[deliverable/linux.git] / arch / m32r / Kconfig

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux/M32R Kernel Configuration"

config M32R
	bool
	default y
	select HAVE_IDE
	select HAVE_OPROFILE

config SBUS
	bool

config GENERIC_ISA_DMA
	bool
	default y

config ZONE_DMA
	bool
	default y

config GENERIC_HARDIRQS
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

config NO_IOPORT
	def_bool y

config NO_DMA
	def_bool y

config HZ
	int
	default 100

source "init/Kconfig"


menu "Processor type and features"

choice
	prompt "Platform Type"
	default PLAT_MAPPI

config PLAT_MAPPI
	bool "Mappi-I"
	help
	  The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
	  You can operate a Linux system on this board by using an M32R
	  softmacro core, which is a fully-synthesizable functional model
	  described in Verilog-HDL.

	  The Mappi-I board was the first platform, which had been used
	  to port and develop a Linux system for the M32R processor.
	  Currently, the Mappi-II, an heir to the Mappi-I, is available.

config PLAT_USRV
	bool "uServer"
	select PLAT_HAS_INT1ICU

config PLAT_M32700UT
	bool "M32700UT"
	select PLAT_HAS_INT0ICU
	select PLAT_HAS_INT1ICU
	select PLAT_HAS_INT2ICU
	help
	  The M3T-M32700UT is an evaluation board based on uT-Engine
	  specification.  This board has an M32700 (Chaos) evaluation chip.
	  You can say Y for SMP, because the M32700 is a single chip
	  multiprocessor.

config PLAT_OPSPUT
	bool "OPSPUT"
	select PLAT_HAS_INT0ICU
	select PLAT_HAS_INT1ICU
	select PLAT_HAS_INT2ICU
	help
	  The OPSPUT is an evaluation board based on uT-Engine
	  specification.  This board has a OPSP-REP chip.

config PLAT_OAKS32R
	bool "OAKS32R"
	help
	  The OAKS32R is a tiny, inexpensive evaluation board.
	  Please note that if you say Y here and choose chip "M32102",
	  say N for MMU and select a no-MMU version kernel, otherwise
	  a kernel with MMU support will not work, because the M32102
	  is a microcontroller for embedded systems and it has no MMU.

config PLAT_MAPPI2
       bool "Mappi-II(M3A-ZA36/M3A-ZA52)"

config PLAT_MAPPI3
       bool "Mappi-III(M3A-2170)"

config PLAT_M32104UT
	bool "M32104UT"
	select PLAT_HAS_INT1ICU
	help
	  The M3T-M32104UT is an reference board based on uT-Engine
	  specification.  This board has a M32104 chip.

endchoice

choice
	prompt "Processor family"
	default CHIP_M32700

config CHIP_M32700
	bool "M32700 (Chaos)"

config CHIP_M32102
	bool "M32102"

config CHIP_M32104
	bool "M32104"
	depends on PLAT_M32104UT

config CHIP_VDEC2
       bool "VDEC2"

config CHIP_OPSP
       bool "OPSP"

endchoice

config MMU
	bool "Support for memory management hardware"
	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
	default y

config TLB_ENTRIES
       int "TLB Entries"
       depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
       default 32 if CHIP_M32700 || CHIP_OPSP
       default 16 if CHIP_VDEC2


config ISA_M32R
        bool
	depends on CHIP_M32102 || CHIP_M32104
	default y

config ISA_M32R2
	bool
	depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
	default y

config ISA_DSP_LEVEL2
	bool
	depends on CHIP_M32700 || CHIP_OPSP
	default y

config ISA_DUAL_ISSUE
	bool
	depends on CHIP_M32700 || CHIP_OPSP
	default y

config PLAT_HAS_INT0ICU
	bool
	default n

config PLAT_HAS_INT1ICU
	bool
	default n

config PLAT_HAS_INT2ICU
	bool
	default n

config BUS_CLOCK
	int "Bus Clock [Hz] (integer)"
	default "70000000" if PLAT_MAPPI
	default "25000000" if PLAT_USRV
	default "50000000" if PLAT_MAPPI3
	default "50000000" if PLAT_M32700UT
	default "50000000" if PLAT_OPSPUT
	default "54000000" if PLAT_M32104UT
	default "33333333" if PLAT_OAKS32R
	default "20000000" if PLAT_MAPPI2

config TIMER_DIVIDE
	int "Timer divider (integer)"
	default "128"

config CPU_LITTLE_ENDIAN
        bool "Generate little endian code"
	default n

config MEMORY_START
	hex "Physical memory start address (hex)"
	default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3
	default "08000000" if PLAT_USRV
	default "08000000" if PLAT_M32700UT
	default "08000000" if PLAT_OPSPUT
	default "04000000" if PLAT_M32104UT
	default "01000000" if PLAT_OAKS32R

config MEMORY_SIZE
	hex "Physical memory size (hex)"
	default "08000000" if PLAT_MAPPI3
	default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
	default "02000000" if PLAT_USRV
	default "01000000" if PLAT_M32700UT
	default "01000000" if PLAT_OPSPUT
	default "01000000" if PLAT_M32104UT
	default "00800000" if PLAT_OAKS32R

config ARCH_DISCONTIGMEM_ENABLE
	bool "Internal RAM Support"
	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
	default y

source "mm/Kconfig"

config IRAM_START
	hex "Internal memory start address (hex)"
	default "00f00000" if !CHIP_M32104
	default "00700000" if CHIP_M32104
	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM

config IRAM_SIZE
	hex "Internal memory size (hex)"
	depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
	default "00080000" if CHIP_M32700
	default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104
	default "00008000" if CHIP_VDEC2

#
# Define implied options from the CPU selection here
#

config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPT

config RWSEM_GENERIC_SPINLOCK
	bool
	depends on M32R
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool
	default n

config ARCH_HAS_ILOG2_U32
	bool
	default n

config ARCH_HAS_ILOG2_U64
	bool
	default n

config GENERIC_FIND_NEXT_BIT
	bool
	default y

config GENERIC_HWEIGHT
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config SCHED_NO_NO_OMIT_FRAME_POINTER
        bool
        default y

config PREEMPT
	bool "Preemptible Kernel"
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

config SMP
	bool "Symmetric multi-processing support"
	select USE_GENERIC_SMP_HELPERS
	---help---
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
	  singleprocessor machines. On a singleprocessor machine, the kernel
	  will run faster if you say N here.

	  People using multiprocessor machines who say Y here should also say
	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	  Management" code will be disabled if you say Y here.

	  See also the SMP-HOWTO available at
	  <http://www.linuxdoc.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config CHIP_M32700_TS1
	bool "Workaround code for the M32700 TS1 chip's bug"
	depends on (CHIP_M32700 && SMP)
	default n

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "2"
	help
	  This allows you to specify the maximum number of CPUs which this
	  kernel will support.  The maximum supported value is 32 and the
	  minimum value which makes sense is 2.

	  This is purely to save memory - each supported CPU adds
	  approximately eight kilobytes to the kernel image.

# Common NUMA Features
config NUMA
	bool "Numa Memory Allocation Support"
	depends on SMP && BROKEN
	default n

config NODES_SHIFT
	int
	default "1"
	depends on NEED_MULTIPLE_NODES

# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
	bool
	depends on NUMA
	default n

endmenu


menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"

config PCI
	bool "PCI support"
	depends on BROKEN
	default n
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

choice
	prompt "PCI access mode"
	depends on PCI
	default PCI_GOANY

config PCI_GOBIOS
	bool "BIOS"
	---help---
	  On PCI systems, the BIOS can be used to detect the PCI devices and
	  determine their configuration. However, some old PCI motherboards
	  have BIOS bugs and may crash if this is done. Also, some embedded
	  PCI-based systems don't have any BIOS at all. Linux can also try to
	  detect the PCI hardware directly without using the BIOS.

	  With this option, you can specify how Linux should detect the PCI
	  devices. If you choose "BIOS", the BIOS will be used, if you choose
	  "Direct", the BIOS won't be used, and if you choose "Any", the
	  kernel will try the direct access method and falls back to the BIOS
	  if that doesn't work. If unsure, go with the default, which is
	  "Any".

config PCI_GODIRECT
	bool "Direct"

config PCI_GOANY
	bool "Any"

endchoice

config PCI_BIOS
	bool
	depends on PCI && (PCI_GOBIOS || PCI_GOANY)
	default y

config PCI_DIRECT
	bool
 	depends on PCI && (PCI_GODIRECT || PCI_GOANY)
	default y

source "drivers/pci/Kconfig"

config ISA
	bool

source "drivers/pcmcia/Kconfig"

source "drivers/pci/hotplug/Kconfig"

endmenu


menu "Executable file formats"

source "fs/Kconfig.binfmt"

endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/m32r/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"
Commit	Line	Data
1da177e4 LT	1	#
	2	# For a description of the syntax of this configuration file,
	3	# see Documentation/kbuild/kconfig-language.txt.
	4	#
	5
	6	mainmenu "Linux/M32R Kernel Configuration"
	7
	8	config M32R
	9	bool
	10	default y
ec7748b5	11	select HAVE_IDE
42d4b839	12	select HAVE_OPROFILE
1da177e4 LT	13
	14	config SBUS
	15	bool
	16
1da177e4 LT	17	config GENERIC_ISA_DMA
	18	bool
	19	default y
	20
5ac6da66 CL	21	config ZONE_DMA
	22	bool
	23	default y
	24
1da177e4 LT	25	config GENERIC_HARDIRQS
	26	bool
	27	default y
	28
	29	config GENERIC_IRQ_PROBE
	30	bool
	31	default y
	32
5ea81769 AV	33	config NO_IOPORT
	34	def_bool y
	35
1b0fac45 DW	36	config NO_DMA
	37	def_bool y
	38
bdc80787 PA	39	config HZ
	40	int
	41	default 100
	42
1da177e4 LT	43	source "init/Kconfig"
	44
	45
	46	menu "Processor type and features"
	47
	48	choice
	49	prompt "Platform Type"
	50	default PLAT_MAPPI
	51
	52	config PLAT_MAPPI
	53	bool "Mappi-I"
	54	help
	55	The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
	56	You can operate a Linux system on this board by using an M32R
	57	softmacro core, which is a fully-synthesizable functional model
	58	described in Verilog-HDL.
	59
	60	The Mappi-I board was the first platform, which had been used
	61	to port and develop a Linux system for the M32R processor.
	62	Currently, the Mappi-II, an heir to the Mappi-I, is available.
	63
	64	config PLAT_USRV
	65	bool "uServer"
e070fb74	66	select PLAT_HAS_INT1ICU
1da177e4 LT	67
	68	config PLAT_M32700UT
	69	bool "M32700UT"
e070fb74 HT	70	select PLAT_HAS_INT0ICU
	71	select PLAT_HAS_INT1ICU
	72	select PLAT_HAS_INT2ICU
1da177e4 LT	73	help
	74	The M3T-M32700UT is an evaluation board based on uT-Engine
	75	specification. This board has an M32700 (Chaos) evaluation chip.
	76	You can say Y for SMP, because the M32700 is a single chip
	77	multiprocessor.
	78
	79	config PLAT_OPSPUT
	80	bool "OPSPUT"
e070fb74 HT	81	select PLAT_HAS_INT0ICU
	82	select PLAT_HAS_INT1ICU
	83	select PLAT_HAS_INT2ICU
1da177e4 LT	84	help
	85	The OPSPUT is an evaluation board based on uT-Engine
	86	specification. This board has a OPSP-REP chip.
	87
	88	config PLAT_OAKS32R
	89	bool "OAKS32R"
	90	help
	91	The OAKS32R is a tiny, inexpensive evaluation board.
	92	Please note that if you say Y here and choose chip "M32102",
	93	say N for MMU and select a no-MMU version kernel, otherwise
	94	a kernel with MMU support will not work, because the M32102
	95	is a microcontroller for embedded systems and it has no MMU.
	96
	97	config PLAT_MAPPI2
	98	bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
	99
23680863 HT	100	config PLAT_MAPPI3
	101	bool "Mappi-III(M3A-2170)"
	102
9287d95e HT	103	config PLAT_M32104UT
9287d95e HT	104	bool "M32104UT"
e070fb74	105	select PLAT_HAS_INT1ICU
9287d95e HT	106	help
	107	The M3T-M32104UT is an reference board based on uT-Engine
	108	specification. This board has a M32104 chip.
	109
1da177e4 LT	110	endchoice
	111
	112	choice
	113	prompt "Processor family"
	114	default CHIP_M32700
	115
	116	config CHIP_M32700
	117	bool "M32700 (Chaos)"
	118
	119	config CHIP_M32102
	120	bool "M32102"
	121
9287d95e HT	122	config CHIP_M32104
	123	bool "M32104"
	124	depends on PLAT_M32104UT
	125
1da177e4 LT	126	config CHIP_VDEC2
	127	bool "VDEC2"
	128
	129	config CHIP_OPSP
	130	bool "OPSP"
	131
	132	endchoice
	133
	134	config MMU
	135	bool "Support for memory management hardware"
	136	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	137	default y
	138
	139	config TLB_ENTRIES
	140	int "TLB Entries"
	141	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	142	default 32 if CHIP_M32700 \|\| CHIP_OPSP
	143	default 16 if CHIP_VDEC2
	144
	145
	146	config ISA_M32R
	147	bool
9287d95e	148	depends on CHIP_M32102 \|\| CHIP_M32104
1da177e4 LT	149	default y
	150
	151	config ISA_M32R2
	152	bool
	153	depends on CHIP_M32700 \|\| CHIP_VDEC2 \|\| CHIP_OPSP
	154	default y
	155
	156	config ISA_DSP_LEVEL2
	157	bool
	158	depends on CHIP_M32700 \|\| CHIP_OPSP
	159	default y
	160
	161	config ISA_DUAL_ISSUE
	162	bool
	163	depends on CHIP_M32700 \|\| CHIP_OPSP
	164	default y
	165
e070fb74 HT	166	config PLAT_HAS_INT0ICU
	167	bool
	168	default n
	169
	170	config PLAT_HAS_INT1ICU
	171	bool
	172	default n
	173
	174	config PLAT_HAS_INT2ICU
	175	bool
	176	default n
	177
1da177e4 LT	178	config BUS_CLOCK
	179	int "Bus Clock [Hz] (integer)"
	180	default "70000000" if PLAT_MAPPI
	181	default "25000000" if PLAT_USRV
23680863	182	default "50000000" if PLAT_MAPPI3
1da177e4 LT	183	default "50000000" if PLAT_M32700UT
1da177e4 LT	184	default "50000000" if PLAT_OPSPUT
9287d95e	185	default "54000000" if PLAT_M32104UT
1da177e4 LT	186	default "33333333" if PLAT_OAKS32R
	187	default "20000000" if PLAT_MAPPI2
	188
	189	config TIMER_DIVIDE
	190	int "Timer divider (integer)"
	191	default "128"
	192
	193	config CPU_LITTLE_ENDIAN
	194	bool "Generate little endian code"
	195	default n
	196
	197	config MEMORY_START
	198	hex "Physical memory start address (hex)"
23680863	199	default "08000000" if PLAT_MAPPI \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3
1da177e4 LT	200	default "08000000" if PLAT_USRV
	201	default "08000000" if PLAT_M32700UT
	202	default "08000000" if PLAT_OPSPUT
9287d95e	203	default "04000000" if PLAT_M32104UT
1da177e4 LT	204	default "01000000" if PLAT_OAKS32R
	205
	206	config MEMORY_SIZE
	207	hex "Physical memory size (hex)"
23680863	208	default "08000000" if PLAT_MAPPI3
1da177e4 LT	209	default "04000000" if PLAT_MAPPI \|\| PLAT_MAPPI2
	210	default "02000000" if PLAT_USRV
	211	default "01000000" if PLAT_M32700UT
	212	default "01000000" if PLAT_OPSPUT
9287d95e	213	default "01000000" if PLAT_M32104UT
1da177e4 LT	214	default "00800000" if PLAT_OAKS32R
1da177e4 LT	215
3f22ab27	216	config ARCH_DISCONTIGMEM_ENABLE
1da177e4	217	bool "Internal RAM Support"
9287d95e	218	depends on CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104
1da177e4 LT	219	default y
1da177e4 LT	220
3f22ab27 DH	221	source "mm/Kconfig"
3f22ab27 DH	222
1da177e4 LT	223	config IRAM_START
1da177e4 LT	224	hex "Internal memory start address (hex)"
9287d95e HT	225	default "00f00000" if !CHIP_M32104
	226	default "00700000" if CHIP_M32104
	227	depends on (CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104) && DISCONTIGMEM
1da177e4 LT	228
	229	config IRAM_SIZE
	230	hex "Internal memory size (hex)"
9287d95e	231	depends on (CHIP_M32700 \|\| CHIP_M32102 \|\| CHIP_VDEC2 \|\| CHIP_OPSP \|\| CHIP_M32104) && DISCONTIGMEM
1da177e4	232	default "00080000" if CHIP_M32700
9287d95e	233	default "00010000" if CHIP_M32102 \|\| CHIP_OPSP \|\| CHIP_M32104
1da177e4 LT	234	default "00008000" if CHIP_VDEC2
	235
	236	#
	237	# Define implied options from the CPU selection here
	238	#
	239
95c354fe NP	240	config GENERIC_LOCKBREAK
	241	bool
	242	default y
	243	depends on SMP && PREEMPT
	244
1da177e4 LT	245	config RWSEM_GENERIC_SPINLOCK
	246	bool
	247	depends on M32R
	248	default y
	249
	250	config RWSEM_XCHGADD_ALGORITHM
	251	bool
	252	default n
	253
f0d1b0b3 DH	254	config ARCH_HAS_ILOG2_U32
	255	bool
	256	default n
	257
	258	config ARCH_HAS_ILOG2_U64
	259	bool
	260	default n
	261
6d9f937b AM	262	config GENERIC_FIND_NEXT_BIT
	263	bool
	264	default y
	265
	266	config GENERIC_HWEIGHT
	267	bool
	268	default y
	269
1da177e4 LT	270	config GENERIC_CALIBRATE_DELAY
	271	bool
	272	default y
	273
43c09ce7 HT	274	config SCHED_NO_NO_OMIT_FRAME_POINTER
	275	bool
	276	default y
	277
1da177e4 LT	278	config PREEMPT
	279	bool "Preemptible Kernel"
	280	help
	281	This option reduces the latency of the kernel when reacting to
	282	real-time or interactive events by allowing a low priority process to
	283	be preempted even if it is in kernel mode executing a system call.
	284	This allows applications to run more reliably even when the system is
	285	under load.
	286
	287	Say Y here if you are building a kernel for a desktop, embedded
	288	or real-time system. Say N if you are unsure.
	289
1da177e4 LT	290	config SMP
1da177e4 LT	291	bool "Symmetric multi-processing support"
7b7426c8	292	select USE_GENERIC_SMP_HELPERS
1da177e4 LT	293	---help---
	294	This enables support for systems with more than one CPU. If you have
	295	a system with only one CPU, like most personal computers, say N. If
	296	you have a system with more than one CPU, say Y.
	297
	298	If you say N here, the kernel will run on single and multiprocessor
	299	machines, but will use only one CPU of a multiprocessor machine. If
	300	you say Y here, the kernel will run on many, but not all,
	301	singleprocessor machines. On a singleprocessor machine, the kernel
	302	will run faster if you say N here.
	303
	304	People using multiprocessor machines who say Y here should also say
	305	Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	306	Management" code will be disabled if you say Y here.
	307
03502faa	308	See also the SMP-HOWTO available at
1da177e4 LT	309	<http://www.linuxdoc.org/docs.html#howto>.
	310
	311	If you don't know what to do here, say N.
	312
	313	config CHIP_M32700_TS1
	314	bool "Workaround code for the M32700 TS1 chip's bug"
	315	depends on (CHIP_M32700 && SMP)
	316	default n
	317
	318	config NR_CPUS
	319	int "Maximum number of CPUs (2-32)"
	320	range 2 32
	321	depends on SMP
	322	default "2"
	323	help
	324	This allows you to specify the maximum number of CPUs which this
	325	kernel will support. The maximum supported value is 32 and the
	326	minimum value which makes sense is 2.
	327
	328	This is purely to save memory - each supported CPU adds
	329	approximately eight kilobytes to the kernel image.
	330
	331	# Common NUMA Features
	332	config NUMA
	333	bool "Numa Memory Allocation Support"
c5596b26	334	depends on SMP && BROKEN
1da177e4 LT	335	default n
1da177e4 LT	336
c80d79d7 YG	337	config NODES_SHIFT
	338	int
	339	default "1"
	340	depends on NEED_MULTIPLE_NODES
	341
1da177e4 LT	342	# turning this on wastes a bunch of space.
	343	# Summit needs it only when NUMA is on
	344	config BOOT_IOREMAP
	345	bool
	346	depends on NUMA
	347	default n
	348
	349	endmenu
	350
	351
	352	menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
	353
	354	config PCI
	355	bool "PCI support"
c3a0f771	356	depends on BROKEN
1da177e4 LT	357	default n
	358	help
	359	Find out whether you have a PCI motherboard. PCI is the name of a
	360	bus system, i.e. the way the CPU talks to the other stuff inside
	361	your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	362	VESA. If you have PCI, say Y, otherwise N.
	363
1da177e4 LT	364	choice
	365	prompt "PCI access mode"
	366	depends on PCI
	367	default PCI_GOANY
	368
	369	config PCI_GOBIOS
	370	bool "BIOS"
	371	---help---
	372	On PCI systems, the BIOS can be used to detect the PCI devices and
	373	determine their configuration. However, some old PCI motherboards
	374	have BIOS bugs and may crash if this is done. Also, some embedded
	375	PCI-based systems don't have any BIOS at all. Linux can also try to
	376	detect the PCI hardware directly without using the BIOS.
	377
	378	With this option, you can specify how Linux should detect the PCI
	379	devices. If you choose "BIOS", the BIOS will be used, if you choose
	380	"Direct", the BIOS won't be used, and if you choose "Any", the
	381	kernel will try the direct access method and falls back to the BIOS
	382	if that doesn't work. If unsure, go with the default, which is
	383	"Any".
	384
	385	config PCI_GODIRECT
	386	bool "Direct"
	387
	388	config PCI_GOANY
	389	bool "Any"
	390
	391	endchoice
	392
	393	config PCI_BIOS
	394	bool
	395	depends on PCI && (PCI_GOBIOS \|\| PCI_GOANY)
	396	default y
	397
	398	config PCI_DIRECT
	399	bool
	400	depends on PCI && (PCI_GODIRECT \|\| PCI_GOANY)
	401	default y
	402
	403	source "drivers/pci/Kconfig"
	404
	405	config ISA
1b20b093	406	bool
1da177e4 LT	407
	408	source "drivers/pcmcia/Kconfig"
	409
	410	source "drivers/pci/hotplug/Kconfig"
	411
	412	endmenu
	413
	414
	415	menu "Executable file formats"
	416
	417	source "fs/Kconfig.binfmt"
	418
	419	endmenu
	420
d5950b43 SR	421	source "net/Kconfig"
d5950b43 SR	422
1da177e4 LT	423	source "drivers/Kconfig"
	424
	425	source "fs/Kconfig"
	426
1da177e4 LT	427	source "arch/m32r/Kconfig.debug"
	428
	429	source "security/Kconfig"
	430
	431	source "crypto/Kconfig"
	432
	433	source "lib/Kconfig"