time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver
[deliverable/linux.git] / arch / m68k / platform / 68328 / timers.c
CommitLineData
75003c48
GU
1/***************************************************************************/
2
3/*
4 * linux/arch/m68knommu/platform/68328/timers.c
5 *
6 * Copyright (C) 1993 Hamish Macdonald
7 * Copyright (C) 1999 D. Jeff Dionne
8 * Copyright (C) 2001 Georges Menie, Ken Desmet
9 *
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive
12 * for more details.
13 */
14
15/***************************************************************************/
16
75003c48
GU
17#include <linux/types.h>
18#include <linux/kernel.h>
19#include <linux/mm.h>
1ea9acc7 20#include <linux/interrupt.h>
be03e56b 21#include <linux/irq.h>
36a90f26 22#include <linux/clocksource.h>
75003c48
GU
23#include <asm/setup.h>
24#include <asm/system.h>
25#include <asm/pgtable.h>
75003c48
GU
26#include <asm/machdep.h>
27#include <asm/MC68VZ328.h>
28
29/***************************************************************************/
30
31#if defined(CONFIG_DRAGEN2)
32/* with a 33.16 MHz clock, this will give usec resolution to the time functions */
33#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK
34#define CLOCK_PRE 7
35#define TICKS_PER_JIFFY 41450
36
37#elif defined(CONFIG_XCOPILOT_BUGS)
38/*
39 * The only thing I know is that CLK32 is not available on Xcopilot
40 * I have little idea about what frequency SYSCLK has on Xcopilot.
41 * The values for prescaler and compare registers were simply
42 * taken from the original source
43 */
44#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK
45#define CLOCK_PRE 2
46#define TICKS_PER_JIFFY 0xd7e4
47
48#else
49/* default to using the 32Khz clock */
50#define CLOCK_SOURCE TCTL_CLKSOURCE_32KHZ
51#define CLOCK_PRE 31
52#define TICKS_PER_JIFFY 10
53#endif
54
36a90f26
GU
55static u32 m68328_tick_cnt;
56
57/***************************************************************************/
58
59static irqreturn_t hw_tick(int irq, void *dummy)
60{
61 /* Reset Timer1 */
62 TSTAT &= 0;
63
64 m68328_tick_cnt += TICKS_PER_JIFFY;
65 return arch_timer_interrupt(irq, dummy);
66}
67
75003c48
GU
68/***************************************************************************/
69
be03e56b 70static struct irqaction m68328_timer_irq = {
84675716
GU
71 .name = "timer",
72 .flags = IRQF_DISABLED | IRQF_TIMER,
73 .handler = hw_tick,
be03e56b
GU
74};
75
36a90f26
GU
76/***************************************************************************/
77
8e19608e 78static cycle_t m68328_read_clk(struct clocksource *cs)
36a90f26
GU
79{
80 unsigned long flags;
81 u32 cycles;
82
83 local_irq_save(flags);
84 cycles = m68328_tick_cnt + TCN;
85 local_irq_restore(flags);
86
87 return cycles;
88}
89
90/***************************************************************************/
91
92static struct clocksource m68328_clk = {
93 .name = "timer",
94 .rating = 250,
95 .read = m68328_read_clk,
96 .shift = 20,
97 .mask = CLOCKSOURCE_MASK(32),
98 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
99};
100
101/***************************************************************************/
102
84675716 103void hw_timer_init(void)
75003c48
GU
104{
105 /* disable timer 1 */
106 TCTL = 0;
107
108 /* set ISR */
be03e56b 109 setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
75003c48
GU
110
111 /* Restart mode, Enable int, Set clock source */
112 TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
113 TPRER = CLOCK_PRE;
114 TCMP = TICKS_PER_JIFFY;
115
116 /* Enable timer 1 */
117 TCTL |= TCTL_TEN;
36a90f26
GU
118 m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
119 clocksource_register(&m68328_clk);
75003c48
GU
120}
121
122/***************************************************************************/
123
124void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec)
125{
126 long now = RTCTIME;
127
128 *year = *mon = *day = 1;
129 *hour = (now >> 24) % 24;
130 *min = (now >> 16) % 60;
131 *sec = now % 60;
132}
133
134/***************************************************************************/
This page took 0.672039 seconds and 5 git commands to generate.