(0);
125	freqs.new = elan_multiplier[state].clock;
126	freqs.cpu = 0; /* elanfreq.c is UP only driver */
127
128	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
129
130	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);
131
132
133	/*
134	* Access to the Elan's internal registers is indexed via
135	* 0x22: Chip Setup & Control Register Index Register (CSCI)
136	* 0x23: Chip Setup & Control Register Data Register (CSCD)
137	*
138	*/
139
140	/*
141	* 0x40 is the Power Management Unit's Force Mode Register.
142	* Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
143	*/
144
145	local_irq_disable();
146	outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */
147	outb_p(0x00,REG_CSCDR);
148	local_irq_enable(); /* wait till internal pipelines and */
149	udelay(1000); /* buffers have cleaned up */
150
151	local_irq_disable();
152
153	/* now, set the CPU clock speed register (0x80) */
154	outb_p(0x80,REG_CSCIR);
155	outb_p(elan_multiplier[state].val80h,REG_CSCDR);
156
157	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
158	outb_p(0x40,REG_CSCIR);
159	outb_p(elan_multiplier[state].val40h,REG_CSCDR);
160	udelay(10000);
161	local_irq_enable();
162
163	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
164	};
165
166
167	/**
168	* elanfreq_validatespeed: test if frequency range is valid
169	* @policy: the policy to validate
170	*
171	* This function checks if a given frequency range in kHz is valid
172	* for the hardware supported by the driver.
173	*/
174
175	static int elanfreq_verify (struct cpufreq_policy *policy)
176	{
177	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
178	}
179
180	static int elanfreq_target (struct cpufreq_policy *policy,
181	unsigned int target_freq,
182	unsigned int relation)
183	{
184	unsigned int newstate = 0;
185
186	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
187	return -EINVAL;
188
189	elanfreq_set_cpu_state(newstate);
190
191	return 0;
192	}
193
194
195	/*
196	* Module init and exit code
197	*/
198
199	static int elanfreq_cpu_init(struct cpufreq_policy *policy)
200	{
201	struct cpuinfo_x86 *c = cpu_data;
202	unsigned int i;
203	int result;
204
205	/* capability check */
206	if ((c->x86_vendor != X86_VENDOR_AMD) \|\|
207	(c->x86 != 4) \|\| (c->x86_model!=10))
208	return -ENODEV;
209
210	/* max freq */
211	if (!max_freq)
212	max_freq = elanfreq_get_cpu_frequency(0);
213
214	/* table init */
215	for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
216	if (elanfreq_table[i].frequency > max_freq)
217	elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
218	}
219
220	/* cpuinfo and default policy values */
221	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
222	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
223	policy->cur = elanfreq_get_cpu_frequency(0);
224
225	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
226	if (result)
227	return (result);
228
229	cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
230
231	return 0;
232	}
233
234
235	static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
236	{
237	cpufreq_frequency_table_put_attr(policy->cpu);
238	return 0;
239	}
240
241
242	#ifndef MODULE
243	/**
244	* elanfreq_setup - elanfreq command line parameter parsing
245	*
246	* elanfreq command line parameter. Use:
247	* elanfreq=66000
248	* to set the maximum CPU frequency to 66 MHz. Note that in
249	* case you do not give this boot parameter, the maximum
250	* frequency will fall back to _current_ CPU frequency which
251	* might be lower. If you build this as a module, use the
252	* max_freq module parameter instead.
253	*/
254	static int __init elanfreq_setup(char *str)
255	{
256	max_freq = simple_strtoul(str, &str, 0);
257	printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
258	return 1;
259	}
260	__setup("elanfreq=", elanfreq_setup);
261	#endif
262
263
264	static struct freq_attr* elanfreq_attr[] = {
265	&cpufreq_freq_attr_scaling_available_freqs,
266	NULL,
267	};
268
269
270	static struct cpufreq_driver elanfreq_driver = {
271	.get = elanfreq_get_cpu_frequency,
272	.verify = elanfreq_verify,
273	.target = elanfreq_target,
274	.init = elanfreq_cpu_init,
275	.exit = elanfreq_cpu_exit,
276	.name = "elanfreq",
277	.owner = THIS_MODULE,
278	.attr = elanfreq_attr,
279	};
280
281
282	static int __init elanfreq_init(void)
283	{
284	struct cpuinfo_x86 *c = cpu_data;
285
286	/* Test if we have the right hardware */
287	if ((c->x86_vendor != X86_VENDOR_AMD) \|\|
288	(c->x86 != 4) \|\| (c->x86_model!=10))
289	{
290	printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
291	return -ENODEV;
292	}
293
294	return cpufreq_register_driver(&elanfreq_driver);
295	}
296
297
298	static void __exit elanfreq_exit(void)
299	{
300	cpufreq_unregister_driver(&elanfreq_driver);
301	}
302
303
304	module_param (max_freq, int, 0444);
305
306	MODULE_LICENSE("GPL");
307	MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
308	MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
309
310	module_init(elanfreq_init);
311	module_exit(elanfreq_exit);
312